Guest

Cisco Building Broadband Service Manager

Requires Immediate Attention Note: Cisco BBSM 5.1 Server

  • Viewing Options

  • PDF (141.9 KB)
  • Feedback
Requires Immediate Attention Card for Cisco Building Broadband Service Manager Server

Table Of Contents

Requires Immediate Attention Card for
Cisco Building Broadband Service Manager Server

Change Software Password

Accessing BBSM and BBSD Documentation


Requires Immediate Attention Card for
Cisco Building Broadband Service Manager Server


Change Software Password


Note For security purposes, change the Building Broadband Service Manager (BBSM) default passwords immediately!


If you use a Cisco Building Broadband Service Director (BBSD) Server to manage the BBSM Server, you must also change the BBSD account passwords on the BBSM Server. The BBSM software comes with the following defaults:

Table 1 BBSM Software Defaults

Account
Username
Password

BBSM Administrator

Administrator

changeme

MSDE System Admin

sa

changeme2

BBSD Windows Client

bbsd-client

changeme2

BBSD MSDE Client

bbsd-client

NULL



Note The BBSD Windows Client password must match the BBSD MSDE Client password. Be sure that you use the same password for both BBSD accounts.


To change the MSDE System Admin password, type the following from the command prompt:
osql -E -Q "exec sp_password 'changeme2 ','<new_password> ','sa' "

To change the BBSD MSDE Client password, type the following from the command prompt:
osql -E -Q "exec sp_password NULL,'<new_password> ','bbsd-client' "

To change either the MSDE System Admin or the BBSD MSDE Client passwords at a later time, after the default passwords have been changed, type the following from the command prompt:
osql -E -Q "exec sp_password '<old_password> ','<new_password> ','<username>' "


Note If you experience any problems, please contact the Cisco Technical Assistance Center, 24 hours a day, 7 days a week at (800) 553-2447 or send an e-mail to tac@cisco.com. You can also find useful information on the Cisco website located at www.cisco.com.


Accessing BBSM and BBSD Documentation

The enclosed Cisco Building Broadband Service Manager v5.1 CD contains the documentation you need to install and configure BBSM and BBSD Servers. You can access and print these files by going to the D:\Documentation directory and double-clicking the file name. Refer to Table 2 to determine the appropriate file name. These documents are also available online at http://www.cisco.com/univercd/cc/td/doc/product/aggr/bbsm/index.htm.


Caution To properly install your BBSM or BBSD Servers, you must read and follow the installation documentation exactly. Otherwise, your servers will not work properly.


Note The letter of your CD-ROM drive might vary. To view these PDF files, you must have Adobe Acrobat Reader installed on your PC. If you do not, go to Adobe's website at www.adobe.com, and click
Get Acrobat Reader to download a free version.


Table 2 BBSM v5.1 CD Filenames

File Name
Title
Description

install.pdf

Cisco Building Broadband Service Manager and Director Installation Guide

If you are installing BBSM or BBSD on a server, you must follow these instructions.

config.pdf

Cisco Building Broadband Service Manager Software Configuration Guide

You must configure both factory- and customer-installed BBSM Servers. Refer to this document to configure your server.

director.pdf

Cisco Building Broadband Service Director Software Configuration Guide

After you install BBSD on your server, you must refer to this document to configure your server.

relnotes.pdf

Release Notes for the Cisco Building Broadband Service Manager 5.1

Refer to this document for the latest BBSM and BBSD updates and changes.