User Guide for the Cisco Secure Access Control System 5.1
Managing Network Resources
Downloads: This chapterpdf (PDF - 251.0KB) The complete bookPDF (PDF - 18.54MB) | Feedback

Managing Network Resources

Table Of Contents

Managing Network Resources

Network Device Groups

Creating, Duplicating, and Editing Network Device Groups

Deleting Network Device Groups

Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy

Deleting Network Device Groups from a Hierarchy

Network Devices and AAA Clients

Viewing and Performing Bulk Operations for Network Devices

Exporting Network Devices and AAA Clients

Performing Bulk Operations for Network Resources and Users

Exporting Network Resources and Users

Creating, Duplicating, and Editing Network Devices

Configuring Network Device and AAA Clients

Displaying Network Device Properties

Deleting Network Devices

Configuring a Default Network Device

Working with External RADIUS Servers

Creating, Duplicating, and Editing External RADIUS Servers

Deleting External RADIUS Servers


Managing Network Resources


The Network Resources drawer defines elements within the network that issue requests to ACS or those that ACS interacts with as part of processing a request. This includes the network devices that issue the requests and external servers, such as a RADIUS server that is used as a RADIUS proxy.

This drawer allows you to configure:

Network Device Groups—Logically groups the network devices, which you can then use in policy conditions.

Network Devices—Definition of all the network devices in the ACS device repository that accesses the ACS network.

Default Network Device—A default network device definition that ACS can use for RADIUS or TACACS+ requests when it does not find the device definition for a particular IP address.

External Servers—RADIUS servers that can be used as a RADIUS proxy.

When ACS receives a request from a network device to access the network, it searches the network device repository to find an entry with a matching IP address. ACS then compares the shared secret with the secret retrieved from the network device definition, and, if they match, the network device groups associated with the network device are retrieved and can be used in policy decisions. See ACS 5.x Policy Model for more information on policy decisions.

External Servers

The Network Resources drawer contains:

Network Device Groups

Network Devices and AAA Clients

Configuring a Default Network Device

Working with External RADIUS Servers

Network Device Groups

In ACS, you can define network device groups (NDGs), which are sets of devices. These NDGs provide logical grouping of devices, for example, Device Location or Type, which you can use in policy conditions. When the ACS receives a request for a device, the network device groups associated with that device are retrieved and compared against those in the policy table. With this method, you can group multiple devices and assign them the same policies. For example, you can group all devices in a specific location together and assign to them the same policy.

You can define up to 12 network device groups.

The Device Group Hierarchy is the hierarchical structure that contains the network device groups. Two of these, Location and Device Type, are predefined; you cannot change their names or delete them. You can add up to 10 additional hierarchies.

An NDG relates to any node in the hierarchy and is the entity to which devices are associated. These nodes can be any node within the hierarchy, not just leaf nodes.


Note You can have a maximum of six nodes in the NDG hierarchy, including the root node.

Related Topics

Creating, Duplicating, and Editing Network Device Groups

Deleting Network Device Groups

Creating, Duplicating, and Editing Network Device Groups


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To create, duplicate, or edit a network device group:


Step 1 Choose Network Resources > Network Device Groups.

The Network Device Groups page appears. If you have defined additional network device groups, they appear in the left navigation pane, beneath the Network Device Groups option.

Step 2 Do one of the following:

Click Create.

Check the check box next to the network device group that you want to duplicate, then click Duplicate.

Click the network device group name that you want to modify, or check the check box next to the name and click Edit.

The Hierarchy - General page appears.

Step 3 Modify the fields in the Hierarchy - General page as described in Table 7-1:

Table 7-1 Device Groups - General Page Field Descriptions

Field
Description

Name

Enter a name for the network device group (NDG).

Description

(Optional) Enter a description for the NDG.

Root Node Name/Parent

Enter the name of the root node associated with the NDG. The NDG is structured as an inverted tree, and the root node is at the top of the tree. The root node name can be the same as the NDG name. The root node name is displayed when you click an NDG in the Network Resources drawer.


Step 4 Click Submit.

The network device group configuration is saved. The Network Device Groups page appears with the new network device group configuration.


Related Topics

Network Device Groups

Deleting Network Device Groups

Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy

Performing Bulk Operations for Network Resources and Users

Deleting Network Device Groups

To delete a network device group:


Step 1 Choose Network Resources > Network Device Groups.

The Network Device Groups page appears.

Step 2 Check one or more check boxes next to the network device groups you want to delete, and click Delete.

The following error message appears:

You have requested to delete a network device group. If this group is referenced from a 
network device definition, the network device will be modified to reference the root node 
name group.
 
   

Step 3 Click OK.

The Network Device Groups page appears without the deleted network device groups.


Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy

You can arrange the network device group node hierarchy according to your needs by choosing parent and child relationships for new, duplicated, or edited network device group nodes. You can also delete network device group nodes from a hierarchy.


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To create, duplicate, or edit a network device group node within a hierarchy:


Step 1 Choose Network Resources > Network Device Groups.

The Network Device Groups page appears.

Step 2 Click Location, Device Type, or another previously defined network device group in which you want to create a new network device group, and add it to the hierarchy of that group.

The Network Device Group hierarchy page appears.

Step 3 Do one of the following:

Click Create. If you click Create when you have a group selected, the new group becomes a child of the parent group you selected. You can move a parent and all its children around in the hierarchy by clicking Select from the Create screen.

Check the check box next to the network device group name that you want to duplicate, then click Duplicate.

Click the network device group name that you want to modify, or check the check box next to the name and click Edit.

The Device Group - General page appears.

Step 4 Modify fields in the Device Groups - General page as shown in Table 7-2:

Table 7-2 Device Groups - General Page Field Descriptions

Field
Description

Name

Enter a name for the NDG.

Description

(Optional) Enter a description for the NDG.

Parent

Enter the name of the parent associated with the NDG. The NDG is structured as an inverted tree, and the parent name is the name of the top of the tree. Click Select to open the Groups dialog box from which you can select the appropriate parent for the group.


Step 5 Click Submit.

The new configuration for the network device group is saved. The Network Device Groups hierarchy page appears with the new network device group configuration.


Related Topics

Network Device Groups

Deleting Network Device Groups

Creating, Duplicating, and Editing Network Device Groups

Performing Bulk Operations for Network Resources and Users

Deleting Network Device Groups from a Hierarchy

To delete a network device group from within a hierarchy:


Step 1 Choose Network Resources > Network Device Groups.

The Network Device Groups page appears.

Step 2 Click Location, Device Type, or another previously defined network device group in which you want to edit a network device group node.

The Network Device Groups node hierarchy page appears.

Step 3 Select the nodes that you want to delete and click Delete.

The following message appears:

You have requested to delete a network device group. If this group is referenced from a 
network device definition, the network device will be modified to reference the root node 
name group.
 
   

Step 4 Click OK.

The network device group node is removed from the configuration. The Network Device Groups hierarchy page appears without the device group node that you deleted.


Network Devices and AAA Clients

You must define all devices in the ACS device repository that access the network. The network device definition can be associated with a specific IP address or a subnet mask, where all IP addresses within the subnet can access the network. The device definition includes the association of the device to network device groups (NDGs). You also configure whether the device uses TACACS+ or RADIUS, and if it is a TrustSec device.


Note When you use subnet masks, the number of unique IP addresses depends on the number of IP addresses available through the subnet mask. For example, a subnet mask of 255.255.255.0 means you have 256 unique IP addresses.

You can import devices with their configurations into the network devices repository.

When ACS receives a request, it searches the network device repository for a device with a matching IP address; then ACS compares the secret or password information against that which was retrieved from the network device definition. If the information matches, the NDGs associated with the device are retrieved and can be used in policy decisions.


Note You must install TrustSec license to enable TrustSec options. The TrustSec options only appear if you have installed the TrustSec license. For more information on TrustSec licenses, see Licensing Overview.

Viewing and Performing Bulk Operations for Network Devices

You can view the network devices and AAA clients. These are the devices sending access requests to ACS. The access requests are sent via TACACs+ or RADIUS.


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To view and import network devices:


Step 1 Choose Network Resources > Network Devices and AAA Clients.

The Network Device page appears, with any configured network devices listed. Table 7-3 provides a description of the fields in the Network Device page:

Table 7-3 Network Device Page Field Descriptions

Option
Description

Name

The user-specified name of network devices in ACS. Click a name to edit the associated network device (see Displaying Network Device Properties).

IP / Mask

Display only. The IP address or subnet mask of each network device. The first three IP addresses appear in the field, each separated by a comma (,).

If this field contains a subnet mask, all IP addresses within the specified subnet mask are permitted to access the network and are associated with the network device definition.

Note When you use subnet masks, the number of unique IP addresses depends on the number of IP addresses available through the subnet mask. For example, a subnet mask of 255.255.255.0 means you have 256 unique IP addresses.

NDG: <string>

The network device group. The two predefined NDGs are Location and Device Type. If you have defined additional network device groups, they are listed here as well.

Description

Display only. Descriptions of the network devices.


Step 2 Do any one of the following:

Click Create to create a new network device. See Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy.

Check the check box next to the network device that you want to edit and click Edit. See Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy.

Check the check box next to the network device that you want to duplicate and click Duplicate. See Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy.

Click File Operations to perform any of the following functions:

Add—Choose this option to add a list of network devices from the import file in a single shot.

Update—Choose this option to replace the list of network devices in ACS with the network devices in the import file.

Delete—Choose this option to delete from ACS the network devices listed in the import file.

See Performing Bulk Operations for Network Resources and Users for more information.


For information on how to create the import files, refer to http://www.cisco.com/en/US/
docs/net_mgmt/cisco_secure_access_control_system/5.1/sdk/cli_imp_exp.html#wp1055255
.


Timesaver To perform a bulk add, edit, or delete operation on any of the ACS objects, you can use the export file of that object, retain the header row, and create the .csv import file. However, to add an updated name or MAC address to the ACS objects, must to download and use the particular update template. Also, for the NDGs, the export template contains only the NDG name, so in order to update any other property, you must download and use the NDG update template.

Related Topics:

Network Devices and AAA Clients

Performing Bulk Operations for Network Resources and Users

Creating, Duplicating, and Editing Network Device Groups Within a Hierarchy

Exporting Network Devices and AAA Clients


Note You must turn off the popup blockers in your browser to ensure that the export process completes successfully.

Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To export a list of network devices:


Step 1 Choose Network Resources > Network Devices and AAA Clients.

The Network Device page appears.

Step 2 Choose the filter condition and the Match if operator, and enter the filter criterion that you are looking for in the text box.

Step 3 Click Go.

A list of records that match your filter criterion appears. You can export this list to a .csv file.

Step 4 Click Export to export the records to a .csv file.

A system message box appears, prompting you for an encryption password to encrypt the .csv file during file transfer.

Step 5 To encrypt the export .csv file, check the Password check box and enter the encryption password. You can optionally choose to not encrypt the file during transfer.

Step 6 Click Start Export to begin the export process.

The Export Progress window appears, displaying the progress of the export process. If any errors are encountered during this process, they are displayed in the Export Progress window. You can abort the export process at any time during this process.

Step 7 After the export process is complete, Click Save File to save the export file to your local disk.

The export file is a .csv file that is compressed as export.zip.


Performing Bulk Operations for Network Resources and Users

You can use the file operation function to perform bulk operations (add, update, and delete) for the following on your database:

Internal users

Internal hosts

Network devices

For bulk operations, you must download the .csv file template from ACS and add the records that you want to add, update, or delete to the .csv file and save it to your local disk. Use the Download Template function to ensure that your .csv file adheres to the requirements. The .csv templates for users, internal hosts, and network devices are specific to their type; for example, you cannot use a downloaded template accessed from the Users page to add internal hosts or network devices. Within the .csv file, you must adhere to these requirements:

Do not alter the contents of the first record (the first line, or row, of the .csv file).

Use only one line for each record.

Do not imbed new-line characters in any fields.

For non-English languages, encode the .csv file in utf-8 encoding, or save it with a font that supports Unicode.


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

Note Before you begin the bulk operation, ensure that your browser's popup blocker is disabled.

Step 1 Click File Operations on the Users, Network Devices, or MAC Address page of the web interface.

The Operation dialog box appears.

Step 2 Click Next to download the .csv file template if you do not have it.

Step 3 Click any one of the following operations if you have previously created a template-based .csv file on your local disk:

Add—Adds the records in the .csv file to the records currently available in ACS.

Update—Overwrites the records in ACS with the records from the .csv file.

Delete—Removes the records in the .csv file from the list in ACS.

Step 4 Click Next to move to the next page.

Step 5 Click Browse to navigate to your .csv file.

Step 6 Choose either of the following options that you want ACS to follow in case of an error during the import process:

Continue processing remaining records; successful records will be imported.

Stop processing the remaining records; only the records that were successfully imported before the error will be imported.

Step 7 Check the Password check box and enter the password to decrypt the .csv file if it is encrypted in GPG format.

Step 8 Click Finish to start the bulk operation.

The Import Progress window appears. Use this window to monitor the progress of the bulk operation. Data transfer failures of any records within your .csv file are displayed.


Note You can click the Abort button to stop importing data that is under way; however, the data that was successfully transferred is not removed from your database.

When the operation completes, the Save Log button is enabled.

Step 9 Click Save Log to save the log file to your local disk.

Step 10 Click OK to close the Import Progress window.


Note You can submit only one .csv file to the system at one time. If an operation is under way, an additional operation cannot succeed until the original operation is complete.

For information on how to create the import files, refer to http://www.cisco.com/en/US/
docs/net_mgmt/cisco_secure_access_control_system/5.1/sdk/cli_imp_exp.html#wp1055255
.


Timesaver To perform a bulk add, edit, or delete operation on any of the ACS objects, you can use the export file of that object, retain the header row, and create the .csv import file. However, to add an updated name or MAC address to the ACS objects, you must download and use the particular update template. Also, for the NDGs, the export template contains only the NDG name, so in order to update any other property, you must download and use the NDG update template.

Exporting Network Resources and Users


Note You must turn off the popup blockers in your browser to ensure that the export process completes successfully.

Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To export a list of network resources or users:


Step 1 Click Export on the Users, Network Devices, or MAC Address page of the web interface.

The Network Device page appears.

Step 2 Choose the filter condition and the Match if operator, and enter the filter criterion that you are looking for in the text box.

Step 3 Click Go.

A list of records that match your filter criterion appears. You can export these to a .csv file.

Step 4 Click Export to export the records to a .csv file.

A system message box appears, prompting you for an encryption password to encrypt the .csv file during file transfer.

Step 5 To encrypt the export .csv file, check the Password check box and enter the encryption password. You can optionally choose to not encrypt the file during transfer.

Step 6 Click Start Export to begin the export process.

The Export Progress window appears, displaying the progress of the export process. If any errors are encountered during this process, they are displayed in the Export Progress window. You can abort the export process at any time during this process.

Step 7 After the export process is complete, Click Save File to save the export file to your local disk.

The export file is a .csv file that is compressed as export.zip.


Creating, Duplicating, and Editing Network Devices

You can use the bulk import feature to import a large number of network devices in a single operation; see Performing Bulk Operations for Network Resources and Users for more information. Alternatively, you can use the procedure described in this topic to create network devices.


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

To create, duplicate, or edit a network device:


Step 1 Choose Network Resources > Network Devices and AAA Clients.

The Network Devices page appears, with a list of your configured network devices, if any.

Step 2 Do one of the following:

Click Create.

Check the check box next to the network device name that you want to duplicate, then click Duplicate.

Click the network device name that you want to modify, or check the check box next to the name and click Edit.

The first page of the Create Network Device process appears if you are creating a new network device. The Network Device Properties page for the selected device appears if you are duplicating or editing a network device.

Step 3 Modify the fields as required. For field descriptions, see Configuring Network Device and AAA Clients.

Step 4 Click Submit.

Your new network device configuration is saved. The Network Devices page appears, with your new network device configuration listed.


Related Topics

Viewing and Performing Bulk Operations for Network Devices

Configuring Network Device and AAA Clients

Configuring Network Device and AAA Clients

To display this page, choose Network Resources > Network Devices and AAA Clients, then click Create.

Table 7-4 Creating Network Devices and AAA Clients 

Option
Description
General

Name

The name of the network device. If you are duplicating a network device, you must enter a unique name as a minimum configuration; all other fields are optional.

Description

The description of the network device.

Network Device Groups 1

Location

Click Select to display the Network Device Groups selection box. Click the radio button next to the Location network device group you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

Device Type

Click Select to display the Network Device Groups selection box. Click the radio button next to the Device Type network device group you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

IP Address

IP

The IP addresses and subnet masks associated with the network device. Select to enter a single IP address or to define a range.

IP / Mask

For a single IP address, enter the address in the IP field, and click Single IP Address.

For an IP address range, click IP Range(s). You can configure up to 40 IP addresses or subnet masks for each network device. If you use a subnet mask in this field, all IP addresses within the specified subnet mask are permitted to access the network and are associated with the network device definition.

Note When you use subnet masks, the number of unique IP addresses depends on the number of IP addresses available through the subnet mask. For example, a subnet mask of 255.255.255.0 means you have 256 unique IP addresses.

The first six IP addresses appear in the field; use the scroll bar to see any additional configured IP addresses.

Note A mask is needed only for wildcards—if you want an IP address range. You cannot use an asterisk (*) as a wildcard.

Authentication Options

TACACS+

Check to use the Cisco IOS TACACS+ protocol to authenticate communication to and from the network device.

You must use this option if the network device is a Cisco device-management application, such as Management Center for Firewalls. You should use this option when the network device is a Cisco access server, router, or firewall.

TACACS+ Shared Secret

The shared secret of the network device, if you enabled the TACACS+ protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.

Single Connect Device

Check to use a single TCP connection for all TACACS+ communication with the network device. Choose one:

Legacy TACACS+ Single Connect Support

TACACS+ Draft Compliant Single Connect Support

If you disable this option, a new TCP connection is used for every TACACS+ request.

RADIUS

Check to use the RADIUS protocol to authenticate communication to and from the network device.

RADIUS Shared Secret

The shared secret of the network device, if you have enabled the RADIUS protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.

TrustSec

Appears only when you enable the Cisco TrustSec feature. Check to use TrustSec functionality on the network device. If the network device is the seed device (first device in the TrustSec network), you must also check the RADIUS check box.

Use Device ID for TrustSec Identification

Check this check box to use the device ID for TrustSec Identification. When you check this check box, the following field, Device ID, is disabled.

Device ID

The name that will be used for TrustSec identification of this device. By default, you can use the configured device name. If you want to use another name, clear the Use device name for TrustSec identification check box, and enter the name in the Identification field.

Password

The TrustSec authentication password.

TrustSec Advanced Settings

Check to display additional TrustSec fields.

Other TrustSec devices to trust this device (CTS trusted)

Specifies whether all the device's peer devices trust this device. The default is checked, which means that the peer devices trust this device, and do not change the SGTs on packets arriving from this device.

If you uncheck the check box, the peer devices repaint packets from this device with the related peer SGT.

Download peer authorization policy every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for the peer authorization policy. ACS returns this information to the device in the response to a peer policy request. The default is 1 day.

Download SGACL lists every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for SGACL lists. ACS returns this information to the device in the response to a request for SGACL lists. The default is 1 day.

Download environment data every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for environment data. ACS returns this information to the device in the response to a request for environment data. The default is 1 day.

Re-authentication every: Weeks Days Hours Minutes Seconds

Specifies the dot1x (.1x) reauthentication period. ACS configures this for the supplicant and returns this information to the authenticator. The default is 1 day.

1 The Device Type and Location network device groups are predefined at installation. You can define an additional 10 network device groups. See Creating, Duplicating, and Editing Network Device Groups for information on how to define network device groups. If you have defined additional network device groups, they appear in alphabetical order in the Network Device Groups page and in the Network Resources drawer in the left navigation pane.


Displaying Network Device Properties


Note Every ACS administrator account is assigned one or more administrative roles. Depending upon the roles assigned to your account, you may or may not be able to perform the operations or see the options described in the following procedure. See Configuring System Administrators and Accounts to configure the appropriate administrator privileges.

Choose Network Resources > Network Devices and AAA Clients, then click a device name or check the check box next to a device name, and click Edit or Duplicate.

The Network Devices and AAA Clients Properties page appears, displaying the information described in Table 7-5:

Table 7-5 Network Devices and AAA Clients Properties Page 

Option
Description

Name

The name of the network device. If you are duplicating a network device, you must enter a unique name as a minimum configuration; all other fields are optional.

Description

The description of the network device.

Network Device Groups 1

Location: Select

Click Select to display the Network Device Groups selection box. Click the radio button next to the network device group you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

Device Type: Select

Click Select to display the Network Device Groups selection box. Click the radio button next to the device type network device group that you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

IP Address

IP Address

The IP addresses and subnet masks associated with the network device. Select to enter a single IP address or to define a range.

IP / Mask

For a single IP address, enter the address in the IP field, and click Single IP Address.

For an IP address range, click IP Range(s). You can configure up to 40 IP addresses or subnet masks for each network device. If you use a subnet mask in this field, all IP addresses within the specified subnet mask are permitted to access the network and are associated with the network device definition.

Note When you use subnet masks, the number of unique IP addresses depends on the number of IP addresses available through the subnet mask. For example, a subnet mask of 255.255.255.0 means you have 256 unique IP addresses.

The first six IP addresses appear in the field; use the scroll bar to see any additional configured IP addresses.

Authentication Options

TACACS+

Check to use the Cisco IOS TACACS+ protocol to authenticate communication to and from the network device.

You must use this option if the network device is a Cisco device-management application, such as Management Center for Firewalls. You should use this option when the network device is a Cisco access server, router, or firewall.

TACACS+ Shared Secret

The shared secret of the network device, if you enabled the TACACS+ protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.

Single Connect Device

Check to use a single TCP connection for all TACACS+ communication with the network device. Choose one:

Legacy TACACS+ Single Connect Support

TACACS+ Draft Compliant Single Connect Support

If you disable this option, a new TCP connection is used for every TACACS+ request.

RADIUS

Check to use the RADIUS protocol to authenticate communication to and from the network device.

RADIUS Shared Secret

The shared secret of the network device, if you have enabled the RADIUS protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.

TrustSec

Appears only when you enable the Cisco TrustSec feature. Check to use TrustSec functionality on the network device. If the network device is the seed device (first device in the TrustSec network), you must also check the RADIUS check box.

Identification

The name that will be used for TrustSec identification of this device. By default, you can use the configured device name. If you want to use another name, clear the Use device name for TrustSec identification check box, and enter the name in the Identification field.

Password

The TrustSec authentication password.

TrustSec Advanced Settings

Check to display additional TrustSec fields.

Other TrustSec devices to trust this device

Specifies whether all the device's peer devices trust this device. The default is checked, which means that the peer devices trust this device, and do not change the SGTs on packets arriving from this device.

If you uncheck the check box, the peer devices repaint packets from this device with the related peer SGT.

Download peer authorization policy every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for the peer authorization policy. ACS returns this information to the device in the response to a peer policy request. The default is 1 day.

Download SGACL lists every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for SGACL lists. ACS returns this information to the device in the response to a request for SGACL lists. The default is 1 day.

Download environment data every: Weeks Days Hours Minutes Seconds

Specifies the expiry time for environment data. ACS returns this information to the device in the response to a request for environment data. The default is 1 day.

Re-authentication every: Weeks Days Hours Minutes Seconds

Specifies the dot1x (.1x) reauthentication period. ACS configures this for the supplicant and returns this information to the authenticator. The default is 1 day.

1 The Device Type and Location network device groups are predefined at installation. You can define an additional 10 network device groups. See Creating, Duplicating, and Editing Network Device Groups for information on how to define network device groups. If you have defined additional network device groups, they appear in the Network Device Groups page and in the Network Resources drawer in the left navigation pane, in alphabetical order.


Related Topics:

Viewing and Performing Bulk Operations for Network Devices

Creating, Duplicating, and Editing Network Device Groups

Deleting Network Devices

To delete a network device:


Step 1 Choose Network Resources > Network Devices and AAA Clients.

The Network Devices page appears, with a list of your configured network devices.

Step 2 Check one or more check boxes next to the network devices you want to delete.

Step 3 Click Delete.

The following message appears:

Are you sure you want to delete the selected item/items?
 
   

Step 4 Click OK.

The Network Devices page appears, without the deleted network devices listed. The network device is removed from the device repository.


Configuring a Default Network Device

While processing requests, ACS searches the network device repository for a network device whose IP address matches the IP address presented in the request. If the search does not yield a match, ACS uses the default network device definition for RADIUS or TACACS+ requests.

The default network device defines the shared secret to be used and also provides NDG definitions for RADIUS or TACACS+ requests that use the default network device definition.

Choose Network Resources > Default Network Device to configure the default network device. The Default Network Device page appears, displaying the information described in Table 7-6.

Table 7-6 Default Network Device Page 

Option
Description
Default Network Device

The default device definition can optionally be used in cases where no specific device definition is found that matches a device IP address.

Default Network Device Status

Choose Enabled from the drop-down list box to move the default network device to the active state.

Network Device Groups

Location

Click Select to display the Network Device Groups selection box. Click the radio button next to the Location network device group you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

Device Type

Click Select to display the Network Device Groups selection box. Click the radio button next to the Device Type network device group you want to associate with the network device. See Creating, Duplicating, and Editing Network Device Groups for information about creating network device groups.

Authentication Options

TACACS+

Check to use the Cisco IOS TACACS+ protocol to authenticate communication to and from the network device.

You must use this option if the network device is a Cisco device-management application, such as Management Center for Firewalls. You should use this option when the network device is a Cisco access server, router, or firewall.

Shared Secret

The shared secret of the network device, if you enabled the TACACS+ protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.

Single Connect Device

Check to use a single TCP connection for all TACACS+ communication with the network device. Choose one:

Legacy TACACS+ Single Connect Support

TACACS+ Draft Compliant Single Connect Support

If you disable this option, ACS uses a new TCP connection for every TACACS+ request.

RADIUS

Check to use the RADIUS protocol to authenticate communication to and from the network device.

Shared Secret

The shared secret of the network device, if you have enabled the RADIUS protocol.

A shared secret is an expected string of text, which a user must provide before the network device authenticates a username and password. The connection is rejected until the user supplies the shared secret.


Related Topics

Network Device Groups

Network Devices and AAA Clients

Creating, Duplicating, and Editing Network Device Groups

Working with External RADIUS Servers

ACS 5.1 can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, ACS receives authentication and accounting requests from the NAS and forwards them to the external RADIUS server. ACS accepts the results of the requests and returns them to the NAS. You must configure the external RADIUS servers in ACS to enable ACS to forward requests to them. You can define the timeout period and the number of connection attempts.

ACS can simultaneously act as a proxy server to multiple external RADIUS servers.


Note You can use the external RADIUS servers that you configure here in access services of the RADIUS proxy service type.

This section contains the following topics:

Creating, Duplicating, and Editing External RADIUS Servers

Deleting External RADIUS Servers

Creating, Duplicating, and Editing External RADIUS Servers

To create, duplicate, or edit an external RADIUS server:


Step 1 Choose Network Resources > External RADIUS Servers.

The External RADIUS Servers page appears with a list of configured servers.

Step 2 Do one of the following:

Click Create.

Check the check box next to the external RADIUS server that you want to duplicate, then click Duplicate.

Click the external RADIUS server name that you want to edit, or check the check box next to the name and click Edit.

The External RADIUS Servers page appears.

Step 3 Edit fields in the External Policy Servers page as shown in Table 7-7.

Table 7-7 External Policy Servers Page

Option
Description
General

Name

Name of the external RADIUS server.

Description

(Optional) The description of the external RADIUS server.

Server Connection

Server IP Address

IP address of the external RADIUS server.

Shared Secret

Shared secret between ACS and the external RADIUS server that is used for authenticating the external RADIUS server.

A shared secret is an expected string of text that a user must provide to enable the network device to authenticate a username and password. The connection is rejected until the user supplies the shared secret.

Advanced Options

Authentication Port

RADIUS authentication port number. The default is 1812.

Accounting Port

RADIUS accounting port number. The default is 1813.

Server Timeout

Number of seconds ACS waits for a response from the external RADIUS server. The default is 5 seconds. Valid values are from 1 to 120.

Connection Attempts

Number of times ACS attempts to connect to the external RADIUS server. The default is 3 attempts. Valid values are from 1 to 10.


Step 4 Click Submit to save the changes.

The external RADIUS server configuration is saved. The External RADIUS Server page appears with the new configuration.


Related Topics

RADIUS Proxy Services

RADIUS Proxy Requests

Configuring General Access Service Properties

Deleting External RADIUS Servers

Deleting External RADIUS Servers

To delete an external RADIUS server:


Step 1 Choose Network Resources > External RADIUS Servers.

The External RADIUS Servers page appears with a list of configured servers.

Step 2 Check one or more check boxes next to the external RADIUS servers you want to delete, and click Delete.

The following message appears:

Are you sure you want to delete the selected item/items?
 
   

Step 3 Click OK.

The External RADIUS Servers page appears without the deleted server(s).