Cisco Network Analysis Module for Nexus 1010 4.2 Installation and Configuration Guide
About This Guide
Downloads: This chapterpdf (PDF - 328.0 KB) The complete bookPDF (PDF - 1.34 MB) | Feedback

About This Guide

Table Of Contents

About This Guide

Obtaining Documentation and Submitting a Service Request

About This Guide


The purpose of this document is to provide detailed steps to install the Cisco Network Analysis Module (NAM) Virtual Service Blade (VSB) on a Nexus 1010 Virtual Services Appliance, and then configure the NAM.

This document contains the following chapters:

Chapter 1, "Overview"

Chapter 2, "Installing NAM Virtual Blade Software"

Chapter 3, "Configuring ERSPAN for Traffic Visibility"

Chapter 4, "Configuring NetFlow for Traffic Visibility"

Chapter 5, "Configuring and Monitoring the Nexus Virtual Switch as a Managed Device"

Chapter 6, "Troubleshooting"

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.