Guest

CiscoWorks Device Fault Manager

Readme for CiscoWorks Device Fault Manager 2.0.13 on Solaris

  • Viewing Options

  • PDF (406.5 KB)
  • Feedback
Readme for CiscoWorks Device Fault Manager 2.0.13 on Solaris

Table Of Contents

Readme for CiscoWorks
Device Fault Manager 2.0.13 on Solaris

Description

Related Documentation

New Device Support

Hardware and Software Requirements

Device Packages

Device Package Updates

Downloading DFM 2.0.13

Installing DFM 2.0.13

Known DFM 2.0.13 Problems

Resolved DFM Problems


Readme for CiscoWorks
Device Fault Manager 2.0.13 on Solaris


This Readme is for CiscoWorks Device Fault Manager (DFM) 2.0.13 on Solaris. It contains the following sections:

Description

Related Documentation

New Device Support

Hardware and Software Requirements

Device Packages

Device Package Updates

Downloading DFM 2.0.13

Installing DFM 2.0.13

Known DFM 2.0.13 Problems

Resolved DFM Problems

Description

DFM 2.0.13 is a collection of updated files necessary to provide support for the devices listed in New Device Support.


Caution You cannot remove DFM 2.0.13 after installing it; to return to your original configuration, you will have to uninstall and reinstall DFM. Therefore, you should save your configuration before installing DFM 2.0.13 as described in Installing DFM 2.0.13.

DFM 2.0.13 contains only the updated files, not a complete DFM image.

Related Documentation

Information about DFM is available from Cisco.com. Go to http://www.cisco.com/en/US/products/sw/cscowork/ps2421/tsd_products_support_series_home.html.


Note For the status of DFM bugs that are due to device-specific problems, refer to the documents on Cisco.com at this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_release_notes_list.html.



Note You should print out and read this document before installing DFM 2.0.13.


New Device Support

Table 1 lists the devices supported in Device Fault Manager 2.0.13.

For a list of all devices supported in Device Fault Manager 2.0.6, see the Supported Devices Table for Device Fault Manager 2.0.6 on Cisco.com. To access this, go to:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/2.0_IDU_2.0.6/device_support/table/dfm2_0_6.html

Table 1 Device Support Provided in DFM 2.0.13

Device Type
Devices/
Modules Supported
sysObjectID
Class

Cisco MWR 2900 Series Mobile Wireless Routers

Cisco MWR 2941-DC Mobile Wireless Router (MWR-2941-DC)

1.3.6.1.4.1.9.1.1014

Router

Data Center Switches

Cisco Nexus 5020 Switch (N5K-C5020P-BF)

1.3.6.1.4.1.9.12.3.1.3.719

Switch

Cisco Nexus 7000 10-Slot Switch (N7K-C7010)

1.3.6.1.4.1.9.12.3.1.3.612

Switch

Cisco Nexus 7000 18-Slot Switch (N7K-C7018)

1.3.6.1.4.1.9.12.3.1.3.777

Switch

Cisco ME 3400 Series Ethernet Access Switches

Cisco ME 3400-24TS-D Switch (ME3400-24TS-D)

1.3.6.1.4.1.9.1.737

Switch

Cisco ME 3400EG-2CS-A Switch (ME-3400EG-2CS-A)

1.3.6.1.4.1.9.1.1007

Switch

Cisco ME 3400EG-12CS-M Switch (ME-3400EG-12CS-M)

1.3.6.1.4.1.9.1.1008

Switch

Cisco ME 3400E-24TS-M Switch (ME-3400E-24TS-M)

1.3.6.1.4.1.9.1.1009

Switch

Cisco Wide Area Application Engine (WAE) Appliances

Cisco WAE-7371 Wide Area Application Engine (WAE-7371)

1.3.6.1.4.1.9.1.908

Host

Cisco 7300 Series Content Engines

Cisco WAE-7341 Wide Area Application Engine (WAE-7341)

1.3.6.1.4.1.9.1.907

Host

Cisco NAM 2200 Series Appliances

Cisco NAM 2204 Appliance (NAM2204)

1.3.6.1.4.1.9.1.1032

Probe

Cisco NAM 2220 Appliance (NAM2220)

1.3.6.1.4.1.9.1.1033

Probe

Cisco Catalyst 2975 Switch

Cisco Catalyst 2975 Switch (WS-C2975GS-48PS-L)

1.3.6.1.4.1.9.1.1067

Switch

Cisco Catalyst 2975 Switch (WS-C2975GS-48PS-L Stack)

1.3.6.1.4.1.9.1.1068

Switch

Cisco 800 Series Routers

Cisco 888G/888GW Integrated Services Router (CISCO888G-K9, CISCO888GW-G-AN-K9, CISCO888GW-G-EN-K9)

1.3.6.1.4.1.9.1.853

Router

Cisco 887 Integrated Services Routers (C887VDSL2-K9)

1.3.6.1.4.1.9.1.1040

Router

Cisco 891/891W Integrated Services Router (CISCO891-K9, CISCO891W-AGN-A-K9, CISCO891W-AGN-C-K9, CISCO891W-AGN-N-K9)

1.3.6.1.4.1.9.1.857

Router

Cisco 892/892W Integrated Services Router (CISCO892-K9, CISCO892J-K9, CISCO892W-AGN-E-K9, CISCO892W-AGN-P-K9)

1.3.6.1.4.1.9.1.858

Router

Cisco 851/851W Integrated Services Router (CISCO851-K9, CISCO851W-G-A-K9, CISCO851W-G-E-K9, CISCO851W-G-J-K9)

1.3.6.1.4.1.9.1.566

Router

Cisco 4400 Series Wireless LAN Controllers

Cisco 4402,4404 Wireless LAN Controller (AIR-WLC4402-12-K9, AIR-WLC4402-25-K9, AIR-WLC4402-50-K9, AIR-WLC4404-100-K9)

1.3.6.1.4.1.14179.1.1.4.3

Host

Cisco 3800 Series Integrated Services Routers

Cisco 3825 NOVPN Integrated Services Router (3825-NOVPN)

1.3.6.1.4.1.9.1.1103

Router

Cisco 3845 NOVPN Integrated Services Router (3845-NOVPN)

1.3.6.1.4.1.9.1.1102

Router

Cisco Catalyst 2350 Series Switches

Cisco Catalyst 2350-48TD-S Switch

1.3.6.1.4.1.9.1.1104

Switch

Cisco 600 Series Content Engines

Cisco 674 Content Engine (WAE 674)

1.3.6.1.4.1.9.1.996

Host

Cisco Catalyst 3560 Series Switches

Cisco Catalyst 3560-12PC-S Compact Switch

1.3.6.1.4.1.9.1.1015

Switch

Cisco Catalyst 2960 Series Switches

Cisco Catalyst 2960-48TT-S Switch

1.3.6.1.4.1.9.1.1005

Switch

Cisco Catalyst 2960-8TC-S Compact Switch

1.3.6.1.4.1.9.1.1006

Switch

Cisco Wide Area Application Engine (WAE) Appliances

Cisco WAE-674 Wide Area Application Engine(WAE-674)

1.3.6.1.4.1.9.1.957

Host

Data Center Switches

Cisco Nexus 5010 Switch(N5K-C5010P-BF)

1.3.6.1.4.1.9.12.3.1.3.798

Switch


Hardware and Software Requirements

DFM 2.0.13 can be installed only on DFM 2.0.10, 2.0.11, or 2.0.12. Installing DFM 2.0.13, provides instructions on how to verify the DFM version that is on your system.

For information on installing DFM, refer to the documents on Cisco.com at the URL:

http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html

Device Packages

Cisco's routers and switches are referred to as network devices. Routers and switches must be physically installed in the appropriate chassis and connected to your network (using each specific device's hardware installation guide). A software update that enables Device Fault Manager to support new features for a particular device is called a device package.

Device Package Updates

Device Fault Manager provides support for a considerable range of devices by installing device packages. Additional device packages can be added to Device Fault Manager anytime after the initial product release or installation. When new device packages become available, they are placed on Cisco.com. Check http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm to ensure that you have the latest device release. You can add or update device packages using Software Center. Software Center is a component of Common Services.

For more information on using Software Center, see User Guide for Common Services.

Downloading DFM 2.0.13

DFM 2.0.13 files are downloaded in a compressed form. To prevent overwriting of files in existing directories as well as ensure that adequate disk space is available, you should download the files to a temporary working area of your server, and then uncompress the files.


Note You can also use the Common Services Device Update function to download DFM 2.0.13. For more information, from the Common Services home page, select Software Center > Software Update and click Help.



Step 1 Make sure you have adequate free space, then, from the DFM download page at http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm, click the link to cwdfm2_0_13_sol.zip, and follow the instructions to download the zip file to a temporary working area of your server.

Step 2 Unzip all files into the temporary working area.


Installing DFM 2.0.13


Caution You cannot remove DFM 2.0.13 after installing it; to return to your original configuration, you will have to uninstall and reinstall DFM. Therefore, you should save your configuration before installing DFM 2.0.13 as described in Step 1.


Step 1 Make sure that you have a backup of your configuration, in case you need to revert back to it. (DFM 2.0.13 cannot be uninstalled.)

Step 2 Verify that DFM 2.0.10, 2.0.11, or 2.0.12 is installed:

a. From the Common Services home page, select Software Center > Software Update.

b. In the Products Installed table, verify that the Device Fault Manager row lists version 2.0.10, 2.0.11, or 2.0.12.

Step 3 Move to the directory in which the unzipped DFM 2.0.13 files reside, and run the installation script:

# cd cwdfm2_0_13_sol
# ./setup.sh


Note You can run the installation remotely. For information on mounting and unmounting disks, refer to Installation and Setup Guide for Device Fault Manager on Solaris.You can view this document by logging onto Cisco.com and going to http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html


Step 4 Follow the prompts in the installation script. The options displayed by the installation script depend on your configuration.

Step 5 Verify the installation:

a. From the Common Services home page, select Software Center > Software Update.

b. In the Products Installed table, click Device Fault Manager.

c. In the Patches Installed table, verify that the version corresponding to Device Fault Manager is 2.0.13.

Step 6 Rediscover any devices that are in the Unsupported state using Device Management > Rediscover/Delete from the DFM home page.

Step 7 Remove the distribution files from the temporary working area on your server.


Known DFM 2.0.13 Problems

The following table describes the known problems in DFM 2.0.13. Unless otherwise specified, there is no workaround for these problems.

For a list of known problems in Device Fault Manager, refer the Readmes for CiscoWorks Device Fault Manager. You can the documents on Cisco.com by going to:

http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html

For the status of other DFM bugs that are due to device-specific problems, refer the documents on Cisco.com at this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_release_notes_list.html.

Table 2 Known Problems in DFM 2.0.13 

Bug ID
Summary
Explanation

CSCso70605

IDU20 and IDU21: Warning alert is not generated for Operationally Down Card.

When the Module Status is set to 3 for 1.3.6.1.4.1.9.5.1.3.1.1.10, Warning alert should be generated for an Operationally Down Card as per the Syntax of the MIB. It is not generated. But a Critical alarm is generated when the Module Status is set to 4.

CSCso52084

Support for revised MIB values should be provided.

Alerts are not generated for the Environment components like temperature, power, fan, and voltage of some revised Mib values. Warning alert is not generated for Fan in IDU21. Support for revised MIB values should be provided.

CSCsy47093

IDU22: InstrumentedBy class is not created for Chassis component

InstrumentedBy class is not created under Chassis component for generating HighBackplaneUtilization alerts for some of the devices.

CSCsx93914

IDU22: TemperatureSensor component status is displayed as Not Applicable (NA)

TemperatureSensor component status is displayed as Not Applicable. This is applicable only to Cisco 4402 Wireless LAN Controller (AIR-WLC4402-25-K9).

CSCsy26143

IDU22: MIB support is not available for Memory component

Memory alerts are not generated because MIB support is not available for Memory component. This is applicable only to Cisco WAE-7341 Wide Area Application Engine.


Resolved DFM Problems

The following table describes DFM problems that are resolved in DFM 2.0.13.

Table 3 Problems Resolved in DFM 2.0.13

Bug ID
Summary
Explanation

CSCsq35972

sysOIDs 1.3.6.1.4.1.9.1.900 and 1.3.6.1.4.1.9.1.901 were wrongly mapped to C1840 and C1880 instead of MCS7816H and MCS7828H.

This problem has been resolved.

CSCsq36121

NM-CUE (1.3.6.1.4.1.9.1.622) and AIM-CUE (1.3.6.1.4.1.9.1.623) type was Host instead of Router.

This problem has been resolved.

CSCsl52191

CUOM did not increment the ICMP sequence number in its requests.

This problem has been resolved.

CSCsq38090

For a switch interface, CUOM was displaying an incorrect High Utilization event value.

This problem has been resolved.

CSCsy16978

ACE 4710 was not supported in DFM 2.0.12. It was displayed as unknown

This problem has been resolved.

CSCsv04278

DFM: DDV was not updated when the standby Supervisor was removed or went down in the device 4500

This problem has been resolved.

CSCsv04163

DFM: DDV was not updated when the active Supervisor was removed or went down in the device 4500

This problem has been resolved.