Network Analysis Module Command Reference Guide, 4.2
About This Guide
Downloads: This chapterpdf (PDF - 370.0KB) The complete bookPDF (PDF - 4.3MB) | Feedback

About This Guide

Table Of Contents

About This Guide

Audience

Organization

Related Documentation

Conventions

Obtaining Documentation and Submitting a Service Request


About This Guide


This preface describes the audience, organization, and conventions of this publication, and provides information on how to obtain related documentation.

Audience

This publication is for experienced network administrators who are responsible for configuring and maintaining the following:

Catalyst 6500 series switches, the Catalyst 6500 series and Cisco 7600 series Network Analysis Module (NAM)

WS-SVC-NAM-1

WS-SVC-NAM-1-250S

WS-SVC-NAM-2

WS-SVC-NAM-2-250S

Cisco NAM 2200 Series appliances

Cisco NAM 2204 appliance

Cisco NAM 2220 appliance

Cisco Branch Routers Series Network Enhanced Modules, Network Analysis Module (NME-NAM)

Cisco WAAS Network Analysis Module Virtual Blade

WAVE-574 appliance

WAE-674 appliance

Cisco Nexus 1010 Virtual Services Appliance

N1K-C1010 appliance

Organization

This publication is organized as follows:

Chapter
Title
Description

Chapter 1

Command-Line Interface

Describes how to log in to the NAM from the switch supervisor engine, information about the two CLI command modes (the command mode and subcommand mode) and information about NAM CLI edit and create modes.

Chapter 2

NAM CLI Commands: alarm event - ip http secure install certificate

Chapter 2 lists CLI commands alphabetically and provides detailed information about the commands

Chapter 3

NAM CLI Commands: ip http secure port - monitor nbar

Chapter 3 lists CLI commands alphabetically and provides detailed information about the commands

Chapter 4

NAM CLI Commands: monitor matrix - preferences

Chapter 4 lists CLI commands alphabetically and provides detailed information about the commands

Chapter 5

NAM CLI Commands: esp-null-heuristic - show hosts

Chapter 5 lists CLI commands alphabetically and provides detailed information about the commands

Chapter 6

NAM CLI Commands: show inventory - show rmon buffer

Chapter 6 lists CLI commands alphabetically and provides detailed information about the commands

Chapter 7

NAM CLI Commands: show rmon channels - web-user

Chapter 7 lists CLI commands alphabetically and provides detailed information about the commands

Appendix A

NAM Maintenance Partition CLI

Lists the NAM maintenance partition commands.

Appendix B

Acronyms

Defines the acronyms used in this publication.


Throughout this document the following general references apply:

A reference to the Cisco NAM 2200 Series appliance applies to either of the following:

Cisco NAM 2204 appliance

Cisco NAM 2220 appliance

A reference to a NAM-1 or NAM-2 device indicates any of the following modules:

WS-SVC-NAM-1

WS-SVC-NAM-1-250S

WS-SVC-NAM-2

WS-SVC-NAM-2-250S

A reference to an NME-NAM device indicates any of the following modules:

NME-NAM

NME-NAM-80S

NME-NAM-120S

A reference to a Virtual Service Blade (VSB) can indicate any of the following:

WAVE-574

WAE-674

N1K-C1010

Related Documentation

The Catalyst 6500 series switch Cisco IOS documentation set includes these documents:

Release Notes for Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module

Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module Installation and Configuration Note

User Guide for the Network Analysis Module Traffic Analyzer, Release 4.2

Catalyst 6500 Series Switch Module Installation Guide

Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide

Catalyst 6500 Series Switch Cisco IOS System Message Guide

Release Notes for Catalyst 6500 Series Switch Cisco IOS Software, Release X.X

For more information about the other platforms that run with the Network Analysis Module Traffic Analyzer Software, see the following URL:

http://www.cisco.com/en/US/products/sw/cscowork/ps5401/tsd_products_support_series_home.html

For more information about the WAAS NAM Virtual Services Blade, see the following URL:

http://www.cisco.com/en/US/products/ps10506/tsd_products_support_install_and_upgrade.html

For more information about the Cisco Nexus 1000v NAM Virtual Services Blade, see the following URL:

http://preview.cisco.com/en/US/products/ps10846/tsd_products_support_series_home.html

The Cisco IOS documentation set includes these documents:

Configuration Fundamentals Configuration Guide

Command Reference

For information about MIBs, refer to this URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

For information about the Support Information for Platforms and Cisco IOS Software Images, use the Cisco Feature Navigator. The Cisco Feature Navigator allows you to find information about platform support and Cisco IOS software image support. Access the Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Conventions

This document uses the following conventions:

Convention
Description

boldface font

Commands, command options, and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[   ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars. Braces can also be used to group keywords and/or arguments; for example, {interface interface type}.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

screen font

Terminal sessions and information the system displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

^

The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.

<   >

Nonprinting characters, such as passwords are in angle brackets.

[   ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.


Notes use the following conventions:


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.


Cautions use the following conventions:


Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.