Cisco Configuration Engine Administration Guide 3.5
parameters
Downloads: This chapterpdf (PDF - 98.0KB) The complete bookPDF (PDF - 5.91MB) | Feedback

Parameter Manager

Table Of Contents

Parameter Manager

Parameter Validations

Edit Fetch Process

Edit Save Process

Import Script File


Parameter Manager


To access Parameter management tasks, log into the system (see "Logging In" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.

From the Tools page, click Parameter Mgr.

With the directory manager you can:

Parameter Validations

Edit Fetch Process

Edit Save Process

Import Script File

Parameter Validations


Step 1 From the Parameter Manager page, click Parameter Validations.

The Parameter Validations page appears (see Figure 11-1).

Figure 11-1 ParametersValidations Page

Step 2 From drop-down list for each available parameter, select the desired validation function, then click Update.

A status page appears showing the updates you have made.


Edit Fetch Process


Step 1 From the Parameter Manager page, click Edit Fetch Process.

The Edit Fetch Process page appears (see Figure 11-2).

Figure 11-2 Edit Fetch Process Page

Step 2 Use the drop-down arrow to select the desired fetch process, then click Update.

Confirmation of this action is reported.


Edit Save Process


Step 1 From the Parameter Manager page, click Edit Save Process.

The Edit Save Process page appears (see Figure 11-3).

Figure 11-3 Edit Save Process Page

Step 2 Use the drop-down arrow to select the desired save process, then click Update.

Confirmation of this action is reported.


Import Script File


Step 1 From the Parameter Manager page, click Import Script File.

The Import Script File page appears (see Figure 11-4).

Figure 11-4 Import Script File Page

Step 2 Enter the desired filename, or click Browse to access your file system, then click Upload.