Cisco ONS SDH TL1 Command Guide, Release 8.0
Chapter 6, CLR Commands
Downloads: This chapterpdf (PDF - 135.0KB) The complete bookPDF (PDF - 14.07MB) | Feedback

CLR Commands

Table Of Contents

CLR Commands

6.1  CLR-COND-SECU


CLR Commands


This chapter provides CLR (clear) commands for the Cisco ONS 15454 SDH and
Cisco ONS 15600 SDH.

6.1  CLR-COND-SECU

(Cisco ONS 15454 SDH and ONS 15600 SDH) The Clear Security Condition (CLR-COND-SECU) command clears the specified standing condition.

Usage Guidelines

In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.

Category

Security

Security

Superuser

Input Format

CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];

Input Example

CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:

Input Parameters

<SECUALMTYPE>

(Optional) Secure alarm type. Defaults to INTRUSION-PSWD. The parameter type is SECUALMTYPE, which is the security alarm type.

INTRUSION-PSWD

Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times.