Cisco ONS SONET TL1 Command Guide, Release 7.2
Chapter 20, RST Commands
Downloads: This chapterpdf (PDF - 145.0KB) The complete bookPDF (PDF - 12.38MB) | Feedback

RST Commands

Table Of Contents

RST Commands

20.1  RST-<MOD2>

20.2  RST-EQPT


RST Commands


This chapter provides restore (RST) commands for the Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, and ONS 15600.

20.1  RST-<MOD2>

(Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, ONS 15600) The Restore 10GFC, 10GIGE, 1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, D1VIDEO, DS1, DV6000, E1, E3, E4, EC1, ESCON, ETRCLO, FSTE, G1000, GFPOS, GIGE, HDTV, ISC1, OC12, OC192, OC3, OC48, OCH, OMS, OTS, POS, STS1, STS12C, STS18C, STS192C, STS24C, STS36C, STS3C, STS48C, STS6C, STS9C, T1, T3, VC12, VC3, VT1, or VT2 (RST-<MOD2>) command provisions a facility in service.

Usage Guidelines

See Table 27-1 for supported modifiers by platform.


Note This command can only be executed when the port is in the Out of Service and Maintenance (OOS,MT) state.


Category

Ports

Security

Maintenance

Input Format

RST-<MOD2>:[<TID>]:<AID>:<CTAG>::::[<PST>[,<SST>]];

Input Example

RST-EC1:CISCO:FAC-1-1:1::::IS,AINS;

Input Parameters

<AID>

Access identifier from the "ALL" section.

<PST>

Primary state. Defaults to IS. The parameter type is PST, which indicates the current overall service condition of an entity.

IS

In service

OOS

Out of service

<SST>

Secondary state. Defaults to AINS. The parameter type is SST, which provides additional information pertaining to PST and PSTQ.

AINS

Automatic In-Service

DSBLD

Disabled

LPBK

Loopback

MEA

Mismatch of Equipment

MT

Maintenance

OOG

Out of Group

SWDL

Software Download

UAS

Unassigned

UEQ

Unequipped


20.2  RST-EQPT

(Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, ONS 15600) The Restore Equipment (RST-EQPT) command provisions equipment into the In Service (IS) state from the Maintenance (MT) state.

Usage Guidelines

This command is only applicable to equipment that is in transition from the MT state to the IS state.

Category

Equipment

Security

Maintenance

Input Format

RST-EQPT:[<TID>]:<AID>:<CTAG>[::];

Input Example

RST-EQPT:CISCO:SLOT-1:1;

Input Parameters

<AID>

Access identifier from the "EQPT" section.