Cisco Active Network Abstraction Reference Guide, 3.7.2
Traps
Downloads: This chapterpdf (PDF - 3.34MB) The complete bookPDF (PDF - 69.94MB) | Feedback

Traps

Table Of Contents

Traps

Cisco ASR 9000 V1 Traps

Cisco ASR 9000 V2/V3 Traps

Cisco IOS V1 Traps

Cisco IOS V2/V3 Traps

Cisco IOX V1 Traps

Cisco IOX V2/V3 Traps

Cisco MIB2  V1 Traps

Cisco MIB2  V2/V3 Traps

Cisco ACE V1 Traps

Cisco ACE  V2/V3 Traps

Cisco Nexus V1 Traps

Cisco Nexus V2/V3 Traps

Cisco ASR 9000 V1 Trap Registry Parameters

Cisco ASR 9000 V2/V3 Registry Parameters

Cisco IOS V1 Trap Registry Parameters

Cisco IOS V2/V3 Trap Registry Parameters

Cisco IOX V1 Trap Registry Parameters

Cisco IOX V2/V3 Trap Registry Parameters

Cisco MIB2 V1 Trap Registry Parameters

Cisco MIB2 V2/V3 Trap Registry Parameters

Cisco ACE V1 Trap Registry Parameters

Cisco ACE V2/V3 Trap Registry Parameters

Cisco Nexus V1 Trap Registry Parameters

Cisco Nexus V2/V3 Trap Registry Parameters


Traps


This section describes the Cisco ANA traps. Traps appear in the Cisco ANA EventVision V1 Trap, V2 Trap, and V3 Trap tabs. (For information about Cisco ANA EventVision, see the Cisco Active Network Abstraction 3.7.2 User Guide.) Trap information is presented in two forms:

Trap Tables—A section devoted to the supported traps for for both versions V1 and V2 (for example, Cisco IOS V1 Traps and Cisco IOS V2/V3 Traps). Each of these sections contains a table listing the name of each Cisco ANA-supported trap in that MIB, along with its OID, varbinds, and a short description. The trap's Short Description is what you see in a ticket's Trap tabs in Cisco ANA EventVision 3.7.2. In the trap tables in this Reference Guide, each trap's Short Description is also a link to the trap's corresponding parameters.

Registry Parameter Tables—A section devoted to the event types, event subtypes and Cisco ANA registry parameters for the traps supported in each MIB. There is one parameter table for every trap table (for example, Cisco IOS V1 Trap Registry Parameters). Each trap event can have multiple event subtypes, or states. The parameter tables indicate when each trap state is generated, and how Cisco ANA processes them (such as their severity, and whether they are ticketable, can be correlated, are autocleared, and so on).

Please note that SNMP V2 and V3 trap information is identical; the only difference is the transport and encryption options for each version. Cisco ANA natively supports SNMP informs and SNMP V3 AuthNoPriv and AuthPriv options.

Cisco ANA 3.7.x users can enable an additional IP address in the device for traps and syslogs other than the device management IP address. This new feature is called Multisource Events. When Cisco ANA 3.7.x receives a trap or syslog from that device (from the new IP) it will still recognize the device.

This chapter includes the following sections:

Cisco ASR 9000 V1 Traps

Cisco ASR 9000 V2/V3 Traps

Cisco IOS V1 Traps

Cisco IOS V2/V3 Traps

Cisco IOX V1 Traps

Cisco IOX V2/V3 Traps

Cisco MIB2  V1 Traps

Cisco MIB2  V2/V3 Traps

Cisco ACE V1 Traps

Cisco ACE  V2/V3 Traps

Cisco Nexus V1 Traps

Cisco Nexus V2/V3 Traps

Cisco ASR 9000 V1 Trap Registry Parameters

Cisco ASR 9000 V2/V3 Registry Parameters

Cisco IOS V1 Trap Registry Parameters

Cisco IOS V2/V3 Trap Registry Parameters

Cisco IOX V1 Trap Registry Parameters

Cisco IOX V2/V3 Trap Registry Parameters

Cisco MIB2 V1 Trap Registry Parameters

Cisco MIB2 V2/V3 Trap Registry Parameters

Cisco ACE V1 Trap Registry Parameters

Cisco ACE V2/V3 Trap Registry Parameters

Cisco Nexus V1 Trap Registry Parameters

Cisco Nexus V2/V3 Trap Registry Parameters


Note Cisco IOS devices, Cisco XR 12000 Series and the Cisco CRS Carrier Routing System must be configured to send traps in SNMP V2. Cisco CRS series includes Cisco CRS-1 and Cisco CRS-3 Carrier Routing Systems.


Cisco ASR 9000 V1 Traps

Table 42-1 lists the Cisco ASR 9000 SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-13.

Table 42-1 Cisco ASR 9000 V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

dot1agCfmFaultAlarm

6

1

1.0.8802.1.1.3,1.3.111.2.802.1.1.8

1.3.111.2.802.1.1.8.1.7.1.1.13

!=1

A MEP has lost contact with one or more MEPs. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP loses contact with one or more other MEPs, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. 802.1ag clause 12.14.7.7.

dot1ag CFM Fault Alarm

dot1agCfmFaultAlarm

6

1

1.0.8802.1.1.3,1.3.111.2.802.1.1.8

1.3.111.2.802.1.1.8.1.7.1.1.13

1

A MEP has lost contact with one or more MEPs. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP loses contact with one or more other MEPs, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. 802.1ag clause 12.14.7.7.

dot1ag CFM Fault Alarm


Cisco ASR 9000 V2/V3 Traps

Table 42-2 lists the Cisco ASR 9000 SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link in the Short Description column or see Table 42-14.

Table 42-2 Cisco ASR 9000 V2 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

ciscoNtpSrvStatusChange

.1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=1

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to Unknown

ciscoNtpSrvStatusChange

.1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=2

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to notRunning

ciscoNtpSrvStatusChange

.1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=3

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to notSynchronized

ciscoNtpSrvStatusChange

1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=4

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to syncToLocal

ciscoNtpSrvStatusChange

1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=5

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to syncToRefclock

ciscoNtpSrvStatusChange

1.3.6.1.4.1.9.9.168.0.1

1.3.6.1.4.1.9.9.168.1.1.11

=6

Sent whenever the value of cntpSysSrvStatus changes.

NTP Server Status Changes to syncToRemoteServer

topologyChange

1.3.6.1.2.1.17.0.2

N/A

N/A

Sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

Spanning Tree Topology Changed

warmStart

1.3.6.1.6.3.1.1.5.2

N/A

N/A

A warmStart trap signifies that the SNMP entity,supporting a notification originator application,is reinitializing itself such that its configuration is unaltered.

Warm start trap

dot1agCfmFaultAlarm

1.0.8802.1.1.3.0.11.3.111.2.802.1.1.8.0.1

1.3.111.2.802.1.1.8.1.7.1.1.13

!=1

A MEP has lost contact with one or more MEPs. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault.Whenever a MEP loses contact with one or more other MEPs, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. 802.1ag clause 12.14.7.7.

dot1ag CFM Fault Alarm

dot1agCfmFaultAlarm

1.0.8802.1.1.3.0.11.3.111.2.802.1.1.8.0.1

1.3.111.2.802.1.1.8.1.7.1.1.13

1

A MEP has lost contact with one or more MEPs. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP loses contact with one or more other MEPs, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. 802.1ag clause 12.14.7.7.

dot1ag CFM Fault Alarm


Cisco IOS V1 Traps

Table 42-3 lists the Cisco IOS SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-15.

Table 42-3 Cisco IOS V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

3

Cisco Environment Monitoring Temperature Notification.

Critical Temprature

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

1

Cisco Environment Monitoring Temperature Notification.

Normal Temprature

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

6

Cisco Environment Monitoring Temperature Notification.

Not Functioning

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

5

Cisco Environment Monitoring Temperature Notification.

Not Present

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

4

Cisco Environment Monitoring Temperature Notification.

Critical Temprature - Device Shutdown

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.3.1.6

2

Cisco Environment Monitoring Temperature Notification.

Temprature Rising

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

3

Cisco EnvMon Supply State Notification Trap.

Power Supply - Critical

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

1

Cisco EnvMon Supply State Notification Trap.

Power Supply - Normal

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

6

Cisco EnvMon Supply State Notification Trap.

Power Supply - Not Functioning

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

5

Cisco EnvMon Supply State Notification Trap.

Power Supply - Not Present

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

4

Cisco EnvMon Supply State Notification Trap.

Power Supply - Shutdown

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.5.1.3

2

Cisco EnvMon Supply State Notification Trap.

Power Supply - Warning

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.4.1.3

!= 1

Cisco private fan down trap.

Fan down trap

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3.0

1.3.6.1.4.1.9.9.13.1.4.1.3

1

Cisco private fan down trap.

Fan up trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2.0

N/A

N/A

Indicates the occurrence of a timeout for an RTT operation.

RTT Operation Timeout

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2.0

N/A

N/A

Indicates the occurrence of a threshold violation for an RTT operation

RTT Operation Threshold Violation

topologyChange

6

2

1.3.6.1.2.1.17

N/A

N/A

Sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

dot1qBridge trap

cEtherCfmCcMepUp

6

1

1.3.6.1.4.1.9.9.461

N/A

N/A

Sent when:

A remote MEP first comes up (i.e., when we receive a CC message from that MEP for the first time)

The device receives a CC message from a MEP for which it has an expired CCDB entry

A CC message is received for a remote MEP for which the device already has a CCDB entry and the port state in the received CC message is different from the cached previous state

Mep up trap

cEtherCfmCcMepDown

6

2

1.3.6.1.4.1.9.9.461

N/A

N/A

Sent when a remote MEP goes down, namely, the entry in CCDB corresponding to this MEP times out or the device receives a CC message with zero hold-time.

Mep down trap

coldStart

6

0

1.3.6.1.2.1.11.0

N/A

N/A

Indicates that the sending protocol entity is reinitializing itself such that the configuration of the agent or the protocol entity implementation may be altered.

Cold start trap

MIB2 V1 link down

2

0

1.3.6.1.6.3.1.1.5

N/A

N/A

Indicates that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. The Trap-PDU of type linkDown contains as the first element of its variable bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link down

MIB2 V1 link up

3

0

1.3.6.1.6.3.1.1.5

N/A

N/A

Indicates that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings the name and value of the ifIndex instance for the affected interface.

SNMP Link up

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

10,12,15

ima-Group-FailureAlarm v1

IMA Group Remote Failure

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

14

ima-Group-FailureAlarm v1

IMA Group Remote insufficient links trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.5

1

ima-Group-ClearingAlarm v1

IMA Group Up Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

11,16

ima-Group-FailureAlarm v1

IMA Group local Failure

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

13

ima-Group-FailureAlarm v1

IMA Group local insufficient links trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

2

ima Link ima-Link-FailureAlarm v1

Ima Link Loss of delay Frame Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

1

ima Link ima-Link-FailureAlarm v1

Ima Link Loss of ima Frame Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

5,7,9

ima Link ima-Link-FailureAlarm v1

Ima Link Rcv Failure Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

3

ima Link ima-Link-FailureAlarm v1

Ima Link Remote Failure Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.5

1

ima-Link-ClearingAlarm v1

Ima Link Up Trap

imaFailureAlarm

6

1

1.3.6.1.4.1.353.5.7.1.2

1.3.6.1.4.1.353.5.7.1.1.6

4,6,8

ima Link ima-Link-FailureAlarm v1

Ima Link Xmt Failure Trap

Cisco-UMT-state-change-v1

6

2

.1.3.6.1.4.1.9.9.483

N/A

N/A

The state of the connection between the UMTS interfaces.

Cisco UMT state Change trap

Cisco-GSM-state-change-trap-v1

6

1

.1.3.6.1.4.1.9.9.483

N/A

N/A

The state of the connection between the GSM interfaces

Cisco GSM state Change trap

Cisco-IPRAN-Backhaul-received-util-v1

6

3

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

1

When Rcvd. util changes to any of the status : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Acceptable Trap

Cisco-IPRAN-Backhaul-received-util-v1

6

3

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

2

When Rcvd. util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Warning Trap

Cisco-IPRAN-Backhaul-received-util-v1

6

3

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

3

When Rcvd. util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Overloaded Trap

Cisco-IPRAN-Backhaul-sent-util-v1

6

4

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

1

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Acceptable Trap

Cisco-IPRAN-Backhaul-sent-util-v1

6

4

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

2

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Overloaded Trap

Cisco-IPRAN-Backhaul-sent-util-v1

6

4

.1.3.6.1.4.1.9.9.483

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

3

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Warning Trap

rttMonConnectionChangeNotification

6

1

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.5

1

IPSLA echo ConnLoss Trap v2

Connection Loss detected by ipsla icmp echo trap

rttMonConnectionChangeNotification

6

1

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.5

2

IPSLA echo ConnLoss Trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

1

IPSLA IP or LSP echo Timeout trap v2

Timeout detected by ipsla icmp echo trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

2

IPSLA IP or LSP echo Timeout trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.7

1

IPSLA Threshold Notification trap v2

Threshold crossing under trap

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.7

2

IPSLA Threshold Notification trap v2

Threshold crossing over trap

rttMonVerifyErrorNotification

6

4

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.11

1

IPSLA Threshold Notification deprecated trap v2

Data corruption in rtt operation trap

rttMonVerifyErrorNotification

6

4

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.11

2

IPSLA Threshold Notification deprecated trap v2

Data corruption cleared in rtt operation trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 1

RTT MON notification

Connection Loss detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 1

RTT MON notification

Connection Loss detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 1

RTT MON notification

Timeout detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 1

RTT MON notification

Timeout detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 1

RTT MON notification

RTT threshold crossing over trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 2

RTT MON notification

RTT threshold crossing under trap

rttMonLpdDiscoveryNotification

6

6

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.13

1

IPSLA LPD Discovery trap v2

IPSLA LSP path discovery failure trap

rttMonLpdDiscoveryNotification

6

6

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.13

2

IPSLA LPD Discovery trap v2

IPSLA LSP path rediscovery trap

rttMonLpdGrpStatusNotification

6

7

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.16

3,4

IPSLA LDP Group Status trap v2

IPSLA LDP group status failure trap

rttMonLpdGrpStatusNotification

6

7

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.16

2

IPSLA LDP Group Status trap v2

IPSLA LDP group status restoration trap

cmplsFrrProtected

6

1

1.3.6.1.4.1.9.10.98

N/A

N/A

TE FRR trigger notification v1

FRR Protected Trap

cmplsFrrUnProtected

6

2

1.3.6.1.4.1.9.10.98

N/A

N/A

TE FRR trigger notification v1

FRR Unprotected Trap

cpwVcUp

6

2

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

6

1

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel down

vtpConfigRevNumberError

6

1

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A configuration revision number error notification signifies that a device has incremented its vtpConfigRevNumberErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'. The device must throttle the generation of consecutive vtpConfigRevNumberError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients.

vtp configuration revision number error trap

vtpConfigDigestError

6

2

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A configuration digest error notification signifies that a device has incremented its vtpConfigDigestErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'. The device must throttle the generation of consecutive vtpConfigDigestError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients).

vtp configuration digest error trap

vtpVersionOneDeviceDetected

6

6

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A VTP version one device detected notification is generated by a device when:

A. A management domain has been put into version 2 mode (as accessed by managementDomainVersionInUse).

B. 15 minutes has passed since (A) occurred.

C. A version 1 PDU is detected on a trunk on the device that is in that management domain which has a lower revision number than the current configuration.

vtp VersionOne Device Detected trap

vtpLocalModeChanged

6

8

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A vtpLocalModeChanged notification is generated by a device when the value of the object managementDomainLocalMode is changed.

vtp Local Mode Changed trap

vtpVersionInUseChanged

6

9

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A vtpVersionInUseChanged notification is generated by a device when the value of the object managementDomainVersionInUse is changed.

vtp VersionInUse Changed trap

vlanTrunkPortDynamicStatusChange

6

7

1.3.6.1.4.1.9.9.46.2

1.3.6.1.4.1.9.9.46.1.6.1.1.14

1

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to trunking

vlanTrunkPortDynamicStatusChange

6

7

1.3.6.1.4.1.9.9.46.2

1.3.6.1.4.1.9.9.46.1.6.1.1.14

2

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to not trunking

crepLinkStatus

6

1

.1.3.6.1.4.1.9.9.601

1.3.6.1.4.1.9.9.601.1.2.1.1.3

5

Cisco REP link status change trap

REP port state fully operational Trap

crepLinkStatus

6

1

.1.3.6.1.4.1.9.9.601

1.3.6.1.4.1.9.9.601.1.2.1.1.3

!=5

Cisco REP link status change trap

REP port state not operational Trap

crepPortRoleChange

6

3

.1.3.6.1.4.1.9.9.601

1.3.6.1.4.1.9.9.601.1.2.1.1.4

1

Cisco REP port role change trap

REP port role failed Trap

crepPortRoleChange

6

3

.1.3.6.1.4.1.9.9.601

1.3.6.1.4.1.9.9.601.1.2.1.1.4

!=1

Cisco REP port role change trap

REP port role clear Trap

ciscoSonetVTStatusChange

6

4

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.3.1.1.1.2

!=1

VT Status is down

Cisco Sonet vt status changed to error

ciscoSonetVTStatusChange

6

4

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.3.1.1.1.2

1

VT Status is down

Cisco Sonet vt status changed to clear

cEtherCfmCcMepUp

6

1

.1.3.6.1.4.1.9.9.461.0.0.1

N/A

N/A

mep up

CFM cc mep up trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

5

timeout

CFM cc mep down due to timeout trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

4

lastgasp

CFM cc mep down due to last gasp trap

cEtherCfmCcCrossconnect

6

3

.1.3.6.1.4.1.9.9.461.0.0.3

N/A

N/A

cross-connected service error trap

CFM cc cross-connected service error trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

8

cross-connected service error trap clear

CFM cc cross-connected service error trap clear

cEtherCfmCcLoop

6

4

.1.3.6.1.4.1.9.9.461.0.0.4

N/A

N/A

loop trap

CFM cc loop trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

7

loop trap clear

CFM cc loop trap clear

cEtherCfmCcConfigError

6

5

.1.3.6.1.4.1.9.9.461.0.0.5

N/A

N/A

config error trap

CFM cc config error trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

6

config error trap clear

CFM cc config error trap clear

cEtherCfmXCheckMissing

6

6

.1.3.6.1.4.1.9.9.461.0.0.6

N/A

N/A

mep missing trap

CFM crossconnect mep missing trap

cEtherCfmXCheckUnknown

6

7

.1.3.6.1.4.1.9.9.461.0.0.7

N/A

N/A

mep unknown trap

CFM crossconnect mep unknown trap

cEtherCfmCcMepDown

6

2

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

9

mep unknown trap clear

CFM crossconnect mep unknown trap clear

cEtherCfmXCheckServiceUp

6

8

.1.3.6.1.4.1.9.9.461.0.0.8

N/A

N/A

ICfmServiceOid

CFM crossconnect mep service up trap

vrrpTrapAuthFailure

6

2

1.3.6.1.2.1.68

N/A

N/A

vrrp trap auth failure trap

Vrrp trap auth failure trap

vrrpTrapNewMaster

6

1

1.3.6.1.2.1.68

N/A

N/A

vrrp trap new master trap

Vrrp trap new master trap

cdot3OamNonThresholdEvent

6

2

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

256

Local or remote non-threshold crossing event is detected.

OAM Non-threshold crossing link fault trap

cdot3OamNonThresholdEvent

6

2

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

257

Local or remote non-threshold crossing event is detected.

OAM Non-threshold crossing dying gasp trap

cdot3OamNonThresholdEvent

6

2

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

258

Local or remote non-threshold crossing event is detected.

OAM Non-threshold crossing critical Link trap

cdot3OamThresholdEvent

6

1

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

1

Local or remote threshold crossing event is detected.

OAM threshold errored Symbol trap

cdot3OamThresholdEvent

6

1

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

2

Local or remote threshold crossing event is detected.

OAM threshold errored Frame Period trap

cdot3OamThresholdEvent

6

1

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

3

Local or remote threshold crossing event is detected.

OAM threshold errored Frame trap

cdot3OamThresholdEvent

6

1

1.3.6.1.4.1.9.10.136

1.3.6.1.4.1.9.10.136.1.6.1.4

4

Local or remote threshold crossing event is detected.

OAM threshold errored Frame Seconds trap

cbfDefineFileCompletion

6

1

1.3.6.1.4.1.9.9.81.2

N/A

N/A

A cbfDefineFileCompletion notification is sent on the following conditions :

- completion of a file consumption operation in case of ephemeral files.

- completion of file creation operation in case of volatile or permanent files.

- any error during file creation.

CBF File operation state indicator

cbgpBackwardTransition

6

2

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification object ID.

Cisco BGP backward transition trap

cbgpFsmStateChange

6

1

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP down trap

cbgpFsmStateChange

6

1

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP established trap

cbgpPrefixThresholdExceeded

6

3

1.3.6.1.4.1.9.9.187

N/A

N/A

The cbgpPrfefixMaxThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family

Cisco BGP prefix threshold exceeded

cbgpPrefixThresholdClear

6

4

1.3.6.1.4.1.9.9.187

N/A

N/A

The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of bgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, bgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification object ID.

Cisco BGP prefix threshold clear

ciscoConfigManEvent

6

1

1.3.6.1.4.1.9.9.43.2

N/A

N/A

Notification of a configuration management event as recorded in ccmHistoryEventTable.

Cisco Configuration management event notification

cefcFanTrayStatusChange

6

6

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.4.1.1.1

!=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status down

cefcFanTrayStatusChange

6

6

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.4.1.1.1

=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status up

cefcFRUInserted

6

3

1.3.6.1.4.1.9.9.117.2

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

6

4

1.3.6.1.4.1.9.9.117.2

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

cefcModuleStatusChange

6

1

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

6

1

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

6

2

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status down

cefcPowerStatusChange

6

2

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status up

entSensorThresholdNotification

6

1

1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold

sensor value crossed threshold in entSensorThresholdTable

ciscoFlashCopyCompletionTrap

6

1

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.1.1.8

!= (0 or 1 or 2)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy failed

ciscoFlashCopyCompletionTrap

6

1

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=2

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy completion

ciscoFlashCopyCompletionTrap

6

1

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=(0 or 1)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy in progress

ciscoFlashDeviceChangeTrap

6

4

1.3.6.1.4.1.9.9.10.1.3

N/A

N/A

A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.

Cisco Flash device changed

ciscoFlashDeviceInsertedNotif

6

5

1.3.6.1.4.1.9.9.10.1.3

N/A

N/A

A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotif

6

6

1.3.6.1.4.1.9.9.10.1.3

N/A

N/A

A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.

Cisco Flash device removed

ciscoFlashDeviceInsertedNotifRev1

6

7

1.3.6.1.4.1.9.9.10.1.3

N/A

N/A

A ciscoFlashDeviceInsertedNotifRev1 notification is sent whenever a removable Flash device is inserted.

The ciscoFlashDeviceInsertedNotifRev1 depcrecates ciscoFlashDeviceInsertedNotif since it uses

ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotifRev1

6

8

1.3.6.1.4.1.9.9.10.1.3

N/A

N/A

A ciscoFlashDeviceRemovedNotifRev1 notification is sent whenever a removable Flash device is removed.

The ciscoFlashDeviceRemovedNotifRev1 depcrecates ciscoFlashDeviceRemovedNotif since it uses

ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device removed

ciscoFlashMiscOpCompletionTrap

6

3

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

!= (1 or 2)

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation failed

ciscoFlashMiscOpCompletionTrap

6

3

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation completed

ciscoFlashMiscOpCompletionTrap

6

3

1.3.6.1.4.1.9.9.10.1.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=1

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation in progress

chassisAlarmOff

6

6

1.3.6.1.4.1.9.5

N/A

N/A

chassis alarm trap

chassis alarm off

chassisAlarmOn

6

5

1.3.6.1.4.1.9.5

N/A

N/A

chassis alarm trap

chassis alarm on

cPimNbrLoss

6

2

1.3.6.1.4.1.9.10.119

N/A

N/A

A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.

Cisco PIM neighbor lost

ciscoPingCompletion

6

1

1.3.6.1.4.1.9.9.16.2

N/A

N/A

A ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated.

Cisco ping completion

ciscoSonetSectionStatusChange

6

1

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.1.2.1.1.1

!=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value more than 1.

Cisco Sonet section status changed to error

ciscoSonetSectionStatusChange

6

1

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.1.2.1.1.1

=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value 1.

Cisco Sonet section status changed to clear

ciscoSonetLineStatusChange

6

2

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.1.3.1.1.1

!=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value more than 1.

Cisco Sonet line status changed to error

ciscoSonetLineStatusChange

6

2

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.1.3.1.1.1

=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value 1.

Cisco Sonet line status changed to clear

ciscoSonetPathStatusChange

6

3

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.2.1.1.1.2

!=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value more than 1.

Cisco Sonet path status changed to error

ciscoSonetPathStatusChange

6

3

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.2.1.1.1.2

=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value 1.

Cisco Sonet path status changed to clear

mplsLdpFailedInitSessionThresholdExceeded

6

1

1.3.6.1.4.1.9.10.65.2

N/A

N/A

This notification is generated when the value of the 'mplsLdpEntityPVLimitMismatchTrapEable' object is 'enabled(1)' and the value of the object, 'mplsLdpEntityFailedInitSessionThreshold' has been exceeded.

MPLS LDP init session threshold exceeded Trap

mplsLdpSessionDown

6

4

1.3.6.1.4.1.9.10.65.2

N/A

N/A

Generation of this trap occurs when the 'mplsLdpSessionUpDownTrapEnable' object is 'enabled(1)' and the value of mplsLdpSessionState changes from 'operational(5)' to any other state.

MPLS LDP session down Trap

mplsLdpSessionUp

6

3

1.3.6.1.4.1.9.10.65.2

N/A

N/A

Generation of this trap occurs when the 'mplsLdpSessionUpDownTrapEnable' object is 'enabled(1)' and the value of mplsLdpSessionState changes from any state accept 'nonexistent(1)' to 'operational.

MPLS LDP session up Trap

mplsTunnelUp

6

1

1.3.6.1.3.95.3

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS-TE tunnel up trap

mplsTunnelDown

6

2

1.3.6.1.3.95.3

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS-TE tunnel down trap

mplsTunnelRerouted

6

3

1.3.6.1.3.95.3

N/A

N/A

This notification is generated when a tunnel is rerouted or re-optimized. If the Actual Path is used, then this object MAY contain the new path for this tunnel some time after this trap is issued by the agent.

MPLS-TE tunnel rerouted trap

ciscoIpMRouteMissingHeartBeats

6

1

1.3.6.1.4.1.9.10.2.3.1

N/A

N/A

A notification is sent if a multicast router with this feature enabled failed to receive configured number of heartbeat packets from heartbeat sources within a configured time interval

Failed receive multicast router heartbeat

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2.

1.3.6.1.4.1.9.9.176.1.1.4

2

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Disabled

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2

1.3.6.1.4.1.9.9.176.1.1.4

5

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Cold

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2.

1.3.6.1.4.1.9.9.176.1.1.4

9

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Hot

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2

1.3.6.1.4.1.9.9.176.1.1.4

2

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Disabled

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2

1.3.6.1.4.1.9.9.176.1.1.4

5

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Cold

ciscoRFProgressionNotif

6

2

1.3.6.1.4.1.9.9.176.2

1.3.6.1.4.1.9.9.176.1.1.4

9

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Hot

cvsVSLConnectionChangeNotif

6

1

1.3.6.1.4.1.9.9.388

N/A

N/A

when VSL connection is down

VSL Connection Changed: Down

cvsVSLConnectionChangeNotif

6

1

1.3.6.1.4.1.9.9.388

N/A

N/A

when VSL connection is up

VSL Connection Change: Up

topologyChange

6

2

1.3.6.1.2.1.17

N/A

N/A

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

dot1qBridge trap

cEtherCfmCcMepUp

6

1

1.3.6.1.4.1.9.9.461.0

N/A

N/A

This notification is generated in the following cases: when a remote MEP first comes up, that is when we receive CC message from that MEP for the first time. - when the device receives a CC message from a MEP for which t has an expired CCDB entry. when a CC message is received for a remote MEP for which the device already has a CCDB entry and the port-state in the received CC message is different from the cached previous state.

Mep up trap

cEtherCfmCcMepDown

6

2

1.3.6.1.4.1.9.9.461.0

N/A

N/A

This notification is generated when a remote MEP goes down; i.e. the entry in CCDB corresponding to this MEP times out or the device receives a CC message with zero hold-time.

Mep down trap

coldStart

6

0

1.3.6.1.2.1.11

N/A

N/A

This trap signifies that the sending protocol entity is reinitializing itself such that the agent s configuration or the protocol entity implementation may be altered.

Cold start trap

cHsrpStateChange

6

1

1.3.6.1.4.1.9.9.106.2

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 5

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state standby

cHsrpStateChange

6

1

1.3.6.1.4.1.9.9.106.2

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 5

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state non active

cHsrpStateChange

6

1

1.3.6.1.4.1.9.9.106.2

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 6

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state active

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 3

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Critical

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 1

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Normal

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 6

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Not Functioning

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 5

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Not Present

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 4

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Shutdown

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.4.1.3

= 2

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Warning

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 3

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Critical

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 1

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Normal

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 6

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Not Functioning

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 5

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Not Present

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 4

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Shutdown

ciscoEnvMonRedundantSupplyNotification

6

5

1.3.6.1.4.1.9.9.13.3

1.3.6.1.4.1.9.9.13.1.5.1.3

= 2

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Warning

newRoot

6

1

1.3.6.1.2.1.17

N/A

N/A

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer,immediately subsequent to its election.Implementation of this trap is optional.

new root trap

stpxInconsistencyUpdate

6

1

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.3.1.1.3

=1

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency.The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

stpx port inconsistency discovered

stpxInconsistencyUpdate

6

1

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.3.1.1.4

=2

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions betweendifferent types of inconsistency.The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

stpx port inconsistency resolved

stpxLoopInconsistencyUpdate

6

3

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 1

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instanceof stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency discovered

stpxLoopInconsistencyUpdate

6

3

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 2

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyStateis created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicateswhich Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency resolved

stpxRootInconsistencyUpdate

6

2

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 1

A stpxRootInconsistencyUpdate notification is sent by bridge when an instance of stpxRootInconsistencyStateis created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency discovered

stpxRootInconsistencyUpdate

6

2

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 2

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency resolved

vtpConfigRevNumberError

6

1

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A configuration revision number error notification signifies that a device has incremented its vtpConfigRevNumberErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'. The device must throttle the generation of consecutive vtpConfigRevNumberError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients.)

vtp configuration revision number error trap

vtpConfigDigestError

6

2

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A configuration digest error notification signifies that a device has incremented its vtpConfigDigestErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'.The device must throttle the generation of consecutive vtpConfigDigestError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients).

vtp configuration digest error trap

ciscoEnvMonShutdownNotification

6

1

1.3.6.1.4.1.9.9.13.3

N/A

N/A

A ciscoEnvMonShutdownNotification is sent if the environmental monitor detects a test point reaching a critical state and is about to initiate a shutdown. This notification contains no objects so that it may be encoded and sent in the shortest amount of time possible. Even so, management applications should not rely on receiving such a notification as it may not be sent before the shutdown completes.

cisco EnvMon Shutdown Notification Trap

caemTemperatureNotification

6

1

1.3.6.1.4.1.9.9.61.2

N/A

N/A

A caemTemperatureNotification is sent if the over temperature condition is detected in the managed system. This is a replacement for the ciscoEnvMonTemperatureNotification trap because the information 'ciscoEnvMonTemperatureStatusValue' required by the trap is not available in the managed system.

caem Temperature Notification Trap

caemVoltageNotification

6

2

1.3.6.1.4.1.9.9.61.2

N/A

N/A

A caemVoltageNotification is sent if the over voltage condition is detected and ciscoEnvMonVoltageState is not set to 'notPresent' in the managed system. This is a replacement for the ciscoEnvMonVoltageNotification trap because the information 'ciscoEnvMonVoltageStatusValue' required by the trap is not available in the managed system.

caem Voltage Notification Trap

cmnMacChangedNotification

6

1

1.3.6.1.4.1.9.9.215.2

N/A

N/A

This notification is generated when there is enough MAC address information to fully occupy a maximum size SNMP trapmessage. This notification is also generated when there is at least one MAC address changed or removed and the amount of time elapsed from the previous notification is greater than the maximum wait time denoted by cmnNotificationInterval object. If there are more MAC addresses information than can fit into one cmmHistTrapContent object, then multiple notifications will be generated.

cmn Mac Changed Notification Trap

cmnMacMoveNotification

6

2

1.3.6.1.4.1.9.9.215.2

N/A

N/A

cmnMacMoveNotification is generated when a MAC address is moved between two interfaces.

cmn Mac Move Notification Trap

vtpVersionOneDeviceDetected

6

6

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A VTP version one device detected notification is generated by a device when:

a) a management domain has been put into version 2 mode (as accessed by managementDomainVersionInUse).

b) 15 minutes has passed since a).

c) a version 1 PDU is detected on a trunk on the device that is in that management domain which has a lower revision number than the current configuration.

vtp VersionOne Device Detected trap

vtpLocalModeChanged

6

8

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A vtpLocalModeChanged notification is generated by a device when the value of the object managementDomainLocalMode is changed.

vtp Local Mode Changed trap

vtpVersionInUseChanged

6

9

1.3.6.1.4.1.9.9.46.2

N/A

N/A

A vtpVersionInUseChanged notification is generated by a device when the value of the objectmanagementDomainVersionInUse is changed.

vtp VersionInUse Changed trap

vlanTrunkPortDynamicStatusChange

6

7

1.3.6.1.4.1.9.9.46.2

1.3.6.1.4.1.9.9.46.1.6.1.1.14

= 1

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to trunking

vlanTrunkPortDynamicStatusChange

6

7

1.3.6.1.4.1.9.9.46.2

1.3.6.1.4.1.9.9.46.1.6.1.1.14

2

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of

vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to not trunking

cpsSecureMacAddrViolation

6

1

1.3.6.1.4.1.9.9.315.0

N/A

N/A

The address violation notification is generated when port security address violation is detected on a secure non-trunk, access interface (that carries a single vlan) and the cpsIfViolationAction is set to 'dropNotify'.

cps Secure MacAddr Violation Trap

cpsIfVlanSecureMacAddrViolation

6

3

1.3.6.1.4.1.9.9.315.0

N/A

N/A

The address violation notification is generated when port security address violation is detected on a multi-vlan interface and the cpsIfViolationAction is set to 'dropNotify'.

cps IfVlan Secure MacAddr Violation Trap

clcVlanMacLimitNotif

6

1

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbVlanMacUsage) has crossed the configured limit of MAC addresses (clcVlanMaxMacLimit) either rising above or falling below it.

cisco L2 Control VlanMacLimit Notif Trap

clcVlanMacLimitHighNotif

6

2

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbVlanMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcVlanMacLimitHigh) either rising above or falling below it.

cisco L2 Control VlanMacLimit High Notif Trap

clcIfMacLimitLowNotif

6

3

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfMacUsage) has crossed the configured lower threshold limit of MAC addresses (clcIfMacLimitLow) either rising above or falling below it.

cisco L2 Control IfMacLimit Low Notif Trap

clcIfMacLimitHighNotif

6

4

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcIfMacLimitHigh) either rising above or falling below it.

cisco L2 Control IfMacLimit High Notif Trap

clcIfVlanMacLimitLowNotif

6

5

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfVlanMacUsage) has crossed the configured lower threshold limit of MAC addresses (clcIfVlanMacLimitLow) either rising above or falling below it.

cisco L2 Control IfVlanMacLimit Low Notif Trap

clcIfVlanMacLimitHighNotif

6

6

1.3.6.1.4.1.9.9.313

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfVlanMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcIfVlanMacLimitHigh) either rising above or falling below it.

cisco L2 Control IfVlanMacLimit High Notif Trap

csbSourceAlertEvent

6

1

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IP address). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert off trap

csbSourceAlertEvent

6

1

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IPaddress). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert on trap

csbSourceAlertEvent

6

1

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IP address). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert informational trap

csbDynamicBlackListEvent

6

2

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when a source is added to or removed from the blacklist table. Dynamic blacklists put in place automatically (subject to a set of configurable constraints) by the SBC when it detects an attempt to disrupt traffic flowing through it. Dynamic blacklisting does not require management interference. Blacklist table is restricted only to SBC service. This table is not made available to NM. For more Information on Dynamic Blacklisting refer to the following link: http://lbj.cisco.com/push_targets1/ucdit/cc/td/doc/product/ioxsoft/iox34/cgcr34/sbc_c34/sbc34dos.htm or Search cisco.com using keywords 'DoS Prevention and Dynamic Blacklisting'.

Cisco SBC dynamic blacklist trap

csbAdjacencyStatus

6

3

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state up trap

csbAdjacencyStatus

6

3

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state down trap

csbAdjacencyStatus

6

3

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state informational trap

csbServiceStateEvent

6

4

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.28

= 1

This notification is generated when there is a change in the state of a service card. The changes in the service state are:

-Active

-Standby

Cisco SBC service state up trap

csbServiceStateEvent

6

4

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.28

= 3

This notification is generated when there is a change in the state of a service card. The changes in the service state are:

-Active

-Standby

Cisco SBC service state down trap

csbServiceStateEvent

6

4

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.28

= 2

This notification is generated when there is a change in the state of a service card. The changes in the service state are:

-Active

-Standby

Cisco SBC service state informational trap

csbSystemCongestionAlarmEvent

6

5

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion cleared trap

csbSystemCongestionAlarmEvent

6

5

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion raised trap

csbSystemCongestionAlarmEvent

6

5

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion informational trap

csbSLAViolationRev1

6

10

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth etc. This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation off trap

csbSLAViolationRev1

6

10

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth etc. This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation on trap

csbSLAViolationRev1

6

10

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth etc. This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation informational trap

csbRadiusConnectionStatus

6

7

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state up trap

csbRadiusConnectionStatus

6

7

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state down trap

csbRadiusConnectionStatus

6

7

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state informational trap

csbH248ControllerStatus

6

9

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state up trap

csbH248ControllerStatus

6

9

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state down trap

csbH248ControllerStatus

6

9

1.3.6.1.4.1.9.9.658

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state informational trap


Cisco IOS V2/V3 Traps

Table 42-4 lists the Cisco IOS SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-16.

Table 42-4 Cisco IOS V2/V3 Traps  

Trap Name
Trap OID
Subtype
Varbind OID
Subtype
Varbind Value
Description
Short Description

cbfDefineFileCompletion

1.3.6.1.4.1.9.9.81.2.0.1

N/A

N/A

A cbfDefineFileCompletion notification is sent on the following conditions: completion of a file consumption operation in case of ephemeral files: completion of file creation operation in case of volatile or permanent files: any error during file creation.

CBF File operation state indicator

cbgpBackwardTransition

1.3.6.1.4.1.9.9.187.0.2

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification Object Identifier.

Cisco BGP backward transition trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP down trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP established trap

cbgpPrefixThresholdExceeded

1.3.6.1.4.1.9.9.187.0.3

N/A

N/A

The cbgpPrfefixMaxThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family

Cisco BGP prefix threshold exceeded

cbgpPrefixThresholdClear

1.3.6.1.4.1.9.9.187.0.4

N/A

N/A

The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of bgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, bgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification Object Identifier.

Cisco BGP prefix threshold clear

ccCopyCompletion

1.3.6.1.4.1.9.9.96.2.1.1

N/A

N/A

A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the ccCopyState is success

Config-copy request completion

ciscoConfigManEvent

1.3.6.1.4.1.9.9.43.2.0.1

N/A

N/A

Notification of a configuration management event as recorded in ccmHistoryEventTable.

Cisco Configuration management event notification

cefcFanTrayStatusChange

1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

!=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status down

cefcFanTrayStatusChange

1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status up

cefcFRUInserted

1.3.6.1.4.1.9.9.117.2.0.3

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

1.3.6.1.4.1.9.9.117.2.0.4

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status down

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status up

entSensorThresholdNotification

1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crossesthe threshold.

sensor value crossed threshold in entSensorThresholdTable

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

!= (0 or 1 or 2)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy failed

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=2

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy completion

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=(0 or 1)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy in progress

ciscoFlashDeviceChangeTrap

1.3.6.1.4.1.9.9.10.1.3.0.4

N/A

N/A

A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.

Cisco Flash device changed

ciscoFlashDeviceInsertedNotif

1.3.6.1.4.1.9.9.10.1.3.0.5

N/A

N/A

A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotif

1.3.6.1.4.1.9.9.10.1.3.0.6

N/A

N/A

A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.

Cisco Flash device removed

ciscoFlashDeviceInsertedNotifRev1

1.3.6.1.4.1.9.9.10.1.3.0.7

N/A

N/A

A ciscoFlashDeviceInsertedNotifRev1 notification is sent whenever a removable Flash device is inserted.The ciscoFlashDeviceInsertedNotifRev1 depcrecates ciscoFlashDeviceInsertedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotifRev1

1.3.6.1.4.1.9.9.10.1.3.0.8

N/A

N/A

A ciscoFlashDeviceRemovedNotifRev1 notification is sent whenever a removable Flash device is removed. The ciscoFlashDeviceRemovedNotifRev1 depcrecates ciscoFlashDeviceRemovedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device removed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

!= (1 or 2)

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation failed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation completed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=1

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation in progress

chassisAlarmOff

1.3.6.1.4.1.9.5.0.6

N/A

N/A

chassis alarm trap

chassis alarm off

chassisAlarmOn

1.3.6.1.4.1.9.5.0.5

N/A

N/A

chassis alarm trap

chassis alarm on

cPimNbrLoss

1.3.6.1.4.1.9.10.119.0.2

N/A

N/A

A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.

Cisco PIM neighbor lost

ciscoPingCompletion

1.3.6.1.4.1.9.9.16.2.0.1

N/A

N/A

A ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated.

Cisco ping completion

ciscoSonetSectionStatusChange

1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

!=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value more than 1.

Cisco Sonet section status changed to error

ciscoSonetSectionStatusChange

1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value 1.

Cisco Sonet section status changed to clear

ciscoSonetLineStatusChange

1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

!=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value more than 1.

Cisco Sonet line status changed to error

ciscoSonetLineStatusChange

1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value 1.

Cisco Sonet line status changed to clear

ciscoSonetPathStatusChange

1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

!=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value more than 1.

Cisco Sonet path status changed to error

ciscoSonetPathStatusChange

1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value 1.

Cisco Sonet path status changed to clear

mplsLdpFailedInitSessionThresholdExceeded

1.3.6.1.4.1.9.10.65.2.0.1

N/A

N/A

This notification is generated when the value of the 'mplsLdpEntityPVLimitMismatchTrapEnable' object is 'enabled(1)' and the value of the object, 'mplsLdpEntityFailedInitSessionThreshold' has been exceeded.

MPLS LDP init session threshold exceeded Trap

mplsLdpSessionDown

1.3.6.1.4.1.9.10.65.2.0.4

N/A

N/A

Generation of this trap occurs when the 'mplsLdpSessionUpDownTrapEnable' object is 'enabled(1)' and the value of mplsLdpSessionState changes from 'operational(5)' to any other state.

MPLS LDP session down Trap

mplsLdpSessionUp

1.3.6.1.4.1.9.10.65.2.0.3

N/A

N/A

Generation of this trap occurs when the 'mplsLdpSessionUpDownTrapEnable' object is 'enabled(1)' and the value of mplsLdpSessionState changes from any state accept 'nonexistent(1)' to 'operational.

MPLS LDP session up Trap

mplsTunnelUp

1.3.6.1.3.95.3.0.1

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS TE tunnel up trap

mplsTunnelDown

1.3.6.1.3.95.3.0.2

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS TE tunnel down trap

mplsTunnelRerouted

1.3.6.1.3.95.3.0.3

N/A

N/A

This notification is generated when a tunnel is rerouted or re-optimized. If the Actual Path is used, then this object MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS TE tunnel rerouted trap

ciscoIpMRouteMissingHeartBeats

1.3.6.1.4.1.9.10.2.3.1.0.1

N/A

N/A

A notification is sent if a multicast router with this feature enabled failed to receive configured number of heartbeat packets from heartbeat sources within a configured time interval

Failed receive multicast router heartbeat

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

2

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Disabled

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

5

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Cold

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

9

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Hot

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

2

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Disabled

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

5

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Cold

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

1.3.6.1.4.1.9.9.176.1.1.4.0

9

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Hot

cvsVSLConnectionChangeNotif

1.3.6.1.4.1.9.9.388.0.1

1.3.6.1.4.1.9.9.388.1.3.1.1.3.71

0

when VSL connection is down

VSL Connection Changed: Down

cvsVSLConnectionChangeNotif

1.3.6.1.4.1.9.9.388.0.1

1.3.6.1.4.1.9.9.388.1.3.1.1.3.71

1

when VSL connection is up

VSL Connection Change: Up

topologyChange

1.3.6.1.2.1.17.0.2

N/A

N/A

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

dot1qBridge trap

cEtherCfmCcMepUp

1.3.6.1.4.1.9.9.461.0.0.1

N/A

N/A

This notification is generated in the following cases: when a remote MEP first comes up, that is when we receive CC message from that MEP for the first time; when the device receives a CC message from a MEP for which it has an expired CCDB entry; when a CC message is received for a remote MEP for which the device already has a CCDB entry and the port-state in the received CC message is different from the cached previous state

Mep up trap

cEtherCfmCcMepDown

1.3.6.1.4.1.9.9.461.0.0.2

N/A

N/A

This notification is generated when a remote MEP goes down; i.e. the entry in CCDB corresponding to this MEP times out or the device receives a CC message with zero hold-time

Mep down trap

coldStart

1.3.6.1.2.1.11.0.0

N/A

N/A

This trap signifies that the sending protocol entity is reinitializing itself such that the agent s configuration or the protocol entity implementation may be altered.

Cold start trap

cHsrpStateChange

1.3.6.1.4.1.9.9.106.2.0.1

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 5

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state standby

cHsrpStateChange

1.3.6.1.4.1.9.9.106.2.0.1

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 5

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state non active

cHsrpStateChange

1.3.6.1.4.1.9.9.106.2.0.1

1.3.6.1.4.1.9.9.106.1.2.1.1.15

= 6

A cHsrpStateChange notification is sent when a cHsrpGrpStandbyState transitions to either active or standby state, or leaves active or standby state. There will be only one notification issued when the state change is from standby to active and vice versa.

Cisco hsrp state active

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 3

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Critical

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 1

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Normal

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 6

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Not Functioning

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 5

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Not Present

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 4

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Shutdown

ciscoEnvMonFanNotification

1.3.6.1.4.1.9.9.13.3.0.4

1.3.6.1.4.1.9.9.13.1.4.1.3

= 2

A ciscoEnvMonFanNotification is sent if any one of the fans in the fan array (where existent) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Cisco Environment Monitoring Fan Notification - Warning

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 3

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Critical

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 1

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Normal

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 6

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Not Functioning

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 5

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sentthan does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Not Present

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 4

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Shutdown

ciscoEnvMonRedundantSupplyNotification

1.3.6.1.4.1.9.9.13.3.0.5

1.3.6.1.4.1.9.9.13.1.5.1.3

= 2

A ciscoEnvMonRedundantSupplyNotification is sent if the redundant power supply (where exists) fails. Since such a notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Redundant Supply State - Warning

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 3

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Critical Temperature

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 1

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Normal Temperature

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 6

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Not Functioning

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 5

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Not Present

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 4

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Critical Temperature - Device Shutdown

ciscoEnvMonTemperatureNotification

1.3.6.1.4.1.9.9.13.3.0.3

1.3.6.1.4.1.9.9.13.1.3.1.6

= 2

A ciscoEnvMonTemperatureNotification is sent if the temperature measured at a given test point is outside the normal range for the test point (i.e. is at the warning, critical, or shutdown stage). Since such a Notification is usually generated before the shutdown state is reached, it can convey more data and has a better chance of being sent than does the ciscoEnvMonShutdownNotification.

Temperature Rising

newRoot

1.3.6.1.2.1.17.0.1

N/A

N/A

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

new root trap

stpxInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.1

1.3.6.1.4.1.9.9.82.1.3.1.1.3

=1

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

stpx port inconsistency discovered

stpxInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.1

1.3.6.1.4.1.9.9.82.1.3.1.1.4

=2

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions betweendifferent types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

stpx port inconsistency resolved

stpxLoopInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.3

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 1

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency discovered

stpxLoopInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.3

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 2

A stpxLoopInconsistencyUpdate notification is sent by abridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency resolved

stpxRootInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 1

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency discovered

stpxRootInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.0.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 2

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency resolved

vtpConfigRevNumberError

1.3.6.1.4.1.9.9.46.2.0.1

N/A

N/A

A configuration revision number error notification signifies that a device has incremented its vtpConfigRevNumberErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'. The device must throttle the generation of consecutive vtpConfigRevNumberError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients.)

vtp configuration revision number error trap

vtpConfigDigestError

1.3.6.1.4.1.9.9.46.2.0.2

N/A

N/A

A configuration digest error notification signifies that a device has incremented its vtpConfigDigestErrors counter. Generation of this notification is suppressed if the vtpNotificationsEnabled has the value 'false'. The device must throttle the generation of consecutive vtpConfigDigestError notifications so that there is at least a five-second gap between notification of this type. When notification are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients).

vtp configuration digest error trap

ciscoEnvMonShutdownNotification

1.3.6.1.4.1.9.9.13.3.0.1

N/A

N/A

A ciscoEnvMonShutdownNotification is sent if the environmental monitor detects a test point reaching a critical state and is about to initiate a shutdown. This notification contains no objects so that it may be encoded and sent in the shortest amount of time possible. Even so, management applications should not rely on receiving such a notification as it may not be sent before the shutdown completes.

cisco EnvMon Shutdown Notification Trap

caemTemperatureNotification

1.3.6.1.4.1.9.9.61.2.0.1

N/A

N/A

A caemTemperatureNotification is sent if the over temperature condition is detected in the managed system. This is a replacement for the ciscoEnvMonTemperatureNotification trap because the information 'ciscoEnvMonTemperatureStatusValue' required by the trap is not available in the managed system.

caem Temperature Notification Trap

caemVoltageNotification

1.3.6.1.4.1.9.9.61.2.0.2

N/A

N/A

A caemVoltageNotification is sent if the over voltage condition is detected and ciscoEnvMonVoltageState is not set to 'notPresent' in the managed system. This is a replacement for the ciscoEnvMonVoltageNotification trap because the information 'ciscoEnvMonVoltageStatusValue' required by the trap is not available in the managed system.

caem Voltage Notification Trap

cmnMacChangedNotification

1.3.6.1.4.1.9.9.215.2.0.1

N/A

N/A

This notification is generated when there is enough MAC address information to fully occupy a maximum size SNMP trap message. This notification is also generated when there is at least one MAC address changed or removed and the amount of time elapsed from the previous notification is greater than the maximum wait time denoted by cmnNotificationInterval object. If there are more MAC addresses information than can fit into one cmmHistTrapContent object, then multiple notifications will be generated.

cmn Mac Changed Notification Trap

cmnMacMoveNotification

1.3.6.1.4.1.9.9.215.2.0.2

N/A

N/A

cmnMacMoveNotification is generated when a MAC address is moved between two interfaces.

cmn Mac Move Notification Trap

vtpVersionOneDeviceDetected

1.3.6.1.4.1.9.9.46.2.0.6

N/A

N/A

A VTP version one device detected notification is generated by a device when: a) a management domain has been put into version 2 mode (as accessed by managementDomainVersionInUse). b) 15 minutes has passed since a). c) a version 1 PDU is detected on a trunk on the device that is in that management domain which has a lower revision number than the current configuration.

vtp VersionOne Device Detected trap

vtpLocalModeChanged

1.3.6.1.4.1.9.9.46.2.0.8

N/A

N/A

A vtpLocalModeChanged notification is generated by a device when the value of the object managementDomainLocalMode is changed.

vtp Local Mode Changed trap

vtpVersionInUseChanged

1.3.6.1.4.1.9.9.46.2.0.9

N/A

N/A

A vtpVersionInUseChanged notification is generated by a device when the value of the object managementDomainVersionInUse is changed.

vtp VersionInUse Changed trap

vlanTrunkPortDynamicStatusChange

1.3.6.1.4.1.9.9.46.2.0.7

1.3.6.1.4.1.9.9.46.1.6.1.1.14

= 1

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to trunking

vlanTrunkPortDynamicStatusChange

1.3.6.1.4.1.9.9.46.2.0.7

1.3.6.1.4.1.9.9.46.1.6.1.1.14

2

A vlanTrunkPortDynamicStatusChange notification is generated by a device when the value of vlanTrunkPortDynamicStatus object has been changed.

Vlan trunk port dynamic status changed to not trunking

cpsSecureMacAddrViolation

1.3.6.1.4.1.9.9.315.0.0.1

N/A

N/A

The address violation notification is generated when port security address violation is detected on a secure non trunk, access interface (that carries a single vlan) and the cpsIfViolationAction is set to 'dropNotify'.

cps Secure MacAddr Violation Trap

cpsIfVlanSecureMacAddrViolation

1.3.6.1.4.1.9.9.315.0.0.3

N/A

N/A

The address violation notification is generated when port security address violation is detected on a multi-vlan interface and the cpsIfViolationAction is set to 'dropNotify'.

cps IfVlan Secure MacAddr Violation Trap

clcVlanMacLimitNotif

1.3.6.1.4.1.9.9.313.0.1

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbVlanMacUsage) has crossed the configured limit of MAC addresses (clcVlanMaxMacLimit) either rising above or falling below it.

cisco L2 Control VlanMacLimit Notif Trap

clcVlanMacLimitHighNotif

1.3.6.1.4.1.9.9.313.0.2

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbVlanMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcVlanMacLimitHigh) either rising above or falling below it.

cisco L2 Control VlanMacLimit High Notif Trap

clcIfMacLimitLowNotif

1.3.6.1.4.1.9.9.313.0.3

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfMacUsage) has crossed the configured lower threshold limit of MAC addresses (clcIfMacLimitLow) either rising above or falling below it.

cisco L2 Control IfMacLimit Low Notif Trap

clcIfMacLimitHighNotif

1.3.6.1.4.1.9.9.313.0.4

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcIfMacLimitHigh) either rising above or falling below it.

cisco L2 Control IfMacLimit High Notif Trap

clcIfVlanMacLimitLowNotif

1.3.6.1.4.1.9.9.313.0.5

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfVlanMacUsage) has crossed the configured lower threshold limit of MAC addresses (clcIfVlanMacLimitLow) either rising above or falling below it.

cisco L2 Control IfVlanMacLimit Low Notif Trap

clcIfVlanMacLimitHighNotif

1.3.6.1.4.1.9.9.313.0.6

N/A

N/A

Notification is sent when the number of MAC addresses (the value of clcFdbIfVlanMacUsage) has crossed the configured higher threshold limit of MAC addresses (clcIfVlanMacLimitHigh) either rising above or falling below it.

cisco L2 Control IfVlanMacLimit High Notif Trap

csbSourceAlertEvent

1.3.6.1.4.1.9.9.658.0.1

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IP address). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert off trap

csbSourceAlertEvent

1.3.6.1.4.1.9.9.658.0.1

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IP address). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert on trap

csbSourceAlertEvent

1.3.6.1.4.1.9.9.658.0.1

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when after SIP/H.248 call establishment with one party, the media packets are received from some unexpected source/party (or some wrong/unexpected IP address). This is to alert that some unwanted data packets are received by the system from an undesirable IP/port.

Cisco SBC source alert informational trap

csbDynamicBlackListEvent

1.3.6.1.4.1.9.9.658.0.2

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when a source is added to or removed from the blacklist table. Dynamic blacklists put in place automatically (subject to a set of configurable constraints) by the SBC when it detects an attempt to disrupt traffic flowing through it. Dynamic blacklisting does not require management interference. Blacklist table is restricted only to SBC service. This table is not made available to NM. For more Information on Dynamic Blacklisting refer to the following link: http://lbj.cisco.com/push_targets1/ucdit/cc/td/doc/product/ioxsoft/iox34/cgcr34/sbc_c34/sbc34dos.htm or Search cisco.com using keywords 'DoS Prevention and Dynamic Blacklisting'.

Cisco SBC dynamic blacklist trap

csbAdjacencyStatus

1.3.6.1.4.1.9.9.658.0.3

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state up trap

csbAdjacencyStatus

1.3.6.1.4.1.9.9.658.0.3

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state down trap

csbAdjacencyStatus

1.3.6.1.4.1.9.9.658.0.3

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when an Adjacency is attached to (or detached from) the SBC.

Cisco SBC adjacency state informational trap

csbServiceStateEvent

1.3.6.1.4.1.9.9.658.0.4

1.3.6.1.4.1.9.9.658.1.28

= 1

This notification is generated when there is a change in the state of a service card. The changes in the service state are Active and Standby.

Cisco SBC service state up trap

csbServiceStateEvent

1.3.6.1.4.1.9.9.658.0.4

1.3.6.1.4.1.9.9.658.1.28

= 3

This notification is generated when there is a change in the state of a service card. The changes in the service state are Active and Standby.

Cisco SBC service state down trap

csbServiceStateEvent

1.3.6.1.4.1.9.9.658.0.4

1.3.6.1.4.1.9.9.658.1.28

= 2

This notification is generated when there is a change in the state of a service card.The changes in the service state are Active and Standby.

Cisco SBC service state informational trap

csbSystemCongestionAlarmEvent

1.3.6.1.4.1.9.9.658.0.5

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion cleared trap

csbSystemCongestionAlarmEvent

1.3.6.1.4.1.9.9.658.0.5

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion raised trap

csbSystemCongestionAlarmEvent

1.3.6.1.4.1.9.9.658.0.5

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when CPU/Memory congestion in SBC is raised or cleared.

Cisco SBC system congestion informational trap

csbSLAViolationRev1

1.3.6.1.4.1.9.9.658.0.10

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth, and so on This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation off trap

csbSLAViolationRev1

1.3.6.1.4.1.9.9.658.0.10

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth, and so on.This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation on trap

csbSLAViolationRev1

1.3.6.1.4.1.9.9.658.0.10

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when there is a violation of Service Level Agreement as described in the policy tables. The typical service level agreements include maximum number of calls allowed, max call rate, max bandwidth and so on This notification replaces the csbSLAViolation notification.

Cisco SBC SLA violation informational trap

csbRadiusConnectionStatus

1.3.6.1.4.1.9.9.658.0.7

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state up trap

csbRadiusConnectionStatus

1.3.6.1.4.1.9.9.658.0.7

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state down trap

csbRadiusConnectionStatus

1.3.6.1.4.1.9.9.658.0.7

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when the connection to the radius server changes (connected or disconnected).

Cisco SBC radius connection state informational trap

csbH248ControllerStatus

1.3.6.1.4.1.9.9.658.0.9

1.3.6.1.4.1.9.9.658.1.2

= 1

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state up trap

csbH248ControllerStatus

1.3.6.1.4.1.9.9.658.0.9

1.3.6.1.4.1.9.9.658.1.2

!= (1 or 7)

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state down trap

csbH248ControllerStatus

1.3.6.1.4.1.9.9.658.0.9

1.3.6.1.4.1.9.9.658.1.2

= 7

This notification is generated when in distributed deployment model, a DBE is attached or detached from the SBC.

Cisco SBC H248 controller state informational trap

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

N/A

N/A

This notification is only valid when the RttMonRttType is 'echo' or 'pathEcho'.A rttMonConnectionChangeNotification indicates that a connection to a target (not to a hop along the path to a target) has failed on establishment or been lost and when reestablished. Precisely, this has resulted in rttMonCtrlOperConnectionLostOccurred changing value.

RTT Connection Change

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

N/A

N/A

A rttMonTimeoutNotification indicates the occurrence of a timeout for a RTT operation, and it indicates the clearing of such a condition by a subsequent RTT operation. Precisely, this has resulted in rttMonCtrlOperTimeoutOccurred changing value. When the RttMonRttType is 'pathEcho', this notification will only be sent when the timeout occurs during an operation to the target and not to a hop along the path to the target. This also applies to the clearing of the timeout.

RTT Operation Timeout

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

N/A

N/A

A rttMonThresholdNotification indicates the occurrence of a threshold violation for a RTT operation, and it indicates the previous violation has subsided for a subsequent RTT operation. Precisely, this has resulted in rttMonCtrlOperOverThresholdOccurred changing value. When the RttMonRttType is 'pathEcho', this notification will only be sent when the threshold violation occurs during an operation to the target and not to a hop along the path to the target. This also applies to the subsiding of a threshold condition.

RTT Operation Threshold Violation

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

N/A

N/A

A rttMonVerifyErrorNotification indicates the occurrence of a data corruption in an RTT operation.

RTT Verify Error

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

N/A

N/A

A rttMonNotification indicates the occurrence of a threshold violation, and it indicates the previous violation has subsided for a subsequent operation.

RTT threshold violation or clearance

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

N/A

N/A

A rttMonLpdDiscoveryNotification indicates that the LSP Path Discovery to the target PE has failed, and it also indicates the clearing of such condition. Precisely this has resulted in rttMonLpdGrpStatsLPDFailOccurred changing value. When the rttMonLpdGrpStatsLPDFailOccurred is 'false', the instance value for rttMonLpdGrpStatsLPDFailCause is not valid.

RTT Lpd Discovery

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

N/A

N/A

A rttMonLpdGrpStatusNotification indicates that the LPD Group status rttMonLpdGrpStatsGroupStatus has changed indicating some connectivity change to the target PE. This has resulted in rttMonLpdGrpStatsGroupStatus changing value.

RTT Lpd Grp Status

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

10,12,15

ima-Group-FailureAlarm v2

IMA Group Remote Failure

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

14

ima-Group-FailureAlarm v2

IMA Group Remote insufficient links trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.5

1

ima-Group-ClearingAlarm v2

IMA Group Up Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

11,16

ima-Group-FailureAlarm v2

IMA Group local Failure

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

13

ima-Group-FailureAlarm v2

IMA Group local insufficient links trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

2

ima Link FailureAlarm v2

Ima Link Loss of delay Frame Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

1

ima Link FailureAlarm v2

Ima Link Loss of ima Frame Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

5,7,9

ima Link FailureAlarm v2

Ima Link Rcv Failure Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

3

ima Link FailureAlarm v2

Ima Link Remote Failure Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.5

1

ima-Link-ClearingAlarm v2

Ima Link Up Trap

imaFailureAlarm

1.3.6.1.4.1.353.5.7.1.2.0.1

1.3.6.1.4.1.353.5.7.1.1.6

4,6,8

ima Link FailureAlarm v2

Ima Link Xmt Failure Trap

Cisco-UMT-state-change-v2

1.3.6.1.4.1.9.9.483.0.2

N/A

N/A

The state of the connection between the UMTS interfaces.

Cisco UMT state Change trap

Cisco-GSM-state-change-trap-v2

1.3.6.1.4.1.9.9.483.0.1

N/A

N/A

The state of the connection between the GSM interfaces.

Cisco GSM state Change trap

Cisco-IPRAN-Backhaul-received-util-v2

1.3.6.1.4.1.9.9.483.0.3

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

1

When Rcvd. util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Acceptable Trap

Cisco-IPRAN-Backhaul-received-util-v2

1.3.6.1.4.1.9.9.483.0.3

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

2

When Rcvd. util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Warning Trap

Cisco-IPRAN-Backhaul-received-util-v2

1.3.6.1.4.1.9.9.483.0.3

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3

3

When Rcvd. util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Received Util Overloaded Trap

Cisco-IPRAN-Backhaul-sent-util-v2

1.3.6.1.4.1.9.9.483.0.4

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

1

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Acceptable Trap

Cisco-IPRAN-Backhaul-sent-util-v2

1.3.6.1.4.1.9.9.483.0.4

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

2

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Overloaded Trap

Cisco-IPRAN-Backhaul-sent-util-v2

1.3.6.1.4.1.9.9.483.0.4

1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4

3

When sent util changes from or to any of the following : acceptable, warning, overloaded.

IPRAN Backhaul Sent Util Warning Trap

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

1.3.6.1.4.1.9.9.42.1.2.9.1.5

1

IPSLA echo ConnLoss Trap v2

Connection Loss detected by ipsla icmp echo trap

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

1.3.6.1.4.1.9.9.42.1.2.9.1.5

2

IPSLA echo ConnLoss Trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

1

IPSLA IP or LSP echo Timeout trap v2

Timeout detected by ipsla icmp echo trap

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

2

IPSLA IP or LSP echo Timeout trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

1.3.6.1.4.1.9.9.42.1.2.9.1.7

1

IPSLA Threshold Notification trap v2

Threshold crossing under trap

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

1.3.6.1.4.1.9.9.42.1.2.9.1.7

2

IPSLA Threshold Notification trap v2

Threshold crossing over trap

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

1.3.6.1.4.1.9.9.42.1.2.9.1.11

1

IPSLA Threshold Notification deprecated trap v2

Data corruption in rtt operation trap

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

1.3.6.1.4.1.9.9.42.1.2.9.1.11

2

IPSLA Threshold Notification deprecated trap v2

Data corruption cleared in rtt operation trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 1

RTT MON notification

Connection Loss detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 1

RTT MON notification

Connection Loss detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 1

RTT MON notification

Timeout detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 1

RTT MON notification

Timeout detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 1

RTT MON notification

RTT threshold crossing over trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 2

RTT MON notification

RTT threshold crossing under trap

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

1.3.6.1.4.1.9.9.42.1.3.7.1.13

1

IPSLA LPD Discovery trap v2

IPSLA LSP path discovery failure trap

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

1.3.6.1.4.1.9.9.42.1.3.7.1.13

2

IPSLA LPD Discovery trap v2

IPSLA LSP path rediscovery trap

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

1.3.6.1.4.1.9.9.42.1.3.7.1.16

3,4

IPSLA LDP Group Status trap v2

IPSLA LDP group status failure trap

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

1.3.6.1.4.1.9.9.42.1.3.7.1.16

2

IPSLA LDP Group Status trap v2

IPSLA LDP group status restoration trap

cmplsFrrProtected

1.3.6.1.4.1.9.10.98.0.1

   

TE FRR trigger notification - protected trap v2

FRR Protected Trap

cmplsFrrUnProtected

1.3.6.1.4.1.9.10.98.0.2

   

TE FRR trigger notification - unprotected trap v2

FRR Unprotected Trap

cpwVcUp

1.3.6.1.4.1.9.10.106.2.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

1.3.6.1.4.1.9.10.106.2.1

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state.

Pseudo wire tunnel down

crepLinkStatus

.1.3.6.1.4.1.9.9.601.0.1

1.3.6.1.4.1.9.9.601.1.2.1.1.3

5

Cisco REP link status change trap

REP port state fully operational Trap

crepLinkStatus

.1.3.6.1.4.1.9.9.601.0.1

1.3.6.1.4.1.9.9.601.1.2.1.1.3

!=5

Cisco REP link status change trap

REP port state not operational Trap

crepPortRoleChange

.1.3.6.1.4.1.9.9.601.0.3

1.3.6.1.4.1.9.9.601.1.2.1.1.4

1

Cisco REP port role change trap

REP port role failed Trap

crepPortRoleChange

.1.3.6.1.4.1.9.9.601.0.3

1.3.6.1.4.1.9.9.601.1.2.1.1.4

!=1

Cisco REP port role change trap

REP port role clear Trap

ciscoSonetVTStatusChange

.1.3.6.1.4.1.9.9.126.0.4

1.3.6.1.2.1.10.39.3.1.1.1.2

!=1

VT Status is down

Cisco Sonet vt status changed to error

ciscoSonetVTStatusChange

.1.3.6.1.4.1.9.9.126.0.4

1.3.6.1.2.1.10.39.3.1.1.1.2

1

VT Status is down

Cisco Sonet vt status changed to clear

cEtherCfmCcMepUp

.1.3.6.1.4.1.9.9.461.0.0.1

   

mep up

CFM cc mep up trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

5

timeout

CFM cc mep down due to timeout trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

4

lastgasp

CFM cc mep down due to last gasp trap

cEtherCfmCcCrossconnect

.1.3.6.1.4.1.9.9.461.0.0.3

N/A

N/A

cross-connected service error trap

CFM cc cross-connected service error trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

8

cross-connected service error trap clear

CFM cc cross-connected service error trap clear

cEtherCfmCcLoop

.1.3.6.1.4.1.9.9.461.0.0.4

N/A

N/A

loop trap

CFM cc loop trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

7

loop trap clear

CFM cc loop trap clear

cEtherCfmCcConfigError

.1.3.6.1.4.1.9.9.461.0.0.5

N/A

N/A

config error trap

CFM cc config error trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

6

config error trap clear

CFM cc config error trap clear

cEtherCfmXCheckMissing

.1.3.6.1.4.1.9.9.461.0.0.6

N/A

N/A

mep missing trap

CFM crossconnect mep missing trap

cEtherCfmXCheckUnknown

.1.3.6.1.4.1.9.9.461.0.0.7

N/A

N/A

mep unknown trap

CFM crossconnect mep unknown trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

.1.3.6.1.4.1.9.9.461.1.1.2.1.16

9

mep unknown trap clear

CFM crossconnect mep unknown trap clear

cEtherCfmXCheckServiceUp

.1.3.6.1.4.1.9.9.461.0.0.8

N/A

N/A

mep service up trap

CFM crossconnect mep service up trap

vrrpTrapAuthFailure

1.3.6.1.2.1.68.0.2

   

vrrp trap auth failure trap

Vrrp trap auth failure trap

vrrpTrapNewMaster

1.3.6.1.2.1.68.0.1

   

vrrp trap new master trap

Vrrp trap new master trap

cdot3OamNonThresholdEvent

1.3.6.1.4.1.9.10.136.0.2

1.3.6.1.4.1.9.10.136.1.6.1.4

256

Local or remote non-threshold crossing event is detected

OAM Non-threshold crossing link fault trap

cdot3OamNonThresholdEvent

1.3.6.1.4.1.9.10.136.0.2

1.3.6.1.4.1.9.10.136.1.6.1.4

257

Local or remote non-threshold crossing event is detected

OAM Non-threshold crossing dying gasp trap

cdot3OamNonThresholdEvent

1.3.6.1.4.1.9.10.136.0.2

1.3.6.1.4.1.9.10.136.1.6.1.4

258

Local or remote non-threshold crossing event is detected

OAM Non-threshold crossing critical Link trap

cdot3OamThresholdEvent

1.3.6.1.4.1.9.10.136.0.1

1.3.6.1.4.1.9.10.136.1.6.1.4

1

Local or remote threshold crossing event is detected

OAM threshold errored Symbol trap

cdot3OamThresholdEvent

1.3.6.1.4.1.9.10.136.0.1

1.3.6.1.4.1.9.10.136.1.6.1.4

2

Local or remote threshold crossing event is detected

OAM threshold errored Frame Period trap

cdot3OamThresholdEvent

1.3.6.1.4.1.9.10.136.0.1

1.3.6.1.4.1.9.10.136.1.6.1.4

3

Local or remote threshold crossing event is detected

OAM threshold errored Frame trap

cdot3OamThresholdEvent

1.3.6.1.4.1.9.10.136.0.1

1.3.6.1.4.1.9.10.136.1.6.1.4

4

Local or remote threshold crossing event is detected

OAM threshold errored Frame Seconds trap

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

3

Cisco EnvMon Supply State Notification Trap

Power Supply - Critical

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

1

Cisco EnvMon Supply State Notification Trap

Power Supply - Normal

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

6

Cisco EnvMon Supply State Notification Trap

Power Supply - Not Functioning

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

5

Cisco EnvMon Supply State Notification Trap

Power Supply - Not Present

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

4

Cisco EnvMon Supply State Notification Trap

Power Supply - Shutdown

ciscoEnvMonSuppStatusChangeNotif

1.3.6.1.4.1.9.9.13.3.0.9

1.3.6.1.4.1.9.9.13.1.5.1.3

2

Cisco EnvMon Supply State Notification Trap

Power Supply - Warning


Cisco IOX V1 Traps

Table 42-5 lists the Cisco IOX SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-17.

Table 42-5 Cisco IOX V1 Traps  

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

cpwVcUp

6

2

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

6

1

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel down

MIB2 V1 link down

2

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the configuration of the agent. The Trap-PDU of type linkDown contains as the first element of the variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link down

MIB2 V1 link up

3

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link up

rttMonConnectionChangeNotification

6

1

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.5

1

IPSLA echo ConnLoss Trap v2

Connection Loss detected by ipsla icmp echo trap

rttMonConnectionChangeNotification

6

1

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.5

2

IPSLA echo ConnLoss Trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

1

IPSLA IP or LSP echo Timeout trap v2

Timeout detected by ipsla icmp echo trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

2

IPSLA IP or LSP echo Timeout trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.7

1

IPSLA Threshold Notification trap v2

Threshold crossing under trap

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.7

2

IPSLA Threshold Notification trap v2

Threshold crossing over trap

rttMonVerifyErrorNotification

6

4

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.11

1

IPSLA Threshold Notification deprecated trap v2

Data corruption in rtt operation trap

rttMonVerifyErrorNotification

6

4

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.9.1.11

2

IPSLA Threshold Notification deprecated trap v2

Data corruption cleared in rtt operation trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 1

RTT MON notification

Connection Loss detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 1

RTT MON notification

Connection Loss detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 1

RTT MON notification

Timeout detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 1

RTT MON notification

Timeout detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 1

RTT MON notification

RTT threshold crossing over trap

rttMonNotification

6

5

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 2

RTT MON notification

RTT threshold crossing under trap

rttMonLpdDiscoveryNotification

6

6

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.13

1

IPSLA LPD Discovery trap v2

IPSLA LSP path discovery failure trap

rttMonLpdDiscoveryNotification

6

6

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.13

2

IPSLA LPD Discovery trap v2

IPSLA LSP path rediscovery trap

rttMonLpdGrpStatusNotification

6

7

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.16

3,4

IPSLA LDP Group Status trap v2

IPSLA LDP group status failure trap

rttMonLpdGrpStatusNotification

6

7

1.3.6.1.4.1.9.9.42.2

1.3.6.1.4.1.9.9.42.1.3.7.1.16

2

IPSLA LDP Group Status trap v2

IPSLA LDP group status restoration trap

cmplsFrrProtected

6

1

1.3.6.1.4.1.9.10.98

N/A

N/A

TE FRR trigger notification v1

FRR Protected Trap

cmplsFrrUnProtected

6

2

1.3.6.1.4.1.9.10.98

N/A

N/A

TE FRR trigger notification v1

FRR Unprotected Trap

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

2

Indicates the line status of dsx1 interface

DSX1 Far end LOF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

4

Indicates the line status of dsx1 interface

DSX1 Near end sending LOF Indication

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

8

Indicates the line status of dsx1 interface

DSX1 Far end sending AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

16

Indicates the line status of dsx1 interface

DSX1 Near end sending AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

32

Indicates the line status of dsx1 interface

DSX1 Near end LOF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

64

Indicates the line status of dsx1 interface

DSX1 Near end Loss of Signal

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

128

Indicates the line status of dsx1 interface

DSX1 Near end is looped

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

256

Indicates the line status of dsx1 interface

DSX1 E1 TS16 AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

512

Indicates the line status of dsx1 interface

DSX1 Far End Sending TS16 LOMF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

1024

Indicates the line status of dsx1 interface

DSX1 Near End Sending TS16 LOMF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

2048

Indicates the line status of dsx1 interface

DSX1 Near End detects a test code

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

4096

Indicates the line status of dsx1 interface

DSX1 any line status not defined here

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

8192

Indicates the line status of dsx1 interface

DSX1 Near End in Unavailable Signal State

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

16384

Indicates the line status of dsx1 interface

DSX1 Carrier Equipment Out of Service

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

32768

Indicates the line status of dsx1 interface

DSX1 DS2 Payload AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

65536

Indicates the line status of dsx1 interface

DSX1 DS2 Performance Threshold Exceeded

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 4096 or 8192 or 16384 or 32768 or 65536 or 1)

Indicates the line status of dsx1 interface

DSX1 combination of bitmaps due to multiple failures

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

1

Indicates the line status of dsx1 interface

DSX1 No alarm present

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

2

Indicates the line status of dsx1 interface

DSX3 Receiving Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

4

Indicates the line status of dsx1 interface

DSX3 Transmitting Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

8

Indicates the line status of dsx1 interface

DSX3 Receiving AIS failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

16

Indicates the line status of dsx1 interface

DSX3 Transmitting AIS

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

32

Indicates the line status of dsx1 interface

DSX3 Receiving LOF failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

64

Indicates the line status of dsx1 interface

DSX3 Receiving LOS failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

128

Indicates the line status of dsx1 interface

DSX3 Looping the received signal

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

256

Indicates the line status of dsx1 interface

DSX3 Receiving a Test Pattern

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

512

Indicates the line status of dsx1 interface

DSX3 any line status not defined here

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

1024

Indicates the line status of dsx1 interface

DSX3 Near End in Unavailable Signal State

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

2048

Indicates the line status of dsx1 interface

DSX3 Carrier Equipment Out of Service

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 1)

Indicates the line status of dsx1 interface

DSX3 combination of bitmaps due to multiple failures

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

1

Indicates the line status of dsx1 interface

DSX3 No alarm present

entConfigChange

6

1

1.3.6.1.2.1.47.2

N/A

N/A

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Entity table configuration changed

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status invalid trap

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status inactive trap

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status active trap

ciscoSonetVTStatusChange

6

4

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.3.1.1.1.2

!=1

VT Status is down

Cisco Sonet vt status changed to error

ciscoSonetVTStatusChange

6

4

1.3.6.1.4.1.9.9.126

1.3.6.1.2.1.10.39.3.1.1.1.2

1

VT Status is down

Cisco Sonet vt status changed to clear

vrrpTrapAuthFailure

6

2

1.3.6.1.2.1.68

N/A

N/A

vrrp trap auth failure trap

Vrrp trap auth failure trap

vrrpTrapNewMaster

6

1

1.3.6.1.2.1.68

N/A

N/A

vrrp trap new master trap

Vrrp trap new master trap

ciscoBfdSessDown

6

2

1.3.6.1.4.1.9.10.137

N/A

N/A

Cisco-BFD-session-change-trap

Cisco bfd session down trap

ciscoBfdSessUp

6

1

1.3.6.1.4.1.9.10.137

N/A

N/A

Cisco-BFD-session-change-trap

Cisco bfd session up trap

cbgpBackwardTransition

6

2

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification object ID.

Cisco BGP backward transition trap

cbgpFsmStateChange

6

1

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP down trap

cbgpFsmStateChange

 

1

1.3.6.1.4.1.9.9.187

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP established trap

ccCopyCompletion

6

1

1.3.6.1.4.1.9.9.96.2.1

N/A

N/A

A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the ccCopyState is success

Config-copy request completion

cfhBundleDownedLinkNotification

6

3

1.3.6.1.4.1.9.9.257

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric bundle link notification. This notification is sent if the value of cfhBundleOperStatus is 'up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non-zero to zero.

cfh bundle link status down

cfhBundleDownedLinkNotification

6

3

1.3.6.1.4.1.9.9.257

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric bundle link notification. This notification is sent if the value of cfhBundleOperStatus is 'up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non-zero to zero.

cfh bundle link status up

cfhBundleStateNotification

6

2

1.3.6.1.4.1.9.9.257

N/A

N/A

Fabric bundle operational state change notification. This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to Down

cfhBundleStateNotification

6

2

1.3.6.1.4.1.9.9.257

N/A

N/A

Fabric bundle operational state change notification. This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to Up

cfhPlaneStateNotification

6

1

1.3.6.1.4.1.9.9.257

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric plane operational state change notification. This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status down

cfhPlaneStateNotification

6

1

1.3.6.1.4.1.9.9.257

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric plane operational state change notification. This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status up

cpwVcUp

6

2

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

6

1

1.3.6.1.4.1.9.10.106.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state.

Pseudo wire tunnel down

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity.sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - Unsupported

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - None

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - Not Known

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - UserInitiated

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - UserForced

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity.sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - ActiveUnitFailed

ciscoRFSwactNotif

6

1

1.3.6.1.4.1.9.9.176.2

N/A

N/A

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - ActiveUnitRemoved

atmIntfPvcFailuresTrap

6

1

1.3.6.1.2.1.37.1.14.2.1

N/A

N/A

A notification indicating that one or more PVPLs or PVCLs on this interface has failed since the last atmPvcFailuresTrap was sent. If this trap has not been sent for the last atmIntfPvcNotificationInterval, then it will be sent on the next increment of atmIntfPvcFailures.

Atm interface PVC failures trap


Cisco IOX V2/V3 Traps

Table 42-6 lists the Cisco IOX SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-18.

Table 42-6 Cisco IOX V2/V3 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

cbfDefineFileCompletion

1.3.6.1.4.1.9.9.81.2.0.1

N/A

N/A

A cbfDefineFileCompletion notification is sent on the following conditions :

CBF File operation state indicator

cbgpBackwardTransition

1.3.6.1.4.1.9.9.187.0.2

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification Object Identifier.

Cisco BGP backward transition trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP down trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP established trap

cbgpPrefixThresholdExceeded

1.3.6.1.4.1.9.9.187.0.3

N/A

N/A

The cbgpPrfefixMaxThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family

Cisco BGP prefix threshold exceeded

cbgpPrefixThresholdClear

1.3.6.1.4.1.9.9.187.0.4

N/A

N/A

The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of bgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, bgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification Object Identifier.

Cisco BGP prefix threshold clear

ccCopyCompletion

1.3.6.1.4.1.9.9.96.2.1.1

N/A

N/A

A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the ccCopyState is success

Config-copy request completion

cefcFanTrayStatusChange

1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

!=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status down

cefcFanTrayStatusChange

1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status up

cefcFRUInserted

1.3.6.1.4.1.9.9.117.2.0.3

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

1.3.6.1.4.1.9.9.117.2.0.4

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status down

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status up

cfhBundleDownedLinkNotification

1.3.6.1.4.1.9.9.257.0.3

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric bundle link notification. This notification is sent if the value of cfhBundleOperStatus is 'up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non zero to zero.

cfh bundle link status down

cfhBundleDownedLinkNotification

1.3.6.1.4.1.9.9.257.0.3

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric bundle link notification. This notification is sent if the value of cfhBundleOperStatus is 'up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non zero to zero.

cfh bundle link status up

cfhBundleStateNotification

1.3.6.1.4.1.9.9.257.0.2

1.3.6.1.4.1.9.9.257.1.3.3.1.4

=2

Fabric bundle operational state change notification. This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to Down

cfhBundleStateNotification

1.3.6.1.4.1.9.9.257.0.2

1.3.6.1.4.1.9.9.257.1.3.3.1.4

=1

Fabric bundle operational state change notification. This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to Up

cfhPlaneStateNotification

1.3.6.1.4.1.9.9.257.0.1

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric plane operational state change notification. This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status down

cfhPlaneStateNotification

1.3.6.1.4.1.9.9.257.0.1

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric plane operational state change notification. This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status up

ciscoConfigManEvent

1.3.6.1.4.1.9.9.43.2.0.1

N/A

N/A

Notification of a configuration management event as recorded in ccmHistoryEventTable.

Cisco Configuration management event notification

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

!= (0 or 1 or 2)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy failed

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=2

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy completion

ciscoFlashCopyCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

= (0 or 1)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy in progress

ciscoFlashDeviceChangeTrap

1.3.6.1.4.1.9.9.10.1.3.0.4

N/A

N/A

A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.

Cisco Flash device changed

ciscoFlashDeviceInsertedNotif

1.3.6.1.4.1.9.9.10.1.3.0.5

N/A

N/A

A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotif

1.3.6.1.4.1.9.9.10.1.3.0.6

N/A

N/A

A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.

Cisco Flash device removed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

!= (1 or 2)

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation failed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation completed

ciscoFlashMiscOpCompletionTrap

1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=1

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation in progress

ciscoPingCompletion

1.3.6.1.4.1.9.9.16.2.0.1

N/A

N/A

A ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated.

Cisco ping completion

ciscoSonetSectionStatusChange

1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

!=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value more than 1.

Cisco Sonet section status changed to error

ciscoSonetSectionStatusChange

1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value 1.

Cisco Sonet section status changed to clear

ciscoSonetLineStatusChange

1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

!=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value more than 1.

Cisco Sonet line status changed to error

ciscoSonetLineStatusChange

1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value 1.

Cisco Sonet line status changed to clear

ciscoSonetPathStatusChange

1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

!=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value more than 1.

Cisco Sonet path status changed to error

ciscoSonetPathStatusChange

1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value 1.

Cisco Sonet path status changed to clear

clogMessageGenerated

1.3.6.1.4.1.9.9.41.2.0.1

N/A

N/A

When a syslog message is generated by the device a clogMessageGenerated notification is sent. The sending of these notifications can be enabled/disabled via the clogNotificationsEnabled object.

Cisco syslog message generated

cPimNbrLoss

1.3.6.1.4.1.9.10.119.0.2

N/A

N/A

A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.

Cisco PIM neighbor lost

entSensorThresholdNotification

1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold

sensor value crossed threshold in entSensorThresholdTable

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

N/A

N/A

A rttMonNotification indicates the occurrence of a threshold violation, and it indicates the previous violation has subsided for a subsequent operation.

RTT threshold violation or clearance

cpwVcUp

1.3.6.1.4.1.9.10.106.2.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

1.3.6.1.4.1.9.10.106.2.1

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state.

Pseudo wire tunnel down

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

1

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - Unsupported

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

2

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - None

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

3

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - Not Known

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

4

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - UserInitiated

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

5

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - UserForced

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

6

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - ActiveUnitFailed

ciscoRFSwactNotif

1.3.6.1.4.1.9.9.176.2.0.1

1.3.6.1.4.1.9.9.176.1.1.8.0

7

A SWACT notification is sent by the newly active redundant unit whenever a switch of activity occurs. In the case where a SWACT event may be indistinguishable from a reset event, a network management station should use this notification to differentiate the activity. sysUpTime is the same sysUpTime defined in the RFC-1213 MIB.

Cisco RF Swap Status - ActiveUnitRemoved

cefcUnrecognizedFRU

1.3.6.1.4.1.9.9.117.2.0.5

N/A

N/A

The cefcUnrecognizedFRU notification indicates that a FRU was inserted whose product ID is not supported. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, the entPhysicalClass this FRU belongs to, the entPhysicalVendorType of this FRU, the entPhysicalName of the FRU, the entPhysicalModelName of the inserted FRU, and the cefcPhysicalStatus telling the reason code for sending this notification.

cefc FRU inserted with unsupported product ID

cefcPowerSupplyOutputChange

1.3.6.1.4.1.9.9.117.2.0.7

N/A

N/A

The notification indicates that the power supply's output capacity has changed.This notification is triggered whenever one instance of the power supply's cefcPSOutputModeInOperation has transitioned from 'false' to 'true'.

cefc Power supply output capacity changed

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

N/A

N/A

This notification is only valid when the RttMonRttType is 'echo' or 'pathEcho'.A rttMonConnectionChangeNotification indicates that a connection to a target (not to a hop along the path to a target) has failed on establishment or been lost and when reestablished. Precisely, this has resulted in rttMonCtrlOperConnectionLostOccurred changing value.

RTT Connection Change

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

N/A

N/A

A rttMonTimeoutNotification indicates the occurrence of a timeout for a RTT operation, and it indicates the clearing of such a condition by a subsequent RTT operation. Precisely, this has resulted in rttMonCtrlOperTimeoutOccurred changing value. When the RttMonRttType is 'path Echo', this notification will only be sent when the timeout occurs during an operation to the target and not to a hop along the path to the target. This also applies to the clearing of the timeout.

RTT Operation Timeout

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

N/A

N/A

A rttMonThresholdNotification indicates the occurrence of a threshold violation for a RTT operation, and it indicates the previous violation has subsided for a subsequent RTT operation. Precisely, this has resulted in rttMonCtrlOperOverThresholdOccurred changing value. When the RttMonRttType is 'path Echo', this notification will only be sent when the threshold violation occurs during an operation to the target and not to a hop along the path to the target. This also applies to the subsiding of a threshold condition.

RTT Operation Threshold Violation

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

N/A

N/A

A rttMonVerifyErrorNotification indicates the occurrence of a data corruption in an RTT operation.

RTT Verify Error

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

N/A

N/A

A rttMonNotification indicates the occurrence of a threshold violation, and it indicates the previous violation has subsided for a subsequent operation.

RTT threshold violation or clearance

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

N/A

N/A

A rttMonLpdDiscoveryNotification indicates that the LSP Path Discovery to the target PE has failed, and it also indicates the clearing of such condition. Precisely this has resulted in rttMonLpdGrpStatsLPDFailOccurred changing value. When the rttMonLpdGrpStatsLPDFailOccurred is 'false', the instance value for rttMonLpdGrpStatsLPDFailCause is not valid.

RTT Lpd Discovery

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

N/A

N/A

A rttMonLpdGrpStatusNotification indicates that the LPD Group status rttMonLpdGrpStatsGroupStatus has changed indicating some connectivity change to the target PE. This has resulted in rttMonLpdGrpStatsGroupStatus changing value.

RTT Lpd Grp Status

cbgpBackwardTransition

1.3.6.1.4.1.9.9.187.0.2

1.3.6.1.4.1.9.9.187.0.2

= 1

The cbgpBackwardTransition Event is generated when the IPv6 BGP FSM moves from a higher numbered state to a lower numbered state.

IPv6 BGP down trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.1

!= (1or 6)

The IPv6 BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

ipv6 BGP FSM state changed trap

cbgpFsmStateChange

1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.1

= 6

The IPv6 BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

IPv6 BGP established trap

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

1.3.6.1.4.1.9.9.42.1.2.9.1.5

1

IPSLA echo ConnLoss Trap v2

Connection Loss detected by ipsla icmp echo trap

rttMonConnectionChangeNotification

1.3.6.1.4.1.9.9.42.2.0.1

1.3.6.1.4.1.9.9.42.1.2.9.1.5

2

IPSLA echo ConnLoss Trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

1

IPSLA IP or LSP echo Timeout trap v2

Timeout detected by ipsla icmp echo trap

rttMonTimeoutNotification

1.3.6.1.4.1.9.9.42.2.0.2

1.3.6.1.4.1.9.9.42.1.2.9.1.6

2

IPSLA IP or LSP echo Timeout trap v2

Connection re-establish detected by ipsla icmp echo trap

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

1.3.6.1.4.1.9.9.42.1.2.9.1.7

1

IPSLA Threshold Notification trap v2

Threshold crossing under trap

rttMonThresholdNotification

1.3.6.1.4.1.9.9.42.2.0.3

1.3.6.1.4.1.9.9.42.1.2.9.1.7

2

IPSLA Threshold Notification trap v2

Threshold crossing over trap

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

1.3.6.1.4.1.9.9.42.1.2.9.1.11

1

IPSLA Threshold Notification deprecated trap v2

Data corruption in rtt operation trap

rttMonVerifyErrorNotification

1.3.6.1.4.1.9.9.42.2.0.4

1.3.6.1.4.1.9.9.42.1.2.9.1.11

2

IPSLA Threshold Notification deprecated trap v2

Data corruption cleared in rtt operation trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 1

RTT MON notification

Connection Loss detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 1

RTT MON notification

Connection Loss detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

8, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 1

RTT MON notification

Timeout detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 1

RTT MON notification

Timeout detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, null, 2

RTT MON notification

Connection re-establish detected by ipsla icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.2.1.33, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

7, not null, 2

RTT MON notification

Connection re-establish detected by ipsla LSP icmp echo trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 1

RTT MON notification

RTT threshold crossing over trap

rttMonNotification

1.3.6.1.4.1.9.9.42.2.0.5

1.3.6.1.4.1.9.9.42.1.2.19.1.2, 1.3.6.1.4.1.9.9.42.1.2.19.1.10

1, 2

RTT MON notification

RTT threshold crossing under trap

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

1.3.6.1.4.1.9.9.42.1.3.7.1.13

1

IPSLA LPD Discovery trap v2

IPSLA LSP path discovery failure trap

rttMonLpdDiscoveryNotification

1.3.6.1.4.1.9.9.42.2.0.6

1.3.6.1.4.1.9.9.42.1.3.7.1.13

2

IPSLA LPD Discovery trap v2

IPSLA LSP path rediscovery trap

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

1.3.6.1.4.1.9.9.42.1.3.7.1.16

3,4

IPSLA LDP Group Status trap v2

IPSLA LDP group status failure trap

rttMonLpdGrpStatusNotification

1.3.6.1.4.1.9.9.42.2.0.7

1.3.6.1.4.1.9.9.42.1.3.7.1.16

2

IPSLA LDP Group Status trap v2

IPSLA LDP group status restoration trap

cmplsFrrProtected

1.3.6.1.4.1.9.10.98.0.1

N/A

N/A

TE FRR trigger notification - protected trap v2

FRR Protected Trap

cmplsFrrUnProtected

1.3.6.1.4.1.9.10.98.0.2

N/A

N/A

TE FRR trigger notification - unprotected trap v2

FRR Unprotected Trap

cpwVcUp

1.3.6.1.4.1.9.10.106.2.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

1.3.6.1.4.1.9.10.106.2.1

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state.

Pseudo wire tunnel down

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

2

Indicates the line status of dsx1 interface

DSX1 Far end LOF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

4

Indicates the line status of dsx1 interface

DSX1 Near end sending LOF Indication

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

8

Indicates the line status of dsx1 interface

DSX1 Far end sending AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

16

Indicates the line status of dsx1 interface

DSX1 Near end sending AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

32

Indicates the line status of dsx1 interface

DSX1 Near end LOF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

64

Indicates the line status of dsx1 interface

DSX1 Near end Loss of Signal

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

128

Indicates the line status of dsx1 interface

DSX1 Near end is looped

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

256

Indicates the line status of dsx1 interface

DSX1 E1 TS16 AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

512

Indicates the line status of dsx1 interface

DSX1 Far End Sending TS16 LOMF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

1024

Indicates the line status of dsx1 interface

DSX1 Near End Sending TS16 LOMF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

2048

Indicates the line status of dsx1 interface

DSX1 Near End detects a test code

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

4096

Indicates the line status of dsx1 interface

DSX1 any line status not defined here

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

8192

Indicates the line status of dsx1 interface

DSX1 Near End in Unavailable Signal State

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

16384

Indicates the line status of dsx1 interface

DSX1 Carrier Equipment Out of Service

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

32768

Indicates the line status of dsx1 interface

DSX1 DS2 Payload AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

65536

Indicates the line status of dsx1 interface

DSX1 DS2 Performance Threshold Exceeded

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 4096 or 8192 or 16384 or 32768 or 65536 or 1)

Indicates the line status of dsx1 interface

DSX1 combination of bitmaps due to multiple failures

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

1

Indicates the line status of dsx1 interface

DSX1 No alarm present

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

2

Indicates the line status of dsx3 interface

DSX3 Receiving Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

4

Indicates the line status of dsx3 interface

DSX3 Transmitting Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

8

Indicates the line status of dsx3 interface

DSX3 Receiving AIS failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

16

Indicates the line status of dsx3 interface

DSX3 Transmitting AIS

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

32

Indicates the line status of dsx3 interface

DSX3 Receiving LOF failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

64

Indicates the line status of dsx3 interface

DSX3 Receiving LOS failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

128

Indicates the line status of dsx3 interface

DSX3 Looping the received signal

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

256

Indicates the line status of dsx3 interface

DSX3 Receiving a Test Pattern

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

512

Indicates the line status of dsx3 interface

DSX3 any line status not defined here

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

1024

Indicates the line status of dsx3 interface

DSX3 Near End in Unavailable Signal State

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

2048

Indicates the line status of dsx3 interface

DSX3 Carrier Equipment Out of Service

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 1)

Indicates the line status of dsx3 interface

DSX3 combination of bitmaps due to multiple failures

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

1

Indicates the line status of dsx3 interface

DSX3 No alarm present

entConfigChange

1.3.6.1.2.1.47.2.0.1

N/A

N/A

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Entity table configuration changed

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status invalid trap

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status inactive trap

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status active trap

ciscoSonetVTStatusChange

.1.3.6.1.4.1.9.9.126.0.4

1.3.6.1.2.1.10.39.3.1.1.1.2

!=1

VT Status is down

Cisco Sonet vt status changed to error

ciscoSonetVTStatusChange

.1.3.6.1.4.1.9.9.126.0.4

1.3.6.1.2.1.10.39.3.1.1.1.2

1

VT Status is down

Cisco Sonet vt status changed to clear

vrrpTrapAuthFailure

1.3.6.1.2.1.68.0.2

N/A

N/A

vrrp trap auth failure trap

Vrrp trap auth failure trap

vrrpTrapNewMaster

1.3.6.1.2.1.68.0.1

N/A

N/A

vrrp trap new master trap

Vrrp trap new master trap

ciscoBfdSessDown

1.3.6.1.4.1.9.10.137.0.2

N/A

N/A

Cisco-BFD-session-change-trap

Cisco bfd session down trap

ciscoBfdSessUp

1.3.6.1.4.1.9.10.137.0.1

N/A

N/A

Cisco-BFD-session-change-trap

Cisco bfd session up trap

atmIntfPvcFailuresTrap

1.3.6.1.2.1.37.1.14.2.1.0.1

N/A

N/A

A notification indicating that one or more PVPLs or PVCLs on this interface has failed since the last atmPvcFailuresTrap was sent. If this trap has not been sent for the last atmIntfPvcNotificationInterval, then it will be sent on the next increment of atmIntfPvcFailures

Atm interface PVC failures trap


Cisco MIB2  V1 Traps

Table 42-7 lists the Cisco MIB2 SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-19.

Table 42-7 Cisco MIB2 V1 Traps  

Trap Name
GenericType
SpecificType
Enterprise
OID
Subtype
Varbind OID
Subtype
Varbind Value
Description
Short Description

dummy ticket on sun servers

N/A

N/A

1.3.6.1.4.1.42

N/A

N/A

This type will handle all traps sent from SUN server (the OID is the SUN SNMP mib)

dummy ticket trap

MIB2 V1 link down

2

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. The Trap-PDU of type linkDown contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link down

MIB2 V1 link up

3

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link up

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

2

Indicates the line status of dsx1 interface

DSX1 Far end LOF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

4

Indicates the line status of dsx1 interface

DSX1 Near end sending LOF Indication

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

8

Indicates the line status of dsx1 interface

DSX1 Far end sending AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

16

Indicates the line status of dsx1 interface

DSX1 Near end sending AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

32

Indicates the line status of dsx1 interface

DSX1 Near end LOF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

64

Indicates the line status of dsx1 interface

DSX1 Near end Loss of Signal

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

128

Indicates the line status of dsx1 interface

DSX1 Near end is looped

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

256

Indicates the line status of dsx1 interface

DSX1 E1 TS16 AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

512

Indicates the line status of dsx1 interface

DSX1 Far End Sending TS16 LOMF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

1024

Indicates the line status of dsx1 interface

DSX1 Near End Sending TS16 LOMF

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

2048

Indicates the line status of dsx1 interface

DSX1 Near End detects a test code

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

4096

Indicates the line status of dsx1 interface

DSX1 any line status not defined here

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

8192

Indicates the line status of dsx1 interface

DSX1 Near End in Unavailable Signal State

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

16384

Indicates the line status of dsx1 interface

DSX1 Carrier Equipment Out of Service

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

32768

Indicates the line status of dsx1 interface

DSX1 DS2 Payload AIS

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

65536

Indicates the line status of dsx1 interface

DSX1 DS2 Performance Threshold Exceeded

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 4096 or 8192 or 16384 or 32768 or 65536 or 1)

Indicates the line status of dsx1 interface

DSX1 combination of bitmaps due to multiple failures

DSX1 V1 Line Status Change

6

1

1.3.6.1.2.1.10.18.15

1.3.6.1.2.1.10.18.6.1.10.17

1

Indicates the line status of dsx1 interface

DSX1 No alarm present

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

2

Indicates the line status of dsx1 interface

DSX3 Receiving Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

4

Indicates the line status of dsx1 interface

DSX3 Transmitting Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

8

Indicates the line status of dsx1 interface

DSX3 Receiving AIS failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

16

Indicates the line status of dsx1 interface

DSX3 Transmitting AIS

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

32

Indicates the line status of dsx1 interface

DSX3 Receiving LOF failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

64

Indicates the line status of dsx1 interface

DSX3 Receiving LOS failure state

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

128

Indicates the line status of dsx1 interface

DSX3 Looping the received signal

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

256

Indicates the line status of dsx1 interface

DSX3 Receiving a Test Pattern

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

512

Indicates the line status of dsx1 interface

DSX3 any line status not defined here

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

1024

Indicates the line status of dsx1 interface

DSX3 Near End in Unavailable Signal State

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

2048

Indicates the line status of dsx1 interface

DSX3 Carrier Equipment Out of Service

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 1)

Indicates the line status of dsx1 interface

DSX3 combination of bitmaps due to multiple failures

DSX3 V1 Line Status Change

6

1

.1.3.6.1.2.1.10.30.15

1.3.6.1.2.1.10.30.5.1.10.17

1

Indicates the line status of dsx1 interface

DSX3 No alarm present

entConfigChange

6

1

1.3.6.1.2.1.47.2

N/A

N/A

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Entity table configuration changed

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status invalid trap

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status inactive trap

Frame-Relay dlci status change trap v1

6

1

1.3.6.1.2.1.10.32

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status active trap

coldStart

0

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Cold start trap

bgpBackwardTransition

6

2

1.3.6.1.2.1.15.7

N/A

N/A

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

BGP down trap

bgpEstablished

6

1

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP established trap

authenticationFailure

6

5

1.3.6.1.6.3.1.1.5

N/A

N/A

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities may be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

SNMP authentication failure

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Up

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

OSPF virtual interface state changed to Down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state up

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state down

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF interface configuration error

ospfVirtIfConfigError

6

5

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF virtual interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF interface authentication failure

ospfVirtIfAuthFailure

6

7

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF virtual interface authentication failuree

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

OSPF bad packet received

ospfVirtIfRxBadPacket

6

9

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

OSPF bad packet received on virtual interface

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

OSPF packet retransmitted

ospfVirtIfTxRetransmit

6

11

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

OSPF packet retransmitted on virtual interface

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

OSPF LSA aged to MaxAge

mteEventSetFailure

6

5

1.3.6.1.2.1.88.2

N/A

N/A

Notification that an attempt to do a set in response to an event has failed.

mte event set failure

mteTriggerFalling

6

3

1.3.6.1.2.1.88.2

N/A

N/A

Notification that the falling threshold was met for triggers with mteTriggerType 'threshold'

Cisco mte trigger falling

mteTriggerFired

6

1

1.3.6.1.2.1.88.2

N/A

N/A

Notification that the trigger indicated by the object instances has fired, for triggers with mteTriggerType 'boolean' or 'existence'.

mte trigger fired

mteTriggerRising

6

2

1.3.6.1.2.1.88.2

N/A

N/A

Notification that the rising threshold was met for triggers with mteTriggerType 'threshold'

Cisco mte trigger rising

entConfigChange

6

1

1.3.6.1.2.1.47.2

N/A

N/A

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Entity table configuration changed

ipv6IfStateChange

6

1

1.3.6.1.2.1.55.2

1.3.6.1.2.1

.55.2.0.1

N/A

An ipv6IfStateChange notification signifies that there has been a change in the state of an ipv6 interface. This notification should be generated when the interface's operational status transitions to or from the up(1) state.

ipv6 interface state changed

mplsL3VpnNumVrfRouteMaxThreshCleared

6

6

1.3.6.1.2.1.10.166.11

N/A

N/A

This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value.

mpls l3 vpn numvrf routemax thresh cleared Trap

mplsL3VpnVrfDown

6

2

1.3.6.1.2.1.10.166.11

N/A

N/A

This notification is generated when:
a. One interface is associated with this VRF, and the ifOperStatus of this interface changes from up(1) to down(2).
b. Multiple interfaces are associated with this VRF, and the ifOperStatus of all except one of these interfaces is equal to up(1), and the ifOperStatus of that interface changes from up(1) to down(2).
c. The last interface with ifOperStatus equal to up(1) is disassociated from a VRF

mpls l3 vpn vrf Down Trap

mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

6

4

1.3.6.1.2.1.10.166.11

N/A

N/A

This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold.

mpls l3 vpn vrf numvrf routemax thresh exceeded Trap

mplsL3VpnVrfRouteMidThreshExceeded

6

3

1.3.6.1.2.1.10.166.11

N/A

N/A

This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold.

mpls l3 vpn vrf routemid thresh exceeded Trap

mplsL3VpnVrfUp

6

1

1.3.6.1.2.1.10.166.11

N/A

N/A

This notification is generated when:

a. No interface is associated with this VRF, and the first (and only first) interface associated with it has its ifOperStatus change to up(1).

b. One interface is associated with this VRF, and the ifOperStatus of this interface changes to up(1).

c. Multiple interfaces are associated with this VRF, and the ifOperStatus of all interfaces is down(2), and the first of those interfaces has its ifOperStatus change to up(1).

mpls l3 vpn vrf Up Trap

mplsLdpInitSessionThresholdExceeded

6

1

1.3.6.1.2.1.10.166.4

N/A

N/A

Generated when the value of the 'mplsLdpEntityInitSessionThreshold' object is not zero, and the number of Session Initialization messages exceeds the value of the 'mplsLdpEntityInitSessionThreshold' object

MPLS LDP init session threshold exceeded Trap

mplsLdpSessionDown

6

4

1.3.6.1.2.1.10.166.4

N/A

N/A

Sent when the value of 'mplsLdpSessionState' leaves the 'operational(5)' state

MPLS LDP session down Trap

mplsLdpSessionUp

6

3

1.3.6.1.2.1.10.166.4

N/A

N/A

Sent when the value of 'mplsLdpSessionState' enters the 'operational(5)' state

MPLS LDP session up Trap

mplsTunnelRerouted

6

3

1.3.6.1.2.1.10.166.3

N/A

N/A

Generated when a tunnel is rerouted. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS-TE tunnel rerouted trap

mplsTunnelReoptimized

6

4

1.3.6.1.2.1.10.166.3

N/A

N/A

Generated when a tunnel is reoptimized. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS-TE tunnel reoptimized trap

mplsTunnelDown

6

2

1.3.6.1.2.1.10.166.3

N/A

N/A

Generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresen state). This other state is indicated by the included value of mplsTunnelOperStatus

MPLS-TE tunnel down

mplsTunnelUp

6

1

1.3.6.1.2.1.10.166.3

N/A

N/A

Generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus

MPLS-TE tunnel up


Cisco MIB2  V2/V3 Traps

Table 42-8 lists the Cisco MIB2 SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 42-20.

Table 42-8 Cisco MIB2 V2/V3 Traps  

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

N/A

N/A

The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.

BGP down trap

bgpEstablished

1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP established trap

mteEventSetFailure

1.3.6.1.2.1.88.2.0.5

N/A

N/A

Notification that an attempt to do a set in response to an event has failed.

mte event set failure

mteTriggerFalling

1.3.6.1.2.1.88.2.0.3

N/A

N/A

Notification that the falling threshold was met for triggers with mteTriggerType 'threshold

Cisco mte trigger falling

mteTriggerFired

1.3.6.1.2.1.88.2.0.1

N/A

N/A

Notification that the trigger indicated by the object instances has fired, for triggers with mteTriggerType 'boolean' or 'existence'.

mte trigger fired

mteTriggerRising

1.3.6.1.2.1.88.2.0.2

N/A

N/A

Notification that the rising threshold was met for triggers with mteTriggerType 'threshold

Cisco mte trigger rising

entConfigChange

1.3.6.1.2.1.47.2.0.1

N/A

N/A

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.

Entity table configuration changed

coldStart

1.3.6.1.6.3.1.1.5.1

N/A

N/A

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Cold start trap

warmStart

1.3.6.1.6.3.1.1.5.2

N/A

N/A

A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configurationis unaltered

Warm start trap

authenticationFailure

1.3.6.1.6.3.1.1.5.5

N/A

N/A

An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.

SNMP authentication failure

linkDown

1.3.6.1.6.3.1.1.5.3

N/A

N/A

A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.

SNMP Link down

linkUp

1.3.6.1.6.3.1.1.5.4

N/A

N/A

A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.

SNMP Link up

ipv6IfStateChange

1.3.6.1.2.1.55.2.0.1

N/A

N/A

An ipv6IfStateChange notification signifies that there has been a change in the state of an ipv6 interface. This notification should be generated when the interface's operational status transitions to or from the up(1) state.

ipv6 interface state changed

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).

OSPF interface state changed to Down

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).

OSPF interface state changed to Up

ospfVirtIfStateChange

1.3.6.1.2.1.14.16.2.1

N/A

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

OSPF virtual interface state changed to Down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state up

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state down

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state up

ospfIfConfigError

1.3.6.1.2.1.14.16.2.4

N/A

N/A

An ospfIfConfigError trap signifies that a packet has been received on a non virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF interface configuration error

ospfVirtIfConfigError

1.3.6.1.2.1.14.16.2.5

N/A

N/A

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF virtual interface configuration error

ospfIfAuthFailure

1.3.6.1.2.1.14.16.2.6

N/A

N/A

An ospfIfAuthFailure trap signifies that a packet has been received on a non virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF interface authentication failure

ospfVirtIfAuthFailure

1.3.6.1.2.1.14.16.2.7

N/A

N/A

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF virtual interface authentication failure

ospfIfRxBadPacket

1.3.6.1.2.1.14.16.2.8

N/A

N/A

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non virtual interface that cannot be parsed.

OSPF bad packet received

ospfVirtIfRxBadPacket

1.3.6.1.2.1.14.16.2.9

N/A

N/A

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

OSPF bad packet received on virtual interface

ospfTxRetransmit

1.3.6.1.2.1.14.16.2.10

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non virtual interface.

OSPF packet retransmitted

ospfVirtIfTxRetransmit

1.3.6.1.2.1.14.16.2.11

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

OSPF packet retransmitted on virtual interface

ospfOriginateLsa

1.3.6.1.2.1.14.16.2.12

N/A

N/A

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

OSPF new LSA originated

ospfMaxAgeLsa

1.3.6.1.2.1.14.16.2.13

N/A

N/A

An ospfMaxAgeLsa trap signifies that one of the LSA in the link-state database of the router has aged to MaxAge.

OSPF LSA aged to MaxAge

mplsL3VpnNumVrfRouteMaxThreshCleared

1.3.6.1.2.1.10.166.11.0.6

N/A

N/A

This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value.

mpls l3 vpn numvrf routemax thresh cleared Trap

mplsL3VpnVrfDown

1.3.6.1.2.1.10.166.11.0.2

N/A

N/A

This notification is generated when: a. One interface is associated with this VRF, and the ifOperStatus of this interface changes from up(1) to down(2). b. Multiple interfaces are associated with this VRF, and the ifOperStatus of all except one of these interfaces is equal to up(1), and the ifOperStatus of that interface changes from up(1) to down(2).c. The last interface with ifOperStatus equal to up(1) is disassociated from a VRF

mpls l3 vpn vrf Down Trap

mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

1.3.6.1.2.1.10.166.11.0.4

N/A

N/A

This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold.

mpls l3 vpn vrf numvrf routemax thresh exceeded Trap

mplsL3VpnVrfRouteMidThreshExceeded

1.3.6.1.2.1.10.166.11.0.3

N/A

N/A

This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold.

mpls l3 vpn vrf routemid thresh exceeded Trap

mplsL3VpnVrfUp

1.3.6.1.2.1.10.166.11.0.1

N/A

N/A

This notification is generated when: a. No interface is associated with this VRF, and the first (and only first) interface associated with it has its ifOperStatus change to up(1).

b. One interface is associated with this VRF, and the ifOperStatus of this interface changes to up(1).

c. Multiple interfaces are associated with this VRF, and the ifOperStatus of all interfaces is down(2), and the first of those interfaces has its ifOperStatus change to up(1).

mpls l3 vpn vrf Up Trap

mplsLdpInitSessionThresholdExceeded

1.3.6.1.2.1.10.166.4.0.1

N/A

N/A

generated when the value of the 'mplsLdpEntityInitSessionThreshold' object is not zero, and the number of Session Initialization messages exceeds the value of the 'mplsLdpEntityInitSessionThreshold' object

MPLS LDP init session threshold exceeded Trap

mplsLdpSessionDown

1.3.6.1.2.1.10.166.4.0.4

N/A

N/A

sent when the value of 'mplsLdpSessionState' leaves the 'operational(5)' state

MPLS LDP session down Trap

mplsLdpSessionUp

1.3.6.1.2.1.10.166.4.0.3

N/A

N/A

sent when the value of 'mplsLdpSessionState' enters the 'operational(5)' state

MPLS LDP session up Trap

mplsTunnelRerouted

1.3.6.1.2.1.10.166.3.0.3

N/A

N/A

generated when a tunnel is rerouted. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS TE tunnel rerouted trap

mplsTunnelReoptimized

1.3.6.1.2.1.10.166.3.0.4

N/A

N/A

generated when a tunnel is reoptimized. If the mplsTunnelARHopTable is used, then this tunnel instance's entry in the mplsTunnelARHopTable MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS TE tunnel reoptimized trap

mplsTunnelDown

1.3.6.1.2.1.10.166.3.0.2

N/A

N/A

generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresen state). This other state is indicated by the included value of mplsTunnelOperStatus

MPLS TE tunnel down

mplsTunnelUp

1.3.6.1.2.1.10.166.3.0.1

N/A

N/A

generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus

MPLS TE tunnel up

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

2

Indicates the line status of dsx1 interface

DSX1 Far end LOF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

4

Indicates the line status of dsx1 interface

DSX1 Near end sending LOF Indication

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

8

Indicates the line status of dsx1 interface

DSX1 Far end sending AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

16

Indicates the line status of dsx1 interface

DSX1 Near end sending AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

32

Indicates the line status of dsx1 interface

DSX1 Near end LOF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

64

Indicates the line status of dsx1 interface

DSX1 Near end Loss of Signal

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

128

Indicates the line status of dsx1 interface

DSX1 Near end is looped

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

256

Indicates the line status of dsx1 interface

DSX1 E1 TS16 AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

512

Indicates the line status of dsx1 interface

DSX1 Far End Sending TS16 LOMF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

1024

Indicates the line status of dsx1 interface

DSX1 Near End Sending TS16 LOMF

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

2048

Indicates the line status of dsx1 interface

DSX1 Near End detects a test code

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

4096

Indicates the line status of dsx1 interface

DSX1 any line status not defined here

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

8192

Indicates the line status of dsx1 interface

DSX1 Near End in Unavailable Signal State

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

16384

Indicates the line status of dsx1 interface

DSX1 Carrier Equipment Out of Service

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

32768

Indicates the line status of dsx1 interface

DSX1 DS2 Payload AIS

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

65536

Indicates the line status of dsx1 interface

DSX1 DS2 Performance Threshold Exceeded

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 4096 or 8192 or 16384 or 32768 or 65536 or 1)

Indicates the line status of dsx1 interface

DSX1 combination of bitmaps due to multiple failures

DSX1 V1 Line Status Change

1.3.6.1.2.1.10.18.15.0.1

1.3.6.1.2.1.10.18.6.1.10.17

1

Indicates the line status of dsx1 interface

DSX1 No alarm present

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

2

Indicates the line status of dsx3 interface

DSX3 Receiving Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

4

Indicates the line status of dsx3 interface

DSX3 Transmitting Yellow/Remote Alarm Indication

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

8

Indicates the line status of dsx3 interface

DSX3 Receiving AIS failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

16

Indicates the line status of dsx3 interface

DSX3 Transmitting AIS

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

32

Indicates the line status of dsx3 interface

DSX3 Receiving LOF failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

64

Indicates the line status of dsx3 interface

DSX3 Receiving LOS failure state

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

128

Indicates the line status of dsx3 interface

DSX3 Looping the received signal

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

256

Indicates the line status of dsx3 interface

DSX3 Receiving a Test Pattern

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

512

Indicates the line status of dsx3 interface

DSX3 any line status not defined here

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

1024

Indicates the line status of dsx3 interface

DSX3 Near End in Unavailable Signal State

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

2048

Indicates the line status of dsx3 interface

DSX3 Carrier Equipment Out of Service

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

!=(2 or 4 or 8 or 16 or 32 or 64 or 128 or 256 or 512 or 1024 or 2048 or 1)

Indicates the line status of dsx3 interface

DSX3 combination of bitmaps due to multiple failures

DSX3 V1 Line Status Change

1.3.6.1.2.1.10.30.15.0.1

1.3.6.1.2.1.10.30.5.1.10.17

1

Indicates the line status of dsx3 interface

DSX3 No alarm present

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status invalid trap

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

3

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status inactive trap

Frame-Relay dlci status change trap v1

1.3.6.1.2.1.10.32.0.1

1.3.6.1.2.1.10.32.2.1.3

2

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

FR DLCI status active trap


Cisco ACE V1 Traps

Table 42-9 lists the Cisco ACE SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or Table 42-21.

Table 42-9 CIsco ACE V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

cesRealServerStateUp

6

1

1.3.6.1.4.1.9.9.470

N/A

N/A

ces real server state up trap

ces real server state up trap

cesRealServerStateDown

6

2

1.3.6.1.4.1.9.9.470

N/A

N/A

ces real server state down trap

ces real server state down trap

cesRealServerStateChange

6

3

1.3.6.1.4.1.9.9.470

N/A

N/A

ces real server state change trap

ces real server state change trap

cesRserverStateUp

6

4

1.3.6.1.4.1.9.9.470

N/A

N/A

ces R server state up trap

ces R server state up trap

cesRserverStateDown

6

5

1.3.6.1.4.1.9.9.470

N/A

N/A

ces R server state down trap

ces R server state down trap

cesRserverStateChange

6

6

1.3.6.1.4.1.9.9.470

N/A

N/A

ces R server state change trap

ces R server state change trap

ciscoSlbVServerVIPStateChange

6

6

1.3.6.1.4.1.9.9.161.2

N/A

N/A

Cisco sib V server VIP state change trap

cisco sib V server VIP state change trap

ciscoSlbVServerStateChange

6

5

1.3.6.1.4.1.9.9.161.2

N/A

N/A

Cisco sib V server state change trap

cisco sib V server state change trap

clmLicenseExpiryNotify

6

1

1.3.6.1.4.1.9.9.369.3

N/A

N/A

clm license expiry notify trap

clm license expiry notify trap

clmLicenseFileMissingNotify

6

3

1.3.6.1.4.1.9.9.369.3

N/A

N/A

clm license file missing notify trap

clm license file missing notify trap

clmLicenseExpiryWarningNotify

6

4

1.3.6.1.4.1.9.9.369.3

N/A

N/A

clm license expiry warning notify trap

clm license expiry warning notify trap


Cisco ACE  V2/V3 Traps

Table 42-10 lists the Cisco ACE SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link in the Short Description column or see Table 42-22.

Table 42-10 Cisco ACE V2/V3 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

linkDown

1.3.6.1.6.3.1.1.5.3

N/A

N/A

SNMP Link down

SNMP Link down

linkUp

1.3.6.1.6.3.1.1.5.4

N/A

N/A

SNMP Link up

SNMP Link up

cesRealServerStateUp

1.3.6.1.4.1.9.9.470.0.1

N/A

N/A

ces real server state up trap

ces real server state up trap

cesRealServerStateDown

1.3.6.1.4.1.9.9.470.0.2

N/A

N/A

ces real server state down trap

ces real server state down trap

cesRealServerStateChange

1.3.6.1.4.1.9.9.470.0.3

N/A

N/A

ces real server state change trap

ces real server state change trap

cesRserverStateUp

1.3.6.1.4.1.9.9.470.0.4

N/A

N/A

ces R server state up trap

ces R server state up trap

cesRserverStateDown

1.3.6.1.4.1.9.9.470.0.5

N/A

N/A

ces R server state down trap

ces R server state down trap

cesRserverStateChange

1.3.6.1.4.1.9.9.470.0.6

N/A

N/A

ces R server state change trap

ces R server state change trap

ciscoSlbVServerVIPStateChange

1.3.6.1.4.1.9.9.161.2.0.6

N/A

N/A

Cisco sib V server VIP state change trap

cisco sib V server VIP state change trap

ciscoSlbVServerStateChange

1.3.6.1.4.1.9.9.161.2.0.5

N/A

N/A

Cisco sib V server state change trap

cisco sib V server state change trap

clmLicenseExpiryNotify

1.3.6.1.4.1.9.9.369.3.0.1

N/A

N/A

clm license expiry notify trap

clm license expiry notify trap

clmLicenseFileMissingNotify

1.3.6.1.4.1.9.9.369.3.0.3

N/A

N/A

clm license file missing notify trap

clm license file missing notify trap

clmLicenseExpiryWarningNotify

1.3.6.1.4.1.9.9.369.3.0.4

N/A

N/A

clm license expiry warning notify trap

clm license expiry warning notify trap


Cisco Nexus V1 Traps

Table 42-11 lists the Cisco NEXUS SNMP V1 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or Table 42-23.

Table 42-11 Cisco Nexus V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

bgpEstablished

6

1

1.3.6.1.2.1.15.7

1.3.6.1.2.1.15.3.1.2

= 6

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP established trap

bgpBackwardTransition

6

2

1.3.6.1.2.1.15.7

N/A

N/A

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP down trap

newRoot

6

1

1.3.6.1.2.1.17

N/A

N/A

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root,e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

new root trap

topologyChange

6

2

1.3.6.1.2.1.17

N/A

N/A

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

Spanning Tree Topology Changed

cefcModuleStatusChange

6

1

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

6

1

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

6

2

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status down

cefcPowerStatusChange

6

2

1.3.6.1.4.1.9.9.117.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status up

cefcFRUInserted

6

3

1.3.6.1.4.1.9.9.117.2

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

6

4

1.3.6.1.4.1.9.9.117.2

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

entSensorThresholdNotification

6

1

1.3.6.1.4.1.9.9.91.2.0

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold

sensor value crossed threshold in entSensorThresholdTable

cpsIfVlanSecureMacAddrViolation

6

3

1.3.6.1.4.1.9.9.315

N/A

N/A

The address violation notification is generated when port security address violation is detected on a multi-vlan interface and the cpsIfViolationAction is set to 'dropNotify'.

cps IfVlan Secure MacAddr Violation Trap

cpsSecureMacAddrViolation

6

1

1.3.6.1.4.1.9.9.315

N/A

N/A

The address violation notification is generated when port security address violation is detected on a secure non-trunk, access interface (that carries a single vlan) and the cpsIfViolationAction is set to 'dropNotify'.

cps Secure MacAddr Violation Trap

stpxInconsistencyUpdate

6

1

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.3.1.1.3

=1

A stpxPortInconsistencyUpdate notification is sent by abridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

Stpx Pvid Inconsistency Trap

stpxInconsistencyUpdate

6

1

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.3.1.1.3

=0

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency.The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

Stpx Type Inconsistency Trap

stpxLoopInconsistencyUpdate

6

3

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 1

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency discovered

stpxLoopInconsistencyUpdate

6

3

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.8.2.1.3

= 2

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicateswhich Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency resolved

stpxRootInconsistencyUpdate

6

2

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 1

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency discovered

stpxRootInconsistencyUpdate

6

2

1.3.6.1.4.1.9.9.82.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

= 2

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency resolved

linkDown

2

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. The Trap-PDU of type linkDown contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link down

linkUp

3

0

1.3.6.1.6.3.1.1.5

N/A

N/A

A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link up

risingAlarm

6

1

1.3.6.1.2.1.16

N/A

N/A

RMON Rising Alarm

RMON Rising Alarm

fallingAlarm

6

2

1.3.6.1.2.1.16

N/A

N/A

RMON Falling Alarm

RMON Falling Alarm

coldStart

6

1

1.3.6.1.6.3.1.1.5

N/A

N/A

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Cold start trap

ospfVirtIfStateChange

6

1

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

OSPF virtual interface state changed to Down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

!= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state down

ospfNbrStateChange

6

2

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.10.1.6

= 8

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state up

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

!= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state down

ospfVirtNbrStateChange

6

3

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.11.1.5

= 8

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state up

ospfIfConfigError

6

4

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF interface configuration error

ospfVirtIfConfigError

6

5

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF virtual interface configuration error

ospfIfAuthFailure

6

6

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF interface authentication failure

ospfVirtIfAuthFailure

6

7

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF virtual interface authentication failure

ospfIfRxBadPacket

6

8

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

OSPF bad packet received

ospfVirtIfRxBadPacket

6

9

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

OSPF bad packet received on virtual interface

ospfTxRetransmit

6

10

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

OSPF packet retransmitted

ospfVirtIfTxRetransmit

6

11

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

OSPF packet retransmitted on virtual interface

ospfOriginateLsa

6

12

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

OSPF new LSA originated

ospfMaxAgeLsa

6

13

1.3.6.1.2.1.14.16.2

N/A

N/A

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

OSPF LSA aged to MaxAge

ospfLsdbOverflow

6

14

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF lsdb overflow trap

OSPF lsdb overflow trap

ospfLsdbApproachingOverflow

6

15

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF lsdb approaching overflow trap

OSPF lsdb approaching overflow trap

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Down

ospfIfStateChange

6

16

1.3.6.1.2.1.14.16.2

1.3.6.1.2.1.14.7.1.12

!= 1

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Up

ospfNssaTranslatorStatusChange

6

17

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF NSSA translator status change trap

OSPF NSSA translator status change trap

ospfRestartStatusChange

6

18

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF restart status change trap

OSPF restart status change trap

ospfNbrRestartHelperStatusChange

6

19

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF neighbor restart helper status change trap

OSPF neighbor restart helper status change trap

ospfVirtNbrRestartHelperStatusChange

6

20

1.3.6.1.2.1.14.16.2

N/A

N/A

OSPF virtual neighbor restart helper status change trap

OSPF virtual neighbor restart helper status change trap


Cisco Nexus V2/V3 Traps

Table 42-12 lists the Cisco Nexus SNMP V2/V3 traps supported in Cisco ANA. For associated event types, event subtypes, and Cisco ANA registry parameters, use the link in the Short Description column or see Table 42-24.

Table 42-12 Cisco Nexus V2/V3 Traps 

Trap Name
Trap OID
Subtype Varbind OID
Subtype Varbind Value
Description
Short Description

bgpEstablished

1.3.6.1.2.1.15.7.1

1.3.6.1.2.1.15.3.1.2

N/A

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP established trap

bgpBackwardTransition

1.3.6.1.2.1.15.7.2

N/A

N/A

The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.

BGP down trap

newRoot

1.3.6.1.2.1.17.1

N/A

N/A

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.

new root trap

topologyChange

1.3.6.1.2.1.17.2

N/A

N/A

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

Spanning Tree Topology Changed

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

N/A

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

1.3.6.1.4.1.9.9.117.2.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

N/A

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

N/A

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status down

cefcPowerStatusChange

1.3.6.1.4.1.9.9.117.2.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

N/A

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc power status up

cefcFRUInserted

1.3.6.1.4.1.9.9.117.2.3

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

1.3.6.1.4.1.9.9.117.2.4

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

entSensorThresholdNotification

1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold.

sensor value crossed threshold in entSensorThresholdTable

cpsIfVlanSecureMacAddrViolation

1.3.6.1.4.1.9.9.315.3

N/A

N/A

The address violation notification is generated when port security address violation is detected on a multi-vlan interface and the cpsIfViolationAction is set to 'dropNotify'.

cps IfVlan Secure MacAddr Violation Trap

cpsSecureMacAddrViolation

1.3.6.1.4.1.9.9.315.1

N/A

N/A

The address violation notification is generated when port security address violation is detected on a secure non-trunk, access interface (that carries a single vlan) and the cpsIfViolationAction is set to 'dropNotify'.

cps Secure MacAddr Violation Trap

stpxInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.1

1.3.6.1.4.1.9.9.82.1.3.1.1.3

N/A

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

Stpx Pvid Inconsistency Trap

stpxInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.1

1.3.6.1.4.1.9.9.82.1.3.1.1.3

N/A

A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.

Stpx Type Inconsistency Trap

stpxLoopInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.3

1.3.6.1.4.1.9.9.82.1.8.2.1.3

N/A

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyStateis created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency discovered

stpxLoopInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.3

1.3.6.1.4.1.9.9.82.1.8.2.1.3

N/A

A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such a loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.

stpx loop inconsistency resolved

stpxRootInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

N/A

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification istrue(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency discovered

stpxRootInconsistencyUpdate

1.3.6.1.4.1.9.9.82.2.2

1.3.6.1.4.1.9.9.82.1.5.2.1.3

N/A

A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2).The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.

stpx root inconsistency resolved

linkDown

1.3.6.1.6.3.1.1.5.3

N/A

N/A

A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. The Trap-PDU of type linkDown contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link down

linkUp

1.3.6.1.6.3.1.1.5.4

N/A

N/A

A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. The Trap-PDU of type linkUp contains as the first element of its variable-bindings, the name and value of the ifIndex instance for the affected interface.

SNMP Link up

risingAlarm

1.3.6.1.2.1.16.0.1

N/A

N/A

RMON Rising Alarm

RMON Rising Alarm

fallingAlarm

1.3.6.1.2.1.16.0.2

N/A

N/A

RMON Falling Alarm

RMON Falling Alarm

coldStart

1.3.6.1.6.3.1.1.5.1

N/A

N/A

A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.

Cold start trap

ospfVirtIfStateChange

1.3.6.1.2.1.14.16.2.1

N/A

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).

OSPF virtual interface state changed to Down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

N/A

N/A

OSPF neighbor state down

ospfNbrStateChange

1.3.6.1.2.1.14.16.2.2

1.3.6.1.2.1.14.10.1.6

N/A

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full).

OSPF neighbor state up

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state down

ospfVirtNbrStateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1.2.1.14.11.1.5

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).

OSPF virtual neighbor state up

ospfIfConfigError

1.3.6.1.2.1.14.16.2.4

N/A

N/A

An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF interface configuration error

ospfVirtIfConfigError

1.3.6.1.2.1.14.16.2.5

N/A

N/A

An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.

OSPF virtual interface configuration error

ospfIfAuthFailure

1.3.6.1.2.1.14.16.2.6

N/A

N/A

An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF interface authentication failure

ospfVirtIfAuthFailure

1.3.6.1.2.1.14.16.2.7

N/A

N/A

An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.

OSPF virtual interface authentication failure

ospfIfRxBadPacket

1.3.6.1.2.1.14.16.2.8

N/A

N/A

An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.

OSPF bad packet received

ospfVirtIfRxBadPacket

1.3.6.1.2.1.14.16.2.9

N/A

N/A

An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.

OSPF bad packet received on virtual interface

ospfTxRetransmit

1.3.6.1.2.1.14.16.2.10

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface.

OSPF packet retransmitted

ospfVirtIfTxRetransmit

1.3.6.1.2.1.14.16.2.11

N/A

N/A

An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface.

OSPF packet retransmitted on virtual interface

ospfOriginateLsa

1.3.6.1.2.1.14.16.2.12

N/A

N/A

An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.

OSPF new LSA originated

ospfMaxAgeLsa

1.3.6.1.2.1.14.16.2.13

N/A

N/A

An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.

OSPF LSA aged to MaxAge

ospfLsdbOverflow

1.3.6.1.2.1.14.16.2.14

N/A

N/A

OSPF lsdb overflow trap

OSPF lsdb overflow trap

ospfLsdbApproachingOverflow

1.3.6.1.2.1.14.16.2.15

N/A

N/A

OSPF lsdb approaching overflow trap

OSPF lsdb approaching overflow trap

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Down

ospfIfStateChange

1.3.6.1.2.1.14.16.2.16

1.3.6.1.2.1.14.7.1.12

N/A

An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtualOSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)

OSPF interface state changed to Up

ospfNssaTranslatorStatusChange

1.3.6.1.2.1.14.16.2.17

N/A

N/A

OSPF NSSA translator status change trap

OSPF NSSA translator status change trap

ospfRestartStatusChange

1.3.6.1.2.1.14.16.2.18

N/A

N/A

OSPF restart status change trap

OSPF restart status change trap

ospfNbrRestartHelperStatusChange

1.3.6.1.2.1.14.16.2.19

N/A

N/A

OSPF neighbor restart helper status change trap

OSPF neighbor restart helper status change trap

ospfVirtNbrRestartHelperStatusChange

1.3.6.1.2.1.14.16.2.20

N/A

N/A

OSPF virtual neighbor restart helper status change trap

OSPF virtual neighbor restart helper status change trap


Cisco ASR 9000 V1 Trap Registry Parameters

Table 42-13 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the ASR 9000 SNMP V1 traps shown in Table 42-1.

Table 42-13 Cisco ASR 9000 V1 Trap Registry Parameters 

Short
Description
Event Type
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto Remove
Flapping

dot1ag CFM Fault Alarm

dot1ag cfm fault alarm trap

dot1ag cfm fault alarm trap

N

ICFMService

F

F

F

0

F

info

T

T

F

dot1ag CFM Fault Alarm

dot1ag cfm fault alarm trap

dot1ag cfm fault alarm restore trap

N

ICFMService

F

F

F

0

F

clr

F

T

F


Cisco ASR 9000 V2/V3 Registry Parameters

Table 42-14 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the Cisco ASR 9000 SNMP V2/V3 traps shown in Table 42-2.

Table 42-14 Cisco ASR 9000 V2/V3 Trap Registry Parameters  

Short
Description
Event Type
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto Remove
Flapping

NTP Server Status Changes to Unknown

cisco ntp server notification

unknown

N

IManagedElement

F

F

F

0

F

info

F

T

F

NTP Server Status Changes to notRunning

cisco ntp server notification

notRunning

N

IManagedElement

F

F

F

0

F

info

F

T

F

NTP Server Status Changes to notSynchronized

cisco ntp server notification

notSynchronized

N

IManagedElement

F

F

F

0

F

info

F

T

F

NTP Server Status Changes to syncToLocal

cisco ntp server notification

syncToLocal

N

IManagedElement

F

F

F

0

F

info

F

T

F

NTP Server Status Changes to syncToRefclock

cisco ntp server notification

syncToRefclock

N

IManagedElement

F

F

F

0

F

info

F

T

F

NTP Server Status Changes to syncToRemoteServer

cisco ntp server notification

syncToRemoteServer

N

IManagedElement

F

F

F

0

F

info

F

T

F

Spanning Tree Topology Changed

Spanning-Tree-Topology-Change-Trap

Spanning-Tree-Topology-Change

N

IManagedElement

F

F

F

0

F

info

F

T

F

Warm start trap

warm start trap

warm start trap

N

IManagedElement

F

F

F

0

F

min

T

T

F

dot1ag CFM Fault Alarm

dot1ag cfm fault alarm trap

dot1ag cfm fault alarm trap

N

ICFMService

F

F

F

0

F

info

T

T

F

dot1ag CFM Fault Alarm

dot1ag cfm fault alarm trap

dot1ag cfm fault alarm restore trap

N

ICFMService

F

F

F

0

F

clr

F

T

F


Cisco IOS V1 Trap Registry Parameters

Table 42-15 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the Cisco IOS SNMP V1 traps shown in Table 42-3.

Table 42-15 Cisco IOS V1 Trap Registry Parameters  

Short
Description
Event Type
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto Remove
Flapping

Critical Temprature

cisco-Environment-Monitoring-Temperature-Notification

critical

N

IManagedElement

F

F

F

0

T

cri

F

T

F

Normal Temprature

cisco-Environment-Monitoring-Temperature-Notification

normal

N

IManagedElement

F

F

F

0

F

clr

F

T

F

Not Functioning

cisco-Environment-Monitoring-Temperature-Notification

notFunctioning

N

IManagedElement

F

F

F

0

T

maj

F

T

F

Not Present

cisco-Environment-Monitoring-Temperature-Notification

notPresent

N

IManagedElement

F

F

F

0

T

maj

F

T

F

Critical Temprature - Device Shutdown

cisco-Environment-Monitoring-Temperature-Notification

shutdown

N

IManagedElement

F

F

F

0

T

cri

F

T

F

Temprature Rising

cisco-Environment-Monitoring-Temperature-Notification

warning

N

IManagedElement

F

F

F

0

T

wrn

F

T

F

Power Supply - Critical

cisco-EnvMon-Supply-State-Notification-Trap

critical

N

IManagedElement

F

F

F

0

F

cri

T

T

F

Power Supply - Normal

cisco-EnvMon-Supply-State-Notification-Trap

normal

N

IManagedElement

F

F

F

0

F

clr

T

T

F

Power Supply - Not Functioning

cisco-EnvMon-Supply-State-Notification-Trap

notFunctioning

N

IManagedElement

F

F

F

0

F

maj

T

T

F

Power Supply - Not Present

cisco-EnvMon-Supply-State-Notification-Trap

notPresent

N

IManagedElement

T

F

F

0

F

maj

T

T

F

Power Supply - Shutdown

cisco-EnvMon-Supply-State-Notification-Trap

shutdown

N

IManagedElement

F

F

F

0

F

cri

T

T

F

Power Supply - Warning

cisco-EnvMon-Supply-State-Notification-Trap

warning

N

IManagedElement

F

F

F

0

F

wrn

T

T

F

Fan down trap

fan down trap

fan down trap

N

IManagedElement

F

T

F

0

T

maj

F

T

F

Fan up trap

fan down trap

fan up trap

N

IManagedElement

F

F

F

0

F

clr

F

T

F

RTT Operation Timeout

RTT Operation Timeout

RTT Operation Timeout

N

IManagedElement

F

F

F

0

F

info

T

T

F

RTT Operation Threshold Violation

RTT Operation Threshold Violation

RTT Operation Threshold Violation

N

IManagedElement

F

F

F

0

F

info

T

T

F

dot1qBridge trap

dot1qBridge trap

dot1qBridge trap

N

IManagedElement

F

T

F

0

F

info

F

T

F

Mep up trap

mep trap

mep up

N

IManagedElement

F

F

F

0

F

clr

F

T

F

Mep down trap

mep trap

mep down

N

IManagedElement

F

F

F

0

T

maj

F

T

F

Cold start trap

cold start trap

cold start trap

N

IManagedElement

F

F

T

190000

F

info

T

T

F

SNMP Link down

snmp link down

snmp link down

ce-efp-status-telnet/mtop-mlpppbundle-status-telnet/mtop-ima-group-state-telnet/mtop-cem-group-status/bundle-status/mpls traffic engineering tunnel information/basetech-lldp-neighbors-snmp/basetech-cdp-neighbors-snmp/port-status/ip interface oper status

IPhysicalLayer

F

T

F

0

T

min

F

T

T

SNMP Link up

snmp link down

snmp link up

ce-efp-status-telnet/mtop-mlpppbundle-status-telnet/mtop-ima-group-state-telnet/mtop-cem-group-status/bundle-status/mpls traffic engineering tunnel information/basetech-lldp-neighbors-snmp/basetech-cdp-neighbors-snmp/port-status/ip interface oper status

IPhysicalLayer

F

T

F

0

F

clr

F

T

T

IMA Group Remote Failure

IMA Group Failure trap

IMA Group Remote Failure

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

T

MINOR

F

T

T

IMA Group Remote insufficient links trap

IMA Group Failure trap

IMA Group Remote insufficient links trap

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

T

MAJOR

F

T

T

IMA Group Up Trap

IMA Group Failure trap

IMA Group Up Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

F

CLEARED

F

T

T

IMA Group local Failure

IMA Group Failure trap

IMA Group local Failure

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

T

MINOR

F

T

T

IMA Group local insufficient links trap

IMA Group Failure trap

IMA Group local insufficient links trap

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

T

MAJOR

F

T

T

Ima Link Loss of delay Frame Trap

IMA Link Failure trap

Ima Link Loss of delay Frame Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

T

MINOR

F

T

T

Ima Link Loss of ima Frame Trap

IMA Link Failure trap

Ima Link Loss of ima Frame Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

T

F

0

T

MINOR

F

T

T

Ima Link Rcv Failure Trap

IMA Link Failure trap

Ima Link Rcv Failure Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

T

F

0

T

MINOR

F

T

T

Ima Link Remote Failure Trap

IMA Link Failure trap

Ima Link Remote Failure Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

T

F

0

T

MINOR

F

T

T

Ima Link Up Trap

IMA Link Failure trap

Ima Link Up Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

F

F

0

F

CLEARED

F

T

T

Ima Link Xmt Failure Trap

IMA Link Failure trap

Ima Link Xmt Failure Trap

mtop-ima-group-state,port-status

ImaGroupOid

F

T

F

0

T

MINOR

F

T

T

Cisco UMT state Change trap

Cisco UMT state Change trap

Cisco UMT state Change trap

N/A

PortLayer1Oid

F

F

F

0

F

info

F

T

F

Cisco GSM state Change trap

Cisco GSM state Change trap

Cisco GSM state Change trap

N/A

PortLayer1Oid

F

F

F

0

F

info

F

T

F

IPRAN Backhaul Received Util Acceptable Trap

IPRAN Backhaul Received Util Trap

IPRAN Backhaul Received Util Acceptable Trap

N/A

PortLayer1Oid

F

F

F

0

F

clr

F

T

F

IPRAN Backhaul Received Util Warning Trap

IPRAN Backhaul Received Util Trap

IPRAN Backhaul Received Util Warning Trap

N/A

PortLayer1Oid

F

F

F

0

T

wrn

F

T

F

IPRAN Backhaul Received Util Overloaded Trap

IPRAN Backhaul Received Util Trap

IPRAN Backhaul Received Util Overloaded Trap

N/A

PortLayer1Oid

F

F

F

0

T

maj

F

T

F

IPRAN Backhaul Sent Util Acceptable Trap

IPRAN Backhaul Sent Util Trap

IPRAN Backhaul Sent Util Acceptable Trap

N/A

PortLayer1Oid

F

F

F

0

F

clr

F

T

F

IPRAN Backhaul Sent Util Overloaded Trap

IPRAN Backhaul Sent Util Trap

IPRAN Backhaul Sent Util Overloaded Trap

N/A

PortLayer1Oid

F

F

F

0

T

wrn

F

T

F

IPRAN Backhaul Sent Util Warning Trap

IPRAN Backhaul Sent Util Trap

IPRAN Backhaul Sent Util WarningTrap

N/A

PortLayer1Oid

F

F

F

0

T

maj

F

T

F

Connection Loss detected by ipsla icmp echo trap

ipsla echo connloss trap

connection loss detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

Connection re-establish detected by ipsla icmp echo trap

ipsla echo connloss trap

connection re-establish detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

Timeout detected by ipsla icmp echo trap

ipsla ip or lsp echo timeout trap

timeout detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Connection re-establish detected by ipsla icmp echo trap

ipsla ip or lsp echo timeout trap

connection re-establish detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Threshold crossing under trap

ipsla threshold notification trap

threshold crossing under trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Threshold crossing over trap

ipsla threshold notification trap

threshold crossing over trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Data corruption in rtt operation trap

ipsla threshold notification trap

data corruption in rtt operation trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Data corruption cleared in rtt operation trap

ipsla threshold notification trap

data corruption cleared in rtt operation trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

Connection Loss detected by ipsla icmp echo trap

ipsla echo connloss trap

connection loss detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

Connection Loss detected by ipsla LSP icmp echo trap

ipsla echo connloss trap

connection loss detected by ipsla lsp icmp echo trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

Connection re-establish detected by ipsla icmp echo trap

ipsla echo connloss trap

connection re-establish detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

Connection re-establish detected by ipsla LSP icmp echo trap

ipsla echo connloss trap

connection re-establish detected by ipsla lsp icmp echo trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

Timeout detected by ipsla icmp echo trap

ipsla echo timeout trap

timeout detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

Timeout detected by ipsla LSP icmp echo trap

ipsla echo timeout trap

timeout detected by ipsla lsp icmp echo trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

Connection re-establish detected by ipsla icmp echo trap

ipsla echo timeout trap

connection re-establish detected by ipsla icmp echo trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

Connection re-establish detected by ipsla LSP icmp echo trap

ipsla echo timeout trap

connection re-establish detected by ipsla lsp icmp echo trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

RTT threshold crossing over trap

ipsla echo rtt trap

rtt threshold crossing over trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

RTT threshold crossing under trap

ipsla echo rtt trap

rtt threshold crossing under trap

N/A

ManagedElement

F

F

F

0

F

info

F

T

F

IPSLA LSP path discovery failure trap

ipsla lpd discovery trap

ipsla lsp path discovery failure trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

IPSLA LSP path rediscovery trap

ipsla lpd discovery trap

ipsla lsp path rediscovery trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

IPSLA LDP group status failure trap

ipsla lpd group status trap

ipsla ldp group status failure trap

N/A

ManagedElement

F

F

F

0

F

maj

T

T

F

IPSLA LDP group status restoration trap

ipsla lpd group status trap

ipsla ldp group status restoration trap

N/A

ManagedElement

F

F

F

0

F

clr

F

T

F

FRR Protected Trap

frr trigger trap

frr protected trap

N/A

PortLayer1

F

T

F

0

F

info

F

T

F

FRR Unprotected Trap

frr trigger trap

frr unprotected trap

N/A

PortLayer1

F

T

F

0

F

info

F

T

F

Pseudo wire tunnel up

pseudo wire tunnel traps

Pseudo wire tunnel up

ce-pw-tunnels-status-trap

IPTPLayer2MplsTunnel

F

F

F

0

F

clr

F

T

T

Pseudo wire tunnel down

pseudo wire tunnel traps

Pseudo wire tunnel down

ce-pw-tunnels-status-trap

IPTPLayer2MplsTunnel

F

T

F

0

T

min

F

T

T

vtp configuration revision number error trap

vtp notification prefix trap

vtp Config Rev Number Error

N

VtpKey

F

F

F

0

F

wrn

F

T

F

vtp configuration digest error trap

vtp notification prefix trap

vtp Config Digest Error

N

VtpKey

F

F

F

0

F

maj

F

T

F

vtp VersionOne Device Detected trap

vtp notification prefix trap

vtp VersionOne Device Detected

N

VtpKey

F

F

F

0

F

min

F

T

F

vtp Local Mode Changed trap

vtp notification prefix trap

vtp Local Mode Changed

N

VtpKey

F

F

F

0

F

min

F

T

F

vtp VersionInUse Changed trap

vtp notification prefix trap

vtp VersionInUse Changed

N

VtpKey

F

F

F

0

F

info

F

T

F

Vlan trunk port dynamic status changed to trunking

vlan-trunk-port-dynamic-status

trunking

N

IPortLayer1

F

F

F

0

F

wrn

F

T

F

Vlan trunk port dynamic status changed to not trunking

vlan-trunk-port-dynamic-status

not trunking

N

IPortLayer1

F

T

F

0

F

wrn

F

T

F

REP port state fully operational Trap

REP port operational state change

REP port state fully operational

N/A

IREPService

F

F

F

0

F

clr

F

T

F

REP port state not operational Trap

REP port operational state change

REP port state not operational

N/A

IREPService

F

T

F

0

T

min

F

T

F

REP port role failed Trap

REP port role change trap

REP port role failed

N/A

IREPService

F

T

F

0

F

min

T

T

F

REP port role clear Trap

REP port role change trap

REP port role clear

N/A

IREPService

F

F

F

0

F

clr

F

T

F

Cisco Sonet vt status changed to error

sonet vt status changed

sonet vt status changed to error

N

IPortLayer1

F

T

F

0

F

maj

T

T

T

Cisco Sonet vt status changed to clear

sonet vt status changed

sonet vt status changed to clear

N

IPortLayer1

F

F

F

0

F

clr

F

T

T

CFM cc mep up trap

cisco cfm cc mep down trap

mep up

N/A

ICfmServiceOid

F

F

F

0

F

clr

F

T

F

CFM cc mep down due to timeout trap

cisco cfm cc mep down trap

timeout

N/A

ICfmServiceOid

F

T

F

0

T

minor

F

T

F

CFM cc mep down due to last gasp trap

cisco cfm cc mep down trap

lastgasp

N/A

ICfmServiceOid

F

T

F

0

T

minor

F

T

F

CFM cc cross-connected service error trap

cisco cfm cc cross-connected service error trap

cross-connected service error trap

N/A

ICfmServiceOid

F

F

F

0

F

info

F

T

F

CFM cc cross-connected service error trap clear

cisco cfm cc cross-connected service error trap

cross-connected service error trap clear

N/A

ICfmServiceOid

F

F

F

0

F

clr

F

T

F

CFM cc loop trap

cisco cfm cc loop trap

loop trap

N/A

ICfmServiceOid

F

F

F

0

F

info

F

T

F

CFM cc loop trap clear

cisco cfm cc loop trap

loop trap clear

N/A

ICfmServiceOid

F

F

F

0

F

clr

F

T

F

CFM cc config error trap

cisco cfm cc config error trap

config error trap

N/A

ICfmServiceOid

F

T

F

0

F

info

F

T

F

CFM cc config error trap clear

cisco cfm cc config error trap

config error trap clear

N/A

ICfmServiceOid

F

F

F

0

F

clr

F

T

F

CFM crossconnect mep missing trap

cisco cfm crossconnect mep missing trap

mep missing trap

N/A

ICfmServiceOid

F

T

F

0

T

minor

F

T

F

CFM crossconnect mep unknown trap

cisco cfm crossconnect mep unknown trap

mep unknown trap

N/A

ICfmServiceOid

F

T

F

0

T

minor

F

T

F

CFM crossconnect mep unknown trap clear

cisco cfm crossconnect mep unknown trap

mep unknown trap clear

N/A

ICfmServiceOid

F

F

F

0

F

clr

F

T

F

CFM crossconnect mep service up trap

cisco cfm crossconnect mep service up trap

mep service up trap

N/A

ICfmServiceOid

F

F

F

0

F

clr

T

T

F

Vrrp trap auth failure trap

vrrp trap auth failure trap

vrrp trap auth failure trap

N

IManagedElement

F

F

F

0

T

minor

F

T

F

Vrrp trap new master trap

vrrp trap new master trap

vrrp trap new master trap

N

IManagedElement

F

F

F

0

T

minor

F

T

F

OAM Non-threshold crossing link fault trap

OAM non-threshold crossing trap

linkFault

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM Non-threshold crossing dying gasp trap

OAM non-threshold crossing trap

dyingGaspEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM Non-threshold crossing critical Link trap

OAM non-threshold crossing trap

criticalLinkEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM threshold errored Symbol trap

OAM threshold crossing trap

erroredSymbolEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM threshold errored Frame Period trap

OAM threshold crossing trap

erroredFramePeriodEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM threshold errored Frame trap

OAM threshold crossing trap

erroredFrameEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

OAM threshold errored Frame Seconds trap

OAM threshold crossing trap

erroredFrameSecondsEvent

oam

IPhysicalLayer

F

T

F

0

F

info

F

T

F

CBF File operation state indicator

cbf define file completion

cbf define file completion

N

IManagedElement

F

F

F

0

T

info

F

T

F

Cisco BGP backward transition trap

cisco bgp trap

cisco bgp backward transition trap

N

IBgpNeighbourEntry

F

T

F

0

T

info

F

T

T

Cisco BGP down trap

cisco bgp trap

cisco bgp down trap

N

IBgpNeighbourEntry

F

T

T

0

T

maj

F

T

T

Cisco BGP established trap

cisco bgp trap

cisco bgp established trap

N

IBgpNeighbourEntry

F

F

F

0

T

clr

F

T

T

Cisco BGP prefix threshold exceeded

cisco bgp prefix threshold exceeded

cisco bgp prefix threshold exceeded

N

IProfileContainer (BGP)

F

T

F

0

T

wrn

F

T

T

Cisco BGP prefix threshold clear

cisco bgp prefix threshold exceeded

cisco bgp prefix threshold clear

N

IProfileContainer (BGP)

F

F

F

0

T

clr

F

T

T

Cisco Configuration management event notification

cisco config man event

cisco config man event

N

IManagedElement

F

F

F

0

T

info

F

T

F

cefc fan-tray oper status down

cefc fan tray status changed

cefc fan status down

physical-command

IModule

F

T

T

0

T

cri

F

T

T

cefc fan-tray oper status up

cefc fan tray status changed

cefc fan status up

physical-command

IModule

F

F

F

0

T

clr

F

T

T

cefc FRU inserted

cefc fru removed

cefc fru inserted

physical-command

IModule

F

F

F

0

T

clr

F

T

T

cefc FRU removed

cefc fru removed

cefc fru removed

physical-command

IModule

F

T

T

0

T

maj

F

T

T

cefc module oper status down

cefc module oper status changed

cefc module oper down

physical-command

IModule

F

T

T

0

T

maj

F

T

T

cefc module oper status up

cefc module oper status changed

cefc module oper up

physical-command

IModule

F

F

F

0

F

clr

F

T

T

cefc power status down

cefc power status changed

cefc power status down

physical-command

IModule

F

T

T

0

T

maj

F

T

T

cefc power status up

cefc power status changed

cefc power status up

physical-command

IModule

F

F

F

0

F

clr

F

T

T

sensor value crossed threshold in entSensorThresholdTable

entity sensor threshold notification

entity sensor threshold notification

N

IManagedElement

F

F

F

0

F

maj

T

T

T

Cisco flash copy failed

cisco flash copy completed

cisco flash copy failed

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco flash copy completion

cisco flash copy completed

cisco flash copy completed

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco flash copy in progress

cisco flash copy completed

cisco flash copy in progress

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco Flash device changed

cisco flash device changed

cisco flash device changed

N

IManagedElement

F

F

F

0

F

wrn

F

T

F

Cisco Flash device inserted

cisco flash device removed

cisco flash device inserted

N

IManagedElement

F

F

F

0

F

clr

F

T

T

Cisco Flash device removed

cisco flash device removed

cisco flash device removed

N

IManagedElement

F

F

F

0

F

wrn

F

T

T

Cisco Flash device inserted

cisco flash device removed

cisco flash device inserted

N

IManagedElement

F

F

F

0

F

clr

F

T

T

Cisco Flash device removed

cisco flash device removed

cisco flash device removed

N

IManagedElement

F

F

F

0

F

wrn

F

T

T

Cisco Flash miscellaneous operation failed

cisco flash operation completed

cisco flash operation failed

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco Flash miscellaneous operation completed

cisco flash operation completed

cisco flash operation completed

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco Flash miscellaneous operation in progress

cisco flash operation completed

cisco flash operation in progress

N

IManagedElement

F

F

F

0

F

info

F

T

F

chassis alarm off

chassis alarm trap

chassis alarm off

N

IManagedElement

F

F

F

0

F

clr

F

T

F

chassis alarm on

chassis alarm trap

chassis alarm on

N

IManagedElement

F

T

F

0

T

min

F

T

F

Cisco PIM neighbor lost

cisco pim neighbor lost

cisco pim neighbor lost

N

IRoutingEntry

F

T

T

0

F

info

T

T

T

Cisco ping completion

cisco ping completion

cisco ping completion

N

IManagedElement

F

F

F

0

F

info

F

T

F

Cisco Sonet section status changed to error

sonet section status changed

sonet section status changed to error

N

IPortLayer1

F

T

T

0

F

maj

F

T

T

Cisco Sonet section status changed to clear

sonet section status changed

sonet section status changed to clear

N

IPortLayer1

F

F

F

0

F

clr

F

T

T

Cisco Sonet line status changed to error

sonet line status changed

sonet line status changed to error

N

IPortLayer1

F

T

T

0

F

maj

F

T

T

Cisco Sonet line status changed to clear

sonet line status changed

sonet line status changed to clear

N

IPortLayer1

F

F

F

0

F

clr

F

T

T

Cisco Sonet path status changed to error

sonet path status changed

sonet path status changed to error

N

IPortLayer1

F

T

T

0

F

maj

F

T

T

Cisco Sonet path status changed to clear

sonet path status changed

sonet path status changed to clear

N

IPortLayer1

F

F

F

0

F

clr

F

T

T

MPLS LDP init session threshold exceeded Trap

mpls ldp session down

mpls ldp init session thresh exceeded

N

IPortLayer1

F

T

F

0

T

wrn

F

T

T

MPLS LDP session down Trap

mpls ldp session down

mpls ldp session down

mpls interfaces' and 'label switching table'

IPortLayer1

T

T

T

0

T

min

F

T

T

MPLS LDP session up Trap

mpls ldp session down

mpls ldp session up

mpls interfaces' and 'label switching table'

IPortLayer1

F

T

F

0

T

clr

F

T

T

MPLS-TE tunnel up trap

mpls te tunnel down trap

mpls te tunnel up trap

mpls traffic engineering tunnel information

IMplsTETunnel

F

F

F

0

F

clr

F

T

F

MPLS-TE tunnel down trap

mpls te tunnel down trap

mpls te tunnel down trap

mpls traffic engineering tunnel information

IMplsTETunnel

F

T

F

0

T

maj

F

T

T

MPLS-TE tunnel rerouted trap

mpls te tunnel rerouted trap

mpls te tunnel rerouted trap

N

IMplsTETunnel

F

T

F

0

F

info

T

T

T

Failed receive multicast router heartbeat

cisco multicast router heartbeat failed

cisco multicast router heartbeat failed

N

IManagedElement

F

T

F

0

F

info

F

T

F

Cisco VSS Shelf 1 is Disabled

VSS RF State Change

Shelf 1 is Disabled

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

Cisco VSS Shelf 1 is Standby Cold

VSS RF State Change

Shelf 1 is Standby Cold

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

Cisco VSS Shelf 1 is Standby Hot

VSS RF State Change

Shelf 1 is Standby Hot

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

Cisco VSS Shelf 2 is Disabled

VSS RF State Change

Shelf 2 is Disabled

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

Cisco VSS Shelf 2 is Standby Cold

VSS RF State Change

Shelf 2 is Standby Cold

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

Cisco VSS Shelf 2 is Standby Hot

VSS RF State Change

Shelf 2 is Standby Hot

vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

VSL Connection Changed: Down

VSL Connection State Change

VSL Connection State Down

physical-entity-mib-snmp-cisco6500vss + vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

VSL Connection Change: Up

VSL Connection State Change

VSL Connection State Up

physical-entity-mib-snmp-cisco6500vss + vss-shelfs-status-command

IShelf

F

F

F

110000

F

info

T

T

F

dot1qBridge trap

dot1qBridge trap

dot1qBridge trap

N

IStpService

F

T

F

0

F

info

F

T

F

Mep up trap

mep trap

mep up

N

IManagedElement

F

F

F

0

F

clr

F

T

F

Mep down trap

mep trap

mep down

N

IManagedElement

F

F

F

0

T

maj

F

T

F

Cold start trap

cold start trap

cold start trap

N

IManagedElement

F

F

T

190000

F

info

T

T

F

Cisco hsrp state standby

cisco hsrp state change

cisco hsrp state standby

hsrp information (command under forwarding investigator)

IIPInterface

F

T

F

0

F

info

T

T

T

Cisco hsrp state non active

cisco hsrp state change

cisco hsrp state non active

hsrp information (command under forwarding investigator)

IIPInterface

F

T

F

0

F

info

T

T

T

Cisco hsrp state active

cisco hsrp state change

cisco hsrp state active

hsrp information (command under forwarding investigator)

IIPInterface

F

T

F

0

F

info

T

T

T

Cisco Environment Monitoring Fan Notification - Critical

cisco-Environment-Monitoring-Fan-Notification

critical

N

IManagedElement + identifier index

F

F

F

0

F

cri

T

T

F

Cisco Environment Monitoring Fan Notification - Normal

cisco-Environment-Monitoring-Fan-Notification

normal

N

IManagedElement + identifier index

F

F

F

0

F

clr

T

T

F

Cisco Environment Monitoring Fan Notification - Not Functioning

cisco-Environment-Monitoring-Fan-Notification

notFunctioning

N

IManagedElement + identifier index

F

F

F

0

F

maj

T

T

F

Cisco Environment Monitoring Fan Notification - Not Present

cisco-Environment-Monitoring-Fan-Notification

notPresent

N

IManagedElement + identifier index

T

F

F

0

F

maj

T

T

F

Cisco Environment Monitoring Fan Notification - Shutdown

cisco-Environment-Monitoring-Fan-Notification

shutdown

N

IManagedElement + identifier index

F

F

F

0

F

cri

T

T

F

Cisco Environment Monitoring Fan Notification - Warning

cisco-Environment-Monitoring-Fan-Notification

warning

N

IManagedElement + identifier index

F

F

F

0

F

wrn

T

T

F

Redundant Supply State - Critical

cisco-EnvMon-Redundant-Supply-Notification-Trap

critical

N

IManagedElement + identifier index

F

F

F

0

F

cri

F

T

F

Redundant Supply State - Normal

cisco-EnvMon-Redundant-Supply-Notification-Trap

normal

N

IManagedElement + identifier index

F

F

F

0

F

clr

T

T

F

Redundant Supply State - Not Functioning

cisco-EnvMon-Redundant-Supply-Notification-Trap

notFunctioning

N

IManagedElement + identifier index

F

F

F

0

F

maj

T

T

F

Redundant Supply State - Not Present

cisco-EnvMon-Redundant-Supply-Notification-Trap

notPresent

N

IManagedElement + identifier index

T

F

F

0

F

maj

T

T

F

Redundant Supply State - Shutdown

cisco-EnvMon-Redundant-Supply-Notification-Trap

shutdown

N

IManagedElement + identifier index

F

F

F

0

F

cri

T

T

F