Cisco Prime Central for Hosted Collaboration Solution 9.1.1 Installation Guide
Appendix B: Prime Central for HCS—Installation Examples
Downloads: This chapterpdf (PDF - 223.0KB) The complete bookPDF (PDF - 2.43MB) | Feedback

Prime Central for HCS—Installation Examples

Table Of Contents

Prime Central for HCS—Installation Examples

Installing Prime Central for HCS—Examples

With Remotely Staged Files

With Locally Staged Files on Target Installation Machine

Upgrading to Prime Central for HCS—Examples

With Remotely Staged Files

With Locally Staged Files on the Target Installation Box


Prime Central for HCS—Installation Examples


This appendix provides examples of the usage of the scripts that were explained in the chapter "Installing Prime Central for HCS 9.1.1". This appendix should be read in conjunction with the scripts provided in the above-mentioned chapter.

The following sections are covered in this appendix:

Installing Prime Central for HCS—Examples

Upgrading to Prime Central for HCS—Examples

Installing Prime Central for HCS—Examples

This section provides examples of installation scripts that you would use while installing Prime Central for HCS. The following topics are covered:

With Remotely Staged Files

Prime Central Installer—Example

This is an example of the usage of the installation script. For more information, see the section Prime Central Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./prime_push.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@
--ssh-push-key


Event Collector Installer—Example

This is an example of the usage of the installation script. For more information, see the section Event Collector Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./ec_push.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Correlation Engine Installer—Example

This is an example of the usage of the installation script. For more information, see the section Correlation Engine Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./ce_push.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Service Visualizer Installer—Example

This is an example of the usage of the installation script. For more information, see the section Service Visualizer Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./sv_push.py --sv-hostname sv-01 --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Infrastructure Monitoring Installer—Example

This is an example of the usage of the installation script. For more information, see the section Infrastructure Monitoring Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./im_push.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --ntp-servers ntp.esl.cisco.com --ssh-push-key --admin-password cisco123 --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123


With Locally Staged Files on Target Installation Machine

Prime Central Installer—Example

This is an example of the usage of the installation script. For more information, see the section Prime Central Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./prime_install.py --prime-hostname pc-01 --ec-hostname ec-01 --password cisco123 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@


Event Collector Installer—Example

This is an example of the usage of the installation script. For more information, see the section Event Collector Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./ec_install.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Correlation Engine Installer—Example

This is an example of the usage of the installation script. For more information, see the section Correlation Engine Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./ce_install.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com


Service Visualizer Installer—Example

This is an example of the usage of the installation script. For more information, see the section Service Visualizer Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./sv_install.py --sv-hostname sv-01 --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --prime-admin-password Admin123@


Infrastructure Monitoring Installer—Example

This is an example of the usage of the installation script. For more information, see the section Infrastructure Monitoring Installer.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts

Step 3 Run ./im_install.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --ntp-servers ntp.esl.cisco.com --admin-password cisco123 --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123


Upgrading to Prime Central for HCS—Examples

This section provides examples of installation scripts that you would use while upgrading to Prime Central for HCS 1.1. The following topics are covered:

With Remotely Staged Files

With Locally Staged Files on the Target Installation Box

With Remotely Staged Files

Prime Central Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Prime Central Upgrade.


Step 1 Log in as root user.

Step 2 Enter cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./prime_upgrade_push.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --admin-password cisco123 --prime-admin-password Admin123@ --password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Event Collector Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Event Collector Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ec_upgrade_push.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Correlation Engine Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Correlation Engine Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ce_upgrade_push.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --ssh-push-key


Service Visualizer Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Service Visualizer Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./sv_upgrade_push.py --sv-hostname sv-01 --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com --ssh-push-key


Infrastructure Monitoring Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Infrastructure Monitoring Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./im_upgrade_push.py --ec-hostname ec-01 --im-hostname im-01 --prime-hostname pc-01 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123 --ssh-push-key


With Locally Staged Files on the Target Installation Box

Prime Central Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Prime Central Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./prime_upgrade.py --prime-hostname pc-01 --ec-hostname ec-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --im-hostname im-01 --sv-hostname sv-01 --admin-password cisco123 --prime-admin-password Admin123@ --password cisco123 --ntp-servers ntp.esl.cisco.com


Event Collector Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Event Collector Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./ec_upgrade.py --ec-hostname ec-01 --prime-hostname pc-01 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Correlation Engine Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Correlation Engine Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_script/upgrade

Step 3 Run ./ce_upgrade.py --ce-hostname ce-01.hcslab.com --ec-hostname ec-01.hcslab.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com


Service Visualizer Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Service Visualizer Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./sv_upgrade.py --sv-hostname sv-01 --ec-hostname ec-01 --prime-hostname pc-01 --hcm-f-hostname hcm-f-01 --hcm-f-admin-password cisco-123 --admin-password cisco123 --prime-admin-password Admin123@ --ntp-servers ntp.esl.cisco.com


Infrastructure Monitoring Upgrade—Example

This is an example of the usage of the upgrade script. For more information, see the section Infrastructure Monitoring Upgrade.


Step 1 Log in as root user.

Step 2 Run cd hcm_installer/scripts/hcm_install_scripts/upgrade

Step 3 Run ./im_upgrade.py --ec-hostname ec-01 --im-hostname im-01 prime-hostname pc-01 --admin-password cisco123 --ntp-servers ntp.esl.cisco.com --hcm-f-hostname hcm-f-01 --hcm-f-admin-username admin --hcm-f-admin-password cisco-123