Table Of Contents
Mounting and Unmounting the CD-ROM
Mounting a Remote CD-ROM Drive
Mounting and Unmounting the CD-ROM
This appendix describes how to mount the Essentials CD-ROM on a Solaris 2.6 system and includes general information only. For more detailed instructions, consult your Sun documentation.
You can install Essentials from a CD-ROM mounted on the CiscoWorks server system or from a CD-ROM mounted on a remote Solaris system.
This appendix contains the following sections:
•Mounting a Local CD-ROM Drive
•Mounting a Remote CD-ROM Drive
Mounting a Local CD-ROM Drive
Insert the Essentials CD-ROM into the CD-ROM drive and do the following:
Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (
#
).Step 2 If the /cdrom directory does not already exist, enter the following command to create it:
# mkdir /cdrom
Step 3 Mount the CD-ROM drive.
Note The vold process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.
If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.
Step 4 If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify the vold daemon is running by entering:
# ps -e | grep vold | grep -v grepStep 5 If vold is running, the system displays the process identification number of vold. If the system does not display anything, restart the daemon by entering:
# /usr/sbin/vold &Step 6 If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:
# ps -ef | grep vold | grep -v grepStep 7 Stop the vold process by entering:
# kill -15 process_ID_numberStep 8 Restart the vold process by entering:
# /usr/sbin/vold &Step 9 If you encounter problems using the vold daemon, enter the following command to mount the CD-ROM:
# mount -F hsfs -r ro /dev/dsk/cxtyd0sz /cdrom/cdrom0where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.
You have now mounted the CD-ROM drive. Refer to Chapter 1, "Installing Essentials" for instructions on installation.
Mounting a Remote CD-ROM Drive
Insert the Essentials CD-ROM into the CD-ROM drive of the remote machine and perform Step 1 through Step 12 on the remote machine.
Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (
#
).Step 2 If the /cdrom directory does not already exist, enter:
# mkdir /cdrom
Step 3 Mount the CD-ROM drive.
Note The vold daemon process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.
If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.
Step 4 If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify that the vold daemon is running by entering:
# ps -e | grep vold | grep -v grep
Step 5 If vold is running, the system displays /usr/sbin/vold. If the system does not display anything, restart the daemon by entering:
# /usr/sbin/vold &Step 6 If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:
# ps -ef | grep vold | grep -v grepStep 7 Stop the vold process by entering the following command:
# kill -15 process_ID_number
Step 8 Restart the vold process by entering the following command:
# /usr/sbin/vold &
Step 9 If you encounter problems using the vold daemon, enter the following to mount the CD-ROM:
# mount -F hsfs -r ro /dev/dsk/cxtyd0sz /cdrom/cdrom0where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.
Step 10 Use a text editor to create an /etc/dfs/dfstab file, if one does not exist.
Step 11 Add the following line to the /etc/dfs/dfstab file:
share -F nfs -o ro /cdrom/cdrom0
Step 12 Make sure your remote machine is enabled as an NFS server by entering:
# ps -ef | grep nfs | grep -v grepThe output of this command indicates whether the /usr/lib/nfs/nfsd and /usr/lib/nfs/mountd daemons are running. If they are not running, enable your machine as an NFS server by entering:
# /etc/init.d/nfs.server startIf your machine is enabled as an NFS server, enter one of the following:
# share# shareallStep 13 Go to the machine on which you want to install Essentials.
Step 14 Log on as superuser by entering the command su and the root password, or log in as root.
Step 15 Create a /cdrom directory, if one does not already exist, by entering:
# mkdir -p /cdrom/rme20
Step 16 To mount the CD-ROM drive, enter:
# /usr/sbin/mount -r remote_machine_name:/cdrom/cdrom0 /cdrom/rme20
You have now mounted the CD-ROM drive. Refer to Refer to Chapter 1, "Installing Essentials" for instructions on installation.
Unmounting the CD-ROM Drive
After you complete the Essentials installation, you need to unmount the CD-ROM drive and eject the CD-ROM.
To unmount a local CD-ROM drive, as root, enter:
# cd# umount /cdrom/cdrom0# ejectTo unmount a remote CD-ROM drive:
Step 1 As root, enter the following on the local machine:
# umount /cdrom/rme20Step 2 As root, enter the following on the remote machine:
# umount /cdrom/cdrom0# eject
Note Instead of using the eject command, you can select File > Eject from the File Manager.