The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco Broadband Access Center 3.7 Installation Guide describes general requirements and installation procedures for Cisco Broadband Access Center, which is referred to as Cisco BAC throughout this installation guide.
This chapter provides an outline of the other chapters in this guide, details information about related documents that support this Cisco BAC release, and demonstrates the styles and conventions used in the guide.
System integrators, network administrators, and network technicians can use this installation guide to install Cisco BAC on a Solaris or Linux operating system.
This guide includes the following sections:
This document uses the following conventions:
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
Table 1 describes the documentation that is available for this Cisco BAC release.
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
Table 1 describes additional documentation that is available for this release of Cisco BAC.
|
|
---|---|
Release Notes for Cisco Network Registrar 7.2 |
On Cisco.com: |
Installation Guide for Cisco Network Registrar, Release 7.2 |
On Cisco.com: |
User Guide for Cisco Network Registrar, Release 7.2 |
On Cisco.com: |
Command Reference Guide for Cisco Network Registrar, 7.2 |
As an HTML document that you can view in your web browser when you install the software. The document is available at Start > Programs > Network Registrar > Network Registrar CLI Reference Guide. On Cisco.com: |
Quick Start Guide for Cisco Network Registrar, Release 7.2 |
On Cisco.com: |
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.