Cisco Prime Network Analysis Module 5.1 Command Reference
NAM Maintenance Partition CLI
Downloads: This chapterpdf (PDF - 41.0KB) The complete bookPDF (PDF - 2.31MB) | Feedback

NAM Maintenance Partition CLI

Table Of Contents

NAM Maintenance Partition CLI


NAM Maintenance Partition CLI


Table A-1 lists the Network Analysis Module maintenance partition commands.

Table A-1 NAM Maintenance Image CLI

Command
Usage

ip address address mask

Sets the NAM IP address.

ip broadcast broadcast-address

Sets the NAM broadcast address.

ip gateway gateway-address

Sets the NAM gateway address.

ip nameserver DNS-server-address1 [DNS-server-address2 [DNS-server-address3]]

Sets up to three DNS server addresses.

ip host host-name

Sets the NAM device hostname.

ip domain domain

Sets the NAM device domain.

show ip

Shows the NAM IP parameters.

show images

Shows images located on the NAM application partition.

show version

Shows the NAM system parameters.

show log upgrade

Shows the upgrade log file.

passwd

Sets the password for the current user.

upgrade ftp-url [--install]

Upgrades the NAM application image.

ping address

Sends echo messages.

clear ip

Removes the NAM network configuration.

clear log upgrade

Clears the log file for the upgrade operation.

logout

Exits the current session.

exit

Exits the current session.

passwd-guest

Sets the password for the guest account.

enable-guest

Enables the guest account.

disable-guest

Disables the guest account.

reset

Reboots the NAM (available in guest account only).

upgrade-bios

Installs a new BIOS image (available in guest account only).