Network Analysis Module Command Reference Guide, 4.0
NAM CLI Commands: show inventory - show rmon buffer
Downloads: This chapterpdf (PDF - 558.0KB) The complete bookPDF (PDF - 3.66MB) | Feedback

NAM CLI Commands: show inventory - show rmon buffer

Table Of Contents

NAM CLI Commands:
show inventory - show rmon buffer

show inventory

show ip

show log config

show log patch

show log upgrade

show memory

show metric export

show monitor addrmap

show monitor art

show monitor diffserv host

show monitor diffserv matrix

show monitor diffserv pdist

show monitor diffserv stats

show monitor etherstats

show monitor etherstats on-switch

show monitor history

show monitor hlhost

show monitor hlmatrix

show monitor host

show monitor ifstats

show monitor matrix

show monitor nbar

show monitor pdist

show monitor priostats

show monitor protocol

show monitor protocol all

show monitor protocol auto-learned settings

show monitor urlcollection

show monitor urlfilter

show monitor vlanstats

show monitor vlanstats on-switch

show monitor voice

show nam data-source

show patches

show preferences

show protocol-feature

show remote-storage

show rmon buffer


NAM CLI Commands:
show inventory - show rmon buffer


This chapter describes the following NAM CLI commands:

show inventory

show ip

show log config

show log patch

show log upgrade

show memory

show metric export

show monitor addrmap

show monitor art

show monitor diffserv host

show monitor diffserv matrix

show monitor diffserv pdist

show monitor diffserv stats

show monitor etherstats

show monitor etherstats on-switch

show monitor history

show monitor hlhost

show monitor hlmatrix

show monitor host

show monitor ifstats

show monitor matrix

show monitor nbar

show monitor pdist

show monitor priostats

show monitor protocol

show monitor protocol all

show monitor protocol auto-learned settings

show monitor urlcollection

show monitor urlfilter

show monitor vlanstats

show monitor vlanstats on-switch

show monitor voice

show nam data-source

show patches

show preferences

show protocol-feature

show remote-storage

show rmon buffer

show inventory

To display the system inventory information for a NAM device, use the show inventory command.

show inventory

Syntax Description

This command has no arguments or keywords.

Defaults

No default behavior or values.

Command Modes

Command mode

Usage Guidelines

The show inventory command allows you to view the UDI for a NAM device. This identity information is stored in the NAM device's non-volatile memory.

PID—Product identification (ID) number of the device

VID—Version ID of the device. Displays as 0 if the version number is not available.

SN—Serial number of the device

Examples

The following example shows the system inventory information:

root@nam.cisco.com# show inventory
PID:WS-SVC-NAM-2  VID:V05  SN:SAD1151075B

show ip

To display the NAM IP parameters, use the show ip command.

show ip

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM IP parameters:

Root@localhost# show ip
IP address:             101.10.11.189
Subnet mask:            255.255.255.255
IP Broadcast:           111.20.255.255
DNS Name:               namlab-kom9.cisco.com
Default Gateway:        111.20.98.125
Nameserver(s):          111.69.2.135
HTTP server:            Enabled
HTTP secure server:     Disabled
HTTP port:              80
HTTP secure port:       443
TACACS+ configured:     No
Telnet:                 Enabled
SSH:                    Disabled

Related Commands

ip address
ip broadcast
ip gateway
ip host
ip hosts add
ip hosts delete
ip http port
ip http secure generate
ip http secure server
ip http tacacs+
ip interface

show log config

To display the maintenance image configuration import log entries, use the show log config command.

show log config

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image import log entries:

Root@localhost# show log config

Related Commands

config clear
show log upgrade
upgrade

show log patch

To display the patch log entries, use the show log patch command.

show log patch

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image import log entries:

Root@localhost# show log patch
2005/01/17 21:11 Sucessfully downloaded ftp://guest@namlab-pc1//home/guest/patch
_rpms/nam-app.3-4.cryptoK9.patch.1-0.bin.
2005/01/17 21:11 Patch nam-app.3-4.cryptoK9.patch.1-0.bin signature verified.
2005/01/17 21:11 Successfully applied patch /usr/local/nam/patch/workdir/nam-app
.3-4.cryptoK9.patch.1-0.bin.

Related Commands

config clear
show log upgrade
upgrade

show log upgrade

To display the maintenance image upgrade log entries, use the show log upgrade command.

show log upgrade

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image upgrade entries:

Root@localhost# show log upgrade
Fri Aug 23 10:32:27 2002 : path: ftp://namlab-pc1/pub/rmon/MP-KPLUS
 Fri Aug 23 10:32:27 2002 : file: mp-dev.1-2-0-5.bin
 Fri Aug 23 10:32:27 2002 : extn: .gz
 Fri Aug 23 10:32:27 2002 : Downloading the image...
 Fri Aug 23 10:32:28 2002 : Successfully downloaded the image...
 Fri Aug 23 10:32:28 2002 : Uncompressing the image...
 Fri Aug 23 10:32:29 2002 : Finished uncompressing the file /tmp/mp-dev.1-2-0-5. bin.gz.
 Fri Aug 23 10:32:29 2002 : Successfully uncompressed the image.
 Fri Aug 23 10:32:29 2002 : Verifying the image...
 Fri Aug 23 10:32:29 2002 : opening file /tmp/mp-dev.1-2-0-5.bin.ver
 Fri Aug 23 10:32:30 2002 : Successfully verified the image.
 Fri Aug 23 10:32:30 2002 : Partition '/dev/hda1' unmounted.
 Fri Aug 23 10:32:30 2002 : Applying the Maintenance image.
 Fri Aug 23 10:32:30 2002 : This process may take several minutes...
 Fri Aug 23 10:32:30 2002 : Writing mbr...
 Fri Aug 23 10:32:30 2002 : Successfully wrote mbr.
 Fri Aug 23 10:32:30 2002 : Number of Sectors: 31
 Fri Aug 23 10:32:30 2002 : Writing grub and maint image.
 Fri Aug 23 10:33:18 2002 : Successfully wrote the maint image.
 Fri Aug 23 10:33:18 2002 : Partition '/dev/hda1' mounted.
 Fri Aug 23 10:33:18 2002 : Performing post install...
 Fri Aug 23 10:33:18 2002 : File /usr/local/nam/falcon_version copied to /mnt/mp 
/boot/appl/daughter_card.info.
 Fri Aug 23 10:33:18 2002 : Maintenance image upgrade completed successfully.

Related Commands

upgrade

show memory

To display the installed memory, available memory, and the memory being used by the system, use the show memory command.

show memory

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM memory:

Root@localhost# show memory
Installed:      858 MB
Available:      240 MB
System Usage:   617 MB

Related Commands

show bios

show metric export

To show metric export configuration, use the show metric export command.

show metric export

Syntax Description

This command has no arguments or keywords.

Defaults

No default behavior or values.

Command Modes

Command mode

Examples

The following example shows the metric export configuration:

root@nam.cisco.com# show metric export
Metric export: enabled
Host: 10.0.0.1
Port: 9995
Export non-WAAS traffic: enabled

show monitor addrmap

To display the address map collection configuration, use the show monitor addrmap command.

show monitor addrmap [control-index]

Syntax Description

control-index

(Optional) Specifies the address map control index. Range is 1-65535.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the address map collection configuration:

Root@localhost# show monitor addrmap
Control Index:                 40042
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Related Commands

monitor addrmap

show monitor art

To display all of the ART collection configurations, use the show monitor art command.

show monitor art [control-index]

Syntax Description

control-index

(Optional) Specifies the collection control index.


Defaults

The control index variable range is 1 through 65535.

Command Modes

Command mode

Examples

This example shows how to display all of the ART collections:

Console> show monitor art
Control Index:                 18880
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Time Remaining:                2197
Response Time 1:               5
Response Time 2:               15
Response Time 3:               50
Response Time 4:               100
Response Time 5:               200
Response Time 6:               500
Response Timeout:              3000
Maximum Entries:               500


Related Commands

monitor art

show monitor diffserv host

To display all of the differentiated services host collections, use the show monitor diffserv host command.

show monitor diffserv host [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service host collection:

root@nam# show monitor diffserv host
Control index:                 17600
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 24600
IPv4 prefix length:            32
IPv6 prefix length:            128

Control index:                 23917
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 16917
IPv4 prefix length:            32
IPv6 prefix length:            128

root@nam#

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv matrix

To display all of the differentiated services matrix collections, use the show monitor diffserv matrix command.

show monitor diffserv matrix [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service matrix collection:

root@nam# show monitor diffserv matrix 5493
Control index:                 5493
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   3000
Profile index:                 24600

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv pdist

To display all of the differentiated services protocol distribution collections, use the show monitor diffserv pdist command.

show monitor diffserv pdist [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service protocol distribution collection:

root@nam# show monitor diffserv pdist 35198
Control index:                 35198
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 16917

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv stats

To display all of the differentiated services statistics collections, use the show monitor diffserv stats command.

show monitor diffserv stats [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the statistics collection:

root@nam# show monitor diffserv stats 6169
Control index:                 6169
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Profile index:                 24600

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor etherstats

To display all of the Ethernet statistics collection configurations, use the show monitor etherstats command.

show monitor etherstats [control-index]

Syntax Description

control-index

(Optional) Displays Ethernet statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the Ethernet statistics collection configurations:

Root@localhost#  show monitor etherstats
Control index:                 53750
Data source:                   allspan
Owner:                         LocalMgr
Status:                        1

Related Commands

monitor etherstats

show monitor etherstats on-switch

To display the supervisor engine mini-RMON statistics polling on the NAM, use the show monitor etherstats on-switch command.

show monitor etherstats on-switch

Syntax Description

This command has no arguments or keywords.

Defaults

The control index is random.

Command Modes

Command mode

Usage Guidelines

This command is supported only on the NAM-1 and NAM-2. This command is not supported on the NM-NAM.

Examples

This example shows how to display the supervisor engine mini-RMON statistics polling on the NAM:

root@localhost.cisco.com# show monitor etherstats on-switch
Supervisor mini-rmon statistics collection is enabled.

Related Commands

show monitor etherstats

show monitor history

To display all of the history collection configurations, use the show monitor history command.

show monitor history [control-index]

Syntax Description

control-index

(Optional) Displays history collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the history collection configurations:

Root@localhost# show monitor history
Control index:                 9900
Data source:                   allspan
Owner:                         LocalMgr
Status:                        1
Buckets:                       50
Interval:                      1800

Related Commands

monitor etherstats

show monitor hlhost

To display all of the host layer host collection configurations, use the show monitor hlhost command.

show monitor hlhost [control-index]

Syntax Description

control-index

(Optional) Displays host layer host collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host layer host collection configurations:

Root@localhost# show monitor hlhost
Control Index:                 7434
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Network Layer Max Entries:     Max Possible
Application Layer Max Entries: Max Possible

Related Commands

monitor hlhost

show monitor hlmatrix

To display all of the host layer matrix collection configurations, use the show monitor hlmatrix command.

show monitor hlmatrix [control-index]

Syntax Description

control-index

(Optional) Displays host layer matrix collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host layer matrix collection configurations:

Root@localhost# show monitor hlmatrix
Control Index:                 20990
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Network Layer Max Entries:     Max Possible
Application Layer Max Entries: Max Possible

Related Commands

monitor hlmatrix

show monitor host

To display all of the host collection configurations, use the show monitor host command.

show monitor host [control-index]

Syntax Description

control-index

(Optional) Displays host collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host collection configurations:

Root@localhost# show monitor host
Control Index:                 38426
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Related CommandsRoot@localhost#

monitor host

show monitor ifstats

To display the interface statistics collection status, use the show monitor ifstats command.

show monitor ifstats

Syntax Description

This command has no arguments or keywords.

Defaults

The control index is random.

Command Modes

Command mode

Usage Guidelines

This command is supported only on the NM-NAM.

Examples

This example shows how to display the interface statistics collection status:

root@localhost.cisco.com# show monitor ifstats
Supervisor ifstats collection is enabled.

Related Commands

monitor ifstats

show monitor matrix

To display all of the matrix collection configurations, use the show monitor matrix command.

show monitor matrix [control-index]

Syntax Description

control-index

(Optional) Displays matrix collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the matrix collection configurations:

Root@localhost#  show monitor matrix
Control Index:                 37030
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor matrix

show monitor nbar

To display the NBAR collection configuration status, use the show monitor nbar command.

show monitor nbar

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NBAR collection configuration status:

Root@localhost#  show monitor nbar
nbar collection is enabled
Root@localhost#

Related Commands

monitor nbar

show monitor pdist

To display all of the protocol distribution collection configurations, use the show monitor pdist command.

show monitor pdist [control-index]

Syntax Description

control-index

(Optional) Displays protocol distribution collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol distribution collection configurations:

Root@localhost#  show monitor pdist
Control Index:                 46451
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Control Index:                 56899
Data Source:                   dataport3
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor pdist

show monitor priostats

To display all of the priority statistics collection configurations, use the show monitor priostats command.

show monitor priostats [control-index]

Syntax Description

control-index

(Optional) Displays priority statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the priority statistics collection configurations:

Root@localhost#  show monitor priostats 
Control Index:                 9572
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor priostats

show monitor protocol

To display all user-modified and user-defined protocols, use the show monitor protocol command.

show monitor protocol

show monitor protocol prot-specifiers

Syntax Description

prot-specifiers

Displays a specific protocol with the protocol specifier set in the monitor protocol command.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol configurations:

Root@localhost#  show monitor protocol
No modified protocol directory entries exist.
Root@localhost#

Related Commands

monitor protocol

show monitor protocol all

To display all of the protocols in the protocol directory, use the show monitor protocol all command.

show monitor protocol all

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol configurations:

Root@localhost#  show monitor protocol all
Control Index:                 46232
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor protocol

show monitor protocol auto-learned settings

To display the automatically learned protocol settings, use the show monitor protocol auto-learned settings command.

show monitor protocol auto-learned settings

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the auto-learned protocol settings:

Root@localhost#  show monitor protocol auto-learned settings
Protocol auto-learn:     Enabled
Max number of entries:   100
Max tcp port:            6553
Exclude tcp port range:  (Not Configured)
Max udp port:            6553
Exclude udp port range:  (Not Configured)
Root@localhost#

Related Commands

monitor protocol

show monitor urlcollection

To display the URL collection configuration, use the show monitor urlcollection command.

show monitor urlcollection

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the URL collection statistics:

root@localhost# show monitor urlcollection
root@localhost# 

Related Commands

monitor urlcollection

show monitor urlfilter

To display the URL filter configuration, use the show monitor urlfilter command.

show monitor urlfilter [control-index]

Syntax Description

control-index

(Optional) Specifies the URL filter control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the URL filter configuration:

root@localhost# show monitor urlflter
root@localhost# 

Related Commands

monitor urlfilter

show monitor vlanstats

To display all of the VLAN statistics collection configurations, use the show monitor vlanstats command.

show monitor vlanstats [control-index]

Syntax Description

control-index

(Optional) Displays VLAN statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the VLAN statistics collection configurations:

Root@localhost#  show monitor vlanstats
Control Index:                 46232
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#  

Related Commands

monitor vlanstats

show monitor vlanstats on-switch

To display the supervisor engine VLAN statistics collection configuration status, use the show monitor vlanstats on-switch command.

show monitor vlanstats on-switch

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the VLAN statistics collection configuration status:

Root@localhost#  show monitor vlanstats on-switch
Supervisor vlanstats collection is enabled.
Root@localhost#  

Related Commands

monitor vlanstats on-switch

show monitor voice

To display the voice configurations, use the show monitor voice command.

show monitor voice [protocol]

Syntax Description

protocol

(Optional) Displays voice collections by the specified protocol, either H323, SCCP, SIP, or MGCP.


Defaults

This command has no default settings.

Command Modes

Command mode

Usage Guidelines

The Media Gateway Control Protocol (MGCP) option is specific to the Network Analysis Module (NAM) software release running on network modules in the Cisco 2600, 3600, 3700 routers.

Examples

This example shows how to display the voice configurations: REPLACE3 WITH NEW RETURNED DATA

Root@localhost#  show monitor voice
H.323 Voice Monitoring:                 Enabled
Number of phone table rows:             200
Number of call table rows:              200
Number of top packet jitter rows:       5
Number of top packet loss rows:         5

SCCP Voice Monitoring:                  Disabled
Number of phone table rows:             300
Number of call table rows:              300
Number of top packet jitter rows:       5
Number of top packet loss rows:         5Console>

MGCP voice monitoring:                 Disabled
Number of phone table rows:            150
Number of call table rows:             150
Number of top packet jitter rows:      7
Number of top packet loss rows:        7

This example shows how to only display information about the MGCP configuration:

Root@localhost# show monitor voice mgcp
MGCP voice monitoring:                 Disabled
Number of phone table rows:            150
Number of call table rows:             150
Number of top packet jitter rows:      7
Number of top packet loss rows:        7

Related Commands

monitor voice h.323
monitor voice mgcp
monitor voice sccp
monitor voice sip

show nam data-source

To display all of the NAM data sources, use the show nam data-source command.

show nam data-source

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM data sources:

root@localhost# show nam data-source
external
internal
netflow
nde-10.10.10.10
nde-if-fa0/0
nde-if-fa0/1
nde-if-atm0/2/0.0-aal5_layer
nde-if-atm0/2/0-aal5_layer
nde-if-atm0/2/1.0-aal5_layer
nde-if-atm0/2/1-aal5_layer
nde-if-atm0/3/1.0-aal5_layer
nde-if-atm0/3/1-aal5_layer
root@localhost# 

Related Commands

mpls data-source vc
mpls data-source vrf
mpls data-source label

show patches

To display all of the installed patches, use the show patches command.

show patches

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the installed patches:

Root@localhost# show patches

Related Commands

patch

show preferences

To display the configured preferences for your screen, use the show preferences command.

show preferences

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the configured screen preferences:

root@localhost.cisco.com# show preferences
Entries per screen:   15
Refresh interval:     60 secs
Number of graph bars: 10
Hostname resolution:  Disabled
Data displayed in:    Bytes
Format large number:  No
Number notation:      Commas-dot
root@localhost.cisco.com# 

Related Commands

preferences

show protocol-feature

To display the status of ESP-NULL heuristic parsing, use the show protocol-feature command.

show protocol-feature

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the status of ESP-NULL heuristic parsing:

root@localhost.cisco.com# show protocol-feature
Protocol Feature: 
   ESP-NULL: heuristically parsing disabled. 

root@localhost.cisco.com#

Related Commands

protocol esp-null-heuristic

show remote-storage

To display the network storage target for report and capture date, use the show remote-storage command.

show remote-storage

Syntax Description

This command has no keywords or arguments.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the web user information:

root@localhost.cisco.com# show remote-storage
Description:    iscsi-2
  Type:         iscsi
  Server:       172.20.103.60
  IQN Name:     iqn.2000-05.com.wasabisystems.storagebuilder:cxr1-2|1
  Status:       Mounted
 
Description:    iscsi-3
  Type:         iscsi
  Server:       172.20.103.60
  IQN Name:     iqn.2000-05.com.wasabisystems.storagebuilder:cxr1-3|1
  Status:       Mounted
 
Description:    namlab-pc8
  Type:         nfs
  Server:       namlab-pc8.cisco.com
  Directory:    /home/kluu
  Status:       Mounted
 
root@localhose.cisco.com#

Related Commands

remote-storage nfs

show rmon buffer

To display the RMON buffers, use the show rmon buffer command.

show rmon buffer [control-index]

Syntax Description

control-index

(Optional) Displays the buffer collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the RMON channels and buffers:

Root@localhost# show rmon buffer
Index:                9791
Channel index:        21054
Full action:          Lock when full
Capture slice size:   1500 bytes
Download slice size:  1500 bytes
Download offset:      0
Max octets requested: 51200000 bytes
Owner:                LocalMgr

Related Commands

rmon buffer
rmon channel
rmon filter