Cisco Network Registrar Installation Guide, 6.3
Preface
Downloads: This chapterpdf (PDF - 71.0KB) The complete bookPDF (PDF - 789.0KB) | Feedback

Preface

Table Of Contents

Preface


Preface


This guide describes how to install Cisco Network Registrar 6.3 on the supported operating systems: Windows, Solaris, and Linux. It is written for the system administrators who will be installing the software, and assumes that you understand your site configuration and the basic steps for installing software. (For information on configuring and managing Network Registrar, refer to the Cisco Network Registrar User's Guide.)

How This Guide Is Organized

The guide is organized into these chapters and appendixes.

Chapter 1

Overview

Introduces Network Registrar and provides critical system information that you must read before installing the software.

Chapter 2

Installing and Upgrading Network Registrar

Describes how to install or upgrade Network Registrar; and how to uninstall it, stop and start servers, and troubleshoot the installation.

Appendix A

Performing a Silent Installation

Explains how to perform a silent installation, upgrade, or uninstallation of the Network Registrar product.

Appendix B

Lab Evaluation Installations

Explains how to install, upgrade, or uninstall Network Registrar if it is being used in a lab environment.


Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html