Cisco Prime Central for Hosted Collaboration Solution 9.2.1 Installation Guide
Appendix B: Prime Central for HCS—Installation Examples
Downloads: This chapterpdf (PDF - 222.0KB) The complete bookPDF (PDF - 2.19MB) | Feedback

Prime Central for HCS—Installation Examples

Table Of Contents

Prime Central for HCS—Installation Examples

Installing Prime Central for HCS—Examples

Installing With Remotely Staged Files

Installing With Locally Staged Files on a Target Machine

Upgrading to Prime Central for HCS—Examples

Upgrading With Remotely Staged Files

Upgrading With Locally Staged Files on the Target Machine


Prime Central for HCS—Installation Examples


This appendix provides examples of the usage of the scripts that were explained in the chapter "Installing Prime Central for HCS 9.2.1". This appendix should be read in conjunction with the scripts provided in the above-mentioned chapter.

The following sections are covered in this appendix:

Installing Prime Central for HCS—Examples

Upgrading to Prime Central for HCS—Examples

Installing Prime Central for HCS—Examples

This section provides examples of installation scripts that you would use while installing Prime Central for HCS. The following topics are covered:

Installing With Remotely Staged Files

Installing Prime CentralExample

This is an example of the usage of the installation script. For more information, see the section Installing Prime Central.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts.

Step 3 Run ./prime_push.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --password cisco123 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@
--ssh-push-key


Installing Event CollectorExample

This is an example of the usage of the installation script. For more information, see the section Installing Event Collector.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./ec_push.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Installing Correlation EngineExample

This is an example of the usage of the installation script. For more information, see the section Installing Correlation Engine.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts.

Step 3 Run ./ce_push.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Installing Service VisualizerExample

This is an example of the usage of the installation script. For more information, see the section Installing Service Visualizer.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./sv_push.py --sv-hostname sv-01.hcslab.com --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Installing Infrastructure MonitoringExample

This is an example of the usage of the installation script. For more information, see the section Installing Infrastructure Monitoring.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./im_push.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --ntp-servers ntp.esl.cisco.com --ssh-push-key --admin-password cisco123 --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123


Installing With Locally Staged Files on a Target Machine

Installing Prime CentralExample

This is an example of the usage of the installation script. For more information, see the section Installing Prime Central.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./prime_install.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --password cisco123 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@


Installing Event CollectorExample

This is an example of the usage of the installation script. For more information, see the section Installing Event Collector.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts.

Step 3 Run ./ec_install.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Installing Correlation EngineExample

This is an example of the usage of the installation script. For more information, see the section Installing Correlation Engine.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts.

Step 3 Run ./ce_install.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com


Installing Service VisualizerExample

This is an example of the usage of the installation script. For more information, see the section Installing Service Visualizer.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./sv_install.py --sv-hostname sv-01.cisco.com --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@


Installing Infrastructure MonitoringExample

This is an example of the usage of the installation script. For more information, see the section Installing Infrastructure Monitoring.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./im_install.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123


Upgrading to Prime Central for HCS—Examples

This section provides examples of installation scripts that you would use while upgrading to Prime Central for HCS 9.2.1. The following topics are covered:

Upgrading With Remotely Staged Files

Upgrading With Locally Staged Files on the Target Machine

Upgrading With Remotely Staged Files

Upgrading Prime CentralExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Prime Central.


Step 1 Log into the staging media VM as root user.

Step 2 Enter cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./prime_upgrade_push.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01.cisco.com --admin-password cisco123 --prime-admin-password Admin123@ --password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Upgrading Event CollectorExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Event Collector.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ec_upgrade_push.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Upgrading Correlation EngineExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Correlation Engine.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ce_upgrade_push.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Upgrading Service VisualizerExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Service Visualizer.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./sv_upgrade_push.py --sv-hostname sv-01.cisco.com --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Upgrading Infrastructure MonitoringExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Infrastructure Monitoring.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./im_upgrade_push.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123 --ssh-push-key


Upgrading With Locally Staged Files on the Target Machine

Upgrading Prime CentralExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Prime Central.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./prime_upgrade.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --admin-password cisco123 --prime-admin-password Admin123@ --password cisco123 --ntp-servers ntp.esl.cisco.com


Upgrading Event CollectorExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Event Collector.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ec_upgrade.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Upgrading Correlation EngineExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Correlation Engine.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_script/upgrade

Step 3 Run ./ce_upgrade.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com


Upgrading Service VisualizerExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Service Visualizer.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./sv_upgrade.py --sv-hostname sv-01 --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Upgrading Infrastructure MonitoringExample

This is an example of the usage of the upgrade script. For more information, see the section Upgrading Infrastructure Monitoring.


Step 1 Log into the staging media VM as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./im_upgrade.py --ec-hostname ec-01 --im-hostname im-01 prime-hostname pc-01 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123