Cisco Active Network Abstraction VNE Reference Guide, 3.6.3
Support Information for Cisco IOS and Cisco IOX Traps
Downloads: This chapterpdf (PDF - 480.0KB) The complete bookPDF (PDF - 6.68MB) | Feedback

Support Information for Cisco IOS and Cisco IOX Traps

Table Of Contents

Support Information for Cisco IOS and Cisco IOX Traps

Cisco IOS V1 Traps

Cisco IOS V2 Traps

Cisco IOX V2 Traps

Registry Parameters for the Events

cbf define file completion

cc copy completion

cfh bundle link status notification

cfh bundle state notification

cfh plane state notification

chassis alarm trap

cisco bgp trap

cisco bgp prefix threshold exceeded

cisco config man event

cisco-Environment-Monitoring-Temperature-Notification

cisco-EnvMon-Supply-State-Notification-Trap

cisco flash copy completed

cisco flash device changed

cisco flash device removed

cisco flash operation completed

cisco multicast router heartbeat failed

cisco pim neighbor lost

cisco ping completion

cisco syslog message generated

cefc fan tray status changed

cefc fru removed

cefc module oper status changed

cefc power status changed

cold start trap

dot1qBridge trap

entity sensor threshold notification

fan down trap

mep trap

mpls ldp session down

mpls te tunnel down trap

mpls te tunnel rerouted trap

pseudo wire tunnel traps

RTT-Operation-Trap

rtt threshold violation or clearance

Cisco Sonet section status changed to error

Cisco Sonet section status changed to clear

Cisco Sonet line status changed to error

Cisco Sonet line status changed to clear

Cisco Sonet path status changed to error

Cisco Sonet path status changed to clear

VSL Connection State Change

VSS RF State Change


Support Information for Cisco IOS and Cisco IOX Traps


This chapter describes the Cisco IOS and Cisco IOX traps that are supported in Cisco ANA. Each trap is described in a section containing:

A table of all the traps, including, the trap name, short description and so on. The short description of the trap is what appears in the ticket, in the V1 Trap and V2-V3 Trap tabs of Cisco ANA EventVision. The short description for each type and subtype can be viewed in the Registry Parameters for the Events section.

A table of all the subtype events which represent one of the states the alarm can be, and a description of when they are issued. For example, the cisco bgp trap can have multiple subtype events (states) which include: Cisco BGP FSM moved to a lower state, Cisco BGP FSM state changed and Cisco BGP FSM established.

Information related to the correlation of the alarm, for example, severity, is ticketable and correlate.

Each section describes a group of traps sharing the same event type.

This chapter includes the following sections:

Cisco IOS V1 Traps

Cisco IOS V2 Traps

Cisco IOX V2 Traps

Registry Parameters for the Events


Note Cisco IOS devices, Cisco XR 12000 Series and the Cisco CRS-1 Carrier Routing System must be configured to send traps in SNMP V2.


Cisco IOS V1 Traps

The following Cisco IOS V1 traps are supported in Cisco ANA:

Table 11-1 Cisco IOS V1 Traps 

Trap Name
Generic Type
Specific Type
Enterprise OID
Description
SubType Varbind OID
SubType Varbind Value
Short Description

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

3

Critical Temperature

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

1

Normal Temperature

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

6

Not Functioning

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

5

Not Present

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

4

Critical Temperature - Device Shutdown

ciscoEnvMonTemperatureNotification

6

3

1.3.6.1.4.1.9.9.13.3.0

cisco Environment Monitoring Temperature Notification

1.3.6.1.4.1.9.9.13.1.3.1.6

2

Temperature Rising

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

3

Power Supply - Critical

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

1

Power Supply - Normal

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

6

Power Supply - Not Functioning

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

5

Power Supply - Not Present

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

4

Power Supply - Shutdown

ciscoEnvMonSuppStatusChangeNotif

6

9

1.3.6.1.4.1.9.9.13.3.0

cisco EnvMon Supply State Notification Trap

1.3.6.1.4.1.9.9.13.1.5.1.3

2

Power Supply - Warning

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3.0

cisco private fan down trap

1.3.6.1.4.1.9.9.13.1.4.1.3

!= 1

Fan down trap

ciscoEnvMonFanNotification

6

4

1.3.6.1.4.1.9.9.13.3.0

cisco private fan down trap

1.3.6.1.4.1.9.9.13.1.4.1.3

1

Fan up trap

rttMonTimeoutNotification

6

2

1.3.6.1.4.1.9.9.42.2.0

This Notification indicates the occurrence of a timeout for a RTT operation

N/A

N/A

RTT Operation Timeout

rttMonThresholdNotification

6

3

1.3.6.1.4.1.9.9.42.2.0

This Notification indicates the occurrence of a threshold violation for a RTT operation

N/A

N/A

RTT Operation Threshold Violation

topologyChange

6

2

1.3.6.1.2.1.17

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

N/A

N/A

dot1qBridge trap

cEtherCfmCcMepUp

6

1

1.3.6.1.4.1.9.9.461

This notification is generated in the following cases:

When a remote MEP first comes up, that is when we receive CC message from that MEP for the first time.

When the device receives a CC message from a MEP for which it has an expired CCDB entry.

When a CC message is received for a remote MEP for which the device already has a CCDB entry and the port-state in the received CC message is different from the cached previous state.

N/A

N/A

Mep up trap

cEtherCfmCcMepDown

6

2

1.3.6.1.4.1.9.9.461

This notification is generated when a remote MEP goes down, namely, the entry in CCDB corresponding to this MEP times out or the device receives a CC message with zero hold-time

N/A

N/A

Mep down trap

coldStart

6

0

1.3.6.1.2.1.11.0

This trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered.

N/A

N/A

Cold start trap


Cisco IOS V2 Traps

The following Cisco IOS V2 traps are supported in Cisco ANA:

Table 11-2 Cisco IOS V2 Traps 

Trap Name
Trap OID
Sub Type Varbind OID
Sub Type Varbind Value
Description
Short Description

cbfDefineFileCompletion

.1.3.6.1.4.1.9.9.81.2.0.1

N/A

N/A

A cbfDefineFileCompletion notification is sent on the following conditions:

Completion of a file consumption operation in case of ephemeral files.

Completion of file creation operation in case of volatile or permanent files.

Any error during file creation.

CBF File operation state indicator

cbgpBackwardTransition

.1.3.6.1.4.1.9.9.187.0.2

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification object ID.

Cisco BGP FSM moved to a lower state

cbgpFsmStateChange

.1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP FSM state changed

cbgpFsmStateChange

.1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP FSM established

cbgpPrefixThresholdExceeded

.1.3.6.1.4.1.9.9.187.0.3

N/A

N/A

The cbgpPrfefixMaxThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family

Cisco BGP prefix threshold exceeded

cbgpPrefixThresholdClear

.1.3.6.1.4.1.9.9.187.0.4

N/A

N/A

The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of bgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, bgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification object ID.

Cisco BGP prefix threshold clear

ccCopyCompletion

.1.3.6.1.4.1.9.9.96.2.1.1

N/A

N/A

A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the ccCopyState is success

Config-copy request completion

ciscoConfigManEvent

.1.3.6.1.4.1.9.9.43.2.0.1

N/A

N/A

Notification of a configuration management event as recorded in ccmHistoryEventTable.

Cisco Configuration management event notification

cefcFanTrayStatusChange

.1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

!=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc Fan-tray oper status down

cefcFanTrayStatusChange

.1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status up

cefcFRUInserted

.1.3.6.1.4.1.9.9.117.2.0.3

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

.1.3.6.1.4.1.9.9.117.2.0.4

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

cefcModuleStatusChange

.1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

.1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

.1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc Power status down

cefcPowerStatusChange

.1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc Power status up

entSensorThresholdNotification

.1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold

sensor value crossed threshold in entSensorThresholdTable

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

!= (0 or 1 or 2)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy failed

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=2

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy completion

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

= (0 or 1)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy in progress

ciscoFlashDeviceChangeTrap

.1.3.6.1.4.1.9.9.10.1.3.0.4

N/A

N/A

A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.

Cisco Flash device changed

ciscoFlashDeviceInsertedNotif

.1.3.6.1.4.1.9.9.10.1.3.0.5

N/A

N/A

A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotif

.1.3.6.1.4.1.9.9.10.1.3.0.6

N/A

N/A

A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.

Cisco Flash device removed

ciscoFlashDeviceInsertedNotifRev1

.1.3.6.1.4.1.9.9.10.1.3.0.7

N/A

N/A

A ciscoFlashDeviceInsertedNotifRev1 notification is sent whenever a removable Flash device is inserted. The ciscoFlashDeviceInsertedNotifRev1 deprecates ciscoFlashDeviceInsertedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotifRev1

.1.3.6.1.4.1.9.9.10.1.3.0.8

N/A

N/A

A ciscoFlashDeviceRemovedNotifRev1 notification is sent whenever a removable Flash device is removed. The ciscoFlashDeviceRemovedNotifRev1 deprecates ciscoFlashDeviceRemovedNotif since it uses ciscoFlashDeviceName as a varbind which is deprecated.

Cisco Flash device removed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation completed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash partitioning Completed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=1

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation in progress

chassisAlarmOff

1.3.6.1.4.1.9.5.0.6

N/A

N/A

Chassis alarm trap

chassis alarm off

chassisAlarmOn

1.3.6.1.4.1.9.5.0.5

N/A

N/A

Chassis alarm trap

chassis alarm on

cPimNbrLoss

.1.3.6.1.4.1.9.10.119.0.2

N/A

N/A

A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.

Cisco PIM neighbor lost

ciscoPingCompletion

.1.3.6.1.4.1.9.9.16.2.0.1

N/A

N/A

A ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated.

Cisco ping completion

rttMonNotification

.1.3.6.1.4.1.9.9.42.2.0.5

N/A

N/A

A rttMonNotification indicates the occurrence of a threshold violation, and it indicates the previous violation has subsided for a subsequent operation.

RTT threshold violation or clearance

ciscoSonetSectionStatusChange

.1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

!=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value more than 1.

Cisco Sonet section status changed to error

ciscoSonetSectionStatusChange

.1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value 1.

Cisco Sonet section status changed to clear

ciscoSonetLineStatusChange

.1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

!=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value more than 1.

Cisco Sonet line status changed to error

ciscoSonetLineStatusChange

.1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value 1.

Cisco Sonet line status changed to clear

ciscoSonetPathStatusChange

.1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

!=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value more than 1.

Cisco Sonet path status changed to error

ciscoSonetPathStatusChange

.1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value 1.

Cisco Sonet path status changed to clear

mplsLdpFailedInitSessionThresholdExceeded

.1.3.6.1.4.1.9.10.65.2.0.1

N/A

N/A

This notification is generated when the value of the `mplsLdpEntityPVLimitMismatchTrapEnable' object is `enabled(1)' and the value of the object, `mplsLdpEntityFailedInitSessionThreshold' has been exceeded.

MPLS LDP init session threshold exceeded Trap

mplsLdpSessionDown

.1.3.6.1.4.1.9.10.65.2.0.4

N/A

N/A

Generation of this trap occurs when the `mplsLdpSessionUpDownTrapEnable' object is `enabled(1)' and the value of mplsLdpSessionState changes from `operational(5)' to any other state.

MPLS LDP session down Trap

mplsLdpSessionUp

.1.3.6.1.4.1.9.10.65.2.0.3

N/A

N/A

Generation of this trap occurs when the `mplsLdpSessionUpDownTrapEnable' object is `enabled(1)' and the value of mplsLdpSessionState changes from any state accept `nonexistent(1)' to `operational'.

MPLS LDP session up Trap

mplsTunnelUp

.1.3.6.1.3.95.3.0.1

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS-TE tunnel up

mplsTunnelDown

.1.3.6.1.3.95.3.0.2

N/A

N/A

This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.

MPLS-TE tunnel down

mplsTunnelRerouted

.1.3.6.1.3.95.3.0.3

N/A

N/A

This notification is generated when a tunnel is rerouted or re-optimized. If the Actual Path is used, then this object MAY contain the new path for this tunnel some time after this trap is issued by the agent

MPLS-TE tunnel reoptimized

ciscoIpMRouteMissingHeartBeats

.1.3.6.1.4.1.9.10.2.3.1.0.1

N/A

N/A

A notification is sent if a multicast router with this feature enabled failed to receive configured number of heartbeat packets from heartbeat sources within a configured time interval

Failed receive multicast router heartbeat

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Disabled

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Cold

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 1 is Standby Hot

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Disabled

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Cold

ciscoRFProgressionNotif

1.3.6.1.4.1.9.9.176.2.0.2

N/A

N/A

VSL link goes down or one of the chassis reloads

Cisco VSS Shelf 2 is Standby Hot

cvsVSLConnectionChangeNotif

1.3.6.1.4.1.9.9.388.0.1

N/A

N/A

When VSL connection is down

VSL Connection Changed: Down

cvsVSLConnectionChangeNotif

1.3.6.1.4.1.9.9.388.0.1

N/A

N/A

When VSL connection is up

VSL Connection Changed: Up

rttMonTimeoutNotification

.1.3.6.1.4.1.9.9.42.2.0.2

N/A

N/A

This Notification indicates the occurrence of a timeout for a RTT operation

RTT Operation Timeout

rttMonThresholdNotification

.1.3.6.1.4.1.9.9.42.2.0.3

N/A

N/A

This Notification indicates the occurrence of a threshold violation for a RTT operation

RTT Operation Threshold Violation

topologyChange

.1.3.6.1.2.1.17.0.2

N/A

N/A

This Notification is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state.

dot1qBridge trap

cEtherCfmCcMepUp

.1.3.6.1.4.1.9.9.461.0.0.1

N/A

N/A

This notification is generated in the following cases:

When a remote MEP first comes up, that is when we receive CC message from that MEP for the first time.

When the device receives a CC message from a MEP for which t has an expired CCDB entry.

When a CC message is received for a remote MEP for which the device already has a CCDB entry and the port-state in the received CC message is different from the cached previous state

Mep up trap

cEtherCfmCcMepDown

.1.3.6.1.4.1.9.9.461.0.0.2

N/A

N/A

This notification is generated when a remote MEP goes down, namely, the entry in CCDB corresponding to this MEP times out or the device receives a CC message with zero hold-time

Mep down trap

coldStart

.1.3.6.1.2.1.11.0.0

N/A

N/A

This trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered.

Cold start trap


Cisco IOX V2 Traps

The following Cisco IOX V2 traps are supported in Cisco ANA:

Table 11-3 Cisco IOX V2 Traps 

Trap Name
Trap OID
Sub Type Varbind OID
Sub Type Varbind Value
Description
Short Description

cbfDefineFileCompletion

.1.3.6.1.4.1.9.9.81.2.0.1

N/A

N/A

A cbfDefineFileCompletion notification is sent on the following conditions:

Completion of a file consumption operation in case of ephemeral files.

Completion of file creation operation in case of volatile or permanent files.

Any error during file creation.

CBF File operation state indicator

cbgpBackwardTransition

.1.3.6.1.4.1.9.9.187.0.2

1.3.6.1.4.1.9.9.187.0.2

!= (1or 6)

The cbgpBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. The bgpPeerRemoteAddr value is attached to the notification object ID.

Cisco BGP FSM moved to a lower state

cbgpFsmStateChange

.1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 1

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP FSM state changed

cbgpFsmStateChange

.1.3.6.1.4.1.9.9.187.0.1

1.3.6.1.4.1.9.9.187.0.2

= 6

The BGP cbgpFsmStateChange notification is generated for every BGP FSM state change.

Cisco BGP FSM established

cbgpPrefixThresholdExceeded

.1.3.6.1.4.1.9.9.187.0.3

N/A

N/A

The cbgpPrfefixMaxThresholdExceeded notification is generated when prefix count exceeds the configured warning threshold on a session for an address family

Cisco BGP prefix threshold exceeded

cbgpPrefixThresholdClear

.1.3.6.1.4.1.9.9.187.0.4

N/A

N/A

The cbgpPrefixThresholdClear notification is generated when prefix count drops below the configured clear threshold on a session for an address family once cbgpPrefixThresholdExceeded is generated. This won't be generated if the peer session goes down after the generation of bgpPrefixThresholdExceeded. The bgpPeerRemoteAddr, bgpPeerAddrFamilyAfi and cbgpPeerAddrFamilySafi values are attached to the notification object ID.

Cisco BGP prefix threshold clear

ccCopyCompletion

.1.3.6.1.4.1.9.9.96.2.1.1

N/A

N/A

A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the ccCopyState is success

Config-copy request completion

cefcFanTrayStatusChange

.1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

!=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc Fan-tray oper status down

cefcFanTrayStatusChange

.1.3.6.1.4.1.9.9.117.2.0.6

1.3.6.1.4.1.9.9.117.1.4.1.1.1

=2

This notification is generated when the value of cefcFanTrayOperStatus changes.

cefc fan-tray oper status up

cefcFRUInserted

.1.3.6.1.4.1.9.9.117.2.0.3

N/A

N/A

The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU inserted

cefcFRURemoved

.1.3.6.1.4.1.9.9.117.2.0.4

N/A

N/A

The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container.

cefc FRU removed

cefcModuleStatusChange

.1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

!=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status down

cefcModuleStatusChange

.1.3.6.1.4.1.9.9.117.2.0.1

1.3.6.1.4.1.9.9.117.1.2.1.1.2

=2

This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing.

cefc module oper status up

cefcPowerStatusChange

.1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

!=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc Power status down

cefcPowerStatusChange

.1.3.6.1.4.1.9.9.117.2.0.2

1.3.6.1.4.1.9.9.117.1.1.2.1.2

=2

The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalIndex of the FRU, and the new operational-status of the FRU.

cefc Power status up

cfhBundleDownedLinkNotification

.1.3.6.1.4.1.9.9.257.0.3

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric bundle link notification.This notification is sent if the value of cfhBundleOperStatus is `up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non-zero to zero.

cfh bundle link status down

cfhBundleDownedLinkNotification

.1.3.6.1.4.1.9.9.257.0.3

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric bundle link notification.This notification is sent if the value of cfhBundleOperStatus is `up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non-zero to zero.

cfh bundle link status up

cfhBundleStateNotification

.1.3.6.1.4.1.9.9.257.0.2

N/A

N/A

Fabric bundle operational state change notification.This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to down

cfhBundleStateNotification

.1.3.6.1.4.1.9.9.257.0.2

N/A

N/A

Fabric bundle operational state change notification.This notification is sent when the cfhBundleOperStatus state transition occurs.

cfh Fabric bundle operational state changed to up

cfhPlaneStateNotification

.1.3.6.1.4.1.9.9.257.0.1

1.3.6.1.4.1.9.9.257.1.2.1.1.3

!=1

Fabric plane operational state change notification.This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status down

cfhPlaneStateNotification

.1.3.6.1.4.1.9.9.257.0.1

1.3.6.1.4.1.9.9.257.1.2.1.1.3

=1

Fabric plane operational state change notification.This notification is sent when the fabric plane operational state transition occurs.

cfh Fabric plane status up

ciscoConfigManEvent

.1.3.6.1.4.1.9.9.43.2.0.1

N/A

N/A

Notification of a configuration management event as recorded in ccmHistoryEventTable.

Cisco Configuration management event notification

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

!= (0 or 1 or 2)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy failed

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

=2

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy completion

ciscoFlashCopyCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.1

1.3.6.1.4.1.9.9.10.1.2.1.1.8

= (0 or 1)

A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated.

Cisco flash copy in progress

ciscoFlashDeviceChangeTrap

.1.3.6.1.4.1.9.9.10.1.3.0.4

N/A

N/A

A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed.

Cisco Flash device changed

ciscoFlashDeviceInsertedNotif

.1.3.6.1.4.1.9.9.10.1.3.0.5

N/A

N/A

A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted.

Cisco Flash device inserted

ciscoFlashDeviceRemovedNotif

.1.3.6.1.4.1.9.9.10.1.3.0.6

N/A

N/A

A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed.

Cisco Flash device removed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation completed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=2

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash partitioning Completed

ciscoFlashMiscOpCompletionTrap

.1.3.6.1.4.1.9.9.10.1.3.0.3

1.3.6.1.4.1.9.9.10.1.2.3.1.4

=1

A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was requested when the operation was initiated.

Cisco Flash miscellaneous operation in progress

ciscoPingCompletion

.1.3.6.1.4.1.9.9.16.2.0.1

N/A

N/A

A ciscoPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated.

Cisco ping completion

ciscoSonetSectionStatusChange

.1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

!=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value more than 1.

Cisco Sonet section status changed to error

ciscoSonetSectionStatusChange

.1.3.6.1.4.1.9.9.126.0.1

1.3.6.1.2.1.10.39.1.2.1.1.1

=1

This notification is generated whenever the value of sonetSectionCurrentStatus changes to value 1.

Cisco Sonet section status changed to clear

ciscoSonetLineStatusChange

.1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

!=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value more than 1.

Cisco Sonet line status changed to error

ciscoSonetLineStatusChange

.1.3.6.1.4.1.9.9.126.0.2

1.3.6.1.2.1.10.39.1.3.1.1.1

=1

This notification is generated whenever the value of sonetLineCurrentStatus changes to value 1.

Cisco Sonet line status changed to clear

sonet path status changed to error

.1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

!=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value more than 1.

Cisco Sonet path status changed to error

ciscoSonetPathStatusChange

.1.3.6.1.4.1.9.9.126.0.3

1.3.6.1.2.1.10.39.2.1.1.1.2

=1

This notification is generated whenever the value of sonetPathCurrentStatus changes to value 1.

Cisco Sonet path status changed to clear

clogMessageGenerated

.1.3.6.1.4.1.9.9.41.2.0.1

N/A

N/A

When a syslog message is generated by the device a clogMessageGenerated notification is sent. The sending of these notifications can be enabled/disabled via the clogNotificationsEnabled object.

Cisco syslog message generated

cPimNbrLoss

.1.3.6.1.4.1.9.10.119.0.2

N/A

N/A

A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.

Cisco PIM neighbor lost

entSensorThresholdNotification

.1.3.6.1.4.1.9.9.91.2.0.1

N/A

N/A

The sensor value crossed the threshold listed in entSensorThresholdTable. This notification is generated once each time the sensor value crosses the threshold

sensor value crossed threshold in entSensorThresholdTable

rttMonNotification

.1.3.6.1.4.1.9.9.42.2.0.5

N/A

N/A

A rttMonNotification indicates the occurrence of a threshold violation, and it indicates the previous violation has subsided for a subsequent operation.

RTT threshold violation or clearance

cpwVcUp

.1.3.6.1.4.1.9.10.106.2.2

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state.

Pseudo wire tunnel up

cpwVcDown

.1.3.6.1.4.1.9.10.106.2.1

N/A

N/A

This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state.

Pseudo wire tunnel down


Registry Parameters for the Events

This section includes the registry parameters for the following event types:

cbf define file completion

cc copy completion

cfh bundle link status notification

cfh bundle state notification

cfh plane state notification

chassis alarm trap

cisco bgp trap

cisco bgp prefix threshold exceeded

cisco config man event

cisco-Environment-Monitoring-Temperature-Notification

cisco-EnvMon-Supply-State-Notification-Trap

cisco flash copy completed

cisco flash device changed

cisco flash device removed

cisco flash operation completed

cisco multicast router heartbeat failed

cisco pim neighbor lost

cisco ping completion

cisco syslog message generated

cefc fan tray status changed

cefc fru removed

cefc module oper status changed

cefc power status changed

cold start trap

dot1qBridge trap

entity sensor threshold notification

fan down trap

mep trap

mpls ldp session down

mpls te tunnel down trap

mpls te tunnel rerouted trap

pseudo wire tunnel traps

RTT-Operation-Trap

rtt threshold violation or clearance

Cisco Sonet line status changed to error

Cisco Sonet line status changed to clear

Cisco Sonet path status changed to error

VSL Connection State Change

VSS RF State Change

cbf define file completion

Table 11-4 cbf define file completion-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

CBF File operation state indicator

cbf define file completion

N

IManagedElement

F

F

F

0

T

info

F

T

F


cc copy completion

Table 11-5 cc copy completion-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Config-copy request completion

cc copy completion

N

IManagedElement

F

F

F

0

T

info

F

T

F


cfh bundle link status notification

Table 11-6 cfh bundle link status notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cfh bundle link status down

cfh bundle link status down

N

IManagedElement

F

F

F

0

F

major

F

T

F

cfh bundle link status up

cfh bundle link status up

N

IManagedElement

F

F

F

0

F

cleared

F

F

T


cfh bundle state notification

Table 11-7 cfh bundle state notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cfh Fabric bundle operational state changed to down

cfh bundle state down

N

IManagedElement

F

F

F

0

T

major

F

T

F

cfh Fabric bundle operational state changed to up

cfh bundle state up

N

IManagedElement

F

F

F

0

T

cleared

F

T

F


cfh plane state notification

Table 11-8 cfh plane state notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cfh Fabric plane status down

cfh plane status down

N

IManagedElement

F

F

F

0

F

major

F

T

T

cfh Fabric plane status up

cfh plane status up

N

IManagedElement

F

F

F

0

F

cleared

F

T

T


chassis alarm trap

Table 11-9 chassis alarm trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

chassis alarm off

chassis alarm off

N

IManagedElement

F

F

F

0

F

cleared

F

T

F

chassis alarm on

chassis alarm on

N

IManagedElement

F

T

F

0

T

minor

F

T

F


cisco bgp trap

Table 11-10 cisco bgp trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco BGP FSM moved to a lower state

cisco bgp backward transition trap

N

IBgpNeighbourEntry

F

T

T

0

T

major

F

T

T

Cisco BGP FSM state changed

cisco bgp down trap

Y

IBgpNeighbourEntry

T

T

F

0

T

info

F

T

T

Cisco BGP FSM established

cisco bgp established trap

Y

IBgpNeighbourEntry

F

F

F

0

F

cleared

F

T

T


cisco bgp prefix threshold exceeded

Table 11-11 cisco bgp prefix threshold exceeded-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco BGP prefix threshold exceeded

cisco bgp prefix threshold exceeded

N

IProfileContainer (BGP)

F

T

F

0

T

warning

T

F

T

Cisco BGP prefix threshold clear

cisco bgp prefix threshold clear

N

IProfileContainer (BGP)

F

T

F

0

F

cleared

T

F

T


cisco config man event

Table 11-12 cisco config man event-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Configuration management event notification

cisco config man event

N

IManagedElement

F

F

F

0

F

info

F

T

F


cisco-Environment-Monitoring-Temperature-Notification

Table 11-13 cisco-Environment-Monitoring-Temperature-Notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Critical Temperature

critical

N

IManagedElement

F

F

F

0

T

critical

F

T

F

Normal Temperature

normal

N

IManagedElement

F

F

F

0

F

cleared

F

T

F

Not Functioning

notFunctioning

N

IManagedElement

F

F

F

0

T

major

F

T

F

Not Present

notPresent

N

IManagedElement

F

F

F

0

T

major

F

T

F

Critical Temperature - Device Shutdown

shutdown

N

IManagedElement

F

F

F

0

T

critical

F

T

F

Temperature Rising

warning

N

IManagedElement

F

F

F

0

T

warning

F

T

F


cisco-EnvMon-Supply-State-Notification-Trap

Table 11-14 cisco-EnvMon-Supply-State-Notification-Trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Power Supply - Critical

critical

N

IManagedElement

F

F

F

0

T

critical

T

T

F

Power Supply - Normal

normal

N

IManagedElement

F

F

F

0

F

cleared

T

T

F

Power Supply - Not Functioning

notFunctioning

N

IManagedElement

F

F

F

0

T

major

T

T

F

Power Supply - Not Present

notPresent

N

IManagedElement

T

F

F

0

T

major

T

T

F

Power Supply - Shutdown

shutdown

N

IManagedElement

F

F

F

0

T

critical

T

T

F

Power Supply - Warning

warning

N

IManagedElement

F

F

F

0

T

warning

T

T

F


cisco flash copy completed

Table 11-15 cisco flash copy completed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco flash copy failed

cisco flash copy failed

N

IManagedElement

F

F

F

0

T

info

F

T

F

Cisco flash copy completion

cisco flash copy completed

N

IManagedElement

F

F

F

0

T

info

F

T

F

Cisco flash copy in progress

cisco flash copy in progress

N

IManagedElement

F

F

F

0

T

info

F

T

F


cisco flash device changed

Table 11-16 cisco flash device changed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Flash device changed

cisco flash device changed

N

IManagedElement

F

F

F

0

F

info

F

T

F


cisco flash device removed

Table 11-17 cisco flash device removed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Flash device inserted

cisco flash device inserted

N

IManagedElement

F

F

F

0

F

cleared

F

T

T

Cisco Flash device removed

cisco flash device removed

N

IManagedElement

F

F

F

0

F

warning

F

T

T


cisco flash operation completed

Table 11-18 cisco flash operation completed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Flash miscellaneous operation completed

cisco flash operation failed

N

IManagedElement

F

F

F

0

T

info

F

T

F

Cisco Flash partitioning Completed

cisco flash operation completed

N

IManagedElement

F

F

F

0

T

info

F

T

F

Cisco Flash miscellaneous operation in progress

cisco flash operation in progress

N

IManagedElement

F

F

F

0

T

info

F

T

F


cisco multicast router heartbeat failed

Table 11-19 cisco multicast router heartbeat failed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Failed receive multicast router heartbeat

cisco multicast router heartbeat failed

N

IManagedElement

F

T

N

0

F

info

F

T

F


cisco pim neighbor lost

Table 11-20 cisco pim neighbor lost-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco PIM neighbor lost

cisco pim neighbor lost

N

IRoutingEntry

F

T

T

0

F

info

F

T

T


cisco ping completion

Table 11-21 cisco ping completion-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco ping completion

cisco ping completion

N

IManagedElement

F

F

F

0

F

info

F

T

F


cisco syslog message generated

Table 11-22 cisco syslog message generated-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco syslog message generated

cisco syslog message generated

N

IManagedElement

F

N/A

N/A

N/A

N/A

N/A

F

T

F



Note The cisco syslog message generated event is dropped without further handling by the system.


cefc fan tray status changed

Table 11-23 cefc fan tray status changed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cefc Fan-tray oper status down

cefc fan status down

physical-command

IModule

F

T

F

0

T

critical

T

T

T

cefc fan-tray oper status up

cefc fan status up

physical-command

IModule

F

F

F

0

T

cleared

F

T

T


cefc fru removed

Table 11-24 cefc fru removed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cefc FRU inserted

cefc fru inserted

physical-command

IModule

F

F

T

0

F

cleared

F

T

T

cefc FRU removed

cefc fru removed

physical-command

IModule

F

T

F

0

F

major

T

T

T


cefc module oper status changed

Table 11-25 cefc module oper status changed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cefc module oper status down

cefc module oper down

physical-command

IModule

F

T

F

0

T

major

F

T

T

cefc module oper status up

cefc module oper up

physical-command

IModule

F

F

F

0

F

cleared

F

T

T


cefc power status changed

Table 11-26 cefc power status changed-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

cefc Power status down

cefc power status down

physical-command

IModule

F

T

F

0

F

major

F

T

T

cefc Power status up

cefc power status up

physical-command

IModule

F

F

F

0

F

cleared

F

T

T


cold start trap

Table 11-27 cold start trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cold start trap

cold start trap

N

IManagedElement

F

F

T

190000

F

info

T

T

F


dot1qBridge trap

Table 11-28 dot1qBridge trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

dot1qBridge trap

dot1qBridge trap

N

IManagedElement

F

T

F

0

T

info

F

T

F


entity sensor threshold notification

Table 11-29 entity sensor threshold notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

sensor value crossed threshold in entSensorThresholdTable

entity sensor threshold notification

N

IManagedElement

F

F

F

0

F

major

T

T

F


fan down trap

Table 11-30 fan down trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Fan down trap

fan down trap

N

IManagedElement

F

T

F

0

T

major

F

T

F

Fan up trap

fan up trap

N

IManagedElement

F

F

F

0

F

cleared

F

T

F


mep trap

Table 11-31 mep trap-Notification-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Mep up trap

mep up

N

IManagedElement

F

F

F

0

F

cleared

F

T

F

Mep down trap

mep down

N

IManagedElement

F

F

F

0

T

major

F

T

F


mpls ldp session down

Table 11-32 mpls ldp session down-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

MPLS LDP init session threshold exceeded Trap

mpls ldp init session thresh exceeded

N

IPortLayer1

F

T

F

0

F

warning

F

T

T

MPLS LDP session down Trap

mpls ldp session down

mpls interfaces and label switching table

IPortLayer1

T

T

T

0

F

minor

T

T

T

MPLS LDP session up Trap

mpls ldp session up

mpls interfaces and label switching table

IPortLayer1

T

T

F

0

F

clear

F

T

T


mpls te tunnel down trap

Table 11-33 mpls te tunnel down trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

MPLS-TE tunnel up

mpls te tunnel up trap

mpls traffic engineering tunnel information

IMplsTETunnel

F

T

F

0

F

clear

F

T

T

MPLS-TE tunnel down

mpls te tunnel down trap

mpls traffic engineering tunnel information

IMplsTETunnel

F

T

F

800

F

major

F

T

T


mpls te tunnel rerouted trap

Table 11-34 mpls te tunnel rerouted trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

MPLS-TE tunnel reoptimized

mpls te tunnel rerouted trap

N

IMplsTETunnel

F

T

F

0

F

info

F

T

T


pseudo wire tunnel traps

Table 11-35 pseudo wire tunnel traps-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Pseudo wire tunnel up

Pseudo wire tunnel up

martini

IPTPLayer2MplsTunnel

F

F

F

0

F

cleared

F

T

F

Pseudo wire tunnel down

Pseudo wire tunnel down

martini

IPTPLayer2MplsTunnel

F

T

F

0

T

major

F

T

F


RTT-Operation-Trap

Table 11-36 RTT-Operation-Trap-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

RTT Operation Timeout

RTT Operation Timeout

N

IManagedElement

F

F

F

0

T

warning

F

T

F

RTT Operation Threshold Violation

RTT Operation Threshold Violation

N

IManagedElement

F

F

F

0

T

warning

F

T

F


rtt threshold violation or clearance

Table 11-37 rtt threshold violation or clearance-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

RTT threshold violation or clearance

rtt threshold violation or clearance

N

IManagedElement

F

T

F

0

T

info

F

T

F


Cisco Sonet section status changed to error

Table 11-38 Cisco Sonet section status changed to error-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet section status changed to error

sonet section status changed to error

N

IPortLayer1

F

T

F

0

F

major

F

T

T


Cisco Sonet section status changed to clear

Table 11-39 Cisco Sonet section status changed to clear-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet section status changed to clear

sonet section status changed to clear

N

IPortLayer1

F

T

F

0

T

cleared

F

T

T


Cisco Sonet line status changed to error

Table 11-40 Cisco Sonet line status changed to error-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet line status changed to error

sonet line status changed to error

N

IPortLayer1

F

T

F

0

F

major

F

T

T


Cisco Sonet line status changed to clear

Table 11-41 Cisco Sonet line status changed to clear-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet line status changed to clear

sonet line status changed to clear

N

IPortLayer1

F

T

F

0

T

cleared

F

T

T


Cisco Sonet path status changed to error

Table 11-42 Cisco Sonet path status changed to error-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet path status changed to error

sonet path status changed to error

N

IPortLayer1

F

T

F

0

F

major

F

T

T


Cisco Sonet path status changed to clear

Table 11-43 Cisco Sonet path status changed to clear-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco Sonet path status changed to clear

sonet path status changed to clear

N

IPortLayer1

F

T

F

0

T

cleared

F

T

T


VSL Connection State Change

Table 11-44 VSL Connection State Change-Subtype Events

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

VSL Connection Changed: Down

VSL Connection State Down

Y

IShelf

F

F

F

0

T

info

T

T

F

VSL Connection Changed: Up

VSL Connection State Up

Y

IShelf

F

F

F

0

T

cleared

T

T

F


VSS RF State Change

Table 11-45 VSS RF State Change-Subtype Events 

Short
Description
Event
Subtype
Expedites
Polling
Event Source
(IMO Name)
Activate
Flow
Correlate
Is Correlation
Allowed
Weight
Auto Clear
Severity
Is Ticketable
Auto
Remove
Flapping

Cisco VSS Shelf 1 is Disabled

Shelf 1 is Disabled

Y

IShelf

F

F

F

0

T

info

T

T

F

Cisco VSS Shelf 1 is Standby Cold

Shelf 1 is Standby Cold

Y

IShelf

F

F

F

0

T

info

T

T

F

Cisco VSS Shelf 1 is Standby Hot

Shelf 1 is Standby Hot

Y

IShelf

F

F

F

0

T

info

T

T

F

Cisco VSS Shelf 2 is Disabled

Shelf 2 is Disabled

Y

IShelf

F

F

F

0

T

info

T

T

F

Cisco VSS Shelf 2 is Standby Cold

Shelf 2 is Standby Cold

Y

IShelf

F

F

F

0

T

info

T

T

F

Cisco VSS Shelf 2 is Standby Hot

Shelf 2 is Standby Hot

Y

IShelf

F

F

F

0

T

info

T

T

F