Cisco ONS 15454 SDH Reference Manual, Release 8.5.4
Appendix A, Hardware Specifications
Downloads: This chapterpdf (PDF - 696.0KB) The complete bookPDF (PDF - 13.06MB) | Feedback

Hardware Specifications

Table Of Contents

Hardware Specifications

A.1  Shelf Specifications

A.1.1  Bandwidth

A.1.2  Configurations

A.1.3  Cisco Transport Controller

A.1.4  External LAN Interface

A.1.5  Alarm Interface

A.1.6  Database Storage

A.1.7  Timing Interface

A.1.8  System Timing

A.1.9  System Power

A.1.10  Fan Tray

A.1.11  System Environmental Specifications

A.1.12  Dimensions

A.2  SFP and XFP Specifications

A.3  General Card Specifications

A.3.1  Power Consumption

A.3.2  Temperature Ranges

A.4  Common Control Card Specifications

A.4.1  TCC2 Card Specifications

A.4.2  TCC2P Card Specifications

A.4.3  XC10G Card Specifications

A.4.4  XC-VXL-10G Card Specifications

A.4.5  XC-VXL-2.5G Card Specifications

A.4.6  XC-XVC-10G Card Specifications

A.4.7  AIC-I Specifications

A.5  Electrical Card and FMEC Specifications

A.5.1  E1-42 Card Specifications

A.5.2  E3-12 Card Specifications

A.5.3  DS3i-N-12 Card Specifications

A.5.4  STM1E-12 Card Specifications

A.5.5  FILLER Card

A.5.6  FMEC E1-120NP Specifications

A.5.7  FMEC E1-120PROA Specifications

A.5.8  FMEC E1-120PROB Specifications

A.5.9  E1-75/120 Impedance Conversion Panel Specifications

A.5.10  FMEC-E3/DS3 Specifications

A.5.11  FMEC STM1E 1:1 Specifications

A.5.12  BLANK-FMEC Specifications

A.5.13  MIC-A/P Specifications

A.5.14  MIC-C/T/P Specifications

A.6  Optical Card Specifications

A.6.1  OC3 IR 4/STM1 SH 1310 Card Specifications

A.6.2  OC3 IR/STM1 SH 1310-8 Card Specifications

A.6.3  OC12 IR/STM4 SH 1310 Card Specifications

A.6.4  OC12 LR/STM4 LH 1310 Card Specifications

A.6.5  OC12 LR/STM4 LH 1550 Card Specifications

A.6.6  OC12 IR/STM4 SH 1310-4 Card Specifications

A.6.7  OC48 IR/STM16 SH AS 1310 Card Specifications

A.6.8  OC48 LR/STM16 LH AS 1550 Card Specifications

A.6.9  OC48 ELR/STM16 EH 100 GHz Card Specifications

A.6.10  OC192 SR/STM64 IO 1310 Card Specifications

A.6.11  OC192 IR/STM64 SH 1550 Card Specifications

A.6.12  OC192 LR/STM64 LH 1550 Card Specifications

A.6.13  OC192 LR/STM64 LH ITU 15xx.xx Card Specifications

A.6.14  15454_MRC-12 Card Specifications

A.6.15  MRC-2.5G-12 Card Specifications

A.6.16  OC192SR1/STM64IO Short Reach Card Specifications

A.6.17  OC192/STM64 Any Reach Card Specifications

A.7  Ethernet Card Specifications

A.7.1  E100T-G Card Specifications

A.7.2  E1000-2-G Card Specifications

A.7.3  CE-1000-4 Card Specifications

A.7.4  CE-100T-8 Card Specifications

A.7.5  CE-MR-10 Card Specifications

A.7.6  G1K-4 Card Specifications

A.7.7  ML100T-12 Card Specifications

A.7.8  ML1000-2 Card Specifications

A.7.9  ML100X-8 Card Specifications

A.7.10  ML-MR-10 Card Specifications

A.8  Storage Access Networking Card Specifications

A.8.1  FC_MR-4 Card Specifications


Hardware Specifications


This appendix contains hardware and software specifications for the ONS 15454 SDH, including:

Shelf Specifications

SFP and XFP Specifications

General Card Specifications

Common Control Card Specifications

Electrical Card and FMEC Specifications

Optical Card Specifications

Ethernet Card Specifications

Storage Access Networking Card Specifications

A.1  Shelf Specifications

This section provides specifications for shelf bandwidth; a list of topologies; Cisco Transport Controller (CTC) specifications; LAN, TL1, modem, alarm, and electrical interface assembly (EIA) interface specifications; database, timing, power, and environmental specifications; and shelf dimensions.

A.1.1  Bandwidth

The ONS 15454 SDH has the following bandwidth specifications:

60 Gbps per shelf

Total bandwidth: 180 Gbps per rack (assuming there are 3 shelves)

Data plane bandwidth: 120 Gbps per rack (assuming there are 3 shelves)

SDH plane bandwidth: 60 Gbps per rack (assuming there are 3 shelves)

A.1.2  Configurations

The ONS 15454 SDH can be configured as follows:

Digital cross-connect

Terminal mode

Linear add-drop multiplexer (ADM)

Two-fiber multiplex section-shared protection ring (MS-SPRing)

Four-fiber MS-SPRing

Multiring interconnection

Subnetwork connection protection (SNCP)

Extended SNCP

Virtual rings

Hybrid SDH network topology

Regenerator mode

Wavelength multiplexer

A.1.3  Cisco Transport Controller

CTC, the ONS 15454 SDH craft interface software, has the following specifications:

10BaseT

TCC2/TCC2P access: RJ-45 connector

Front Mount Electrical Connection (FMEC) access: LAN connector on MIC-C/T/P faceplate

A.1.4  External LAN Interface

The ONS 15454 SDH external LAN interface has the following specifications:

10BaseT Ethernet

FMEC access: LAN connector on MIC-C/T/P faceplate

A.1.5  Alarm Interface

The ONS 15454 SDH alarm interface has the following specifications:

Visual: Critical, Major, Minor, Remote

Audible: Critical, Major, Minor, Remote

Alarm inputs: Common 32-VDC output for all alarm-inputs, closed contact limited to 2 mA

Control outputs: Open contact maximum 60 VDC, closed contact maximum 100 mA

FMEC access: 62-Pin DB connector on the MIC-A/P faceplate

A.1.6  Database Storage

The ONS 15454 SDH has the following database storage specifications:

Nonvolatile memory: 128 MB, 3.0 V flash memory

A.1.7  Timing Interface

The ONS 15454 SDH timing interface has the following specifications:

2 coaxial inputs

2 coaxial outputs

FMEC access: 1.0/2.3 miniature coax connectors on the MIC-C/T/P faceplate

A.1.8  System Timing

The ONS 15454 SDH has the following system timing specifications:

Stratum 3E, per ITU-T G.813

Free running accuracy: +/- 4.6 ppm

Holdover stability: 3.7 exp -7/day, including temperature (< 255 slips in first 24 hours)

Reference: External building integrated timing supply (BITS), line, internal

A.1.9  System Power

The ONS 15454 SDH has the following power specifications:

Input voltage: -48 VDC

Maximum Current Rating: 24 A (at -48 VDC)

Power requirements:

Nominal: -48 VDC

Tolerance limits: -40.5 to -57.0 VDC

Power terminals: 3WK3 Combo-D power cable connector (MIC-A/P and MIC-C/T/P faceplates)

Fusing: Maximum 30 A fuse panel

A.1.10  Fan Tray

Table A-1 lists power requirements for the fan-tray assembly.

Table A-1 Fan Tray Assembly Power Requirements

Fan Tray Assembly
Watts
Amps
BTU/Hr
Fan Tray -48Vdc

129.60

2.7

442.21

15454E-CC-FTA

115

2.4

393


A.1.11  System Environmental Specifications

The ONS 15454 SDH has the following environmental specifications:

Operating temperature: 0 to +40 degrees Celsius (32 to 104 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

A.1.12  Dimensions

The ONS 15454 SDH shelf assembly has the following dimensions:

Height: 616.5 mm (24.27 in.)

Width: 535 mm (17 in.) without mounting ears attached

Depth: 280 mm (11.02 in.)

Weight: 26 kg (57.3 lb) empty

A.2  SFP and XFP Specifications

Table A-2 lists the specifications for the available Small Form-factor Pluggables (SFPs) and 10 Gbps Pluggables (XFPs). In the table, the following acronyms are used:

ESCON = Enterprise System Connection

FICON = fiber connectivity

GE = Gigabit Ethernet

FE = Fast Ethernet

E = Ethernet (10 Mbps)

FC = Fibre Channel

HDTV = high definition television

DWDM = dense wavelength division multiplexing

CWDM = coarse wavelength division multiplexing

Table A-2 SFP and XFP Specifications 

SFP/XFP Product ID
Interface
Transmitter Output Power Min/Max (dBm)
Receiver Input Power Min/Max (dBm)

15454-SFP-LC-SX/
15454E-SFP-LC-SX

GE

-9.5 to -4

-17 to 0

15454-SFP-LC-LX/
15454E-SFP-LC-LX

GE

-9.5 to -3

-19 to -3

15454-SFP3-1-IR=

OC-3

-15 to -8

-23 to -8

15454E-SFP-L.1.1=

STM-1

-15 to -8

-34 to -10

15454-SFP12-4-IR=

OC-12, D1 Video

-15 to -8

-28 to -7

15454E-SFP-L.4.1=

STM-4, D1 Video

-15 to -8

-28 to -8

15454-SFP-OC48-IR=

OC-48, DV6000 (C-Cor)

-5 to 0

-18 to 0

ONS-SE-2G-S1=

OC-48, STM-16

-10 to -3

-18 to -3

15454E-SFP-L.16.1=

STM-16, DV6000 (C-Cor)

-5 to 0

-18 to 0

15454-SFP-200/
15454E-SFP-200

ESCON

-8 to -4

-28 to -3

15454-SFP-GEFC-SX=/
15454E-SFP-GEFC-S=

FC (1 and 2 Gbps), FICON, GE

-10 to -3.5

-17 to 0 (1FC and 1GE)

-15 to 0 (2FC)

15454-SFP-GE+-LX=/
15454E-SFP-GE+-LX=

FC (1 and 2 Gbps), FICON, GE, HDTV

-9.5 to -3.0

-20 to -3
(1FC, 1GE, and 2FC)

ONS-SI-2G-S1

OC-48 SR

-10 to -3

-18 to -3

ONS-SI-2G-I1

OC-48 IR1

-5 to 0

-18 to 0

ONS-SI-2G-L1

OC-48 LR1

-2 to +3

-27 to -9

ONS-SI-2G-L2

OC-48 LR2

-2 to +3

-28 to -9

ONS-SC-2G-28.71 through
ONS-SC-2G-60.6

OC-48 DWDM

0 to +4

-28 to -9

ONS-SI-622-I1

OC-3/OC-12 IR1 Dual rate

-15 to -8

-28 to -8

ONS-SI-622-L1

OC-21 LR1

-3 to +2

-28 to -8

ONS-SI-622-L2

OC-12 LR2

-3 to +2

-28 to -8

ONS-SE-622-1470 through
ONS-SE-622-1610

OC-12 CWDM

0 to +5

-28 to -7

ONS-SI-155-I1

OC-3 IR1

-15 to -8

-28 to -8

ONS-SI-155-L1

OC-3 LR1

-5 to 0

-34 to -10

ONS-SI-155-L2

OC-3 LR2

-5 to 0

-34 to -10

ONS_SE-155-1470 through
ONS-SE-155-1610

OC-3 CWDM

0 to +5

-34 to -7

ONS-XC-10G-S1

OC-192 SR1

-6 to -1

-11 to -1

ONS-XC-10G-I2

OC-192 IR2

-1 to +2

-14 to +2

ONS-XC-10G-L2

OC-192 LR2

0 to +4

-24 to -7

ONS-XC-10G-30.3= through ONS-XC-10G-61.4=

OC-192/STM64/10GE

-1 to +3

-27 to -7

ONS-SE-100-FX

Fast Ethernet

-20 to -14

-30 to -14

ONS-SE-100-LX10

Fast Ethernet

-15 to -8

-25 to -8

ONS-SI-155-I1-MM=

OC-3, STM-1

-19 to -14

-14 to -5

ONS-SI-622-I1-MM=

OC-12, STM-4

-19 to -14

-14 to -5

ONS-SC-Z3-1470= through
ONS-SC-Z3-1610=

OC48/STM16/GE

0 to +5

-7 (min)

ONS-SE-Z1=

OC-3/STM1
OC-12/STM-4
OC-48/STM-16
Fibre Channel
(1 and 2 Gbps)
GE

-5 to 0

-10 to -23 (OC-3)
0 to -23 (OC-12)
-18 to 0 (OC-48)
0 to -21 (Fibre Channel)
0 to -2 (GE)

ONS-SI-2G-S1

OC-48/STM-16

-10 to -3

-3 min

ONS-SE-155-1470 through
ONS-SE-155-1610

OC-3/STM-1

0 to +5

-7 to 0

ONS-SE-622-1470 through
ONS-SE-622-1610

OC-12/STM-4

0 to +5

-7 to 0

ONS-SI-GE-SX

GE

-9.5 to -3

0 to -17

ONS-SI-GE-LX

GE

-9.5 to +3

-3 to -17

ONS-SI-GE-ZX

GE

+5 to 0

0 to -23

ONS-SI-100-FX

FE

 —

 —

ONS-SI-100-LX10

FE

 —

 —

ONS-SE-ZE-EL

E, FE, or GE

 —

 —

ONS-SE-100-BX10U

FE

-14 to -8

-8 to -28.2

ONS-SE-100-BX10D

FE

-14 to -8

-8 to -28.2

ONS-SE-200-MM=

ESCON

-20.5 to -15

-14 to -292

ONS-SE-G2F-SX=

Fibre Channel (1 and 2 Gbps), GE

-9.5 to 0 (GE)
-10 to -3.5 (1G and 2G FC/FICON)

-17 to 03 (GE)
-22 (1G FC/FICON)
-20 (2G FC/FICON)

ONS-SE-G2F-LX=

Fibre Channel (1 and 2 Gbps), FICON, GE, HDTV

-9.5 to -3 (GE)
-10 to -3.5 (1FC, 2FC, and FICON)

-19 to -34 (GE)
-22 (1G FC/FICON)
-21 (2G FC/FICON)

ONS-SC-GE-SX=

GE

-9.5 to 0

-17 to 02

ONS-SC-GE-LX=

GE

-9.5 to-3

-19 to -33

1 ONS-SC-2G-28.7, ONS-SC-2G-33.4, ONS-SC-2G-41.3, ONS-SC-2G-49.3, and ONS-SC-2G-57.3 are supported from Release 8.5 and later.

2 Based on any valid 8B/10B code pattern measured at, or extrapolated to, 10E-15 BER measured at center of eye

3 Minimum Stressed Sensitivity (10-12): -12.5(62.5um) and -13.5(50um) dBm

4 Minimum Stressed Sensitivity (10-12): -14.4 dBm


A.3  General Card Specifications

This section provides power consumption and temperature ranges for all ONS 15454 SDH cards.

A.3.1  Power Consumption

Table A-3 provides power consumption information for the ONS 15454 SDH cards.

Table A-3 Individual Card Power Requirements 

Card Type
Card Name
Watts
Amperes
BTU/Hr
Control Cards

TCC2

18.72

0.39 (0.213 at -60 V)

63.88

TCC2P

27.00

0.56

92.2

XC-VXL-10G

54.24

1.13

185.07

XC-VXL-2.5G

81.30

1.69

277.6

XC-VXC-10G

67

1.4

228.62

AIC-I

4.80

0.10

16.38

Electrical Cards

E1-42

43.2

0.90

147.40

E3-12

38.20

0.92

130.35

DS3i-N-12

19.0

0.80

64.83

STM1E-12

59.40

1.24

202.8

FMECs

FMEC E1-120NP

0.00

0.00

0.0

FMEC E1-120PROA

-0.1

through E1-42

FMEC E1-120PROB

-0.1

through E1-42

E1-75/120

0.00

0.00

0.0

FMEC-E3/DS3

0.00

0.00

0.0

FMEC STM1E 1:1

-8.8

through STM1E-12

MIC-A/P

-0.13

through TCC2/TCC2P

MIC-C/T/P

-0.38

through TCC2/TCC2P

Optical Cards

OC3 IR 4/STM1 SH 1310

19.20

0.40

65.6

OC3IR/STM1SH 1310-8

23.00

0.48

78.5

OC12 IR/STM4 SH 1310

9.28

0.19

31.7

OC12 LR/STM4 LH 1310

9.28

0.19

31.7

OC12 LR/STM4 LH 1550

9.28

0.19

31.7

OC12 LR/STM4 SH 1310-4

35.60

0.74

121.6

OC48 IR/STM16 SH AS 1310

37.20

0.78

127.0

OC48 LR/STM16 LH AS 1550

37.20

0.78

127.0

OC48 ELR/STM16 EH 100 GHz

31.20

0.65

106.5

OC192 SR/STM64 IO 1310

42.00

0.88

143.4

OC192 IR/STM64 SH 1550

44.00

0.92

150.2

OC192 LR/STM64 LH 1550

72.20

1.50

246.5

OC192 LR/STM64 LH ITU 15xx.xx

46.00

0.96

157.1

15454_MRC-12

38

0.79

129.66

MRC-2.5G-12

38

0.79

129.66

OC192SR1/STM64IO Short Reach and OC192/STM64 Any Reach1

40

0.83

136.49

Ethernet Cards

E100T-G

60.96

1.27

208.00

E1000-2-G

38.88 (including GBICs)

0.81

182.67

G1K-4

55.20 (including GBICs)

1.15

215.11

ML100T-12

53.00

1.10

181.0

ML1000-2

44.1(including SFPs)

0.92

167.3

ML100X-8

65

1.35

221.93

ML-MR-10

100

N/A

N/A

CE-100T-8

53.14

1.10

181.3

CE-1000-4

60

1.25

204.80

CE-MR-10

95

1.35

221.93

Storage Access Networking

FC_MR-4 (Fibre Channel)

60

1.25

204.80

1 These cards are referred to as OC192-XFP in CTC.


A.3.2  Temperature Ranges

Table A-4 provides temperature ranges and product names for ONS 15454 SDH cards.


Note The I-Temp symbol is displayed on the faceplate of an I-Temp compliant card. A card without this symbol is C-Temp compliant.


Table A-4 Card Temperature Ranges and Product Names 

Card Type
Card Name
C-Temp Product Name
(0 to +55 degrees Celsius, 32 to 131 degrees Fahrenheit)
I-Temp Product Name
(-40 to +65 degrees Celsius, -40 to 149 degrees Fahrenheit)
Control Cards

TCC2

15454-TCC2

TCC2P

15454-TCC2P

XC-VXL-10G

15454E-XC-VXL10G

XC-VXL-2.5G

15454E-XC-VXL-2.5G

XC-VXC-10G

15454-XC-VXC-10G-T

AIC-I

15454-AIC-I

Electrical

E1-42

15454E-1-42

E3-12

15454E-3-12

DS3i-N-12

15454E-DS3i-N-12

STM1E-12

15454E-STM1E-12

FMEC E1-120NP

15454E-FMEC E1-120NP

FMEC E1-120PROA

15454E-FMEC E1-120PROA

FMEC E1-120PROB

15454E-FMEC E1-120PROB

E1-75/120

15454E-E1-75/120

FMEC-E3/DS3

15454E-FMEC-E3/DS3

FMEC STM1E 1:1

15454E-FMEC STM1E 1:1

MIC-A/P

15454E-MIC-A/P

MIC-C/T/P

15454E-MIC-C/T/P

Optical

OC3 IR 4/STM1 SH 1310

15454E-S1.1-4

OC3 IR/STM1 SH 1310-8

15454E-S1.1-8

OC12 IR/STM4 SH 1310

15454E-S4.1-1

OC12 LR/STM4 LH 1310

15454E-L4.1-1

OC12 LR/STM4 LH 1550

15454E-L4.2-1

OC12 LR/STM4 SH 1310-4

15454E-L4.1-4

OC48 IR/STM16 SH AS 1310

15454E-S16.1-1

OC48 LR/STM16 LH AS 1550

15454E-S16.2-1

OC48 ELR/STM16 EH 100 GHz

15454E-EL16HXXXX

OC192 SR/STM64 IO 1310

15454E-I65.1

OC192 IR/STM64 SH 1550

15454E-S64.2

OC192 LR/STM64 LH 1550

15454E-L64.2.1

OC192 LR/STM64 LH ITU 15xx.xx

15454E-64-LXX.X

15454_MRC-12

15454-MRC-12-T

MRC-2.5G-12

15454-MRC-12-2.5GI

OC192SR1/STM64IO Short Reach and OC192/STM64 Any Reach1

15454_OC192SR1/
STM64IO Short Reach and 15454_OC192/
STM64 Any Reach

Ethernet

E100T-G

15454-E100T-G

E1000-2-G

15454-E1000-2-G

G1K-4

15454-G1K-4

ML100T-12

15454-ML100T-12

ML1000-2

15454-ML1000-2

ML100X-8

15454-ML100X-8

CE-100T-8

15454-CE100T-8

ML-MR-10

15454-ML-MR-10

CE-1000-4

15454-CE1000-4

CE-MR-10

15454-CE-MR-10

Storage Access Networking

FC_MR-4

15454-FC_MR-4

1 These cards are referred to as OC192-XFP in CTC.


A.4  Common Control Card Specifications

This section provides specifications for the common control cards.

For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information document.

A.4.1  TCC2 Card Specifications

The TCC2 card has the following specifications:

CTC software

Interface: EIA/TIA-232 (local craft access, on TCC2 faceplate)

Interface: 10BaseT LAN (on TCC2 faceplate)

Interface: 10BaseT LAN (through backplane, access on the MIC-A/P card)

Synchronization

Stratum 3, per ITU-T G.812

Free running access: Accuracy +/- 4.6 ppm

Holdover stability: 3.7 * 10 exp - 7 per day including temperature (< 255 slips in first 24 hours)

Reference: External BITS, line, internal

Supply voltage monitoring

Both supply voltage inputs are monitored

Normal operation:

-40.5 to -56.7 V (in -48 VDC systems)

-50.0 to -72.0 V (in -60 VDC systems)

Undervoltage: Major alarm

Overvoltage: Major alarm

Environmental

Operating temperature: -40 to +55 degrees Celsius (-40 to +149 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 26.00 W, 0.54 A at -48 V, 0.43 A at -60 V, 88.8 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.7 kg (1.5 lb)

A.4.2  TCC2P Card Specifications

The TCC2P card has the following specifications:

CTC software

Interface: EIA/TIA-232 (local craft access, on TCC2P faceplate)

Interface: 10BaseT LAN (on TCC2P faceplate)

Interface: 10BaseT LAN (through backplane, access on the MIC-A/P card)

Security communication protocols such as SSH, SSL, and HTTPS are optional

Synchronization

Stratum 3, per ITU-T G.812

Free running access: Accuracy +/- 4.6 ppm

Holdover stability: 3.7 * 10 exp - 7 per day including temperature (< 255 slips in first 24 hours)

Reference: External BITS, line, internal

Supply voltage monitoring

Both supply voltage inputs are monitored

Normal operation:

-40.5 to -56.7 V (in -48 VDC systems)

-50.0 to -72.0 V (in -60 VDC systems)

Undervoltage: Major alarm

Overvoltage: Major alarm

Environmental

Operating temperature: -40 to +55 degrees Celsius (-40 to +149 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 26.00 W, 0.54 A at -48 V, 0.43 A at -60 V, 88.8 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.7 kg (1.5 lb)

A.4.3  XC10G Card Specifications

The XC10G card has the following specifications:

Environmental

Operating temperature:

C-Temp (15454-XC-10G): 32 to 131 degrees Fahrenheit (0 to +55 degrees Celsius)

Operating humidity: 5 to 85 percent, noncondensing

Power consumption: 48 W, 1.00 A, 163.68 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Card weight: 1.5 lb (0.6 kg)

A.4.4  XC-VXL-10G Card Specifications

The XC-VXL-10G card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 85 percent, noncondensing

Power consumption: 81.30 W, 1.69 A at -48 V, 277.6 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.6 kg (1.5 lb)

A.4.5  XC-VXL-2.5G Card Specifications

The XC-VXL-2.5G card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 85 percent, noncondensing

Power consumption: 81.30 W, 1.69 A at -48 V, 277.6 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.6 kg (1.5 lb)

A.4.6  XC-XVC-10G Card Specifications

Environmental

Operating temperature:

I-Temp (15454-XC-VXC-10G-T): -40 to 149 degrees Fahrenheit (-40 to +55 degrees Celsius)

Operating humidity: 5 to 85 percent, noncondensing

Power consumption: 67 W, 1.25 A, 204.73 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Weight (not including clam shell): 1.5 lb (0.6 kg)

A.4.7  AIC-I Specifications

The AIC-I card has the following specifications:

Alarm inputs

Number of inputs: 16

Opto-coupler isolated

Label customer provisionable

Severity customer provisionable

Common 32-V output for all alarm-inputs

Each input limited to 2 mA

Termination through MIC-A/P

Alarm outputs

Number of outputs: 4 (user configurable as inputs)

Switched by opto-MOS (metal oxide semiconductor)

Triggered by definable alarm condition

Maximum allowed open circuit voltage: 60 VDC

Maximum allowed closed circuit current: 100 mA

Termination through MIC-A/P

EOW/LOW

ITU-T G.711, ITU-T G.712, Telcordia GR-253-CORE

A-law, mu-law


Note Due to the nature of mixed coding, in a mixed-mode configuration (A-law/mu-law) the orderwire is not ITU-T G.712 compliant.


Orderwire party line

Dual tone multifrequency (DTMF) signaling

User data channel (UDC)

Bit rate: 64 kbps, codirectional

ITU-T G.703

Input/output impedance: 120 ohms

Termination: RJ-11 connectors

Generic communications channel (GCC)

Bit rate: 576 kbps

EIA/TIA-485/V11

Input/output impedance: 120 ohms

Termination: RJ-45 connectors

ACC connection for additional alarm interfaces

For future use

Environmental

Operating temperature: -40 to +55 degrees Celsius (-40 to +149 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 8.00 W, 0.17 A, 27.3 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Weight (not including clam shell): 1.8 lb (0.82 kg)

A.5  Electrical Card and FMEC Specifications

This section provides specifications for the electrical and Front Mount Electrical Connection (FMEC) cards.

For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information document.

A.5.1  E1-42 Card Specifications

The E1-42 card has the following specifications:

E1-42 input

Bit rate: 2.048 Mbps +/-50 ppm

Frame format: Unframed, ITU-T G.704 framed

Line code: HDB-3

Termination: Through FMEC E1-120NP, FMEC E1-120PROA, or FMEC E1-120PROB

Input impedance: 120 ohms balanced (75 ohms unbalanced with additional E1-75/120)

Cable loss: 0 to 6 dB at 1024 kHz (for cable length, see the specification of the cable that you are using)

AIS: ITU-T G.704 compliant

E1-42 output

Bit rate: 2.048 Mbps +/-50 ppm

Frame format: Unframed, ITU-T G.704 framed

Line code: HDB-3

Termination: Through FMEC E1-120NP, FMEC E1-120PROA, or FMEC E1-120PROB

Output impedance: 120 ohms balanced (75 ohms unbalanced with additional E1-75/120)

AIS: ITU-T G.704 compliant

Pulse shape: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15

Pulse amplitude: 3 V +/- 5 percent zero-peak at 120 ohms; 2.37 V +/-5 percent zero-peak at 75 ohms

Loopback modes: Terminal and facility

Environmental

Overvoltage protection: As in ITU-T G.703 Annex B

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 38.10 W, 0.79 A at -48 V, 130.1 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.8 kg (1.9 lb)

A.5.2  E3-12 Card Specifications

The E3-12 card has the following specifications:

E3-12 input

Bit rate: 34.368 Mbps +/-20 ppm

Line code: HDB-3

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss: Up to 12 dB at 17184 kHz (for cable length, see the specification of the cable that you are using)

AIS: ITU-T G.704 compliant

E3-12 output

Bit rate: 34.368 Mbps +/- 20 ppm

Line code: HDB-3

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

AIS: ITU-T G.704 compliant

Power level: -1.8 to +5.7 dBm

Pulse shape: ITU-T G.703, Figure 17

Pulse amplitude: 0.36 to 0.85 V peak-to-peak

Loopback modes: Terminal and facility

E3-12 electrical interface

Connectors: 1.0/2.3 miniature coax connectors in the FMEC-E3/DS3 card

Environmental

Overvoltage protection: As in ITU-T G.703 Annex B

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 38.20 W, 0.80 A at -48 V, 130.4 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.7 kg (1.7 lb)

A.5.3  DS3i-N-12 Card Specifications

The DS3i-N-12 card has the following specifications:

DS3i-N-12 input

Bit rate: 44.736 Mbps +/-20 ppm

Frame format: ITU-T G.704, ITU-T G.752/DS-3 ANSI T1.107-1988

Line code: B3ZS

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/- 5 percent

Cable loss:

Maximum 137 m (450 ft): 734A, RG59, 728A

Maximum 24 m (79 ft): RG179

AIS: ITU-T G.704 compliant

DS3i-N-12 output

Bit rate: 44.736 Mbps +/- 20 ppm

Frame format: ITU-T G.704, ITU-T G.752/DS-3 ANSI T1.107-1988

Line code: B3ZS

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

AIS: ITU-T G.704 compliant

Power level: -1.8 to +5.7 dBm


Note The power level is for a signal of all ones and is measured at a center frequency of 22.368 MHz (3 +/- 1 kHz) bandwidth.


Pulse shape: ITU-T G.703, Figure 14/ANSI T1.102-1988, Figure 8

Pulse amplitude: 0.36 to 0.85 V peak-to-peak

Loopback modes: Terminal and facility

Line build out: 0 to 69 m (0 to 225 ft); 69 to 137 m (226 to 450 ft)

DS3i-N-12 electrical interface

Connectors: 1.0/2.3 miniature coax connectors through the FMEC-E3/DS3 card

Environmental

Overvoltage protection: As in ITU-T G.703 Annex B

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 26.80 W, 0.56 A at -48 V, 91.5 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.8 kg (1.9 lb)

A.5.4  STM1E-12 Card Specifications

The STM1E-12 card has the following specifications:

STM1E-12 input

Bit rate: 155.52 Mbps +/-5 ppm for STM-1
or 139.264 Mbps +/-15 ppm for E-4

Line code: Coded mark inversion (CMI)

E-4 (can be framed or unframed)

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss: Up to 12.7 dB at 78 MHz (for cable length, see the specification of the cable that you are using)

AIS: ITU-T G.704 compliant

STM1E-12 output

Bit rate: 155.52 Mbps +/-5 ppm for STM-1
or 139.264 Mbps +/-15 ppm for E-4

Line code: CMI

E-4 can be framed or unframed

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

AIS: ITU-T G.704 compliant

Pulse shape: ITU-T G.703, Figure 18 and 19 for E-4, Figure 22 and 23 for STM-1

Pulse amplitude: 1 V +/- 0.1 V peak-to-peak

Loopback modes: Terminal and facility

STM1E-12 electrical interface

Connectors: 1.0/2.3 miniature coax connectors in the FMEC STM1E 1:1 card

Environmental

Overvoltage protection: As in ITU-T G.703 Annex B

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 59.40 W, 1.24 A at -48 V, 202.8 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.7 kg (1.7 lb)

A.5.5  FILLER Card

The FILLER card has the following specifications:

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: Not applicable

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Weight (not including clam shell): 0.2 kg (0.4 lb)

A.5.6  FMEC E1-120NP Specifications

The FMEC E1-120NP has the following specifications:

FMEC E1-120NP input

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Cable loss: Up to 6 dB at 1024 kHz

FMEC E1-120NP output

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Pulse shape: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

Pulse amplitude: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

FMEC E1-120NP electrical interface

Connectors: Molex 96-pin LFH connectors (21 ports per connector)

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.00 W, 0.00 A at -48 V, 0.0 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.3 kg (0.7 lb)

A.5.7  FMEC E1-120PROA Specifications

The FMEC E1-120PROA has the following specifications:

FMEC E1-120PROA input

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Cable loss: Up to 6 dB at 1024 kHz

FMEC E1-120PROA output

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Pulse shape: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

Pulse amplitude: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

FMEC E1-120PROA electrical interface

Connectors: Molex 96-pin LFH connectors (21 ports per connector)

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.1 W (provided by the E1-42 card), 0.34 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.3 kg (0.7 lb)

A.5.8  FMEC E1-120PROB Specifications

The FMEC E1-120PROB has the following specifications:

FMEC E1-120PROB input

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Cable loss: Up to 6 dB at 1024 kHz

FMEC E1-120PROB output

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

Termination: Balanced twisted-pair cable

Input impedance: 120 ohms +/-5 percent

Pulse shape: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

Pulse amplitude: conforms to ITU-T Recommendation G.703 (1991), Section 6.2, Figure 15 and Table 7

FMEC E1-120PROB electrical interface

Connectors: Molex 96-pin LFH connectors (21 ports per connector)

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.1 W (provided by the E1-42 card), 0.34 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.3 kg (0.7 lb)

A.5.9  E1-75/120 Impedance Conversion Panel Specifications

The FMEC E1-75/120 impedance conversion panel has the following specifications:

E1-75/120 input

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

E1-75/120 output

Bit rate: 2.048 Mbps +/-50 ppm

Line code: HDB-3

E1-75/120 electrical interface

Connectors:

1.0/2.3 miniature coax connectors on 75-ohm side

Molex 96-pin LFH connectors on 120-ohm side

Impedance tolerance: +/-5 percent

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: Not applicable; the E1-75/120 is a passive device.

Dimensions

Height: 75 mm (2.95 in.)

Width: 535 mm (21.06 in.)

Depth: 221 mm (8.7 in.)

Weight (not including clam shell): 2.15 kg (4.74 lb)

A.5.10  FMEC-E3/DS3 Specifications

The FMEC-E3/DS3 has the following specifications:

FMEC-E3/DS3 input (for E3 signals)

Bit rate: 34.368 Mbps +/-20 ppm

Line code: HDB-3

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss: Up to 12 dB at 17184 kHz

FMEC-E3/DS3 output (for E3 signals)

Bit rate: 34.368 Mbps +/-20 ppm

Line code: HDB-3

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

Pulse shape: ITU-T G.703, Figure 17

Pulse amplitude: ITU-T G.703, Figure 17 and Table 9

FMEC-E3/DS3 Input (for DS3 signals)

Bit rate: 44.736 Mbps +/- 20 ppm

Line code: B3ZS

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss:

Maximum 137 m (450 ft): 734A, RG59, 728A

Max 24 m (79 ft): RG179

FMEC-E3/DS3 output (for DS3 signals)

Bit rate: 44.736 Mbps +/-20 ppm

Line code: B3ZS

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

AIS: TR-TSY-000191 compliant

Power level: ITU-T G.703, Table 6; -1.8 to +5.7 dBm

Pulse shape: ITU-T G.703, Table 6 and Figure 14; ANSI T1.102-1988, Figure 8

Pulse amplitude: ITU-T G.703, Table 6; 0.36 to 0.85 V peak-to-peak

Line build out: 0 to 68.58 m (0 to 225 ft.); 68.88 to 137.16 m (226 to 450 ft.)

FMEC-E3/DS3 electrical interface

Connectors: 1.0/2.3 miniature coax connectors

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.00 W, 0.00 A at -48 V, 0.0 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.3 kg (0.7 lb)

A.5.11  FMEC STM1E 1:1 Specifications

The FMEC STM1E 1:1 has the following specifications:

FMEC STM1E 1:1 input

Bit rate: 155.52 Mbps +/-20 ppm

Line code: CMI

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss: Up to 12.7 dB at 78 MHz

FMEC STM1E 1:1 E4 input

Bit rate: 139.264 Mbps +/-15 ppm

Line code: CMI

Termination: Unbalanced coaxial cable

Input impedance: 75 ohms +/-5 percent

Cable loss: Up to 12.7 dB at 78 MHz

FMEC STM1E 1:1 output

Bit rate: 155.52 Mbps +/-20 ppm

Line code: CMI

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

Pulse shape: ITU-T G.703, Figure 18 and 19 for E-4, Figure 22 and 23 for STM-1

Pulse amplitude: 1 V +/- 0.1 V peak-to-peak

FMEC STM1E E4 output

Bit rate: 139.264 Mbps +/-20 ppm

Line code: CMI

Termination: Unbalanced coaxial cable

Output impedance: 75 ohms +/-5 percent

Pulse shape: ITU-T G.703, Figure 18 and 19 for E-4, Figure 22 and 23 for STM-1

Pulse amplitude: 1 V +/- 0.1 V peak-to-peak

FMEC STM1E 1:1 electrical interface

Connectors: 1.0/2.3 miniature coax connectors

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 8.8 W (provided by the STM1E-12 card), 30.0 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.3 kg (0.7 lb)

A.5.12  BLANK-FMEC Specifications

The BLANK-FMEC is a sheet metal plate that is used to cover up empty FMEC slots. It has the following specifications:

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: Not applicable

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Weight (not including clam shell): 0.2 kg (0.4 lb)

A.5.13  MIC-A/P Specifications

The MIC-A/P FMEC has the following specifications:

Power supply input BATTERY B

System supply voltage:

Nominal -48 VDC

Tolerance limits: -40.5 to -57.0 VDC

Connector: 3WK3 Combo-D power cable connector

Alarm outputs

Voltage (open contact): Maximum 60 VDC

Current (closed contact): Maximum 250 mA

Connector: 62-pin DB connector (common for inputs/outputs)

Alarm inputs

Voltage (open contact): Maximum 60 VDC

Current (closed contact): Maximum 2 mA

Connector: 62-pin DB connector (common for inputs/outputs)

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.13 W (provided by +5 V from the TCC2/TCC2P card), 0.44 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.2 kg (0.5 lb)

A.5.14  MIC-C/T/P Specifications

The MIC-C/T/P FMEC has the following specifications:

Power supply input BATTERY A

System supply voltage:

Nominal -48 VDC

Tolerance limits: -40.5 to -57.0 VDC

Connector: 3WK3 Combo-D power cable connector

Timing connector

Frequency: 2.048 MHz +/-10 ppm

Signal level: 0.75 to 1.5 V

Impedance: 75 ohms +/-5 percent (switchable by jumper to high impedance > 3 kohms)


Note 120 ohms balanced impedance is possible with external matching cable.


Cable attenuation: Up to 6 dB at 2 MHz

Connectors: 1.0/2.3 miniature coax connector

System management serial port:

System management serial port craft interface

Modem port (for future use)

Connectors: 8-pin RJ-45

System management LAN port connectors:

Signal: IEEE 802.3 10BaseT

Connectors: 8-pin RJ-45

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 0.38 W (provided by +5 V from the TCC2/TCC2P card), 1.37 BTU/hr

Dimensions

Height: 182 mm (7.165 in.)

Width: 32 mm (1.25 in.)

Depth: 92 mm (3.62 in.)

Depth with backplane connector: 98 mm (3.87 in.)

Weight (not including clam shell): 0.2 kg (0.5 lb)

A.6  Optical Card Specifications

This section provides specifications for the optical cards.

For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information document.

A.6.1  OC3 IR 4/STM1 SH 1310 Card Specifications

The OC3 IR 4/STM1 SH 1310 card has the following specifications:

Line

Bit rate: 155.52 Mbps

Code: Scrambled non-return to zero (NRZ)

Fiber: 1310-nm single-mode

Loopback modes: Terminal and facility

Connector: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: -8 dBm

Minimum transmitter output power: -15 dBm

Center wavelength: 1261 to 1360 nm

Nominal wavelength: 1310 nm

Transmitter: Fabry Perot laser

Extinction ratio: 8.2 dB

Dispersion ratio: 96 ps/nm

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 12

Receiver: InGaAs/InP photodetector

Link loss budget: 13 dB

Receiver input wavelength range: 1261 to 1360 nm

Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 19.20 W, 0.40 A at -48 V, 65.56 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.4 kg (1.0 lb)

A.6.2  OC3 IR/STM1 SH 1310-8 Card Specifications

The OC3IR/STM1 SH 1310-8 card has the following specifications:

Line

Bit rate: 155.52 Mbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Loopback modes: Terminal and facility

Connector: LC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: -8 dBm

Minimum transmitter output power: -15 dBm

Center wavelength: 1293 to 1334 nm

Nominal wavelength: 1310 nm

Transmitter: Fabry Perot laser

Extinction ratio: 8.2 dB

Dispersion tolerance: 96 ps/nm

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 12

Receiver: InGaAs/InP photodetector

Link loss budget: 13 dB

Receiver input wavelength range: 1274 to 1356 nm

Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 23.00 W, 0.48 A at -48 V, 78.5 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.4 kg (1.0 lb)

A.6.3  OC12 IR/STM4 SH 1310 Card Specifications

The OC12 IR/STM4 SH 1310 card has the following specifications:

Line

Bit rate: 622.08 Mbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: -8 dBm

Minimum transmitter output power: -15 dBm

Center wavelength: 1274 to 1356 nm

Nominal wavelength: 1310 nm

Transmitter: Fabry Perot laser

Extinction ratio: 8.2 dB

Dispersion tolerance: 96 ps/nm

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 12

Receiver: InGaAs/InP photodetector

Link loss budget: 13 dB

Receiver input wavelength range: 1274 to 1356 nm

Jitter tolerance: Telcordia GR-253/ITU-T G.823 compliant

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 10.90 W, 0.23 A at -48 V, 37.2 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.6 kg (1.4 lb)

A.6.4  OC12 LR/STM4 LH 1310 Card Specifications

The OC12 LR/STM4 LH 1310 card has the following specifications:

Line

Bit rate: 622.08 Mbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +2 dBm

Minimum transmitter output power: -3 dBm

Center wavelength: 1280 to 1335 nm

Nominal wavelength: 1310 nm

Transmitter: Distributed feedback (DFB) laser

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 12

Receiver: InGaAs/InP photodetector

Link loss budget: 25 dB

Receiver input wavelength range: 1280 to 1335 nm

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 9.28 W, 0.19 A at -48 V, 31.7 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.6 kg (1.4 lb)

A.6.5  OC12 LR/STM4 LH 1550 Card Specifications

The OC12 LR/STM4 LH 1550 card has the following specifications:

Line

Bit rate: 622.08 Mbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +2 dBm

Minimum transmitter output power: -3 dBm

Center wavelength: 1480 to 1580 nm

Nominal wavelength: 1550 nm

Transmitter: DFB laser

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 12

Receiver: InGaAs/InP photodetector

Link loss budget: 25 dB

Receiver input wavelength range: 1480 to 1580 nm

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 9.28 W, 0.19 A at -48 V, 31.7 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.6 kg (1.4 lb)

A.6.6  OC12 IR/STM4 SH 1310-4 Card Specifications

The OC12 IR/STM4 SH 1310-4 card has the following specifications:

Line

Bit rate: 622.08 Mbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Chromatic dispersion allowance: 74 ps/nm for the spectral range of 1274 to1356 nm;
46 ps/nm for the spectral range of 1293 to1334 nm

Loopback modes: Terminal and facility

Connector: SC

Transmitter

Maximum transmitter output power: -8 dBm

Minimum transmitter output power: -15 dBm

Center wavelength: 1293 to 1334 nm

Nominal wavelength: 1310 nm

Transmitter: Fabry Perot laser

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 10

Minimum receiver level: -30 dBm at BER 1 * 10 exp - 10

Receiver: InGaAs/InP photodetector

Link loss budget: 15 dB

Receiver input wavelength range: 1274 to 1356 nm

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 28 W, 0.58 A at -48 V, 95.6 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.4 kg (1.0 lb)

A.6.7  OC48 IR/STM16 SH AS 1310 Card Specifications

The OC48 IR/STM16 SH AS 1310 card has the following specifications:

Line

Bit rate: 2488.320 Mbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: 0 dBm

Minimum transmitter output power: -5 dBm

Center wavelength: 1280 to 1350 nm

Nominal wavelength: 1310 nm

Transmitter: DFB laser

Receiver

Maximum receiver level: 0 dBm at BER 1 * 10 exp - 10

Minimum receiver level: -18 dBm at BER 1 * 10 exp - 10

Receiver: InGaAs InP photodetector

Link loss budget: 13 dB minimum

Receiver input wavelength range: 1280 to 1350 nm

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 37.20 W, 0.78 A at -48 V, 127.0 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.9 kg (2.2 lb)

A.6.8  OC48 LR/STM16 LH AS 1550 Card Specifications

The OC48 LR/STM16 LH AS 1550 card has the following specifications:

Line

Bit rate: 2488.320 Mbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +3 dBm

Minimum transmitter output power: -2 dBm

Center wavelength: 1520 to 1580 nm

Nominal wavelength: 1550 nm

Transmitter: DFB laser

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 10

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 10

Receiver: InGaAs avalanche photo diode (APD) photodetector

Link loss budget: 26 dB minimum, with 1 dB dispersion penalty

Receiver input wavelength range: 1520 to 1580 nm

Environmental

Eye safety compliance: Class 1 (EN60825)

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 37.20 W, 0.78 A at -48 V, 127.0 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 0.9 kg (2.2 lb)

A.6.9  OC48 ELR/STM16 EH 100 GHz Card Specifications

The OC48 ELR/STM16 EH 100 GHz cards have the following specifications:

Line

Bit rate: 2488.320 Mbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.692, ITU-T G.707, ITU-T G.957, ITU-T G.958

Transmitter

Maximum transmitter output power: 0 dBm

Minimum transmitter output power: -2 dBm

Center wavelength: +/- 0.25 nm

Transmitter: DFB laser

Receiver

Maximum receiver level: -8 dBm at BER 1 * 10 exp - 10

Minimum receiver level: -28 dBm at BER 1 * 10 exp - 10

Receiver: InGaAs APD photodetector

Link loss budget: 26 dB minimum, with 1 dB dispersion penalty

Receiver input wavelength range: 1520 to 1580 nm

Environmental

Operating temperature: -5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 31.20 W, 0.65 A at -48 V, 106.5 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 1.1 kg (2.4 lb)

Currently available wavelengths and versions of the OC48 ELR/STM16 EH 100 GHz card:

ITU grid blue band (2 * 100 GHz spacing):

1530.33 +/- 0.25 nm, STM-16HS-LH 1530.33 (DWDM)

1531.90 +/- 0.25 nm, STM-16HS-LH 1531.90 (DWDM)

1533.47 +/- 0.25 nm, STM-16HS-LH 1533.47 (DWDM)

1535.04 +/- 0.25 nm, STM-16HS-LH 1535.04 (DWDM)

1536.61 +/- 0.25 nm, STM-16HS-LH 1536.61 (DWDM)

1538.19 +/- 0.25 nm, STM-16HS-LH 1538.19 (DWDM)

1539.77 +/- 0.25 nm, STM-16HS-LH 1539.77 (DWDM)

1541.35 +/- 0.25 nm, STM-16HS-LH 1541.35 (DWDM)

1542.94 +/- 0.25 nm, STM-16HS-LH 1542.94 (DWDM)

ITU grid red band (2 * 100 GHz spacing):

1547.72 +/- 0.25 nm, STM-16HS-LH 1547.72 (DWDM)

1549.32 +/- 0.25 nm, STM-16HS-LH 1549.32 (DWDM)

1550.92 +/- 0.25 nm, STM-16HS-LH 1550.92 (DWDM)

1552.52 +/- 0.25 nm, STM-16HS-LH 1552.52 (DWDM)

1554.13 +/- 0.25 nm, STM-16HS-LH 1554.13 (DWDM)

1555.75 +/- 0.25 nm, STM-16HS-LH 1555.75 (DWDM)

1557.36 +/- 0.25 nm, STM-16HS-LH 1557.36 (DWDM)

1558.98 +/- 0.25 nm, STM-16HS-LH 1558.98 (DWDM)

1560.61 +/- 0.25 nm, STM-16HS-LH 1560.61 (DWDM)

A.6.10  OC192 SR/STM64 IO 1310 Card Specifications

The OC192 SR/STM64 IO 1310 card has the following specifications:

Line

Bit rate: 9.95328 Gbps

Code: Scrambled NRZ

Fiber: 1310-nm single-mode

Maximum chromatic dispersion allowance: 6.6 ps/nm

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957, ITU-T G.691

Transmitter

Maximum transmitter output power: -1 dBm

Minimum transmitter output power: -6 dBm

Center wavelength: 1290 to 1330 nm

Nominal wavelength: 1310 nm

Transmitter: Directly modulated laser

Receiver

Maximum receiver level: -1 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -11 dBm at BER 1 * 10 exp - 12

Receiver: PIN diode

Link loss budget: 5 dB minimum, plus 1 dB dispersion penalty
at BER = 1 * 10 exp - 12 including dispersion

Receiver input wavelength range: 1290 to 1330 nm

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 47.00 W, 0.98 A at -48 V, 160.5 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 1.3 kg (3.1 lb)

A.6.11  OC192 IR/STM64 SH 1550 Card Specifications

The OC192 IR/STM64 SH 1550 card has the following specifications:

Line

Bit rate: 9.95328 Gbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Maximum chromatic dispersion allowance: 800 ps/nm

Loopback modes: Terminal and facility


Note You must use a 3 to 15 dB fiber attenuator (5 dB recommended) when working with the OC192 IR/STM64 SH 1550 card in a loopback. Do not use fiber loopbacks with the OC192 IR/STM64 SH 1550 card. Using fiber loopbacks can cause irreparable damage to the OC192 IR/STM64  SH 1550 card.


Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +2 dBm

Minimum transmitter output power: -1 dBm

Center wavelength: 1530 to 1565 nm

Nominal wavelength: 1550 nm

Transmitter: Cooled European accreditation (EA) modulated laser

Receiver

Maximum receiver level: -1 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -14 dBm at BER 1 * 10 exp - 12

Receiver: Positive-intrinsic-negative (PIN) diode

Link loss budget: 13 dB minimum, plus 2 dB dispersion penalty
at BER = 1 * 10 exp - 12 including dispersion

Receiver input wavelength range: 1530 to 1565 nm

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 50.00 W, 1.04 A at -48 V, 170.7 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 1.3 kg (3.1 lb)

A.6.12  OC192 LR/STM64 LH 1550 Card Specifications

The OC192 LR/STM64 LH 1550 card has the following specifications:

Line

Bit rate: 9.95328 Gbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Maximum chromatic dispersion allowance: 1360 ps/nm


Caution You must use a 20 dB fiber attenuator (19 to 24 dB) when working with the OC192 LR/STM64 LH 1550 card in a loopback. Do not use fiber loopbacks with these cards.

Loopback modes: Terminal and facility

Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +10 dBm

Minimum transmitter output power: +7 dBm

Center wavelength: 1545 to 1555 nm

Nominal wavelength: 1550 nm

Transmitter: Lithium Niobate (LN) external modulator transmitter

Receiver

Maximum receiver level: -9 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -21 dBm at BER 1 * 10 exp - 12

Receiver: APD/TIA

Link loss budget: 24 dB minimum, with no dispersion or 22 dB optical path loss at
BER = 1 * 10 exp - 12 including dispersion

Receiver input wavelength range: 1545 to 1555 nm

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 72.20 W, 1.50 A at -48 V, 246.5 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 1.3 kg (3.1 lb)

A.6.13  OC192 LR/STM64 LH ITU 15xx.xx Card Specifications

The OC192 LR/STM64 LH ITU 15xx.xx card has the following specifications:

Line

Bit rate: 9.95328 Gbps

Code: Scrambled NRZ

Fiber: 1550-nm single-mode

Maximum chromatic dispersion allowance:

In deployments with a dispersion compensating unit (DCU): +/- 1000 ps/nm, with optical signal-to-noise ratio (OSNR) of 19 dB (0.5 nm resolution bandwidth [RBW])

In deployments without a DCU: +/- 1200 ps/nm, with OSNR of 23 dB (0.5 nm RBW)

Loopback modes: Terminal and facility


Note You must use a 20-dB fiber attenuator (15 to 25 dB) when working with the OC192 LR/STM64 LH 15xx.xx card in a loopback. Do not use fiber loopbacks with the OC192 LR/STM64 LH 15xx.xx card. Using fiber loopbacks causes irreparable damage to this card.


Connectors: SC

Compliance: ITU-T G.707, ITU-T G.957

Transmitter

Maximum transmitter output power: +6 dBm

Minimum transmitter output power: +3 dBm

Center wavelength: See wavelength plan

Center wavelength accuracy: +/- 0.040 nm

Transmitter: LN external modulator transmitter

Receiver

Maximum receiver level: -9 dBm at BER 1 * 10 exp - 12

Minimum receiver level: -22 dBm at BER 1 * 10 exp - 12

Receiver: APD

Link loss budget: 25 dB minimum, plus 2 dB dispersion penalty
at BER = 1 * 10 exp - 12 including dispersion

Receiver input wavelength range: 1529 to 1565 nm

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 52.00 W, 1.08 A at -48 V, 177.6 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 1.3 kg (3.1 lb)

Currently available wavelengths and versions of OC192 LR/STM64 LH ITU 15xx.xx card:

ITU grid blue band:

1534.25 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1534.25

1535.04 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1535.04

1535.82 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1535.82

1536.61 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1536.61

1538.19 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1538.19

1538.98 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1538.98

1539.77 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1539.77

1540.56 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1540.56

ITU grid red band:

1550.12 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1550.12

1550.92 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1550.92

1551.72 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1551.72

1552.52 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1552.52

1554.13 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1554.13

1554.94 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1554.94

1555.75 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1555.75

1556.55 +/- 0.040 nm, OC192 LR/STM64 LH ITU 1556.55

A.6.14  15454_MRC-12 Card Specifications

The 15454_MRC-12 card has the following specifications:

Line

Bit rate: up to STM-16 (2488.320 Mbps), depending on SFP


Note Each optical interface on the card can be configured as STM-1, STM-4, or STM-16, depending on the available backplane bandwidth and existing provisioned lines. In general, the card supports all different rates on the line side as long as the accumulated bandwidth does not exceed the total backplane allowed bandwidth.


Fiber: 1550-nm single-mode

Connectors: LC duplex connector for each SFP

Compliance: ITU-T G.957 and Telcordia GR-253

Transmitter

Maximum transmitter output power: Depends on SFP (see SFP and XFP Specifications)

Minimum transmitter output power: Depends on SFP (see SFP and XFP Specifications)

Center wavelength: See wavelength plan

Center wavelength accuracy: 1 nm to 4 nm, depending on SFP

Transmitter: Fabry Perot and DFB laser

Receiver

Maximum receiver level: Depends on SFP (see SFP and XFP Specifications)

Minimum receiver level: Depends on SFP (see SFP and XFP Specifications)

Receiver: PIN PD

Receiver input wavelength range: Depends on SFP

Environmental

Operating temperature: -40 to +55 degrees Celsius (-40 to +149 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 38.00 W, 0.79 A at -48 V, 129.66 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight (not including clam shell): 3.1 lb (1.3 kg)

Wavelength Plan: Currently available wavelengths and versions of the 15454_MRC-12 card:

For ONS-SC-2G-28.7 through ONS-SC-2G-60.0 SFPs: 1528.77 nm to 1560.61 nm
(32 distinct wavelengths at 100 GHz spacing)


Note ONS-SC-2G-28.7, ONS-SC-2G-33.4, ONS-SC-2G-41.3, ONS-SC-2G-49.3, and ONS-SC-2G-57.3 are supported from Release 8.5 and later.


For ONS-SE-622-1470 through ONS-SE-622-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)

For ONS_SE-155-1470 through ONS-SE-155-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)

A.6.15  MRC-2.5G-12 Card Specifications

The MRC-2.5G-12 card has the following specifications:

Line

Bit rate: up to STM-16 (2488.320 Mbps), depending on SFP


Note Each optical interface on the card can be configured as STM-1, STM-4, or STM-16, depending on the available backplane bandwidth and existing provisioned lines. In general, the card supports all different rates on the line side as long as the accumulated bandwidth does not exceed the total backplane allowed bandwidth.


Fiber: 1550-nm single-mode

Connectors: LC duplex connector for each SFP

Compliance: ITU-T G.957 and Telcordia GR-253

Transmitter

Maximum transmitter output power: Depends on SFP (see SFP and XFP Specifications)

Minimum transmitter output power: Depends on SFP (see SFP and XFP Specifications)

Center wavelength: See wavelength plan

Center wavelength accuracy: 1 nm to 4 nm, depending on SFP

Transmitter: Fabry Perot and DFB laser

Receiver

Maximum receiver level: Depends on SFP (see SFP and XFP Specifications)

Minimum receiver level: Depends on SFP (see SFP and XFP Specifications)

Receiver: PIN PD

Receiver input wavelength range: Depends on SFP

Environmental

Operating temperature: -40 to +55 degrees Celsius (-40 to +149 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 38.00 W, 0.79 A at -48 V, 129.66 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight (not including clam shell): 3.1 lb (1.3 kg)

Wavelength Plan: Currently available wavelengths and versions of the MRC-2.5G-12 card:

For ONS-SC-2G-28.7 through ONS-SC-2G-60.0 SFPs: 1528.77 nm to 1560.61 nm
(32 distinct wavelengths at 100 GHz spacing)


Note ONS-SC-2G-28.7, ONS-SC-2G-33.4, ONS-SC-2G-41.3, ONS-SC-2G-49.3, and ONS-SC-2G-57.3 are supported from Release 8.5 and later.


For ONS-SE-622-1470 through ONS-SE-622-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)

For ONS_SE-155-1470 through ONS-SE-155-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)

A.6.16  OC192SR1/STM64IO Short Reach Card Specifications

The OC192SR1/STM64IO Short Reach card has the following specifications:


Note The OC192SR1/STM64IP Short Reach card is designated as OC192-XFP in CTC.


Line

Bit rate: STM-64 (9.9520 Gbps)

Fiber: 1310-nm single-mode

Connectors: LC duplex connector for the XFP

Compliance: ITU G.957 and GR-253

Transmitter

Maximum transmitter output power: -1 dBm

Minimum transmitter output power: -6 dBm

Receiver

Maximum receiver level: -1 dBm

Minimum receiver level: -11 dBm

Receiver input wavelength range: 1260 to 1565 nm

Environmental

Operating temperature: 0 to +55 degrees Celsius (32 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 40.00 W, 0.83 A at -48 V, 136.49 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight (not including clam shell): 3.1 lb (1.3 kg)

A.6.17  OC192/STM64 Any Reach Card Specifications

The OC192/STM64 Any Reach card has the following specifications:


Note The OC192/STM64 Any Reach card is designated as OC192-XFP in CTC.


Line

Bit rate: STM-64 (9.9520 Gbps)

Fiber: 1310-nm single-mode for ONS-XC-10G-S1 XFP, 1550-nm single mode for ONS-XC-10G-I2 and ONS-XC-10G-L2 XFPs

Connectors: LC duplex connector for the XFPs

Compliance: ITU G.957 and GR-253

Transmitter

Maximum transmitter output power: Depends on SFP (see the "SFP and XFP Specifications" section)

Minimum transmitter output power: Depends on SFP (see the "SFP and XFP Specifications" section)

Receiver

Maximum receiver level: Depends on SFP (see the "SFP and XFP Specifications" section)

Minimum receiver level: Depends on SFP (see the "SFP and XFP Specifications" section)

Receiver input wavelength range: 1260 to 1565 nm

Environmental

Operating temperature: 0 to +55 degrees Celsius (32 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 40.00 W, 0.83 A at -48 V, 136.49 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight (not including clam shell): 3.1 lb (1.3 kg)

A.7  Ethernet Card Specifications

This section includes specifications for the Ethernet cards.

For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information document.

A.7.1  E100T-G Card Specifications

The E100T-G card has the following specifications:

Environmental

Operating temperature:

C-Temp (15454-E100T-G): 0 to +55 degrees Celsius (32 to 131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 65 W, 1.35 A, 221.93 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Weight (not including clam shell): 2.3 lb (1.0 kg)

Compliance

ONS 15454 SDH cards, when installed in a system, comply with these safety standards: UL 1950, CSA C22.2 No. 950, EN 60950, IEC 60950

A.7.2  E1000-2-G Card Specifications

The E1000-2-G card has the following specifications:

Environmental

Operating temperature:

C-Temp (15454-E1000-2-G): 0 to +55 degrees Celsius (32 to 131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 53.50 W, 1.11 A, 182.67 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Weight (not including clam shell): 2.1 lb (0.9 kg)

Compliance

ONS 15454 SDH cards, when installed in a system, comply with these safety standards: UL 1950, CSA C22.2 No. 950, EN 60950, IEC 60950

Eye Safety Compliance: Class I (21 CFR 1040.10 and 1040.11) and Class 1M (IEC 60825-1 2001-01) laser products

A.7.3  CE-1000-4 Card Specifications

The CE-1000-4 card has the following specifications:

Environmental

Operating temperature: +23 to +131 degrees Fahrenheit (-5 to +55 degrees Celsius)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 60 W, 1.25 A at -48 V, 204.8 BTU/hr

Dimensions

Height: 12.650 in. (321.310 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Card weight: 2.1 lb (0.9 kg)

A.7.4  CE-100T-8 Card Specifications

The CE-100T-8 card has the following specifications:

Environmental

Operating temperature:

C-Temp (15454-CE100T): 0 to +55 degrees Celsius (32 to 131 degrees Fahrenheit)

Operating humidity: 0 to 95 percent, noncondensing

Power consumption: 53 W, 1.1 A, 181.3 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.913 in. (23.19 mm)

Depth: 9.073 in. (230.45 mm)

Weight (not including clam shell): 1.8 lb (0.82 kg)

A.7.5  CE-MR-10 Card Specifications

The CE-MR-10 card has the following specifications:

Environmental

Operating temperature

C-Temp (15454-CE-MR-10): 32 to 131 degrees Fahrenheit (0 to +50 degrees Celsius)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 95 W, 1.35 A at -48 V, 221.93 BTU/hr

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight not including clam shell: 2.3 lb (1.0 kg)

A.7.6  G1K-4 Card Specifications

The G1K-4 card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 63.00 W, 1.31 A at -48 V, 215.1 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 2.1 lb (0.9 kg)

Compliance. ONS 15454 SDH optical cards, when installed in a system, comply with these standards:

Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260, IEC 60825-1, IEC 60825-2, 21 CFR 1040-10, and 21 CFR 1040.11

Class 1 laser product

A.7.7  ML100T-12 Card Specifications

The ML100T-12 card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 53.00 W, 1.10 A at -48 V, 181.0 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 2.3 lb (1.0 kg)

Compliance. ONS 15454 SDH cards, when installed in a system, comply with these standards:

Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, and AS/NZS 3260

A.7.8  ML1000-2 Card Specifications

The ML1000-2 card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 49.00 W, 1.02 A at -48 V, 167.3 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 2.1 lb (0.9 kg)

Compliance: ONS 15454 SDH optical cards, when installed in a system, comply with these standards:

Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260, IEC 60825-1, IEC 60825-2, 21 CFR 1040-10, and 21 CFR 1040.11

Class 1 laser product

A.7.9  ML100X-8 Card Specifications

The ML100X-8 card has the following specifications:

Environmental

Operating temperature: -5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 65.00 W, 1.35 A at -48 V, 221.93 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Depth with backplane connector: 235 mm (9.250 in.)

Weight (not including clam shell): 2.1 lb (0.9 kg)

A.7.10  ML-MR-10 Card Specifications

The ML-MR-10 card has the following specifications:

Environmental

Operating temperature: +23 to +131 degrees Fahrenheit (-5 to +55 degrees Celsius)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 100.00 W

Dimensions

Height: 12.650 in. (321.3 mm)

Width: 0.716 in. (18.2 mm)

Depth: 9.000 in. (228.6 mm)

Depth with backplane connector: 9.250 in. (235 mm)

Weight not including clam shell: 0.9 kg (2.1 lb)

A.8  Storage Access Networking Card Specifications

This section provides specifications for the FC_MR-4 (Fibre Channel) card.

For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance Information document.

A.8.1  FC_MR-4 Card Specifications

Environmental

Operating temperature

C-Temp (15454-E100T): -5 to +55 degrees Celsius (23 to 131 degrees Fahrenheit)

Operating humidity: 5 to 95 percent, noncondensing

Power consumption: 60 W, 1.35 A, 221.93 BTU/hr

Dimensions

Height: 321.3 mm (12.650 in.)

Width: 18.2 mm (0.716 in.)

Depth: 228.6 mm (9.000 in.)

Weight (not including clam shell): 1.17 kg (2.59 lb)