To integrate the servers:
Before You BeginBefore you integrate the
Prime Collaboration servers:
By default, the
Prime Collaboration Assurance server works in the secured mode (HTTPS) whereas
the Prime Collaboration Provisioning server works in the non-secure (HTTP)
mode. You must configure the Prime Collaboration Provisioning server in the
HTTPS mode to avoid the mixed content issue. For details on how to enable SSL,
Setting up the
server section in the
Cisco Prime Collaboration
10.0 Provisioning User Guide.
||Under Prime Collaboration
Provisioning Server Setup, specify the IP address of the Prime Collaboration
Provisioning application server that you want to attach to.
protocol and enter the port details.
that you use HTTPS.
The port used
for Prime Collaboration Assurance and Provisioning servers over HTTP is 80; for
Prime Collaboration Assurance over HTTPS is 443 and for Prime Collaboration
Provisioning it is 46443.
Required Ports for Prime
Collaboration for details on the ports used for data transfer.
|| Test the
connectivity of the Prime Collaboration Provisioning server.
attach the Prime Collaboration Provisioning application to Prime Collaboration
Assurance, you must refresh the UI to view the Design and Deploy tabs on the
Provisioning Certificate on the Getting Started page to test the SSL
certificate for Prime Collaboration Provisioning server, if you have selected
the HTTPS protocol.
If you have selected HTTP
protocol, mixed content is displayed on the browser:
On Windows Internet
When you launch the
converged application, the following message appears "Do you want to view only
the web page content that was delivered securely".
If you select "No",
from the pop-up dialog box, the appropriate data is displayed on all of the
Prime Collaboration Provisioning pages.
If you select "Yes"
from the pop-up dialog box, data is not displayed on all of the Prime
Collaboration Provisioning pages. However, with Microsoft IE 9.0 and 10.0,the
security warning is not displayed and the appropriate data is displayed on all
of the Prime Collaboration Provisioning pages.
On Mozilla Firefox:
For the mixed
contents to be displayed on the server, click the Shield icon in the address
bar and select Disable Protection on This Page from the Keep Blocking
- The Prime Collaboration
Provisioning UI is converged with Prime Collaboration Assurance, and the
Provisioning IP address is redirected to Prime Collaboration Assurance
application even though you log in to Prime Collaboration Provisioning
- After you detach Prime
Collaboration Provisioning from Prime Collaboration Assurance, the user roles
that were applicable for Prime Collaboration Provisioning and Prime
Collaboration Assurance in the converged mode also apply for the standalone
- If you want to restart or
shut down the Prime Collaboration Provisioning application, ensure you detach
it from Prime Collaboration Assurance. You can then converge it after the