Cisco Prime Network Device Package Third-Party VNE Reference Guide, 3.8 and 3.9
Traps for Third-Party Network Elements in Cisco Prime Version 3.8
Downloads: This chapterpdf (PDF - 8.88MB) The complete bookPDF (PDF - 12.85MB) | Feedback

Traps

Table Of Contents

Traps

Alcatel-Lucent ASAM/ISAM V1 Traps

Alcatel-Lucent ASAM/ISAM V2 Traps

Alcatel-Lucent 7450 ESS V1 Traps

Alcatel-Lucent 7450 ESS V2 Traps

Alcatel-Lucent 7705 SAR V2 Traps

Alcatel-Lucent 7750 SR V1 Traps

Alcatel-Lucent 7750 SR V2 Traps

DragonWave Horizon Compact Series V2 Traps

DragonWave Horizon Compact Plus Series V2 Traps

DragonWave Horizon Quantum Series V2 Traps

Huawei S9300-Series V1 Traps

Huawei S9300-Series V2 Traps

Huawei CX600/ATN Series V1 Traps

Huawei CX600/ATN Series V2 Traps

Juniper E-Series V1 Traps

Juniper E-Series V2 Traps

Juniper M-Series V1 Traps

Juniper M-Series V2 Traps

Juniper MX-Series V1 Traps

Juniper MX-Series V2 Traps

Juniper Netscreen V1 Traps

Juniper Netscreen V2 Traps

Juniper T-Series V1 Traps

Juniper T-Series V2 Traps

Juniper JCS-Series V1 Traps

Juniper JCS-Series V2 Traps

RAD ACE V1 Traps

RAD ETX 204A V1 Traps

RAD IPmux-4L V1 Traps

RAD LA-210 V1 Traps

Tellabs V1 Traps

Tellabs V2 Traps

Fortigate V2 Traps

Occam V2 Traps

Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

Alcatel-Lucent 7750 SR V1 Traps Registry Parameters

Alcatel-Lucent 7750 SR V2 Traps Registry Parameters

DragonWave Horizon Compact Series V2 Traps Registry Parameters

DragonWave Horizon Compact Plus Series V2 Traps Registry Parameters

DragonWave Horizon Quantum Series V2 Traps Registry Parameters

Huawei S9300-Series V1 Traps Registry Parameters

Huawei S9300-Series V2 Traps Registry Parameters

Huawei CX600/ATN Series V1 Traps Registry Parameters

Huawei CX600/ATN Series V2 Traps Registry Parameters

Juniper E-Series V1 Traps Registry Parameters

Juniper E-Series V2 Traps Registry Parameters

Juniper M-Series V1 Traps Registry Parameters

Juniper M-Series V2 Traps Registry Parameters

Juniper MX-Series V1 Traps Registry Parameters

Juniper MX-Series V2 Traps Registry Parameters

Juniper Netscreen V1 Traps Registry Parameters

Juniper Netscreen V2 Traps Registry Parameters

Juniper T-Series V1 Traps Registry Parameters

Juniper T-Series V2 Traps Registry Parameters

Juniper JCS-Series V1 Traps Registry Parameters

Juniper JCS-Series V2 Traps Registry Parameters

RAD ACE V1 Traps Registry Parameters

RAD ETX 204A V1 Traps Registry Parameters

RAD IPmux-4L V1 Traps Registry Parameters

RAD LA-210 V1 Traps Registry Parameters

Tellabs V1 Traps Registry Parameters

Tellabs V2 Traps Registry Parameters

Fortigate V2 Traps Registry Parameters

Occam V2 Traps Registry Parameters


Traps


This section describes the traps for third-party devices in Prime Network. Traps appear in the Prime Network Event V1 Trap and V2 Trap tabs. (For information about Prime Network Events, see the Cisco Prime Network 3.9 Reference Guide.) Trap information is presented in two forms:

Trap Tables—A section devoted to the supported traps for both versions V1 (for example, Alcatel-Lucent 7450 ESS V1 Traps). Each of these sections contains a table listing the name of each third-party device-supported trap in that MIB, along with its OID, varbinds, and a short description. The trap's Short Description is what you see in a ticket's Trap tabs in Prime Network Event 3.9. In the trap tables in this Reference Guide, each trap's Short Description is also a link to the trap's corresponding parameters.

Registry Parameter Tables—A section devoted to the event types, event subtypes and Prime Network registry parameters for the traps supported in each MIB. There is one parameter table for every trap table (for example, Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters). Each trap event can have multiple event subtypes, or states. The parameter tables indicate when each trap state is generated, and how Prime Network processes them (such as their severity, and whether they are ticketable, can be correlated, are autocleared, and so on).

Prime Network 3.9 users can enable an additional IP address in the device for traps and syslogs. This new feature is called Multisource Events. When Prime Network 3.9 receives a trap or syslog from that device (from the new IP) it will still recognize the device. For more details on multisource events see Prime Network 3.9 Release Notes.

This chapter includes the following topics:

Alcatel-Lucent ASAM/ISAM V1 Traps

Alcatel-Lucent ASAM/ISAM V2 Traps

Alcatel-Lucent 7450 ESS V1 Traps

Alcatel-Lucent 7450 ESS V2 Traps

Alcatel-Lucent 7705 SAR V2 Traps

Alcatel-Lucent 7750 SR V1 Traps

Alcatel-Lucent 7750 SR V2 Traps

DragonWave Horizon Compact Series V2 Traps

DragonWave Horizon Compact Plus Series V2 Traps

DragonWave Horizon Quantum Series V2 Traps

Huawei S9300-Series V1 Traps

Huawei S9300-Series V2 Traps

Huawei CX600/ATN Series V1 Traps

Huawei CX600/ATN Series V2 Traps

Juniper E-Series V1 Traps

Juniper E-Series V2 Traps

Juniper M-Series V1 Traps

Juniper M-Series V2 Traps

Juniper MX-Series V1 Traps

Juniper MX-Series V2 Traps

Juniper Netscreen V1 Traps

Juniper Netscreen V2 Traps

Juniper T-Series V1 Traps

Juniper T-Series V2 Traps

Juniper JCS-Series V1 Traps

Juniper JCS-Series V2 Traps

RAD ACE V1 Traps

RAD ETX 204A V1 Traps

RAD IPmux-4L V1 Traps

RAD LA-210 V1 Traps

Tellabs V1 Traps

Tellabs V2 Traps

Fortigate V2 Traps

Occam V2 Traps

Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

Alcatel-Lucent 7750 SR V1 Traps Registry Parameters

Alcatel-Lucent 7750 SR V2 Traps Registry Parameters

DragonWave Horizon Compact Series V2 Traps Registry Parameters

DragonWave Horizon Compact Plus Series V2 Traps Registry Parameters

DragonWave Horizon Quantum Series V2 Traps Registry Parameters

Huawei S9300-Series V1 Traps Registry Parameters

Huawei S9300-Series V2 Traps Registry Parameters

Huawei CX600/ATN Series V1 Traps Registry Parameters

Huawei CX600/ATN Series V2 Traps Registry Parameters

Juniper E-Series V1 Traps Registry Parameters

Juniper E-Series V2 Traps Registry Parameters

Juniper M-Series V1 Traps Registry Parameters

Juniper M-Series V2 Traps Registry Parameters

Juniper MX-Series V1 Traps Registry Parameters

Juniper MX-Series V2 Traps Registry Parameters

Juniper Netscreen V1 Traps Registry Parameters

Juniper Netscreen V2 Traps Registry Parameters

Juniper T-Series V1 Traps Registry Parameters

Juniper T-Series V2 Traps Registry Parameters

Juniper JCS-Series V1 Traps Registry Parameters

Juniper JCS-Series V2 Traps Registry Parameters

RAD ACE V1 Traps Registry Parameters

RAD ETX 204A V1 Traps Registry Parameters

RAD IPmux-4L V1 Traps Registry Parameters

RAD LA-210 V1 Traps Registry Parameters

Tellabs V1 Traps Registry Parameters

Tellabs V2 Traps Registry Parameters

Fortigate V2 Traps Registry Parameters

Occam V2 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V1 Traps

Table 11-1 lists the Alcatel-Lucent ASAM/ISAM V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-31.

Table 11-1 Alcatel-Lucent ASAM/ISAM V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

ospf-if-auth-failure

6

6

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

alcatel OSPF if auth failure trap

               

ospf-if-config-error

6

4

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

alcatel OSPF if config error trap

ospf-if-rx-bad-packet

6

8

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

alcatel OSPF if rx bad packet trap

ospf-if-state-change

6

16

1.3.6.1.2.1.14.16.2.16

   

ospf if state change trap

alcatel OSPF if state change trap

ospf-max-age-lsa

6

13

1.3.6.1.2.1.14.16.2.13

   

ospf max age lsa trap

alcatel OSPF max age lsa trap

ospf-nbr-state-change

6

2

1.3.6.1.2.1.14.16.2.2

   

ospf nbr state change trap

alcatel OSPF nbr state change trap

ospf-originate-lsa

6

12

1.3.6.1.2.1.14.16.2.12

   

ospf originate lsa trap

alcatel OSPF originate lsa trap

ent-config-change

6

1

1.3.6.1.2.1.47.2.0.1

   

ent config change trap

alcatel Ent config change


Alcatel-Lucent ASAM/ISAM V2 Traps

Table 11-2 lists the Alcatel-Lucent ASAM/ISAM V2 Traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-32.

Table 11-2 Alcatel-Lucent ASAM/ISAM V2Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

cold-start-v2

1.3.6.1.6.3.1.1.5.1

   

MIB2 V2 cold start trap

alcatel Cold start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

   

MIB2 V2 warm start trap

alcatel Warm start trap

link-down-v2

1.3.6.1.6.3.1.1.5.3

   

MIB2 V2 link down

alcatel Link down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

   

MIB2 V2 link up

alcatel Link up trap

ospf-if-auth-failure

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

alcatel OSPF if auth failure trap

ospf-if-config-error

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

alcatel OSPF if config error trap

ospf-if-rx-bad-packet

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

alcatel OSPF if rx bad packet trap

ospf-tx-retransmit

1.3.6.1.2.1.14.16.2.10

   

ospf tx retransmit trap

alcatel OSPF tx retransmit trap

ospf-tx-retransmit

1.3.6.1.2.1.14.16.2.10

   

ospf tx retransmit trap

alcatel OSPF tx retransmit trap

bgpEstablished

1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

alcatel BGP established trap

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

alcatel BGP down trap


Alcatel-Lucent 7450 ESS V1 Traps

Table 11-3 lists the Alcatel-Lucent V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-33.

Table 11-3 Alcatel-Lucent 7450 ESS V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

hdsl2shdsl-local-power-loss

6

16

1.3.6.1.2.1.10.48.0.16

   

hdsl2shdsl local power loss trap

alcatel Hdsl2shdsl local power loss trap

hdsl2shdsl-loop-atten-crossing

6

1

1.3.6.1.2.1.10.48.0.1

   

hdsl2shdsl loop attend crossing trap

alcatel Hdsl2shdsl loop atten crossing trap

hdsl2shdsl-loopback-failure

6

9

1.3.6.1.2.1.10.48.0.9

   

hdsl2shdsl loopback failure trap

alcatel Hdsl2shdsl loopback failure trap

hdsl2shdsl-no-neighbor-present

6

15

1.3.6.1.2.1.10.48.0.15

   

hdsl2shdsl no neighbor present trap

alcatel Hdsl2shdsl loopback failure trap

hdsl2shdsl-perf-crc-anomalies-thresh

6

5

1.3.6.1.2.1.10.48.0.5

   

hdsl2shdsl perf crc anomalies thresh trap

alcatel Hdsl2shdsl perf crc anomalies thresh trap

hdsl2shdsl-perf-es-thresh

6

3

1.3.6.1.2.1.10.48.0.3

   

hdsl2shdsl perf es thresh trap

alcatel Hdsl2shdsl perf es thresh trap

hdsl2shdsl-perf-los-ws-thresh

6

6

1.3.6.1.2.1.10.48.0.6

   

hdsl2shdsl perf los ws thresh trap

alcatel Hdsl2shdsl perf los ws thresh trap

hdsl2shdsl-perf-ses-thresh

6

4

1.3.6.1.2.1.10.48.0.4

   

hdsl2shdsl perf ses thresh trap

alcatel Hdsl2shdsl perf ses thresh trap

dlsw-trap-circuit-down

6

 

1.3.6.1.2.1.46.1.0

   

dlsw trap circuit down trap

alcatel DLSW circuit down trap

hdsl2shdsl-perf-uas-thresh

6

7

1.3.6.1.2.1.10.48.0.7

   

hdsl2shdsl perf uas thresh trap

alcatel Hdsl2shdsl perf uas thresh trap

hdsl2shdsl-power-back-off

6

10

1.3.6.1.2.1.10.48.0.10

   

hdsl2shdsl power back off trap

alcatel Hdsl2shdsl power back off trap

hdsl2shdsl-protocol-init-failure

6

14

1.3.6.1.2.1.10.48.0.14

   

hdsl2shdsl protocol init failure trap

alcatel Hdsl2shdsl protocol init failure trap

hdsl2shdsl-snr-margin-crossing

6

2

1.3.6.1.2.1.10.48.0.2

   

hdsl2shdsl snr margin crossing trap

alcatel Hdsl2shdsl snr margin crossing trap

hdsl2shdsl-span-invalid-num-repeaters

6

8

1.3.6.1.2.1.10.48.0.8

   

hdsl2shdsl span invalid num repeaters trap

alcatel Hdsl2shdsl span invalid num repeaters trap

new-root

6

1

1.3.6.1.2.1.17.0.1

   

new root trap

alcatel New Root trap

ospf-if-auth-failure

6

6

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

alcatel OSPF if auth failure trap

ospf-if-config-error

6

4

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

alcatel OSPF if config error trap

ospf-if-rx-bad-packet

6

8

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

alcatel OSPF if rx bad packet trap

ospf-if-state-change

6

16

1.3.6.1.2.1.14.16.2.16

   

ospf if state change trap

alcatel OSPF if state change trap

DLSW-trap-tconn-down

6

 

1.3.6.1.2.1.46.1.0

   

alcatel DLSW trap tconn down trap

alcatel DLSW tconn down trap

ospf-lsdb-approaching-overflow

6

16

1.3.6.1.2.1.14.16.2.15

   

ospf lsdb approaching overflow trap

alcatel OSPF lsdb approaching overflow trap

ospf-lsdb-overflow

6

14

1.3.6.1.2.1.14.16.2.14

   

ospf lsdb overflow trap

alcatel OSPF lsdb approaching overflow trap

authentication-failure

4

0

1.3.6.1.4.1

   

MIB2 V1 authentication-failure trap

alcatel Authentication failure trap

ospf-max-age-lsa

6

13

1.3.6.1.2.1.14.16.2.13

   

ospf max age lsa trap

alcatel OSPF max age lsa trap

ospf-nbr-state-change

6

2

1.3.6.1.2.1.14.16.2.2

   

ospf nbr state change trap

alcatel OSPF nbr state change trap

ospf-originate-lsa

6

12

1.3.6.1.2.1.14.16.2.12

   

ospf originate lsa trap

alcatel OSPF originate lsa trap

ospf-tx-retransmit

6

10

1.3.6.1.2.1.14.16.2.10

   

ospf tx retransmit trap

alcatel OSPF tx retransmit trap

ospf-virt-if-auth-failure

6

7

1.3.6.1.2.1.14.16.2.7

   

ospf virt if auth failure trap

alcatel OSPF virt if auth failure trap

ospf-virt-if-config-error

6

5

1.3.6.1.2.1.14.16.2.5

   

ospf virt if config error trap

alcatel OSPF virt if config error trap

dlsw-trap-tconn-partner-reject

6

1

1.3.6.1.2.1.46.1.0.1

   

dlsw trap tconn partner reject trap

alcatel DLSW tconn partner reject trap

ospf-virt-if-rx-bad-packet

6

9

1.3.6.1.2.1.14.16.2.9

   

ospf virt if rx bad packet trap

alcatel OSPF virt if rx bad packet trap

ospf-virt-if-state-change

6

1

1.3.6.1.2.1.14.16.2.1

   

ospf virt if state change trap

alcatel OSPF virt if state change trap

ospf-virt-if-tx-retransmit

6

11

1.3.6.1.2.1.14.16.2.11

   

ospf virt if tx retransmit trap

alcatel OSPF virt if tx retransmit trap

ospf-virt-nbr-state-change

6

3

1.3.6.1.2.1.14.16.2.3

   

ospf virt nbr state change trap

alcatel OSPF virt nbr state change trap

cold-start

0

0

1.3.6.1.6.3.1.1.5.1

   

MIB2 V1 cold start trap

alcatel Cold start trap

vrrp-trap-auth-failure

6

2

1.3.6.1.2.1.68.0.2

   

vrrp trap auth failure trap

alcatel Vrrp trap auth failure trap

vrrp-trap-new-master

6

1

1.3.6.1.2.1.68.0.1

   

vrrp trap new master trap

alcatel Vrrp trap new master trap

link-down

2

0

1.3.6.1.6.3.1.1.5.3

   

MIB2 V1 link down

alcatel Link down trap

link-up

3

0

1.3.6.1.6.3.1.1.5.4

   

MIB2 V1 link up

alcatel Link up trap

warm-start

1

0

1.3.6.1.6.3.1.1.5.2

   

MIB2 V1 warm start trap

alcatel Warm start trap

dlsw-trap-tconn-prot-violation

6

2

1.3.6.1.2.1.46.1.0.2

   

dlsw trap tconn prot violation trap

alcatel DLSW tconn prot violation trap

x25-reset

6

2

1.3.6.1.2.1.10.5.0.2

   

x25 reset trap

alcatel X25 reset trap

x25-restart

6

2

1.3.6.1.2.1.10.5.0.2

   

x25 restart trap

alcatel X25 restart trap

dummy-ticket

6

0

1.3.6.1.4.1.42

   

dummy ticket on sun servers.

alcatel Dummy ticket trap

tcp connection table

6

0

1.3.6.1.2.1.6.13.1

   

tcp connection table2 trap - DUMP

alcatel TCP connection table trap

ent-config-change

6

1

1.3.6.1.2.1.47.2.0.1

   

ent config change trap

alcatel Ent config change

fr-dlci-status-change

6

1

1.3.6.1.2.1.10.32.2.1

   

Frame-Relay dlci status change trap

alcatel FR DLCI status change trap

hdsl2shdsl-config-init-failure

6

13

1.3.6.1.2.1.10.48.0.13

   

hdsl2shdsl config init failure trap

alcatel Hdsl2shdsl config init failure trap

hdsl2shdsl-dc-continuity-fault

6

12

1.3.6.1.2.1.10.48.0.12

   

hdsl2shdsl dc continuity fault trap

alcatel Hdsl2shdsl dc continuity fault trap

rsEnvirPowerSupplyFailed

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.1

   

A power supply on the sending device has failed. The entPhysicalDescr object identifies the failed supply.

Riverstone environment power supply failed

rsEnvirPowerSupplyRecovered

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.2

   

A power supply on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered supply.

Riverstone environment power supply recovered trap

rsEnvirHotSwapIn

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.7

   

A module has been inserted into the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric bay

Riverstone environment swap in trap

rsEnvirHotSwapOut

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.8

   

A module has been turned off or removed from the chassis. The object entPhysicalDescr identifies the module. The module can be a card for the main bay or a switching fabric in the switching fabric.

Riverstone environment swap out trap

rsEnvirFanFailed

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.3

   

A Fan tray on the sending device has failed. The entPhysicalDescr object identifies the failed fan tray

Riverstone environment fan failed trap

rsEnvirFanRecovered

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.4

   

A Fan tray on the sending device has recovered after failure. The entPhysicalDescr object identifies the recovered Fan tray

Riverstone environment fan recovered trap

rsEnvirTempExceeded

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.5

   

A temperature inside the chassis on the sending device has exceeded normal operating temperature. The entPhysicalDescr object identifies the chassis

Riverstone environment temperature exceeded trap

rsEnvirTempNormal

6

0

1.3.6.1.4.1.5567.2.33.1.2.0.6

   

A temperature inside the chassis on the sending device has returned to normal operating temperature. The entPhysicalDescr object identifies the chassis

Riverstone environment temperature normal trap


Alcatel-Lucent 7450 ESS V2 Traps

Table 11-4 lists the Alcatel-Lucent V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-34.

Table 11-4 Alcatel-Lucent 7450 ESS V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

sbi-boot-config-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

   

completed the configuration phase following a system reboot

sbi boot config

sbi-boot-snmpd-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

   

completed the SNMP daemon initialization following a system reboot

sbi boot snmpd

ssi-saveconfig-failed-v2

1.3.6.1.4.1.6527.3.1.3.1.0.3

   

saving of configuration is stopped due to errors

ssi saveconfig failed

ssi-saveconfig-succeeded-v2

1.3.6.1.4.1.6527.3.1.3.1.0.2

   

saving of configuration finished without errors

ssi saveconfig succeeded

tmnx-config-create-v2

1.3.6.1.4.1.6527.3.1.3.1.0.9

   

new row entry is created in one of the MIB tables

tmnx config create

tmnx-config-delete-v2

1.3.6.1.4.1.6527.3.1.3.1.0.10

   

an existing row entry in one of the MIB tables is deleted

tmnx config delete

tmnx-config-modify-v2

1.3.6.1.4.1.6527.3.1.3.1.0.8

   

a configuration attribute associated with a row entry in a MIB table is modified

tmnx config modify

tmnx-env-temp-too-high-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

   

temperature sensor reading on an equipment object is greater than its configured threshold

tmnx env temp too high

tmnx-eq-card-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.7

   

one of the cards in a chassis has failed

tmnx eq card failure

tmnx-eq-card-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.8

   

card is inserted into the chassis

tmnx eq card inserted

tmnx-eq-card-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.9

   

card is removed from the chassis

tmnx eq card removed

tmnx-eq-fan-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.6

   

one of the fans in a fan tray has failed

tmnx eq fan failure

tmnx-eq-flash-disk-full-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.33

   

no space left on the compact flash

tmnx eq flash disk full

tmnx-eq-port-ds1-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.18

   

DS1 interface alarm condition is cleared

tmnx eq port ds1 alarm clear

tmnx-eq-port-ds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.17

   

DS1 interface alarm condition is detected

tmnx eq port ds1 alarm

tmnx-eq-port-ds3-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.16

   

DS3 interface alarm condition is cleared

tmnx eq port ds3 alarm clear

tmnx-eq-port-ds3-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.15

   

DS3 interface alarm condition is detected

tmnx eq port ds3 alarm

tmnx-eq-port-error-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.14

   

error listed in tmnxPortNotifyError is detected on the port

tmnx eq port error

tmnx-eq-port-ether-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.23

   

ethernet port alarm condition is cleared

tmnx eq port ether alarm clear

tmnx-eq-port-ether-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.22

   

ethernet port alarm condition is detected

tmnx eq port ether alarm

tmnx-eq-port-sfp-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.8

   

SFP is inserted in the port

tmnx eq port sfp inserted

tmnx-eq-port-sfp-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.9

   

SFP is removed from the port

tmnx eq port sfp removed

tmnx-eq-port-sonet-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.5

   

a SONET/SDH port alarm condition is cleared

tmnx eq port sonet alarm clear

tmnx-eq-port-sonet-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.4

   

a SONET/SDH port alarm condition is detected

tmnx eq port sonet alarm

tmnx-eq-power-supply-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.3

   

one of the chassis's power supplies fails

tmnx eq power supply failure

tmnx-eq-power-supply-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.4

   

one of the chassis's power supplies is inserted

tmnx eq power supply inserted

tmnx-eq-power-supply-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

   

one of the chassis's power supplies is removed

tmnx eq power supply removed

tmnx-eq-wrong-card-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.10

   

wrong type of card is inserted into a slot of the chassis

tmnx eq wrong card

tmnx-red-primary-cpm-fail-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.21

   

the primary CPM fails

tmnx red primary cpm fail

tmnx-state-change-v2

1.3.6.1.4.1.6527.3.1.3.1.0.11

   

there is a change in either the adminstrative or operational state of a MIB table entry

tmnx state change

cold-start-v2

1.3.6.1.6.3.1.1.5.1

   

MIB2 V2 cold start trap

alcatel Cold start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

   

MIB2 V2 warm start trap

alcatel Warm start trap

link-down-v2

(1.3.6.1.6.3.1.1.5.3

   

MIB2 V2 link down

alcatel Link down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

   

MIB2 V2 link up

alcatel Link up trap

hdsl2shdsl-device-fault-v2

1.3.6.1.2.1.10.48.0.11

   

hdsl2shdsl device fault v2 trap

alcatel Hdsl2shdsl device fault V2 trap

bgpEstablished

1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

alcatel BGP established trap

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

alcatel BGP down trap

ospf-if-auth-failure

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

alcatel OSPF if auth failure trap

ospf-if-config-error

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

alcatel OSPF if config error trap

ospf-if-rx-bad-packet

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

alcatel OSPF if rx bad packet trap

ospf-if-state-changed

1.3.6.1.2.1.14.16.2.16

   

alcatel Ospf interface state change trap

alcatel OSPF if state change trap

sync If Timing Holdover Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.26

   

sync If Timing Holdover Trap

sync If Timing Holdover Trap

sync If Timing Holdover Clear Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.27

   

sync If Timing Holdover Clear Trap

sync If Timing Holdover Clear Trap

sync If Timing Ref1 Alarm Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.28

   

sync If Timing Ref1 Alarm Trap

sync If Timing Ref1 Alarm Trap

sync If Timing Ref1 Alarm Clear Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.29

   

sync If Timing Ref1 Alarm Clear Trap

sync If Timing Ref1 Alarm Clear Trap

sync If Timing Ref2 Alarm Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.30

   

sync If Timing Ref2 Alarm Trap

sync If Timing Ref2 Alarm Trap

sync If Timing Ref2 Alarm Clear

1.3.6.1.4.1.6527.3.1.3.2.1.0.31

   

sync If Timing Ref2 Alarm Clear

sync If Timing Ref2 Alarm Clear

flash Data Loss Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.32

   

flash Data Loss Trap

flash Data Loss Trap

software Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.16

   

software Mismatch Trap

software Mismatch Trap

software Load Failed Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.34

   

software Load Failed Trap

software Load Failed Trap

bootloader Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.35

   

bootloader Mismatch Trap

bootloader Mismatch Trap

bootrom Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.36

   

bootrom Mismatch Trap

bootrom Mismatch Trap

fpga Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.37

   

fpga Mismatch Trap

fpga Mismatch Trap

sync If Timing BITS Alarm Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.38

   

sync If Timing BITS Alarm Trap

sync If Timing BITS Alarm Trap

sync If Timing BITS Alarm Clear Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.39

   

sync If Timing BITS Alarm Clear Trap

sync If Timing BITS Alarm Clear Trap

card Upgraded Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.40

   

card Upgraded Trap

card Upgraded Trap

card Upgrade In Progress Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.41

   

card Upgrade In Progress Trap

card Upgrade In Progress Trap

card Upgrade Complete Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.42

   

card Upgrade Complete Trap

card Upgrade Complete Trap

mda Cfg Not Compatible Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.44

   

mda Cfg Not Compatible Trap

mda Cfg Not Compatible Trap

card Sync File Not Present Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.45

   

card Sync File Not Present Trap

card Sync File Not Present Trap

tmnx Eq Mda Xpl Error Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.46

   

tmnx Eq Mda Xpl Error Trap

tmnx Eq Mda Xpl Error Trap

tmnx Eq Card Pchip Error Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.47

   

tmnx Eq Card Pchip Error Trap

tmnx Eq Card Pchip Error Trap

tmnx Eq Card Soft Reset Alarm Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.48

   

tmnx Eq Card Soft Reset Alarm Trap

tmnx Eq Card Soft Reset Alarm Trap

tmnx Eq Mda Sync ENot Compatible Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.49

   

tmnx Eq Mda Sync ENot Compatible Trap

tmnx Eq Mda Sync ENot Compatible Trap

tmnx Ipsec Isa Grp Active Isa Chgd Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.50

   

tmnx Ipsec Isa Grp Active Isa Chgd Trap

tmnx Ipsec Isa Grp Active Isa Chgd Trap

tmnx Eq Card Pchip Memory Event Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.51

   

tmnx Eq Card Pchip Memory Event Trap

tmnx Eq Card Pchip Memory Event Trap

tmnx Ipsec Isa Grp Unable To Switch Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.52

   

tmnx Ipsec Isa Grp Unable To Switch Trap

tmnx Ipsec Isa Grp Unable To Switch Trap

tmnx Ipsec Isa Grp Tn lLow WMark Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.53

   

tmnx Ipsec Isa Grp Tn lLow WMark Trap

tmnx Ipsec Isa Grp Tn lLow WMark Trap

tmnx Ipsec Isa Grp Tn lHigh Wmark Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.54

   

tmnx Ipsec Isa Grp Tn lHigh Wmark Trap

tmnx Ipsec Isa Grp Tn lHigh Wmark Trap

tmnx Ipsec Isa Grp Tn lMax Trap

1.3.6.1.4.1.6527.3.1.3.2.1.0.55

   

tmnx Ipsec Isa Grp Tn lMax Trap

tmnx Ipsec Isa Grp Tn lMax Trap

svc DHCP Lse State Restore Problem Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.14

   

svc DHCP Lse State Restore Problem Trap

svc DHCP Lse State Restore Problem Trap

tmnx VRtr DHCP Suspicious Pckt Rcvd Trap

1.3.6.1.4.1.6527.3.1.3.3.0.14

   

tmnx VRtr DHCP Suspicious Pckt Rcvd Trap

tmnx VRtr DHCP Suspicious Pckt Rcvd Trap

tmnx VRtr DHCP If Lse States Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.3.0.20

   

tmnx VRtr DHCP If Lse States Exceeded Trap

tmnx VRtr DHCP If Lse States Exceeded Trap

tmnx VRtr DHCP6 Server Lse St Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.3.0.22

   

tmnx VRtr DHCP6 Server Lse St Exceeded Trap

tmnx VRtr DHCP6 Server Lse St Exceeded Trap

tmnx VRtr DHCP6 Lse State Override Trap

1.3.6.1.4.1.6527.3.1.3.3.0.23

   

tmnx VRtr DHCP6 Lse State Override Trap

tmnx VRtr DHCP6 Lse State Override Trap

tmnx VRtr DHCP6 Relay Reply Strip Uni Trap

1.3.6.1.4.1.6527.3.1.3.3.0.24

   

tmnx VRtr DHCP6 Relay Reply Strip Uni Trap

tmnx VRtr DHCP6 Relay Reply Strip Uni Trap

tmnx VRtr DHCP6 Illegal Client Addr Trap

1.3.6.1.4.1.6527.3.1.3.3.0.25

   

tmnx VRtr DHCP6 Illegal Client Addr Trap

tmnx VRtr DHCP6 Illegal Client Addr Trap

tmnx VRtr DHCP6 Assigned Illeg Subnet Trap

1.3.6.1.4.1.6527.3.1.3.3.0.26

   

tmnx VRtr DHCP6 Assigned Illeg Subnet Trap

tmnx VRtr DHCP6 Assigned Illeg Subnet Trap

svc DHCP Miscellaneous Problem Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.23

   

svc DHCP Miscellaneous Problem Trap

svc DHCP Miscellaneous Problem Trap

tIP Filter PBR Packets Drop Trap

1.3.6.1.4.1.6527.3.1.3.21.0.1

   

tIP Filter PBR Packets Drop Trap

tIP Filter PBR Packets Drop Trap

tFilter Entry Activation Failed Trap

1.3.6.1.4.1.6527.3.1.3.21.0.2

   

tFilter Entry Activation Failed Trap

tFilter Entry Activation Failed Trap

tFilter Entry Activation Restored Trap

1.3.6.1.4.1.6527.3.1.3.21.0.3

   

tFilter Entry Activation Restored Trap

tFilter Entry Activation Restored Trap

vRtr Isis Database Overload Trap

1.3.6.1.4.1.6527.3.1.3.10.0.1

   

vRtr Isis Database Overload Trap

vRtr Isis Database Overload Trap

vRtr Isis Manual Address Drops Trap

1.3.6.1.4.1.6527.3.1.3.10.0.2

   

vRtr Isis Manual Address Drops Trap

vRtr Isis Manual Address Drops Trap

vRtr Isis Corrupted LSP Detected Trap

1.3.6.1.4.1.6527.3.1.3.10.0.3

   

vRtr Isis Corrupted LSP Detected Trap

vRtr Isis Corrupted LSP Detected Trap

vRtr Isis Max Seq Exceed Attempt Trap

1.3.6.1.4.1.6527.3.1.3.10.0.4

   

vRtr Isis Max Seq Exceed Attempt Trap

vRtr Isis Max Seq Exceed Attempt Trap

vRtr Isis ID Len Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.10.0.5

   

vRtr Isis ID Len Mismatch Trap

vRtr Isis ID Len Mismatch Trap

vRtr Isis Max Area Addrs Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.10.0.6

   

vRtr Isis Max Area Addrs Mismatch Trap

vRtr Isis Max Area Addrs Mismatch Trap

vRtr Isis Own LSP Purge Trap

1.3.6.1.4.1.6527.3.1.3.10.0.7

   

vRtr Isis Own LSP Purge Trap

vRtr Isis Own LSP Purge Trap

vRtr Isis Sequence Number Skip Trap

1.3.6.1.4.1.6527.3.1.3.10.0.8

   

vRtr Isis Sequence Number Skip Trap

vRtr Isis Sequence Number Skip Trap

vRtr Isis Aut Type Fail Trap

1.3.6.1.4.1.6527.3.1.3.10.0.9

   

vRtr Isis Aut Type Fail Trap

vRtr Isis Aut Type Fail Trap

vRtr Isis Auth Fail Trap

1.3.6.1.4.1.6527.3.1.3.10.0.10

   

vRtr Isis Auth Fail Trap

vRtr Isis Auth Fail Trap

vRtr Isis Version Skew Trap

1.3.6.1.4.1.6527.3.1.3.10.0.11

   

vRtr Isis Version Skew Trap

vRtr Isis Version Skew Trap

vRtr Isis Area Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.10.0.12

   

vRtr Isis Area Mismatch Trap

vRtr Isis Area Mismatch Trap

vRtr Isis Rejected Adjacency Trap

1.3.6.1.4.1.6527.3.1.3.10.0.13

   

vRtr Isis Rejected Adjacency Trap

vRtr Isis Rejected Adjacency Trap

vRtr Isis LSP Too Large To Propagate Trap

1.3.6.1.4.1.6527.3.1.3.10.0.14

   

vRtr Isis LSP Too Large To Propagate Trap

vRtr Isis LSP Too Large To Propagate Trap

vRtr Isis Orig LSP Buf Size Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.10.0.15

   

vRtr Isis Orig LSP Buf Size Mismatch Trap

vRtr Isis Orig LSP Buf Size Mismatch Trap

vRtr Isis Proto Supp Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.10.0.16

   

vRtr Isis Proto Supp Mismatch Trap

vRtr Isis Proto Supp Mismatch Trap

vRtr Isis Adjacency Change Trap

1.3.6.1.4.1.6527.3.1.3.10.0.17

   

vRtr Isis Adjacency Change Trap

vRtr Isis Adjacency Change Trap

vRtr Isis Circ Id Exhausted Trap

1.3.6.1.4.1.6527.3.1.3.10.0.18

   

vRtr Isis Circ Id Exhausted Trap

vRtr Isis Circ Id Exhausted Trap

vRtr Isis Adj Restart Status Change Trap

1.3.6.1.4.1.6527.3.1.3.10.0.19

   

vRtr Isis Adj Restart Status Change Trap

vRtr Isis Adj Restart Status Change Trap

Dynamic Cost On Trap

1.3.6.1.4.1.6527.3.1.3.15.0.1

   

Dynamic Cost On Trap

Dynamic Cost On Trap

Dynamic Cost Off Trap

1.3.6.1.4.1.6527.3.1.3.15.0.2

   

Dynamic Cost Off Trap

Dynamic Cost Off Trap

Lag Port Add Failed Trap

1.3.6.1.4.1.6527.3.1.3.15.0.3

   

Lag Port Add Failed Trap

Lag Port Add Failed Trap

vRtr Ldp State Change Trap

1.3.6.1.4.1.6527.3.1.3.8.0.1

   

vRtr Ldp State Change Trap

vRtr Ldp State Change Trap

vRtr Ldp Instance State Change Trap

1.3.6.1.4.1.6527.3.1.3.8.0.2

   

vRtr Ldp Instance State Change Trap

vRtr Ldp Instance State Change Trap

vRtr Ldp If State Change Trap

1.3.6.1.4.1.6527.3.1.3.8.0.3

   

vRtr Ldp If State Change Trap

vRtr Ldp If State Change Trap

vRtr Ldp Group Id Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.8.0.5

   

vRtr Ldp Group Id Mismatch Trap

vRtr Ldp Group Id Mismatch Trap

tmnx Bsx Isa Aa Grp Failure V2 Trap

1.3.6.1.4.1.6527.3.1.3.63.0.5

   

tmnxBsxIsaAaGrpFailureV2

tmnx Bsx Isa Aa Grp Failure V2 Trap

tmnx Bsx Isa Aa Grp Failure Clear V2 Trap

1.3.6.1.4.1.6527.3.1.3.63.0.6

   

tmnxBsxIsaAaGrpFailureClearV2

tmnx Bsx Isa Aa Grp Failure Clear V2 Trap

tmnx Bsx Isa Aa Grp Non Redundant V2 Trap

1.3.6.1.4.1.6527.3.1.3.63.0.7

   

tmnxBsxIsaAaGrpNonRedundantV2

tmnx Bsx Isa Aa Grp Non Redundant V2 Trap

tmnxBsxIsaAaSubLoadBalance

1.3.6.1.4.1.6527.3.1.3.63.0.8

   

tmnxBsxIsaAaSubLoadBalance

tmnx Bsx Isa Aa Grp Non Redundant V2 Trap

tmnxBsxIsaAaGrpSwitchover

1.3.6.1.4.1.6527.3.1.3.63.0.2

   

tmnxBsxIsaAaGrpSwitchover

tmnx Bsx Isa AaSub Load Balance Trap

tmnxBsxIsaAaGrpFlowFull

1.3.6.1.4.1.6527.3.1.3.63.0.3

   

tmnxBsxIsaAaGrpFlowFull

tmnx Bsx Isa Aa Grp Switchover Trap

tmnxBsxIsaAaGrpFlowFullClear

1.3.6.1.4.1.6527.3.1.3.63.0.4

   

tmnxBsxIsaAaGrpFlowFullClear

tmnx Bsx Isa Aa Grp Flow Full Trap

tApsModeMismatchClear

1.3.6.1.4.1.6527.3.1.3.29.0.1

   

tApsModeMismatchClear

aps Event FEPLF Trap

tApsChannelMismatchClear

1.3.6.1.4.1.6527.3.1.3.29.0.2

   

tApsChannelMismatchClear

tAps Mode Mismatch Clear Trap

tApsPSBFClear

1.3.6.1.4.1.6527.3.1.3.29.0.3

   

tApsPSBFClear

tAps Channel Mismatch Clear Trap

tApsFEPLFClear

1.3.6.1.4.1.6527.3.1.3.29.0.4

   

tApsFEPLFClear

tAps PSBF Clear Trap

tApsLocalSwitchCommandSet

1.3.6.1.4.1.6527.3.1.3.29.0.5

   

tApsLocalSwitchCommandSet

tAps FEPLF Clear Trap

tApsLocalSwitchCommandClear

1.3.6.1.4.1.6527.3.1.3.29.0.6

   

tApsLocalSwitchCommandClear

tAps Local Switch Command Set Trap

tApsRemoteSwitchCommandSet

1.3.6.1.4.1.6527.3.1.3.29.0.7

   

tApsRemoteSwitchCommandSet

tAps Local Switch Command Clear Trap

tApsRemoteSwitchCommandClear

1.3.6.1.4.1.6527.3.1.3.29.0.8

   

tApsRemoteSwitchCommandClear

tAps Remote Switch Command Set Trap

tApsMcApsCtlLinkStateChange

1.3.6.1.4.1.6527.3.1.3.29.0.9

   

tApsMcApsCtlLinkStateChange

tAps Remote Switch Command Clear Trap

tApsChanTxLaisStateChange

1.3.6.1.4.1.6527.3.1.3.29.0.10

   

tApsChanTxLaisStateChange

tAps McAps Ctl Link State Change Trap

tBgpMaxPrefix90

1.3.6.1.4.1.6527.3.1.3.14.0.1

   

tBgpMaxPrefix90

tAps Chan Tx Lais State Change Trap

tBgpMaxPrefix100

1.3.6.1.4.1.6527.3.1.3.14.0.2

   

tBgpMaxPrefix100

tBgp Max Prefix90 Trap

tBgpPeerGRStatusChange

1.3.6.1.4.1.6527.3.1.3.14.0.3

   

tBgpPeerGRStatusChange

tBgp Max Prefix100 Trap

tBgp Max Ng Prefix90 Trap

1.3.6.1.4.1.6527.3.1.3.14.0.4

   

tBgpMaxNgPrefix90

tBgp Peer GR Status Change Trap

tBgp Max Ng Prefix100 Trap

1.3.6.1.4.1.6527.3.1.3.14.0.5

   

tBgpMaxNgPrefix100

tBgp Max Ng Prefix100 Trap

tBgp Peer Ng GR Status Change Trap

1.3.6.1.4.1.6527.3.1.3.14.0.6

   

tBgpPeerNgGRStatusChange

tBgp Peer Ng GR Status Change Trap

tBgpNgEstablished

1.3.6.1.4.1.6527.3.1.3.14.0.7

   

tBgpNgEstablished

tBgp Ng Established Trap

tBgp Ng Backward Transition Trap

1.3.6.1.4.1.6527.3.1.3.14.0.8

   

tBgpNgBackwardTransition

tBgp Ng Backward Transition Trap

tBgp Peer Ng Hold TimeInconsistent Trap

1.3.6.1.4.1.6527.3.1.3.14.0.9

   

tBgpPeerNgHoldTimeInconsistent

tBgp Peer Ng Hold TimeInconsistent Trap

sap DHCP Lease Entries Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.9

   

sapDHCPLeaseEntriesExceeded

sap DHCP Lease Entries Exceeded Trap

sap DHCP Lse State Override Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.10

   

sapDHCPLseStateOverride

sap DHCP Lse State Override Trap

sap DHCP Suspicious Pckt Rcvd Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.11

   

sapDHCPSuspiciousPcktRcvd

sap DHCP Suspicious Pckt Rcvd Trap

sap DHCP Lse State Populate Err Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.12

   

sapDHCPLseStatePopulateErr

sap DHCP Lse State Populate Err Trap

sdp Bind DHCP Lease Entries Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.10

   

sdpBindDHCPLeaseEntriesExceeded

sdp Bind DHCP Lease Entries Exceeded Trap

sdp Bind DHCP Lse State Override Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.11

   

sdpBindDHCPLseStateOverride

sdp Bind DHCP Lse State Override Trap

sdp Bind DHCP Suspicious Pckt Rcvd Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.12

   

sdpBindDHCPSuspiciousPcktRcvd

sdp Bind DHCP Suspicious Pckt Rcvd Trap

sdp Bind DHCP Lse State Populate Err Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.13

   

sdpBindDHCPLseStatePopulateErr

sdp Bind DHCP Lse State Populate Err Trap

sap Tls Mac Move Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.17

   

sapTlsMacMoveExceeded

sap Tls Mac Move Exceeded Trap

sap DHCP Proxy Server Error Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.18

   

sapDHCPProxyServerError

sap DHCP Proxy Server Error Trap

sap Port State Change Processed Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.21

   

sapPortStateChangeProcessed

sap Port State Change Processed Trap

sap DHCP Lse State Mobility Error Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.22

   

sapDHCPLseStateMobilityError

sap DHCP Lse State Mobility Error Trap

tmnx Dot3 Oam Peer Changed Trap

1.3.6.1.4.1.6527.3.1.3.42.42.0.1

   

tmnxDot3OamPeerChanged

tmnx Dot3 Oam Peer Changed Trap

tmnx Dot3 Oam Loop Detected Trap

1.3.6.1.4.1.6527.3.1.3.42.42.0.2

   

tmnxDot3OamLoopDetected

tmnx Dot3 Oam Loop Detected Trap

tmnx Dot3 Oam Loop Cleared Trap

1.3.6.1.4.1.6527.3.1.3.42.42.0.3

   

tmnxDot3OamLoopCleared

tmnx Dot3 Oam Loop Cleared Trap

dot3 Oam Non Threshold Event

1.3.6.1.2.1.158.0.2

   

dot3OamNonThresholdEvent

dot3 Oam Non Threshold Event

dot1ag Cfm Fault Alarm Trap

1.0.8802.1.1.3.0.1

   

dot1agCfmFaultAlarm

dot1ag Cfm Fault Alarm Trap

tmnx Dot1 agCfm Mep Ltm Test Complete Trap

1.3.6.1.4.1.6527.3.1.3.52.0.2

   

tmnx Dot1 agCfm Mep Ltm Test Complete Trap

tmnx Dot1 agCfm Mep Ltm Test Complete Trap

tmnx Dot1 agCfm Mep DM Test Complete Trap

1.3.6.1.4.1.6527.3.1.3.52.0.4

   

tmnx Dot1 agCfm Mep DM Test Complete Trap

tmnx Dot1 agCfm Mep DM Test Complete Trap

tmnx Dot1 agCfm Mep Ais State Changed Trap

1.3.6.1.4.1.6527.3.1.3.52.0.5

   

tmnx Dot1 agCfm Mep Ais State Changed Trap

tmnx Dot1 agCfm Mep Ais State Changed Trap

tmnx Dot1 agCfm Mip Evaluation Trap

1.3.6.1.4.1.6527.3.1.3.52.0.6

   

tmnx Dot1 agCfm Mip Evaluation Trap

tmnx Dot1 agCfm Mip Evaluation Trap

tmnx Ancp Ing Rate Monitor Event Trap

1.3.6.1.4.1.6527.3.1.3.39.0.1

   

tmnx Ancp Ing Rate Monitor Event Trap

tmnx Ancp Ing Rate Monitor Event Trap

tmnx Ancp Egr Rate Monitor Event Trap

1.3.6.1.4.1.6527.3.1.3.39.0.2

   

tmnx Ancp Egr Rate Monitor Event Trap

tmnx Ancp Egr Rate Monitor Event Trap

tmnx Ancp Shcv Disabled Event Trap

1.3.6.1.4.1.6527.3.1.3.39.0.3

   

tmnx Ancp Shcv Disabled Event Trap

tmnx Ancp Shcv Disabled Event Trap

tmnx Ancp Ses Rejected Trap

1.3.6.1.4.1.6527.3.1.3.39.0.4

   

tmnx Ancp Ses Rejected Trap

tmnx Ancp Ses Rejected Trap

tmnx Ancp String Rejected Trap

1.3.6.1.4.1.6527.3.1.3.39.0.5

   

tmnx Ancp String Rejected Trap

tmnx Ancp String Rejected Trap

sap Igmp Snpg Grp Limit Exceeded Trap

1.3.6.1.4.1.6527.3.3.3.2.1.0.1

   

sap Igmp Snpg Grp Limit Exceeded Trap

sap Igmp Snpg Grp Limit Exceeded Trap

sap Igmp Snpg Mcac Plcy Dropped Trap

1.3.6.1.4.1.6527.3.3.3.2.1.0.2

   

sap Igmp Snpg Mcac Plcy Dropped Trap

sap Igmp Snpg Mcac Plcy Dropped Trap

sdp Bnd Igmp Snpg Grp Limit Exceeded Trap

1.3.6.1.4.1.6527.3.3.3.2.2.0.1

   

sdp Bnd Igmp Snpg Grp Limit Exceeded Trap

sdp Bnd Igmp Snpg Grp Limit Exceeded Trap

sdp Bnd Igmp Snpg Mcac Plcy Dropped Trap

1.3.6.1.4.1.6527.3.3.3.2.2.0.2

   

sdp Bnd Igmp Snpg Mcac Plcy Dropped Trap

sdp Bnd Igmp Snpg Mcac Plcy Dropped Trap

sap Igmp Snpg Mcs Failure Trap

1.3.6.1.4.1.6527.3.3.3.2.1.0.3

   

sap Igmp Snpg Mcs Failure Trap

sap Igmp Snpg Mcs Failure Trap

sap Igmp Snpg Src Limit Exceeded Trap

1.3.6.1.4.1.6527.3.3.3.2.1.0.4

   

sap Igmp Snpg Src Limit Exceeded Trap

sap Igmp Snpg Src Limit Exceeded Trap

sdp Bnd Igmp Snpg Src Limit Exceeded Trap

1.3.6.1.4.1.6527.3.3.3.2.1.0.5

   

sdp Bnd Igmp Snpg Src Limit Exceeded Trap

sdp Bnd Igmp Snpg Src Limit Exceeded Trap

vRtr Isis Ldp Sync Timer Started Trap

1.3.6.1.4.1.6527.3.1.3.10.0.20

   

vRtr Isis Ldp Sync Timer Started Trap

vRtr Isis Ldp Sync Timer Started Trap

vRtr Isis Ldp Sync Exit Trap

1.3.6.1.4.1.6527.3.1.3.10.0.21

   

vRtr Isis Ldp Sync Exit Trap

vRtr Isis Ldp Sync Exit Trap

sbi Boot Li Config Trap

1.3.6.1.4.1.6527.3.1.3.1.0.40

   

sbi Boot Li Config Trap

sbi Boot Li Config Trap

source Enabled Trap

1.3.6.1.4.1.6527.3.1.3.18.0.1

   

source Enabled Trap

source Enabled Trap

source Disabled Trap

1.3.6.1.4.1.6527.3.1.3.18.0.2

   

source Disabled Trap

source Disabled Trap

destination Enabled Trap

1.3.6.1.4.1.6527.3.1.3.18.0.3

   

destination Enabled Trap

destination Enabled Trap

tmnx VRtr Inet Address Attach Failed Trap

1.3.6.1.4.1.6527.3.1.3.3.0.36

   

tmnx VRtr Inet Address Attach Failed Trap

tmnx VRtr Inet Address Attach Failed Trap

tmnx VRtr Fib Occupancy Threshold Trap

1.3.6.1.4.1.6527.3.1.3.3.0.35

   

tmnx VRtr Fib Occupancy Threshold Trap

tmnx VRtr Fib Occupancy Threshold Trap

tmnx VRtr Managed Route Add Failed Trap

1.3.6.1.4.1.6527.3.1.3.3.0.37

   

tmnx VRtr Managed Route Add Failed Trap

tmnx VRtr Managed Route Add Failed Trap

tmnx VRtr Bfd Session Prot Change Trap

1.3.6.1.4.1.6527.3.1.3.3.0.33

   

tmnx VRtr Bfd Session Prot Change Trap

tmnx VRtr Bfd Session Prot Change Trap

tmnx VRtr Bfd Session Deleted Trap

1.3.6.1.4.1.6527.3.1.3.3.0.34

   

tmnx VRtr Bfd Session Deleted Trap

tmnx VRtr Bfd Session Deleted Trap

tmnx VRtr Static Route CPE Status Trap

1.3.6.1.4.1.6527.3.1.3.3.0.32

   

tmnx VRtr Static Route CPE Status Trap

tmnx VRtr Static Route CPE Status Trap

tmnx VRtr IPv6 High Route Cleared Trap

1.3.6.1.4.1.6527.3.1.3.3.0.31

   

tmnx VRtr IPv6 High Route Cleared Trap

tmnx VRtr IPv6 High Route Cleared Trap

tmnx VRtr IPv6 Mid Route TCA Trap

1.3.6.1.4.1.6527.3.1.3.3.0.29

   

tmnx VRtr IPv6 Mid Route TCA Trap

tmnx VRtr IPv6 Mid Route TCA Trap

tmnx VRtr Bfd Session Up Trap

1.3.6.1.4.1.6527.3.1.3.3.0.28

   

tmnx VRtr Bfd Session Up Trap

tmnx VRtr Bfd Session Up Trap

tmnx VRtr Bfd Port Type Not Supported Trap

1.3.6.1.4.1.6527.3.1.3.3.0.19

   

tmnx VRtr Bfd Port Type Not Supported Trap

tmnx VRtr Bfd Port Type Not Supported Trap

tmnx VRtr Bfd Max Session On Slot Trap

1.3.6.1.4.1.6527.3.1.3.3.0.18

   

tmnx VRtr Bfd Max Session On Slot Trap

tmnx VRtr Bfd Max Session On Slot Trap

tmnx VRtr Bfd Session Down Trap

1.3.6.1.4.1.6527.3.1.3.3.0.17

   

tmnx VRtr Bfd Session Down Trap

tmnx VRtr Bfd Session Down Trap

tmnx VRtr Max Arp Entries Cleared Trap

1.3.6.1.4.1.6527.3.1.3.3.0.9

   

tmnx VRtr Max Arp Entries Cleared Trap

tmnx VRtr Max Arp Entries Cleared Trap

tmnx VRtr Max Routes Trap

1.3.6.1.4.1.6527.3.1.3.3.0.11

   

tmnx VRtr Max Routes Trap

tmnx VRtr Max Routes Trap

tmnx VRtr Max Arp Entries TCA Trap

1.3.6.1.4.1.6527.3.1.3.3.0.8

   

tmnx VRtr Max Arp Entries TCA Trap

tmnx VRtr Max Arp Entries TCA Trap

tmnx VRtr Illegal Label TCA Trap

1.3.6.1.4.1.6527.3.1.3.3.0.4

   

tmnx VRtr Illegal Label TCA Trap

tmnx VRtr Illegal Label TCA Trap

tmnx VRtr High Route Cleared Trap

1.3.6.1.4.1.6527.3.1.3.3.0.3

   

tmnx VRtr High Route Cleared Trap

tmnx VRtr High Route Cleared Trap

tmnx VRtr High Route TCA Trap

1.3.6.1.4.1.6527.3.1.3.3.0.2

   

tmnx VRtr High Route TCA Trap

tmnx VRtr High Route TCA Trap

tmnx VRtr Mid Route TCA Trap

1.3.6.1.4.1.6527.3.1.3.3.0.1

   

tmnx VRtr Mid Route TCA Trap

tmnx VRtr Mid Route TCA Trap

tmnx Vrrp Became Backup Trap

1.3.6.1.4.1.6527.3.1.3.20.0.4

   

tmnx Vrrp Became Backup Trap

tmnx Vrrp Became Backup Trap

tmnx Vrrp Multiple Owners Trap

1.3.6.1.4.1.6527.3.1.3.20.0.3

   

tmnx Vrrp Multiple Owners Trap

tmnx Vrrp Multiple Owners Trap

tmnx Vrrp IP List Mismatch Clear Trap

1.3.6.1.4.1.6527.3.1.3.20.0.2

   

tmnx Vrrp IP List Mismatch Clear Trap

tmnx Vrrp IP List Mismatch Clear Trap

tmnx Vrrp IP List Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.20.0.1

   

tmnx Vrrp IP List Mismatch Trap

tmnx Vrrp IP List Mismatch Trap

tmnx Log File Deleted Trap

1.3.6.1.4.1.6527.3.1.3.12.0.5

   

tmnx Log File Deleted Trap

tmnx Log File Deleted Trap

tmnx Test Event Trap

1.3.6.1.4.1.6527.3.1.3.12.0.6

   

tmnx Test Event Trap

tmnx Test Event Trap

tmnx Log Event Throttled Trap

1.3.6.1.4.1.6527.3.1.3.12.0.8

   

tmnx Log Event Throttled Trap

tmnx Log Event Throttled Trap

tmnx SysLog Target Problem Trap

1.3.6.1.4.1.6527.3.1.3.12.0.9

   

tmnx SysLog Target Problem Trap

tmnx SysLog Target Problem Trap

tmnx Log Accounting Data Loss Trap

1.3.6.1.4.1.6527.3.1.3.12.0.10

   

tmnx Log Accounting Data Loss Trap

tmnx Log Accounting Data Loss Trap

tmnx Std Events Replayed Trap

1.3.6.1.4.1.6527.3.1.3.12.0.11

   

tmnx Std Events Replayed Trap

tmnx Std Events Replayed Trap

tmnx Ntp Auth Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.38.0.1

   

tmnx Ntp Auth Mismatch Trap

tmnx Ntp Auth Mismatch Trap

tmnx Ntp No Servers Avail Trap

1.3.6.1.4.1.6527.3.1.3.38.0.2

   

tmnx Ntp No Servers Avail Trap

tmnx Ntp No Servers Avail Trap

tmnx Ntp Servers Avail Trap

1.3.6.1.4.1.6527.3.1.3.38.0.3

   

tmnx Ntp Servers Avail Trap

tmnx Ntp Servers Avail Trap

tmnx Ntp Max Freq Dft Exceed Trap

1.3.6.1.4.1.6527.3.1.3.38.0.4

   

tmnx Ntp Max Freq Dft Exceed Trap

tmnx Ntp Max Freq Dft Exceed Trap

tmnx Ntp Oper Change Trap

1.3.6.1.4.1.6527.3.1.3.38.0.7

   

tmnx Ntp Oper Change Trap

tmnx Ntp Oper Change Trap

tmnx Ntp Server Change Trap

1.3.6.1.4.1.6527.3.1.3.38.0.8

   

tmnx Ntp Server Change Trap

tmnx Ntp Server Change Trap

yellow Diff Delay Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.19

   

yellow Diff Delay Exceeded Trap

yellow Diff Delay Exceeded Trap

red Diff Delay Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.20

   

red Diff Delay Exceeded Trap

red Diff Delay Exceeded Trap

bndl Bad End Pt Discriminator Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.21

   

bndl Bad End Pt Discriminator Trap

bndl Bad End Pt Discriminator Trap

tmnx Ppp Cp Up Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.1

   

tmnx Ppp Cp Up Trap

tmnx Ppp Cp Up Trap

tmnx Ppp Cp Down Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.2

   

tmnx Ppp Cp Down Trap

tmnx Ppp Cp Down Trap

tmnx Ppp Ncp Up Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.3

   

tmnx Ppp Ncp Up Trap

tmnx Ppp Ncp Up Trap

tmnx Ppp Ncp Down Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.4

   

tmnx Ppp Ncp Down Trap

tmnx Ppp Ncp Down Trap

tmnx Ppp Keepalive Failure Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.5

   

tmnx Ppp Keepalive Failure Trap

tmnx Ppp Keepalive Failure Trap

tmnx Ppp Lqm Failure Trap

1.3.6.1.4.1.6527.3.1.2.2.5.1.1.6

   

tmnx Ppp Lqm Failure Trap

tmnx Ppp Lqm Failure Trap

tmnx Ppp Loopback Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.7

   

tmnx Ppp Loopback Trap

tmnx Ppp Loopback Trap

tmnx Ppp Loopback Clear Trap

1.3.6.1.4.1.6527.3.1.3.2.3.0.8

   

tmnx Ppp Loopback Clear Trap

tmnx Ppp Loopback Clear Trap

vRtr Rip Auth Type Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.9.0.1

   

vRtr Rip Auth Type Mismatch Trap

vRtr Rip Auth Type Mismatch Trap

vRtr Rip Auth Type Failure Trap

1.3.6.1.4.1.6527.3.1.3.9.0.2

   

vRtr Rip Auth Type Failure Trap

vRtr Rip Auth Type Failure Trap

vRtr Rip Instance Shutting Down Trap

1.3.6.1.4.1.6527.3.1.3.9.0.3

   

vRtr Rip Instance Shutting Down Trap

vRtr Rip Instance Shutting Down Trap

vRtr Rip Instance Restarted Trap

1.3.6.1.4.1.6527.3.1.3.9.0.4

   

vRtr Rip Instance Restarted Trap

vRtr Rip Instance Restarted Trap

vRtr Rsvp State Change Trap

1.3.6.1.4.1.6527.3.1.3.7.0.1

   

vRtr Rsvp State Change Trap

vRtr Rsvp State Change Trap

vRtr Rsvp If State Change Trap

1.3.6.1.4.1.6527.3.1.3.7.0.2

   

vRtr Rsvp If State Change Trap

vRtr Rsvp If State Change Trap

vRtr Rsvp If Nbr State Up Trap

1.3.6.1.4.1.6527.3.1.3.7.0.3

   

vRtr Rsvp If Nbr State Up Trap

vRtr Rsvp If Nbr State Up Trap

vRtr Rsvp If Nbr State Down Trap

1.3.6.1.4.1.6527.3.1.3.7.0.4

   

vRtr Rsvp If Nbr State Down Trap

vRtr Rsvp If Nbr State Down Trap

new Root Vcp State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.4

   

new Root Vcp State Trap

new Root Vcp State Trap

new Root Bridge Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.7

   

new Root Bridge Trap

new Root Bridge Trap

svc Tls Mac Pinning Violation Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.11

   

svc Tls Mac Pinning Violation Trap

svc Tls Mac Pinning Violation Trap

svc Tls Fdb Table Full Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.4

   

svc Tls Fdb Table Full Alarm Raised Trap

svc Tls Fdb Table Full Alarm Raised Trap

svc Tls Fdb Table Full Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.5

   

svc Tls Fdb Table Full Alarm Cleared Trap

svc Tls Fdb Table Full Alarm Cleared Trap

ies If Status Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.8

   

ies If Status Changed Trap

ies If Status Changed Trap

svc Tls Mfib Table Full Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.9

   

svc Tls Mfib Table Full Alarm Raised Trap

svc Tls Mfib Table Full Alarm Raised Trap

svc Tls Mfib Table Full Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.10

   

svc Tls Mfib Table Full Alarm Cleared Trap

svc Tls Mfib Table Full Alarm Cleared Trap

radius Oper Status Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.7

   

radius Oper Status Change Trap

radius Oper Status Change Trap

tacp lus Oper Status Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.20

   

tacp lus Oper Status Change Trap

tacp lus Oper Status Change Trap

tacp lus Inet Srvr Oper Status Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.35

   

tacp lus Inet Srvr Oper Status Change Trap

tacp lus Inet Srvr Oper Status Change Trap

radius Inet Server Oper Status Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.36

   

radius Inet Server Oper Status Change Trap

radius Inet Server Oper Status Change Trap

rising Alarm Trap

1.3.6.1.2.1.16.0.1

   

rising Alarm Trap

rising Alarm Trap

falling Alarm Trap

1.3.6.1.2.1.16.0.2

   

falling Alarm Trap

falling Alarm Trap

topology Change Sap Major State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.1

   

topology Change Sap Major State Trap

topology Change Sap Major State Trap

new Root Sap Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.2

   

new Root Sap Trap

new Root Sap Trap

topology Change Sap State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.5

   

topology Change Sap State Trap

topology Change Sap State Trap

received TCN Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.6

   

received TCN Trap

received TCN Trap

unacknowledged TCN Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.8

   

unacknowledged TCN Trap

unacknowledged TCN Trap

higher Priority Bridge Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.9

   

higher Priority Bridge Trap

higher Priority Bridge Trap

sap Encap PVST Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.11

   

sap Encap PVST Trap

sap Encap PVST Trap

sap Encap Dot1d Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.12

   

sap Encap Dot1d Trap

sap Encap Dot1d Trap

tmnx Svc Topo Chg Sdp Bind Major State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.14

   

tmnx Svc Topo Chg Sdp Bind Major State Trap

tmnx Svc Topo Chg Sdp Bind Major State Trap

tmnx Oam Saa Threshold Trap

1.3.6.1.4.1.6527.3.1.3.11.3.0.1

   

tmnx Oam Saa Threshold Trap

tmnx Oam Saa Threshold Trap

tmnx Ospf Virt If State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.1

   

tmnx Ospf Virt If State Change Trap

tmnx Ospf Virt If State Change Trap

tmnx Ospf Nbr State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.2

   

tmnx Ospf Nbr State Change Trap

tmnx Ospf Nbr State Change Trap

tmnx Ospf Virt Nbr State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.3

   

tmnx Ospf Virt Nbr State Change Trap

tmnx Ospf Virt Nbr State Change Trap

tmnx Ospf If Config Error Trap

1.3.6.1.4.1.6527.3.1.3.36.0.4

   

tmnx Ospf If Config Error Trap

tmnx Ospf If Config Error Trap

tmnx Ospf Virt If Config Error Trap

1.3.6.1.4.1.6527.3.1.3.36.0.5

   

tmnx Ospf Virt If Config Error Trap

tmnx Ospf Virt If Config Error Trap

tmnx OspfIfAuthFailure Trap

1.3.6.1.4.1.6527.3.1.3.36.0.6

   

tmnx OspfIfAuthFailure Trap

tmnx OspfIfAuthFailure Trap

tmnx Ospf Virt If Auth Failure Trap

1.3.6.1.4.1.6527.3.1.3.36.0.7

   

tmnx Ospf Virt If Auth Failure Trap

tmnx Ospf Virt If Auth Failure Trap

tmnx Ospf If Rx Bad Packet Trap

1.3.6.1.4.1.6527.3.1.3.36.0.8

   

tmnx Ospf If Rx Bad Packet Trap

tmnx Ospf If Rx Bad Packet Trap

tmnx Ospf Virt If Rx Bad Packet Trap

1.3.6.1.4.1.6527.3.1.3.36.0.9

   

tmnx Ospf Virt If Rx Bad Packet Trap

tmnx Ospf Virt If Rx Bad Packet Trap

tmnx Ospf Tx Retransmit Trap

1.3.6.1.4.1.6527.3.1.3.36.0.10

   

tmnx Ospf Tx Retransmit Trap

tmnx Ospf Tx Retransmit Trap

tmnx Ospf Virt If Tx Retransmit Trap

1.3.6.1.4.1.6527.3.1.3.36.0.11

   

tmnx Ospf Virt If Tx Retransmit Trap

tmnx Ospf Virt If Tx Retransmit Trap

tmnx Ospf Area Originate Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.12

   

tmnx Ospf Area Originate Lsa Trap

tmnx Ospf Area Originate Lsa Trap

tmnx Ospf Area Max Age Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.13

   

tmnx Ospf Area Max Age Lsa Trap

tmnx Ospf Area Max Age Lsa Trap

tmnx Ospf Lsdb Overflow Trap

1.3.6.1.4.1.6527.3.1.3.36.0.14

   

tmnx Ospf Lsdb Overflow Trap

tmnx Ospf Lsdb Overflow Trap

tmnx Ospf Lsdb Approaching Overflow Trap

1.3.6.1.4.1.6527.3.1.3.36.0.15

   

tmnx Ospf Lsdb Approaching Overflow Trap

tmnx Ospf Lsdb Approaching Overflow Trap

tmnx Ospf If State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.16

   

tmnx Ospf If State Change Trap

tmnx Ospf If State Change Trap

tmnx Ospf Nssa Translator Status Chg Trap

1.3.6.1.4.1.6527.3.1.3.36.0.17

   

tmnx Ospf Nssa Translator Status Chg Trap

tmnx Ospf Nssa Translator Status Chg Trap

tmnx Ospf Restart Status Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.18

   

tmnx Ospf Restart Status Change Trap

tmnx Ospf Restart Status Change Trap

tmnx Ospf Nbr Restart Hlpr Sts Chg Trap

1.3.6.1.4.1.6527.3.1.3.36.0.19

   

tmnx Ospf Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Virt Nbr Restart Hlpr Sts Chg Trap

1.3.6.1.4.1.6527.3.1.3.36.0.20

   

tmnx Ospf Virt Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Virt Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Spf Runs Stopped Trap

1.3.6.1.4.1.6527.3.1.3.36.0.21

   

tmnx Ospf Spf Runs Stopped Trap

tmnx Ospf Spf Runs Stopped Trap

tmnx Ospf Spf RunsRestarted Trap

1.3.6.1.4.1.6527.3.1.3.36.0.22

   

tmnx Ospf Spf RunsRestarted Trap

tmnx Ospf Spf RunsRestarted Trap

tmnx Ospf Overload Entered Trap

1.3.6.1.4.1.6527.3.1.3.36.0.23

   

tmnx Ospf Overload Entered Trap

tmnx Ospf Overload Entered Trap

tmnx Ospf Overload Exited Trap

1.3.6.1.4.1.6527.3.1.3.36.0.24

   

tmnx Ospf Overload Exited Trap

tmnx Ospf Overload Exited Trap

tmnx Ospf As Originate Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.25

   

tmnx Ospf As Originate Lsa Trap

tmnx Ospf As Originate Lsa Trap

tmnx Ospf As Max Age Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.26

   

tmnx Ospf As Max Age Lsa Trap

tmnx Ospf As Max Age Lsa Trap

tmnx Ospf Link Originate Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.27

   

tmnx Ospf Link Originate Lsa Trap

tmnx Ospf Link Originate Lsa Trap

tmnx Ospf Link Max Age Lsa Trap

1.3.6.1.4.1.6527.3.1.3.36.0.28

   

tmnx Ospf Link Max Age Lsa Trap

tmnx Ospf Link Max Age Lsa Trap

tmnx Ospf Ldp Sync Timer Started Trap

1.3.6.1.4.1.6527.3.1.3.36.0.51

   

tmnx Ospf Ldp Sync Timer Started Trap

tmnx Ospf Ldp Sync Timer Started Trap

tmnx Ospf Ldp Sync Exit Trap

1.3.6.1.4.1.6527.3.1.3.36.0.52

   

tmnx Ospf Ldp Sync Exit Trap

tmnx Ospf Ldp Sync Exit Trap

tmnx Ospf Sham If State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.31

   

tmnx Ospf Sham If State Change Trap

tmnx Ospf Sham If State Change Trap

tmnx Ospf Sham Nbr State Change Trap

1.3.6.1.4.1.6527.3.1.3.36.0.32

   

tmnx Ospf Sham Nbr State Change Trap

tmnx Ospf Sham Nbr State Change Trap

tmnx Ospf Sham If Config Error Trap

1.3.6.1.4.1.6527.3.1.3.36.0.33

   

tmnx Ospf Sham If Config Error Trap

tmnx Ospf Sham If Config Error Trap

tmnx Ospf Sham If Auth Failure Trap

1.3.6.1.4.1.6527.3.1.3.36.0.34

   

tmnx Ospf Sham If Auth Failure Trap

tmnx Ospf Sham If Auth Failure Trap

tmnx Ospf Sham If Rx Bad Packet Trap

1.3.6.1.4.1.6527.3.1.3.36.0.35

   

tmnx Ospf Sham If Rx Bad Packet Trap

tmnx Ospf Sham If Rx Bad Packet Trap

tmnx Ospf Sham If Tx Retransmit Trap

1.3.6.1.4.1.6527.3.1.3.36.0.36

   

tmnx Ospf Sham If Tx Retransmit Trap

tmnx Ospf Sham If Tx Retransmit Trap

tmnx Ospf Sham Nbr Restart Hlpr Sts Chg Trap

1.3.6.1.4.1.6527.3.1.3.36.0.37

   

tmnx Ospf Sham Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Sham Nbr Restart Hlpr Sts Chg Trap

tmnx Ospf Failure Disabled Trap

1.3.6.1.4.1.6527.3.1.3.36.0.38

   

tmnx Ospf Failure Disabled Trap

tmnx Ospf Failure Disabled Trap

tmnx Pim Snpg If Neighbor Loss Trap

1.3.6.1.4.1.6527.3.1.3.53.0.1

   

tmnx Pim Snpg If Neighbor Loss Trap

tmnx Pim Snpg If Neighbor Loss Trap

tmnx Pim Snpg If Neighbor Up Trap

1.3.6.1.4.1.6527.3.1.3.53.0.2

   

tmnx Pim Snpg If Neighbor Up Trap

tmnx Pim Snpg If Neighbor Up Trap

tmnx Pim Snpg SG Limit Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.53.0.3

   

tmnx Pim Snpg SG Limit Exceeded Trap

tmnx Pim Snpg SG Limit Exceeded Trap

tmnx Pim Snpg Snoop Mode Changed Trap

1.3.6.1.4.1.6527.3.1.3.53.0.4

   

tmnx Pim Snpg Snoop Mode Changed Trap

tmnx Pim Snpg Snoop Mode Changed Trap

tmnx Key Chain Auth Failure Trap

1.3.6.1.4.1.6527.3.1.3.22.0.2

   

tmnx Key Chain Auth Failure Trap

tmnx Key Chain Auth Failure Trap

tmnx Cpm Prot Viol Port Trap

1.3.6.1.4.1.6527.3.1.3.22.0.3

   

tmnx Cpm Prot Viol Port Trap

tmnx Cpm Prot Viol Port Trap

tmnx Cpm Prot Viol Port Agg Trap

1.3.6.1.4.1.6527.3.1.3.22.0.4

   

tmnx Cpm Prot Viol Port Agg Trap

tmnx Cpm Prot Viol Port Agg Trap

tmnx Cpm Prot Viol If Trap

1.3.6.1.4.1.6527.3.1.3.22.0.5

   

tmnx Cpm Prot Viol If Trap

tmnx Cpm Prot Viol If Trap

tmnx Cpm Prot Viol Sap Trap

1.3.6.1.4.1.6527.3.1.3.22.0.6

   

tmnx Cpm Prot Viol Sap Trap

tmnx Cpm Prot Viol Sap Trap

tmnx Cpm Prot Viol Mac Trap

1.3.6.1.4.1.6527.3.1.3.22.0.7

   

tmnx Cpm Prot Viol Mac Trap

tmnx Cpm Prot Viol Mac Trap

tmnx Cpm Prot Viol Vdo Svc Client Trap

1.3.6.1.4.1.6527.3.1.3.22.0.8

   

tmnx Cpm Prot Viol Vdo Svc Client Trap

tmnx Cpm Prot Viol Vdo Svc Client Trap

tmnx Cpm Prot Viol Vdo Vrtr Client Trap

1.3.6.1.4.1.6527.3.1.3.22.0.9

   

tmnx Cpm Prot Viol Vdo Vrtr Client Trap

tmnx Cpm Prot Viol Vdo Vrtr Client Trap

tmnx Svc New Root Sdp Bind Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.15

   

tmnx Svc New Root Sdp Bind Trap

tmnx Svc New Root Sdp Bind Trap

tmnx Svc Topo Chg Sdp Bind State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.16

   

tmnx Svc Topo Chg Sdp Bind State Trap

tmnx Svc Topo Chg Sdp Bind State Trap

tmnx Svc Sdp Bind Rcvd TCN Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.17

   

tmnx Svc Sdp Bind Rcvd TCN Trap

tmnx Svc Sdp Bind Rcvd TCN Trap

tmnx Svc Sdp Bind Rcvd Higher Bri Prio Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.18

   

tmnx Svc Sdp Bind Rcvd Higher Bri Prio Trap

tmnx Svc Sdp Bind Rcvd Higher Bri Prio Trap

tmnx Svc Sdp Bind Encap PVST Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.19

   

tmnx Svc Sdp Bind Encap PVST Trap

tmnx Svc Sdp Bind Encap PVST Trap

tmnx Svc Sdp Bind Encap Dot1d Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.20

   

tmnx Svc Sdp Bind Encap Dot1d Trap

tmnx Svc Sdp Bind Encap Dot1d Trap

tmnx Stp Root Guard Violation Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.35

   

tmnx Stp Root Guard Violation Trap

tmnx Stp Root Guard Violation Trap

tmnx Stp Mesh Not In Mst Region Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.36

   

tmnx Stp Mesh Not In Mst Region Trap

tmnx Stp Mesh Not In Mst Region Trap

tmnx Sap Stp Excep Cond State Chng Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.37

   

tmnx Sap Stp Excep Cond State Chng Trap

tmnx Sap Stp Excep Cond State Chng Trap

tmnx Sdp Bnd Stp Excep Cond State Chng Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.38

   

tmnx Sdp Bnd Stp Excep Cond State Chng Trap

tmnx Sdp Bnd Stp Excep Cond State Chng Trap

sap Active Protocol Change Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.30

   

sap Active Protocol Change Trap

sap Active Protocol Change Trap

tmnx Svc Sdp Active Protocol Change Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.31

   

tmnx Svc Sdp Active Protocol Change Trap

tmnx Svc Sdp Active Protocol Change Trap

vcp Active Protocol Change Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.32

   

vcp Active Protocol Change Trap

vcp Active Protocol Change Trap

svc Status Changed Trap

1.3.6.1.4.1.164.40.1.1.7.2.2.2.3

   

svc Status Changed Trap

svc Status Changed Trap

sap Status Changed Trap

1.3.6.1.4.1.164.40.1.1.7.2.2.3.3

   

sap Status Changed Trap

sap Status Changed Trap

sap Tls Mac Addr Limit Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.4

   

sap Tls Mac Addr Limit Alarm Raised Trap

sap Tls Mac Addr Limit Alarm Raised Trap

sap Tls Mac Addr Limit Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.5

   

sap Tls Mac Addr Limit Alarm Cleared Trap

sap Tls Mac Addr Limit Alarm Cleared Trap

host Connectivity Lost Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.13

   

host Connectivity Lost Trap

host Connectivity Lost Trap

host Connectivity Restored Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.14

   

host Connectivity Restored Trap

host Connectivity Restored Trap

sap Received Prot Src Mac Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.15

   

sap Received Prot Src Mac Trap

sap Received Prot Src Mac Trap

sap Tls Mac Move Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.17

   

sap Tls Mac Move Exceeded Trap

sap Tls Mac Move Exceeded Trap

sap Port State Change Processed Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.21

   

sap Port State Change Processed Trap

sap Port State Change Processed Trap

sap Cem Packet Defect Alarm Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.23

   

sap Cem Packet Defect Alarm Trap

sap Cem Packet Defect Alarm Trap

sap Cem Packet Defect Alarm Clear Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.24

   

sap Cem Packet Defect Alarm Clear Trap

sap Cem Packet Defect Alarm Clear Trap

msap State Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.25

   

msap State Changed Trap

msap State Changed Trap

msap Creation Failure Trap

1.3.6.1.4.1.6527.3.1.3.4.3.0.26

   

msap Creation Failure Trap

msap Creation Failure Trap

sdp Status Changed Trap

1.3.6.1.4.1.164.40.1.1.7.2.2.4.3

   

sdp Status Changed Trap

sdp Status Changed Trap

sdp Bind Status Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.6

   

sdp Bind Status Changed Trap

sdp Bind Status Changed Trap

sdp Tls Mac Addr Limit Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.7

   

sdp Tls Mac Addr Limit Alarm Raised Trap

sdp Tls Mac Addr Limit Alarm Raised Trap

sdp Tls Mac Addr Limit Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.8

   

sdp Tls Mac Addr Limit Alarm Cleared Trap

sdp Tls Mac Addr Limit Alarm Cleared Trap

sdp Bind Pw Peer Status Bits Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.14

   

sdp Bind Pw Peer Status Bits Changed Trap

sdp Bind Pw Peer Status Bits Changed Trap

sdp Bind Tls Mac Move Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.15

   

sdp Bind Tls Mac Move Exceeded Trap

sdp Bind Tls Mac Move Exceeded Trap

sdp Bind Pw Peer Fault Addr Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.16

   

sdp Bind Pw Peer Fault Addr Changed Trap

sdp Bind Pw Peer Fault Addr Changed Trap

sdp Bind Sdp State Change Processed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.20

   

sdp Bind Sdp State Change Processed Trap

sdp Bind Sdp State Change Processed Trap

sdp Bind Insufficient Bandwidth Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.23

   

sdp Bind Insufficient Bandwidth Trap

sdp Bind Insufficient Bandwidth Trap

dynamic Sdp Config Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.24

   

dynamic Sdp Config Changed Trap

dynamic Sdp Config Changed Trap

dynamic Sdp Bind Config Changed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.25

   

dynamic Sdp Bind Config Changed Trap

dynamic Sdp Bind Config Changed Trap

dynamic Sdp Creation Failed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.26

   

dynamic Sdp Creation Failed Trap

dynamic Sdp Creation Failed Trap

dynamic Sdp Bind Creation Failed Trap

1.3.6.1.4.1.6527.3.1.3.4.4.0.27

   

dynamic Sdp Bind Creation Failed Trap

dynamic Sdp Bind Creation Failed Trap

sti Date And Time Changed Trap

1.3.6.1.4.1.6527.3.1.3.1.0.1

   

sti Date And Time Changed Trap

sti Date And Time Changed Trap

tmnx Module Malloc Failed Trap

1.3.6.1.4.1.6527.3.1.3.1.0.12

   

tmnx Module Malloc Failed Trap

tmnx Module Malloc Failed Trap

tmnx Trap Dropped Trap

1.3.6.1.4.1.6527.3.1.3.1.0.13

   

tmnx Trap Dropped Trap

tmnx Trap Dropped Trap

ssi Sync Config OK Trap

1.3.6.1.4.1.6527.3.1.3.1.0.14

   

ssi Sync Config OK Trap

ssi Sync Config OK Trap

ssi Sync Config Failed Trap

1.3.6.1.4.1.6527.3.1.3.1.0.15

   

ssi Sync Config Failed Trap

ssi Sync Config Failed Trap

ssi Sync Boot Env OK Trap

1.3.6.1.4.1.6527.3.1.3.1.0.16

   

ssi Sync Boot Env OK Trap

ssi Sync Boot Env OK Trap

ssi Sync Boot Env Failed Trap

1.3.6.1.4.1.6527.3.1.3.1.0.17

   

ssi Sync Boot Env Failed Trap

ssi Sync Boot Env Failed Trap

sntp Time Diff Exceeds Threshold Trap

1.3.6.1.4.1.6527.3.1.3.1.0.18

   

sntp Time Diff Exceeds Threshold Trap

sntp Time Diff Exceeds Threshold Trap

tmnx Snmpd State Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.23

   

tmnx Snmpd State Change Trap

tmnx Snmpd State Change Trap

tmnx Red Standby Syncing Trap

1.3.6.1.4.1.6527.3.1.3.1.0.24

   

tmnx Red Standby Syncing Trap

tmnx Red Standby Syncing Trap

tmnx Red Standby Ready Trap

1.3.6.1.4.1.6527.3.1.3.1.0.25

   

tmnx Red Standby Ready Trap

tmnx Red Standby Ready Trap

tmnx Red Standby Sync Lost Trap

1.3.6.1.4.1.6527.3.1.3.1.0.26

   

tmnx Red Standby Sync Lost Trap

tmnx Red Standby Sync Lost Trap

tmnx Red Switch over Trap

1.3.6.1.4.1.6527.3.1.3.1.0.27

   

tmnx Red Switch over Trap

tmnx Red Switch over Trap

tmnx Red Cpm Active Trap

1.3.6.1.4.1.6527.3.1.3.1.0.28

   

tmnx Red Cpm Active Trap

tmnx Red Cpm Active Trap

tmnx Red Single Cpm Trap

1.3.6.1.4.1.6527.3.1.3.1.0.29

   

tmnx Red Single Cpm Trap

tmnx Red Single Cpm Trap

persistency Closed Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.1.0.30

   

persistency Closed Alarm Raised Trap

persistency Closed Alarm Raised Trap

persistency Closed Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.1.0.31

   

persistency Closed Alarm Cleared Trap

persistency Closed Alarm Cleared Trap

tmnx Sntp Oper Change Trap

1.3.6.1.4.1.6527.3.1.3.1.0.32

   

tmnx Sntp Oper Change Trap

tmnx Sntp Oper Change Trap

tmnx Ftp Client Failure Trap

1.3.6.1.4.1.6527.3.1.3.1.0.34

   

tmnx Ftp Client Failure Trap

tmnx Ftp Client Failure Trap

persistency Event Report Trap

1.3.6.1.4.1.6527.3.1.3.1.0.37

   

persistency Event Report Trap

persistency Event Report Trap

sbi Boot Config Fail File Error Trap

1.3.6.1.4.1.6527.3.1.3.1.0.38

   

sbi Boot Config Fail File Error Trap

sbi Boot Config Fail File Error Trap

sbi Boot Config OK File Error Trap

1.3.6.1.4.1.6527.3.1.3.1.0.39

   

sbi Boot Config OK File Error Trap

sbi Boot Config OK File Error Trap

sched Action Failure Trap

1.3.6.1.2.1.63.2.0.1

   

sched Action Failure Trap

sched Action Failure Trap

sm Script Abort Trap

1.3.6.1.2.1.64.2.0.1

   

sm Script Abort Trap

sm Script Abort Trap

sm Script Result Trap

1.3.6.1.2.1.64.2.0.2

   

sm Script Result Trap

sm Script Result Trap

sm Script Exception Trap

1.3.6.1.2.1.64.2.0.3

   

sm Script Exception Trap

sm Script Exception Trap

tmnx Vdo Duplicate SsrcId Trap

1.3.6.1.4.1.6527.3.1.3.61.0.1

   

tmnx Vdo Duplicate SsrcId Trap

tmnx Vdo Duplicate SsrcId Trap

tmnx Vdo Mda Sessions Limit Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.61.0.2

   

tmnx Vdo Mda Sessions Limit Exceeded Trap

tmnx Vdo Mda Sessions Limit Exceeded Trap

tmnx Vdo Mda SG Limit Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.61.0.3

   

tmnx Vdo Mda SG Limit Exceeded Trap

tmnx Vdo Mda SG Limit Exceeded Trap

tmnx Vdo Mda Sessions Limit Cleared Trap

1.3.6.1.4.1.6527.3.1.3.61.0.4

   

tmnx Vdo Mda Sessions Limit Cleared Trap

tmnx Vdo Mda Sessions Limit Cleared Trap

tmnx Vdo Mda SG Limit Cleared Trap

1.3.6.1.4.1.6527.3.1.3.61.0.5

   

tmnx Vdo Mda SG Limit Cleared Trap

tmnx Vdo Mda SG Limit Cleared Trap

tmnx Vdo Ad Splice Abort Trap

1.3.6.1.4.1.6527.3.1.3.61.0.6

   

tmnx Vdo Ad Splice Abort Trap

tmnx Vdo Ad Splice Abort Trap

tmnx Vdo Client Sessions Lmt Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.61.0.7

   

tmnx Vdo Client Sessions Lmt Exceeded Trap

tmnx Vdo Client Sessions Lmt Exceeded Trap

tmnx Vdo Client Sessions Lmt Cleared Trap

1.3.6.1.4.1.6527.3.1.3.61.0.8

   

tmnx Vdo Client Sessions Lmt Cleared Trap

tmnx Vdo Client Sessions Lmt Cleared Trap

vrrp Trap New Master Trap

1.3.6.1.2.1.68.0.1

   

vrrp Trap New Master Trap

vrrp Trap New Master Trap

vrrp Trap Auth Failure Trap

1.3.6.1.2.1.68.0.2

   

vrrp Trap Auth Failure Trap

vrrp Trap Auth Failure Trap

tmnx Vrrp Bfd Intf Sess State Chgd Trap

1.3.6.1.4.1.6527.3.1.3.20.0.5

   

tmnx Vrrp Bfd Intf Sess State Chgd Trap

tmnx Vrrp Bfd Intf Sess State Chgd Trap

vrrp Trap Proto Error Trap

1.3.6.1.2.1.68.0.3

   

vrrp Trap Proto Error Trap

vrrp Trap Proto Error Trap

tVrrp Became Backup Trap

1.3.6.1.4.1.6527.3.1.3.20.0.6

   

tVrrp Became Backup Trap

tVrrp Became Backup Trap

tVrrp Trap New Master Trap

1.3.6.1.4.1.6527.3.1.3.20.0.7

   

tVrrp Trap New Master Trap

tVrrp Trap New Master Trap

tVrrp IP List Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.20.0.8

   

tVrrp IP List Mismatch Trap

tVrrp IP List Mismatch Trap

tVrrp IP List Mismatch Clear Trap

1.3.6.1.4.1.6527.3.1.3.20.0.9

   

tVrrp IP List Mismatch Clear Trap

tVrrp IP List Mismatch Clear Trap

tVrrp Multiple Owners Trap

1.3.6.1.4.1.6527.3.1.3.20.0.10

   

tVrrp Multiple Owners Trap

tVrrp Multiple Owners Trap

tVrrp Router Adv Not Activated Trap

1.3.6.1.4.1.6527.3.1.3.20.0.11

   

tVrrp Router Adv Not Activated Trap

tVrrp Router Adv Not Activated Trap

tVrrp Router Adv Not Activated Clear Trap

1.3.6.1.4.1.6527.3.1.3.20.0.12

   

tVrrp Router Adv Not Activated Clear Trap

tVrrp Router Adv Not Activated Clear Trap

destination Disabled Trap

1.3.6.1.4.1.6527.3.1.3.18.0.4

   

destination Disabled Trap

destination Disabled Trap

source Sap Change Trap

1.3.6.1.4.1.6527.3.1.3.18.0.8

   

source Sap Change Trap

source Sap Change Trap

source Subscriber Change Trap

1.3.6.1.4.1.6527.3.1.3.18.0.9

   

source Subscriber Change Trap

source Subscriber Change Trap

tMirror Source IP Fltr Change Reject Trap

1.3.6.1.4.1.6527.3.1.3.18.0.10

   

tMirror Source IP Fltr Change Reject Trap

tMirror Source IP Fltr Change Reject Trap

tMirror Source Mac Fltr Change Reject Trap

1.3.6.1.4.1.6527.3.1.3.18.0.12

   

tMirror Source Mac Fltr Change Reject Trap

tMirror Source Mac Fltr Change Reject Trap

tMirror Source Filter Assign Reject Trap

1.3.6.1.4.1.6527.3.1.3.18.0.13

   

tMirror Source Filter Assign Reject Trap

tMirror Source Filter Assign Reject Trap

tMirror Destination Change Reject Trap

1.3.6.1.4.1.6527.3.1.3.18.0.14

   

tMirror Destination Change Reject Trap

tMirror Destination Change Reject Trap

tMirror Source Filter Overruled Trap

1.3.6.1.4.1.6527.3.1.3.18.0.15

   

tMirror Source Filter Overruled Trap

tMirror Source Filter Overruled Trap

tMirror Source Filter Assign Warn Trap

1.3.6.1.4.1.6527.3.1.3.18.0.16

   

tMirror Source Filter Assign Warn Trap

tMirror Source Filter Assign Warn Trap

tMirror Filter Assign To Sap Warn Trap

1.3.6.1.4.1.6527.3.1.3.18.0.17

   

tMirror Filter Assign To Sap Warn Trap

tMirror Filter Assign To Sap Warn Trap

tMirror Filter Assign To Sdp Warn Trap

1.3.6.1.4.1.6527.3.1.3.18.0.18

   

tMirror Filter Assign To Sdp Warn Trap

tMirror Filter Assign To Sdp Warn Trap

tMirror Filter Assign To Itf Warn Trap

1.3.6.1.4.1.6527.3.1.3.18.0.19

   

tMirror Filter Assign To Itf Warn Trap

tMirror Filter Assign To Itf Warn Trap

lldp Rem Tables Change Trap

1.0.8802.1.1.2.0.0.1

   

lldp Rem Tables Change Trap

lldp Rem Tables Change Trap

tmnx Mc Path Src Grp Blk Hole Trap

1.3.6.1.4.1.6527.3.1.3.54.0.1

   

tmnx Mc Path Src Grp Blk Hole Trap

tmnx Mc Path Src Grp Blk Hole Trap

tmnx Mc Path Src Grp Blk Hole Clear Trap

1.3.6.1.4.1.6527.3.1.3.54.0.2

   

tmnx Mc Path Src Grp Blk Hole Clear Trap

tmnx Mc Path Src Grp Blk Hole Clear Trap

tmnx Mc Path Avail Bw Limit Reached Trap

1.3.6.1.4.1.6527.3.1.3.54.0.3

   

tmnx Mc Path Avail Bw Limit Reached Trap

tmnx Mc Path Avail Bw Limit Reached Trap

tmnx Mc Path Avail Bw Val Within Range Trap

1.3.6.1.4.1.6527.3.1.3.54.0.4

   

tmnx Mc Path Avail Bw Val Within Range Trap

tmnx Mc Path Avail Bw Val Within Range Trap

tmnx Mc Redundancy Peer State Changed Trap

1.3.6.1.4.1.6527.3.1.3.40.0.1

   

tmnx Mc Redundancy Peer State Changed Trap

tmnx Mc Redundancy Peer State Changed Trap

tmnx Mc Redundancy Mismatch Detected Trap

1.3.6.1.4.1.6527.3.1.3.40.0.2

   

tmnx Mc Redundancy Mismatch Detected Trap

tmnx Mc Redundancy Mismatch Detected Trap

tmnx Mc Redundancy Mismatch Resolved Trap

1.3.6.1.4.1.6527.3.1.3.40.0.3

   

tmnx Mc Redundancy Mismatch Resolved Trap

tmnx Mc Redundancy Mismatch Resolved Trap

tmnx Mc Peer Sync Status Changed Trap

1.3.6.1.4.1.6527.3.1.3.40.0.4

   

tmnx Mc Peer Sync Status Changed Trap

tmnx Mc Peer Sync Status Changed Trap

tmnx Mc Sync Client Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.40.0.5

   

tmnx Mc Sync Client Alarm Raised Trap

tmnx Mc Sync Client Alarm Raised Trap

tmnx Mc Sync Client Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.40.0.6

   

tmnx Mc Sync Client Alarm Cleared Trap

tmnx Mc Sync Client Alarm Cleared Trap

tmnx Srrp Subnet Mismatch Cleared Trap

1.3.6.1.4.1.6527.3.1.3.40.0.8

   

tmnx Srrp Subnet Mismatch Cleared Trap

tmnx Srrp Subnet Mismatch Cleared Trap

tmnx Srrp Instance Id Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.40.0.9

   

tmnx Srrp Instance Id Mismatch Trap

tmnx Srrp Instance Id Mismatch Trap

tmnx Srrp Sap Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.40.0.10

   

tmnx Srrp Sap Mismatch Trap

tmnx Srrp Sap Mismatch Trap

tmnx Srrp Sap Tag Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.40.0.11

   

tmnx Srrp Sap Tag Mismatch Trap

tmnx Srrp Sap Tag Mismatch Trap

tmnx Srrp Red If Mismatch Trap

1.3.6.1.4.1.6527.3.1.3.40.0.12

   

tmnx Srrp Red If Mismatch Trap

tmnx Srrp Red If Mismatch Trap

tmnxMcLagInfoLagChanged

1.3.6.1.4.1.6527.3.1.3.40.0.14

   

tmnxMcLagInfoLagChanged

tmnxMcLagInfoLagChanged

tmnx Srrp Dual Master Trap

1.3.6.1.4.1.6527.3.1.3.40.0.13

   

tmnx Srrp Dual Master Trap

tmnx Srrp Dual Master Trap

tmnx Srrp System Ip No tSet Trap

1.3.6.1.4.1.6527.3.1.3.40.0.15

   

tmnx Srrp System Ip No tSet Trap

tmnx Srrp System Ip No tSet Trap

tmnx Mc Ring Oper State Changed Trap

1.3.6.1.4.1.6527.3.1.3.40.0.16

   

tmnx Mc Ring Oper State Changed Trap

tmnx Mc Ring Oper State Changed Trap

tmnx Mc Ring Inb Ctrl Oper State Chgd Trap

1.3.6.1.4.1.6527.3.1.3.40.0.17

   

tmnx Mc Ring Inb Ctrl Oper State Chgd Trap

tmnx Mc Ring Inb Ctrl Oper State Chgd Trap

tmnx Mc Ring Node Loc Oper State Chgd Trap

1.3.6.1.4.1.6527.3.1.3.40.0.18

   

tmnx Mc Ring Node Loc Oper State Chgd Trap

tmnx Mc Ring Node Loc Oper State Chgd Trap

tmnx Mc Sync Clock Skew Raised Trap

1.3.6.1.4.1.6527.3.1.3.40.0.19

   

tmnx Mc Sync Clock Skew Raised Trap

tmnx Mc Sync Clock Skew Raised Trap

tmnx Mc Sync Clock Skew Cleared Trap

1.3.6.1.4.1.6527.3.1.3.40.0.20

   

tmnx Mc Sync Clock Skew Cleared Trap

tmnx Mc Sync Clock Skew Cleared Trap

tmnx Srrp Duplicate Sub If Address Trap

1.3.6.1.4.1.6527.3.1.3.40.0.21

   

tmnx Srrp Duplicate Sub If Address Trap

tmnx Srrp Duplicate Sub If Address Trap

tmnx Mc Peer Rings Oper State Changed Trap

1.3.6.1.4.1.6527.3.1.3.40.0.22

   

tmnx Mc Peer Rings Oper State Changed Trap

tmnx Mc Peer Rings Oper State Changed Trap

tmnx Srrp Trap New Master Trap

1.3.6.1.4.1.6527.3.1.3.40.0.23

   

tmnx Srrp Trap New Master Trap

tmnx Srrp Trap New Master Trap

tmnx Srrp Became Backup Trap

1.3.6.1.4.1.6527.3.1.3.40.0.24

   

tmnx Srrp Became Backup Trap

tmnx Srrp Became Backup Trap

tmnx Mc Peer EP Bfd Session Open Trap

1.3.6.1.4.1.6527.3.1.3.40.0.26

   

tmnx Mc Peer EP Bfd Session Open Trap

tmnx Mc Peer EP Bfd Session Open Trap

tmnx Mc Peer EP Bfd Session Close Trap

1.3.6.1.4.1.6527.3.1.3.40.0.27

   

tmnx Mc Peer EP Bfd Session Close Trap

tmnx Mc Peer EP Bfd Session Close Trap

tmnx Mc Peer EP Bfd Session Up Trap

1.3.6.1.4.1.6527.3.1.3.40.0.28

   

tmnx Mc Peer EP Bfd Session Up Trap

tmnx Mc Peer EP Bfd Session Up Trap

tmnx Srrp Bfd Intf Sess State Chgd Trap

1.3.6.1.4.1.6527.3.1.3.40.0.25

   

tmnx Srrp Bfd Intf Sess State Chgd Trap

tmnx Srrp Bfd Intf Sess State Chgd Trap

tmnx Mc Peer EP Bfd Session Down Trap

1.3.6.1.4.1.6527.3.1.3.40.0.29

   

tmnx Mc Peer EP Bfd Session Down Trap

tmnx Mc Peer EP Bfd Session Down Trap

tmnx Mc Peer EP Oper Down Trap

1.3.6.1.4.1.6527.3.1.3.40.0.30

   

tmnx Mc Peer EP Oper Down Trap

tmnx Mc Peer EP Oper Down Trap

tmnx Mc Peer EP Oper Up Trap

1.3.6.1.4.1.6527.3.1.3.40.0.31

   

tmnx Mc Peer EP Oper Up Trap

tmnx Mc Peer EP Oper Up Trap

tmnx MCEP Session Psv Mode Disabled Trap

1.3.6.1.4.1.6527.3.1.3.40.0.33

   

tmnx MCEP Session Psv Mode Disabled Trap

tmnx Mc Peer EP Oper Up Trap

tmnx MCEP Session Psv Mode Enabled Trap

1.3.6.1.4.1.6527.3.1.3.40.0.32

   

tmnx MCEP Session Psv Mode Enabled Trap

tmnx MCEP Session Psv Mode Enabled Trap

source Ip Filter Change Trap

1.3.6.1.4.1.6527.3.1.3.18.0.6

   

source Ip Filter Change Trap

source Ip Filter Change Trap

source Mac Filter Change Trap

1.3.6.1.4.1.6527.3.1.3.18.0.7

   

source Mac Filter Change Trap

source Mac Filter Change Trap

sap Mld Snpg Grp Limit Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.45.1.0.1

   

sap Mld Snpg Grp Limit Exceeded Trap

sap Mld Snpg Grp Limit Exceeded Trap

sdp Bnd Mld Snpg Grp Limit Exceeded Trap

1.3.6.1.4.1.6527.3.1.3.45.2.0.1

   

sdp Bnd Mld Snpg Grp Limit Exceeded Trap

sdp Bnd Mld Snpg Grp Limit Exceeded Trap

mpls XC Up Trap

1.3.6.1.2.1.10.166.2.0.1

   

mpls XC Up Trap

mpls XC Up Trap

mpls XC Down Trap

1.3.6.1.2.1.10.166.2.0.2

   

mpls XC Down Trap

mpls XC Down Trap

mpls Tunnel Up Trap

1.3.6.1.2.1.10.166.3.0.1

   

mpls Tunnel Up Trap

mpls Tunnel Up Trap

mpls Tunnel Down Trap

1.3.6.1.2.1.10.166.3.0.2

   

mpls Tunnel Down Trap

mpls Tunnel Down Trap

mpls Tunnel Rerouted Trap

1.3.6.1.2.1.10.166.3.0.3

   

mpls Tunnel Rerouted Trap

mpls Tunnel Rerouted Trap

mpls Tunnel Reoptimized Trap

1.3.6.1.2.1.10.166.3.0.4

   

mpls Tunnel Reoptimized Trap

mpls Tunnel Reoptimized Trap

sap Mld Snpg Mcs Failure Trap

1.3.6.1.4.1.6527.3.1.3.45.1.0.2

   

sap Mld Snpg Mcs Failure Trap

sap Mld Snpg Mcs Failure Trap

vRtr Mpls State Change Trap

1.3.6.1.4.1.6527.3.1.3.6.0.1

   

vRtr Mpls State Change Trap

vRtr Mpls State Change Trap

vRtr Mpls If State Change Trap

1.3.6.1.4.1.6527.3.1.3.6.0.2

   

vRtr Mpls If State Change Trap

vRtr Mpls If State Change Trap

vRtr Mpls Lsp Up Trap

1.3.6.1.4.1.6527.3.1.3.6.0.3

   

vRtr Mpls Lsp Up Trap

vRtr Mpls Lsp Up Trap

vRtr Mpls Lsp Down Trap

1.3.6.1.4.1.6527.3.1.3.6.0.4

   

vRtr Mpls Lsp Down Trap

vRtr Mpls Lsp Down Trap

vRtr Mpls Lsp Path Up Trap

1.3.6.1.4.1.6527.3.1.3.6.0.5

   

vRtr Mpls Lsp Path Up Trap

vRtr Mpls Lsp Path Up Trap

vRtr Mpls Lsp Path Down Trap

1.3.6.1.4.1.6527.3.1.3.6.0.6

   

vRtr Mpls Lsp Path Down Trap

vRtr Mpls Lsp Path Down Trap

vRtr Mpls Lsp Path Rerouted Trap

1.3.6.1.4.1.6527.3.1.3.6.0.7

   

vRtr Mpls Lsp Path Rerouted Trap

vRtr Mpls Lsp Path Rerouted Trap

vRtr Mpls Lsp Path Resignaled Trap

1.3.6.1.4.1.6527.3.1.3.6.0.8

   

vRtr Mpls Lsp Path Resignaled Trap

vRtr Mpls Lsp Path Resignaled Trap

vRtr Mpls P2mp Instance Up Trap

1.3.6.1.4.1.6527.3.1.3.6.0.9

   

vRtr Mpls P2mp Instance Up Trap

vRtr Mpls P2mp Instance Up Trap

vRtr Mpls P2mp Instance Down Trap

1.3.6.1.4.1.6527.3.1.3.6.0.10

   

vRtr Mpls P2mp Instance Down Trap

vRtr Mpls P2mp Instance Down Trap

vRtr Mpls S2l Sub Lsp Up Trap

1.3.6.1.4.1.6527.3.1.3.6.0.11

   

vRtr Mpls S2l Sub Lsp Up Trap

vRtr Mpls S2l Sub Lsp Up Trap

vRtr Mpls S2l Sub Lsp Down Trap

1.3.6.1.4.1.6527.3.1.3.6.0.12

   

vRtr Mpls S2l Sub Lsp Down Trap

vRtr Mpls S2l Sub Lsp Down Trap

vRtr Mpls S2l Sub Lsp Rerouted Trap

1.3.6.1.4.1.6527.3.1.3.6.0.13

   

vRtr Mpls S2l Sub Lsp Rerouted Trap

vRtr Mpls S2l Sub Lsp Rerouted Trap

vRtr Mpls S2l Sub Lsp Resignaled Trap

1.3.6.1.4.1.6527.3.1.3.6.0.14

   

vRtr Mpls S2l Sub Lsp Resignaled Trap

vRtr Mpls S2l Sub Lsp Resignaled Trap

vRtr Mpls Lsp Path Soft Preempted Trap

1.3.6.1.4.1.6527.3.1.3.6.0.15

   

vRtr Mpls Lsp Path Soft Preempted Trap

vRtr Mpls Lsp Path Soft Preempted Trap

vRtr Mpls Lsp Path Lst Fill Reopt Elig Trap

1.3.6.1.4.1.6527.3.1.3.6.0.16

   

vRtr Mpls Lsp Path Lst Fill Reopt Elig Trap

vRtr Mpls Lsp Path Lst Fill Reopt Elig Trap

vRtr Mpls P2 mp Instance Resignaled Trap

1.3.6.1.4.1.6527.3.1.3.6.0.17

   

vRtr Mpls P2 mp Instance Resignaled Trap

vRtr Mpls P2 mp Instance Resignaled Trap

vRtr Mpls Resignal Timer Expired Trap

1.3.6.1.4.1.6527.3.1.3.6.0.18

   

vRtr Mpls Resignal Timer Expired Trap

vRtr Mpls Resignal Timer Expired Trap

tmnx Oam Ping Probe Failed V3 Trap

1.3.6.1.4.1.6527.3.1.3.11.1.0.8

   

tmnx Oam Ping Probe Failed V3 Trap

tmnx Oam Ping Probe Failed V3 Trap

tmnx Oam Ping Test Failed V3 Trap

1.3.6.1.4.1.6527.3.1.3.11.1.0.9

   

tmnx Oam Ping Test Failed V3 Trap

tmnx Oam Ping Test Failed V3 Trap

tmnx Oam Ping Test Completed V3 Trap

1.3.6.1.4.1.6527.3.1.3.11.1.0.10

   

tmnx Oam Ping Test Completed V3 Trap

tmnx Oam Ping Test Completed V3 Trap

tmnx Ancp Loopback Test Completed Trap

1.3.6.1.4.1.6527.3.1.3.11.1.0.7

   

tmnx Ancp Loopback Test Completed Trap

tmnx Ancp Loopback Test Completed Trap

tmnx Oam Tr Path Change Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.1

   

tmnx Oam Tr Path Change Trap

tmnx Oam Tr Path Change Trap

tmnx Oam Tr Test Failed Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.2

   

tmnx Oam Tr Test Failed Trap

tmnx Oam Tr Test Failed Trap

tmnx Oam Tr Test Completed Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.3

   

tmnx Oam Tr Test Completed Trap

tmnx Oam Tr Test Completed Trap

tmnx Oam Ldp Ttrace Auto Disc State Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.4

   

tmnx Oam Ldp Ttrace Auto Disc State Trap

tmnx Oam Ldp Ttrace Auto Disc State Trap

tmnx Oam Ldp Ttrace Fec Probe State Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.5

   

tmnx Oam Ldp Ttrace Fec Probe State Trap

tmnx Oam Ldp Ttrace Fec Probe State Trap

tmnx Oam Ldp Ttrace Fec Dis Status Trap

1.3.6.1.4.1.6527.3.1.3.11.2.0.6

   

tmnx Oam Ldp Ttrace Fec Dis Status Trap

tmnx Oam Ldp Ttrace Fec Dis Status Trap

svc End Point Mac Limit Alarm Raised Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.18

   

svc End Point Mac Limit Alarm Raised Trap

svc End Point Mac Limit Alarm Raised Trap

svc End Point Mac Limit Alarm Cleared Trap

1.3.6.1.4.1.6527.3.1.3.4.2.0.19

   

svc End Point Mac Limit Alarm Cleared Trap

svc End Point Mac Limit Alarm Cleared Trap

topology Change Pip Major State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.39

   

topology Change Pip Major State Trap

topology Change Pip Major State Trap

topology Change Pip State Trap

1.3.6.1.4.1.6527.3.1.3.4.5.0.40

   

topology Change Pip State Trap

topology Change Pip State Trap

ds1 Loop back Start Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.24

   

ds1 Loop back Start Trap

ds1 Loop back Start Trap

ds1 Loop back Stop Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.25

   

ds1 Loop back Stop Trap

ds1 Loop back Stop Trap

ds3 Loop back Start Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.26

   

ds3 Loop back Start Trap

ds3 Loop back Start Trap

ds3 Loop back Stop Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.27

   

ds3 Loop back Stop Trap

ds3 Loop back Stop Trap

sdh Loop back Start Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.28

   

sdh Loop back Start Trap

sdh Loop back Start Trap

sdh Loop back Stop Trap

1.3.6.1.4.1.6527.3.1.3.2.2.0.29

   

sdh Loop back Stop Trap

sdh Loop back Stop Trap


Alcatel-Lucent 7705 SAR V2 Traps

Table 11-5 lists the Alcatel-Lucent 7705 SAR V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-35.

Table 11-5 Alcatel-Lucent 7705 SAR V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

sbi-boot-config-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

   

completed the configuration phase following a system reboot

sbi boot config

sbi-boot-snmpd-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

   

completed the SNMP daemon initialization following a system reboot

sbi boot snmpd

ssi-saveconfig-failed-v2

1.3.6.1.4.1.6527.3.1.3.1.0.3

   

saving of configuration is stopped due to errors

ssi saveconfig failed

ssi-saveconfig-succeeded-v2

1.3.6.1.4.1.6527.3.1.3.1.0.2

   

saving of configuration finished without errors

ssi saveconfig succeeded

tmnx-config-create-v2

1.3.6.1.4.1.6527.3.1.3.1.0.9

   

new row entry is created in one of the MIB tables

tmnx config create

tmnx-config-delete-v2

1.3.6.1.4.1.6527.3.1.3.1.0.10

   

an existing row entry in one of the MIB tables is deleted

tmnx config delete

tmnx-config-modify-v2

1.3.6.1.4.1.6527.3.1.3.1.0.8

   

a configuration attribute associated with a row entry in a MIB table is modified

tmnx config modify

tmnx-env-temp-too-high-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

   

temperature sensor reading on an equipment object is greater than its configured threshold

tmnx env temp too high

tmnx-eq-fan-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.6

   

one of the fans in a fan tray has failed

tmnx eq fan failure

tmnx-eq-flash-disk-full-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.33

   

no space left on the compact flash

tmnx eq flash disk full

tmnx-eq-port-ds1-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.18

   

DS1 interface alarm condition is cleared

tmnx eq port ds1 alarm clear

tmnx-eq-port-ds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.17

   

DS1 interface alarm condition is detected

tmnx eq port ds1 alarm

tmnx-eq-port-ds3-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.16

   

DS3 interface alarm condition is cleared

tmnx eq port ds3 alarm clear

tmnx-eq-port-ds3-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.15

   

DS3 interface alarm condition is detected

tmnx eq port ds3 alarm

tmnx-eq-port-error-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.14

   

error listed in tmnxPortNotifyError is detected on the port

tmnx eq port error

tmnx-eq-port-ether-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.23

   

ethernet port alarm condition is cleared

tmnx eq port ether alarm clear

tmnx-eq-port-ether-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.22

   

ethernet port alarm condition is detected

tmnx eq port ether alarm

tmnx-eq-port-sfp-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.8

   

SFP is inserted in the port

tmnx eq port sfp inserted

tmnx-eq-port-sfp-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.9

   

SFP is removed from the port

tmnx eq port sfp removed

tmnx-eq-port-sonet-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.5

   

a SONET/SDH port alarm condition is cleared

tmnx eq port sonet alarm clear

tmnx-eq-port-sonet-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.4

   

a SONET/SDH port alarm condition is detected

tmnx eq port sonet alarm

tmnx-eq-power-supply-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.3

   

one of the chassis's power supplies fails

tmnx eq power supply failure

tmnx-eq-power-supply-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.4

   

one of the chassis's power supplies is inserted

tmnx eq power supply inserted

tmnx-eq-power-supply-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

   

one of the chassis's power supplies is removed

tmnx eq power supply removed

tmnx-state-change-v2

1.3.6.1.4.1.6527.3.1.3.1.0.11

   

there is a change in either the adminstrative or operational state of a MIB table entry

tmnx state change

cold-start-v2

1.3.6.1.6.3.1.1.5.1

   

MIB2 V2 cold start trap

Alcatel Cold start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

   

MIB2 V2 warm start trap

Alcatel Warm start trap

link-down-v2

1.3.6.1.6.3.1.1.5.3

   

MIB2 V2 link down

Alcatel Link down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

   

MIB2 V2 link up

Alcatel Link up trap

bgpEstablished

1.3.6.1.2.1.15.7.1

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Alcatel BGP established trap

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Alcatel BGP down trap

ospf-if-auth-failure

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

Alcatel OSPF if auth failure trap

ospf-if-config-error

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

Alcatel OSPF if config error trap

ospf-if-rx-bad-packet

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

Alcatel OSPF if rx bad packet trap

ospf-if-state-changed

1.3.6.1.2.1.14.16.2.16

   

ospf if state change trap

Alcatel OSPF if state change trap

tmnx-eq-card-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.7

   

one of the cards in a chassis has failed

tmnx eq card failure

tmnx-eq-card-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.9

   

card is removed from the chassis

tmnx eq card removed

tmnx-eq-card-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.8

   

card is inserted into the chassis

tmnx eq card inserted

tmnx-eq-wrong-card-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.10

   

wrong type of card is inserted into a slot of the chassis

tmnx eq wrong card

tmnx-red-primary-cpm-fail-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.21

   

the primary CPM fails

tmnx red primary cpm fail


Alcatel-Lucent 7750 SR V1 Traps

Table 11-6 lists the Alcatel-Lucent 7750 SR V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-36

Table 11-6 Alcatel-Lucent 7750 SR V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

hdsl2shdsl-perf-ses-thresh

6

4

1.3.6.1.2.1.10.48.0.4

   

hdsl2shdsl perf ses thresh trap

Alcatel Hdsl2shdsl perf ses thresh

DLSW-trap-circuit-down

6

 

1.3.6.1.2.1.46.1.0

   

alcatel DLSW trap circuit down trap

Alcatel DLSW circuit down trap

alcatel-dlsw-trap-tconn-down

6

 

1.3.6.1.2.1.46.1.0

   

alcatel DLSW trap tconn down trap

Alcatel DLSW tconn down trap

DLSW-trap-tconn-partner-reject

6

1

1.3.6.1.2.1.46.1.0.1

   

alcatel DLSW trap tconn partner reject trap

Alcatel DLSW tconn partner reject trap

DLSW-trap-tconn-prot-violation

6

2

1.3.6.1.2.1.46.1.0.2

   

alcatel DLSW trap tconn prot violation trap

Alcatel DLSW tconn prot violation trap

fr-dlci-status-change

6

1

1.3.6.1.2.1.10.32.2.1

   

Frame-Relay dlci status change trap

Alcatel frame relay dlci status trap

hdsl2shdsl-local-power-loss

6

16

1.3.6.1.2.1.10.48.0.16

   

hdsl2shdsl local power loss trap

Alcatel Hdslshdsl local power loss trap

hdsl2shdsl-loop-atten-crossing

6

1

1.3.6.1.2.1.10.48.0.1

   

hdsl2shdsl loop attend crossing trap

Alcatel Hdslshdsl loop atten crossing trap

hdsl2shdsl-loopback-failure

6

9

1.3.6.1.2.1.10.48.0.9

   

hdsl2shdsl loopback failure trap

Alcatel Hdslshdsl loopback failure trap

hdsl2shdsl-no-neighbor-present

6

15

1.3.6.1.2.1.10.48.0.15

   

hdsl2shdsl no neighbor present trap

Alcatel Hdslshdsl no neighbor present trap

hdsl2shdsl-perf-crc-anomalies-thresh

6

5

1.3.6.1.2.1.10.48.0.5

   

hdsl2shdsl perf crc anomalies thresh trap

Alcatel Hdslshdsl perf crc anomalies thresh trap

hdsl2shdsl-perf-es-thresh

6

3

1.3.6.1.2.1.10.48.0.3

   

hdsl2shdsl perf es thresh trap

Alcatel Hdslshdsl perf es thresh trap

hdsl2shdsl-perf-los-ws-thresh

6

6

1.3.6.1.2.1.10.48.0.6

   

hdsl2shdsl perf los ws thresh trap

Alcatel Hdslshdsl perf los ws thresh trap

hdsl2shdsl-perf-uas-thresh

6

7

1.3.6.1.2.1.10.48.0.7

   

hdsl2shdsl perf uas thresh trap

Alcatel Hdslshdsl perf uas thresh trap

hdsl2shdsl-power-back-off

6

10

1.3.6.1.2.1.10.48.0.10

   

hdsl2shdsl power back off trap

Alcatel Hdslshdsl power back off trap

hdsl2shdsl-protocol-init-failure

6

14

1.3.6.1.2.1.10.48.0.14

   

hdsl2shdsl protocol init failure trap

Alcatel Hdslshdsl protocol init failure trap

hdsl2shdsl-snr-margin-crossing

6

2

1.3.6.1.2.1.10.48.0.2

   

hdsl2shdsl snr margin crossing trap

Alcatel Hdslshdsl snr margin crossing trap

hdsl2shdsl-span-invalid-num-repeaters

6

8

1.3.6.1.2.1.10.48.0.8

   

hdsl2shdsl span invalid num repeaters trap

Alcatel Hdslshdsl span invalid num repeaters trap

hdsl2shdsl-config-init-failure

6

13

1.3.6.1.2.1.10.48.0.13

   

hdsl2shdsl config init failure trap

Alcatel Hdslshdsl config init failure trap

hdsl2shdsl-dc-continuity-fault

6

12

1.3.6.1.2.1.10.48.0.12

   

hdsl2shdsl dc continuity fault trap

Alcatel Hdslshdsl dc continuity fault trap

ent-config-change

6

1

1.3.6.1.2.1.47.2.0.1

   

ent config change trap

Alcatel Ent config change

new-root

6

1

1.3.6.1.2.1.17.0.1

   

new root trap

Alcatel New root

ospf-if-auth-failure

6

6

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

Alcatel OSPF if auth failure trap

ospf-if-config-error

6

4

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

Alcatel OSPF if config error trap

ospf-if-rx-bad-packet

6

8

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

Alcatel OSPF if rx bad packet trap

ospf-if-state-change

6

16

1.3.6.1.2.1.14.16.2.16

   

ospf if state change trap

Alcatel OSPF if state change trap

ospf-lsdb-approaching-overflow

6

16

1.3.6.1.2.1.14.16.2.15

   

ospf lsdb approaching overflow trap

Alcatel OSPF lsdb approaching overflow trap

ospf-lsdb-overflow

6

14

1.3.6.1.2.1.14.16.2.14

   

ospf lsdb overflow trap

Alcatel OSPF lsdb approaching overflow trap

ospf-max-age-lsa

6

13

1.3.6.1.2.1.14.16.2.13

   

ospf max age lsa trap

Alcatel OSPF max age lsa trap

ospf-nbr-state-change

6

2

1.3.6.1.2.1.14.16.2.2

   

ospf nbr state change trap

Alcatel OSPF nbr state change trap

ospf-originate-lsa

6

12

1.3.6.1.2.1.14.16.2.12

   

ospf originate lsa trap

Alcatel OSPF originate lsa trap

ospf-tx-retransmit

6

10

1.3.6.1.2.1.14.16.2.10

   

ospf tx retransmit trap

Alcatel OSPF tx retransmit trap

ospf-virt-if-auth-failure

6

7

1.3.6.1.2.1.14.16.2.7

   

ospf virt if auth failure trap

Alcatel OSPF virt if auth failure trap

ospf-virt-if-config-error

6

5

1.3.6.1.2.1.14.16.2.5

   

ospf virt if config error trap

Alcatel OSPF virt if config error trap

ospf-virt-if-rx-bad-packet

6

9

1.3.6.1.2.1.14.16.2.9

   

ospf virt if rx bad packet trap

Alcatel OSPF virt if rx bad packet trap

ospf-virt-if-state-change

6

1

1.3.6.1.2.1.14.16.2.1

   

ospf virt if state change trap

Alcatel OSPF virt if state change trap

ospf-virt-if-tx-retransmit

6

11

1.3.6.1.2.1.14.16.2.11

   

ospf virt if tx retransmit trap

Alcatel OSPF virt if tx retransmit trap

ospf-virt-nbr-state-change

6

3

1.3.6.1.2.1.14.16.2.3

   

ospf virt nbr state change trap

Alcatel OSPF virt nbr state change trap

tcp connection table

6

0

1.3.6.1.2.1.6.13.1

   

tcp connection table2 trap - DUMP

Alcatel TCP connection table trap

x25-reset

6

2

1.3.6.1.2.1.10.5.0.2

   

x25 reset trap

Alcatel X25 reset trap

x25-restart

6

2

1.3.6.1.2.1.10.5.0.2

   

x25 restart trap

Alcatel X25 restart trap

authentication-failure

4

0

1.3.6.1.4.1

   

MIB2 V1 authentication-failure trap

Alcatel Authentication failure trap


Alcatel-Lucent 7750 SR V2 Traps

Table 11-7 lists the Alcatel-Lucent 7750 SR V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-37.

Table 11-7 Alcatel-Lucent 7750 SR V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

sbi-boot-config-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

   

completed the configuration phase following a system reboot

sbi boot config

sbi-boot-snmpd-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

   

completed the SNMP daemon initialization following a system reboot

sbi boot snmpd

ssi-saveconfig-failed-v2

1.3.6.1.4.1.6527.3.1.3.1.0.3

   

saving of configuration is stopped due to errors

ssi saveconfig failed

ssi-saveconfig-succeeded-v2

1.3.6.1.4.1.6527.3.1.3.1.0.2

   

saving of configuration finished without errors

ssi saveconfig succeeded

tmnx-config-create-v2

1.3.6.1.4.1.6527.3.1.3.1.0.9

   

new row entry is created in one of the MIB tables

tmnx config create

tmnx-config-delete-v2

1.3.6.1.4.1.6527.3.1.3.1.0.10

   

an existing row entry in one of the MIB tables is deleted

tmnx config delete

tmnx-config-modify-v2

1.3.6.1.4.1.6527.3.1.3.1.0.8

   

a configuration attribute associated with a row entry in a MIB table is modified

tmnx config modify

tmnx-env-temp-too-high-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

   

temperature sensor reading on an equipment object is greater than its configured threshold

tmnx env temp too high

tmnx-eq-fan-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.6

   

one of the fans in a fan tray has failed

tmnx eq fan failure

tmnx-eq-flash-disk-full-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.33

   

no space left on the compact flash

tmnx eq flash disk full

tmnx-eq-port-ds1-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.18

   

DS1 interface alarm condition is cleared

tmnx eq port ds1 alarm clear

tmnx-eq-port-ds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.17

   

DS1 interface alarm condition is detected

tmnx eq port ds1 alarm

tmnx-eq-port-ds3-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.16

   

DS3 interface alarm condition is cleared

tmnx eq port ds3 alarm clear

tmnx-eq-port-ds3-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.15

   

DS3 interface alarm condition is detected

tmnx eq port ds3 alarm

tmnx-eq-port-error-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.14

   

error listed in tmnxPortNotifyError is detected on the port

tmnx eq port error

tmnx-eq-port-ether-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.23

   

ethernet port alarm condition is cleared

tmnx eq port ether alarm clear

tmnx-eq-port-ether-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.22

   

ethernet port alarm condition is detected

tmnx eq port ether alarm

tmnx-eq-port-sfp-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.8

   

SFP is inserted in the port

tmnx eq port sfp inserted

tmnx-eq-port-sfp-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.9

   

SFP is removed from the port

tmnx eq port sfp removed

tmnx-eq-port-sonet-alarm-clear-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.5

   

a SONET/SDH port alarm condition is cleared

tmnx eq port sonet alarm clear

tmnx-eq-port-sonet-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.4

   

a SONET/SDH port alarm condition is detected

tmnx eq port sonet alarm

tmnx-eq-power-supply-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.3

   

one of the chassis's power supplies fails

tmnx eq power supply failure

tmnx-eq-power-supply-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.4

   

one of the chassis's power supplies is inserted

tmnx eq power supply inserted

tmnx-eq-power-supply-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

   

one of the chassis's power supplies is removed

tmnx eq power supply removed

tmnx-state-change-v2

1.3.6.1.4.1.6527.3.1.3.1.0.11

   

there is a change in either the adminstrative or operational state of a MIB table entry

tmnx state change

cold start trap

1.3.6.1.6.3.1.1.5.1

   

MIB2 V2 cold start trap

Alcatel Cold start trap

warm start trap

1.3.6.1.6.3.1.1.5.2

   

MIB2 V2 warm start trap

Alcatel Warm start trap

link down trap

1.3.6.1.6.3.1.1.5.3

   

MIB2 V2 link down

Alcatel Link down trap

link Up trap

1.3.6.1.6.3.1.1.5.4

   

MIB2 V2 link up

Alcatel Link up trap

bgpEstablished

1.3.6.1.2.1.15.7.1

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Alcatel BGP established trap

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Alcatel BGP down trap

ospf-if-auth-failure

1.3.6.1.2.1.14.16.2.6

   

ospf if auth failure trap

Alcatel OSPF if auth failure trap

ospf-if-config-error

1.3.6.1.2.1.14.16.2.4

   

ospf if config error trap

Alcatel OSPF if config error trap

ospf-if-rx-bad-packet

1.3.6.1.2.1.14.16.2.8

   

ospf if rx bad packet trap

Alcatel OSPF if rx bad packet trap

ospf-if-state-changed

1.3.6.1.2.1.14.16.2.16

   

ospf if state changed

Alcatel OSPF if state change trap

tmnx-eq-card-failure-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.7

   

one of the cards in a chassis has failed

tmnx eq card failure

tmnx-eq-card-removed-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.9

   

card is removed from the chassis

tmnx eq card removed

tmnx-eq-card-inserted-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.8

   

card is inserted into the chassis

tmnx eq card inserted

tmnx-eq-wrong-card-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.10

   

wrong type of card is inserted into a slot of the chassis

tmnx eq wrong card

tmnx-red-primary-cpm-fail-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.21

   

the primary CPM fails

tmnx red primary cpm fail


DragonWave Horizon Compact Series V2 Traps

Table 11-8 lists the DragonWave Horizon Compact Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-38

.

Table 11-8 DragonWave Horizon Compact Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

hzOdu Cold Start Trap

1.3.6.1.4.1.7262.2.2.21.0

NA

NA

DragonWave Cold Start

DragonWave Cold Start

hzOdu Link Down Trap

1.3.6.1.4.1.7262.2.2.21.1

1.3.6.1.2.1.2.2.1.1

1

DragonWave Link Down

DragonWave Link Down

hzOdu Link Up Trap

1.3.6.1.4.1.7262.2.2.21.2

1.3.6.1.2.1.2.2.1.1

1

DragonWave Link Up

DragonWave Link Up

hzOdu Sntp Servers Unreachable Trap

1.3.6.1.4.1.7262.2.2.21.11

NA

NA

SNTP Servers Unreachable

SNTP Servers Unreachable

hzOdu Sntp Servers Unreachable Cleared Trap

1.3.6.1.4.1.7262.2.2.21.12

NA

NA

SNTP Servers Unreachable Cleared

SNTP Servers Unreachable Cleared

hzOdu EnetPort1 Dropped Frames Threshold Exceeded Trap

1.3.6.1.4.1.7262.2.2.21.14

NA

NA

Dropped Frames Threshold Exceeded

Dropped Frames Threshold Exceeded

hzOdu EnetPort1 Dropped Frames Threshold Exceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.15

NA

NA

Dropped Frames Threshold Exceeded Cleared

Dropped Frames Threshold Exceeded Cleared

hzOdu Modem1 Rx LossOfSignal Trap

1.3.6.1.4.1.7262.2.2.21.22

NA

NA

Modem Rx LOS Lock

Modem Rx LOS Lock

hzOdu Modem1 Rx LossOfSignal Cleared Trap

1.3.6.1.4.1.7262.2.2.21.23

NA

NA

Modem Rx LOS Lock Cleared

Modem Rx LOS Lock Cleared

hzOdu Modem1 Snr Below Threshold Trap

1.3.6.1.4.1.7262.2.2.21.26

NA

NA

Modem SNR Below Threshold

Modem SNR Below Threshold

hzOdu Modem1 Snr Below Threshold Cleared Trap

1.3.6.1.4.1.7262.2.2.21.27

NA

NA

Modem SNR Below Threshold Cleared

Modem SNR Below Threshold Cleared

hzOdu Modem1 Equalizer Stress Exceed Threshold Trap

1.3.6.1.4.1.7262.2.2.21.28

NA

NA

Modem Equalizer Stress Exceed Threshold

Modem Equalizer Stress Exceed Threshold

hzOdu Modem1 Equalizer Stress Exceed Threshold Cleared Trap

1.3.6.1.4.1.7262.2.2.21.29

NA

NA

Modem Equalizer Stress Exceed Threshold Cleared

Modem Equalizer Stress Exceed Threshold Cleared

hzOdu Modem1 Channelized Rsl Below Threshold Trap

1.3.6.1.4.1.7262.2.2.21.30

NA

NA

Channelized RSL Below Threshold

Channelized RSL Below Threshold

hzOdu Modem1 Channelized Rsl Below Threshold Trap Cleared

1.3.6.1.4.1.7262.2.2.21.31

NA

NA

Channelized RSL Below Threshold Cleared

Channelized RSL Below Threshold Cleared

hzOdu Modem1 Hardware Fault Trap

1.3.6.1.4.1.7262.2.2.21.32

NA

NA

Modem Hardware Fault

Modem Hardware Fault

hzOdu Modem1 Hardware Fault Cleared Trap

1.3.6.1.4.1.7262.2.2.21.33

NA

NA

Modem Hardware Fault Cleared

Modem Hardware Fault Cleared

hzOdu Tty Session Commenced

1.3.6.1.4.1.7262.2.2.21.46

NA

NA

User Session Commenced

User Session Commenced

hzOdu Tty Session Terminated

1.3.6.1.4.1.7262.2.2.21.47

NA

NA

User Session Terminated

User Session Terminated

hzOdu Partner Redundancy Mode Mismatch

1.3.6.1.4.1.7262.2.2.21.50

NA

NA

Partner Redundancy Mode Mismatch

Partner Redundancy Mode Mismatch

hzOdu Partner Redundancy Mode Mismatch Cleared

1.3.6.1.4.1.7262.2.2.21.51

NA

NA

Partner Redundancy Mode Mismatch Cleared

Partner Redundancy Mode Mismatch Cleared

hzOdu Partner Configuration Mismatch Trap

1.3.6.1.4.1.7262.2.2.21.52

NA

NA

Partner Configuration Mismatch

Partner Configuration Mismatch

hzOdu Partner Configuration Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.2.21.53

NA

NA

Partner Configuration Mismatch Cleared

Partner Configuration Mismatch Cleared

hzOdu Hsb Active On Secondary Trap

1.3.6.1.4.1.7262.2.2.21.54

NA

NA

HSB Active On Secondary

HSB Active On Secondary

hzOdu Hsb Active On Secondary Cleared Trap

1.3.6.1.4.1.7262.2.2.21.55

NA

NA

HSB Active On Secondary Cleared

HSB Active On Secondary Cleared

hzOdu Hsb Override By User Trap

1.3.6.1.4.1.7262.2.2.21.56

NA

NA

HSB Override By User

HSB Override By User

hzOdu Hsb Override By User Cleared Trap

1.3.6.1.4.1.7262.2.2.21.57

NA

NA

HSB Override By User Cleared

HSB Override By User Cleared

hzOdu Hsb CrossLink Trap

1.3.6.1.4.1.7262.2.2.21.58

NA

NA

HSB Cross Link

HSB Cross Link

hzOdu Hsb CrossLink Cleared Trap

1.3.6.1.4.1.7262.2.2.21.59

NA

NA

HSB Cross Link Cleared

HSB Cross Link Cleared

hzOdu Hsb Active OnPrimary Trap

1.3.6.1.4.1.7262.2.2.21.60

NA

NA

HSB Active On Primary

HSB Active On Primary

hzOdu Hsb Active OnPrimary Cleared Trap

1.3.6.1.4.1.7262.2.2.21.61

NA

NA

HSB Active On Primary Cleared

HSB Active On Primary Cleared

hzOduEnetPort Queue1DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.62

NA

NA

Ethernet Port1 Queue1 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue1 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue1DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.63

NA

NA

Ethernet Port1 Queue1 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue1 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue2DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.64

NA

NA

Ethernet Port1 Queue2 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue2 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue2DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.65

NA

NA

Ethernet Port1 Queue2 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue2 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue3DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.66

NA

NA

Ethernet Port1 Queue3 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue3 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue3DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.67

NA

NA

Ethernet Port1 Queue3 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue3 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue4DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.68

NA

NA

Ethernet Port1 Queue4 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue4 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue4DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.69

NA

NA

Ethernet Port1 Queue4 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue4 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue5DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.70

NA

NA

Ethernet Port1 Queue5 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue5 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue5DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.71

NA

NA

Ethernet Port1 Queue5 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue5 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue6DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.72

NA

NA

Ethernet Port1 Queue6 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue6 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue6DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.73

NA

NA

Ethernet Port1 Queue6 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue6 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue7DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.74

NA

NA

Ethernet Port1 Queue7 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue7 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue7DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.75

NA

NA

Ethernet Port1 Queue7 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue7 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue8DroppedFramesThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.76

NA

NA

Ethernet Port1 Queue8 Dropped Frames Threshold Exceeded

Ethernet Port1 Queue8 Dropped Frames Threshold Exceeded

hzOduEnetPort1Queue8DroppedFramesThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.77

NA

NA

Ethernet Port1 Queue8 Dropped Frames Threshold Exceeded Cleared

Ethernet Port1 Queue8 Dropped Frames Threshold Exceeded Cleared

hzOduEnetPort1Queue1DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.78

NA

NA

Ethernet Port1 Queue1 Depth Threshold Exceeded

Ethernet Port1 Queue1 Depth Threshold Exceeded

hzOduEnetPort1Queue1DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.79

NA

NA

Ethernet Port1 Queue1 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue1 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue2DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.80

NA

NA

Ethernet Port1 Queue2 Depth Threshold Exceeded

Ethernet Port1 Queue2 Depth Threshold Exceeded

hzOduEnetPort1Queue2DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.81

NA

NA

Ethernet Port1 Queue2 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue2 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue3DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.82

NA

NA

Ethernet Port1 Queue3 Depth Threshold Exceeded

Ethernet Port1 Queue3 Depth Threshold Exceeded

hzOduEnetPort1Queue3DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.83

NA

NA

Ethernet Port1 Queue3 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue3 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue4DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.84

NA

NA

Ethernet Port1 Queue4 Depth Threshold Exceeded

Ethernet Port1 Queue4 Depth Threshold Exceeded

hzOduEnetPort1Queue4DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.85

NA

NA

Ethernet Port1 Queue4 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue4 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue5DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.86

NA

NA

Ethernet Port1 Queue5 Depth Threshold Exceeded

Ethernet Port1 Queue5 Depth Threshold Exceeded

hzOduEnetPort1Queue5DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.87

NA

NA

Ethernet Port1 Queue5 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue5 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue6DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.88

NA

NA

Ethernet Port1 Queue6 Depth Threshold Exceeded

Ethernet Port1 Queue6 Depth Threshold Exceeded

hzOduEnetPort1Queue6DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.89

NA

NA

Ethernet Port1 Queue6 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue6 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue7DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.90

NA

NA

Ethernet Port1 Queue7 Depth Threshold Exceeded

Ethernet Port1 Queue7 Depth Threshold Exceeded

hzOduEnetPort1Queue7DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.91

NA

NA

Ethernet Port1 Queue7 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue7 Depth Threshold Exceeded Cleared

hzOduEnetPort1Queue8DepthThresholdExceeded Trap

1.3.6.1.4.1.7262.2.2.21.92

NA

NA

Ethernet Port1 Queue8 Depth Threshold Exceeded

Ethernet Port1 Queue8 Depth Threshold Exceeded

hzOduEnetPort1Queue8DepthThresholdExceeded Cleared Trap

1.3.6.1.4.1.7262.2.2.21.93

NA

NA

Ethernet Port1 Queue8 Depth Threshold Exceeded Cleared

Ethernet Port1 Queue8 Depth Threshold Exceeded Cleared

hzOdu Haam Config MisMatch Trap

1.3.6.1.4.1.7262.2.2.21.94

NA

NA

HAAM Configuration Mismatch

HAAM Configuration Mismatch

hzOdu Haam Config MisMatch Clear Trap

1.3.6.1.4.1.7262.2.2.21.95

NA

NA

HAAM Configuration Mismatch Cleared

HAAM Configuration Mismatch Cleared

hzOdu Haam OnLower Modulation Trap

1.3.6.1.4.1.7262.2.2.21.96

NA

NA

HAAM On Lower Modulation

HAAM On Lower Modulation

hzOdu Haam OnLower Modulation Cleared Trap

1.3.6.1.4.1.7262.2.2.21.97

NA

NA

HAAM On Lower Modulation Cleared

HAAM On Lower Modulation Cleared

hzOdu Haam Event Trap

1.3.6.1.4.1.7262.2.2.21.98

NA

NA

HAAM Event

HAAM Event

hzOdu Haam Event Cleared Trap

1.3.6.1.4.1.7262.2.2.21.99

NA

NA

HAAM Event Cleared

HAAM Event Cleared

hzOdu Atpc Config Mismatch Trap

1.3.6.1.4.1.7262.2.2.21.9

NA

NA

ATPC Config Mismatch

ATPC Config Mismatch

hzOdu Atpc Config Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.2.21.10

NA

NA

ATPC Config Mismatch Cleared

ATPC Config Mismatch Cleared


DragonWave Horizon Compact Plus Series V2 Traps

Table 11-9 lists the DragonWave Horizon Compact Plus Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-39

.

Table 11-9 DragonWave Horizon Compact Plus Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

hzCp Link Down Trap

1.3.6.1.4.1.7262.2.5.11.1

NA

NA

DragonWave Link Down

DragonWave Link Down

hzCp Link Up Trap

1.3.6.1.4.1.7262.2.5.11.2

NA

NA

DragonWave Link Up

DragonWave Link Up

hzCp Radio Drain Current Out Of Limit Trap

1.3.6.1.4.1.7262.2.5.11.43

NA

NA

Radio Drain Current

Radio Drain Current

hzCp Radio Drain Current Out Of Limit Cleared Trap

1.3.6.1.4.1.7262.2.5.11.44

NA

NA

Radio Drain Current Cleared

Radio Drain Current Cleared

hzCp Radio Power Amplifier Trap

1.3.6.1.4.1.7262.2.5.11.45

NA

NA

Radio Power Amp

Radio Power Amp

hzCp Radio Power Amplifier Cleared Trap

1.3.6.1.4.1.7262.2.5.11.46

NA

NA

Radio Power Amp Cleared

Radio Power Amp Cleared

hzCp Modem Rx Loss Of Signal Lock Trap

1.3.6.1.4.1.7262.2.5.11.31

NA

NA

Modem Rx LOS Lock

Modem Rx LOS Lock

hzCp Modem Rx Loss Of Signal Lock Cleared Trap

1.3.6.1.4.1.7262.2.5.11.32

NA

NA

Modem Rx LOS Lock Cleared

Modem Rx LOS Lock Cleared

hzCp Modem Snr Below Threshold Trap

1.3.6.1.4.1.7262.2.5.11.33

NA

NA

Modem SNR Below Threshold

Modem SNR Below Threshold

hzCp Modem Snr Below Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.34

NA

NA

Modem SNR Below Threshold Cleared

Modem SNR Below Threshold Cleared

hzCp Modem Equalizer Stress Threshold Trap

1.3.6.1.4.1.7262.2.5.11.35

NA

NA

Modem Equalizer Stress Exceed Threshold

Modem Equalizer Stress Exceed Threshold

hzCp Modem Equalizer Stress Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.36

NA

NA

Modem Equalizer Stress Exceed Threshold Cleared

Modem Equalizer Stress Exceed Threshold Cleared

hzCp Rsl Below Threshold Trap

1.3.6.1.4.1.7262.2.5.11.37

NA

NA

Channelized RSL Below Threshold

Channelized RSL Below Threshold

hzCp Rsl Below Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.38

NA

NA

Channelized RSL Below Threshold Cleared

Channelized RSL Below Threshold Cleared

hzCp No Sntp Servers Reachable Trap

1.3.6.1.4.1.7262.2.5.11.14

NA

NA

SNTP Servers Unreachable

SNTP Servers Unreachable

hzCp No Sntp Servers Reachable Cleared Trap

1.3.6.1.4.1.7262.2.5.11.15

NA

NA

SNTP Servers Unreachable Cleared

SNTP Servers Unreachable Cleared

hzCp User Session Trap

1.3.6.1.4.1.7262.2.5.11.73

NA

NA

User Session Commenced

User Session Commenced

hzCp User Session Cleared Trap

1.3.6.1.4.1.7262.2.5.11.74

NA

NA

User Session Terminated

User Session Terminated

hzCp Hitless Aam Config MisMatch Trap

1.3.6.1.4.1.7262.2.5.11.5

NA

NA

HAAM Configuration Mismatch

HAAM Configuration Mismatch

hzCp Hitless Aam Config MisMatch Cleared Trap

1.3.6.1.4.1.7262.2.5.11.6

NA

NA

HAAM Configuration Mismatch Cleared

HAAM Configuration Mismatch Cleared

hzCp Hitless Aam Modulation Lowered Trap

1.3.6.1.4.1.7262.2.5.11.7

NA

NA

HAAM On Lower Modulation

HAAM On Lower Modulation

hzCp Hitless Aam Modulation Lowered Cleared Trap

1.3.6.1.4.1.7262.2.5.11.8

NA

NA

HAAM On Lower Modulation Cleared

HAAM On Lower Modulation Cleared

hzCp Atpc Config Mismatch Trap

1.3.6.1.4.1.7262.2.5.11.10

NA

NA

ATPC Config Mismatch

ATPC Config Mismatch

hzCp Atpc Config Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.5.11.11

NA

NA

ATPC Config Mismatch Cleared

ATPC Config Mismatch Cleared

hzCp Bw Utilization Threshold Trap

1.3.6.1.4.1.7262.2.5.11.21

NA

NA

BW Utilization Threshold Exceeded

BW Utilization Threshold Exceeded

hzCp Bw Utilization Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.22

NA

NA

BW Utilization Threshold Exceeded Cleared

BW Utilization Threshold Exceeded Cleared

hzCp Aggregate Dropped Frames Threshold Trap

1.3.6.1.4.1.7262.2.5.11.17

NA

NA

Aggregate Dropped Frames Threshold

Aggregate Dropped Frames Threshold

hzCp Aggregate Dropped Frames Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.18

NA

NA

Aggregate Dropped Frames Threshold Cleared

Aggregate Dropped Frames Threshold Cleared

hzCp Ethernet Speed Reduced Trap

1.3.6.1.4.1.7262.2.5.11.67

NA

NA

Ethernet Speed Reduced

Ethernet Speed Reduced

hzCp Ethernet Speed Reduced Cleared Trap

1.3.6.1.4.1.7262.2.5.11.68

NA

NA

Ethernet Speed Reduced Cleared

Ethernet Speed Reduced Cleared

hzCp Temperature Out Of Limit Trap

1.3.6.1.4.1.7262.2.5.11.47

NA

NA

Radio Temperature Out Of Limit

Radio Temperature Out Of Limit

hzCp Temperature Out Of Limit Cleared Trap

1.3.6.1.4.1.7262.2.5.11.48

NA

NA

Radio Temperature Out Of Limit Cleared

Radio Temperature Out Of Limit Cleared

hzCp Queue Dropped Frames Threshold Trap

1.3.6.1.4.1.7262.2.5.11.19

NA

NA

Ethernet Queue Dropped Frames Threshold

Ethernet Queue Dropped Frames Threshold

hzCp Queue Dropped Frames Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.20

NA

NA

Ethernet Queue Dropped Frames Threshold Cleared

Ethernet Queue Dropped Frames Threshold Cleared

hzCp Redundancy Partner Config Mismatch Trap

1.3.6.1.4.1.7262.2.5.11.49

NA

NA

Redundancy Partner Config Mismatch

Redundancy Partner Config Mismatch

hzCp Redundancy Partner Config Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.5.11.50

NA

NA

Redundancy Partner Config Mismatch Cleared

Redundancy Partner Config Mismatch Cleared

hzCp Redundancy Active On Secondary Trap

1.3.6.1.4.1.7262.2.5.11.51

NA

NA

Redundancy Active On Secondary

Redundancy Active On Secondary

hzCp Redundancy Active On Secondary Cleared Trap

1.3.6.1.4.1.7262.2.5.11.52

NA

NA

Redundancy Active On Secondary Cleared

Redundancy Active On Secondary Cleared

hzCp Redundancy Operating In Forced Switch Trap

1.3.6.1.4.1.7262.2.5.11.53

NA

NA

Redundancy Operating In Forced Switch

Redundancy Operating In Forced Switch

hzCp Redundancy Operating In Forced Switch Cleared Trap

1.3.6.1.4.1.7262.2.5.11.54

NA

NA

Redundancy Operating In Forced Switch Cleared

Redundancy Operating In Forced Switch Cleared

hzCp Redundancy Enet Cross Link Trap

1.3.6.1.4.1.7262.2.5.11.55

NA

NA

Redundancy Enet Cross Link

Redundancy Enet Cross Link

hzCp Redundancy Enet Cross Link Cleared Trap

1.3.6.1.4.1.7262.2.5.11.56

NA

NA

Redundancy Enet Cross Link Cleared

Redundancy Enet Cross Link Cleared

hzCp Redundancy Active Using Partner WLink Trap

1.3.6.1.4.1.7262.2.5.11.57

NA

NA

Redundancy Active Using Partner WirelessLink

Redundancy Active Using Partner WirelessLink

hzCp Redundancy Active Using Partner Wlink Cleared Trap

1.3.6.1.4.1.7262.2.5.11.58

NA

NA

Redundancy Active Using Partner WirelessLink Cleared

Redundancy Active Using Partner WirelessLink Cleared

hzCp Redundancy Standby Wlink In Use Trap

1.3.6.1.4.1.7262.2.5.11.59

NA

NA

Redundancy Standby WirelessLink In Use

Redundancy Standby WirelessLink In Use

hzCp Redundancy Standby Wlink In Use Cleared Trap

1.3.6.1.4.1.7262.2.5.11.60

NA

NA

Redundancy Standby WirelessLink In Use Cleared

Redundancy Standby WirelessLink In Use Cleared

hzCp Redundancy Standby On Primary Trap

1.3.6.1.4.1.7262.2.5.11.61

NA

NA

Redundancy Standby On Primary

Redundancy Standby On Primary

hzCp Redundancy Standby On Primary Cleared Trap

1.3.6.1.4.1.7262.2.5.11.62

NA

NA

Redundancy Standby On Primary Cleared

Redundancy Standby On Primary Cleared

hzCpX2 Delivering Half Capacity Trap

1.3.6.1.4.1.7262.2.5.11.63

NA

NA

X2 Delivering Half Capacity

X2 Delivering Half Capacity

hzCpX2 Delivering Half Capacity Cleared Trap

1.3.6.1.4.1.7262.2.5.11.64

NA

NA

X2 Delivering Half Capacity Cleared

X2 Delivering Half Capacity Cleared

hzCp Bnc Cable Signal Not Detected Trap

1.3.6.1.4.1.7262.2.5.11.65

NA

NA

BNC Cable Signal Not Detected

BNC Cable Signal Not Detected

hzCp Bnc Cable Signal Not Detected Cleared Trap

1.3.6.1.4.1.7262.2.5.11.66

NA

NA

BNC Cable Signal Not Detected Cleared

BNC Cable Signal Not Detected Cleared

hzCp Queue Depth Threshold Trap

1.3.6.1.4.1.7262.2.5.11.23

NA

NA

Queue Depth Threshold

Queue Depth Threshold

hzCp Queue Depth Threshold Cleared Trap

1.3.6.1.4.1.7262.2.5.11.24

NA

NA

Queue Depth Threshold Cleared

Queue Depth Threshold Cleared

hzCp Hitless Aam Modulation Changed Event Trap

1.3.6.1.4.1.7262.2.5.11.9

NA

NA

HAAM Modulation Changed Event

HAAM Modulation Changed Event

hzCp Atpc Auto Disabled Trap

1.3.6.1.4.1.7262.2.5.11.12

NA

NA

ATPC Auto Disabled

ATPC Auto Disabled

hzCp Atpc Auto Disabled Cleared Trap

1.3.6.1.4.1.7262.2.5.11.13

NA

NA

ATPC Auto Disabled Cleared

ATPC Auto Disabled Cleared


DragonWave Horizon Quantum Series V2 Traps

Table 11-10 lists the DragonWave Horizon Quantum Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-40

.

Table 11-10 DragonWave Horizon Quantum Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

hzQtm Link Down Trap

1.3.6.1.4.1.7262.2.4.21.1

1.3.6.1.2.1.2.2.1.1

3

DragonWave Link Down

DragonWave Link Down

hzQtm Link Up Trap

1.3.6.1.4.1.7262.2.4.21.2

1.3.6.1.2.1.2.2.1.1

3

DragonWave Link Up

DragonWave Link Up

hzQtm Atpc Config Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.9

NA

NA

ATPC Config Mismatch

ATPC Config Mismatch

hzQtm Atpc Config Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.4.21.10

NA

NA

ATPC Config Mismatch Cleared

ATPC Config Mismatch Cleared

hzQtm Sntp Servers Unreachable Trap

1.3.6.1.4.1.7262.2.4.21.11

NA

NA

SNTP Servers Unreachable

SNTP Servers Unreachable

hzQtm Sntp Servers Unreachable Cleared Trap

1.3.6.1.4.1.7262.2.4.21.12

NA

NA

SNTP Servers Unreachable Cleared

SNTP Servers Unreachable Cleared

hzQtm Dropped Frames Threshold Exceeded Trap

1.3.6.1.4.1.7262.2.4.21.14

NA

NA

Dropped Frames Threshold Exceeded

Dropped Frames Threshold Exceeded

hzQtm Dropped Frames Threshold Exceeded Cleared Trap

1.3.6.1.4.1.7262.2.4.21.15

NA

NA

Dropped Frames Threshold Exceeded Cleared

Dropped Frames Threshold Exceeded Cleared

hzQtm Bw Utilization Threshold Exceeded Trap

1.3.6.1.4.1.7262.2.4.21.16

NA

NA

BW Utilization Threshold Exceeded

BW Utilization Threshold Exceeded

hzQtm Bw Utilization Threshold Exceeded Cleared Trap

1.3.6.1.4.1.7262.2.4.21.17

NA

NA

BW Utilization Threshold Exceeded Cleared

BW Utilization Threshold Exceeded Cleared

hzQtm Modem Rx LossOfSignal Lock Trap

1.3.6.1.4.1.7262.2.4.21.22

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

1

Modem Rx LOS Lock

Modem Rx LOS Lock

hzQtm Modem Rx LossOfSignal Lock Cleared Trap

1.3.6.1.4.1.7262.2.4.21.23

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

1

Modem Rx LOS Lock Cleared

Modem Rx LOS Lock Cleared

hzQtm Modem Snr Below Threshold Trap

1.3.6.1.4.1.7262.2.4.21.26

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

1

Modem SNR Below Threshold

Modem SNR Below Threshold

hzQtm Modem Snr Below Threshold Cleared Trap

1.3.6.1.4.1.7262.2.4.21.27

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

1

Modem SNR Below Threshold Cleared

Modem SNR Below Threshold Cleared

hzQtm Modem Equalizer Stress Exceed Threshold Trap

1.3.6.1.4.1.7262.2.4.21.28

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

2

Modem Equalizer Stress Exceed Threshold

Modem Equalizer Stress Exceed Threshold

hzQtm Modem Equalizer Stress Exceed Threshold Cleared Trap

1.3.6.1.4.1.7262.2.4.21.29

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

2

Modem Equalizer Stress Exceed Threshold Cleared

Modem Equalizer Stress Exceed Threshold Cleared

hzQtm Channelized Rsl Below Threshold Trap

1.3.6.1.4.1.7262.2.4.21.30

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

2

Channelized RSL Below Threshold

Channelized RSL Below Threshold

hzQtm Channelized Rsl Below Threshold Cleared Trap

1.3.6.1.4.1.7262.2.4.21.31

1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1

2

Channelized RSL Below Threshold Cleared

Channelized RSL Below Threshold Cleared

hzQtm User Session Commenced Trap

1.3.6.1.4.1.7262.2.4.21.34

NA

NA

User Session Commenced

User Session Commenced

hzQtm User Session Terminated Trap

1.3.6.1.4.1.7262.2.4.21.35

NA

NA

User Session Terminated

User Session Terminated

hzQtm Radio Synth Lost Lock Trap

1.3.6.1.4.1.7262.2.4.21.38

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Synth Lost Lock

Radio Synth Lost Lock

hzQtm Radio Synth Lost Lock Cleared Trap

1.3.6.1.4.1.7262.2.4.21.39

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Synth Lost Lock Cleared

Radio Synth Lost Lock Cleared

hzQtm Radio Lost Communication Trap

1.3.6.1.4.1.7262.2.4.21.40

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Lost Communication

Radio Lost Communication

hzQtm Radio Lost Communication Cleared Trap

1.3.6.1.4.1.7262.2.4.21.41

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Lost Communication Cleared

Radio Lost Communication Cleared

hzQtm Radio Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.42

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Radio Mismatch

Radio Mismatch

hzQtm Radio Mismatch Cleared

1.3.6.1.4.1.7262.2.4.21.43

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Radio Mismatch Cleared

Radio Mismatch Cleared

hzQtm Radio Power Amp Trap

1.3.6.1.4.1.7262.2.4.21.44

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Power Amp

Radio Power Amp

hzQtm Radio Power Amp Cleared Trap

1.3.6.1.4.1.7262.2.4.21.45

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Power Amp Cleared

Radio Power Amp Cleared

hzQtm Radio Excessive Tx CableLoss Trap

1.3.6.1.4.1.7262.2.4.21.46

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Excessive Tx Cable Loss

Radio Excessive Tx Cable Loss

hzQtm Radio Excessive Tx CableLoss Cleared Trap

1.3.6.1.4.1.7262.2.4.21.47

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Excessive Tx Cable Loss Cleared

Radio Excessive Tx Cable Loss Cleared

hzQtm HiPower Radio Tx Detector Trap

1.3.6.1.4.1.7262.2.4.21.48

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

High Power Radio Tx Detector

High Power Radio Tx Detector

hzQtm HiPower Radio Tx Detector Cleared Trap

1.3.6.1.4.1.7262.2.4.21.49

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

High Power Radio Tx Detector Cleared

High Power Radio Tx Detector Cleared

hzQtm Secondary Radio IsActive Trap

1.3.6.1.4.1.7262.2.4.21.50

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Secondary Radio Is Active

Secondary Radio Is Active

hzQtm Secondary Radio IsActive Cleared Trap

1.3.6.1.4.1.7262.2.4.21.51

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Secondary Radio Is Active Cleared

Secondary Radio Is Active Cleared

hzQtm Redundancy SerialNumber Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.52

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Redundancy Serial Number Mismatch

Redundancy Serial Number Mismatch

hzQtm Redundancy SerialNumber Mismatch Cleared Trap

1.3.6.1.4.1.7262.2.4.21.53

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Redundancy Serial Number Mismatch Cleared

Redundancy Serial Number Mismatch Cleared

hzQtm Secondary Radio NotDetected Trap

1.3.6.1.4.1.7262.2.4.21.56

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Secondary Radio Not Detected

Secondary Radio Not Detected

hzQtm Secondary Radio NotDetected Cleared Trap

1.3.6.1.4.1.7262.2.4.21.57

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Secondary Radio Not Detected Cleared

Secondary Radio Not Detected Cleared

hzQtm Primary Radio NotDetected Trap

1.3.6.1.4.1.7262.2.4.21.58

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Primary Radio Not Detected

Primary Radio Not Detected

hzQtm Primary Radio NotDetected Cleared Trap

1.3.6.1.4.1.7262.2.4.21.59

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Primary Radio Not Detected Cleared

Primary Radio Not Detected Cleared

hzQtm Faulty Primary Radio Trap

1.3.6.1.4.1.7262.2.4.21.60

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Primary Radio

Primary Radio

hzQtm Faulty Primary Radio Cleared Trap

1.3.6.1.4.1.7262.2.4.21.61

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Primary Radio Cleared

Primary Radio Cleared

hzQtm Excessive Rx CableLoss Trap

1.3.6.1.4.1.7262.2.4.21.64

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Excessive Rx Cable Loss

Excessive Rx Cable Loss

hzQtm Excessive Rx CableLoss Cleared Trap

1.3.6.1.4.1.7262.2.4.21.65

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

2

Excessive Rx Cable Loss Cleared

Excessive Rx Cable Loss Cleared

hzQtm Redundancy Secondary PortIsActive Trap

1.3.6.1.4.1.7262.2.4.21.68

NA

NA

Redundancy Secondary Port Is Active

Redundancy Secondary Port Is Active

hzQtm Redundancy Secondary PortIsActive Cleared Trap

1.3.6.1.4.1.7262.2.4.21.69

NA

NA

Redundancy Secondary Port Is Active Cleared

Redundancy Secondary Port Is Active Cleared

hzQtm Redundancy Primary PortFaulty Trap

1.3.6.1.4.1.7262.2.4.21.70

NA

NA

Redundancy Primary Port Faulty

Redundancy Primary Port Faulty

hzQtm Redundancy Primary PortFaulty Cleared Trap

1.3.6.1.4.1.7262.2.4.21.71

NA

NA

Redundancy Primary Port Faulty Cleared

Redundancy Primary Port Faulty Cleared

hzQtm Redundancy Secondary PortFaulty Trap

1.3.6.1.4.1.7262.2.4.21.72

NA

NA

Redundancy Secondary Port Faulty

Redundancy Secondary Port Faulty

hzQtm Redundancy Secondary PortFaulty Cleared Trap

1.3.6.1.4.1.7262.2.4.21.73

NA

NA

Redundancy Secondary Port Faulty Cleared

Redundancy Secondary Port Faulty Cleared

hzQtm Fan Failed Trap

1.3.6.1.4.1.7262.2.4.21.74

NA

NA

Fan Failed

Fan Failed

hzQtm Fan Failure Cleared Trap

1.3.6.1.4.1.7262.2.4.21.75

NA

NA

Fan Failed Cleared

Fan Failed Cleared

hzQtm Radio Unit Hw Changed Trap

1.3.6.1.4.1.7262.2.4.21.78

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Unit Hw Changed

Radio Unit Hw Changed

hzQtm Radio Drain Current Trap

1.3.6.1.4.1.7262.2.4.21.84

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Drain Current

Radio Drain Current

hzQtm Radio Drain Current Cleared Trap

1.3.6.1.4.1.7262.2.4.21.85

1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1

1

Radio Drain Current Cleared

Radio Drain Current Cleared

Cold start trap

1.3.6.1.6.3.1.1.5.1

NA

NA

DragonWave Cold Start

DragonWave Cold Start


Huawei S9300-Series V1 Traps

Table 11-11 lists the Huawei S9300-Series V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-41.

Table 11-11 Huawei S9300-Series V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

This type will handle all traps sent from SUN server (the OID is the SUN SNMP mib)

   

1.3.6.1.4.1.42

   

Dummy ticket on sun servers

dummy ticket trap

warmStart

2

0

1.3.6.1.6.3.1.1.5

   

A warmStart trap signifies that the SNMP entity,
supporting a notification originator application,
is reinitializing itself such that its configuration
is unaltered

huawei Warm start trap

MIB2 V1 link down

2

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. The Trap-PDU of type linkDown contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

huawei SNMP Link down

MIB2 V1 link up

3

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

huawei SNMP Link up

coldStart

0

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

huawei Cold start trap

bgpBackwardTransition

6

2

1.3.6.1.2.1.15.7

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

huawei BGP down trap

bgpEstablished

6

1

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

huawei BGP established trap

authenticationFailure

6

5

1.3.6.1.6.3.1.1.5

NA

NA

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

huawei SNMP authentication failure

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

huawei OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

huawei OSPF interface state changed to Up

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

huawei OSPF neighbor state down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

huawei OSPF neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

huawei OSPF interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

huawei OSPF interface authentication failure

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

huawei OSPF bad packet received

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

huawei OSPF packet retransmitted

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

huawei OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

huawei OSPF LSA aged to MaxAge


Huawei S9300-Series V2 Traps

Table 11-12 lists the Huawei S9300-Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-42.

Table 11-12 Huawei S9300-Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

huawei BGP down trap

bgpEstablished

1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

huawei BGP established trap

entConfigChange

1.3.6.1.2.1.47.2.0.1

NA

NA

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

huawei Entity table configuration changed

coldStart

1.3.6.1.6.3.1.1.5.1

NA

NA

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

huawei Cold start trap

warmStart

1.3.6.1.6.3.1.1.5.2

NA

NA

A warmStart trap signifies that the SNMP entity,
supporting a notification originator application,
is reinitializing itself such that its configuration
is unaltered

huawei Warm start trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

NA

NA

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

huawei SNMP authentication failure

linkDown

1.3.6.1.6.3.1.1.5.3

NA

NA

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

huawei SNMP Link down

linkUp

1.3.6.1.6.3.1.1.5.4

NA

NA

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

huawei SNMP Link up

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

huawei OSPF interface state changed to Down

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

huawei OSPF interface state changed to Up

ospfVirtIfStateChange

1.3.6.1.2.1.14.16.2.1

NA

NA

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

huawei OSPF virtual interface state changed to Down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

huawei OSPF neighbor state down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

huawei OSPF neighbor state up

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

huawei OSPF virtual neighbor state down

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

huawei OSPF virtual neighbor state up

ospfIfConfigError

1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

huawei OSPF interface configuration error

ospfVirtIfConfigError

1.3.6.1.2.1.14.16.2.5

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

huawei OSPF virtual interface configuration error

ospfIfAuthFailure

1.3.6.1.2.1.14.16.2.6

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

huawei OSPF interface authentication failure

ospfVirtIfAuthFailure

1.3.6.1.2.1.14.16.2.7

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

huawei OSPF virtual interface authentication failure

ospfIfRxBadPacket

1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

huawei OSPF bad packet received

ospfVirtIfRxBadPacket

1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

huawei OSPF bad packet received on virtual interface

ospfTxRetransmit

1.3.6.1.2.1.14.16.2.10

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

huawei OSPF packet retransmitted

ospfVirtIfTxRetransmit

1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

huawei OSPF packet retransmitted on virtual interface

ospfOriginateLsa

1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

huawei OSPF new LSA originated

ospfMaxAgeLsa

1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

huawei OSPF LSA aged to MaxAge

mplsL3VpnNumVrfRouteMaxThreshCleared

1.3.6.1.2.1.10.166.11.0.6

NA

NA

This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value.

huawei mpls l3 vpn numvrf routemax thresh cleared Trap

mplsL3VpnVrfDown

1.3.6.1.2.1.10.166.11.0.2

NA

NA

This notification is generated when:
a. One interface is associated with this VRF, and the ifOperStatus of this interface changes from up(1) to down(2).
b. Multiple interfaces are associated with this VRF, and the ifOperStatus of all except one of these interfaces is equal to up(1), and the ifOperStatus of that interface changes from up(1) to down(2).
c. The last interface with ifOperStatus equal to up(1) is disassociated from a VRF

huawei mpls l3 vpn vrf Down Trap

mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

1.3.6.1.2.1.10.166.11.0.4

NA

NA

This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold.

huawei mpls l3 vpn vrf numvrf routemax thresh exceeded Trap

mplsL3VpnVrfRouteMidThreshExceeded

1.3.6.1.2.1.10.166.11.0.3

NA

NA

This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold.

huawei mpls l3 vpn vrf routemid thresh exceeded Trap

mplsL3VpnVrfUp

1.3.6.1.2.1.10.166.11.0.1

NA

NA

This notification is generated when:
a. No interface is associated with this VRF, and the first (and only first) interface associated with it has its ifOperStatus change to up(1).
b. One interface is associated with this VRF, and the ifOperStatus of this interface changes to up(1).
c. Multiple interfaces are associated with this VRF, and the ifOperStatus of all interfaces is down(2), and the first of those interfaces has its ifOperStatus change to up(1).

huawei mpls l3 vpn vrf Up Trap

mplsTunnelRerouted

1.3.6.1.2.1.10.166.3.0.3

NA

NA

generated when a tunnel is rerouted. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

huawei MPLS-TE tunnel rerouted trap

mplsTunnelReoptimized

1.3.6.1.2.1.10.166.3.0.4

NA

NA

generated when a tunnel is reoptimized. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

huawei MPLS-TE tunnel reoptimized trap

mplsTunnelDown

1.3.6.1.2.1.10.166.3.0.2

NA

NA

generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus

huawei MPLS-TE tunnel down

mplsTunnelUp

1.3.6.1.2.1.10.166.3.0.1

NA

NA

generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus

huawei MPLS-TE tunnel up


Huawei CX600/ATN Series V1 Traps

Huawei CX600/ATN Series V1 traps supported in Prime Network is the same as the Huawei S9300-Series V1 traps. For more details on the Huawei S9300-Series V1 traps see Table 11-11.

Huawei CX600/ATN Series V2 Traps

Huawei CX600/ATN Series V2 traps supported in Prime Network is the same as the Huawei S9300-Series V2 traps. For more details on the Huawei S9300-Series V2 traps see Table 11-12

Juniper E-Series V1 Traps

Table 11-13 lists the Juniper E-Series V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-43.

Table 11-13 Juniper E-Series V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

bgpEstablished

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

bgpBackwardTransition

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

1

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap


Juniper E-Series V2 Traps

Table 11-14 lists the Juniper M-Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-44.

Table 11-14 Juniper E-Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

3

1.3.6.1.2.1.10.32.2.1.3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status change trap

frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

2

1.3.6.1.2.1.10.32.2.1.3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status up trap

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

NA

NA

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

.1.3.6.1.2.1.14.16.2.5

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

.1.3.6.1.2.1.14.16.2.6

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

.1.3.6.1.2.1.14.16.2.7

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfVirtIfTxRetransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

newRoot

1.3.6.1.2.1.17.0.1

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new root trap

topologyChange

1.3.6.1.2.1.17.0.2

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

coldStart

1.3.6.1.6.3.1.1.5.1

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Juniper SNMP authentication failure

ospfMaxAgeLsa

1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

ospfTxRetransmit

1.3.6.1.2.1.14.16.2.10

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfOriginateLsa

1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

entConfigChange

1.3.6.1.2.1.47.2.0.1

NA

NA

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Juniper Entity table configuration changed

ospfLsdbApproachingOverflow

1.3.6.1.2.1.14.16.2.15

NA

NA

ospf lsdb approaching overflow trap

Juniper OSPF lsdb approaching overflow trap

ospfLsdbOverflow

1.3.6.1.2.1.14.16.2.14

NA

NA

ospf lsdb overflow trap

Juniper OSPF lsdb overflow trap

warmStart

1.3.6.1.6.3.1.1.5.2

NA

NA

A warmStart trap signifies that the SNMP entity supporting a notification originator application, is reinitializing itself such that its configuration is unaltered

Juniper Warm start trap

linkDown

1.3.6.1.6.3.1.1.5.3

NA

NA

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper SNMP Link down

linkUp

1.3.6.1.6.3.1.1.5.4

NA

NA

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper SNMP Link up


Juniper M-Series V1 Traps

Table 11-15 lists the Juniper M-Series V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-45.

Table 11-15 Juniper M-Series V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

frDLCIStatusChange

6

1

1.3.6.1.2.1.10.32.0

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status invalid trap

frDLCIStatusChange

6

1

1.3.6.1.2.1.10.32.0

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status active trap

frDLCIStatusChange

6

1

1.3.6.1.2.1.10.32.0

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status inactive trap

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.9.1.7

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.9.1.7

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Up

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

6

2

 

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

6

5

1.3.6.1.2.1.14.16.2

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

6

7

1.3.6.1.2.1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

6

9

1.3.6.1.2.1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies that an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

6

11

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies that an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

bgpEstablished

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

bgpBackwardTransition

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

1

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

newRoot

6

1

1.3.6.1.2.1.17.0

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new stp root

topologyChange

6

2

1.3.6.1.2.1.17.0

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

entConfigChange

6

1

1.3.6.1.2.1.47.2.0

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.
If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away.
An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed

mplsLspUp

6

1

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathName.

Juniper mpls Lsp Up trap

mplsLspDown

6

2

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspDown trap signifies that the specified LSP is down, because the current active path mplsPathName went down.

Juniper mpls Lsp Down trap

mplsLspChange

6

3

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over

Juniper mpls Lsp Change trap

mplsLspPathDown

6

4

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down

Juniper mpls lsp path down trap

mplsLspPathUp

6

5

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up

Juniper mpls lsp path up trap

apsEventSwitchover

6

1

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventSwitchover notification is sent when the value of an instance of apsChanStatusSwitchovers increments.

Juniper aps event switch over trap

apsEventModeMismatch

6

2

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments.

Juniper aps event mode mismatch trap

apsEventChannelMismatch

6

3

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments.

Juniper aps event channel mismatch trap

apsEventPSBF

6

4

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventPSBF notification is sent when the value of an instance of apsStatusPSBFs increments.

Juniper aps event psbf trap

apsEventFEPLF

6

5

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments.

Juniper aps event feplf trap

jnxVpnIfUp

6

1

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.

Juniper VPN Interface Up

jnxVpnIfDown

6

2

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.

Juniper VPN Interface Down

jnxPowerSupplyFailure

6

1

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper power supply failure Trap

jnxPowerSupplyOK

6

1

1.3.6.1.4.1.2636.4.2

   

A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition.

Juniper power supply ok trap

jnxFanFailure

6

2

1.3.6.1.4.1.2636.4.1

   

A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition.

Juniper fan failure Trap

jnxFanOK

6

2

1.3.6.1.4.1.2636.4.2

   

A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition.

Juniper fan ok trap

jnxOverTemperature

6

3

1.3.6.1.4.1.2636.4.1

   

A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition.

Juniper over temperature Trap

jnxTemperatureOK

6

3

1.3.6.1.4.1.2636.4.2

   

A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition.

Juniper temperature ok trap

jnxRedundancySwitchover

6

4

1.3.6.1.4.1.2636.4.1

   

A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa.

Juniper redundancy switch over Trap

jnxFruRemoval

6

5

1.3.6.1.4.1.2636.4.1

   

A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis.

Juniper fru removal Trap

jnxFruInsertion

6

6

1.3.6.1.4.1.2636.4.1

   

A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis.

Juniper fru insertion Trap

jnxFruPowerOff

6

7

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper fru power off Trap

jnxFruPowerOn

6

8

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis.

Juniper fru power on Trap

jnxFruFailed

6

9

1.3.6.1.4.1.2636.4.1

   

This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due to some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced.

Juniper fru failed Trap

jnxFruOk

6

4

1.3.6.1.4.1.2636.4.2

   

A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis. A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.

juniper fru ok Trap

jnxFruOffline

6

10

1.3.6.1.4.1.2636.4.1

   

A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit)

Juniper fru offline Trap

jnxFruOnline

6

11

1.3.6.1.4.1.2636.4.1

   

A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis.

Juniper fru online Trap

jnxFruCheck

6

12

1.3.6.1.4.1.2636.4.1

   

A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis.

Juniper fru check Trap

jnxSpSvcSetZoneEntered

6

1

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service PIC has entered a more severe memory-usage zone from a less severe memory usage zone. The zone entered is identified by jnxSpSvcSetIfMemoryZone.

Juniper Sp svc set zone entered trap

jnxSpSvcSetZoneExited

6

2

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exited a more severe memory-usage zone to a less severe memory usage zone. The zone exited is identified by jnxSpSvcSetIfMemoryZone.

Juniper Sp svc set zone exited trap

jnxSpSvcSetCpuExceeded

6

3

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

Juniper Sp svc set cpu exceeded trap

jnxSpSvcSetCpuOk

6

4

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

Juniper Sp svc set cpu ok trap

jnxDfcSoftPpsThresholdExceeded

6

1

1.3.6.1.4.1.2636.4.11.0

   

Notification of input packet rate (in packet per second) going beyond the configured limit.

Juniper dfc soft pps threshold exceeded trap

jnxDfcSoftPpsUnderThreshold

6

2

1.3.6.1.4.1.2636.4.11.0

   

Notification of input packet rate (in packet per second) dropping back to below the configured limit.

Juniper dfc soft pps under threshold trap

jnxDfcHardPpsThresholdExceeded

6

3

1.3.6.1.4.1.2636.4.11.0

   

Notification of input packet rate (in packet per second) going beyond the recommended limit.

Juniper dfc hard pps threshold exceeded trap

jnxDfcHardPpsUnderThreshold

6

4

1.3.6.1.4.1.2636.4.11.0

   

Notification of input packet rate (in packet per second) dropping back to below the recommended limit.

Juniper dfc hard pps under threshold trap

jnxDfcSoftMemThresholdExceeded

6

5

1.3.6.1.4.1.2636.4.11.0

   

Notification of memory overload condition i.e memory usage is going beyond the configured limit.

Juniper dfc soft mem threshold exceeded trap

jnxDfcSoftMemUnderThreshold

6

6

1.3.6.1.4.1.2636.4.11.0

   

Notification of memory usage dropping back to below the configured limit.

Juniper dfc soft mem under threshold trap

jnxDfcHardMemThresholdExceeded

6

7

1.3.6.1.4.1.2636.4.11.0

   

Notification of memory overload condition i.e memory usage is going beyond the recommended limit.

Juniper dfc hard mem threshold exceeded trap

jnxDfcHardMemUnderThreshold

6

8

1.3.6.1.4.1.2636.4.11.0

   

Notification of memory usage dropping back to below the recommended limit.

Juniper dfc hard mem under threshold trap

jnxRmonAlarmGetFailure

6

1

1.3.6.1.4.1.2636.4.3.0

   

The SNMP trap that is generated when the get request for an alarm variable returns an error. The specific error is identified by jnxRmonAlarmGetFailReason.

Juniper Rmon alarm get failure trap

jnxRmonGetOk

6

2

1.3.6.1.4.1.2636.4.3.0

   

The SNMP trap that is generated when the get request for an alarm variable is successful. This is only sent after previous attempts were unsuccessful.

Juniper Rmon get ok trap

jnxLdpLspUp

6

1

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when an LSP comes up.

Juniper Ldp Lsp Up trap

jnxLdpLspDown

6

2

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the LSP goes down.

Juniper Ldp Lsp Down trap

jnxLdpSesUp

6

3

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' enters the `operational(5) state'.

Juniper ldp session up trap

jnxLdpSesDown

6

4

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' leaves the `operational(5) state'. The value of jnxLdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3).

Juniper ldp session down trap

jnxCmCfgChange

6

1

1.3.6.1.4.1.2636.4.5.0

   

Notification of a configuration management event as recorded in jnxCmCfgChgEventTable.

Juniper Cm cfg change trap

jnxCmRescueChange

6

2

1.3.6.1.4.1.2636.4.5.0

   

Notification of the latest rescue configuration change.

Juniper Cm rescue change trap

jnxSonetAlarmSet

6

1

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently set sonet/sdh alarm.

Juniper sonet alarm set trap

jnxSonetAlarmCleared

6

2

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently cleared sonet/sdh alarm.

Juniper sonet alarm cleared trap

jnxPMonOverloadSet

6

1

1.3.6.1.4.1.2636.4.7.0

   

Notification of a new overload condition on a Passive Monitoring interface.

Juniper PMon overload set trap

jnxPMonOverloadCleared

6

2

1.3.6.1.4.1.2636.4.7.0

   

Notification of a cleared overload condition on a Passive Monitoring interface.

Juniper PMon overload cleared trap

jnxCollUnavailableDest

6

1

1.3.6.1.4.1.2636.4.8.0

   

Notification of an unavailable destination failure encountered while transferring a collector file.

Juniper collector unavailable dest trap

jnxCollUnavailableDestCleared

6

2

1.3.6.1.4.1.2636.4.8.0

   

This indicates a previous unavailable destination failure has been resolved.

Juniper collector unavailable dest cleared trap

jnxCollUnsuccessfulTransfer

6

3

1.3.6.1.4.1.2636.4.8.0

   

This indicates an error was encountered while attempting a file transfer.

Juniper collector unsuccessful transfer trap

jnxCollFlowOverload

6

4

1.3.6.1.4.1.2636.4.8.0

   

This indicates a soft or hard flow overload condition has been triggered.

Juniper collector flow overload trap

jnxCollFlowOverloadCleared

6

5

1.3.6.1.4.1.2636.4.8.0

   

This indicates a soft or hard flow overload condition has been cleared.

Juniper collector flow overload cleared trap

jnxCollMemoryUnavailable

6

6

1.3.6.1.4.1.2636.4.8.0

   

This indicates a memory unavailable condition has been triggered.

Juniper collector memory unavailable trap

jnxCollMemoryAvailable

6

7

1.3.6.1.4.1.2636.4.8.0

   

This indicates a memory unavailable condition has been cleared.

Juniper collector memory available trap

jnxCollFtpSwitchover

6

8

1.3.6.1.4.1.2636.4.8.0

   

This indicates an FTP server switchover has occurred.

Juniper collector ftp switch over trap

jnxPingRttThresholdExceeded

6

1

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the round trip time (jnxPingCtlRttThreshold) exceeds the configured threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt threshold exceeded trap

jnxPingRttStdDevThresholdExceeded

6

2

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the round trip time (jnxPingResultsStdDevRttUs) exceeds the configured threshold (jnxPingCtlRttStdDevThreshold) and the rttStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt std dev threshold exceeded trap

jnxPingRttJitterThresholdExceeded

6

3

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the round trip time jitter (jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the configured threshold (jnxPingCtlRttJitterThreshold) and the rttJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt jitter threshold exceeded trap

jnxPingEgressThresholdExceeded

6

4

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the egress time (jnxPingResultsEgressUs) exceeds the configured threshold (jnxPingCtlEgressTimeThreshold) and the egressThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress threshold exceeded trap

jnxPingEgressStdDevThresholdExceeded

6

5

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the egress time (jnxPingResultsStddevEgressUs) exceeds the configured threshold (jnxPingCtlEgressStdDevThreshold) and the egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress std dev threshold exceeded trap

jnxPingEgressJitterThresholdExceeded

6

6

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the egress time jitter (jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs) exceeds the configured threshold (jnxPingCtlEgressJitterThreshold) and the egressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress jitter threshold exceeded trap

jnxPingIngressThresholdExceeded

6

7

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the ingress time (jnxPingResultsIngressUs) exceeds the configured threshold (jnxPingCtlIngressTimeThreshold) and the ingressThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress threshold exceeded trap

jnxPingIngressStddevThresholdExceeded

6

8

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the ingress time (jnxPingResultsStddevIngressUs) exceeds the configured threshold (jnxPingCtlIngressStddevThreshold) and the ingressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress std dev threshold exceeded trap

jnxPingIngressJitterThresholdExceeded

6

9

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the ingress time jitter (jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs) exceeds the configured threshold (jnxPingCtlIngressJitterThreshold) and the ingressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress jitter threshold exceeded trap

jnxBgpM2Established

6

1

1.3.6.1.4.1.2636.5.1.1.1.0

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper bgp M2 established trap

jnxBgpM2BackwardTransition

6

2

1.3.6.1.4.1.2636.5.1.1.1.0

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper bgp M2 backward transition trap

coldStart

1

 

1.3.6.1.6.3.1.1.5

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

warmStart

2

 

1.3.6.1.6.3.1.1.5

   

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Juniper Warm start trap

linkDown

3

 

1.3.6.1.6.3.1.1.5

   

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line down trap

linkUp

4

 

1.3.6.1.6.3.1.1.5

   

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line up trap

authenticationFailure

5

 

1.3.6.1.6.3.1.1.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Juniper SNMP authentication failure

ospfLsdbApproachingOverflow

6

15

1.3.6.1.2.1.14.16.2

   

An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.

Juniper OSPF Number of LSAs approaching overflow trap

ospfLsdbOverflow

6

14

1.3.6.1.2.1.14.16.2

   

An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data-base has exceeded ospfExtLsdbLimit.

Juniper OSPF Number of LSAs exceeded ospfExtLsdbLimit trap


Juniper M-Series V2 Traps

Table 11-16 lists the Juniper M-Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-46.

Table 11-16 Juniper M-Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status invalid trap

frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status active trap

frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. If, however, the reason for the state change is due to the DLCMI going down, per-DLCI traps should not be generated.

Juniper FR DLCI status inactive trap

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

1.3.6.1.2.1.14.9.1.7

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

1.3.6.1.2.1.14.9.1.7

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Up

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

.1.3.6.1.2.1.14.16.2.5

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

.1.3.6.1.2.1.14.16.2.6

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

.1.3.6.1.2.1.14.16.2.7

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

.1.3.6.1.2.1.14.16.2.10

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

bgpBackwardTransition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

bgpEstablished

.1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

!= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

newRoot

1.3.6.1.2.1.17.0.1

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new stp root

topologyChange

1.3.6.1.2.1.17.0.2

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

dlswTrapCircuitUp

1.3.6.1.2.1.46.1.0.5

   

This trap is sent each time a circuit enters `connected' state. The emission of this trap is controlled by dlswTrapCntlCircuit.

DLSW circuit up trap

dlswTrapCircuitDown

1.3.6.1.2.1.46.1.0.6

   

This trap is sent each time a circuit enters `disconnected' state. The emission of this trap is controlled by dlswTrapCntlCircuit.

DLSW circuit down trap

entConfigChange

1.3.6.1.2.1.47.2.0.1

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away. An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed

mplsLspUp

1.3.6.1.4.1.2636.3.2.0.1

   

An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathName.

juniper mpls Lsp Up trap

mplsLspDown

1.3.6.1.4.1.2636.3.2.0.2

   

An mplsLspDown trap signifies that the specified LSP is down, because the current active path mplsPathName went down.

juniper mpls Lsp Down trap

mplsLspChange

1.3.6.1.4.1.2636.3.2.0.3

   

An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over

juniper mpls Lsp Change trap

mplsLspPathDown

1.3.6.1.4.1.2636.3.2.0.4

   

An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down

juniper mpls lsp path down trap

mplsLspPathUp

1.3.6.1.4.1.2636.3.2.0.5

   

An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up

juniper mpls lsp path up trap

apsEventSwitchover

1.3.6.1.4.1.2636.3.24.2.0.1

   

An apsEventSwitchover notification is sent when the value of an instance of apsChanStatusSwitchovers increments.

juniper aps event switch over trap

apsEventModeMismatch

1.3.6.1.4.1.2636.3.24.2.0.2

   

An apsEventModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments.

juniper aps event mode mismatch trap

apsEventChannelMismatch

1.3.6.1.4.1.2636.3.24.2.0.3

   

An apsEventChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments.

juniper aps event channel mismatch trap

apsEventPSBF

1.3.6.1.4.1.2636.3.24.2.0.4

   

An apsEventPSBF notification is sent when the value of an instance of apsStatusPSBFs increments.

juniper aps event psbf trap

apsEventFEPLF

1.3.6.1.4.1.2636.3.24.2.0.5

   

An apsEventFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments.

juniper aps event feplf trap

jnxVpnIfUp

1.3.6.1.4.1.2636.3.26.0.1

   

A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.

Juniper VPN Interface Up

jnxVpnIfDown

1.3.6.1.4.1.2636.3.26.0.2

   

A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.

Juniper VPN Interface Down

jnxVpnPwUp

1.3.6.1.4.1.2636.3.26.0.3

   

A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.

juniper vpn PW up

jnxVpnPwDown

1.3.6.1.4.1.2636.3.26.0.4

   

A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named VpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.

juniper vpn PW down

jnxPowerSupplyFailure

1.3.6.1.4.1.2636.4.1.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

juniper power supply failure Trap

jnxPowerSupplyOK

1.3.6.1.4.1.2636.4.2.1

   

A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition.

juniper power supply ok trap

jnxFruOffline

1.3.6.1.4.1.2636.4.1.10

   

A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit)

juniper fru offline Trap

jnxFruOnline

1.3.6.1.4.1.2636.4.1.11

   

A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis.

juniper fru online Trap

jnxFruCheck

1.3.6.1.4.1.2636.4.1.12

   

A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis.

juniper fru check Trap

jnxFanFailure

1.3.6.1.4.1.2636.4.1.2

   

A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition.

juniper fan failure Trap

jnxFanOK

1.3.6.1.4.1.2636.4.2.2

   

A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition.

juniper fan ok trap

jnxOverTemperature

1.3.6.1.4.1.2636.4.1.3

   

A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition.

juniper over temperature Trap

jnxTemperatureOK

1.3.6.1.4.1.2636.4.2.3

   

A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition.

juniper temperature ok trap

jnxRedundancySwitchover

1.3.6.1.4.1.2636.4.1.4

   

A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa.

juniper redundancy switch over Trap

jnxFruRemoval

1.3.6.1.4.1.2636.4.1.5

   

A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis.

juniper fru removal Trap

jnxFruInsertion

1.3.6.1.4.1.2636.4.1.6

   

A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis.

juniper fru insertion Trap

jnxFruPowerOff

1.3.6.1.4.1.2636.4.1.7

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper fru power off Trap

jnxFruPowerOn

1.3.6.1.4.1.2636.4.1.8

   

A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis.

Juniper fru power on Trap

jnxFruFailed

1.3.6.1.4.1.2636.4.1.9

   

This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due to some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced.

juniper fru failed Trap

jnxFruOk

1.3.6.1.4.1.2636.4.2.4

   

A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis. A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.

juniper fru ok Trap

jnxSpSvcSetZoneEntered

1.3.6.1.4.1.2636.4.10.0.1

   

This indicates a Service PIC has entered a more severe memory-usage zone from a less severe memory usage zone. The zone entered is identified by jnxSpSvcSetIfMemoryZone.

juniper Sp svc set zone entered trap

jnxSpSvcSetZoneExited

1.3.6.1.4.1.2636.4.10.0.2

   

This indicates a Service Pic has exited a more severe memory-usage zone to a less severe memory usage zone. The zone exited is identified by jnxSpSvcSetIfMemoryZone.

juniper Sp svc set zone exited trap

jnxSpSvcSetCpuExceeded

1.3.6.1.4.1.2636.4.10.0.3

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

juniper Sp svc set cpu exceeded trap

jnxSpSvcSetCpuOk

1.3.6.1.4.1.2636.4.10.0.4

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

juniper Sp svc set cpu ok trap

jnxDfcSoftPpsThresholdExceeded

1.3.6.1.4.1.2636.4.11.0.1

   

Notification of input packet rate (in packet per second) going beyond the configured limit.

juniper dfc soft pps threshold exceeded trap

jnxDfcSoftPpsUnderThreshold

1.3.6.1.4.1.2636.4.11.0.2

   

Notification of input packet rate (in packet per second) dropping back to below the configured limit.

juniper dfc soft pps under threshold trap

jnxDfcHardPpsThresholdExceeded

1.3.6.1.4.1.2636.4.11.0.3

   

Notification of input packet rate (in packet per second) going beyond the recommended limit.

juniper dfc hard pps threshold exceeded trap

jnxDfcHardPpsUnderThreshold

1.3.6.1.4.1.2636.4.11.0.4

   

Notification of input packet rate (in packet per second) dropping back to below the recommended limit.

juniper dfc hard pps under threshold trap

jnxDfcSoftMemThresholdExceeded

1.3.6.1.4.1.2636.4.11.0.5

   

Notification of memory overload condition i.e. memory usage is going beyond the configured limit.

juniper dfc soft mem threshold exceeded trap

jnxDfcSoftMemUnderThreshold

1.3.6.1.4.1.2636.4.11.0.6

   

Notification of memory usage dropping back to below the configured limit.

juniper dfc soft mem under threshold trap

jnxDfcHardMemThresholdExceeded

1.3.6.1.4.1.2636.4.11.0.7

   

Notification of memory overload condition i.e. memory usage is going beyond the recommended limit.

juniper dfc hard mem threshold exceeded trap

jnxDfcHardMemUnderThreshold

1.3.6.1.4.1.2636.4.11.0.8

   

Notification of memory usage dropping back to below the recommended limit.

juniper dfc hard mem under threshold trap

jnxRmonAlarmGetFailure

1.3.6.1.4.1.2636.4.3.0.1

   

The SNMP trap that is generated when the get request for an alarm variable returns an error. The specific error is identified by jnxRmonAlarmGetFailReason.

juniper Rmon alarm get failure trap

jnxRmonGetOk

1.3.6.1.4.1.2636.4.3.0.2

   

The SNMP trap that is generated when the get request for an alarm variable is successful. This is only sent after previous attempts were unsuccessful.

juniper Rmon get ok trap

jnxLdpLspUp

1.3.6.1.4.1.2636.4.4.0.1

   

The SNMP trap that is generated when an LSP comes up.

juniper Ldp Lsp Up trap

jnxLdpLspDown

1.3.6.1.4.1.2636.4.4.0.2

   

The SNMP trap that is generated when the LSP goes down.

juniper Ldp Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.1.2636.4.4.0.3

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' enters the `operational(5) state'.

juniper ldp session up trap

jnxLdpSesDown

1.3.6.1.4.1.2636.4.4.0.4

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' leaves the `operational(5) state'. The value of jnxLdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3).

juniper ldp session down trap

jnxCmCfgChange

1.3.6.1.4.1.2636.4.5.0.1

   

Notification of a configuration management event as recorded in jnxCmCfgChgEventTable.

juniper Cm cfg change trap

jnxCmRescueChange

1.3.6.1.4.1.2636.4.5.0.2

   

Notification of the latest rescue configuration change.

juniper Cm rescue change trap

jnxSonetAlarmSet

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently set sonet/sdh alarm.

Juniper sonet alarm set trap

jnxSonetAlarmCleared

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently cleared sonet/sdh alarm.

Juniper sonet alarm cleared trap

jnxPMonOverloadSet

1.3.6.1.4.1.2636.4.7.0.1

   

Notification of a new overload condition on a Passive Monitoring interface.

juniper PMon overload set trap

jnxPMonOverloadCleared

1.3.6.1.4.1.2636.4.7.0.2

   

Notification of a cleared overload condition on a Passive Monitoring interface.

juniper PMon overload cleared trap

jnxCollUnavailableDest

1.3.6.1.4.1.2636.4.8.0.1

   

Notification of an unavailable destination failure encountered while transferring a collector file.

juniper collector unavailable dest trap

jnxCollUnavailableDestCleared

1.3.6.1.4.1.2636.4.8.0.2

   

This indicates a previous unavailable destination failure has been resolved.

juniper collector unavailable dest cleared trap

jnxCollUnsuccessfulTransfer

1.3.6.1.4.1.2636.4.8.0.3

   

This indicates an error was encountered while attempting a file transfer.

juniper collector unsuccessful transfer trap

jnxCollFlowOverload

1.3.6.1.4.1.2636.4.8.0.4

   

This indicates a soft or hard flow overload condition has been triggered.

juniper collector flow overload trap

jnxCollFlowOverloadCleared

1.3.6.1.4.1.2636.4.8.0.5

   

This indicates a soft or hard flow overload condition has been cleared.

juniper collector flow overload cleared trap

jnxCollMemoryUnavailable

1.3.6.1.4.1.2636.4.8.0.6

   

This indicates a memory unavailable condition has been triggered.

juniper collector memory unavailable trap

jnxCollMemoryAvailable

1.3.6.1.4.1.2636.4.8.0.7

   

This indicates a memory unavailable condition has been cleared.

juniper collector memory available trap

jnxCollFtpSwitchover

1.3.6.1.4.1.2636.4.8.0.8

   

This indicates an FTP server switchover has occurred.

juniper collector ftp switch over trap

jnxPingRttThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.1

   

This notification is generated when the round trip time (jnxPingCtlRttThreshold) exceeds the configured threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt threshold exceeded trap

jnxPingRttStdDevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.2

   

This notification is generated when the standard deviation of the round trip time (jnxPingResultsStdDevRttUs) exceeds the configured threshold (jnxPingCtlRttStdDevThreshold) and the rttStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt std dev threshold exceeded trap

jnxPingRttJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.3

   

This notification is generated when the round trip time jitter (jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the configured threshold (jnxPingCtlRttJitterThreshold) and the rttJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt jitter threshold exceeded trap

jnxPingEgressThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.4

   

This notification is generated when the egress time (jnxPingResultsEgressUs) exceeds the configured threshold (jnxPingCtlEgressTimeThreshold) and the egressThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress threshold exceeded trap

jnxPingEgressStdDevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.5

   

This notification is generated when the standard deviation of the egress time (jnxPingResultsStddevEgressUs) exceeds the configured threshold (jnxPingCtlEgressStdDevThreshold) and the egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress std dev threshold exceeded trap

jnxPingEgressJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.6

   

This notification is generated when the egress time jitter (jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs) exceeds the configured threshold (jnxPingCtlEgressJitterThreshold) and the egressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress jitter threshold exceeded trap

jnxPingIngressThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.7

   

This notification is generated when the ingress time (jnxPingResultsIngressUs) exceeds the configured threshold (jnxPingCtlIngressTimeThreshold) and the ingressThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress threshold exceeded trap

jnxPingIngressStddevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.8

   

This notification is generated when the standard deviation of the ingress time (jnxPingResultsStddevIngressUs) exceeds the configured threshold (jnxPingCtlIngressStddevThreshold) and the ingressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress std dev threshold exceeded trap

jnxPingIngressJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.9

   

This notification is generated when the ingress time jitter (jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs) exceeds the configured threshold (jnxPingCtlIngressJitterThreshold) and the ingressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress jitter threshold exceeded trap

jnxBgpM2Established

1.3.6.1.4.1.2636.5.1.1.1.0.1

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

juniper bgp M2 established trap

jnxBgpM2BackwardTransition

1.3.6.1.4.1.2636.5.1.1.1.0.2

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

juniper bgp M2 backward transition trap

coldStart

1.3.6.1.6.3.1.1.5.1

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

warmStart

1.3.6.1.6.3.1.1.5.2

   

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Juniper Warm start trap

linkDown

1.3.6.1.6.3.1.1.5.3

   

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line down trap

linkUp

1.3.6.1.6.3.1.1.5.4

   

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line up trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Juniper SNMP authentication failure

ospfLsdbApproachingOverflow

1.3.6.1.2.1.14.16.2.15

   

An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.

Juniper OSPF Number of LSAs approaching overflow trap

ospfLsdbOverflow

1.3.6.1.2.1.14.16.2.14

   

An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data-base has exceeded ospfExtLsdbLimit.

Juniper OSPF Number of LSAs exceeded ospfExtLsdbLimit trap


Juniper MX-Series V1 Traps

Table 11-17 lists the Juniper MX-Series V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-47.

Table 11-17 Juniper MX-Series V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.9.1.7

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.9.1.7

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Up

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

6

2

 

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

6

5

1.3.6.1.2.1.14.16.2

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

6

7

1.3.6.1.2.1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

6

9

1.3.6.1.2.1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

6

11

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

bgpEstablished

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

bgpBackwardTransition

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

1

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

newRoot

6

1

1.3.6.1.2.1.17.0

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new stp root

topologyChange

6

2

1.3.6.1.2.1.17.0

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

entConfigChange

6

1

1.3.6.1.2.1.47.2.0

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.
If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away.
An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed

mplsLspUp

6

1

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathName.

Juniper mpls Lsp Up trap

mplsLspDown

6

2

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspDown trap signifies that the specified LSP is down, because the current active path mplsPathName went down.

Juniper mpls Lsp Down trap

mplsLspChange

6

3

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over

Juniper mpls Lsp Change trap

mplsLspPathDown

6

4

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down

Juniper mpls lsp path down trap

mplsLspPathUp

6

5

1.3.6.1.4.1.2636.3.2.0

   

An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up

Juniper mpls lsp path up trap

apsEventSwitchover

6

1

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventSwitchover notification is sent when the value of an instance of apsChanStatusSwitchovers increments.

Juniper aps event switch over trap

apsEventModeMismatch

6

2

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments.

Juniper aps event mode mismatch trap

apsEventChannelMismatch

6

3

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments.

Juniper aps event channel mismatch trap

apsEventPSBF

6

4

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventPSBF notification is sent when the value of an instance of apsStatusPSBFs increments.

Juniper aps event psbf trap

apsEventFEPLF

6

5

1.3.6.1.4.1.2636.3.24.2.0

   

An apsEventFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments.

Juniper aps event feplf trap

jnxVpnIfUp

6

1

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.

Juniper VPN Interface Up

jnxVpnIfDown

6

2

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.

Juniper VPN Interface Down

jnxVpnPwUp

6

3

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.

Juniper vpn power up trap

jnxVpnPwDown

6

4

1.3.6.1.4.1.2636.3.26.0

   

A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named VpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.

Juniper vpn power down trap

jnxPowerSupplyFailure

6

1

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper power supply failure Trap

jnxPowerSupplyOK

6

1

1.3.6.1.4.1.2636.4.2

   

A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition.

Juniper power supply ok trap

jnxFanFailure

6

2

1.3.6.1.4.1.2636.4.1

   

A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition.

Juniper fan failure Trap

jnxFanOK

6

2

1.3.6.1.4.1.2636.4.2

   

A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition.

Juniper fan ok trap

jnxOverTemperature

6

3

1.3.6.1.4.1.2636.4.1

   

A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition.

Juniper over temperature Trap

jnxTemperatureOK

6

3

1.3.6.1.4.1.2636.4.2

   

A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition.

Juniper temperature ok trap

jnxRedundancySwitchover

6

4

1.3.6.1.4.1.2636.4.1

   

A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa.

Juniper redundancy switch over Trap

jnxFruRemoval

6

5

1.3.6.1.4.1.2636.4.1

   

A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis.

Juniper fru removal Trap

jnxFruInsertion

6

6

1.3.6.1.4.1.2636.4.1

   

A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis.

Juniper fru insertion Trap

jnxFruPowerOff

6

7

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper Card Down Trap

jnxFruPowerOn

6

8

1.3.6.1.4.1.2636.4.1

   

A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis.

Juniper fru power on Trap

jnxFruFailed

6

9

1.3.6.1.4.1.2636.4.1

   

This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due to some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced.

Juniper fru failed Trap

jnxFruOk

6

4

1.3.6.1.4.1.2636.4.2

   

A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis. A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.

juniper fru ok Trap

jnxFruOffline

6

10

1.3.6.1.4.1.2636.4.1

   

A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit)

Juniper fru offline Trap

jnxFruOnline

6

11

1.3.6.1.4.1.2636.4.1

   

A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis.

Juniper fru online Trap

jnxFruCheck

6

12

1.3.6.1.4.1.2636.4.1

   

A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis.

Juniper fru check Trap

jnxSpSvcSetZoneEntered

6

1

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service PIC has entered a more severe memory-usage zone from a less severe memory usage zone. The zone entered is identified by jnxSpSvcSetIfMemoryZone.

Juniper Sp svc set zone entered trap

jnxSpSvcSetZoneExited

6

2

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exited a more severe memory-usage zone to a less severe memory usage zone. The zone exited is identified by jnxSpSvcSetIfMemoryZone.

Juniper Sp svc set zone exited trap

jnxSpSvcSetCpuExceeded

6

3

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

Juniper Sp svc set cpu exceeded trap

jnxSpSvcSetCpuOk

6

4

1.3.6.1.4.1.2636.4.10.0

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

Juniper Sp svc set cpu ok trap

jnxRmonAlarmGetFailure

6

1

1.3.6.1.4.1.2636.4.3.0

   

The SNMP trap that is generated when the get request for an alarm variable returns an error. The specific error is identified by jnxRmonAlarmGetFailReason.

Juniper Rmon alarm get failure trap

jnxRmonGetOk

6

2

1.3.6.1.4.1.2636.4.3.0

   

The SNMP trap that is generated when the get request for an alarm variable is successful. This is only sent after previous attempts were unsuccessful.

Juniper Rmon get ok trap

jnxLdpLspUp

6

1

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when an LSP comes up.

Juniper Ldp Lsp Up trap

jnxLdpLspDown

6

2

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the LSP goes down.

Juniper Ldp Lsp Down trap

jnxLdpSesUp

6

3

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' enters the `operational(5) state'.

Juniper ldp session up trap

jnxLdpSesDown

6

4

1.3.6.1.4.1.2636.4.4.0

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' leaves the `operational(5) state'. The value of jnxLdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3).

Juniper ldp session down trap

jnxCmCfgChange

6

1

1.3.6.1.4.1.2636.4.5.0

   

Notification of a configuration management event as recorded in jnxCmCfgChgEventTable.

Juniper Cm cfg change trap

jnxCmRescueChange

6

2

1.3.6.1.4.1.2636.4.5.0

   

Notification of the latest rescue configuration change.

Juniper Cm rescue change trap

jnxSonetAlarmSet

6

1

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently set sonet/sdh alarm.

Juniper sonet alarm set trap

jnxSonetAlarmCleared

6

2

1.3.6.1.4.1.2636.4.6.0

   

Notification of a recently cleared sonet/sdh alarm.

Juniper sonet alarm cleared trap

jnxPMonOverloadSet

6

1

1.3.6.1.4.1.2636.4.7.0

   

Notification of a new overload condition on a Passive Monitoring interface.

Juniper PMon overload set trap

jnxPMonOverloadCleared

6

2

1.3.6.1.4.1.2636.4.7.0

   

Notification of a cleared overload condition on a Passive Monitoring interface.

Juniper PMon overload cleared trap

jnxCollUnavailableDest

6

1

1.3.6.1.4.1.2636.4.8.0

   

Notification of an unavailable destination failure encountered while transferring a collector file.

Juniper coll unavailable dest trap

jnxCollUnavailableDestCleared

6

2

1.3.6.1.4.1.2636.4.8.0

   

This indicates a previous unavailable destination failure has been resolved.

Juniper coll unavailable dest cleared trap

jnxCollUnsuccessfulTransfer

6

3

1.3.6.1.4.1.2636.4.8.0

   

This indicates an error was encountered while attempting a file transfer.

Juniper coll unsuccessful transfer trap

jnxCollFlowOverload

6

4

1.3.6.1.4.1.2636.4.8.0

   

This indicates a soft or hard flow overload condition has been triggered.

Juniper coll flow overload trap

jnxCollFlowOverloadCleared

6

5

1.3.6.1.4.1.2636.4.8.0

   

This indicates a soft or hard flow overload condition has been cleared.

Juniper coll flow overload cleared trap

jnxCollMemoryUnavailable

6

6

1.3.6.1.4.1.2636.4.8.0

   

This indicates a memory unavailable condition has been triggered.

Juniper coll memory unavailable trap

jnxCollMemoryAvailable

6

7

1.3.6.1.4.1.2636.4.8.0

   

This indicates a memory unavailable condition has been cleared.

Juniper coll memory available trap

jnxCollFtpSwitchover

6

8

1.3.6.1.4.1.2636.4.8.0

   

This indicates an FTP server switchover has occurred.

Juniper coll ftp switch over trap

jnxPingRttThresholdExceeded

6

1

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the round trip time (jnxPingCtlRttThreshold) exceeds the configured threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt threshold exceeded trap

jnxPingRttStdDevThresholdExceeded

6

2

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the round trip time (jnxPingResultsStdDevRttUs) exceeds the configured threshold (jnxPingCtlRttStdDevThreshold) and the rttStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt std dev threshold exceeded trap

jnxPingRttJitterThresholdExceeded

6

3

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the round trip time jitter (jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the configured threshold (jnxPingCtlRttJitterThreshold) and the rttJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping rtt jitter threshold exceeded trap

jnxPingEgressThresholdExceeded

6

4

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the egress time (jnxPingResultsEgressUs) exceeds the configured threshold (jnxPingCtlEgressTimeThreshold) and the egressThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress threshold exceeded trap

jnxPingEgressStdDevThresholdExceeded

6

5

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the egress time (jnxPingResultsStddevEgressUs) exceeds the configured threshold (jnxPingCtlEgressStdDevThreshold) and the egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress std dev threshold exceeded trap

jnxPingEgressJitterThresholdExceeded

6

6

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the egress time jitter (jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs) exceeds the configured threshold (jnxPingCtlEgressJitterThreshold) and the egressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping egress jitter threshold exceeded trap

jnxPingIngressThresholdExceeded

6

7

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the ingress time (jnxPingResultsIngressUs) exceeds the configured threshold (jnxPingCtlIngressTimeThreshold) and the ingressThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress threshold exceeded trap

jnxPingIngressStddevThresholdExceeded

6

8

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the standard deviation of the ingress time (jnxPingResultsStddevIngressUs) exceeds the configured threshold (jnxPingCtlIngressStddevThreshold) and the ingressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress std dev threshold exceeded trap

jnxPingIngressJitterThresholdExceeded

6

9

1.3.6.1.4.1.2636.4.9.0

   

This notification is generated when the ingress time jitter (jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs) exceeds the configured threshold (jnxPingCtlIngressJitterThreshold) and the ingressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

Juniper ping ingress jitter threshold exceeded trap

jnxBgpM2Established

6

1

1.3.6.1.4.1.2636.5.1.1.1.0

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper bgp M2 established trap

jnxBgpM2BackwardTransition

6

2

1.3.6.1.4.1.2636.5.1.1.1.0

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper bgp M2 backward transition trap

coldStart

1

 

1.3.6.1.6.3.1.1.5

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

warmStart

2

 

1.3.6.1.6.3.1.1.5

   

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Juniper Warm start trap

linkDown

3

 

1.3.6.1.6.3.1.1.5

   

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line down trap

linkUp

4

 

1.3.6.1.6.3.1.1.5

   

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line up trap

authenticationFailure

5

 

1.3.6.1.6.3.1.1.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Juniper SNMP authentication failure

ospfLsdbApproachingOverflow

6

15

1.3.6.1.2.1.14.16.2

   

An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.

Juniper OSPF Number of LSAs approaching overflow trap

ospfLsdbOverflow

6

14

1.3.6.1.2.1.14.16.2

   

An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data-base has exceeded ospfExtLsdbLimit.

Juniper OSPF Number of LSAs exceeded ospfExtLsdbLimit trap


Juniper MX-Series V2 Traps

Table 11-18 lists the Juniper MX-Series V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-48.

Table 11-18 Juniper MX-Series V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

1.3.6.1.2.1.14.9.1.7

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

1.3.6.1.2.1.14.9.1.7

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Up

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

.1.3.6.1.2.1.14.16.2.5

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

.1.3.6.1.2.1.14.16.2.6

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

.1.3.6.1.2.1.14.16.2.7

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

.1.3.6.1.2.1.14.16.2.10

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

bgpBackwardTransition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

bgpEstablished

.1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

!= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

newRoot

1.3.6.1.2.1.17.0.1

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new stp root

topologyChange

1.3.6.1.2.1.17.0.2

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

entConfigChange

1.3.6.1.2.1.47.2.0.1

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations. If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away. An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed

mplsLspUp

1.3.6.1.4.1.2636.3.2.0.1

   

An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathName.

juniper mpls Lsp Up trap

mplsLspDown

1.3.6.1.4.1.2636.3.2.0.2

   

An mplsLspDown trap signifies that the specified LSP is down, because the current active path mplsPathName went down.

juniper mpls Lsp Down trap

mplsLspChange

1.3.6.1.4.1.2636.3.2.0.3

   

An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over

juniper mpls Lsp Change trap

mplsLspPathDown

1.3.6.1.4.1.2636.3.2.0.4

   

An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down

juniper mpls lsp path down trap

mplsLspPathUp

1.3.6.1.4.1.2636.3.2.0.5

   

An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up

juniper mpls lsp path up trap

apsEventSwitchover

1.3.6.1.4.1.2636.3.24.2.0.1

   

An apsEventSwitchover notification is sent when the value of an instance of apsChanStatusSwitchovers increments.

juniper aps event switch over trap

apsEventModeMismatch

1.3.6.1.4.1.2636.3.24.2.0.2

   

An apsEventModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments.

juniper aps event mode mismatch trap

apsEventChannelMismatch

1.3.6.1.4.1.2636.3.24.2.0.3

   

An apsEventChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments.

juniper aps event channel mismatch trap

apsEventPSBF

1.3.6.1.4.1.2636.3.24.2.0.4

   

An apsEventPSBF notification is sent when the value of an instance of apsStatusPSBFs increments.

juniper aps event psbf trap

apsEventFEPLF

1.3.6.1.4.1.2636.3.24.2.0.5

   

An apsEventFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments.

juniper aps event feplf trap

jnxVpnIfUp

1.3.6.1.4.1.2636.3.26.0.1

   

A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.

Juniper VPN Interface Up

jnxVpnIfDown

1.3.6.1.4.1.2636.3.26.0.2

   

A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.

Juniper VPN Interface Down

jnxVpnPwUp

1.3.6.1.4.1.2636.3.26.0.3

   

A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.

juniper vpn PW up

jnxVpnPwDown

1.3.6.1.4.1.2636.3.26.0.4

   

A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named VpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.

juniper vpn PW down

jnxPowerSupplyFailure

1.3.6.1.4.1.2636.4.1.1

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

juniper power supply failure Trap

jnxPowerSupplyOK

1.3.6.1.4.1.2636.4.2.1

   

A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition.

juniper power supply ok trap

jnxFruOffline

1.3.6.1.4.1.2636.4.1.10

   

A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit)

juniper fru offline Trap

jnxFruOnline

1.3.6.1.4.1.2636.4.1.11

   

A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis.

juniper fru online Trap

jnxFruCheck

1.3.6.1.4.1.2636.4.1.12

   

A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis.

juniper fru check Trap

jnxFanFailure

1.3.6.1.4.1.2636.4.1.2

   

A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition.

juniper fan failure Trap

jnxFanOK

1.3.6.1.4.1.2636.4.2.2

   

A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition.

juniper fan ok trap

jnxOverTemperature

1.3.6.1.4.1.2636.4.1.3

   

A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition.

juniper over temperature Trap

jnxTemperatureOK

1.3.6.1.4.1.2636.4.2.3

   

A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition.

juniper temperature ok trap

jnxRedundancySwitchover

1.3.6.1.4.1.2636.4.1.4

   

A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa.

juniper redundancy switch over Trap

jnxFruRemoval

1.3.6.1.4.1.2636.4.1.5

   

A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis.

juniper fru removal Trap

jnxFruInsertion

1.3.6.1.4.1.2636.4.1.6

   

A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis.

juniper fru insertion Trap

jnxFruPowerOff

1.3.6.1.4.1.2636.4.1.7

   

A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.

Juniper fru power off Trap

jnxFruPowerOn

1.3.6.1.4.1.2636.4.1.8

   

A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis.

Juniper fru power on Trap

jnxFruFailed

1.3.6.1.4.1.2636.4.1.9

   

This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due to some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced.

juniper fru failed Trap

jnxFruOk

1.3.6.1.4.1.2636.4.2.4

   

A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.

juniper fru ok Trap

jnxSpSvcSetZoneEntered

1.3.6.1.4.1.2636.4.10.0.1

   

This indicates a Service PIC has entered a more severe memory-usage zone from a less severe memory usage zone. The zone entered is identified by jnxSpSvcSetIfMemoryZone.

juniper Sp svc set zone entered trap

jnxSpSvcSetZoneExited

1.3.6.1.4.1.2636.4.10.0.2

   

This indicates a Service Pic has exited a more severe memory-usage zone to a less severe memory usage zone. The zone exited is identified by jnxSpSvcSetIfMemoryZone.

juniper Sp svc set zone exited trap

jnxSpSvcSetCpuExceeded

1.3.6.1.4.1.2636.4.10.0.3

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

juniper Sp svc set cpu exceeded trap

jnxSpSvcSetCpuOk

1.3.6.1.4.1.2636.4.10.0.4

   

This indicates a Service Pic has exceeded its internal threshold for CPU utilization (85%).

juniper Sp svc set cpu ok trap

jnxRmonAlarmGetFailure

1.3.6.1.4.1.2636.4.3.0.1

   

The SNMP trap that is generated when the get request for an alarm variable returns an error. The specific error is identified by jnxRmonAlarmGetFailReason.

juniper Rmon alarm get failure trap

jnxRmonGetOk

1.3.6.1.4.1.2636.4.3.0.2

   

The SNMP trap that is generated when the get request for an alarm variable is successful. This is only sent after previous attempts were unsuccessful.

juniper Rmon get ok trap

jnxLdpLspUp

1.3.6.1.4.1.2636.4.4.0.1

   

The SNMP trap that is generated when an LSP comes up.

juniper Ldp Lsp Up trap

jnxLdpLspDown

1.3.6.1.4.1.2636.4.4.0.2

   

The SNMP trap that is generated when the LSP goes down.

juniper Ldp Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.1.2636.4.4.0.3

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' enters the `operational(5) state'.

juniper ldp session up trap

jnxLdpSesDown

1.3.6.1.4.1.2636.4.4.0.4

   

The SNMP trap that is generated when the value of 'mplsLdpSesState' leaves the `operational(5) state'. The value of jnxLdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when jnxLdpSesDownReason is allAdjacenciesDown (3).

juniper ldp session down trap

jnxCmCfgChange

1.3.6.1.4.1.2636.4.5.0.1

   

Notification of a configuration management event as recorded in jnxCmCfgChgEventTable.

juniper Cm cfg change trap

jnxCmRescueChange

1.3.6.1.4.1.2636.4.5.0.2

   

Notification of the latest rescue configuration change.

juniper Cm rescue change trap

jnxSonetAlarmSet

1.3.6.1.4.1.2636.4.6.0.1

   

Notification of a recently set sonet/sdh alarm.

juniper sonet alarm set trap

jnxSonetAlarmCleared

1.3.6.1.4.1.2636.4.6.0.2

   

Notification of a recently cleared sonet/sdh alarm.

juniper sonet alarm cleared trap

jnxPMonOverloadSet

1.3.6.1.4.1.2636.4.7.0.1

   

Notification of a new overload condition on a Passive Monitoring interface.

juniper PMon overload set trap

jnxPMonOverloadCleared

1.3.6.1.4.1.2636.4.7.0.2

   

Notification of a cleared overload condition on a Passive Monitoring interface.

juniper PMon overload cleared trap

jnxCollUnavailableDest

1.3.6.1.4.1.2636.4.8.0.1

   

Notification of an unavailable destination failure encountered while transferring a collector file.

juniper collector unavailable dest trap

jnxCollUnavailableDestCleared

1.3.6.1.4.1.2636.4.8.0.2

   

This indicates a previous unavailable destination failure has been resolved.

juniper collector unavailable dest cleared trap

jnxCollUnsuccessfulTransfer

1.3.6.1.4.1.2636.4.8.0.3

   

This indicates an error was encountered while attempting a file transfer.

juniper collector unsuccessful transfer trap

jnxCollFlowOverload

1.3.6.1.4.1.2636.4.8.0.4

   

This indicates a soft or hard flow overload condition has been triggered.

juniper collector flow overload trap

jnxCollFlowOverloadCleared

1.3.6.1.4.1.2636.4.8.0.5

   

This indicates a soft or hard flow overload condition has been cleared.

juniper collector flow overload cleared trap

jnxCollMemoryUnavailable

1.3.6.1.4.1.2636.4.8.0.6

   

This indicates a memory unavailable condition has been triggered.

juniper collector memory unavailable trap

jnxCollMemoryAvailable

1.3.6.1.4.1.2636.4.8.0.7

   

This indicates a memory unavailable condition has been cleared.

juniper collector memory available trap

jnxCollFtpSwitchover

1.3.6.1.4.1.2636.4.8.0.8

   

This indicates an FTP server switchover has occurred.

juniper collector ftp switch over trap

jnxPingRttThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.1

   

This notification is generated when the round trip time (jnxPingCtlRttThreshold) exceeds the configured threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt threshold exceeded trap

jnxPingRttStdDevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.2

   

This notification is generated when the standard deviation of the round trip time (jnxPingResultsStdDevRttUs) exceeds the configured threshold (jnxPingCtlRttStdDevThreshold) and the rttStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt std dev threshold exceeded trap

jnxPingRttJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.3

   

This notification is generated when the round trip time jitter (jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the configured threshold (jnxPingCtlRttJitterThreshold) and the rttJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping rtt jitter threshold exceeded trap

jnxPingEgressThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.4

   

This notification is generated when the egress time (jnxPingResultsEgressUs) exceeds the configured threshold (jnxPingCtlEgressTimeThreshold) and the egressThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress threshold exceeded trap

jnxPingEgressStdDevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.5

   

This notification is generated when the standard deviation of the egress time (jnxPingResultsStddevEgressUs) exceeds the configured threshold (jnxPingCtlEgressStdDevThreshold) and the egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress std dev threshold exceeded trap

jnxPingEgressJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.6

   

This notification is generated when the egress time jitter (jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs) exceeds the configured threshold (jnxPingCtlEgressJitterThreshold) and the egressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping egress jitter threshold exceeded trap

jnxPingIngressThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.7

   

This notification is generated when the ingress time (jnxPingResultsIngressUs) exceeds the configured threshold (jnxPingCtlIngressTimeThreshold) and the ingressThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress threshold exceeded trap

jnxPingIngressStddevThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.8

   

This notification is generated when the standard deviation of the ingress time (jnxPingResultsStddevIngressUs) exceeds the configured threshold (jnxPingCtlIngressStddevThreshold) and the ingressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress std dev threshold exceeded trap

jnxPingIngressJitterThresholdExceeded

1.3.6.1.4.1.2636.4.9.0.9

   

This notification is generated when the ingress time jitter (jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs) exceeds the configured threshold (jnxPingCtlIngressJitterThreshold) and the ingressJitterThreshold bit is set in jnxPingCtlTrapGeneration.

juniper ping ingress jitter threshold exceeded trap

jnxBgpM2Established

1.3.6.1.4.1.2636.5.1.1.1.0.1

   

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

juniper bgp M2 established trap

jnxBgpM2BackwardTransition

1.3.6.1.4.1.2636.5.1.1.1.0.2

   

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

juniper bgp M2 backward transition trap

coldStart

1.3.6.1.6.3.1.1.5.1

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

warmStart

1.3.6.1.6.3.1.1.5.2

   

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Juniper Warm start trap

linkDown

1.3.6.1.6.3.1.1.5.3

   

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line down trap

linkUp

1.3.6.1.6.3.1.1.5.4

   

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line up trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

Juniper SNMP authentication failure

ospfLsdbApproachingOverflow

1.3.6.1.2.1.14.16.2.15

   

An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfExtLsdbLimit that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.

Juniper OSPF Number of LSAs approaching overflow trap

ospfLsdbOverflow

1.3.6.1.2.1.14.16.2.14

   

An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data-base has exceeded ospfExtLsdbLimit.

Juniper OSPF Number of LSAs exceeded ospfExtLsdbLimit trap


Juniper Netscreen V1 Traps

Table 11-19 lists the Juniper Netscreen V1 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-49.

Table 11-19 Juniper Netscreen V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

logfull

6

100

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

24

This trap indicates that some kind of hardware problem has occured

logfull

devicedead

6

100

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

19

This trap indicates that some kind of hardware problem has occured

devicedead

genericHWfail

6

100

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

22

This trap indicates that some kind of hardware problem has occured

genericHWfail

cpuhigh

6

100

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

30

This trap indicates that some kind of hardware problem has occured

cpuhigh

lowmemory

6

100

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

20

This trap indicates that some kind of hardware problem has occured

lowmemory

highavialability

6

200

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

15

This trap indicates that some kind of firewall functions has been triggered.

highavialability

dstipsessionlimit

6

200

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

430

This trap indicates that some kind of firewall functions has been triggered.

dstipsessionlimit

nsrp vsd master

6

600

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

71

This trap indicates that NSRP status has occured.

nsrp vsd master

nsrp vsd backup

6

600

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

73

This trap indicates that NSRP status has occured.

nsrp vsd backup

nsrp rto up

6

600

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

60

This trap indicates that NSRP status has occured.

nsrp rto up

nsrp rto down

6

600

1.3.6.1.4.1.3224

1.3.6.1.4.1.3224.2.1

61

This trap indicates that NSRP status has occured.

nsrp rto down

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

6

5

1.3.6.1.2.1.14.16.2

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure`

ospfVirtIfAuthFailure

6

7

1.3.6.1.2.1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

6

9

1.3.6.1.2.1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

6

11

1.3.6.1.2.1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

JuniperOSPF interface state changed to Up

bgpEstablished

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

bgpBackwardTransition

6

1,2-6

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

1

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

newRoot

6

1

1.3.6.1.2.1.17.0

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new root trap

topologyChange

6

2

1.3.6.1.2.1.17.0

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

entConfigChange

6

1

1.3.6.1.2.1.47.2.0

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.
If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away.
An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed


Juniper Netscreen V2 Traps

Table 11-20 lists the Juniper Netscreen V2 traps supported in Prime Network. For associated event types, event subtypes, and Prime Network registry parameters, use the link under Short Description or see Table 11-50.

Table 11-20 Juniper Netscreen V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

logfull

1.3.6.1.4.1.3224.0.100

1.3.6.1.4.1.3224.2.1

24

This trap indicates that some kind of hardware problem has occured

logfull

devicedead

1.3.6.1.4.1.3224.0.100

1.3.6.1.4.1.3224.2.1

19

This trap indicates that some kind of hardware problem has occured

devicedead

genericHWfail

1.3.6.1.4.1.3224.0.100

1.3.6.1.4.1.3224.2.1

22

This trap indicates that some kind of hardware problem has occured

genericHWfail

cpuhigh

1.3.6.1.4.1.3224.0.100

1.3.6.1.4.1.3224.2.1

30

This trap indicates that some kind of hardware problem has occured

cpuhigh

lowmemory

1.3.6.1.4.1.3224.0.100

1.3.6.1.4.1.3224.2.1

20

This trap indicates that some kind of hardware problem has occured

lowmemory

highavialability

1.3.6.1.4.1.3224.0.200

1.3.6.1.4.1.3224.2.1

15

This trap indicates that some kind of firewall functions has been triggered.

highavialability

dstipsessionlimit

1.3.6.1.4.1.3224.0.200

1.3.6.1.4.1.3224.2.1

430

This trap indicates that some kind of firewall functions has been triggered.

dstipsessionlimit

nsrp vsd master

1.3.6.1.4.1.3224.0.600

1.3.6.1.4.1.3224.2.1

71

This trap indicates that NSRP status has occured.

nsrp vsd master

nsrp vsd backup

1.3.6.1.4.1.3224.0.600

1.3.6.1.4.1.3224.2.1

73

This trap indicates that NSRP status has occured.

nsrp vsd backup

nsrp rto up

1.3.6.1.4.1.3224.0.600

1.3.6.1.4.1.3224.2.1

60

This trap indicates that NSRP status has occured.

nsrp rto up

nsrp rto down

1.3.6.1.4.1.3224.0.600

1.3.6.1.4.1.3224.2.1

61

This trap indicates that NSRP status has occured.

nsrp rto down

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Down

ospfIfStateChange

.1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

Juniper OSPF interface state changed to Up

ospfVirtIfStateChange

.1.3.6.1.2.1.14.16.2.1

NA

NA

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

Juniper OSPF virtual interface state changed to Down

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state down

ospfNbrStateChange

.1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

Juniper OSPF neighbor state up

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state down

ospfVirtNbrStateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

Juniper OSPF virtual neighbor state up

ospfIfConfigError

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF interface configuration error

ospfVirtIfConfigError

.1.3.6.1.2.1.14.16.2.5

NA

NA

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

Juniper OSPF virtual interface configuration error

ospfIfAuthFailure

.1.3.6.1.2.1.14.16.2.6

NA

NA

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF interface authentication failure

ospfVirtIfAuthFailure

.1.3.6.1.2.1.14.16.2.7

NA

NA

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

Juniper OSPF virtual interface authentication failure

ospfIfRxBadPacket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

Juniper OSPF bad packet received

ospfVirtIfRxBadPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

Juniper OSPF bad packet received on virtual interface

ospfTxRetransmit

.1.3.6.1.2.1.14.16.2.10

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

Juniper OSPF packet retransmitted

ospfVirtIfTxRetransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

Juniper OSPF packet retransmitted on virtual interface

ospfOriginateLsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

Juniper OSPF new LSA originated

ospfMaxAgeLsa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

Juniper OSPF LSA aged to MaxAge

bgpBackwardTransition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

Juniper BGP down trap

bgpEstablished

.1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

Juniper BGP established trap

newRoot

1.3.6.1.2.1.17.0.1

   

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

Juniper new root trap

topologyChange

1.3.6.1.2.1.17.0.2

   

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Juniper Spanning Tree Topology Changed

entConfigChange

.1.3.6.1.2.1.47.2.0.1

   

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations.
If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away.
An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.

Juniper Entity table configuration changed

coldStart

1.3.6.1.6.3.1.1.5.1

   

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Juniper Cold start trap

warmStart

1.3.6.1.6.3.1.1.5.2

   

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.

Juniper Warm start trap

linkDown

1.3.6.1.6.3.1.1.5.3

   

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line down trap

linkUp

1.3.6.1.6.3.1.1.5.4

   

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

Juniper Line up trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

   

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicate