Installation and Configuration Guide for Cisco WAAS NAM Virtual Blade
About This Guide
Downloads: This chapterpdf (PDF - 331.0KB) The complete bookPDF (PDF - 2.7MB) | Feedback

About This Guide

Table Of Contents

About This Guide

Obtaining Documentation and Submitting a Service Request


About This Guide


Revised: July 21, 2009, OL-19550-01

The purpose of this document is to provide detailed steps to install the NAM VB on a WAAS appliance, configure the NAM VB, and generate useful reports to demonstrate the impact of WAAS in a Proof of Concept (POC).

This document contains the following chapters:

Chapter 1, "Overview"

Chapter 2, "Installing NAM Virtual Blade Software"

Chapter 3, "Configuring Netflow for Traffic Visibility"

Chapter 4, "Configuring NAM -WAAS Integration"

Chapter 5, "Collecting Baseline Information"

Chapter 6, "Generating WAAS Before and After Reports"

Chapter 7, "Backing Up the NAM Virtual Blade"

Chapter 8, "Troubleshooting"

Appendix A, "Using the Recovery CD"

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.