Cisco Configuration Engine Administration Guide
Service Manager
Downloads: This chapterpdf (PDF - 93.0KB) The complete bookPDF (PDF - 5.52MB) | Feedback

Service Manager

Table Of Contents

Service Manager

Editing Service Properties

Editing IMGW Device and Hop Types


Service Manager


To access Service management tasks, log into the system (see "Logging In" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.

From the Tools Page, click Service Manager. The Service Manager page appears showing:

Edit Service Properties

Edit IMGW Device and Hop Types

Editing Service Properties


Step 1 From the Service Manager Functional Overview page, click Edit Service Properties. The Edit Service Properties page appears (see Figure 15-1).

Figure 15-1 Edit Service Properties

Step 2 From the Edit Service Properties page, select Image Service by clicking the associated radio button.

The service properties page for Image Service appears (see Figure 15-2).

Figure 15-2 Image Service Properties

Step 3 To Edit Image Types: Click the move button (<<) to move an image type to the Removed Image Types column.

Step 4 To Edit Boot Timeout: Enter a new value in the text box.

Step 5 To Edit Check Server Msg Timeout: Enter a new value in the text box.

Step 6 To Edit Check Server Msg Retry: Enter a new value in the text box.

Step 7 To cancel this task, click Cancel.

Step 8 To submit the changes, click OK.


Editing IMGW Device and Hop Types


Step 1 From the Service Manager Functional Overview page, click Edit IMGW Device and Hop Types.

The IMGW Device and Hop Types page appears (see Figure 15-3).

Figure 15-3 IMGW Device and Hop Types

Step 2 To remove a Device Type or Hop Type, click the item, then click Remove.

Step 3 To add a new Device Type or Hop Type, enter the item in the dialog box, then click Add to list.

Step 4 When complete, so save your changes, click Edit.