The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides information about the product structure and product IDs. It contains the following tables:
These tables list system components, their product IDs (the part numbers to use to order the component), and descriptions.
Note | In the following tables, an equals sign (=) at the end of the product ID indicates that the component can be ordered as a spare. For those components, be sure to include the equals sign as part of the product ID. |
Note | Although this appendix provides product IDs for routing system components, the Cisco online ordering and pricing tool has the most up-to-date information on the routing system and product IDs: http://www.cisco.com CCO login is required. Enter a search term such as “CRS” to view a list of components. |
The table below lists the high-level product IDs.
Component |
Product ID |
Description |
---|---|---|
Multishelf System Components |
||
CRS multishelf system |
CRS-MC-FC24 |
Cisco CRS Multishelf System |
The table below lists the PIDs for the fabric card chassis and its components.
Component |
Product ID |
Description |
---|---|---|
Fabric card chassis (complete) |
CRS-FC24(=) |
Cisco CRS FCC for a multishelf system(without switch fabric cards) |
Fabric card chassis (chassis only) |
CRS-FCC(=) |
Cisco CRS routing system FCC (spare chassis) |
Fan tray with fans |
CRS-FCC-FAN-TR(=) |
Cisco CRS FCC fan tray with fans (spare)(2 required for each chassis) |
Cards and modules |
||
Switch fabric card (fabric chassis) |
CRS-FCC-SFC(=) CRS-FCC-SFC-140(=) |
S2 switch fabric cards for 40G system(8 required for each fabric chassis) S2 switch fabric cards for 140G system(8 required for each fabric chassis) |
Switch fabric card blank |
CRS-SFC-IMPEDANCE(=) |
Blank card carrier for each switch fabric slot (used for shipment; must be replaced with fabric card) |
22-port shelf controller card |
CRS-FCC-SC-22GE(=) |
22-port shelf controller Gigabit Ethernet (22-port SCGE) card(2 recommended for each fabric chassis) |
OIM, single-width |
CRS-FCC-OIM-1S(=) |
Optical interconnect module (OIM)(1 required for each S2 fabric card in fabric chassis) |
OIM blank |
CRS-OIM-IMPEDANCE(=) |
Blank carrier for each empty OIM slot |
SFC and OIM eight pack bundle |
CRS-FC24-SFC-8P(=) |
Eight pack of S2 switch fabric cards and optional interconnect modules |
FM-LED |
CRS-FCC-LED(=) |
Fiber module LED card (2 required for each fabric chassis) |
FM-LED blank |
CRS-FM-IMPEDANCE(=) |
Blank carrier for each empty FM-LED slot(required for EMI compliance and cooling) |
Fixed Configuration Power |
||
AC Delta power system |
CRS-FCC-ACD-KIT(=) |
AC Delta power system for fabric chassis(includes 2 power shelves and 6 AC rectifiers) |
AC Wye power system |
CRS-FCC-ACW-KIT(=) |
AC Wye power system for fabric chassis(includes 2 power shelves and 6 AC rectifiers) |
DC power system |
CRS-FCC-DC-KIT(=) |
DC power system for fabric chassis(includes 2 power shelves and 4 power modules) |
AC power rectifier |
CRS-16-AC-RECT(=) |
AC power rectifier for line card chassis(6 required for each chassis; 3 required for each AC power shelf) |
DC PEM |
CRS-16-DC-PEM(=) |
AC power entry module for line card chassis(6 required for each chassis; 3 required for each DC power shelf) |
Alarm module |
CRS-16-ALARM(=) |
Chassis alarm module(1 required for each power shelf) |
Modular Configuration Power |
||
AC power system |
CRS-FCC-ACKIT-M(=) |
AC power system for fabric chassis(includes 2 power shelves and 6 AC PMs) |
DC power system |
CRS-FCC-DCKIT-M(=) |
DC power system for fabric chassis(includes 2 power shelves and 8 DC PMs) |
Alarm module |
CRS-16-ALARM-C(=) |
Chassis alarm module(1 required for each power shelf) |
AC power cord |
CRS-AC-CAB-NA CRS-AC-CAB-AU CRS-AC-CAB-UK CRS-AC-CAB-EU CRS-AC-CAB-IT |
AC power cord—North America AC power cord—Australia AC power cord—United Kingdom AC power cord—Europe AC power cord—Italy Length of each power cord is 4.25 m. |
Cable management and cosmetics |
||
Front cosmetics |
CRS-FCC-FRNT-CM(=) |
Front cosmetics and cable management kit (front door not included) |
Rear cosmetics |
CRS-FCC-REAR-CM(=) |
Rear cosmetics and cable management kit(rear door not included) |
Front door |
CRS-FCC-DRS-FR(=) |
Front door for fabric chassis |
Rear door |
CRS-FCC-DRS-RR(=) |
Rear door for fabric chassis |
AC power grille |
CRS-FCC-ACGRILLE(=) |
Front grille for fixed configuration AC power shelves |
DC power grille |
CRS-FCC-DCGRILLE(=) |
Front grille for fixed configuration DC power shelves |
Modular power grille |
CRS-16-PW-GRILL(=) |
Front grille for modular configuration AC and DC power shelves |
Chassis installation accessories (included with chassis) |
||
Drill hole template |
CRS-LCC-DRILLTEMP(=) |
Aluminum template showing where to drill the mounting holes to secure the chassis to the floor |
Chassis access template |
CRS-LCC-FLOORTEMP (=) |
Mylar template showing chassis door swings and maintenance access area |
Inrigger kit |
CRS-FCC-ALTMNT(=) |
Alternate mounting kit for anchoring chassis to floor |
The table below lists the PIDs for the Cisco CRS 16-slot line card chassis and its components.
Component |
Product ID |
Description |
---|---|---|
Line card chassis(complete) |
CRS-16-LCC/M CRS-16LCC140/M CRS-16/S |
Cisco CRS-1 40G LCC(with 2 route processors [RPs], S13 fabric cards, and optical array cables) Cisco CRS-3 140G LCC(with 2 route processors [RPs], S13 fabric cards, and optical array cables) Cisco CRS LCC(with 2 route processors [RPs] and S123 fabric cards) |
Conversion Kit |
CRS-16-MC-CONVCRS-16-MC140-CONV |
Cisco CRS Multichassis conversion kit that converts a standalone Cisco CRS 16-Slot LCC into a Cisco CRS-1 Multichassis LCCCisco CRS Multichassis conversion kit that converts a standalone Cisco CRS 16-Slot LCC into a Cisco CRS-3 Multichassis LCC |
Switch fabric cards |
||
Switch fabric card (single-shelf system) |
CRS-16-FC/S(=) CRS-16-FC140/S(=) CRS-FCC-SFC400/S (=) |
S123 switch fabric cards for CRS-1 system S123 switch fabric cards for CRS-3 system S123 switch fabric cards for CRS-X system (8 required for each line card chassis) |
Switch fabric card (multi-shelf system) |
CRS-16-FC/M(=) CRS-16-FC140/M(=) CRS-16-FC-400/M(=) |
S13 switch fabric cards for CRS-1 system S13 switch fabric cards for CRS-3 system S13 switch fabric cards for CRS-X system (8 required for each line card chassis) |
Route processors |
||
Route processor |
CRS-16-RP(=) |
Route processor(2 required for each line card chassis) |
Performance route processor (PRP) |
CRS-16-PRP-6G= CRS-16-PRP-12G= |
Performance route processor (6GB memory) Performance route processor (12GB memory) (2 PRPs required for each line card chassis) |
Distributed route processor (DRP) |
CRS-DRP(=) |
Additional route processor for the system (optional) (includes two cards, DRP CPU and DRP PLIM) |
To order DRP cards separately, use the following IDs (both cards are required for DRP operation): |
||
CRS-DRP-B-CPU(=) |
DRP card only (requires DRP PLIM) |
|
CRS-DRP-B-PLIM(=) |
DRP PLIM only (requires DRP CPU) |
|
Fixed Configuration Power |
||
AC Delta power shelf |
CRS-16-LCC-PS-ACD(=) |
AC Delta power shelf for line card chassis (2 required for each chassis) |
AC Wye power shelf |
CRS-16-LCC-PS-ACW(=) |
AC Wye power shelf for line card chassis (2 required for each chassis) |
DC power shelf |
CRS-16-LCC-PS(=) |
DC power shelf for line card chassis (2 required for each chassis) |
AC power rectifier |
CRS-16-AC-RECT(=) |
AC power rectifier for line card chassis(6 required for each chassis; 3 required for each AC power shelf) |
DC PEM |
CRS-16-DC-PEM(=) |
AC power entry module for line card chassis(6 required for each chassis; 3 required for each DC power shelf) |
Alarm module |
CRS-16-ALARM(=) |
Chassis alarm module(2 required for each chassis; 1 required for each power shelf) |
Modular Configuration Power |
||
AC power system |
CRS-16-ACKIT-M(=) |
AC power system for fabric chassis(includes 2 power shelves and 10 AC PMs) |
DC power system |
CRS-16-DCKIT-M(=) |
DC power system for fabric chassis(includes 2 power shelves and 12 DC PMs) |
AC power module |
CRS-PM-AC |
Modular AC power module (Up to 6 required for each power shelf) |
DC power module |
CRS-PM-DC |
Modular DC power module (Up to 8 required for each power shelf) |
Alarm module |
CRS-16-ALARM-C(=) |
Modular power alarm module(1 required for each power shelf) |
AC power cord |
CRS-AC-CAB-NA CRS-AC-CAB-AU CRS-AC-CAB-UK CRS-AC-CAB-EU CRS-AC-CAB-IT |
AC power cord—North America AC power cord—Australia AC power cord—United Kingdom AC power cord—Europe AC power cord—Italy Length of each power cord is 4.25 m. |
Cable management and cosmetics |
||
Front cosmetics |
CRS-16-LCC-FRNT(=) |
Front cosmetics and cable management kit |
Rear cosmetics |
CRS-16-LCC-BCK-CM(=) |
Rear cosmetics and cable management kit |
Front door |
CRS-16-LCC-DRS-FR(=) |
Front doors |
Rear door |
CRS-16-LCC-DRS-RR(=) |
Rear doors |
AC power grille |
CRS-16-ACGRILLE(=) |
Front grille for fixed configuration AC power shelves |
DC power grille |
CRS-16-DCGRILLE(=) |
Front grille for fixed configuration DC power shelves |
Modular power grille |
CRS-16-PW-GRILL(=) |
Front grille for modular configuration AC and DC power shelves |
Chassis installation accessories (included with chassis) |
||
Drill hole template |
CRS-LCC-DRILLTEMP(=) |
Aluminum template showing where to drill the mounting holes to secure the chassis to the floor |
Chassis access template |
CRS-LCC-FLOORTEMP (=) |
Mylar template showing chassis door swings and maintenance access area |
Chassis floor mounting kit |
CRS-16-LCC-ALTMNT(=) |
Alternate mounting kit for anchoring chassis to floor |
For detailed specifications for Cisco CRS routing system PLIMs, RPs and other components refer to the data sheet on: http://www.cisco.com/c/en/us/products/routers/carrier-routing-system/datasheet-listing.html . CCO login is required. |
||
For additional information on Cisco CRS routing system SPA interface processor (SIP) and shared port adapters (SPAs), see Cisco CRS SIP and SPA Hardware Installation Guide . |
The table below lists the product ID numbers for Cisco CRS fabric cables. These cables, which are available in different lengths, connect the S13 fabric cards (in the line card chassis) to the S2 fabric cards (in the fabric chassis). Be sure to order enough cables for your system. The interconnection cables listed are shipped as a set of 24 in the meter length specified.
In the table below, the cable name LCC/M-FC-FBR-XX means the following:
Note | = symbol at the end of a product ID number indicates that the part is a spare , which means the part can be ordered. |
Note | R = symbol at the end of a product ID number indicates that the part is a riser-rated fiber cable. |
Fabric Cable Product ID |
Description and Length |
---|---|
LCC/M-FC-FBR-10= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 10 meters (32.8 feet) |
LCC/M-FC-FBR-15= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 15 meters (49.2 feet) |
LCC/M-FC-FBR-20= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 20 meters (65.6 feet) |
LCC/M-FC-FBR-25= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 25 meters (82 feet) |
LCC/M-FC-FBR-30= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 30 meters (98.43) |
LCC/M-FC-FBR-40= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 40 meters (131.2 feet) |
LCC/M-FC-FBR-50= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 50 meters (164 feet) |
LCC/M-FC-FBR-60= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 60 meters (197 feet) |
LCC/M-FC-FBR-70= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 70 meters (229.7) |
LCC/M-FC-FBR-80= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 80 meters (262.5 feet) |
LCC/M-FC-FBR-90= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 90 meters (295.3feet) |
LCC/M-FC-FBR-100= |
Cisco CRS Line Card Chassis-Fabric Chassis Fiber 100 meters (328 feet) |
LCC/M-FC-FBR-10R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 10 meters (32.8 feet) |
LCC/M-FC-FBR-15R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 15 meters (49.2 feet) |
LCC/M-FC-FBR-20R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 20 meters (65.6) |
LCC/M-FC-FBR-25R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 25 meters (82 feet) |
LCC/M-FC-FBR-30R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 30 meters (98.43 feet) |
LCC/M-FC-FBR-40R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 40 meters (131.2 feet) |
LCC/M-FC-FBR-50R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 50 meters (164 feet) |
LCC/M-FC-FBR-60R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 60 meters (197 feet) |
LCC/M-FC-FBR-70R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 70 meters (229.7) |
LCC/M-FC-FBR-80R= |
Cisco CRS Line Card Chassis-Fabric Chassis Rise-rated r 80 meters (262.5 feet) |
LCC/M-FC-FBR-90R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 90 meters (295.3feet) |
LCC/M-FC-FBR-100R= |
Cisco CRS Line Card Chassis-Fabric Chassis Riser-rated 100 meters (328 feet) |
Note | The Cisco CRS fiber-optic cleaning kit (CRS-FIBER-CLN-KIT=) includes a cleaning tool that advances a continuous roll of lint-free cleaning cloth across the face of the optic. For more information, see the Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide . |