Installation Guide for Cisco Unified Operations Manager 2.3
User Inputs for Installation, Upgrade, and Reinstallation
Downloads: This chapterpdf (PDF - 166.0KB) The complete bookPDF (PDF - 1.65MB) | Feedback

User Input for Installation, Reinstallation, and Upgrade

Table Of Contents

User Input for Installation, Reinstallation, and Upgrade

User Input for a Typical Installation

User Input for a Custom Installation

Password Information

Password Rules for a New Installation

Fixing Problems That Can Occur When You Change Passwords

Password Rules for an Upgrade Installation

Password Rules for a Reinstallation

Password Descriptions

Common Services Admin Password

System Identity Account Password

Common Services Guest Password

Common Services Database Password

Changing Passwords

Changing the Common Services Admin Password

Changing the casuser Password


User Input for Installation, Reinstallation, and Upgrade


This appendix provides information on user input for Operations Manager installation, reinstallation, and upgrade.

This appendix contains:

User Input for a Typical Installation

User Input for a Custom Installation

Password Information

User Input for a Typical Installation

Table A-1 lists information you need to supply when installing Operations Manager for the first time in Typical mode.

Table A-1 User Input for New Installation: Typical 

Settings
Value

Applications to install

Select the applications you want to install.

Password for admin user

No default values.

Enter the admin password. For more information on passwords, see Password Information.

Password for System Identity account

No default values.

Enter the System Identity account password. For more information on passwords, see Password Information.

Password for casuser

If you leave the field blank, the password is generated randomly.

Mail Settings:

HTTPS port

Administrator's e-mail address

SMTP server name

Note Appears if IIS was detected on your system, and you indicated that you would like to avoid port conflict between IIS and Operations Manager by reconfiguring the default HTTPS port. Otherwise, Mail Settings appears only during a Custom installation.

The default values are:

Port number 443—Enter a value from the range that is displayed.

admin@domain.com

localhost name

Note Any time you change the HTTPS port that Operations Manager uses, see Ensuring that Service Statistics Manager Uses the Correct HTTPs Port to Contact Operations Manager, page 2-5.


Table A-2 lists information you need to enter during an upgrade installation in Typical mode.

Table A-2 User Input for Upgrade Installation: Typical 

Settings
Value

Password for casuser account

If you leave the field blank, the password is generated randomly. (See Fixing Problems That Can Occur When You Change Passwords.)

Applications to install

Select the applications you want to install.


Table A-3 lists information you need to enter when reinstalling in Typical mode:

Table A-3 User Input for Reinstallation: Typical 

Settings
Value

Password for casuser account

If you leave the field blank, the password is generated randomly. (See Fixing Problems That Can Occur When You Change Passwords.)

Applications to install

Select the applications you want to install.


User Input for a Custom Installation

Table A-4 lists the information you must enter when installing for the first time in Custom mode.

Table A-4 User Input for a New Installation: Custom 

Settings
Value

Destination folder

The default location is System drive:\Program Files\CSCOpx. If you want to install in a specific location, Select another location.

We recommend that you specify a short path for the destination folder.

Applications to install

Select the applications you want to install.

Password for users admin and guest (Mandatory)

No default values. Enter the admin and guest password. For more information on passwords, see Password Information.

Password for System Identity account (Mandatory)

No default values.

Enter the system identity account password. For more information on passwords, see Password Information.

Password for user casuser

If you leave the field blank, the password is generated randomly.

Password for the database (Mandatory)

Enter the database password. For more information on passwords, see Password Information.

Mail Settings (Mandatory):

HTTPS port

Administrator's e-mail address

SMTP server name

The default values are:

443—If IIS is installed on your server, enter a port number from the range displayed.

admin@domain.com

localhost name

Note Any time you change the HTTPS port that Operations Manager uses, see Ensuring that Service Statistics Manager Uses the Correct HTTPs Port to Contact Operations Manager, page 2-5.

Data for the Self-signed Certificate (Mandatory):

Country Code

State

City

Organization Name

Organization Unit Name

Host name

E-mail Address

By default, the self-signed certificate is generated using the organization that Windows is registered to, and the hostname.

You must enter the hostname. You can leave the other fields blank.

Note Common Services allows you to create security certificates to enable SSL communication between your client browser and management server. Self-signed certificates are valid for five years from the date of creation. When the certificate expires, the browser prompts you to install the certificate again from the server on which Common Services resides. In Typical mode, this certificate is automatically generated.


Table A-5 lists the information you must enter during an upgrade installation in Custom mode.


Note If Service Statistics Manager is installed in your network, it will stop collecting data from Operations Manager if you change either of the following:

The user admin password

The destination location (the directory in which Operations Manager is installed)

You can reenable data collection by performing the procedures that are documented in Release Notes for Cisco Unified Service Statistics Manager 1.2.


Table A-5 User Input for an Upgrade Installation: Custom 

Settings
Value

Applications to install

Select the applications you want to install.

Password for users admin and guest (Optional)

You can change the passwords for admin and guest users. To keep the existing passwords, leave the fields blank. (See Fixing Problems That Can Occur When You Change Passwords.)

Password for System Identity account (Mandatory)

No default values.

Enter the System Identity account password. For more information on passwords, see Password Information.

Password for the user casuser (Optional)

If you do not enter a password, the setup program generates a random password for you.

(See Fixing Problems That Can Occur When You Change Passwords.)

Password for the database (Optional)

Leave the fields blank to use the existing password.

Mail Settings (Optional):

HTTPS port

Administrator's e-mail address

SMTP server name

You can choose to keep the existing information.

Note Any time you change the HTTPS port that Operations Manager uses, see Ensuring that Service Statistics Manager Uses the Correct HTTPs Port to Contact Operations Manager, page 2-5.

Data for the Self-signed Certificate (Mandatory):

Country Code

State

City

Organization

Organization Unit Name

E-mail Address

You can change the self-signed certificate information. By default, the installation program uses the existing information.

If you want to generate a new certificate, uncheck the Keep Existing Certificate check box, and enter the country code, state, city, company, organization, and hostname for HTTPS.

You must enter the hostname. You can leave the other fields blank.

Note Common Services allows you to create security certificates to enable SSL communication between your client browser and management server. Self-signed certificates are valid for five years from the date of creation. When the certificate expires, the browser prompts you to install the certificate again from the server where you have installed Common Services. In Typical mode, this certificate is automatically generated.


Table A-6 lists the information you must enter while reinstalling in Custom mode.


Note If Service Statistics Manager is installed in your network, it will stop collecting data from Operations Manager if you change either of the following:

The user admin password

The destination location (the directory in which Operations Manager is installed)

You can reenable data collection by performing the procedures that are documented in Release Notes for Cisco Unified Service Statistics Manager 1.2.


Table A-6 User Input for Reinstallation: Custom 

Settings
Value

Destination folder

The default location is System drive:\Program Files\CSCOpx.

We recommend that you specify a short path for the destination folder.

Password for users admin and guest (Optional)

You can change the passwords for the admin and guest users. To keep the existing passwords, leave the fields blank.

(If you change the password for the admin user, see Fixing Problems That Can Occur When You Change Passwords.)

Password for System Identity account (Mandatory)

You can change the passwords for the System Identity account. To keep the existing passwords, leave the fields blank.

Password for user casuser (Optional)

If you do not enter a password, the setup program generates a random password for you. (See Fixing Problems That Can Occur When You Change Passwords.)

Password for the database (Optional)

Leave the fields blank to retain the existing password.

Mail Settings (Optional):

HTTPS port

Administrator's e-mail address

SMTP server name

You can choose to keep the existing information.

Note Any time you change the HTTPS port that Operations Manager uses, see Ensuring that Service Statistics Manager Uses the Correct HTTPs Port to Contact Operations Manager, page 2-5.

Data for the Self-signed Certificate (Mandatory):

Country Code

State

City

Organization Name

Organization Unit Name

Hostname

E-mail Address

By default, the self-signed certificate is generated using the organization that Windows is registered to, and the hostname.

You must enter the hostname. You can leave the other fields blank.

Note Common Services allows you to create security certificates to enable SSL communication between your client browser and management server. Self-signed certificates are valid for five years from the date of creation. When the certificate expires, the browser prompts you to install the certificate again from the server where you have installed Common Services. In Typical mode, this certificate is automatically generated.


Password Information

This topic provides information on the usage of passwords during installation.

It contains:

Password Rules for a New Installation

Fixing Problems That Can Occur When You Change Passwords

Password Rules for an Upgrade Installation

Password Rules for a Reinstallation

Password Descriptions

Changing Passwords

Password Rules for a New Installation

The following rules apply for a new installation:

In Typical mode, admin, casuser, and System Identity account passwords are mandatory. The installation program generates guest and database passwords randomly.

In Custom mode, admin, guest, System Identity account, and database passwords are mandatory. You can either enter the casuser password or allow the installation program to randomly generate it.

Fixing Problems That Can Occur When You Change Passwords

During upgrade and reinstallation, you might change the passwords for the admin user and for the casuser account. Table A-7 lists the problems that can occur and provides steps you can take to resolve them.

Table A-7 Potential Problems 

Password Changed
Potential Problem
Workaround

admin

Service Statistics Manager loses contact with Operations Manager and Service Monitor.

If Service Statistics Manager is installed in your network, reestablish contact by performing procedures in Release Notes for Cisco Unified Service Statistics Manager 1.2.

casuser

Operations Manager credentials fail when accessing a Unified Communications Manager version 4.x system for which Windows authentication is configured.

The casuser password on the Operations Manager server must match the casuser password on the Unified Communications server. Log in to the Windows server where Unified Communications Manager is installed and update the casuser password.

Note If you do not know the casuser password on the Operations Manager server, change it; see Changing the casuser Password.


Password Rules for an Upgrade Installation

During an upgrade installation, the casuser password is requested; other passwords are retained.

Password Rules for a Reinstallation

The following rules apply for reinstallation:

In Typical mode, the installation program retains passwords for admin, guest, and database.You can either enter the casuser password or allow the installation program to randomly generate it. (See Fixing Problems That Can Occur When You Change Passwords.)

In Custom mode, you can chose to enter new admin, guest, system identity account, and database passwords or retain most existing passwords. You can either enter the casuser password or allow the installation program to randomly generate it. (See Fixing Problems That Can Occur When You Change Passwords.)

Password Descriptions

The types of passwords are as follows:

Common Services Admin Password

System Identity Account Password

Common Services Guest Password

Common Services Database Password

Common Services Admin Password

When entering the password for the admin user, include a minimum of five characters.

The admin user account is the default administrator; you must use the admin username and password to log in to Operations Manager after initial installation. (Be sure to write down the password.)

You are prompted to enter this password in both Typical and Custom installation modes.

System Identity Account Password

When entering the System Identity account password, use a minimum of five characters.

You are prompted to enter this password in both Typical and Custom installation modes.

The System Identity account is used in a multiple-server environment. Communication among multiple servers is enabled by a "trust" model addressed by certificates and shared secrets. For more information, see User Guide for CiscoWorks Common Services.


Note You need a System Identity account to configure security with Cisco Secure ACS (which must be installed on a separate server) and to configure the DCR in master and slave mode. (Operations Manager supports the DCR; Service Monitor does not support it.)


Common Services Guest Password

When entering the password for the Common Services guest account, use a minimum of five characters.

Use this password to log into the Common Services server as a guest user. You are prompted to enter this password in Custom installation mode. In Typical mode, this password is randomly generated.

Common Services Database Password

When entering database passwords:

Use a minimum of 5 characters and a maximum of 15 characters.

Do not start the password with a number.

Do not insert spaces between characters.

Do not use any special characters.

Changing Passwords

These topics explain how to change the passwords for the admin user and casuser accounts using utilities (or the Common Services user interface, if possible):

Changing the Common Services Admin Password

Changing the casuser Password

Changing the Common Services Admin Password


Note If you change the admin password and Service Statistics Manager is in your network, it will lose contact with Operations Manager. To reestablish contact, perform the procedures given in Release Notes for Cisco Unified Service Statistics Manager 1.2.


You can change your Common Services Admin password using either of the following methods:

Changing the Admin Password Using the Password Recovery Utility

Changing the Admin Password from Common Services

Changing the Admin Password Using the Password Recovery Utility


Step 1 Stop the daemon manager by entering the following at the shell prompt:

net stop crmdmgtd

Step 2 Go to NMSROOT\bin directory and enter:

NMSROOT\bin\resetpasswd username

NMSROOT is the directory where you have installed Operations Manager.

A message appears:

Enter new password for username:

Step 3 Enter the new password for username.

Step 4 Start the daemon manager by entering at the command prompt:

net start crmdmgtd 


Changing the Admin Password from Common Services


Step 1 Log in as admin.

Step 2 Select the CiscoWorks link in the upper-right corner of the Operations Manager home page.

Step 3 From the CiscoWorks home page, Select Common Services > Server > Security> Single-Server Management > Local User Setup.

The Local User Setup page appears.

Step 4 Click Modify My Profile.

The My Profile popup window appears.

Step 5 Enter the password in the Password field.

Step 6 Re-enter the password in the Verify field.

Step 7 Enter the e-mail ID in the E-mail field.

Step 8 Click OK.


Changing the casuser Password


Caution Changing the casuser password might cause Operations Manager credential failure when accessing a Unified Communications Manager version 4.x system for which Windows authentication is configured. Be prepared to log into the Windows server where Unified Communications Manager is installed to update the casuser password to match the new casuser password that you enter.


Step 1 At the command prompt, enter:

NMSROOT\setup\support\resetCasuser.exe

Three options are displayed:

1. Randomly generate the password

2. Enter the password

3. Exit.

Step 2 Enter 2, and press Enter.

A message appears, prompting you to enter the password.

Step 3 Confirm the password.

If a local user policy is configured on the Operations Manager server and you enter a password that does not match the password policy, the application exits with an error message. For more information, see Setting up Local User Policy in User Guide for CiscoWorks Common Services.