Cisco ONS SONET TL1 Command Guide, Release 7.0.1
Chapter 3, APPLY Commands
Downloads: This chapterpdf (PDF - 137.0 KB) The complete bookPDF (PDF - 11.6 MB) | Feedback

APPLY Commands

Table Of Contents

APPLY Commands

3.1  APPLY

APPLY Commands

This chapter provides apply (APPLY) commands for the Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, and ONS 15600.

3.1  APPLY

(Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, ONS 15600) The Apply (APPLY) command activates or reverts a software load during a software upgrade or downgrade process.

Usage Guidelines

An error will be generated if you attempt to activate an older software load or attempt to revert to a newer software load.


File Transfer



Input Format


Input Example


Input Parameters


(Optional) Memory switch action during the software upgrade. The parameter type is DL_TYPE, which indicates the software download type. The default value is ACT.


(ONS 15600) Activates to a newer software load on the active controller card and resets the active card.


(ONS 15600) Cancels the software download.


Reverts to an older software load during software download.


Activates to a new software load. (For ONS 15600, the new software load is activated on the standby controller card only).