Network Analysis Module Command Reference Guide, 3.6
S Commands
Downloads: This chapterpdf (PDF - 480.0KB) The complete bookPDF (PDF - 2.52MB) | Feedback

22

Table Of Contents

rmwebusers

show access-log

show alarm event

show alarm mib

show alarm voice

show application group

show audit-trail

show autostart

show bios

show cdp settings

show certificate

show certificate-request

show configuration

show custom-filter capture

show custom-filter decode

show date

show diffserv aggregate

show diffserv profile

show email

show entity

show ftp

show hosts

show ip

show log config

show log patch

show log upgrade

show memory

show monitor addrmap

show monitor art

show monitor diffserv host

show monitor diffserv matrix

show monitor diffserv pdist

show monitor diffserv stats

show monitor etherstats

show monitor etherstats on-switch

show monitor history

show monitor hlhost

show monitor hlmatrix

show monitor host

show monitor ifstats

show monitor matrix

show monitor nbar

show monitor pdist

show monitor priostats

show monitor protocol

show monitor protocol all

show monitor protocol auto-learned settings

show monitor urlcollection

show monitor urlfilter

show monitor vlanstats

show monitor vlanstats on-switch

show monitor voice

show nam data-source

show patches

show preferences

show protocol-feature

show remote-storage

show rmon buffer

show rmon channels

show rmon filters

show rxcounters

show snmp

show syslog-settings

show system-alerts

show tech-support

show time

show trap-dest

show version

show web-publication

show web-users

shutdown

snmp

supervisor address

syslog

syslog mib

syslog remote-server

syslog system


22

rmwebusers

To remove all web users from the local web user database, use the rmwebusers command.

rmwebusers

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to remove web users from the local web user database:

root@localhost.cisco.com# rmwebusers
 
WARNING:Doing this will stop the web server and remove
all locally defined web users from web user database.
 
Are you sure you want to continue (y/n) [n]? y
 
Disabling HTTP server...
Successfully disabled HTTP server.
 
All locally defined web users have been
removed from web user database.
root@localhost.cisco.com#

Related Commands

show web-users

show access-log

To display the web access log, use the show access-log command.

show access-log

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the web access log:

Root@localhost# show access-log
11 Mar 2003, 12:23:38   152.20.27.182   -       Access denied (no login session)
 /error.php
11 Mar 2003, 12:23:39   152.20.27.182   -       Access denied (no login session)
 /error.php
11 Mar 2003, 12:23:39   152.20.27.182   -       Access denied (no login session)
 /error.php
11 Mar 2003, 12:23:39   152.20.27.182   -       Access denied (no login session)
 /error.php

show alarm event

To display NAM event alarms, use the show alarm event command.

show alarm event [control-index]

Syntax Description

control-index

(Optional) Specifies the event control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM system event alarms:

root@nam# show alarm event 58874
Index:       58874
Description: Capture Stop
Type:        None
Community:
Owner:       LocalMgr

root@nam# no alarm event 58874
Successfully deleted the event.
root@nam#

Related Commands

alarm event
alarm mib
alarm voice

show alarm mib

To display NAM MIB alarms, use the show alarm event mib command.

show alarm mib [control-index]

Syntax Description

control-index

(Optional) Specifies the event control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM system event alarms:

root@nam# show alarm mib 4800
Index:               4800
Polling interval:    60 secs
Variable:            nlHostInPkts.1.0.1.4.172.20.98.129
Sample type:         Absolute
Startup:             Rising & falling
Rising threshold:    50 Pkts
Falling threshold:   40 Pkts
Rising event index:  3816
Falling event index: 3816
Owner:               LocalMgr

root@nam# no alarm mib 4800
Successfully deleted the alarm.
root@nam#


Related Commands

alarm event
alarm mib
alarm voice

show alarm voice

To display NAM voice alarms, use the show alarm voice command.

show alarm voice

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM system event alarms:

root@nam# show alarm voice
SCCP:	
        Jitter alarm:          Disabled
        Packet lost alarm:     Disabled
        Jitter threshold:      30 msecs
        Packet lost threshold: 5%

H.323:
        Jitter alarm:          Disabled
        Packet lost alarm:     Disabled
        Jitter threshold:      150 msecs
        Packet lost threshold: 5%

MGCP:
        Jitter alarm:          Disabled
        Packet lost alarm:     Disabled
        Jitter threshold:      30 msecs
        Packet lost threshold: 5%
root@nam#

Related Commands

alarm event
alarm mib
alarm voice

show application group

To display application groups, use the show application group command.

show application group [group-name]

Syntax Description

group-name

(Optional) Specifies the application group name.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display application groups:

root@namlab-kom10.cisco.com# show application group
Application Group: File-Transfer
    Number of Protocols: 5
      - ftp
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.21.4.0.1.0.0
      - ftp-data
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.20.4.0.1.0.0
      - ftps
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.3.222.4.0.1.0.0
      - ftps-data
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.3.221.4.0.1.0.0
      - tftp
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.0.69.4.0.1.0.2

Application Group: Peer-to-Peer
    Number of Protocols: 12
      - gnutella(6346)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.24.202.4.0.1.0.0
      - gnutella(6347)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.24.203.4.0.1.0.0
      - fasttrack(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.4.190.4.0.1.0.0
      - fasttrack(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.4.190.4.0.1.0.0
      - winmx(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.24.113.4.0.1.0.
      - winmx(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.26.43.4.0.1.0.0
      - edonkey(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.18.57.4.0.1.0.0
      - edonkey(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.18.53.4.0.1.0.0
      - hotline
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.21.124.4.0.1.0.0
      - soulseek
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.8.186.4.0.1.0.0
      - directconnect
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.1.155.4.0.1.0.0
      - bittorrent
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.26.225.4.0.1.0.0

Application Group: Web
    Number of Protocols: 2
      - http
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.80.4.0.1.0.0
      - https
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.1.187.4.0.1.0.0

Application Group: Database
    Number of Protocols: 9
      - sql*net
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.66.4.0.1.0.0
      - sqlserv(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.0.118.4.0.1.0.0
      - sqlserv(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.118.4.0.1.0.0
      - ms-sql-mon(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.5.154.4.0.1.0.0
      - ms-sql-mon(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.5.154.4.0.1.0.0
      - ms-sql-ser(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.5.153.4.0.1.0.0
      - ms-sql-ser(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.5.153.4.0.1.0.0
      - oracle-server(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.5.245.4.0.1.0.0
      - oracle-server(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.5.245.4.0.1.0.0

Application Group: email
    Number of Protocols: 7
      - smtp
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.25.4.0.1.0.0
      - smtps
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.1.209.4.0.1.0.0
      - pop3(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.0.110.4.0.1.0.0
      - pop3(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.110.4.0.1.0.0
      - pop3s
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.3.227.4.0.1.0.0
      - imap2
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.0.143.4.0.1.0.0
      - imaps
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.3.225.4.0.1.0.0

Application Group: Multi-Media
    Number of Protocols: 9
      - h225
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.6.184.4.0.1.0.0
      - h245
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.6.182.4.0.1.0.0
      - h323-gatekeeper
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.6.183.4.0.1.0.0
      - rtp
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.125.0.4.0.1.0.0
      - rtcp
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.125.1.4.0.1.0.0
      - sip(udp)
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.19.196.4.0.1.0.
      - sip(tcp)
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.19.196.4.0.1.0.0
      - mgcp
        16.1.0.0.1.0.0.8.0.0.0.0.17.0.0.9.123.4.0.1.0.0
      - sccp
        16.1.0.0.1.0.0.8.0.0.0.0.6.0.0.7.208.4.0.1.0.0

Related Commands

application group

show audit-trail

To display the audit trail configuration, use the show audit-trail command.

show audit-trail

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the audit trail configuration:

root@hostname.cisco.com# show audit-trail
Audit trail is enabled.
root@hostname.cisco.com# 

Related Commands

audit-trail enable

show autostart

To display autostart collections, use the show autostart command.

show autostart

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the autostart collections:

Root@localhost# show autostart
etherstats disable
addressmap disable
priostats disable
vlanstats disable
art disable

Related Commands

autostart

show bios

To display BIOS information, use the show bios command.

show bios

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the module's BIOS information:

Root@localhost# show bios
BIOS Information:
    Vendor: Phoenix Technologies Ltd.
    BIOS Version: 4.0-Rel 6.0.4
    BIOS Start Addr Seg: 0xe9d2
    BIOS Release Date: 05/28/2002
    BIOS ROM Size: 512K

System Info
    Manufacturer: Cisco Systems, Inc
    Product Name: Catalyst LineCard
    Version: 2 Processors
    Serial Number: 000000000
    UUID: 00000000000000000000000000000000

System Enclosure Info
    Manufacturer: Cisco Systems, Inc.
    Version:
    Serial Number: 000000000
    Asset Tag: No Asset Tag

show cdp settings

To display the current Cisco Discovery Protocol (CDP) settings, use the show cdp settings command.

show cdp settings

Syntax Description

This command has no arguments or keywords

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

To display the current CDP settings:

root@nam# show cdp settings
CDP is disabled
    Message Interval:   60
    Message Hold Time:  180

root@nam#

Related Commands

cdp enable
cdp hold-time
cdp interval

show certificate

To display the installed certificate, use the show certificate command.

show certificate

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display certificate information:

Root@localhost# show certificate
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

Related Commands

show certificate-request

show certificate-request

To display the certificate-signing requests, use the show certificate-request command.

show certificate-request

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the certificate-signing requests:

Root@localhost# show certificate-request

Related Commands

show certificate

show configuration

To display the NAM running configuration, use the show configuration command.

show configuration

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Usage Guidelines

The following configurations are not included in the generated configuration file:

Reports

CLI users

Supervisor engine community strings

Examples

This example shows how to display the NAM running configuration:

Root@localhost# show configuration
!
! NAM running configuration
!
! Date: Thu Jan  9 09:23:31 2003
!
ip http tacacs+ disable
!
custom-filter capture
  filter-name "cli_origin_capture"
  description "came from the cli"
  protocol "6 1000001 800 2f 800 6 50 0 1 0 0 0 0"
  exit
!
custom-filter decode
  filter-name "cli_origin"
  protocol http
  exit
!
web-user
  user-name admin
  account-mgmt enable
  system-config enable
  capture enable
  alarm-config enable
  collection-config enable
  en-password "YWRtaW4K"
  exit
!
preferences
  entries-per-screen 25
  refresh-interval 15
  graph-bars 10
  resolve-hostname enable
  exit
!
syslog
  mib local enable
  mib remote disable
  voice local enable
  voice remote disable
  system debug enable
  system local enable
  system remote disable
  exit
!
alarm voice
  protocol H.323
  jitter-alarm disable
  pkt-loss-alarm disable
  jitter-threshold 150
  pkt-loss-threshold 5
  exit
!
alarm event
  index 7763
  description Capture Start
  cancel
!
alarm mib
  index 63547
  variable nlHostInPkts.9939.0.1.4.10.0.0.1
  interval 60
  sample-type absolute
  startup-alarm rising
  rising-threshold 10
  falling-threshold 20
  rising-event 63547
  falling-event 63547
  owner LocalMgr
  exit
!
rmon buffer
  index 47654
  channel-index 22838
  full-action lock
  capture-slice 1500
  download-slice 1500
  download-offset 0
  size 51200000
  owner LocalMgr
  exit
!
end

Related Commands

config clear

show custom-filter capture

To display the capture filters, use the show custom-filter capture command.

show custom-filter capture [filter-name]

Syntax Description

filter-name

(Optional) Sets the capture filter name.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the capture filters:

Root@localhost# show custom-filter capture cli_origin_capture

Related Commands

custom-filter capture

show custom-filter decode

To display the decode filters, use the show custom-filter decode command.

show custom-filter decode [filter-name]

Syntax Description

filter-name

(Optional) Sets the decode filter name.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the decode filters:

Root@localhost# show custom-filter decode cli_origin

Related Commands

custom-filter decode

show date

To display the current date and time, use the show date command.

show date

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the current date and time:

Root@localhost# show date
Thu Jan 09 09:38:01 2003

Related Commands

show time
time

show diffserv aggregate

To display all of the differentiated services aggregate configurations for all the data sources and profiles, use the show diffserv aggregate command.

show diffserv aggregate [control-index]

Syntax Description

control-index

(Optional) Aggregate ID.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differentiated service configurations:

Root@localhost# show diffserv aggregate
Control index:                 23723
Description:                   VoIP-TEst
Owner:                         LocalMgr
Status:                        1

Control index:                 31645
Description:                   VoIP
Owner:                         LocalMgr
Status:                        1

Control index:                 41657
Description:                   DragonBallZ
Owner:                         LocalMgr
Status:                        1

Control index:                 47739
Description:                   NoAggAllTech
Owner:                         LocalMgr
Status:                        1

show diffserv profile

To display all of the differentiated services profiles and their descriptions, use the show diffserv profile command.

show diffserv profile [profile-index]

Syntax Description

profile-index

(Optional) Profile ID.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the profiles and their descriptions:

Root@localhost# show diffserv profile 31645
Aggregate Profile Index: 31645
DSCP Value     Description


show email

To display email settings that are used for e-mailing alarm messages or scheduled reports, use the email command.

show email

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display email values:

root@localhost# show email
Email
  Server: example-email.domain.com
  Mail Alarm: enabled
  Alarm Recipients: admin@domain.com another_admin@domain.com
root@localhost# 

Related Commands

email

show entity

To display the serial number and the values of the entity MIB entPhysicalAlias and entPhysicalAssetID, use the show entity command.

show entity

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display entity values:

root@localhost# show entity
Serial Number : SAD061506JU
Alias         :
Asset ID      :

Related Commands

entity alias
entity assetid

show ftp

To display the FTP server and directory for storing scheduled reports configuration, use the show ftp command.

show ftp

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the FTP server configuration:

root@localhost# show ftp
FTP settings:
  Server:     my.ftp-server.com
  Directory:  /my/directory
  User:       myUserName

Related Commands

ftp

show hosts

To display the hosts entries, use the show hosts command.

show hosts

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the hosts entries:

Root@localhost# show hosts
# $Id: hosts,v 1.4 2002/04/04 01:47:51 pwildi Exp $
#
127.0.0.1               localhost localhost.localdomain

127.0.0.11              slot1
127.0.0.21              slot2
127.0.0.31              slot3
127.0.0.41              slot4
127.0.0.51              slot5
127.0.0.61              slot6
127.0.0.71              slot7
127.0.0.81              slot8

111.10.9.18 switch1 lab

show ip

To display the NAM IP parameters, use the show ip command.

show ip

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM IP parameters:

Root@localhost# show ip
IP address:             101.10.11.189
Subnet mask:            255.255.255.255
IP Broadcast:           111.20.255.255
DNS Name:               namlab-kom9.cisco.com
Default Gateway:        111.20.98.125
Nameserver(s):          111.69.2.135
HTTP server:            Enabled
HTTP secure server:     Disabled
HTTP port:              80
HTTP secure port:       443
TACACS+ configured:     No
Telnet:                 Enabled
SSH:                    Disabled

Related Commands

ip address
ip broadcast
ip gateway
ip host
ip hosts add
ip hosts delete
ip http port
ip http secure generate
ip http server
ip http tacacs+
ip interface

show log config

To display the maintenance image configuration import log entries, use the show log config command.

show log config

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image import log entries:

Root@localhost# show log config

Related Commands

config clear
show log upgrade
upgrade

show log patch

To display the patch log entries, use the show log patch command.

show log patch

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image import log entries:

Root@localhost# show log patch
2005/01/17 21:11 Sucessfully downloaded ftp://guest@namlab-pc1//home/guest/patch
_rpms/nam-app.3-4.cryptoK9.patch.1-0.bin.
2005/01/17 21:11 Patch nam-app.3-4.cryptoK9.patch.1-0.bin signature verified.
2005/01/17 21:11 Successfully applied patch /usr/local/nam/patch/workdir/nam-app
.3-4.cryptoK9.patch.1-0.bin.

Related Commands

config clear
show log upgrade
upgrade

show log upgrade

To display the maintenance image upgrade log entries, use the show log upgrade command.

show log upgrade

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the maintenance image upgrade entries:

Root@localhost# show log upgrade
Fri Aug 23 10:32:27 2002 : path: ftp://namlab-pc1/pub/rmon/MP-KPLUS
 Fri Aug 23 10:32:27 2002 : file: mp-dev.1-2-0-5.bin
 Fri Aug 23 10:32:27 2002 : extn: .gz
 Fri Aug 23 10:32:27 2002 : Downloading the image...
 Fri Aug 23 10:32:28 2002 : Successfully downloaded the image...
 Fri Aug 23 10:32:28 2002 : Uncompressing the image...
 Fri Aug 23 10:32:29 2002 : Finished uncompressing the file /tmp/mp-dev.1-2-0-5. bin.gz.
 Fri Aug 23 10:32:29 2002 : Successfully uncompressed the image.
 Fri Aug 23 10:32:29 2002 : Verifying the image...
 Fri Aug 23 10:32:29 2002 : opening file /tmp/mp-dev.1-2-0-5.bin.ver
 Fri Aug 23 10:32:30 2002 : Successfully verified the image.
 Fri Aug 23 10:32:30 2002 : Partition '/dev/hda1' unmounted.
 Fri Aug 23 10:32:30 2002 : Applying the Maintenance image.
 Fri Aug 23 10:32:30 2002 : This process may take several minutes...
 Fri Aug 23 10:32:30 2002 : Writing mbr...
 Fri Aug 23 10:32:30 2002 : Successfully wrote mbr.
 Fri Aug 23 10:32:30 2002 : Number of Sectors: 31
 Fri Aug 23 10:32:30 2002 : Writing grub and maint image.
 Fri Aug 23 10:33:18 2002 : Successfully wrote the maint image.
 Fri Aug 23 10:33:18 2002 : Partition '/dev/hda1' mounted.
 Fri Aug 23 10:33:18 2002 : Performing post install...
 Fri Aug 23 10:33:18 2002 : File /usr/local/nam/falcon_version copied to /mnt/mp 
/boot/appl/daughter_card.info.
 Fri Aug 23 10:33:18 2002 : Maintenance image upgrade completed successfully.

Related Commands

upgrade

show memory

To display the installed memory, available memory, and the memory being used by the system, use the show memory command.

show memory

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM memory:

Root@localhost# show memory
Installed:      858 MB
Available:      240 MB
System Usage:   617 MB

Related Commands

show bios

show monitor addrmap

To display the address map collection configuration, use the show monitor addrmap command.

show monitor addrmap [control-index]

Syntax Description

control-index

(Optional) Specifies the address map control index. Range is 1-65535.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the address map collection configuration:

Root@localhost# show monitor addrmap
Control Index:                 40042
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Related Commands

monitor addrmap

show monitor art

To display all of the ART collection configurations, use the show monitor art command.

show monitor art [control-index]

Syntax Description

control-index

(Optional) Specifies the collection control index.


Defaults

The control index variable range is 1 through 65535.

Command Modes

Command mode

Examples

This example shows how to display all of the ART collections:

Console> show monitor art
Control Index:                 18880
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Time Remaining:                2197
Response Time 1:               5
Response Time 2:               15
Response Time 3:               50
Response Time 4:               100
Response Time 5:               200
Response Time 6:               500
Response Timeout:              3000
Maximum Entries:               500


Related Commands

monitor art

show monitor diffserv host

To display all of the differentiated services host collections, use the show monitor diffserv host command.

show monitor diffserv host [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service host collection:

root@nam# show monitor diffserv host
Control index:                 17600
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 24600
IPv4 prefix length:            32
IPv6 prefix length:            128

Control index:                 23917
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 16917
IPv4 prefix length:            32
IPv6 prefix length:            128

root@nam#

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv matrix

To display all of the differentiated services matrix collections, use the show monitor diffserv matrix command.

show monitor diffserv matrix [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service matrix collection:

root@nam# show monitor diffserv matrix 5493
Control index:                 5493
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   3000
Profile index:                 24600

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv pdist

To display all of the differentiated services protocol distribution collections, use the show monitor diffserv pdist command.

show monitor diffserv pdist [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the differential service protocol distribution collection:

root@nam# show monitor diffserv pdist 35198
Control index:                 35198
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Max entries:                   100
Profile index:                 16917

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor diffserv stats

To display all of the differentiated services statistics collections, use the show monitor diffserv stats command.

show monitor diffserv stats [control-index]

Syntax Description

control-index

(Optional) Displays collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the statistics collection:

root@nam# show monitor diffserv stats 6169
Control index:                 6169
Data source:                   nde-fa0/0
Owner:                         LocalMgr
Status:                        1
Profile index:                 24600

Related Commands

monitor diffserv host
monitor diffserv matrix
monitor diffserv pdist
monitor diffserv stats

show monitor etherstats

To display all of the Ethernet statistics collection configurations, use the show monitor etherstats command.

show monitor etherstats [control-index]

Syntax Description

control-index

(Optional) Displays Ethernet statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the Ethernet statistics collection configurations:

Root@localhost#  show monitor etherstats
Control index:                 53750
Data source:                   allspan
Owner:                         LocalMgr
Status:                        1

Related Commands

monitor etherstats

show monitor etherstats on-switch

To display the supervisor engine mini-RMON statistics polling on the NAM, use the show monitor etherstats on-switch command.

show monitor etherstats on-switch

Syntax Description

This command has no arguments or keywords.

Defaults

The control index is random.

Command Modes

Command mode

Usage Guidelines

This command is supported only on the NAM-1 and NAM-2. This command is not supported on the NM-NAM.

Examples

This example shows how to display the supervisor engine mini-RMON statistics polling on the NAM:

root@localhost.cisco.com# show monitor etherstats on-switch
Supervisor mini-rmon statistics collection is enabled.

Related Commands

show monitor etherstats

show monitor history

To display all of the history collection configurations, use the show monitor history command.

show monitor history [control-index]

Syntax Description

control-index

(Optional) Displays history collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the history collection configurations:

Root@localhost# show monitor history
Control index:                 9900
Data source:                   allspan
Owner:                         LocalMgr
Status:                        1
Buckets:                       50
Interval:                      1800

Related Commands

monitor history

show monitor hlhost

To display all of the host layer host collection configurations, use the show monitor hlhost command.

show monitor hlhost [control-index]

Syntax Description

control-index

(Optional) Displays host layer host collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host layer host collection configurations:

Root@localhost# show monitor hlhost
Control Index:                 7434
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Network Layer Max Entries:     Max Possible
Application Layer Max Entries: Max Possible

Related Commands

monitor hlhost

show monitor hlmatrix

To display all of the host layer matrix collection configurations, use the show monitor hlmatrix command.

show monitor hlmatrix [control-index]

Syntax Description

control-index

(Optional) Displays host layer matrix collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host layer matrix collection configurations:

Root@localhost# show monitor hlmatrix
Control Index:                 20990
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Network Layer Max Entries:     Max Possible
Application Layer Max Entries: Max Possible

Related Commands

monitor hlmatrix

show monitor host

To display all of the host collection configurations, use the show monitor host command.

show monitor host [control-index]

Syntax Description

control-index

(Optional) Displays host collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the host collection configurations:

Root@localhost# show monitor host
Control Index:                 38426
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Related CommandsRoot@localhost#

monitor host

show monitor ifstats

To display the interface statistics collection status, use the show monitor ifstats command.

show monitor ifstats

Syntax Description

This command has no arguments or keywords.

Defaults

The control index is random.

Command Modes

Command mode

Usage Guidelines

This command is supported only on the NM-NAM.

Examples

This example shows how to display the interface statistics collection status:

root@localhost.cisco.com# show monitor ifstats
Supervisor ifstats collection is enabled.

Related Commands

monitor ifstats

show monitor matrix

To display all of the matrix collection configurations, use the show monitor matrix command.

show monitor matrix [control-index]

Syntax Description

control-index

(Optional) Displays matrix collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the matrix collection configurations:

Root@localhost#  show monitor matrix
Control Index:                 37030
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor matrix

show monitor nbar

To display the NBAR collection configuration status, use the show monitor nbar command.

show monitor nbar

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NBAR collection configuration status:

Root@localhost#  show monitor nbar
nbar collection is enabled
Root@localhost#

Related Commands

monitor nbar

show monitor pdist

To display all of the protocol distribution collection configurations, use the show monitor pdist command.

show monitor pdist [control-index]

Syntax Description

control-index

(Optional) Displays protocol distribution collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol distribution collection configurations:

Root@localhost#  show monitor pdist
Control Index:                 46451
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1

Control Index:                 56899
Data Source:                   dataport3
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor pdist

show monitor priostats

To display all of the priority statistics collection configurations, use the show monitor priostats command.

show monitor priostats [control-index]

Syntax Description

control-index

(Optional) Displays priority statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the priority statistics collection configurations:

Root@localhost#  show monitor priostats 
Control Index:                 9572
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor priostats

show monitor protocol

To display all user-modified and user-defined protocols, use the show monitor protocol command.

show monitor protocol

show monitor protocol prot-specifiers

Syntax Description

prot-specifiers

Displays a specific protocol with the protocol specifier set in the monitor protocol command.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol configurations:

Root@localhost#  show monitor protocol
No modified protocol directory entries exist.
Root@localhost#

Related Commands

monitor protocol

show monitor protocol all

To display all of the protocols in the protocol directory, use the show monitor protocol all command.

show monitor protocol all

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the protocol configurations:

Root@localhost#  show monitor protocol all
Control Index:                 46232
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#

Related Commands

monitor protocol

show monitor protocol auto-learned settings

To display the automatically learned protocol settings, use the show monitor protocol auto-learned settings command.

show monitor protocol auto-learned settings

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the auto-learned protocol settings:

Root@localhost#  show monitor protocol auto-learned settings
Protocol auto-learn:     Enabled
Max number of entries:   100
Max tcp port:            6553
Exclude tcp port range:  (Not Configured)
Max udp port:            6553
Exclude udp port range:  (Not Configured)
Root@localhost#

Related Commands

monitor protocol

show monitor urlcollection

To display the URL collection configuration, use the show monitor urlcollection command.

show monitor urlcollection

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the URL collection statistics:

root@localhost# show monitor urlcollection
root@localhost# 

Related Commands

monitor urlcollection

show monitor urlfilter

To display the URL filter configuration, use the show monitor urlfilter command.

show monitor urlfilter [control-index]

Syntax Description

control-index

(Optional) Specifies the URL filter control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the URL filter configuration:

root@localhost# show monitor urlflter
root@localhost# 

Related Commands

monitor urlfilter

show monitor vlanstats

To display all of the VLAN statistics collection configurations, use the show monitor vlanstats command.

show monitor vlanstats [control-index]

Syntax Description

control-index

(Optional) Displays VLAN statistics collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the VLAN statistics collection configurations:

Root@localhost#  show monitor vlanstats
Control Index:                 46232
Data Source:                   dataport1
Owner:                         LocalMgr
Status:                        1
Root@localhost#  

Related Commands

monitor vlanstats

show monitor vlanstats on-switch

To display the supervisor engine VLAN statistics collection configuration status, use the show monitor vlanstats on-switch command.

show monitor vlanstats on-switch

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the VLAN statistics collection configuration status:

Root@localhost#  show monitor vlanstats on-switch
Supervisor vlanstats collection is enabled.
Root@localhost#  

Related Commands

monitor vlanstats on-switch

show monitor voice

To display the voice configurations, use the show monitor voice command.

show monitor voice [protocol]

Syntax Description

protocol

(Optional) Displays voice collections by the specified protocol, either H323, SCCP, SIP, or MGCP.


Defaults

This command has no default settings.

Command Modes

Command mode

Usage Guidelines

The Media Gateway Control Protocol (MGCP) option is specific to the Network Analysis Module (NAM) software release running on network modules in the Cisco 2600, 3600, 3700 routers.

Examples

This example shows how to display the voice configurations:

Root@localhost#  show monitor voice
H.323 Voice Monitoring:                 Enabled
Number of phone table rows:             200
Number of call table rows:              200
Number of top packet jitter rows:       5
Number of top packet loss rows:         5

SCCP Voice Monitoring:                  Disabled
Number of phone table rows:             300
Number of call table rows:              300
Number of top packet jitter rows:       5
Number of top packet loss rows:         5Console>

MGCP voice monitoring:                 Disabled
Number of phone table rows:            150
Number of call table rows:             150
Number of top packet jitter rows:      7
Number of top packet loss rows:        7

This example shows how to only display information about the MGCP configuration:

Root@localhost# show monitor voice mgcp
MGCP voice monitoring:                 Disabled
Number of phone table rows:            150
Number of call table rows:             150
Number of top packet jitter rows:      7
Number of top packet loss rows:        7

Related Commands

monitor voice h.323
monitor voice mgcp
monitor voice sccp
monitor voice sip

show nam data-source

To display all of the NAM data sources, use the show nam data-source command.

show nam data-source

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM data sources:

root@localhost# show nam data-source
external
internal
netflow
nde-10.10.10.10
nde-if-fa0/0
nde-if-fa0/1
nde-if-atm0/2/0.0-aal5_layer
nde-if-atm0/2/0-aal5_layer
nde-if-atm0/2/1.0-aal5_layer
nde-if-atm0/2/1-aal5_layer
nde-if-atm0/3/1.0-aal5_layer
nde-if-atm0/3/1-aal5_layer
root@localhost# 

Related Commands

mpls data-source vc
mpls data-source vrf
mpls data-source label

show patches

To display all of the installed patches, use the show patches command.

show patches

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display all of the installed patches:

Root@localhost# show patches

Related Commands

patch

show preferences

To display the configured preferences for your screen, use the show preferences command.

show preferences

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the configured screen preferences:

root@localhost.cisco.com# show preferences
Entries per screen:   15
Refresh interval:     60 secs
Number of graph bars: 10
Hostname resolution:  Disabled
Data displayed in:    Bytes
Format large number:  No
Number notation:      Commas-dot
root@localhost.cisco.com# 

Related Commands

preferences

show protocol-feature

To display the status of ESP-NULL heuristic parsing, use the show protocol-feature command.

show protocol-feature

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the status of ESP-NULL heuristic parsing:

root@localhost.cisco.com# show protocol-feature
Protocol Feature: 
   ESP-NULL: heuristically parsing disabled. 

root@localhost.cisco.com#

Related Commands

protocol esp-null-heuristic

show remote-storage

To display the network storage target for report and capture date, use the show remote-storage command.

show remote-storage

Syntax Description

This command has no keywords or arguments.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the web user information:

root@localhost.cisco.com# show remote-storage
Description:    iscsi-2
  Type:         iscsi
  Server:       172.20.103.60
  IQN Name:     iqn.2000-05.com.wasabisystems.storagebuilder:cxr1-2|1
  Status:       Mounted
 
Description:    iscsi-3
  Type:         iscsi
  Server:       172.20.103.60
  IQN Name:     iqn.2000-05.com.wasabisystems.storagebuilder:cxr1-3|1
  Status:       Mounted
 
Description:    namlab-pc8
  Type:         nfs
  Server:       namlab-pc8.cisco.com
  Directory:    /home/kluu
  Status:       Mounted
 
root@localhose.cisco.com#

Related Commands

remote-storage nfs

show rmon buffer

To display the RMON buffers, use the show rmon buffer command.

show rmon buffer [control-index]

Syntax Description

control-index

(Optional) Displays the buffer collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the RMON channels and buffers:

Root@localhost# show rmon buffer
Index:                9791
Channel index:        21054
Full action:          Lock when full
Capture slice size:   1500 bytes
Download slice size:  1500 bytes
Download offset:      0
Max octets requested: 51200000 bytes
Owner:                LocalMgr

Related Commands

rmon buffer
rmon channel
rmon filter

show rmon channels

To display the RMON channels, use the show rmon channels command.

show rmon channels [control-index]

Syntax Description

control-index

(Optional) Displays the channels collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the RMON channels:

Root@localhost# show rmon channels
46303

Related Commands

rmon buffer
rmon channel
rmon filter

show rmon filters

To display the RMON filters, use the show rmon filters command.

show rmon filters [control-index]

Syntax Description

control-index

(Optional) Displays the filters collections by specified control index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the RMON filters:

Root@localhost# show rmon filters
46303

Related Commands

rmon buffer
rmon channel
rmon filter

show rxcounters

To display the RX data counters, use the show rxcounters command.

show rxcounters

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the RX data counters:

Root@localhost# show rxcounters
data port 1 rx pkt count: 1524112
data port 2 rx pkt count: 1115

show snmp

To display the SNMP parameters, use the show snmp command.

show snmp

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the SNMP parameters:

Root@localhost# show snmp
SNMP Agent:   mynam.cisco.com   209.265.200.225

SNMPv1:  Enabled
SNMPv2C: Enabled
SNMPv3:  Disabled

community   private  write
community   public   read

trap community   public   112.10.17.237
trap community   public   112.10.17.244

sysDescr         Network Analysis Module (WS-SVC-NAM-2), Version 3.6(1)
Copyright (c) 1999-2007 by cisco Systems, Inc.

sysObjectID      workgroup.1.3.1.1.2.291
sysContact       engineer
sysName          mynam
sysLocation      RMON Lab

Related Commands

snmp

show syslog-settings

To display the NAM system log settings, use the show syslog-settings command.

show syslog-settings

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM system log settings:

Root@localhost# show syslog-settings
MIB threshold events:   Local
Voice threshold events: Local
System alerts (debug):  Local

Related Commands

syslog

show system-alerts

To display NAM failures or problems, use the show system-alerts command.

show system-alerts

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM system alerts:

Root@localhost# show system-alerts
Jan  1 15:07:31 mynam scpd: scpd: 0x10/44 -> 0x15/0, len 18, op 0x14a, len
 2, flags 0(), seq 65443, ver 0
Jan  1 15:07:31 mynam scpd: scpd: SCP PC Blade REQ from 0x10/44.
Jan  1 15:07:31 mynam scpd: scpd: sub-opcode 6, status 45.
Jan  1 15:07:31 mynam scpd: scpd: SCP PC Shutdown.
Jan  1 15:07:33 mynam scpd: scpd: shutdown of NAM!
Jan  1 15:07:35 mynam rmond[595]: rmond: received QUIT signal! Exiting!
Jan  1 15:07:38 mynam polld: Terminating polld.
Jan  1 15:07:42 mynam configd: SIGTERM recieved.
Jan  1 15:07:42 mynam configd: Terminating with success.
Jan  1 00:02:43 mynam scpd: scpd: 0x10/1 -> 0x15/0, len 18, op 0x14a, len

Related Commands

syslog remote-server

show tech-support

To display technical support information, use the show tech-support command.

show tech-support

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM technical support information:

Root@localhost# show tech-support
PID TTY      STAT   TIME COMMAND
   1 ?        S      0:08 init
   2 ?        SW     0:00 [keventd]
   3 ?        SWN    0:00 [ksoftirqd_CPU0]
   4 ?        SWN    0:00 [ksoftirqd_CPU1]
   5 ?        SW     0:00 [kswapd]
   6 ?        SW     0:00 [bdflush]
   7 ?        SW     0:05 [kupdated]
 238 ?        S      0:00 /usr/local/nam/bin/scpd -l -d/var/log/scpd
 246 ?        SW     0:10 [kjournald]
 474 ?        S      0:01 syslogd -m 0
 477 ?        S      0:00 klogd -2
 501 ?        S      0:00 /usr/sbin/atd

show time

To display NAM time zone or time synchronization settings, use the show time command.

show time

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM time settings:

Root@localhost# show time
NAM synchronize time to:           Switch
Timezone configured on the switch: PDT
Current system time:               Thu May  1 09:29:49 GMT+8 2003

Related Commands

time

show trap-dest

To display all of the NAM trap destinations, use the show trap-dest command.

show trap-dest [trap-index]

Syntax Description

trap-index

(Optional) Displays the trap destinations by the specified trap index.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM trap destinations:

Root@localhost# show trap-dest 
Trap index: 23370
Community:  public
Address:    172.20.98.136
UDP port:   162 (00a2)
Owner:      LocalMgr
Root@localhost# 

Related Commands

trap-dest

show version

To display the NAM version information, use the show version command.

show version

Syntax Description

This command has no keywords or arguments.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the NAM version information:

Root@localhost#  show version
NAM application image version: 3.6(1)
Maintenance image version: 2.1(2)
NAM Daughter Card Micro code version: 1.34.1.28 (NAM)
BIOS Version: 4.0-Rel 6.0.9
Installed patches: 

Wed Jun 6, 16:10:27 2007 Patch: nam-dev-patch-3-6-1 Description: Development patch for NAM

Root@localhost#

Related Commands

config clear

show web-publication

To display the web publication hosts configuration information, use the show web-publication command.

show web-publication

Syntax Description

This command has no keywords or arguments.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the web user information:

Root@localhost#  show web-publication
Web publication:     enabled
Allowed hosts:
Access code:
Alarm screens:       disabled
Report screens:      enabled
Voice screens:       enabled
RMON screens:        enabled

Related Commands

web-publication

show web-users

To display the web user information, use the show web-users command.

show web-users [user-name]

Syntax Description

user-name

(Optional) Displays the specified user name information.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to display the web user information:

Root@localhost#  show web-users admin
User: admin
----------------------------
Account management: Enabled
System config:      Enabled
Capture:            Enabled
Alarm config:       Enabled
Collection config:  Enabled
Collection view:    Enabled
Console  

Related Commands

web-user

shutdown

To shut down the NAM, use the shutdown command.

shutdown

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to shut down the NAM:

Root@localhost# shutdown
Shut down the NAM? (y/n) [n]: n

Related Commands

logout
preferences
exit

snmp

To configure NAM system MIB objects, use the snmp command.

snmp community community-string { ro | rw }

snmp delete community community-string

snmp contact contact-string

snmp location location-string

snmp name name-string

Syntax Description

community community-string ro | rw

Sets the device community string.

delete community-string

Deletes the device community string.

contact contact-string

Sets the device contact string.

location location-string

Sets the device location.

name name-string

Sets the device name.


Defaults

This command has no default settings.

Command Modes

Command mode

Examples

This example shows how to configure NAM system MIB objects:

Root@localhost# snmp community askdfhtjlks.01` contact george location frisco, name al

Related Commands

show snmp

supervisor address

To set the local supervisor engine address to the NAM, use supervisor address command. To return the NAM back to the default where the NAM learns the supervisor engine address during the NAM bootup process, use the no supervisor address command.

supervisor address string

no supervisor address

Syntax Description

string

Specifies the supervisor engine address.


Defaults

This command has no default settings.

Command Modes

Command mode

Usage Guidelines

The local supervisor engine address is sent to the NAM by the supervisor engine during the NAM bootup process. In some specific network configurations, the supervisor engine address that the NAM expected to receive may not exist or cannot be reached by the NAM. This command allows you to set a NAM-reachable supervisor address.

This command is supported in NAM-1 and NAM-2 only.

Examples

This example shows how to set the local supervisor engine address to the NAM as 123.54.106.12:

root@localhost.cisco.com# supervisor address 123.54.106.12

syslog

To enter the system log subcommand mode, and then configure system logging for the NAM, use the syslog command.

syslog

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Modes

Command mode

Usage Guidelines

When you enter the system log subcommand mode, the following commands are available:

cancel—Discards changes and exits from the subcommand mode.

exit—Saves changes and exits from the subcommand mode; see the "exit" command section.

mib(Optional) Configures the system log for NAM MIB threshold events, see the "syslog mib" command section.

remote-server(Optional) Configures the system log for remote logging, see the "syslog remote-server" command section.

system(Optional) Configures the system log for NAM system alerts, see the "syslog system" command section.

voice(Optional) Configures the system log for voice threshold events.

Examples

This example shows how to configure system logging for the NAM:

Root@localhost# syslog
root@localhost.cisco.com(sub-syslog)#

Related Commands

show syslog-settings

syslog mib

To capture NAM MIB alarms and send them to the system log, use the syslog mib command from the syslog subcommand mode.

syslog mib [local enable | disable] [remote enable | disable]

Syntax Description

local enable | disable

(Optional) Enables or disables local MIB alarms.

remote enable | disable

(Optional) Enables or disables remote MIB alarms.


Defaults

This command has no default settings.

Command Modes

Syslog subcommand mode

Examples

This example shows how to configure the NAM to capture MIB alarms:

root@localhost# syslog 
Entering into subcommand mode for this command.
Type 'exit' to come out of this mode.
Type 'cancel' to discard changes and to come out of this mode.
root@localhost(sub-syslog)# mib local enable 
root@localhost(sub-syslog)# exit
NAM syslog settings updated successfully.
root@localhost# show syslog
MIB threshold events:   Local
Voice threshold events: Local
System alerts (info):   Local

Related Commands

alarm mib
alarm voice
show alarm event
show autostart
show syslog-settings
syslog
syslog remote-server
web-user

syslog remote-server

To capture NAM remote server alarms, use the syslog remote-server command from the syslog subcommand mode.

syslog remote-server disable | [server1 [server2] [server3] [server4] [server5]

Syntax Description

disable

Disables remote server event logging.

server1 server2 server3 server4 server5

(Optional) Specifies the remote server.


Defaults

This command has no default settings.

Command Modes

Syslog subcommand mode

Examples

This example shows how to configure the NAM to capture remote server alarms:

Root@localhost<sub-syslog># syslog 
Entering into subcommand mode for this command.
Type 'exit' to come out of this mode.
Type 'cancel' to discard changes and to come out of this mode.
Root@localhost<sub-syslog># voice remote enable 
Root@localhost<sub-syslog># syslog remote-server 172.20.98.136
Root@localhost<sub-syslog># exit
NAM syslog settings updated successfully.

Related Commands

alarm mib
alarm voice
show alarm event
show autostart
show syslog-settings
syslog
web-user

syslog system

To capture NAM system alarms, use the syslog system command from the syslog subcommand mode.

syslog system debug enable | disable local enable | disable remote enable | disable

Syntax Description

debug enable | disable

Enables or disables system debug alarms.

local enable | disable

Enables or disables local system alarms.

remote enable | disable

Enables or disables remote server system alarms.


Defaults

This command has no default settings.

Command Modes

Syslog subcommand mode

Examples

This example shows how to configure the NAM to capture system alarms:

Root@localhost# syslog system local enable

Related Commands

alarm mib
alarm voice
show alarm event
show autostart
show syslog-settings
syslog
syslog remote-server
web-user