Cisco Prime Network Registrar IPAM 8.1.3.2 Release Notes
How to Apply IPAM 8.1.3.2 Patch
Cisco Prime Network Registrar IPAM Bugs
Accessibility Features in Cisco Prime Network Registrar IPAM 8.1.3.2
Obtaining Documentation and Submitting a Service Request
Note: IPAM 8.1.3.2 patch can only be applied on an existing installation of IPAM 8.1.3 (7.0.45 build) or IPAM 8.1.3.1 (7.0.45 patch 15363). To apply the patch on IPAM 8.1.2, you MUST first upgrade it to IPAM 8.1.3. After you have upgraded to IPAM 8.1.3, you can apply the IPAM 8.1.3.2 patch. To learn about how to apply the patch on IPAM 8.1.3, refer to How to Apply IPAM 8.1.3.2 Patch.
These release notes provide an overview of the fixed and open defects in Cisco Prime Network Registrar IPAM 8.1.3.2, describe how to apply the patch, and how to access additional information about known problems in Cisco Prime Network Registrar IPAM 8.1.3.2.
Note: You can access the most current Cisco Prime Network Registrar IPAM documentation, including these release notes, online at:
http://www.cisco.com/en/US/products/ps11808/tsd_products_support_series_home.html.
This document contain the following sections:
■How to Apply IPAM 8.1.3.2 Patch
■Cisco Prime Network Registrar IPAM Bugs
■Accessibility Features in Cisco Prime Network Registrar IPAM 8.1.3.2
Cisco Prime Network Registrar IPAM is a comprehensive software solution that helps organizations plan and maintain their IP address space and leverages that information for use by IP services such as DNS and DHCP.
Cisco Prime Network Registrar IPAM is a next generation tool that offers advanced functionality:
■Centralized planning and management of the complete address space down to the individual IP address level
■Centralized DNS and DHCP configuration management.
■Automated address utilization collection and reporting.
■Address utilization forecasting and trending analysis.
■APIs and Command Line Interfaces for integration with any type of system. Examples are work-flow systems, provisioning systems, change management systems, or network management systems.
Unlike other tools that maintain IP name and address data as discrete information maintained uniquely and separately, Cisco Prime Network Registrar IPAM interacts with network devices and services to:
■Verify that the actual network matches the information in Cisco Prime Network Registrar IPAM.
■Capture and record utilization information to be able to establish historical trends.
This interaction not only maintains consistency between the planned and deployed network, but allows proactive modification to the network to adjust for IP address shortages and overages.
For information on installing Cisco Prime Network Registrar IPAM, refer to Cisco Prime Network Registrar IPAM 8.1.3 Installation Guide.
To start using the Cisco Prime Network Registrar IPAM Management System, all Cisco Prime Network Registrar IPAM services, and the Cisco Prime Network Registrar IPAM database must be started.
Cisco Prime Network Registrar IPAM is licensed separately from Cisco Prime Network Registrar DHCP, DNS, and Caching DNS. When installing IPAM, you will be asked to install as a separate process using a separate license key. To receive the IPAM license, you must purchase Cisco Prime Network Registrar IPAM, either individually, or as part of a Cisco Prime Network Registrar suite.
Note: The IPAM 8.1.3.2 patch may make adjustments to the /opt/incontrol/etc/tomcat file on the Executive server. Some customers have customized this file, mostly adjusting the Xmx setting - the maximum amount of RAM Tomcat can use. You should backup this file before applying the patch on your current system and compare the settings later. Generally, it is this line customers adjust: CATALINA_OPTS="-Xms128m -Xmx512m -XX:PermSize=128m-XX:MaxPermSize=256m"; export CATALINA_OPTS. The -Xmx512 is the max ram tomcat can use in a peak. If your Exec has allot of RAM, you might have adjusted this. Do not just put the pre-patch tomcat file back. Use vi to adjust.
The Cisco Prime Network Registrar IPAM 8.1.3.2 Upgrade/Patch Utility is designed to help users automatically upgrade or patch the systems and automatically backup existing data at the same time.
Patch upgrades are when the ‘incontrol.jar’, ‘incontrol.war’, ‘inc-ws.war’ files are replaced and the originals are backed up. In some cases, files that do not reside within the.war or.jar files are also applied and the originals are backed up. Or just.sql updates are applied against the database to assist with obtaining new features.
An “in-place” upgrade is when a new version of Cisco Prime Network Registrar IPAM is applied and the database schema is also upgraded to the new version. The original.war and.jar files, along with the database, are backed up.
Note: All original files will be backed up automatically to INCHOME/tmp/backup-<dateofupgrade>.
Note: Oracle users must manually backup their database before starting an upgrade. Contact your DBA for assistance.
Unix Instructions for Upgrade/Patching Tool:
Note: All commands should be run as incadmin.
1. Download the file cpnr_8_1_3_2-ipam-unix-patch.gtar.gz, copy it into /tmp directory of the IPAM Executive system, and extract the file.
2. Navigate to /tmp/cpnr_8_1_3_2-ipam-unix directory.
3. Run the following command:
. /opt/incontrol/etc/shrc (Notice the space after the dot.).
4. From /tmp/cpnr_8_1_3_2-ipam-unix, run the following command:
sh PNR813Upgrade-7.0.45-7.0.45-15881-unix-1.bin
For restoring your original files/db:
1. Run the following command:
. /opt/incontrol/etc/shrc
2. From /tmp/cpnr_8_1_3_2-ipam-unix, run the following command:
sh restore.sh INCHOME/tmp/<directory to restore>
Example: sh restore.sh /opt/incontrol/tmp/backup-<dateofupgrade>
Windows Instructions for Upgrade/Patching Tool:
1. Download the file cpnr_8_1_3_2-ipam-windows-patch.exe and copy it into C:\temp directory of the Executive server.
2. Extract the file into C:\temp directory.
3. Open a DOS prompt window and run the following command:
cd C:\temp\cpnr_8_1_3_2-ipam-windows-patch
4. Run the following command:
“c:\Program Files\Cisco\Cisco Prime Network Registrar IPAM\etc\shrc.bat”
For restoring your original files/db:
1. Open a DOS prompt window and run the following command:
cd C:\temp\cpnr_8_1_3_2-ipam-windows-patch
2. Run the following command:
“c:\Program Files\Cisco\Cisco Prime Network Registrar IPAM\etc\shrc.bat”
3. Run the following command:
restore.exe “INCHOME\tmp\<directory to restore>”
Example: restore.exe “c:\Program Files\Cisco\Cisco Prime Network Registrar IPAM\tmp\backup-<dateofupgrade>”
IPAM 8.1.3 is running on MySQL Community Server 5.6.17. If IPAM 8.1.3 is installed on Solaris 10 (Sparc), then MySQL is exposed to some security vulnerabilities, for which a MySQL upgrade or patch is recommended. Oracle has issued an alert about these vulnerabilities and further information can be found at Oracle Critical Patch Update Advisory - July 2015.
For more information on a specific bug or to search all bugs in a particular Cisco Prime Network Registrar IPAM release, see Using the Bug Search Tool.
This section contains the following information:
Resolved Bugs in Cisco Prime Network Registrar IPAM 8.1.3.2 lists the key issues resolved in the Cisco Prime Network Registrar IPAM 8.1.3.2 release.
Open Caveats in Cisco Prime Network Registrar IPAM 8.1.3.2 lists the open caveats in the Cisco Prime Network Registrar IPAM 8.1.3.2 release.
Use the Bug Search tool to search for a specific bug or to search for all bugs in a release.
1. Go to http://tools.cisco.com/bugsearch.
2. At the Log In screen, enter your registered Cisco.com username and password; then, click Log In. The Bug Search page opens.
Note: If you do not have a Cisco.com username and password, you can register for them at http://tools.cisco.com/RPF/register/register.do.
3. To search for a specific bug, enter the bug ID in the Search For field and press Return.
4. To search for bugs in the current release:
a. Click the Search Bugs tab and specify the following criteria:
b. In the Search For field, enter Prime Network Registrar IPAM 8.1.3 and press Return. (Leave the other fields empty.)
c. When the search results are displayed, use the filter tools to find the types of bugs you are looking for. You can search for bugs by status, severity, modified date, and so forth.
Note: To export the results to a spreadsheet, click the Export All to Spreadsheet link.
See Cisco Prime Network Registrar IPAM Documentation for a list of Cisco Prime Network Registrar IPAM 8.1.3.2 guides.
All product documents are accessible except for images, graphics, and some charts. If you would like to receive the product documentation in audio format, braille, or large print, contact accessibility@cisco.com.
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.