Cisco IOS XR System Error Message Reference Guide, Release 4.3.x
Routing Messages
Downloads: This chapterpdf (PDF - 2.27MB) The complete bookPDF (PDF - 19.88MB) | Feedback

Routing Messages

Table Of Contents

Routing Messages

AIB_CLIENT Messages

AIB Messages

AUTORP_CRP Messages

AUTORP_MAP Messages

BGP_VRF Messages

BGP Messages

C12000_IPV4_MRIB Messages

C12K_MCAST_GTRIE Messages

C12K_MCAST_MDT_EA Messages

C12K_MCAST Messages

CLNS Messages

DAD Messages

EC_TRACE Messages

EIGRP_POLICY Messages

EIGRP Messages

ENXR_MRIB Messages

EVENT Messages

FIB_ForUs Messages

FIB Messages

FWD_HA Messages

HFR_IPV4_MRIB Messages

IGMP_MTRACE Messages

IGPTE_LIB Messages

IP_STATIC_BFD_SESSMGR Messages

IP_STATIC Messages

IPMC_GTRIE_DEBUG Messages

IPMC_GTRIE_DEFAULT Messages

IPV4_ADJ Messages

IPV4_IGMP Messages

IPV4_MCAST_CHKPT Messages

IPV4_MCAST_NETIO_DEBUG Messages

IPV4_MFWD_HFR Messages

IPV4_MFWD_VKG Messages

IPV4_MFWD Messages

IPV4_MLIB_DEBUG Messages

IPV4_MLIB Messages

IPV4_PIM Messages

IPV4MC_STATIC Messages

IPV6_FIB Messages

ISIS_IP_ORA Messages

ISIS Messages

LDP Messages

LMRIB_API Messages

LSPV Messages

MFWD_MA Messages

MLDP_POLICY Messages

MLDP Messages

MOFRR_FLOW Messages

MPLS_ALM Messages

MPLS_FWD Messages

MPLS_HW Messages

MPLS_IMC_CLIENT Messages

MPLS_IO Messages

MPLS_LCAC Messages

MPLS_LSD_CLIENT Messages

MPLS_LSD Messages

MPLS_NETIO Messages

MPLS_STATIC Messages

MPLS_TE_SLSP Messages

MPLS_TE Messages

MPLS_TP_ALARM Messages

MRIB_API Messages

MRIB Messages

MSDP Messages

MULTIVER Messages

ORA_SHARED Messages

ORA Messages

OSPF_EDM Messages

OSPF_POLICY Messages

OSPF_RIB Messages

OSPF_UV Messages

OSPF Messages

OSPFv3_EDM Messages

OSPFV3_POLICY Messages

OSPFv3_RIB Messages

OSPFv3_UV Messages

OSPFv3 Messages

PIM_MA Messages

PIM_NETIO Messages

PIM_POLICY Messages

POLICY_REPOSITORY_DYNREG Messages

POLICY_REPOSITORY_EDM Messages

POLICY_REPOSITORY Messages

RASF Messages

RCMD_LIB_XFORM Messages

RCMD_LIB Messages

RCMD Messages

RETRY Messages

RIB_LIB Messages

RIB_QUERY_ORA Messages

RIB Messages

RIP_POLICY Messages

RIP Messages

RPL_COORD Messages

RRR_PCALC Messages

RSVP Messages

RUMP Messages

SAP_LISTEN Messages

TAGCON Messages

TDP Messages

TIB Messages

TXLIB Messages

UCP_LCTRL_LIB Messages

UCP_LCTRL Messages

UCP_OLM Messages

UCP_OUNI Messages

VKG_CPP_MCAST_GTRIE Messages

VKG_IPV4_MRIB Messages

VKG_MCAST_EDM Messages


Routing Messages


This section contains all routing related System Error Messages, such as MPLS, OSPF, BGP, Multicast, MRIB, RIB, and so forth.

AIB_CLIENT Messages

Error Message     
 
    
    
   

%ROUTING-AIB_CLIENT-3-EXTRA_UNLOCK Adjacency consumer (Job ID: [unsigned int]) attempted extra unlock on adjacency [hex] (interface handle:[hex],protocol:[unsigned int])

Explanation    An unexpected unlock is attempted by adjacency consumer

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AIB Messages

Error Message     
 
    
    
   

%ROUTING-AIB-1-EVENTBLOCK event_block returned early : [chars] (errno equals [dec])

Explanation    An unexpected or erroneous return while waiting for events.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-3-EXTRA_UNLOCK Adjacency consumer (Job ID: [unsigned int]) attempted extra unlock on adjacency [hex] (interface handle:[hex],protocol:[unsigned int])

Explanation    An unexpected unlock is attempted by adjacency consumer

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-CLDATA_ZERO_REFCOUNT AIB has reached zero refcount for clientdata ([pointer])

Explanation    AIB has reached zero refcount for clientdata. This indicates the accounting is incorrect.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-AIB-4-DLLINFO_DB_INIT_FAIL AIB failed to initialize the dllinfo tree ([chars])

Explanation    Initialization of the dllinfo db could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-AIB-4-DLLINFO_ZERO_REFCOUNT AIB has reached zero refcount for dllinfo ([pointer])

Explanation    AIB has reached zero refcount for dllinfo. This indicates the accounting is incorrect.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-AIB-4-IDB_NOT_FOUND Cannot create the IDB, ifh:[hex]

Explanation    No resources to create the IDB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-INDEX_REG_FAIL AIB process cannot register with the platform specific DLL (return equals [dec])

Explanation    The AIB process cannot register with the platform specific adjacency index DLL. The adjacency database will not be created.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-INDEX_VERSION_FAIL AIB process has detected a version mismatch between itself and the platform DLL (DLL version is [dec], AIB expected [dec])

Explanation    The AIB process has detected that the platform specific adjacency indexing DLL has reported a version number that does not match the AIB process version number. Due to this inconsistency, the AIB cannot continue and the system will not be able to process any adjacency information.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-LEN_MISMATCH_CLDATA The client data has changed in length. Old len:[unsigned int], New len:%zu

Explanation    An unexpected change in length of client data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-LTRACE_ERROR Failed to open trace file: [chars]

Explanation    The AIB process was unable to open the trace buffer for automatic tracing (show trace adjacency may not work).

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-NULL_CLDATA The client data has NULL clientdata. Ifh:[hex]

Explanation    An unexpected occurance of clientdata.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-RADIXINIT_FAIL AIB failed to initialize the interface db radix tree ([chars])

Explanation    Initialization of the radix tree could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-AIB-4-SHM_FAIL AIB Shared memory error: [chars] [chars]

Explanation    The AIB process received an error while trying to initialize the shared memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AIB-4-SYSTEM_FAIL [chars] [chars] (errno equals [dec])

Explanation    There was a system call failure resulting in a failure to provide a system service as indicated in the message text.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AUTORP_CRP Messages

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-BAG_RELATED_ERROR Bag related error: [chars]

Explanation    The Candidate RP had trouble wth Bags.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EDM_ACCESS_ERROR Sysdb EDM related error: [chars], [chars]

Explanation    The Candidate RP had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EVENT_CONN_MGR_ERROR Event connection manager error : [chars], [chars]

Explanation    Failed to open connection to Connection Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EVENT_MGR_CREATE_FAILED Failed to create an event manager

Explanation    A problem occurred when a call to event_manager_create() was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-GEN_ERROR Error : [chars] failed - [chars]

Explanation    General Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-IM_RELATED_ERROR A call to [chars] returned [chars]

Explanation    A problem occurred when a call to IM was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-INIT_FAILED Initialization failed : [chars]

Explanation    autorp_candidate_rp failed to initialize successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-IPARM_RELATED_FAILURE A call to [chars] returned [chars]

Explanation    A problem occurred when a call to one of the IPARM APIs was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-MALLOC_FAILED malloc() failed : failed to allocate memory to receive messages

Explanation    A call to malloc() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SOCKET_ERROR Socket Error : [chars] : [chars]

Explanation    Socket Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SYSDB_ACCESS_ERROR Sysdb related error: [chars], [chars]

Explanation    The Candidate RP had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SYSDB_REGISTRATION_FAILED Sysdb registration error: [chars]

Explanation    The Candidate RP had trouble registering as a notifier with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-TIMER_ERROR Timer Error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-TUPLE_ERROR Tuple operation error : [chars]

Explanation    Tuple operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AUTORP_MAP Messages

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-BAG_RELATED_ERROR Bag related error: [chars]

Explanation    The Mapping Agent had trouble wth Bags.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-DEBUG_ERROR Debug error : [chars]

Explanation    Debug Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EDM_ACCESS_ERROR Sysdb EDM related error: [chars], [chars]

Explanation    The Mapping Agent had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EVENT_CONN_MGR_ERROR Event connection manager error: [chars], [chars]

Explanation    Failed to open connection to Connection Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EVENT_MGR_CREATE_FAILED A call to event_manager_create() failed

Explanation    A problem occurred while calling the event_manager_create() API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-IM_RELATED_ERROR The function [chars] returned error : [chars]

Explanation    Failed some IM related operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-INIT_FAILED Initialization failed : [chars]

Explanation    autorp_mapping_agent failed to initialize successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-INIT_FAILED_ERR '[chars]' initialization failed : [chars]

Explanation    autorp_mapping_agent failed to initialize successfully

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-IPARM_RELATED_FAILURE A call to [chars] returned [chars]

Explanation    A problem occurred when a call to one of the IPARM APIs was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-MALLOC_FAILED malloc() failed : failed to allocate memory to receive messages

Explanation    A call to malloc() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-OOR_LIMIT Cache maximum reached: [dec], new group range not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-RTREE_ERROR RTree error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SOCKET_ERROR Socket Error : [chars] : [chars]

Explanation    Socket Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SYSDB_ACCESS_ERROR Sysdb related error: [chars], [chars]

Explanation    The Mapping Agent had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SYSDB_REGISTRATION_FAILED Sysdb registration error: [chars]

Explanation    The Mapping Agent had trouble registering as a notifier/edm with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-TIMER_ERROR Timer Error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-TUPLE_ERROR Tuple operation error : [chars]

Explanation    Tuple operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BGP_VRF Messages

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-DUPLICATE_ID Failed to store [chars] ID [hex] for VRF [chars].

Explanation    A ID has been received from RSI that duplicates an existing VRF or table ID. As a result, the new ID has been ignored, and subsequent operation for that VRF will be incorrect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP VRF module. The BPM process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-NOTIFY Failed to apply configuration change for: [chars] ([chars]).

Explanation    A notification of a configuration change could not be applied, leaving the internal data structures inconsistent with the configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-RD_APPLY Failed to apply RD configuration change for [chars]. System may now be in an inconsistent state.

Explanation    The RD value for the VRF failed to be set, leaving the internal data structures inconsistent with the configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-RD_PUBLISH Failed to publish RD configuration: [chars]. System may now be in an inconsistent state.

Explanation    The RD value for a VRF or set of VRFs failed to be published.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BGP Messages

Error Message     
 
    
    
   

%ROUTING-BGP-2-ADDROUTE Failed to add net [chars] to the BGP table

Explanation    An error occurred whilst trying to insert a net to the BGP table database.

Recommended Action    'This error occurs when we are not able to add a net to the BGP table' 'database. In some cases the nbr that had sent that net would reset ' ' and the issue would recover. In other cases you might see an ' 'accompanying low memory message. Please check to make sure you have ' 'enough free/available memory on the router. '

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_EVM_EVENT_BLOCK Error in event loop for [chars] thread: [chars]

Explanation    'An error occurred in the event loop. In most of the cases'' 'it will recover.' *RECUR*

Recommended Action    Please provide output from the following commands: - show version - show install active - show dll - show running-config - show configuration failed - show configuration history 5 - show commit changes last 5

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_FILE_ATTACH Failed to do [chars] event file attach - [chars]

Explanation    An error occurred when bgp try to do event file attach.

Recommended Action    ' In most cases the problem will recover by resetting the nbr' 'for which file attach is failing. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition. BGP may not operate correctly until the process is restarted.

Recommended Action    Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_THREAD_DEADLOCK Deadlock detected (thread [unsigned int]): holding: [chars]

Explanation    BGP detected a lock being held when all locks should have been released.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-FATAL_WRAPPER Fatal error: A call to [chars] failed unexpectedly: [chars]

Explanation    A function call failed unexpectedly - this is probably a system problem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-NSR_RESTART_FAILED NSR has been unconfigured and configured too many times in a short period of time. Forcing a restart of standby bgp to restore NSR functionality.

Explanation    Standby BGP restarts itself when NSR is disabled. If standby BGP attempts to restart itself too many times, then sysmgr will block any further restart attempt. If standby BGP does not restart, then NSR functionality might be affected when NSR is enabled the next time. Therefore, a restart is forced by a call to exit().

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-2-TRIGGER_FO Triggering switch-over to keep NSR up, Failure reason: [chars]

Explanation    If nsr switch-over knob is on, active bgp will trigger the switch over in case of tcp failure or bgp failure if nsr is ready and install is not in process.

Recommended Action    This msg is info only. Analysis should be done if switch-over is not expected.

Error Message     
 
    
    
   

%ROUTING-BGP-3-AF_LIB_FILE_ERROR Failed to read Address Family data file: [chars] [chars]

Explanation    'File/Directory open operation failed, or the data in the file was corrupt'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-AF_LIB_FILE_WRONG_INFO Failed to read Address Family data file [chars]: [chars] on line [unsigned int]

Explanation    'The data in the Address Family data file was corrupt'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ALREADY_DONE Cannot [chars]%s: already done

Explanation    An operation could not be performed because it had already been completed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ASYNC_IPC due to [chars], with error [chars], rc [dec]

Explanation    This message indicates that the BGP async ipc operation has error condition with the specified reason. BGP being an application of the AIPC services, it relies on the infrastructure to deliver it's ipc messsages, BGP will have recovery mechanism such as close the channel, or try to resend the message if it failed. Sometimes, this error can be 'normal' due to process restart, FO, or too much IPC messages cause IPC queues to be congested.

Recommended Action    Some of the async ipc status is saved in the trace using 'show bgp trace aipc', and together with this message, it might be able to gather more inforamtion regarding this error.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_BAD Failed to [chars] RIB due to an invalid attribute key number ([hex])

Explanation    There is a problem with the attribute key generation routine.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_CHKPT Failed to checkpoint attribute key

Explanation    The chkpt library failed to checkpoint the attribute key number. Normal operation of BGP (standalone) or bRIB (distributed) is not impacted unless the process is restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_OVERFLOW Failed to generate a new attribute key for the incoming UPDATE

Explanation    This is an extremely rare case where the attribute key overflow protection mechanism fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BAD_REFCNT Bad reference count value ([unsigned int]) for [chars] ([pointer] index [dec])

Explanation    'This indicates a internal data structure inconsistency'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_AS_INIT As-num is not set yet in bpm and can not apply other config

Explanation    Should not attempt to publish anything untill AS number is set.

Recommended Action    This warnning will show up for possible out of order sysdb notification

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP process manager. If this occurred during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_PROCESS_START Failed to start [chars] process [chars]: [chars]

Explanation    The BPM failed to start the process in the error message. As a result, the process will not be running.

Recommended Action    Check that the process is not already running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is not running, attempt to start it using the 'process restart' command. If other error messages are seen along with this one, or when attempting to manually start the process, please consult the documentation for those errors and attempt to rectify them. If problems persist, copy this error message and any others exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_PROCESS_STOP Failed to stop [chars] process [chars]: [chars]

Explanation    An error occurred when trying to stop the process specified in the error message. As a result, the process may still be running, which could adversely affect the operation of other processes.

Recommended Action    Check whether the process is still running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is running, kill it using the 'process kill' command. If problems persist, copy this error message and any subsequent ones exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_SWITCH_MODE Failed to switch to [chars] mode: [chars] ([chars])

Explanation    An error occurred when switching between standalone and distributed mode.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BRIB_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP RIB. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BUF_TOO_SHORT A string buffer was too short during a string print operation (string [chars] truncated)

Explanation    Whilst trying to format a string, the buffer passed in was too short and the string was truncated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-COMM_DECODE_RDINFO [chars] [unsigned int] [unsigned int]

Explanation    Standby BGP received invalid Route Distinguisher information from Active BGP. *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_DEL Notify delete of [chars] failed with warning: [chars], no further action necessary.

Explanation    A speaker or the bRIB failed to process the removal of some configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_FALLOVER Apply for fast-external-fallover failed: [chars]

Explanation    A speaker failed to process a configuration change for 'fast-external-fallover'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_SET Notify for [chars] failed with error: [chars], system may now be in an inconsistent state.

Explanation    A speaker or the bRIB failed to process a configuration change.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CREATE_REGS Create Registration failed: intfhandle ([unsigned int]) for interface [chars]

Explanation    'Create and Delete Registration Failed for the named interface'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DEBUG_CONFIG Failed to apply debug configuration: [chars]

Explanation    An error occurred whilst applying the debug configuration

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DELPATH Attempted to delete path from empty net [chars]

Explanation    An attempt was made to delete a path from a net with a path count of 0

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DLL_ERROR Failed to [chars] [chars] DLL: [chars]

Explanation    An error occurred whilst trying to open or initialize a DLL. The process will be restarted if this error occurs during process startup.

Recommended Action    If the process has been restarted and the problem recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EDM_INIT_FAILED EDM server initialization failed: [chars]: [chars]

Explanation    Initialization of the EDM server failed. The process will be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ERR_ALM_API ALM/LSD API: [chars] - [chars] failed

Explanation    An ALM/LSD API returned an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ERR_ALM_ONE_LABEL Unable to allocate label: [chars] - net [chars] tableid [hex] request type [dec] fpi_err:[hex]

Explanation    The ALM/LSD API was unable to allocate a requested label.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ERR_GENERAL [chars]

Explanation    A non-fatal fault occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ERR_PATH_ELEM Error encountered during [chars] of path element of network [chars] for [chars] address-family. Error code is [dec] ([chars]).

Explanation    There was an error associated with path element operation, most likely due to low memory conditions. BGP may not operate correctly until the process is restarted.

Recommended Action    Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EXTCOMM Failed to create extended community: [chars]

Explanation    The import table list associated with an extended community set could not be created. This can occur if there is insufficient memory to allocate the import table list, or the number of importing tables exceeds the hard coded limit on the number of tables that a route may be imported into.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EXTCOMM_ADD Failed to add one or more [chars] extended community for table [chars] prefix [chars]

Explanation    While attaching extended communities to the path attribute we reached the maximum extended community limit and as a result we failed to add one or more extended community to the path attribute.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-GWCTX_CREATE Failed to [chars] for Gateway Context (VRF [chars], Gateway address-family [chars])

Explanation    A software error has occurred whilst trying to initialize gateway context database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-HA_INIT Initialization failed ([chars]%s)

Explanation    High Availabality initialization failed. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IFACE_LOOKUP Interface lookup for [chars] Failed: [chars]

Explanation    Interface manager failed to lookup nexthop interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IM_DMZLINK_BW Failed to register for DMZ link bandwidth change for neighbor [chars]: [chars]

Explanation    BGP failed to register with interface manager for DMZ link bandwidth change notifiction for a given neighbor

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IMPORT_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the import thread. If this occurred during process startup, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INIT_GET_VALUE Failed to obtain [chars] during initialization: [chars]

Explanation    An error occurred when retrieving a required value during initialization. As a result the BGP process can not initialize.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INITSYNC_FAILED [chars]

Explanation    There was problem during init sync

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INITSYNC_PFX_MISMATCH [chars]

Explanation    The number of prefixes synced by active doesn't match the expected count.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INSUFMEM Failed to allocate memory for [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INTERNAL_ERROR Internal error ([chars])

Explanation    A non-fatal fault occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INVAL_REDUNDANCY_ROLE Initialization failed ([chars]%s)

Explanation    An invalid Redundancy Role was delivered to BGP. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IO_INIT Initialization failed: [chars] [chars] ([chars])

Explanation    An error occurred while initializing the IO thread in speaker process. The process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IO_INITSYNC_SESSION_FAILED [chars] - for session, retry

Explanation    A problem occurred in TCP init sync.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-LABEL_INIT Initialization of BGP/LABEL failed ([chars]:[chars])

Explanation    An error occurred whilst initialising the LABEL thread. This could be caused by failure to allocate resources or by errors when calling the MPLS label manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-LOCK_RECURSIVE Attempt to recursively lock net [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to lock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MALFORM_UPDATE Malformed UPDATE message received from neighbor [chars] (VRF: [chars]) - message length [unsigned int] bytes, error flags [hex], action taken [chars]. Error details: [chars]. NLRIs: [[chars]][chars]%s

Explanation    This message indicates that the UPDATE message contains one or more malformed attributes. Depending on the nature and severity of the error and error-handling configuration, one of the following actions has been taken: discard the attribute, or treat the UPDATE as withdraw, or reset the session, or ignore the entire update message.

Recommended Action    The malformed UPDATE messages are available in 'show bgp update in error'; it should be decoded and analyzed.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MAX_IMPORT No. of importing VRFs exceeds max ([unsigned int]), limited to [unsigned int] tables: (Err: [chars])

Explanation    There is a hard coded limit on the number of tables that a route may be imported into. This limit has been exceeded, so the route may not be present in some of the importing tables. The limit is such that this message should not be seen under normal operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MAX_VALUE_EXCEEDED The value of [chars] ([unsigned int]) exceeds the maximum value: [unsigned int]

Explanation    The value of an internally computed variable has exceeded the maximum value

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MIB_INIT BGP MIB init failed ([chars])

Explanation    An error occurred while initializing the BGP MIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NBR_NSR_DISABLED NSR disabled on neighbor [chars] due to [chars]

Explanation    NSR has been disabled on the neighbor temporarily due to transport issues.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NEGCOUNTER Negative path counter for peer [chars]

Explanation    The counter value for accepted prefixes is wrong and less than zero

Recommended Action    The counter can be corrected by resetting the session. However, the only behavior affected by an incorrect counter is enforcement of the 'max-prefix' command.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NH_LOCK_RECURSIVE Attempt to recursively lock nexthop [pointer] (lock: [hex], vrf: [chars], afi: [chars])

Explanation    A software error has occurred whilst trying to lock a nexthop entry in the BGP nexthop Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NH_UNLOCK_ERR Failed to unlock nexthop node [pointer] (nh '[chars]', lock [hex], vrf '[chars]', afi '[chars]', cnt [unsigned int], ln [unsigned int])

Explanation    A software error has occurred whilst trying to unlock an entry in the BGP nexthop Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NOMEM_RESET Failed to allocate memory for [chars], resetting neighbor

Explanation    The requested operation could not be accomplished because of a low memory condition. One or more neighbor sessions have been reset to free some memory.

Recommended Action    In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NOMSGCHUNK Failed to allocate [unsigned int] bytes from the memory pool for message of type [unsigned int]

Explanation    A request was made to allocate a message size for which there was no memory pool large enough. This may indicate a software error in the calculation of the requested size.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NOPAK_CONN Failed to clean up packet manger connection [chars]

Explanation    A connection to the packet manager could not be established.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_INSTBUILD Failed to build [chars]: [chars] ([chars])

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_ORABUILD Failed to build ORA[chars]: [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-OVERCOUNTER [chars] counter overflow

Explanation    A counter with maximum value was incremented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-PENDING_MSG_ERR [chars] pending [chars] msg [chars] the pending msg list

Explanation    A problem occurred while adding/removing pending msg.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-QAD_FAILURE QAD failure - [chars]

Explanation    BGP detected an error condition in QAD. String should contain more info.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-QAD_SEND_ERR QAD send err [chars] - BGP will reinitialize NSR

Explanation    An error occurred to send msg to the QAD queue - this triggers NSR resynchronization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-QAD_TIMEOUT QAD timeout - BGP will reinitialize NSR

Explanation    A message is dropped in the QAD queue - this triggers NSR resynchronization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_CREATE Failed to [chars] for RD [chars], address-family [chars]

Explanation    A software error has occurred whilst trying to initialize RD node inside BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_LOCK_RECURSIVE Attempt to recursively lock rdinfo [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to lock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_UNLOCK_ERR Failed to unlock RD node [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to unlock an entry in the BGP RD Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-REDIST_FAIL Failed to register with the RIB for redistribution of [chars] [chars] [chars] routes: [chars]

Explanation    A RIB client library call for redistribution of routes failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_CONN_FAIL Failed to open connection to the RIB for address family [unsigned int]: [chars]

Explanation    The connection to the RIB could not be established and a retry timer could not be started

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_FAIL Failed to [chars] for [chars] while calling the RIB instance [unsigned int]: [chars]

Explanation    A RIB library call failed unexpectedly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP RIB thread. The process will be restarted if this error occurs during process startup.

Recommended Action    If the process has been restarted and the problem recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_INIT_FAIL Initialization to RIB failed for [chars]: [chars]

Explanation    An error occurred whilst initialising the RIB for a new address family. This could be caused by failure to allocate resources or by errors when calling the Table Resource Manager or the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_RETRY_FAIL RIB route retry failure: [chars] for [chars]

Explanation    Some routes were not successfully installed in the RIB. Consequently, an attempt was made to save these routes to retry later. However, an error was encountered during the save attempt.

Recommended Action    Issue a 'clear route address family sub-address family' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_TABLE_FAIL Failed to [chars] for [chars], RIB table [hex]

Explanation    An error was encountered during some operation for the specified address family and RIB table. This could be due either to a lack of resources or a software problem.

Recommended Action    Issue a 'clear route address family sub-address family' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.

Error Message     
 
    
    
   

%ROUTING-BGP-3-SCAN_INIT Scanner library initialization failed ([chars]%s)

Explanation    An error occurred while initializing the scanner library. The process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-SPKR_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP speaker process. If this occurred during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-TABLE_CREATE Failed to create table context for the vrf [chars] afi/safi [dec]/[dec]: [chars]

Explanation    An error occurred when creating the table context for the shown vrf name, afi, safi. As a result table can't be activated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-TBLATTR_VERSION Unable to propagate table attribute versions for [chars] : [chars]

Explanation    An internal error was encountered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-TIMER_PARENT_CHANGE failed for neighbor [chars], [chars]

Explanation    There was an error in IOS-XR managed timer library API. *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-UNDERCOUNTER [chars] counter underflow

Explanation    A counter with zero value was decremented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-UNKNOWN_MEMSTATE BGP received a notification about an unknown memory state ([unsigned int])

Explanation    BGP received a low memory notification from wdsysmon for an unknown memory state, ie not NORMAL, MINOR, SEVERE or CRITICAL. As a result, no action was taken.

Recommended Action    Check the memory on the node, and if it is low, take manual action to release memory, eg by resetting some BGP neighbors (using the 'clear bgp' command).

Error Message     
 
    
    
   

%ROUTING-BGP-3-UNLOCK_ERR Failed to unlock net [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to unlock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-UPD_BUFFER_SMALL The update message used when advertising prefix [chars] in table [chars] / update-group [chars] / sub-group [chars] is too small to format attributes. Message details: datagram size [unsigned int], total length [unsigned int], attributes length [unsigned int] (calculated [unsigned int])

Explanation    An allocated message did not have enough space required to format all the attributes of a prefix. When such an error encountered, a Withdraw message is generated for the prefix under consideration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-VRF_CREATE Failed to create VRF context for the vrf [chars] : [chars]

Explanation    An error occurred when creating the vrf context for the shown vrf name. As a result VRF can't be enabled.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-VRF_DELETE VRF [chars] still has undeleted table afi/safi [dec]/[dec]. Table will be deleted.

Explanation    An error occurred while deleting the VRF. An address-family table under the VRF is still not deleted. Ideally all the tables under the VRF should be deleted first before VRF is deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-ATTRKEY_INCONSISTENT BGP detected an inconsistency in attribute key generation. Will correct the problem by renumbering all attributes

Explanation    The attribute key generation routine has gone beyond the checkpointed value. This is a rare condition to occur as the key generation algorithm is very simple.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-BFD_INVALID_NBR Attempt to register BFD session on invalid neighbor: [chars]

Explanation    Internal error indicating that an attempt has been made to create a BFD session for a neighbor type that is not supported by BFD.

Recommended Action    The BFD session for the neighbor in the log will not be created. If a BFD session for this neighbor is not required, no further action is needed. To re-attempt creation of a BFD session for this neighbor, remove and re-add the bfd fast-detect configuration for the neighbor.

Error Message     
 
    
    
   

%ROUTING-BGP-4-BPM_NEG_NBR BGP and sysdb are out of sync (neighbor configuration was present but no neighbors in BGP)

Explanation    BGP and sysdb are out of sync (neighbor config present but no neighbor in bgp) and as a result, unconfiguring neighbor results in negative neighbor count in BGP

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-4-CAP_4BYTEAS Capability 4-byte-as suppress misconfigured for neighbor [chars]

Explanation    Possible misconfiguration with 'capability 4-byte-as suppress'. This configuration can be inherited from either a neighbor-group or a session-group by a neighbor whose remote-as is a 4-byte as number. Suppress should be off for such neighbor.

Recommended Action    Check the bgp configuration. Remove the 'capability 4-byte-as suppress' configuration or disable it to prevent getting inherited from the neighbor-group or a session-group

Error Message     
 
    
    
   

%ROUTING-BGP-4-DESTROY_CHUNK Chunk pool [chars] is no longer in use but cannot be destroyed

Explanation    'BGP has resized its bit fields, so the old bit field chunks should be ' 'destroyable. Nonetheless, BGP is unable to destroy the old chunk and, ' 'hence, cannot release unwanted memory.'

Recommended Action    This error will not cause any erroneous behavior, hence no further action is needed to rectify the situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-ENCODE_NET_OVERRUN Encoding [chars] has overrun the msg buffer (writen size [unsigned int], max size [unsigned int])

Explanation    Encoding the net has overrun the msg buffer. It may corrupt some memory.

Recommended Action    This warning indicates possible memory overrun.

Error Message     
 
    
    
   

%ROUTING-BGP-4-ERR_MALFORMED_ORF Ignored Received malformed entry message in [chars]

Explanation    The ORF entry is encoded wrongly

Recommended Action    To be followed

Error Message     
 
    
    
   

%ROUTING-BGP-4-FEEDBACK_OUT_OF_ORDER out-of-order feedback from RIB for table [chars], table-id [hex], version [unsigned int], prev [unsigned int]

Explanation    This message indicates that BGP has received an out-of-order feedback from RIB. The system will recover by itself.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-4-FEEDBACK_OUTSIDE_RANGE outside range feedback from RIB for table [chars], table-id [hex], version [unsigned int], table version [unsigned int]

Explanation    This message indicates that BGP has received a feedback from RIB that is larger than the table version. The system will recover by itself.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-4-INCONSISTENT Detected inconsistent config state: [chars]

Explanation    The internal state representing the configuration was invalid, but has now been fixed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-INCONSISTENT_ASPATHMERGE received an UPDATE from [chars] with Inconsistent AS_PATH and AS4_PATH, action [chars]

Explanation    This message indicates that the AS_PATH and AS4_PATH attributes in the UPDATE consist of segments that are inconsistent when doing a merge, discard the AS4_PATH in this case

Recommended Action    A counter is available in 'show bgp neighbor', to log this event and displayed only when the count is greater than 0.

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_DEL_ADD Trying to Readd L2VPN [chars] when previous instance is still in Deletion

Explanation    BGP detected that an attempt was made to instantiate an L2VRF when the instance is in the process of being deleted. This will happen when the router-id is unconfigured, configured with another value and reconfigured with the first value all in very quick succession.

Recommended Action    This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_RD_LOCAL_AND_REMOTE RD 0x [pointer] is marked both local and remote

Explanation    BGP detected that the RD is marked both local and remote This means that the local table_ctx points to this rdinfo but this rdinfo points to the shared tabel_ctx

Recommended Action    This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_READD Trying to Readd L2VPN [chars] when previous instance is still there

Explanation    BGP detected that an attempt was made to instantiate an L2VRF when the instance still exists. This will happen when the L2VPN module can issue two successive adds followed by delete wheres they meant to send add, delete and then add.

Recommended Action    This msg is info only. At this point BGP and L2VPN will be out of sync Need process restart to achive sync

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_SIGNAL_MISMATCH Same RD Net [chars] or [chars] does not match VRF Signalling Type

Explanation    BGP detected that the prefix was learnt with a signalling type different from what is configured for the vrf. We do not allow both types of signalling for nets with the same RD

Recommended Action    This msg is info only. Need to check L2VPN Configuration in the topology across all PEs.

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_SIGNAL_OVERLAP Net [chars] or [chars] is learnt via both types of Signalling

Explanation    BGP detected that the same prefixwas learnt with a signalling type different from what was learnt initially. We do not allow both types of signalling for nets with the same RD

Recommended Action    This msg is info only. Need to check L2VPN Configuration in the topology across all PEs.

Error Message     
 
    
    
   

%ROUTING-BGP-4-L2VPN_SIGNALLING_MISMATCH Ignored import operation for Net received for L2 table [chars]

Explanation    The import operations will not be done for nets whose signalling type does not match that for the importing VRF. The import operation has been ignored.

Recommended Action    Check the topology to make sure that tow differently signalled vrfs are using different Signalling types.

Error Message     
 
    
    
   

%ROUTING-BGP-4-LOCK_ORDER Locking order violation (thread [unsigned int]): [chars] gained while holding: [chars]

Explanation    BGP detected a violation of lock ordering requirements

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-LOCK_RELEASE Lock released without being held (thread [unsigned int]): [chars] gained [unsigned int], released [unsigned int]

Explanation    BGP detected a lock being released when it was not held.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-MAXPFXEXCEED No. of [chars] prefixes received from [chars]: [unsigned int] exceed limit [unsigned int]

Explanation    Number of prefixes received from a neighbor for a given address family has exceeded the limit configured with the 'max-prefix' command.

Recommended Action    Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.

Error Message     
 
    
    
   

%ROUTING-BGP-4-MISSING_SUBGRP Detected missing neighbor AF sub-grp. Correcting: [chars]

Explanation    BGP detected that a Neighbor AF did not correctly belong to an update sub-group. BGP attempted to correct this error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-NBR_DOUBLE_ADD_SCOPED_ILIST Nbr [chars] (state: [unsigned int]) is on Active scoped ilist already

Explanation    An attempt to add nbr to active scoped ilist while it is on the ilist already

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-4-NSR_UNRECOGNIZED_PATH_INFO Path with uncrecongnized flags synced for net [chars] path id [unsigned int] version [unsigned int] flags [hex]

Explanation    A path with unrecognized flags is synced to standby.during NSR sync for a net. This may result in inconsistent state between active and standby BGP which can impact operation after Failover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-OVERSIZED_UPDATE There was and attempt to generate an oversized update message when advertising prefix [chars] in table [chars] / update-group [chars] / sub-group [chars]. Message details: total size [unsigned int], attributes size [unsigned int], NLRI size [unsigned int]

Explanation    An attempt was made to allocate an oversized message during update generation. This is usually due to the presence of large sized attributes for one or more prefixes. When such an error encountered, a Withdraw message is generated for the prefix under consideration.

Recommended Action    Please check the attributes of the prefixes in the afore mentioned table.

Error Message     
 
    
    
   

%ROUTING-BGP-4-PATH_ELEM_LIMIT Reached the maximum limit ([unsigned int]) of path elements of network [chars] for [chars] address-family

Explanation    An attempt was made to create a path element beyond the maximum limit. The advertisement and installation of the network in the BGP table may be inconsistent with additional-paths configuration.

Recommended Action    Revisit additional-paths configuration and the total number of paths learnt for a particular network.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_COMMUNITY_OVERFLOW Community overflow from policy application

Explanation    Policy tried to add more communities than a BGP route can hold.

Recommended Action    Find the affected neighbor with 'show bgp community truncated'. Modify policy on the affected neighbor to delete unnecessary communities.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_EBGP [chars] operations in [chars] [chars] policy [chars] will be ignored for external neighbor/update-group [chars]

Explanation    A policy attached to an eBGP neighbor performs operations that are illegal for eBGP routes, such as modifying the local-preference.

Recommended Action    Modify the policy to avoid the prohibited operations.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_IBGP [chars] operations in [chars] [chars] policy [chars] will be ignored for internal neighbor/update-group [chars]

Explanation    A policy attached to an iBGP neighbor performs operations that are illegal for iBGP routes, such as modifying the AS-path or MED.

Recommended Action    Modify the policy to avoid the prohibited operations.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_NHOP_WRONGAFI The policy '[chars]' attempted to set a next-hop on [chars] with an unsuitable address type. The next-hop will not be modified.

Explanation    The specified route-policy (or a policy applied by that policy) is configured - perhaps on a neighbor or for redistribution - and it is attempting to set the next-hop of the specified route to an address that doesn't match the address-family of the route. For example, it might be setting an IPv6 next-hop on an IPv4 route. Since this does not make any sense, the attempt will be ignored, and the next-hop will not be changed. (Note that this message is rate-limited, so it will not appear for every single route that is affected). Use the command 'show rpl policy name attachpoints' to determine where this policy is in use. Use the command 'show rpl policy name uses policies' to determine which other policies this policy applies (since the relevant 'set next-hop' may be in one of these policies).

Recommended Action    Modify the policy so that it sets a next-hop that matches the type of route it is modifying.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POTENTIAL_DEADLOCK Potential for deadlock detected: Locks: [chars]

Explanation    BGP detected the potential for a deadlock to occur. The process will be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-RIB_REG_FAIL Failed to register BGP protocol with RIB for [chars]: [chars] (error code: [hex])

Explanation    This trcaeback indicates that BGP lost connection to RIB and an one attempt to reconnect to RIB failed. This is expected in the following situations 1) Before FO, the standby BGP connects to the active RIB. after FO, the new active BGP has to connect to the new active RIB although it is not restarted. 2) After FO, the new active RIB is restarted due to process placement especially in muli-chassis scenario. 3) RIB restarted either due to an unplanned exit or due to user initiated restart Since BGP doesn't restart, it tries to connect to RIB right away and there is the possibility that the LWM channels may not have been published by RIB yet or RIB is unable to accept the connection due to heavy CPU churn (especially after FO). In all such cases, BGP will continue to try the connection to RIB. One can verify whether the connection has gone through or not checking the RIB clients. The ultimate verification would be to make sure that the RIB tables are in sync with the BGP tables and there is no traffic drop. There is always a very small possibility that this is due to a problem in the connection logic. So if the RIB tables are not in sync with the BGP tables, the traceback decode helps in figuring out the code-path and possible source of any problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-SAME_RD_SET Ignored import policy set operation for same RD import on [chars] path received from [chars]

Explanation    The import policy must not perform set operations on paths, received from a PE neighbor, whose RD is the same as the RD for the importing VRF. The set operation has been ignored.

Recommended Action    Modify the import policy so that it does not perform the set operation, or use globally unique RDs for VRFs.

Error Message     
 
    
    
   

%ROUTING-BGP-4-SLOW_FEEDBACK slow feedback from RIB for AFI [unsigned int], fwdtable_version [unsigned int], acked_fwdtable_version [unsigned int], slow ack count [unsigned int]

Explanation    This message indicates that BGP has detected a condition of slow feedback from RIB. The system will recover by itself.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-4-SPKR_RUNNING BGP AS number has changed from [chars] to [chars] - bgp (speaker) process will be restarted.

Explanation    The bpm process was terminated improperly and the speaker process did not receive the notification to terminate. A new bpm process has started with a different AS number due to a new bgp configuration while the speaker process is still running with the previous AS number.

Recommended Action    The speaker will be restarted to handle this error. No further corrective action is necessary. However, please contact your Cisco technical support representative to report this error.

Error Message     
 
    
    
   

%ROUTING-BGP-4-TABLE_DELINK Deleting table_ctx: [chars] in ACTIVE state

Explanation    BGP detected that a table_ctx is being deleted even though it is in active state

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-UNKNOWN_ACL Unknown ACL action: [unsigned int]

Explanation    BGP received an unknown action (permit/deny/etc) from the ACL library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-UPD_MSG_ALLOC_FAIL There was a failure to allocate a message buffer during update generation for Table [chars] / update-group [chars] / sub-group [chars]. Message details: type [unsigned int], update type [unsigned int], size [unsigned int], attribute size [unsigned int], Nexthop length [unsigned int]

Explanation    An error was encountered when allocating update message buffer. Update generation for the affected update-group will be retried after some time and will recover when the memory condition improves.

Recommended Action    Please check the memory state on the router. Please also consider tuning the update limit parameters using 'update limit ...' command.

Error Message     
 
    
    
   

%ROUTING-BGP-4-WRITE_SOCKET Writing to Socket Failed: [chars]

Explanation    BGP detected that a socket write failed This happens in the standby.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ADJCHANGE neighbor [chars] [chars]

Explanation    A BGP neighbor has either come up or gone down. This message appears only if the bgp log neighbor changes command is configured for the BGP process.

Recommended Action    This informational message normally appears as routers and BGP neighbors go up or down. However, unexpected neighbor loss might indicate high error rates or high packet loss in the network and should be investigated.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ADJCHANGE_DETAIL neighbor [chars] [chars]

Explanation    A BGP neighbor has either come up or gone down. This message appears only if the bgp log neighbor changes detail command is configured for the BGP process. This is the detailed variant of the neighbor state change message. Included in this message is a list of AFI/SAFI which were advertized (supported) by each end of the session and are common to both. The AFI/SAFI values are defined in RFC 1700, RFC 4760.

Recommended Action    This informational message normally appears as routers and BGP neighbors go up or down. However, unexpected neighbor loss might indicate high error rates or high packet loss in the network and should be investigated.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ASYNC_IPC_STATUS [chars]%s:([chars])inst-id [unsigned int], [chars]

Explanation    This notice message indicates that the BGP async ipc operation has an important status change, such as connection is up or down, or the instance has received all the initial configurations from BPM.

Recommended Action    This is in most cases informational only, and are part of the normal operation such as process is up, or RP switched over, etc. But this message can also be used to assist debugging bgp configuration related async ipc issues.

Error Message     
 
    
    
   

%ROUTING-BGP-5-BPM_ROUTER_ID No router ID available. Cannot connect to neighbors (retry in [unsigned int] seconds)

Explanation    IPARM returned no valid router ID. This is due to lack of a global router ID or a loopback interface.

Recommended Action    Try one of the following: 1) Set up a BGP router ID via the `bgp router-id' command in the `router bgp' configuration mode, or 2) Set up a global router ID via the `router-id' command in the global configuration mode, or 3) Set up a loopback interface with an IPv4 address.

Error Message     
 
    
    
   

%ROUTING-BGP-5-IO_INITSYNC_FAILED [chars] - set id [hex]

Explanation    A problem occurred in TCP sync, retry TCP sync.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-5-LOWMEM_RESET neighbor [chars] reset due to SEVERE low memory condition - use 'clear bgp [chars]' to re-enable

Explanation    A SEVERE low memory condition has been encountered on the node where the BGP process is running, and so to free some memory, BGP has reset a neighbor. BGP will continue to reset neighbors periodically until the low memory condition abates. The neighbors which are reset will be shut down until a 'clear bgp' command is used to bring them back up. They will not come up automatically when the low memory condition abates - this is to prevent the node oscillating between memory states.

Recommended Action    Free some memory on the system or correct the condition causing the low memory problem, and then use the 'clear bgp address' command to re-enable the neighbors that have been shut down. The 'show bgp all all summary' command can be used to easily see which neighbors are affected.

Error Message     
 
    
    
   

%ROUTING-BGP-5-LOWMEM_SHUTDOWN BGP is shutting down due to [chars] low memory condition - use 'process restart bgp location node' to restart

Explanation    BGP received a notification that CRITICAL low memory state has been entered, or that SEVERE low memory state has been entered while BGP is in READ-ONLY mode, and consequently it has shut itself down in order to free memory.

Recommended Action    Check the memory on the node, and take steps to free memory or to correct the condition which caused the low memory state. Then restart the process using the 'process restart bgp location node' command.

Error Message     
 
    
    
   

%ROUTING-BGP-5-MAXPFX No. of [chars] prefixes received from [chars] has reached [unsigned int], max [unsigned int]

Explanation    Number of prefixes received from a neighbor for a given address family has reached the warning level configured with the 'max-prefix' command.

Recommended Action    Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.

Error Message     
 
    
    
   

%ROUTING-BGP-5-NBR_NSR_DISABLED_STANDBY NSR disabled on neighbor [chars] on standby due to [chars]

Explanation    A BGP neighbor has NSR disabled on standby temporarily due to transport issues.

Recommended Action    This informational message normally appears as routers and BGP neighbors go down on standby if NSR is enabled and neighbor goes down because of session flap or the replicated session on standby get torn down.

Error Message     
 
    
    
   

%ROUTING-BGP-5-NSR_STATE_CHANGE Changed state to [chars]

Explanation    BGP changed its global NSR state.

Recommended Action    This informational message appears when BGP changes its global NSR state.

Error Message     
 
    
    
   

%ROUTING-BGP-5-POLICY_RESET Policy configuration change on neighbor [chars] requires HARD reset (clear bgp [chars]) to take effect.

Explanation    Automatic soft reset on policy change is not possible as the neighbor does not support ROUTE_REFRESH and 'soft-reconfiguration inbound' is not configured.

Recommended Action    Manually clear affected peer at earliest convenience, in order for policy change to take effect.

Error Message     
 
    
    
   

%ROUTING-BGP-5-RCVD_NOTIF_BADHOLDTIME [chars]

Explanation    A BGP notification message of unacceptable hold time has been received.

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ROUTER_ID_CONFLICT Router-id config (inst equals [chars], vrf equals [chars], rtrid equals [chars]) cannot be the same as IPARM's default router-id.

Explanation    This informational message appears as user-configured router-id is the same as IPARM's default router id. User should change the router-id.

Recommended Action    User should change the router-id.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ROUTER_ID_CONFLICT2 Default BGP instance cannot use IPARM's default router-id ([chars]) as its router id since it is used by another BGP instance already.

Explanation    This informational message appears as user-configured router-id of another BGP instance is the same as IPARM's default router id. User should change the router-id.

Recommended Action    User should change the router-id.

Error Message     
 
    
    
   

%ROUTING-BGP-5-RPKI_ADJCHANGE [chars] [chars] [chars]

Explanation    An RPKI cache has either come up or gone down.

Recommended Action    This message is informational.

Error Message     
 
    
    
   

%ROUTING-BGP-5-SENT_NOTIF_BADHOLDTIME [chars]

Explanation    A BGP notification message of unacceptable hold time has been sent.

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-5-TBLATTR_UNLOCK_MISMATCH_TBLCTX Wrong table context ([chars], [pointer]) is passed in for table attr [pointer] unlock - correct table context [chars] ([pointer])

Explanation    A warning was encountered during some operation for tblattr for a table context. The table context passed in is not same as the table context under which the tblattr is created. Normally this message will not cause any issue. In rarely case it might. The message is added for debug purpose only to help the DE to find such cases.

Recommended Action    Please include the output of the following commands: - show logging - show dll jobid bgp jobid - get bgp running core file. - show bgp trace

Error Message     
 
    
    
   

%ROUTING-BGP-5-TUN_NULL_IFHANDLE Local tunnel update: remote tunnel route for [chars], ifhandle is NULL

Explanation    This informational message appears as ifhandle of local tunnel route is NULL. Interface must be down. It should not be NULL if interface is up.

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-5-TUN_NULL_IFHANDLE2 Remote tunnel route [chars]%s ifhandle is NULL

Explanation    This informational message appears as ifhandle of remote tunnel route is NULL. Interface must be down. It should not be NULL if interface is up.

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-5-UPDATE_FILTERED One or more attributes were filtered from UPDATE message received from neighbor [chars] (VRF: [chars]) - message length [unsigned int] bytes, action taken [chars]. Filtering details: [chars]. NLRIs: [[chars]][chars]%s

Explanation    This message indicates that the UPDATE message contained one or more attributes that were filtered based on user configuration. One of the following actions has been taken: discard the attribute, or treat the UPDATE as withdraw.

Recommended Action    The filtered UPDATE messages are available in 'show bgp update in filter'; they should be decoded and analyzed.

Error Message     
 
    
    
   

%ROUTING-BGP-6-NBR_NOPOLICY No [chars] [chars] policy is configured for eBGP neighbor [chars]. No [chars] prefixes will be [chars] the neighbor until [chars] policy is configured.

Explanation    No routing policy has been configured for the specified eBGP neighbor in the given direction (inbound or outbound) for the address family named. To avoid unintended routing effects, no prefixes will be accepted in that direction until some policy is configured. 'Policy' can be a route-policy, or (for inbound policy) it can be a prefix list.

Recommended Action    Configure a route-policy for the neighbor in the given direction. If the desired behavior is to accept/send all routes, the route-policy should contain the single statement 'pass'. If the desired behavior is not to accept/send any routes, the route-policy should contain the single statement 'drop'.

Error Message     
 
    
    
   

%ROUTING-BGP-6-NSR_RESTART NSR has been restarted - [chars]

Explanation    BGP has restarted NSR due to the reason shown. There is no impact on forwarding.

Recommended Action    This message is info only.

Error Message     
 
    
    
   

%ROUTING-BGP-6-UPD_FILTER_MSG_BUFFERS_RESIZE Neighbor update filter message buffers resizing will not take effect after filtering action has started. Current buffer size is [unsigned int] messages while newly configured buffer size is [unsigned int] messages for neighbor [chars]

Explanation    Currently resizing of update filter message buffers is not supported.

Recommended Action    Configure update filter message buffer size before the session comes up.

Error Message     
 
    
    
   

%ROUTING-BGP-6-UPD_GEN_RECOVERY Update generation has recovered from a previous throttle event for [chars] [chars] because the memory consumption ([unsigned int] bytes) decreased below the recovery threshold (upper limit is [unsigned int] bytes)

Explanation    Memory consumption for transient update messages has fallen below the recovery threshold for a given entity (Process or Address-family or Update sub-group). Update generation had been previously throttled for this entity and is now being recovered.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-6-UPD_GEN_THROTTLE Update generation has been throttled for [chars] [chars] because the memory consumption ([unsigned int] bytes) crossed the upper limit of [unsigned int] bytes

Explanation    Memory consumption for transient update messages has crossed the effective upper threshold for a given entity (Process or Address-family or Update sub-group). Hence update generation has been throttled. It will recover automatically when the messages are freed after sending them to the peers.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-6-UPD_LIMIT_ACCOUNTING Update limit accounting inconsistency. Details: [chars]

Explanation    An error was encountered when counting update messages. It is automatically corrected.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-BGP-6-WARNING_WRAPPER Warning: A call to [chars] failed unexpectedly: [chars]

Explanation    A function call failed unexpectedly - this is probably a system problem

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-7-BPM_CHKPT Failed to checkpoint allocation of [chars]([chars]) to speaker [unsigned int]

Explanation    The BPM failed to record the allocation in the checkpoint table. This could cause operational problems if the BPM is later restarted.

Recommended Action    No further action is necessary unless the BPM restarts. In that case, if problems are seen it may be necessary to deconfigure BGP completely and then reconfigure it.

Error Message     
 
    
    
   

%ROUTING-BGP-7-RIB_TABLE_INFO Unable to [chars] for [chars]. [chars] RIB table [hex]

Explanation    A warning was encountered during some operation for the specified address family and RIB table. This could be due a software timing issue, caused by configuration changes.

Recommended Action    This behaviour is expected, if the table has just been unconfigured. No action is needed unless there are any operational problems.

C12000_IPV4_MRIB Messages

Error Message     
 
    
    
   

%ROUTING-C12000_IPV4_MRIB-3-INIT_ERROR Process initialization failed: ([chars]%s)

Explanation    MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

C12K_MCAST_GTRIE Messages

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_GTRIE-3-ERROR [chars] - [chars]

Explanation    'development message'

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_GTRIE-3-INIT_ERR [chars] - [chars]

Explanation    'development message'

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_GTRIE-7-DEV_MSG [chars]

Explanation    'development message'

Recommended Action    *SUPPORT*

C12K_MCAST_MDT_EA Messages

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_MDT_EA-3-CONN_ERR Thread connection failed: ([chars]%s)

Explanation    The linecard MDT EA thread failed to connect its to the route processor processes during process initialization. The MDT EA process thread handles MDT tunnel interface information between the route processor and the linecard hardware drivers. If the MDT EA fails to connect, no MDT tunnel interfaces can be created or deleted on the line cards. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    *SUPPORT

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_MDT_EA-3-THREAD_ERR [chars]%s

Explanation    The linecard MDT EA thread failed during platform lib init. The MDT EA process thread handles MDT tunnel interface information between the route processor and the linecard hardware drivers. If the MDT EA fails , no MDT tunnel interfaces can be created or deleted on the line cards. %s - pthread library call failure. %s - is the decoded error reason.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST_MDT_EA-7-CHINOOK_DEV [chars]

Explanation    'A software exception occurred during the initialization of the c12000 ' 'multicast library.'

Recommended Action    *SUPPORT*

C12K_MCAST Messages

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-2-FRAG_DROP [chars]

Explanation    'Fragmentation occurred in multicast fast path '

Recommended Action    'Please check outgoing interfaces' mtu of the stream displayed in the ' 'message.'

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-3-CLEANUP_WARN [chars] - [chars] ([hex])

Explanation    'A software exception occurred during the cleanup of the platform ' 'multicast library. This is not a service impacting error, but ' 'might result into memory leak.'

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-3-IMC_ERR [chars] - [chars]

Explanation    'A software exception occurred during interaction with Interface Manager ' 'process. This could be due to low memory'

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements are not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-3-INIT_ERR [chars] - [chars]

Explanation    'A software exception occurred resulting in the failure of platform ' 'multicast library initialization.'

Recommended Action    'The caller or platform independent module might retry the initialization. ' 'If not, then restart this process.' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-3-INIT_WARN [chars] - [chars] ([hex])

Explanation    'A software exception occurred during the initialization of the platform ' 'multicast library. This is not a major service impacting issue. It ' 'impacts just that functional module as mentioned in the error.'

Recommended Action    'If the specified module need to be functionalised, then ' 'reload the LC.' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-C12K_MCAST-4-ANOMALY [chars]

Explanation    'A software exception occurred in platform multicast library'

Recommended Action    *SUPPORT*

CLNS Messages

Error Message     
 
    
    
   

%ROUTING-CLNS-2-LC_INPUT Unexpected packet num [unsigned int] received on the LC

Explanation    CLNS on the LC doesnot process any packet. It will ignore any packets it receives on the LC.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ASYNC_ATTACH Failed to setup ingress packet handler for NetIO: [chars]

Explanation    CLNS encounted errors when initializing its connection with NetIO.

Recommended Action    CLNS will restart and try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-BUNDLE_FSV_REGISTER_FAIL CLNS failed to register with packet process for bundle FSV area: [chars]

Explanation    CLNS failed to register with packet manager for FSV area. It only affects the algorithm used to pick a bundle member. If no bundles are configured for ISIS - this error can be ignored.

Recommended Action    If the error was seen when a packet process is restarting, then restarting NetIO will help recover from it {or} b If the error is seen in normal conditions it indicates that packet process for some reason is not able to handle the FSV registration request. Please collect the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show tech-support pfi all show process packet location show process netio location show logging

Error Message     
 
    
    
   

%ROUTING-CLNS-3-CONFIG_INIT Cannot initialize CLNS configuration: [chars]

Explanation    CLNS could not initialize its configuration mechanism, and all future CLNS configuration will fail.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-CONN_OPEN Failed to open connection for [chars]: [chars]

Explanation    CLNS encounted errors when opening its connection with the process mentioned in the message. CLNS will reattempt the connection by restarting.

Recommended Action    CLNS will restart and try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-DETACH Socket closing on interface [chars] failed: [chars]

Explanation    The socket cannot remove an interface when closing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-DLL_REGISTER Registration for '[chars]' failed: [chars]

Explanation    Some internal initializations fail miserably!

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_CLIENT Error during operation '[chars]': [chars]

Explanation    CLNS EDN client (usually a show command) failled to perform certain operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_ENCODE_FAILED Bad encoding failed for [chars]: [chars]

Explanation    CLNS failed encode a bag for EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_INIT Operation '[chars]' during EDM initialization failed: [chars]

Explanation    CLNS show command failed to initialyze the EDM server. 'show' command will likely fail, although CLNS should be able to operate.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DEBUG_PACKET_INIT CLNS NetIO packet debugging failed to initialize.

Explanation    CLNS failed to initialize packet debugging functions.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DEBUG_RETRIES_EXCEEDED Stopping CLNS debug initialization attempts after [unsigned int] tries

Explanation    CLNS tried to initialize packet debugging functions but was unable to succeed even after a number of attempts. No more attempts will be made.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DROP_PKT [chars]. Dropping packet

Explanation    CLNS encountered an internal error while trying to process a packet (usually for output). As a result CLNS dropped the packet.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_INTERFACE_DATA CLNS was unable to resolve an interface while installing cap/decap chain.

Explanation    CLNS was unable to look up local interface information. As a result the system may not be able to send/receive ISIS packets over this interface. This may be due to problems with either CLNS or the forwarding infrastructure.

Recommended Action    Restarting the CLNS process may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_MEDIA_REGISTER CLNS failed to register media callback with netio: [chars]([dec])

Explanation    CLNS failed to register for media callback with netio during initialization. As a result, CLNS will not be able to add its caps and wont receive or send packets. It's an internal error.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_NETIO_ENCAP_CALLBACK CLNS netio encap callback for media caps: [chars]([dec]) failed [chars]([dec])

Explanation    CLNS failed to setup encap callback with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_NETIO_SET_MAPPING CLNS netio set mapping for media caps: [chars]([dec]) failed [chars]([dec])

Explanation    CLNS failed to setup mapping with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_PARTNER_LOOKUP CLNS-NetIO partner lookup failed

Explanation    NetIO was unable to initialize the CLNS partner process. As a result the system will not be able to send/receive ISIS packets over interfaces on this line card.

Recommended Action    Restarting CLNS and/or NetIO may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERROR_INIT Cannot register CLNS error codes: [chars]

Explanation    CLNS could not initialize its error code. CLNS will work, but error messages won't be user friendly!

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ETHERENCAP Incorrect MAC address length [dec]

Explanation    The MAC address length provided for the ethernet encapsulation is wrong.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVENT_CONN_CREATE_FAIL Error creating '[chars]' connection: [chars]

Explanation    CLNS failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVENT_CONN_NOTIFY_FAIL Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, CLNS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVM_INIT Error while initializing the [chars]: [chars]

Explanation    An operation failed during the initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-GET_TRAFFIC Cannot get traffic information: [chars]

Explanation    CLNS show command failed to get the required information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-HSSD_REGISTER_FAIL CLNS failed to register for an HSSD area: [chars]

Explanation    CLNS failed to register for an HSSD area. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-INTERFACE Operation '[chars]' on CLNS interface [chars] failed: [chars]

Explanation    CLNS could not initialize its interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-L2INFO_LEN [chars] length is [dec], should be [dec]

Explanation    The length of the L2 data received is not what it should be.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_ADD_BINDING Couldn't add clns binding to lpts port arbitrator, error equals [chars]

Explanation    The clns process was unable to add a binding to LPTS. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_DELETE_BINDING Couldn't delete CLNS binding from Port Arbitrator, result equals [chars]

Explanation    The clns process was unable to delete a binding from LPTS. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_SETOPT Cannot set the LPTS option '[chars]': [chars]

Explanation    An operation failed during LPTS option setting.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-PAK Packet operation '[chars]' failed: [chars]

Explanation    An operation failed during packet handling.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-PAK_READ Failed to read data from packet area: [chars]

Explanation    The clns process was unable to read the input packet. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SEND_ASYNC CLNS was unable to wake itself up([dec]) for reading pending packets: [chars]

Explanation    CLNS is unable to wake up itself to read the pending ingress packets from NetIO. ISIS will not be able to receive these pending packets from CLNS.

Recommended Action    Restarting CLNS might help. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCK_INIT Socket initialisation task '[chars]' failed: [chars]

Explanation    An operation failed during socket initialisation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCK_SET_NAME Internal socket error on packet reception: [chars]

Explanation    An operation failed during packet reception.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCKET_PARSE_PATH error encountered when parsing path: [chars]

Explanation    CLNS was unable to extract the xipc & job id from the socket path. This might cause communication problems between ISIS and CLNS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCKET_RESMGR_ATTACH Failed to setup the clns socket as a resource manager: [chars]

Explanation    The clns process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-STATSD_INIT Cannot connect to the stats server: [chars]

Explanation    An operation failed during the Stats Server Connection opening.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-STATSD_REGISTER Cannot [chars] with the stats server for interface CH[hex] ([hex])

Explanation    An operation failed during the Stats Server Interface registration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-THREAD_CREATE Error starting thread for [chars] processing : [chars]

Explanation    CLNS failed to create the thread for the operation mentioned in the message. CLNS will try to recover by restarting.

Recommended Action    CLNS will try to recover by restarting. If it recovers no further action is needed. This error is not expected and very rare. It is usually seen when system resources like memory are very low. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-TIMESTAMP Operation '[chars]' failed during packet timestamping: [hex] ([chars])

Explanation    An operation failed during timestamp processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-BASE_CAPS_LU_FAIL IM base capsulation lookup for interface CH[hex] ([hex]) failed: [hex], '[chars]'

Explanation    The Interface Manager returned an unexpected error when CLNS attempted to lookup an interface's base capsulation type. This may be a resource problem but is probably an internal error.

Recommended Action    Consider restarting the CLNS and/or Interface Manager processes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-DEBUG_REGISTER_FAIL Failed to register with the debugging subsystem: [hex], '[chars]'

Explanation    CLNS failed to register with the debugging subsystem. If this message has been generated then CLNS debugging may not be available. This may be a system resource problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-ERR_CONN_SETRETRY Error setting the linear retry period for '[chars]': '[chars]'

Explanation    CLNS failed to set the linear retry period for connecting to sysdb. We set the retry period in order to avoid immediate reconnection attempt from clns to sysdb server when the latter restarts. This prevents clns from blocking on sysdb and cause any traffic drop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-ERR_IDB_LOOKUP_DROP_PKT [chars]: Netio IDB not found for interface CH[hex] ([hex]), packet 0x[pointer] dropped

Explanation    CLNS was unable to find the NetIO IDB for the interface handle in the message. If this is seen during NetIO restart, it could be transient condition that should recover once NetIO is back up with all the IDBs in steady state. If this is seen in steady state, the ISIS adjacency on this interface could be affected. *RECUR*

Recommended Action    If this message is seen during NetIO restarts and the message is seen only at that time, no further action is needed. If this message is seen during steady state more than once with the ISIS adjancency on this interface being affected, restarting netio process or improxy process might help in redownloading the IDBs to netio.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-GET_MCASTADDR_ERR Failed to get MAC address(im_attr_macaddr_get) for [chars]: [chars]

Explanation    The process failed to get MAC address from the interface. This can be caused by a faulty hardware.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_CRE_REG_FAIL CLNS interface registration failed for base cap type [chars]: [chars]

Explanation    CLNS process failed to register an interface with the Interface Manager. This is an internal error. It requires a restart of process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_SERV_BIND_FAIL Failed to bind to the Interface Manager: [dec]

Explanation    CLNS failed to bind to the Interface Manager control plane. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_SIGEVENT_FAIL IM control handler setup failed: [chars]

Explanation    CLNS failed to establish signal event in the Interface Manager control plane. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-MAC_SIZE_ERR Incorrect MAC address size for [chars] (returned: [dec], expected: [dec])

Explanation    MAC address size does not match IEEEBYTES (6 bytes). This can be caused by a faulty hardware.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-NETIO_OUTPUT_FAIL Failed to send packet 0x[pointer] to NetIO on interface CH[hex] ([hex]): [chars]

Explanation    CLNS was not able to send a packet to NetIO. This could be because of communication problems between CLNS and NetIO.

Recommended Action    If this message is seen during transient conditions, for example when NetIO is restarting either because of install operation OR because NetIO crashed then it is not harmful unless you see ISIS adjacencies dropping. If it is seen under steady state conditions OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-PAK_FROM_ISIS_FAIL Failed to process packet 0x[pointer] from ISIS: [chars] [chars]

Explanation    CLNS was not able to process a packet from ISIS successfully and hence dropped the packet.

Recommended Action    This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-PAK_FROM_NETIO_FAIL Failed to process packet 0x[pointer] from NetIO: [chars]:[chars]

Explanation    CLNS was not able to process a packet from NetIO successfully and hence dropped the packet.

Recommended Action    This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-SEND_HELLO_PDU_TO_ISIS_FAIL Failed to send Hello PDU(0x[pointer]) type [chars] ([hex]) from interface CH[hex]([hex]) to ISIS instance [chars]: [chars]

Explanation    CLNS was not able to send a hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.

Recommended Action    If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions OR adjacency flaps are seen on this interface OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-SEND_PDU_TO_ISIS_FAIL Failed to send PDU(0x[pointer]) type [chars] ([hex]) from interface CH[hex]([hex]) to ISIS instance [chars]: [chars]

Explanation    CLNS was not able to send non-Hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.

Recommended Action    If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-TRACE_INIT_FAIL Failed to init debug tracing support : [chars]

Explanation    CLNS failed to init with the ltrace subsystem. This affects the debuggability of the component. CLNS will attempt to restart to recover from the situtation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-UNKNOWN_MEDIA Unknown media ([dec]) on interface CH[hex] ([hex])

Explanation    The specified interface media is not supported by CLNS. This means that IS-IS and other CLNS protocols cannot run over the specified interface. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. As a workaround consider using a different encapsulation for the interface.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-CAPS_ADD_FAIL Failed to add CLNS encapsulation to interface CH[hex] ([hex]): [chars]

Explanation    CLNS failed to add caps to its encapsulation chain. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-CONN_PAK_AREA_FAIL CLNS failed to connect to packet area

Explanation    CLNS failed to connect to packet subsystem during initialization. As a result, CLNS will not be able to receive or send packets. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-DEBUG_THREAD_CREATE Error starting thread for debug registration: [dec]

Explanation    CLNS failed to create the thread for debug registration and to handle debug events. Thus, causing unavailability of debugs. But CLNS should continue with the normal functionality, so the process should not exit even if this thread is not created.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-ERR_L2_HASH CLNS failed to initialize the L2 hash function: [chars]

Explanation    CLNS failed to initialize the L2 hash function. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-ERR_STACKMEM Could not alloca [dec] bytes

Explanation    CLNS failed to allocate stack memory space.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-IM_ATTR_REG_FAIL Failed to register for notification of MAC address: [chars]

Explanation    An error was discovered during the Interface Manager MAC address registration. It requires a restart of process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DAD Messages

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_EVM_ASYNC_ATTACH Unable to listen for events because: [chars]

Explanation    A failure occured while trying to setup the event listen structure for package un-installs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_BIND Sysdb bind operation failed because: [chars]

Explanation    The bind operation has failed for the above reason. This is something that should not occur under normal operations.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_DELETE Sysdb delete operation failed because: [chars]

Explanation    The DAD library attempts to delete the old protocol information before writing out the new information. This delete operation failed for the above reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_SET The writing of sysdb information failed because: [chars]

Explanation    The DAD library encountered an error while writing out the policy information for the above reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_AVAILABLE Unable to declare proc available because: [chars]

Explanation    A failure occured while trying to tell sysmgr that we are available for availability.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_CLEANUP Unable to listen for cleanup notices because: [chars]

Explanation    A failure occured while trying to ask sysmgr for cleanup events for package un-installs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_READY Unable to declare proc ready because: [chars]

Explanation    A failure occured while trying to tell sysmgr that we are ready for processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-7-SETUP Invalid setup at [chars]@[dec]: [chars]

Explanation    There was something illegal about the setup operations that where performed. This should be a straight coding error that will fail everytime and should be cleaned up before releasing the code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EC_TRACE Messages

Error Message     
 
    
    
   

%ROUTING-EC_TRACE-3-GEN_ERR [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EIGRP_POLICY Messages

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_INSTBUILD Failed to build [chars]: [chars] ([chars])

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_ORABUILD Failed to build ORA[chars]: [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EIGRP Messages

Error Message     
 
    
    
   

%ROUTING-EIGRP-2-ERR_MEM_ALLOC [chars] [dec]: Could not allocate memory for [chars]

Explanation    There is not enough memory available for the EIGRP process.

Recommended Action    This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-ANCHORCOUNT [chars] [dec]: Anchor count negative

Explanation    Internal error in the flow control module in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-BADCOUNT Invalid path count for route [chars], [dec] successors, [dec] paths

Explanation    A bad reference count has been detected while adding a path for a prefix.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-ERR_NO_ENCODER_DECODER [chars]: No [chars] registered for [chars] [chars] (version: [unsigned int])

Explanation    EIGRP could not find an encoder/decoder to be used to transmit/receive packets.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-INTERNAL [chars] [dec]: [chars]

Explanation    An internal error occured in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-MULTIFLOW Flow control error, [chars], on [chars]

Explanation    Error in the flow control algorithm in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-NO_REDISTMETRIC [chars]: No metric set while redistributing route [chars]/[dec]

Explanation    Metric is not configured during redistribution.

Recommended Action    Configure the metric needed for redistribution using default-metric or route policies.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-NOBUFFER No buffers available for [unsigned int] byte packet

Explanation    EIGRP could not allocate a packet buffer to transmitting a packet.

Recommended Action    The number of packet buffers available for transmitting EIGRP packets is low. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PAK_WRITE Failed to construct packet to send on [chars]. [chars]

Explanation    Error in constructing a packet, to be transmitted by EIGRP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PEERSEXIST [dec] peers exist on [chars]

Explanation    One or more peers exist on an interface which is being deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PFXLIMIT [chars] [dec]: [chars] prefix limit reached

Explanation    'Number of prefixes for eigrp has reached the configured ' 'or default limit.'

Recommended Action    'Use 'show ip eigrp accounting' for details on the source ' 'of the prefixes and take corrective measures.'

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-RDBLEFT Interface removed, but route [chars], nexthop [chars] ([chars]), origin [chars], has path

Explanation    Routes exist over an interface being deactivated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-REFCOUNT Negative refcount in packet descriptor 0x[pointer]

Explanation    Internal reference count error in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-SIA Route [chars] stuck-in-active state in instance [dec]. Cleaning up

Explanation    Neighborship was reset to the specified peer, due to a prefix being in stuck-in-active state.

Recommended Action    Verify that there are no packet drops between the neighbors and the state of the EIGRP prefix in the neighbor. Clear the eigrp neighbor. If the CPU utilization by EIGRP remains high, restart the EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-UNKTIMER Unknown timer type [dec] expiration

Explanation    Unknown timer encountered in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-ERR_SOCKET Error [chars]setting [chars] option in [chars]

Explanation    EIGRP was unable to set the specified socket option on the specified interface or VRF.

Recommended Action    If the message persists, remove and readd the affected interface or VRF and if the problem still persists, restart EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-ISSU_SUPPORT [chars]

Explanation    ISSU in EIGRP works on top of NSF and GR. If NSF is disabled, during ISSU, EIGRP will not be able to retain the routes learnt from its peers and may result in traffic loss.

Recommended Action    If routes learnt by EIGRP needs to be retained during ISSU, enable NSF using 'no nsf disable'.

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-PFXLIMITTHR [chars] [dec]: [chars] threshold prefix level reached

Explanation    'Number of prefixes in the topology database has reached ' 'the configured or default threshold level.'

Recommended Action    'Take preventive action by identifying the source of ' 'the prefixes. Use 'show ip eigrp accounting' ' 'for details.'

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-WARNING [chars]

Explanation    There is a subnet mismatch between eigrp neighbors.

Recommended Action    Verify the primary IPv4 address on both ends of the specified interface.

Error Message     
 
    
    
   

%ROUTING-EIGRP-5-NBRCHANGE [chars] [dec]: Neighbor [chars] ([chars]) is [chars]: [chars]

Explanation    An EIGRP neighbor has gone UP or DOWN.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-EIGRP-6-EVENT [chars], [chars]

Explanation    An EIGRP event logged into the trace buffer.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-EIGRP-6-PAK_SEND Failed to send packet on [chars]. [chars]

Explanation    Failed to send a packet from EIGRP.

Recommended Action    This can happen if other processes involved in packet forwarding are restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ENXR_MRIB Messages

Error Message     
 
    
    
   

%ROUTING-ENXR_MRIB-3-IFH_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ENXR_MRIB-3-INIT_ERROR Process initialization failed: ([chars]%s)

Explanation    MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EVENT Messages

Error Message     
 
    
    
   

%ROUTING-EVENT-3-ERR_MEM_ALLOC No memory, [chars]: [chars]

Explanation    Allocation of the specified resource failed because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

FIB_ForUs Messages

Error Message     
 
    
    
   

%ROUTING-FIB_ForUs-3-LIB_DEBUG_INIT The ForUs client library debug failed to initialize, event: [chars], error: [chars]

Explanation    Initialization of debugging in the ForUs client library failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB Messages

Error Message     
 
    
    
   

%ROUTING-FIB-1-FIBALLOC [chars]: [chars]

Explanation    The CEF system could not allocate the data structures needed to initialize a new forwarding table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-1-FIBTBLINIT CEF table creation failure, id:[dec] [chars]

Explanation    An internal software error occurred that prevented the creation of a new forwarding table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-BGP_ATTR_INSERT_DROP Attribute [hex] insert failed [hex], [chars].

Explanation    FIB is dropping this attribute due to error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-IFH_RECYCLE_CLEANUP_EXT_FAIL IFH-RECYCLE: Cleanup of quarantined idb extension failed. Encoded info: IDB_ext:(0x[pointer]) Proto:([chars]) Interface:([hex]). Flags:([hex]), Ref_count:([dec]), NH_count:([dec]), Glean_nhinfo:(0x[pointer]). Detailed info dump at: [chars]

Explanation    FIB (CEF) failed to cleanup an IDB on detecting interface handle recycle to a new interface. Some of the routes may be in incorrect state and may affect traffic forwarding for those routes. There is no self recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-INIT FIB initialization failed on this node. Reason: [chars]. Decoded error reason: [chars]

Explanation    FIB (CEF) initialization has failed due to the reason indicated in the message. The process shall attempt self recovery by restarting. Without FIB aka CEF up, forwarding shall be impacted on the setup.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-INVALID_MSG FIB thread [chars], received an invalid message. Decoded error reason: [chars]. Encoded return value:([unsigned int])

Explanation    FIB (CEF) thread got an invalid message, indicating unexpected behavior so it is exiting. The process shall attempt self recovery by performing graceful restart, where in the FIB shared memory shall be intact. Without FIB aka CEF up, forwarding shall be impacted on the setup.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEM_ROUTEDROP_ADDMODIFY Dropping add/modify route [chars]/[unsigned int] msg due to low memory.

Explanation    FIB is not adding or modifying this route due to a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEM_ROUTEDROP_DEL Dropping delete route [chars]/[unsigned int] msg due to low memory.

Explanation    FIB is not deleting this route due to a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEMINFO_ROUTEDROP Dropping route [chars]/[unsigned int] due to no knowlege of memory available. err [hex], [chars].

Explanation    FIB is dropping this route because it is unable to find the memory available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEMINFO_SHMERR Dropping routes due to no knowlege of memory available. err [hex], [chars].

Explanation    FIB is dropping this route because it is unable to find the memory available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-OOR CEF has run out of [chars] resource memory. No more route updates will be handled by CEF. Please delete routes, and then clear CEF on this node to resume normal operation.

Explanation    The fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted and customer does a clear cef on the node.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Significant routes will have to be deleted followed by a clear cef on the affected node to resume normal cef operation.

Error Message     
 
    
    
   

%ROUTING-FIB-2-OOR_TBL CEF has run out of table resource memory. This table [hex] could not be created. Please check the memory on the card and then recreate/reconfigure the table when enough memory is available.

Explanation    The fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes/tables are deleted and customer does a recreate of the table.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Significant routes/tables will have to be deleted followed by a reconfiguration of the table.

Error Message     
 
    
    
   

%ROUTING-FIB-2-PROTO_INIT FIB protocol [chars], initialization failed. Reason: [chars]. Decoded error reason: [chars]. Encoded return value:([unsigned int])

Explanation    FIB (CEF) initialization has failed due to one of its protocol, indicated in the message, encountered a failure as indicated in the message. The process shall attempt self recovery by restarting. Without FIB aka CEF up, forwarding shall be impacted on the setup.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-ROUTEDROP_UPD Dropping route update to [chars]/[unsigned int] path [dec] interface [hex]

Explanation    FIB is not processing this route update due to internal error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-STATE FIB startup failed at state: [chars]. Decoded error reason: [chars]. Encoded return value:([unsigned int])

Explanation    FIB (CEF) initialization has entered into an incorrect state. The process shall attempt self recovery by restarting. Without FIB aka CEF up, forwarding shall be impacted on the setup.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-THREAD_INIT FIB thread [chars], initialization failed. Reason: [chars]. Decoded error reason: [chars]. Encoded return value:([unsigned int])

Explanation    FIB (CEF) initialization has failed due as a result of one of its threads encountering failure. The reason for which is indicated in the message. The process shall attempt self recovery by restarting. Without FIB aka CEF up, forwarding shall be impacted on the setup.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ADD CEF : fail to add route for [chars] [unsigned int]

Explanation    CEF fails to add a prefix entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ADJ_INIT FIB initialization with the AIB failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with AIB.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR can be tried as well.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ATTRIBUTE Attribute operation failed during [chars]: for [chars] ([dec], [chars])

Explanation    An internal software error occurred that prevented the FIB from working with attributes.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%ROUTING-FIB-3-BCDL BCDL failed during [chars] for group [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with BCDL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-BCDL BCDL failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with BCDL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-CFGREG Config registration error: [chars] [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.*

Error Message     
 
    
    
   

%ROUTING-FIB-3-CLIENT CEF CLIENT: [chars] [chars]

Explanation    CEF client internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-CLIENT_ERROR [chars] [chars]

Explanation    A FIB client behaved erroneously or there was an unexpected state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-DEFAULT_ROUTE_CREATE_FAIL Default route creation failed [chars]

Explanation    A route update was skipped because of an internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-DELETE CEF : fail to delete route for [chars] [unsigned int]

Explanation    CEF fails to delete a prefix entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-DUMMY_ZERO_ERR Error while attempting to restore dummy real zero: [hex] [chars]

Explanation    Cannot restore the dummy real zero route to its original state

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-DUMMY_ZERO_REMOVE Removing ing dummy real zero because of error: [hex] [chars]

Explanation    Forced to delete because cannot restore the dummy real zero because of error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-FIBGTRIEINIT Gtrie initialization default value failed, [chars] [chars]

Explanation    An internal software error occurred that prevented the FIB subsystem from starting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-GEN_ERR FIB internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-GTRIE GTRIE failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with the tries.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%ROUTING-FIB-3-GTRIE_DEL Gtrie delete failed, [chars]/[unsigned int] (Err: [hex], [chars])

Explanation    An internal software error occurred that prevented the FIB subsystem from removing a route

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-IDB IDB operation for ifh:[hex] failed during [chars]: ([dec], [chars])

Explanation    An internal software error occurred for an IDB action.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%ROUTING-FIB-3-INIT_GR_EXIT_TOUT Timed-out on graceful exit for init failure, exiting ungracefully

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-INTERNAL_ERR An internal processing error/illegal state detected: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-INVALID_BGP_PATH_FLAGS Received Invalid path flags from BGP: [hex], PL: 0x[pointer]

Explanation    Received an invalid combination of BGP path flags

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-LEAF_DEPEND_CLEANUP_ERR LEAF-DEL-ERR: All dependents of leaf [pointer] did not unlink, leaf-ref-count:[dec] first-dep:[pointer]

Explanation    This is an unexpected state where after leaf deletion, leaf still has some dependent paths pointing to it. This could prevent the leaf from getting freed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-MALLOC_FAILED Heap memory allocation failed from - '[chars]'

Explanation    FIB couldn't allocate memory for some internal processing. It might be in consistent state.

Recommended Action    Check memory utilization on the card the error came for and take appropriate steps to reduce it.

Error Message     
 
    
    
   

%ROUTING-FIB-3-NOMEM Malloc Failure, [chars]

Explanation    An internal software error ocurred. CEF switching disabled on this slot.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-NOTABLE Failed to find CEF forwarding table [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-PD_FAIL [chars]

Explanation    This is a catch all PD errors.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-PFI_FIB_IFTYPE_MISMATCH Mismatch in interface type [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-PFI_IFINFO CEF : [chars] ifh:[hex], if:CH[hex]

Explanation    CEF fails to connect or get information from pfi_ifh server,

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-PLATF_UPD_FAIL Platform upd failed: Obj equals [chars][ptr equals [pointer],refc equals [hex],flags equals [hex]] Action equals [chars] Proto equals [chars]. Cerr equals [chars]

Explanation    This is a catch all Platform update errors during development phase.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RCC CEF : rt_check_send_msg failed: [chars]

Explanation    CEF fails to send rcc error messages,

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RCC_NO_TABLE route check to the fib failed table [hex], protocol [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from completing the route check.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RCC_TABLE RCC failed finding [chars] table

Explanation    The Route Consistency Checker failed finding specified table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RECURSIVE_LOOP [chars]

Explanation    This is to catch recursive loops.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RETRY retry module failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from retrying a failed operation.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ROUTE route update for [chars] (table [hex]) to the fib failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with route updates.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ROUTE_GEN [chars]: [chars]

Explanation    An internal software error occurred during route handling.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RPCINIT Unable to initialize CEF RCP handler: [chars] program [dec] version [dec] protocol [dec]

Explanation    The CEF system could not initialize an RPC server and therefore cannot handle show and clear commands from the parser.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SERVER CEF SERVER: [chars] [hex]

Explanation    CEF server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SERVER_CERR CEF SERVER: [chars] [chars]

Explanation    CEF server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SHM shared memory failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with shared memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SHMEM Shared memory failure: error code [dec], [chars]

Explanation    An internal error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-TABLE table operation failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with multiple tables.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%ROUTING-FIB-3-TE_CREATE_ERR TE-CREATE-ERROR: [chars]

Explanation    An error occurred during TE programming

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-TE_DESTROY_ERR TE-DESTROY-ERROR: [chars]

Explanation    A te-tunnel created with DOWN backup was destroyed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-THREAD Thread processing error: [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-TIMER Timer module failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB handling timers.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%ROUTING-FIB-4-FIBIDB Missing cef idb for ifh:[hex], CH[hex], during [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-FIBIDB_LOOKUP_FAIL FIB idb lookup failed ifh [hex], if:CH[hex] [chars]: [hex], [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-HA [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-IDB_PLATF_UPDATE_TOO_LONG Platform update type - [chars] for interface [chars] (idb 0x[pointer], protocol [chars]) took too long - [dec] secs

Explanation    We don't expect platform updates to take too long. This can block other processes that need to communicate with fib_mgr, for instance, for config, etc.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-IM_CONN fail to connect to IM [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-IM_CONN fail to connect to IM [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-INIT IP CEF initialization failure: [chars]

Explanation    Initialization of CEF failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-LCL_ATTRIB_ENTER_OOR Proto:[chars], VRF:[chars], Local attribute index database max([dec]) reached. OOR state: red

Explanation    The local attribute index database on the LC has reached its max.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-LTRACE_ERR Failed to open trace file: [chars]

Explanation    The FIB process was unable to open the trace buffer for automatic tracing (show trace cef may not work).

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PFI_IFH_CONN fail to connect to PFI_IFH [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PFI_IFH_LOOKUP fail to lookup information in PFI_IFH [chars] for ifh [hex]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PL_FRR_LOOKUP_CREATE_FAILED Failed to create FRR state for proto [chars], interface CH[hex] (parent CH[hex]), nexthop [chars] - [chars]

Explanation    We don't expect this FRR state setup to fail. It can only happen under low memory or some unexpected conditions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PULSE_HNDLR FIB received unidentifiable pulse: proto [unsigned int], opc [unsigned int], [chars]

Explanation    FIB received a pulse that could not be identified.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-RADIXINIT Error initializing IP CEF radix tree

Explanation    Initialization of the radix tree could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-FIB-4-RSRC_LOW CEF running low on [chars] resource memory. CEF will now begin resource constrained forwarding. Only route deletes will be handled in this state, which may result in mismatch between RIB/CEF. Traffic loss on certain prefixes can be expected. CEF will automatically resume normal operation, once the resource utilization returns to normal level.

Explanation    The fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has enterred resource contrained forwarding mode. In this mode, the cef will only handle route deletes which may potentially freeup some memory. Due to this operational mode, the CEF/RIB will be out of sync. Once routes are deleted and resource utilization level drops to acceptable levels again, cef will come out of this operational mode and resume normal operation.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Any action that reduces number of routes for this protocol (results in route delete events to free up resources below predefined level) will eventually result in the cef returning to normal operation after few seconds.

Error Message     
 
    
    
   

%ROUTING-FIB-4-WARNING FIB internal error [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-5-ROUTE_UPDATE_DROP [chars]

Explanation    An internal software error occurred and FIB had to throw away a route update

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%ROUTING-FIB-6-DEBUG_REG IPV4-FIB: Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-FIB-6-DEPEND_UNBIND_FAILURE Unbind for object type [chars] failed from parent type [chars] - no unbind handler found

Explanation    FIB internal APIs need/expect an unbind handler, which wasn't found. This can lead to FIB not cleaning up state on interface delete events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-6-HARD_RESET [chars]

Explanation    FIB is restarting with a reset of it's shared memory to possibly recover from an unrecoverable state

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-FIB-6-LCL_ATTRIB_EXIT_OOR Proto:[chars], VRF:[chars], Local attribute index database OOR state: green. OOR local attribute count:[dec]

Explanation    The local attribute index database on the LC has resources available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-6-RSRC_OK CEF resource state has returned to normal. CEF has exited resource constrained operation and normal forwarding has been restored

Explanation    The fib_mgr process had previously detected that the hardware,software resources required for cef operation were running low, and had enterred resource constrained forwarding. Now resources have been restored and cef has resumed normal operation.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-FIB-6-SHMRESET_NON_RELOAD_SMU SMU installed will reset shared memory, which will impact traffic till fib_mgr initializes.

Explanation    SMU installed has been designed to cause SHM reset without having to reload the router. Till fib_mgr initializes there will be impact on traffic.

Recommended Action    None.

FWD_HA Messages

Error Message     
 
    
    
   

%ROUTING-FWD_HA-4-PROCESS_RESTART [chars] restart_count equals [dec] mode equals [dec] ([chars])

Explanation    The process is being restarted either because we failed to initialize or we finished resetting shared memory and we are starting fresh.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HFR_IPV4_MRIB Messages

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-CHKPT_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_ADD_ERR Failed to add LC [dec] into FGID [dec]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_ERR Failed to [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FGID_REMOVE_ERR Failed to remove LC [dec] from FGID [dec]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-FILE_OPEN_ERR Failed to open a file [chars] to dump the [chars] database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-IFH_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-IM_NAME_ERR im_interface_name error in function [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-INIT_ERR Failed to [chars]

Explanation    Init error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-INTERNAL_ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-INVALID_FGID_ERR Failed to [chars] : invalid fgid value [hex]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-MEM_ERR Failed to [chars] for [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-HFR_IPV4_MRIB-3-PERF_ERR Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IGMP_MTRACE Messages

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-EVENT_ERROR Event error: [chars] in [chars]

Explanation    Event error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-INIT_ERROR Init error: [chars]

Explanation    Initialisation error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-MEMORY_ERROR Memory error: [chars] in [chars]

Explanation    Memory error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-MSG_ERROR msg error: [chars] in [chars]

Explanation    Messaging error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-SOCKET_ERROR Socket error: [chars] in [chars] : [chars]

Explanation    Socket error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IGPTE_LIB Messages

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_BAG_REGISTER Error registering igpte-lib [chars] bags: [hex], '[chars]'

Explanation    IGP failed to register its bag files with the bag library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_DBG_REGISTER Error registering for IGP debug events: [hex], '[chars]'

Explanation    IGP failed to register with the debug module for printing messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_LTRACE_INIT Error initializing LTRACE buffers: [hex], '[chars]'

Explanation    A process failed to initialize internal tracing buffers in the IGP/TE API DLL

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_BIND Failed to bind to SysDB: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_REG_NOTIFY Failed to register for [chars] notifications: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_UNREG_NOTIFY Failed to unregister for [chars] notifications: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-CLIENT_ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-DATA_QUEUE_FULL message queue is full. Cannot accept more element.

Explanation    Data queue is full and it cannot accept more element. It could be a result of memory limitation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource. This could be because the topology is too large for the memory installed in the router.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-INVALID_TLV Data ([dec]) is too big or small([dec])

Explanation    Failed to send data due to the limitation of the buffer size. This is an internal error. It requires to reduce the number of interfaces.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-SERVER_ERR_CLINFO_HOLD Error in saving client's message channel information

Explanation    IGP failed to save its client's message channel information. This could be a result of channel down or resource allocation failure.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-SERVER_ERR_CLINFO_UNHOLD Error in releasing client's message channel information

Explanation    IGP failed to release its client's message channel information. This could be a result of channel down already.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

IP_STATIC_BFD_SESSMGR Messages

Error Message     
 
    
    
   

%ROUTING-IP_STATIC_BFD_SESSMGR-4-UNSUPPORTED_INTERFACE : [chars], Interface Handle - [hex]

Explanation    The nexthop is resolved over an unsupported BFD interface.

Recommended Action    Pick different nexthop to create the BFD session.

IP_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-IDB_DELETE Failed to delete idb for interface [chars] from '[chars]' thread

Explanation    The static routing process failed unexpectedly to delete an interface descriptor block from the idb WAVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-INTERNAL [chars]: [chars]

Explanation    The static routing process has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_EVENT Error processing [chars] event for [chars] from ITAL, table [hex] : [chars]

Explanation    A static routing process failed unexpectedly when processing an IP address change event. This may lead to spurious or missing connected and local routes in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_INTERFACE_CREATE Error handling create event for interface [chars]: [chars]

Explanation    The static routing process failed to correctly handle a create event for an interface which it was tracking.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_TDB_REGISTER_FAILED A static routing process failed function ip_static_ital_vrf_register for table [chars]: [chars]

Explanation    A static routing process failed to register a table with ITAL. This may lead to routes associcated with a the failed to be added in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-NHDB_DELETE Failed to delete nhdb for next-hop [chars] for table [hex]

Explanation    The static routing process failed unexpectedly to delete an next-hop descriptor block from the nhdb AVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-OTDB_DELETE Failed to delete otdb for object [chars]

Explanation    The static routing process failed unexpectedly to delete an objet tracking descriptor block from the otdb AVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-PATH_BP_DELETE Failed to delete backpointer to path [chars]/[unsigned int] from [chars] [chars]

Explanation    The static routing process failed unexpectedly to delete a path from an interface or next-hop descriptor block's path backpointer list.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_BATCH [chars]: Failed to send RIB batch buffer re-populating RIB for table [hex]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB with a batch of updates.

Recommended Action    Check the routing table to see whether any static routes are missing (Use 'show route static'). Please contact TAC only if the error is persistent. If the error is transient especially when the RIB process has gone down like in case of failover, and there is no functionality impact then it is ok to ignore this message.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_PREFIX Error re-installing route after a clear table event for prefix [chars]/[unsigned int] in table [hex]: [chars]

Explanation    There was an error re-installing a route in the RIB after receiving a 'clear prefix' event.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_TABLE Error re-installing routes after a clear table event for table [hex]: [chars]

Explanation    There was an error re-installing routes in the RIB after receiving a 'clear table' event.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_UNKNOWN_PREFIX Received a clear event for unknown prefix [chars]/[unsigned int] in table [hex]

Explanation    The static routing process received a clear event from RIB for a prefix which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_UNKNOWN_TABLE Received a clear event for unknown table [hex] (Prefix [chars])

Explanation    The static routing process received a clear event from RIB for a table which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_ECMP Failed to update RIB after ECMP recalculation for table [hex], prefix [chars]/[unsigned int]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after an ECMP recalculation.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_FETCH Error fetching event from RIB: [chars]

Explanation    The static routing process failed unexpectedly to fetch a notification event from RIB.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_FULL Failed to update RIB during full topology download for table [hex], prefix [chars]/[unsigned int]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after RIB restarted.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_INTERFACE Failed to update RIB for table [hex], prefix [chars]/[unsigned int], after receiving interface state event for [chars]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after an interface state change event.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP Failed to update RIB for table [hex], prefix [chars]/[unsigned int] after receiving next-hop resolution event for [chars]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after a next-hop resolution event.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP_REGISTER Failed to register next-hop notification with RIB for table [hex], prefix [chars]: [chars]

Explanation    The static routing process failed unexpectedly to register a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.

Recommended Action    Check the Next-hop table in static to see whether any static next-hops have been registered or not(Use 'Show static next-hop' and 'show rib next-hop ipv4_static/ipv6_static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP_UNREGISTER Failed to unregister next-hop notification with RIB for table [hex], prefix [chars]: [chars]

Explanation    The static routing process failed unexpectedly to unregister a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.

Recommended Action    Check the Next-hop table in static to see whether any static next-hops have been unregistered or not(Use 'Show static next-hop'

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_OBJECT Failed to update RIB for table [hex], prefix [chars]/[unsigned int] after receiving object state up event for [chars]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after an object state up event.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_TOO_MANY_PATHS Prefix [chars]/[dec]: Maximum path count exceeded. Please remove (next-hop [chars], interface [chars]) from the running configuration.

Explanation    The maximum allowed number of next-hop paths for a single destination prefix has been exceeded. One or more paths have not been installed in the RIB, and should be removed from the running configuration.

Recommended Action    Excess next-hop paths should be removed from the running configuration.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-SHUTDOWN Process is shutting down: [chars]

Explanation    The static routing process has performed a graceful shutdown and will be restarted.

Recommended Action    Check to make sure the process has restarted. If not, restart manually Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-TDB_DELETE Failed to delete tdb for table [hex]'

Explanation    The static routing process failed unexpectedly to delete a table descriptor block from the tdb AVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-TDB_REGISTER_FAILED A static routing process failed function ip_rib_protocol_register for table [hex]: [chars]

Explanation    A static routing process failed to register a table with RIB. This may lead to routes associcated with a the failed to be added in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-UPDATE_COMPLETE Failed to send 'update complete' notification to RIB for table [hex]: [chars]

Explanation    The static routing process unexpectedly failed an attempt to signal to the RIB that the given table is now in sync

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static'), and whether the protocol is in sync(Use 'show rib clients protocol').

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-4-CONFIG_NEXTHOP_ETHER_INTERFACE Route for [chars] is configured via ethernet interface without nexthop, Please check if this is intended

Explanation    The static route via ethernet interface without nexthop is configured. This may cause come inconsistancy.

Recommended Action    Refer to the configuration guidelines for static route nexthop interface

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-6-CONFIG_MAXIMUM_CHANGE The maximum number of configurations for static routes has been changed from [unsigned int] to [unsigned int]

Explanation    The maximum number of static route configurations which may be entered has been changed.

Recommended Action    Refer to the configuration guidelines for the maximum allowed limit for static routes

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-6-NHDB_LOCAL The next-hop [chars] for table [hex] is a local route. The static route(s) that has the matching next-hop will not be installed.

Explanation    The nexthop of a static route is a local route. This is an invalid configuration.

Recommended Action    Check configuration for the static route and its next-hop.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-6-NHDB_OUT_OF_SUBNET The next-hop [chars] for route [chars] in vrf [chars] is outside of the subnet for [chars] and will not be installed in the routing table.

Explanation    The nexthop of a static route is outside of outgoing interface. This is an invalid configuration.

Recommended Action    Check configuration for the static route and its next-hop.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-6-NHDB_WITHIN_SUBNET The next-hop [chars] for route [chars] in vrf [chars] which was previously outside of the subnet for [chars], is now within the subnet and will be installed in the routing table.

Explanation    The nexthop of a static route was outside of outgoing interface. Now it has resolved through the the same interface so became valid configuration.

Recommended Action    Check installed routes for the static route.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-7-ITAL_INTERFACE_EVENT Received a [chars] event for unknown interface [chars]

Explanation    The static routing process received a change notification event from ITAL for an interface which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing(Use 'show route static').

IPMC_GTRIE_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-3-ERR [chars]

Explanation    This is a catch all error message. It usually means an uncorrectible problem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. GTRIE debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. GTRIE debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPMC_GTRIE_DEFAULT Messages

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-2-FATAL [chars]

Explanation    Internal error. Usually sever problems such as failing to free memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-3-INIT_ERR [chars]

Explanation    Error while initializing Gtrie. Initialization failed and aborted

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-4-INIT_WARN [chars]

Explanation    Error while initializing Gtrie. Initialization will continue

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-4-WARN [chars]

Explanation    Internal error. A significant event but we can still continue

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_ADJ Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-ADD_DB_MALLOC_FAIL Malloc Failure in trying to add adj for [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-ENT_UPDATE Update for ifh:[hex], if:CH[hex], [chars] skipped. Reason: either no fib or netio IDB

Explanation    The layer 2 adjacency could not be installed for the interface. This might cause problems in forwarding traffic to this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-L2_LOADHASH_FAIL Could not register ipv4 l2 loadhash function with AIB. Error equals [chars]

Explanation    Call to register IPv4 l2 loadhash function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-NO_FIBIDB IP-ADJ: No fibidb

Explanation    Adding an adjacency to the adjacency database failed. Reason for this failure is no fib IDB

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-4-ADD_DB Update for ifh:[hex], if:CH[hex], [chars] failed. Unable to update database

Explanation    The layer 2 adjacency could not be installed for the interface. This might cause problems in forwarding traffic to this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-4-LARGE_MAC IP-ADJ([chars]): macaddr change out of bounds

Explanation    Extra large MAC change

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-6-DEBUG_REG ipv4_adj: Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-7-INV_MSG_CODE Unknown aib message opcode [dec]

Explanation    The event manager passed an unknown message code

Recommended Action    No action is required.

IPV4_IGMP Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-ACCOUNTING_RECORD_DROPPED IGMP accounting was unable to add a record: [chars]%s: [chars]

Explanation    Due to an unexpected internal error, the IGMP accounting subsystem was not able to add a record to acccount for join/leave related events. The logs may therefore be incomplete and missing some entries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-ARM_UPDATE_ERR Interface [chars][[hex]] has vrf [chars] vrf_id [hex] set, New vrf [chars] vrf_id [hex]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-CHUNK_ERR Failed to create chunk for [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-CONTEXT_REG_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-EDM_INIT ERROR : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_ADD_ERR [chars]Fail to add [chars] into group database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_ERR [chars]Group [chars] failed: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_FIND_ERR Fail to find [chars] in group database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_ADD_ERR [chars]Fail to add [chars] into database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_FREE_ERR [chars]Fail to free [chars] from database: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_HANDLE_MISMATCH_ERR [chars]Interface [chars][[hex]][stale [chars]] handle mishmatch, handle in IM update [hex]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_INIT_ERR [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_LOST_GROUPS_ERR [chars]Local joined groups on [chars] will be lost

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_PRESENT_ERR [chars]Interface [chars][[hex]] is still present in vrf [chars]. check_idb [chars][[hex]] loc [dec]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_STATE_MONITOR_ERR [chars]Fail to monitor interface state of [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_VERIFY_ERR [chars]Interface [chars](context [chars]) doesn't belong to context [chars], please clear config error

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_VERIFY1_ERR [chars]Interface [chars] has configured under context [chars] already

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IM_BATCH_STATE_ERR [chars]Invalid state for IM state registration batch on [chars] ([chars])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IM_BULK_ERR Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-INIT_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-JOIN_IN_SSM_RANGE [chars]%s [chars] in SSM range. Join operation postponed

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-LTRACE_ERR Failed to [chars]: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-MRIB_CONN_ERR MRIB connection error - [chars] in [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-NET_ERR [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SOCK_ERR [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_BIND_ERR Sysdb Bind error for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_BSCAN_ERR [chars]Sysdb backend scan failed for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_INIT ERROR : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_REG_ERR Sysdb Registration error : [chars] for [chars] [[chars]]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-WDSYSMON_EVENT_ERROR Received an invalid event from WDSysmon

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-WDSYSMON_REGISTER_ERROR [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOM_STATE_THROTTLE Received [chars] memory depletion warning, stop creating new igmp state

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOM_STATE_UNTHROTTLE Node memory back to normal, new igmp states will be created

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOR_WARN [chars]%s: [dec]

Explanation    Maximum number of group accepted, either per interface or globally.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-6-ACCESS_GROUP_INFO [chars]ACL applied, removed [chars] from [chars]

Explanation    ACL applied to interface on which denied groups join previosly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-6-IPARMS_UPDATE_ERR Dropping iparms update: type [chars] for [chars] [[hex]]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MCAST_CHKPT Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_CHKPT-3-ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MCAST_NETIO_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_NETIO_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. Multicast NetIO debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_NETIO_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. Mcast netio debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD_HFR Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-5-ERR_SYSDB_INIT [chars] : [chars]

Explanation    The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY Couldn't register bags : [chars]

Explanation    The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_EDM_REGISTER Couldn't register edm : [chars]

Explanation    The MFWD-HFR library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_HFR-7-ERR_GEN [chars] failed : [chars]

Explanation    MFWD-HFR library encountered error during setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD_VKG Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-3-INACTIVE_FLOW [chars] ([chars],[chars]/[dec]) has been detected.

Explanation    Inactive flow has been detect. This error is normally cause by lack of traffic from the source due to errors.

Recommended Action    If the error persists, determine the cause and take appropriate action.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-3-INACTIVE_FLOW [chars] ([chars],[chars]/[dec]) has been detected.

Explanation    Inactive flow has been detect. This error is normally cause by lack of traffic from the source due to errors.

Recommended Action    If the error persists, determine the cause and take appropriate action.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-5-ERR_SYSDB_INIT [chars] : [chars]

Explanation    The MFWD-VIKING library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-5-ERR_SYSDB_INIT [chars] : [chars]

Explanation    The MFWD-ASR9K library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_BAG_REGISTRY Couldn't register bags : [chars]

Explanation    The MFWD-ASR9K library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_BAG_REGISTRY Couldn't register bags : [chars]

Explanation    The MFWD-VIKING library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_EDM_REGISTER Couldn't register edm : [chars]

Explanation    The MFWD-VIKING library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_EDM_REGISTER Couldn't register edm : [chars]

Explanation    The MFWD-ASR9K library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_GEN [chars] failed : [chars]

Explanation    MFWD-VIKING library encountered error during setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD_VKG-7-ERR_GEN [chars] failed : [chars]

Explanation    MFWD-ASR9K library encountered error during setup. The init setup will be retried for finite number of retries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ADJ_CREATE [chars] [chars] : [chars]

Explanation    Internal error: Cannot create the adjacency for a particular interface. Will retry for few times

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-BOUNDARY_FAIL [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR [chars]

Explanation    These are unexpected errors

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_FINT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_MAP Failed to map AIB table: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_ZERO_ALL [chars]: [chars]

Explanation    We were not able to set all cached adjacencies to zero when we got ELIBBAD from AIB

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_DEBUG_INIT_EVENT Failed to initialize and chain together the debug event discriptors : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_DEBUG_REG Sysdb registration for debug config failed : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_CREATE Event connection create for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_NOTIFY Event connection notify for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_OPEN Event connection open for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_SETRETRY Event connection setretry for [chars] failed: [chars]

Explanation    Error while setting event connection setretry. This will cause ipv4_mfwd_partner and ipv6_mfwd_partner processes to exit. When process exists, sysmgr will automatically respawn the process for some number of times. If it still fails, process remains in the exit state. This will impact multicast forwading.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CREATE Cannot create event manager : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_INIT_EVENT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_TIMER_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_TIMER_LEAF_NEW [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IDB_INIT Cannot intitialize IDB library : [chars]

Explanation    Failed while initializing IDB library.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH_BIND Failed to initialize pfi ifh connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH_INIT Failed to initialize IFH server : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH_UNBIND Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IM_CNTL_SVR_BIND Failed to initialize im control server connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IMC_CAPS_DATAPATH_CONTROL im_caps_datapath_control error for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MEM_ALLOC [chars]

Explanation    These are unexpected errors

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MEM_ALLOC_ARM_IDB [chars] [hex]

Explanation    These are unexpected errors

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MLIB_INIT [chars] [chars]

Explanation    Failed while initializing multicast library.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MRIB_INIT Failed to initialize MRIB connection : [chars] failed : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_NSF_INIT Failed to initialize Multicast NSF : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_PAK_CLIENT_CONN Failed to initialize packet connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SHMWIN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_REG Couldn't register bags : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BSCAN SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_EDM_FNS_INIT SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_EDM_REG SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_REG_NOTIFY SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_REG_VERIFY SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-EXIT Unexpected exit

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-GEN_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-GROUP_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-HA [chars]: [chars]

Explanation    error while doing an HA operation (e.g. starting frequent restart monitor)

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IARM_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IDB_FAIL [chars] operation failed on [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IM_LOOKUP_FAILED IM lookup failed for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-INSTALL [chars] : [chars]

Explanation    Error while performing upgrade/downgrade/install operation

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-LRD_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_CONN_RETRY Cannot connect to [chars] using event conn Mgr after [dec] retries: [chars]

Explanation    Reached the maximum number of retries to connect to server using event conn

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_DISABLE_RETRY Failed to disable multicast after [dec] retries: [chars]

Explanation    Reached the maximum number of retries to disable multicast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_ENABLE_RETRY Failed to enable multicast [dec] retries: [chars]

Explanation    Reached the maximum number of retries to enable multicast and

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TABLE_OPERATION_FAIL [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TABLE_OPERATION_FAIL_GLACIAL [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TRANSACTION_PENDING_FLAG [chars] : [chars]

Explanation    Failed to clear, set, or get transaction pending flag. That can only happen if the APIs to do that are called before shared mem window is opened, or if thereis a bug

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TTL_CFG_FAIL [chars] [chars]: [chars]

Explanation    Failed to apply a TTL threshold config. The operation will be retried.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ADJ_CREATE_RETRY [chars] [chars] : [chars]. Retrying

Explanation    Internal error: Cannot create the adjacency for a particular interface. Will retry for few times

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-CLEAN_ALL_FAIL [chars] [chars]

Explanation    Failure while doing all reource cleanup

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_AIB_UPDATE Failed to [chars] AIB for interface [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_LTRACE_INIT [chars] [chars]

Explanation    Error ocured while enabling mcast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_MRIB_INIT_RETRY Failed to initialize MRIB connection in [chars]. Retrying later: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_MRIB_SEND_RESPONSE_RETRY Failed to post signal to MRIB in [dec] retries. Reseting connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_REG [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_SPEC_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-FROM_MRIB_UPDATE MFIB couldn't process update from MRIB : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-FROM_MRIB_UPDATE_GLACIAL MFIB couldn't process update from MRIB : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-SVD_ERR [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-TERMINATE [chars] [chars]

Explanation    Error ocured while disabling mcast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-TO_MRIB_MDT_UPDATE MFIB couldn't post MDT upd to MRIB: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-TO_MRIB_MOFRR_UPDATE MFIB couldn't post MOFRR upd to MRIB: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-TO_MRIB_UPDATE MFIB couldn't post update to MRIB: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-CLEAN_ALL [chars] [chars]

Explanation    Information regarding all resource cleanup

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-ERR_SHMWIN_MUTEX [chars] : [chars]

Explanation    NetIO or Mfwd terminated while holding shared mem mutex. Recovery action will be taken

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-IP_ADDR_RETRY [chars] [chars]

Explanation    APplying one or more IP address configs may have failed. We will retry them. This is a not a problem unless it keeps showing up continuously.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MCAST_DISABLED [chars] [chars]

Explanation    Most likely mfwd restarted and while it was down mcast was disabled. The other possibility is that mfwd retsarted while disabling mcast. In either case, when mfwd comes up, it will find that mcast is already disabled. Hence it will log this message and exit normally

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MFIB_RESET [chars] : [chars]

Explanation    Got notification that the the MFIB has been reset. Will clear MFIB and restart

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MRIB_UPDATE_RETRY [chars] [chars]

Explanation    Processing one or more updates may have failed. We will retry them. This is a not a problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-PER_PREFIX [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-PER_PREFIX_GLACIAL [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-ROUTE_UPDATE_FAIL [chars] Restarting to recover.

Explanation    Was not able to commit at least one route after retrying for the maximum number of times. In this case, mfwd will restart in an attempt to recover. This is not an error. It just indicates that mfwd is restarting to recover from possible stale route problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_PER_PREFIX Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_PER_PREFIX_GLACIAL Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_ROUTE_RATE Cannot [chars] rate for routes for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route rate in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_ROUTE_RATE_GLACIAL Cannot [chars] rate for routes for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route rate in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-UPGRADE_AFFECT_TRAFFIC [chars] [chars]

Explanation    Most likely some one tried to upgrade/downgrade mfwd while we're not connected to NetIO. In this case, teh upgrade will wipe out all MFIB and traffic will be disrupted

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MLIB_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-3-ERR [chars]

Explanation    This is a catch all error message. It usually means an uncorrectible problem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. MLIB debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. MLIB debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MLIB Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-1-OOR_ROUTES_YELLOW Number of multicast routes has crossed [dec] hardware limit. Please delete some routes immediately to prevent new routes being blocked

Explanation    MFIB on the node has detected the number of multicast routes has exceeded the prescribed limits. Any further routes increase could cause MFIB to block the routes from being programmed in hardware.

Recommended Action    Take immediate action to delete multicast routes from the system.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-2-OOR_ROUTES_GREEN MFIB has unblocked the multicast route update to hardware. Please ensure multicast routes are not crossed the hardware limit

Explanation    MFIB has unblocked the multicast route update to hardware. The node had detected the number of multicast routes exceeded the prescribed limits and route update to hardwared had been blocked. The situation has been cleared, hence mulitcast route update has been unblocked.

Recommended Action    Make sure the number of multicast routes not exceed the prescribed limits.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-2-OOR_ROUTES_RED Number of multicast routes has exceeded the hardware limits and new routes are now blocked. Please delete routes immediately to recover

Explanation    MFIB on the node has detected the number of multicast routes has exceeded the prescribed limits and new routes have been blocked.

Recommended Action    Take immediate action to delete multicast routes from the system.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-DATAPATH_CONTROL im_caps_datapath_control error in function [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-DELETE_FAIL Delete Failed for ([chars] [chars]/[dec]) from [chars] table [chars]

Explanation    Internal error. Deleting an entry from ingress or egress failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-EVENT_CONN_MGR Cannot open event connection manager: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-EVENT_MGR Cannot create event manager: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-SHMWIN_ERR [chars] [chars]: [chars]

Explanation    Error while doing shmwin operation

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-STATE_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-PER_PREFIX [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-PER_PREFIX_GLACIAL [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-SVD [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-TABLE_PER_PREFIX Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_PIM Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ACL_GETLIST_ERR Cannot get ACL for [chars] [chars]: ([dec]) [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ACL_REG_ERR Failed to register callback for acl [chars]: ([dec]) [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ACTIVE_GRANGE_ERR [chars]Invalid state - active grange in mrib [chars]/[dec] RP - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-AIPC_ERROR Fatal AIPC error: - ([chars])

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-BGP_ENS_ERROR PIM BGP communication [chars], [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-CONTEXT_CREATE Failed to create PIM context for vrf [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-CONTEXT_INIT [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-CONTEXT_REGISTRATION Ital init failed [dec]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_CHKPT_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_CHUNK_CREATE [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_DEBUG_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_ASYNC_SEND Error sending async message to [chars] thread during [chars] with pulse code [dec]: error equals [dec]([chars])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_CREATE [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_EVM_HANDLER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_NOTIFY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_OPEN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_SETRETRY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_EVENT_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_MESSAGE_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_BATCH_STATE [chars]Invalid state for IM state registration batch on [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_BULK Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_CAPS_ADD Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_CAPS_DATAPATH_CONTROL Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_INTERFACE_CREATE [chars]Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_INTERFACE_DELETE [chars]Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_INIT [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_LIST [chars]List error : [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_LTRACE_INIT ltrace_init failed for '[chars]': [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MAX_PATH [chars]RIB max path exceeded for [chars], total paths: [dec], reset to maximum

Explanation    A software error has occurred while trying to read out the checkpointed rpf data. PIM rpf info may be incorrect

Recommended Action    Check show pim rpf output for correctness Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MEM_ALLOC [chars]for [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MGD_TIMER_GET_ROOT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MGD_TIMER_NEW [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_BIND [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_CONN MRIB connection error - [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_UNBIND [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_NSF_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_PAK_CLIENT_CONN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSMGR_READY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSMGR_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_WDSYSMON_EVENT Received an invalid event from WDSysmon

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_WDSYSMON_REGISTER [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-GEN_ERR [chars]Error - [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-IDB_HANDLE_MISMATCH_ERR Interface handle mismatch, handle in IM update [chars]:[hex], handle in PIM [chars]:[hex]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-IDB_INIT [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-IDB_VRF_BIND [chars]Interface [chars] belongs to context [chars]. Please clear the config error

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-INTF_FWD_REF_ERR [chars]Interface Forward Reference Store error - [chars]: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-INVALID_MHOST_DEFAULT [chars]Interface [chars] should not be configured as mhost default

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MDR_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MULTICAST_IGP_MTR [chars] [chars] multicast topology incorrect sysdb deletes received, refcount [dec]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MULTICAST_INTACT [chars]%s multicast intact incorrect sysdb deletes received, refcount [dec]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-NET_ERR [chars]%s : [chars]

Explanation    Internal error. If the error is seen during transient system state, for instance during LC OIR, it is harmless and can be safely ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_COUNTER_ERR [chars]OOR [chars] counter has turned negative: [dec]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_GLOBAL_BSR_CRP_LIMIT Global BSR candidate-rp maximum reached: [dec], new CRP-cache not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_GLOBAL_BSR_GRANGE_LIMIT Global BSR group range maximum reached: [dec], new group range not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_VRF_BSR_CRP_LIMIT VRF: [chars] BSR candidate-rp maximum reached: [dec], new CRP-cache not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_VRF_BSR_GRANGE_LIMIT VRF: [chars] BSR group range maximum reached: [dec], new group range not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-PROTOCOL_ERR [chars]%s - [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-RP_INIT [chars]%s : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-SRC_UPDATE_ERR Error in [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-v6_DATA_MDT_INVALID_GRANGE Invalid grange

Explanation    Internal Error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-v6_DATA_MDT_INVALID_VRF Invalid vrf-id ([hex])

Explanation    Invalid vrf-id received from pim/pim6

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-v6_DATA_MDT_NO_CORE Data MDT core routes missing ([chars], [chars])

Explanation    Missing data MDT core routes

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-v6_DATA_MDT_NO_MEM Could not allocate memory for message header

Explanation    Internal Error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-CFG_WARNING [chars]%s

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-ITAL_CREATE_WARN ITAL create notification for table with pending cleanup old vrf_id [hex], table_id [hex] : route count [dec] : new vrf_id [hex] table_id [hex]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-MIB_GROUP_TREE_ERR [chars]Failed to [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-MYADDR_DB_ERR [chars]Failed operation: [chars] for [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOM_STATE_THROTTLE Received [chars] memory depletion warning, stop creating new pim state

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOM_STATE_UNTHROTTLE Node memory back to normal, new pim states will be created

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_GLOBAL_BSR_CRP_THRESHOLD_WARN Global BSR candidate-rp range threshold reached: [dec] CRP creation will soon be throttled.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_GLOBAL_BSR_GRANGE_THRESHOLD_WARN Global BSR group range threshold reached: [dec] Group Range creation will soon be throttled.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_REGISTER_OK [chars]The number of PIM Register states ([unsigned int]) is now below the maximum. Normal PIM Register handling will resume.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_REGISTER_THRESHOLD_WARN [chars]The threshold number of PIM Register states ([unsigned int]) has been reached. Register state creation will soon be throttled. Configure a higher maximum or take steps to reduce Register state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_REGISTER_WARN [chars]The maximum number of PIM Register states ([unsigned int]) has been reached. Register state creation will be throttled. Configure a higher maximum or take steps to reduce Register state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_ROUTES_OK [chars]The number of PIM routes ([unsigned int]) and route-interfaces ([unsigned int]) are now below the maximum. Normal PIM route handling will resume.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_ROUTES_THRESHOLD_WARN [chars]The threshold number of PIM routes ([unsigned int]) or route-interfaces ([unsigned int]) has been reached. Route creation will soon be throttled. Configure a higher maximum or take steps to reduce multicast state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_ROUTES_WARN [chars]The maximum number of PIM routes ([unsigned int]) or route-interfaces ([unsigned int]) has been reached. Route creation will be throttled. Configure a higher maximum or take steps to reduce multicast state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_VRF_BSR_CRP_THRESHOLD_WARN VRF: [chars] BSR candidate-rp range threshold reached: [dec] CRP creation will soon be throttled.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_VRF_BSR_GRANGE_THRESHOLD_WARN VRF: [chars] BSR group range threshold reached: [dec] Group Range creation will soon be throttled.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RANGE_INIT [chars]%s in [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_DROP RPF Redirect exhausted all member's bandwidth: ([chars], [chars]) [chars] join dropped

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_HAS_BW RPF Redirect bandwidth available on [chars], ([chars], [chars]) [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_NO_BW RPF Redirect bandwidth exhausted: ([chars], [chars]) join dropped on [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_NSF_DUP RPF Redirect ([chars], [chars]) on [chars], duplicate checkpoint playback.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_PREEMPTED RPF Redirect ([chars], [chars]) on [chars] preempted by snooped ([chars], [chars])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_SN_NO_BW RPF Redirect bandwidth exhausted: ([chars], [chars]) forwarded by [chars] on [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_SN_THRESHOLD RPF Redirect bandwidth exceeding threshold: ([chars], [chars]) on [chars] rpf [chars] [[dec]:[dec]:[dec]:[dec]]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_THRESHOLD RPF Redirect bandwidth exceeding threshold: ([chars], [chars]) on [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_REDIRECT_UP_REJECTED RPF Redirect ([chars], [chars]) join on [chars] rejected by upstream [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-TE_MDT_MISMATCH_WARN TE Router ID [chars] Mismatch with MDT source [chars], Please fix config

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INTCHG [chars]PIM interface [chars] [chars]

Explanation    PIM interface state change message.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INVALID_JP [chars]PIM invalid (*, [chars]) J/P message from [chars] with RP address [chars]

Explanation    PIM invalid J/P notification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INVALID_REGISTER [chars]PIM invalid register message from [chars] for group [chars] RP address [chars], [chars]

Explanation    PIM invalid register message notification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-NBRCHG [chars]PIM neighbor [chars] [chars] on [chars] [chars]

Explanation    PIM neighbor state change message.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-RP_MAPPING_CHG [chars]PIM [chars] for [chars]/[dec] RP [chars] proto [chars]

Explanation    PIM RP mapping change notificaiton.

Recommended Action    No action is required.

IPV4MC_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_CERR_V [dec] [chars] [chars]

Explanation    Internal error. Cannot Register with CERR_V subsystem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_DEBUG_INIT [chars] [dec] [chars]

Explanation    Internal error. Static Mcast debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_EVENT_INIT Cannot Initialize sigevent structure: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_EVM_CREATE Event Manager creation Failed: [chars]

Explanation    Internal error. Failed while creating event manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_IDB_INIT Cannot initialize IDB list: [chars]

Explanation    Internal error. Cannot create initialize IDB list

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_INTF Error [chars] [chars]

Explanation    Internal error. Error while doing IM or IDB stuff

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_MRIB [chars]: [chars]

Explanation    Internal error. Error while doing MRIB API

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_ROUTE [dec]: [chars] ([chars],[chars]/[dec])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_ASYNC_CODE Cannot obtain pulse code for the timer: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_CREATE_LEAF Cannot create timer leaf: [chars]

Explanation    Internal error. Cannot create manageed timer leaf

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_INIT Cannot create managed timer: [chars]

Explanation    Internal error. Cannot create manageed timer

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4MC_STATIC-7-ERR_TOPOLOGY_INIT Cannot create static topology

Explanation    Internal error. Cannot create manageed timer leaf

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_FIB Messages

Error Message     
 
    
    
   

%ROUTING-IPV6_FIB-2-RIBREJECT Rejecting RIB Update for [chars]/[dec] status [dec]

Explanation    Rejected a route update from the RIB.

Recommended Action    Try repopulating the missing route. If not recovered, it will lead to forwarding inconsistencies. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IPV6_FIB-7-PFIFAIL PFI-IFH Server Error for [hex] status equals ([dec])

Explanation    Cannot talk to the PFI-IFH process

Recommended Action    Informational message. PFI-IFH process does not have the information about the interface-handle at this very moment Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ISIS_IP_ORA Messages

Error Message     
 
    
    
   

%ROUTING-ISIS_IP_ORA-3-INSTBUILD Failed to build policy operation '[chars]' for attribute '[chars]'.[chars]%s ([hex])

Explanation    There was an internal error in the routing policy library and as a result routing policy may not be applied correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ISIS Messages

Error Message     
 
    
    
   

%ROUTING-ISIS-2-DUPSYSTEM Possible duplicate system ID [chars] detected; Duplicate LSP received from host [chars], on interface [chars]

Explanation    The router with the system ID SYSTEM-ID has transmitted too many LSPs in brief period of time, which could indicate constant LSP reflooding caused by a duplicate system ID.

Recommended Action    Check the configuration of other routers in the area for duplicate IDs.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-BFD_SESSION_CREATE_FAIL Can't create BFD session to [chars]: [chars] ([hex])

Explanation    IS-IS failed to create a session with the BFD server. Creation will be reattempted on the next received IIH. Depending on the neighbor's support of BFD this may cause adjacencies to go down.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-DBG_INIT_FAILED IS-IS failed to initialize its debug resources and will abort

Explanation    IS-IS failed to initialize one of its debug services. The process cannot continue without its debug services and so will have aborted, but should have been restarted rapidly afterwards. This message will have been preceded by another one providing more precise details of the failure. The problem may be due to low memory resources and the detail of the preceding error message provides an indication of whether this is the case.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_ATOMIC_RING_OP Error [chars]: [chars]: '[chars]', [hex]

Explanation    An unexpected error occurred whilst performing an atomic ring operation. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAD_SOCKET_ADDR_LENGTH Bad socket address length ([unsigned int], should be [unsigned int] or [unsigned int]) in packet 0x[pointer]

Explanation    A packet which IS-IS has received from its network socket contains a socket address with an invalid length. This is an internal error which indicates that the packet has been corrupted after being received by the local router but before being received by IS-IS. The problematic packet has been dropped. If this is an occassional problem then IS-IS should be able to continue operating normally when the packet is resent. If the message recurs, then IS-IS may start to operate incorrectly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAG_ENCODE Failed to encode data for [chars] for external data manager (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. An attempt to encode data for this has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAG_REGISTER Failed to register bag structures with bag server (Reason: [chars])

Explanation    The process could not register the data structures used by IS-IS statistics and management agents.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_CLOCKTIME Error retrieving or setting the time of the [chars] clock: [chars] ([hex])

Explanation    An unexpected error occurred whilst retrieving the time of a System Clock. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_CONFIG_TO_TE Error during communication of [chars] information to TE processes: [chars]

Explanation    IS-IS was unable to inform the TE processes of its configuration or basic operational state.

Recommended Action    Restart the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_ADD Failed to add an entry to an external data manager data list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_CREATE Failed to create external data manager data list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the datalist to be returned has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_SET_MORE_FLAG Failed to set the 'more data' flag on a returned [chars] data list: error [hex] ([chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to set the 'more data' flag to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_EDM_FNS_INIT [chars] management function initialization failed: [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the handler functions for external data management. As a result, show and clear commands will not function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_EDM_REGISTER [chars] SysDB registration failed: [hex], '[chars]'

Explanation    The process could not register with SysDB for management of the data used by IS-IS statistics and management agents. As a result, show and clear commands will not function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_JOB_ID Failed system manager call to get IS-IS job_id: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to get its job_id. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_NODE_STATE Failed system manager call to get the node state information: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to get the node related state information. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_TUPLE Failed system manager call to retrieve the process tag name: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to retrieve its tag name during process initialization. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_IFINDEX Error [chars]: '[chars]', [hex]

Explanation    An unexpected error occurred whilst performing an SNMP ifindex operation. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LIST_ADD Failed to add an entry to an external data manager list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LIST_CREATE Failed to create external data manager list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the list to be returned has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LOCKING_FAIL Unexpected error '[chars]' trying to [chars] the [chars]

Explanation    An unxpected error occurred whilst trying to lock or unlock an IS-IS resource. This implies an internal programming error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LTRACE_BUFFER Error [chars] trace buffer '[chars]': [chars] ([hex])

Explanation    An unexpected error occurred whilst accessing a tracing buffer. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_MEMPOOL_CREATE Failed to create the [chars]

Explanation    IS-IS failed to create a memory pool. IS-IS cannot operate without this resource and will abort. The most likely cause is a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart IS-IS. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_NODE_STATE_CHANGE Failed to register with system manager to get node state change notification: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to register to get node state change notification. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_ACCESS Error [chars] a packet buffer (0x[pointer]): [chars]

Explanation    IS-IS encountered an error whilst accessing a packet buffer. The relevant packet has been ignored. The message describes the nature of the error. If the problem is transient then IS-IS will recover. The error may be due to a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. Consider restarting IS-IS.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_CONN Error [chars] the managed connection to the packet server: [chars] ([dec])

Explanation    IS-IS encountered an error whilst trying to set up a managed connection to the Packet Server. This is a serious error as IS-IS requires Packet I/O services to be able to form adjacencies, and the IS-IS process will shut itself down in response. This may be due to a low memory condition but is more likely to be a programming error. The error string and error code provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_GET_BUFFER Error obtaining a packet buffer of length %zu

Explanation    IS-IS encountered an error whilst attempting to acquire a packet buffer to use to send a packet. The relevant packet has been dropped. The problem may be due to resource starvation. IS-IS will recover when sufficient resources become available.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PROC_AVAILABLE Failed system manager call to indicate that IS-IS has completed initialization: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to indicate that it has completed all its initialization and is now completely online. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PROC_READY Failed system manager call to indicate that IS-IS is ready: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to indicate that it's ready to proceed. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RECV_BAD_TE_MSG Received [chars] in the [chars] message from TE

Explanation    The process has received a TE message with invalid contents. As a result, the TE message is ignored and TE tunnel may not come up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RECV_PAK Error receiving packet: [chars]

Explanation    An internal error has occurred receiving the packet. This is most likely due to some failure in a system service or a limited resource being exhausted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RIB_BATCH_BUFFER Unexpected error [chars] batch of [chars] RIB updates ([dec])

Explanation    IS-IS encountered an unexpected error whilst defining a batch of updates to be sent to the RIB. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RIB_PATH Unexpected error installing a path to [chars] in the [chars] RIB ([dec])

Explanation    IS-IS was unable to install a path to the specified network in the the specified RIB because the RIB rejected the request. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SEND_PAK Error sending IS-IS packet: [chars]

Explanation    The process encountered an error while sending the IS-IS packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_ACCESS Error [chars] [chars] SysDB item ([chars]): [hex], '[chars]'

Explanation    An unexpected error occurred whilst accessing the specified SysDB item. This may be due to resource starvation or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_APPLY_BATCH Error in SysDB batch: [chars]: [chars] ([hex])

Explanation    An unexpected error occurred whilst checking for more SysDB batches after receiving request to shutdown the process. This may be due to resource starvation or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_CONNECT [chars] SysDB connection could not be established at the path [chars]: [hex], '[chars]'

Explanation    IS-IS failed to bind to SysDB while opening a connection to it.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_DATALIST Error [chars] SysDB datalist containing [chars]: [chars] ([hex])

Explanation    An unexpected error occurred whilst listing the contents of a directory in SysDB. This may be due to resource starvation or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_REG_NOTIFY Failed to register for SysDB notifications on path [chars] ([chars])

Explanation    IS-IS failed to register for notification of changes on the displayed SysDB path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_REG_VERIFY Failed to [chars] ([chars])

Explanation    IS-IS failed to register for verification of changes to its configuration data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_STRING_CODING Error [chars] a '[chars]' string: [hex], '[chars]'

Explanation    IS-IS failed to encode or decode a string using the SysDB encoding. Aa result IS-IS will not be able to complete the operation it was performing which it encountered the error. The message describes the string which was being encoded or decoded and this should indicate the nature of the operation which was being performed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_TAG_NAME Error retrieving process tag name: [hex], '[chars]'

Explanation    An IS-IS process failed to retrieve its process tag name during process initialization. This is a fatal error and the IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_CREATE Error starting [chars] thread: [dec]

Explanation    IS-IS failed to create a thread essential to its operation. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_KEY_CREATE Error creating '[chars]' registry for thread specific value: [chars]

Explanation    IS-IS failed to create a key to store thread specific values such as the name of a thread. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_ONCE Error performing a once per thread lifetime operation to initialize [chars]: [chars]

Explanation    IS-IS failed to initialize the specified resource. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_SET_SPECIFIC Error associating [chars] with thread: [chars]

Explanation    IS-IS failed to associated the specified per-thread resource with the thread. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_VRFN_FNS_INIT [chars] verification function initialization failed: [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the handler functions for verification of changes to its configuration data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVENT_CONN_CREATE_FAIL Error creating '[chars]' connection: [chars]

Explanation    IS-IS failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_DEQUEUE_FAIL Failed to remove [chars] from the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred whilst removing the specified object from the specified queue.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_ENQUEUE_FAIL Failed to enqueue [chars] on the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred while enqueueing the specified object on the specified queue.

Recommended Action    This failure is most probably due to limited memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_SIZE_FAIL Failed to retrieve the size of the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred whilst retrieving the size of the specified queue. As a result IS-IS's internal state may be inconsistent. This indicates an internal programming error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IM_CB_REG_FAIL Failed to register handler for IM [chars] events: [hex], '[chars]'

Explanation    IS-IS failed to register a handler for IM events relating to the specified protocol. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IM_CONN_TO_COID_FAIL Unexpected error retrieving connection ID from IMD connection context: [hex], '[chars]'

Explanation    IS-IS failed to retrieve a connection ID from the IMD connection context. This may be due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-INTF_SET_ADD_FAIL Failed to add [chars] to the set of [chars]: [hex], '[chars]'

Explanation    An unexpected error occurred whilst trying to add an interface to the specified collection of interfaces. This is most likely to be due to a low memory condition, but may be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IPV6_LAS Error [chars] IPv6 local address consumer service: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was using the IPv6 Local Address Consumer Service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-PDU_INSUFFICIENT_SPACE Unable to [chars] due to insufficient space in outgoing PDU

Explanation    The process was unable to add information to an outgoing PDU. This is most likely an MTU issue.

Recommended Action    Check the MTUs for the interfaces over which IS-IS is running.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-RSI_C_API_FAIL RSI [chars] failure, [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the RSI service for the specified error reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-RSI_C_LIB_INIT RSI init failure, [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the RSI service for the specified error reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-TIMESTAMP Operation '[chars]' failed during packet timestamping: [hex] ([chars])

Explanation    An operation failed during timestamp processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-TRIGGER Operation '[chars]' failed during log trigger processing : [chars]

Explanation    An operation failed during log trigger processing. This is not critical and IS-IS functionality should be unaffected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-AREALOST Too many IS-IS areas--cannot route to area [chars]

Explanation    Too many IS-IS areas--cannot route to area AREA-ADDRESS. This system has exceeded the limit of three learned area addresses. The largest address AREA-ADDRESS has been dropped from the list of active areas.

Recommended Action    Reduce the number of area addresses in the routing area.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_BIND_FAIL Attempt to connect to the BFD server failed: [chars] ([hex])

Explanation    IS-IS failed to connect to the BFD server. The connection will be retried.

Recommended Action    This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_CREATE_FAIL Attempt to create [dec] BFD session[chars] failed: [chars] ([hex])

Explanation    IS-IS failed to create one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_DELETE_FAIL Attempt to delete [dec] BFD session[chars] failed: [chars] ([hex])

Explanation    IS-IS failed to delete one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_DELETE_UNCONFIG_FAIL Attempt to admin shutdown [unsigned int] BFD session[chars] as a result of deconfiguration failed: [chars] ([hex])

Explanation    IS-IS failed to admin shutdown one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_SESSION_NOT_FOUND Failed to locate BFD session over [chars] to [chars] for an adjacency.

Explanation    IS-IS failed to locate a BFD session for a given adjacency. If necessary IS-IS will reconnect to the server to correct.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-CERR_REG_FAIL [chars]

Explanation    This system was unable to register the CERR DLL. This is probably due to a faulty installation.

Recommended Action    Be sure the libisis_error.dll is properly installed.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-DBG_REGISTER_FAILED Error registering for IS-IS debug events: [hex], '[chars]'

Explanation    IS-IS failed to register with the debug module for printing messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-DUPLICATE_MT_CAPABILITY Level [unsigned int] LSP [chars] contains multiple ([unsigned int]) MT capability items for [chars].[chars]%s

Explanation    The specified LSP contains multiple items advertising the same MT capability. This is an indication that the router which owns the LSP has generated its LSP incorrectly. If the MT capability items contain conflicting overload state then the message indicates this and IOS-XR determines that the router which issued the LSP is overloaded. If the MT capability items contain conflicting attached state then the message indicates this and IOS-XR determines that the router which issued the LSP is not attached.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_ACL Unexpected error whilst [chars] [chars] ACL [chars]: [hex], '[chars]'

Explanation    IS-IS encountered the specified unexpected error whilst performing the specified operation on the specified access-list. As a result IS-IS's operation will not correctly reflect the contents of the ACL. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_ADVMASK Error adding IS-IS to advertising mask of [chars] ([chars]): [hex], '[chars]'

Explanation    IS-IS failed to add itself to the advertising mask for the specified route and topology, that route corresponding to a connected route on an interface over which IS-IS is running. This means that any protocols which redistribute IS-IS into themselves will not receive the specified route. The problem is most likely to be caused by a failure by ipv4-io or ipv6-io to install the route at all, although it could also be due to low memory conditions.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_CIRC_TYPE Bad circuit type ([dec]) from [chars]

Explanation    Bad circuit type (CIRCUIT-TYPE) from SOURCE_IF. This system received an IS-IS hello with a header reporting an invalid circuit type of CIRCUIT-TYPE. This is the result of a mal-formed packet rather than a configuration error. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_HDR_LENGTH The packet header length %zu is invalid for a(n) [chars], (should be [unsigned int]) from [chars]

Explanation    The packet header length (HDRLEN) is invalid for a(n) PDUTYPE, (should be EXPECTED) from SOURCE_IF This system received a PDUTYPE packet from SOURCE_IF claiming a header length of ACTUAL, rather than EXPECTED. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_ID_LENGTH Bad system ID length ([unsigned int], should be 0 or [unsigned int]) from [chars]

Explanation    Bad system ID length (ID-LENGTH, should be 0 or EXPECTED-LENGTH) from SOURCE_IF. This system received a pdu reporting an invalid system ID length of ID-LENGTH. This system only accepts values of 0 and 6 (both indicate 6). The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_MAX_AREA_ADDR Bad max area addresses ([dec], should be 0 or [dec]) from [chars]

Explanation    Bad max area addresses (MAX-AREA-ADDRESSES, should be 0 or EXPECTED-MAX) from SNPA (INTERFACE-NAME). This system received a pdu reporting an invalid number of configurable area addresses. This system only accepts values of 0 and 3 (both indicate 3). The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PAK_LENGTH The length (%zu) reported in the packet buffer is greater than the maximum packet length that IS-IS can receive ([unsigned int])

Explanation    IS-IS has received a packet which is larger than its internal buffers can handle. The packet has been ignored.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider reducing the relevant interface's MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_FORMAT [chars] received from [chars] contains a format error: [chars]

Explanation    IS-IS has received a PDU containing a format error. This indicates that the system which built the PDU is not conforming to the protocol specification. In most cases this is the neighbor, but in the case of LSPs it is the system which generated the LSP. The message contains the type of the PDU, the interface it was received over (and, in the case of a LAN interface, the SNPA), and a description of the format error. IS-IS will not use any of the information contained in this PDU. In the case of an LSP, IS-IS will not flood the LSP to neighbors.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_LENGTH The length (%zu) reported in the [chars] header is greater than the packet length ([unsigned int]) from [chars]

Explanation    The length (PDU_LENGTH) reported in the PDUTYPE header is greater than packet length (PKTLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_VERSION The PDU version reported in the IS-IS header is invalid ([unsigned int], should be [unsigned int]) from [chars]

Explanation    The PDU version reported in the IS-IS header is invalid (VERSION, should be EXPECTED) from SNPA (INTERFACE-NAME) This system received a protocol packet bearing an invalid VERSION in the header. The router originating the packet is either placing the wrong protocol version number in the packet, or else it is running an incompatible version of the IS-IS protocol.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_VERSION Bad protocol version ([dec], should be [dec]) from [chars]

Explanation    Bad protocol version (VERSION, should be EXPECTED-VERSION) from SOURCE_IF. This system received a pdu with an invalid protocol version of VERSION instead of EXPECTED-VERSION. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BGP_CONVERGE Overload bit not set due to failure in registering for BGP convergence: [hex], '[chars]'

Explanation    IS-IS is configured to set the overload bit in its LSPs upon startup and to wait for BGP to converge before resetting the overload bit, but an error has occurred whilst registering for notification of BGP convergence. As a result, the overload bit will not have been set upon startup. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BGP_UNREG_NOTIFY Error unregistering for BGP convergence notification: [hex], '[chars]'

Explanation    IS-IS failed to unregister for notification of BGP convergence. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_ATT_FAIL Failed to register a handler for '[chars]' messages: [chars]

Explanation    IS-IS failed to register a handler for the specified class of event. This is an initialization error and implies that IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_CBACK_ATT_FAIL Failed to register a [chars] callback handler: [chars]

Explanation    IS-IS failed to register a callback handler due to the error. This is an initialization error and implies that the function in IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_CRE_FAIL Failed to create [chars] Event Manager: [chars]

Explanation    IS-IS failed to create an Event Manager to receive events in the specified thread. This is most likely to be caused by a resource starvation problem, but may also be due to an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_SEND_FAIL Failed to send '[chars]' to '[chars]': [chars]

Explanation    IS-IS failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_GET_RESPAWN_COUNT Failed system manager call to fetch respawn, assuming respawned: [hex], '[chars]'

Explanation    A call to system manager to obtain the process respawn count failed. This is a recoverable error, and the count will be assumed to be 1.

Recommended Action    No action is required..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_LSP_DB_CORRUPT L[unsigned int] LSP database checksum verification failed for LSP [chars]. IS-IS will restart itself

Explanation    A corrupt LSP was found during a periodic check of the sanity of the specified level's LSP database. When it encounters this condition the IS-IS process restarts itself to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_LSP_INPUT_Q_OVERFLOW LSP input queue overflow: [unsigned int] total drops; [unsigned int] LSP drops, [unsigned int] SNP drops

Explanation    An incoming LSP or SNP pdu was dropped because the input queue was full

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MEMPOOL_NOMEM Failed to allocate [unsigned int] bytes from '[chars]'

Explanation    IS-IS failed to allocate memory from the specified pool.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MIN_PDU_LENGTH The length (%zu) described in the [chars] header is smaller than the minimum ([unsigned int]) from [chars]

Explanation    The length (PDU_LENGTH) described in the PDUTYPE header is smaller than the minimum (MINLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MIN_PKT_LENGTH The length (%zu) of the [chars] received from [chars] is smaller than the minimum ([unsigned int])

Explanation    The length (PKTLEN) of the PDUTYPE received from the interface SOURCE is smaller than the minimum (MINLEN) This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_CHAN_GLOBAL Error changing a local message channel setting to [chars]: [chars] ([dec])

Explanation    IS-IS failed to convert a local connection channel to a global connection channel. This could be the result of a problem with the channel.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_GET_SCOID Error retrieving client's connection ID to the [chars] channel: [chars] ([dec])

Explanation    IS-IS failed to retrieve its local connection ID for a client attached to the specified channel. This is an internal programming error.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_REPLY Error replying to the client [chars]: [chars] ([dec])

Explanation    IS-IS failed to reply to its client through message channel. This could be a result of channel down or resource allocation failure.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_PCL Unexpected error whilst [chars]: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified using the Route Policy client library. As a result information may be omitted from the local system's LSPs. This may be due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_REG_SHUTDOWN_NOTIFY Failed system manager call to register for shutdown notification: [hex], '[chars]'

Explanation    A call to system manager to register for shutdown notification failed. This is a recoverable error in that shutdown actions are not critical.

Recommended Action    No action is required..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB Unexpected error whilst [chars] the [chars] RIB: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified RIB operation. This may be a resource starvation problem but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_BATCH_SEND Unexpected error sending a batch of [chars] RIB updates ([dec])

Explanation    IS-IS encountered an unexpected error whilst sending a batch of RIB updates to the RIB. This may be a resource starvation problem, or a problem with IS-IS's connection to the RIB, or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_CONN_SETRETRY Error setting the RIB linear retry period: [hex] '[chars]'

Explanation    IS-IS failed to set the linear retry period for connecting to the RIB. This error will not affect IS-IS operation but does indicate an unexpected result.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_LIB Unexpected error whilst [chars]: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified operation using the RIB client library. This may be a resource starvation problem but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_NOTIFICATION Received an unexpected notification with code [unsigned int]

Explanation    IS-IS received an unexpected RIB notification pulse and will ignore it.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_PATH_NOMEM Insufficient memory whilst installing a path to [chars] in the [chars] RIB

Explanation    IS-IS was unable to install a path to the specified network in the RIB because the RIB encountered a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SHOW_PROTO_REG Error registering show protocol information: [hex], '[chars]'

Explanation    IS-IS failed to register for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SYSDB_DISCONNECT Error disconnecting [chars] SysDB connection: [hex], '[chars]'

Explanation    IS-IS failed to disconnect from SysDB. The error will not affect IS-IS operation but does indicate that a programming error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SYSDB_UNREG_NOTIFY Error unregistering for SysDB notification: [hex], '[chars]'

Explanation    IS-IS failed to unregister for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_THREAD_DESTROY Error destroying [chars] thread: [dec]

Explanation    IS-IS failed to destroy a thread. This is an internal error. If the error occurred whilst unconfiguring IS-IS then it may be necessary to forcefully terminate the IS-IS process. If the error occurred during normal operation then it may be necessary to restart the IS-IS process to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_THREAD_SET_NAME Error setting name of thread [dec] to [chars]: [chars] ([hex])

Explanation    An unexpected error occurred whilst setting a thread name. This may be due to resource starvation or an internal programming error. This is not a fatal error as the name is only used for debugging and error messages.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_WDSYSMON_MEM_STATE Unexpected error whilst [chars] for memory state changes: [chars] ([hex])

Explanation    IS-IS encountered an error whilst registering or deregistering with WDSysMon for notifications of changes to the router's memory state. If the error occurs during registration (i.e. when the IS-IS process is initializing) then it will abort and the system may recover automatically when the IS-IS process is restarted. If the error occurs during deregistration (i.e. when the IS-IS process is shutting down) then it is harmless and may be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_BOOL_FAIL Error [chars] the '[chars]' trigger: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error using one of the infrastructure libraries. This may be due to a low memory condition but is more likely to be a programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_ERROR_FAIL Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, IS-IS failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_EVM_HANDLER_FAIL Error registering for data events on '[chars]' connection: [chars]

Explanation    During initialization, IS-IS failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_GET_FD_FAIL Error retrieving the Connection ID from the '[chars]' connection: [chars]

Explanation    IS-IS failed to retrieve the file descriptor associated with the specified service. This is an internal error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_NOTIFY_FAIL Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, IS-IS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_OPEN_FAIL Error opening '[chars]' connection: [chars]

Explanation    IS-IS failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVQ_CRE_FAIL Failed to create the [chars] event queue: [hex], '[chars]'

Explanation    An unexpected error occured whilst creating an event queue during process initialization. This may be a system resource problem. As a result IS-IS will be unable to operate correctly.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EXTRA_AREA_ADDRESSES Area address TLV length [dec] contains more than ISIS_MAX_AREA_ADDRESSES from [chars] ([chars]).

Explanation    Area address TLV length TLV_LENGTH contains more than ISIS_MAX_AREA_ADDRESSES from SNPA_STRING (INTERFACE_NAME). This system recieved a hello or LSP containing more than the maximum number of area addresses. The additional addresses have been ignored.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IDB_CHKPT_CLEANUP Unexpected objid [hex] for [chars] (CSCek33169) collect log and tech-support

Explanation    This is not critical and IS-IS functionality should be unaffected. A non-null OBJID for INTERFACE-NAME was encountered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IIH_TOO_MANY_IF_ADDRESSES [chars] has more [chars] interface addresses than can fit into a single TLV (255 bytes). Outgoing IIHs can only include the first [unsigned int] addresses.

Explanation    The specified interface has more addresses than can be fitted into a single TLV (255 bytes). RFC 1195 specifies that each IIH may contain at most one IPv4 Interface Address TLV, i.e. 63 IPv4 addresses. Thus if there are more than 63 IPv4 addresses configured on the interface then only 63 addresses are included in the IIH. If the interface has a primary address it is always included first. The secondary addresses are added in their natural numerical order until there is no more space. If there is an IS on the LAN which does not share a subnet with any of the advertised addresses then it will not be able to form an adjacency with this IS. This problem should not apply to IPv6 as each interface should have a single link local address.

Recommended Action    Reduce the number of addresses configured on the interface so that they can all fit within a single TLV.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_ATTR_INIT Error initializing the IM attribute library: [hex] '[chars]''

Explanation    IS-IS failed to initialize the IM attribute library. This error will prevent IS-IS from normal operations.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_CAPS_UNKNOWN IM notification received for an unknown and unexpected capsulation number: [unsigned int]

Explanation    IS-IS has received an IM message referring to a capsulation number that IS-IS does not recognized and is not able to handle. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_CB_NAME_TRUNC Interface Manager context name '[chars]' length exceeds string length limit of [dec]; truncated to '[chars]'

Explanation    The length of the context string used to register for Interface Manager callbacks exceeded internal limits and was truncated. If truncation results in registration contexts no longer being unique, this could cause problems with event registrations.

Recommended Action    This should not happen. The condition represents an internal error.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_ADDR_CHG_REG Error during registration for interface IP address changes: [chars]

Explanation    IS-IS failed to register for notification of interface IP address changes. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_ATTR_FAIL Failure while [chars] on [chars]: [hex] '[chars]''

Explanation    A call to the IM attribute library failed. This can be caused by faulty hardware, or it may indicate an interface resource is currently unavailable. Recovery may require a restart of the IS-IS process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CKTNUM_ALLOC_FAIL Failed to allocate circuit ID to interface [chars]: all [dec] IDs already in use

Explanation    IS-IS failed to allocate a circuit ID to the specified LAN interface.

Recommended Action    Reduce the number of LAN interfaces over which IS-IS is running.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_CLIENT_INIT Failed to initialize CLNS interface registery: [chars]

Explanation    IS-IS failed to initialize its interface registration process wth CLNS It requires a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_LPTS_UPDATE Failed to [chars] LPTS entry for interface [chars]: [chars]

Explanation    IS-IS failed to create or remove LPTS entry on the specified interface. It may require a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_MAC_ADDR_NOTIFY Failed to notify CLNS of a MAC address change on interface [chars]: [chars]

Explanation    IS-IS failed to notify the CLNS protocol stack of MAC address changes to the specified interface. It requires a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CONFIG_ERROR Interface [chars] is already configured

Explanation    This is a duplicate configuration received for the same interface. Most likely the previous cleanup (commit replace) or removal of ISIS config was not successful (CSCsy26037/CSCsv89872). ISIS may be in unstable state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Consider restarting the IS-IS process.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_FIND_FAIL Failed to lookup Interface Handle for interface [chars]: [hex] '[chars]'

Explanation    An unexpected error occurred looking up an interface handle from an interface name. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_FWS_INIT Error during initialization of forward-referenced interface store: [chars]

Explanation    IS-IS failed to initialize its storage for forward-referenced interfaces. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_IM_REG_FAIL Registering for [chars] [chars] changes on interface [chars] failed, will retry it: [hex], '[chars]'

Explanation    IS-IS failed to register for notification of the specified changes on the specified interface and protocol. This may happen in case of ifmgr not ready to process the request. For example ifmgr restart. This may be an internal programming error, but is most likely to be a resource starvation problem.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider disabling and reenabling the interface within IS-IS configuration, or restarting the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_INACTIVE_AF Unexpected [chars] [chars] notification on [chars]

Explanation    The specified event was unexpected because the address family is not active on that interface. The operation of IS-IS is not affected by this message and it may safely be ignored. The message is due to an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_IP_ARM_BATCH_UPDATE_FAIL Error [chars] for [chars] address changes on interface [chars]: [hex], '[chars]'

Explanation    IS-IS failed to register with IP-ARM for notification of the address changes on the specified interface and address family. This may be an internal commuincation error, but is most likely to be a resource starvation problem.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider disabling and reenabling the interface within IS-IS configuration, or restarting the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_LAS_FAIL Failed [chars] [chars] link local addresses on [chars]: [hex], '[chars]'

Explanation    An unexpected error occurred whilst accessing the link-local address details for the specified interface. As a result IS-IS will not be able to use the specified address-family on the specified interface. This could be due to a low memory condition or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MAC_SIZE_ERR Incorrect MAC address size for [chars] (returned: [dec], expected: [dec])

Explanation    The MAC address size returned for the specified interface does not match the expected size (6 bytes). This can be caused by a faulty hardware.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MCAST_JOIN_FAIL Joining [chars] multicast group on [chars] failed: [chars], ISIS will retry again

Explanation    IS-IS was unable to join the specified multicast group on the specified interface, Will retry again.

Recommended Action    Restart the affected interface and, if the problem recurs, the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MCAST_SIZE_ERR The multicast address is too large for [chars] (supplied: [dec], maximum: [dec])

Explanation    The multicast address requested for the specified interface is larger than the maximum permissible size. This requires restarting the IS-IS process.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MTU_REDUCED IS-IS MTU value of [unsigned int] on [chars] adjusted to [unsigned int] to accommodate fabric MTU

Explanation    The IS-IS MTU was adjusted to accommodate the fabric MTU of the system. This new MTU may be smaller than the actual MTU allowable by the physical interface.

Recommended Action    Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MTU_TOO_SMALL CLNS MTU value of [unsigned int] on [chars] is too small. Minimum acceptable value is [unsigned int]

Explanation    The MTU for CLNS on the specified interface is too small to allow IS-IS to send packets over that interface. This may be due to a configuration error or an internal error.

Recommended Action    Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_NAME_FAIL Failed to lookup an interface name from its handle ([hex]): [hex], '[chars]'

Explanation    An unexpected error occurred looking up an interface's name from it's handle. The error code should provide an indication of what the problem is. The most likely explanation is that the interface with the specified handle no longer exists although the message may be caused by low memory conditions or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_NSF_MEDIA_MISMATCH Media class mismatch between checkpoint table ([chars]) and reality ([chars]) on interface [chars]

Explanation    IS-IS has detected a mismatch between the media class (i.e. Point to Point vs. LAN) of an interface as determined by IS-IS's checkpoint state and IM. As a result the interface will not participate in the NSF restart. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_PROTECT_INFRA_UPDATE Protect infra [chars] failed for interface [chars]: [hex], '[chars]'

Explanation    IS-IS failed to register or unregister with protect infrastructure for high priority link-down notifications on the specified interface. IS-IS will still react to regular link-down events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_RSI_SRLG_UPDATE RSI SRLG [chars] failed for interface [chars]: [hex], '[chars]'

Explanation    IS-IS failed to register or unregister with RSI for SRLG notifications on the specified interface. IS-IS will reset RSI connection and retry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_STORE_FAIL Error [chars] [chars] [chars] internal [chars] store: [hex], [chars]

Explanation    IS-IS was unable to perform the specified operation on the specified interface. This is most likely to be a resource starvation problem, but may be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_UNKNOWN_MEDIA Unknown or unsupported interface media type ([chars]) on [chars]

Explanation    This interface media is not supported by IS-IS. An IS-IS process restart is required for recovery.

Recommended Action    Check the interface media name in the configuration and restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INVALID_LSP_LIFETIME L[unsigned int] LSP [chars] sn [hex] cs [hex] has invalid remaining life time [unsigned int], max allowed - [unsigned int]

Explanation    IS-IS received invalid value for the remaining LSP life time using the timer library. IS-IS will handle this gracefully by limiting the value to maximum allowed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IP_ARM_ADDR_INFO_FAIL Failed to [chars] for [chars] address information: [hex], '[chars]'

Explanation    IS-IS has encountered an error whilst manipulating a set of interface IP addresses. This may be a resource starvation problem or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ITEMSIZE add_item_entry called with size [dec]: errant entry was not added to the LSP

Explanation    add_item_entry called with size SIZE. An internal error occurred while this system was trying to construct its LSPs. The errant entry was not added to the LSP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-KEY_DEACTIVATE_FAIL Failure to deactivate Key Chain [chars]: '[chars]''

Explanation    A call to the Key Chain library failed. This may indicate an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LINK_TO_SELF Level [unsigned int] LSP [chars] contains a link advertsisement to itself ([chars] MT ID). This link will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a link advertisement to itself and this link has been ignored. There is no possible impact to routing as the link would not be used by other routers in their calculations. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a link.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPCKSUM Bad L[dec] LSP [chars] checksum [hex] received on [chars], length [dec], should be [hex], bad count [dec]

Explanation    Bad L-# LSP LSP-ID checksum ACTUAL-CKSUM received on INTERFACE-NAME, length PDU-LENGTH should be EXPECTED-CKSUM, bad count CKSUM-ERROR-COUNT. This system received a level L-# LSP with a wrong checksum. If the IS-IS configuration option 'isis-ignore-cksum-errors' is set, the packet has been ignored. Otherwise it has been handled according to the specification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPFULL L[unsigned int] LSP filled to capacity, dropping routes

Explanation    L-LEVEL LSP filled to capacity, dropping routes. This system cannot originate any more routes or adjacencies because it cannot build any more LSP fragments in which to advertise them.

Recommended Action    This is usually caused by a misconfiguration, such as redistributing a large number of routes into IS-IS. Reduce the number of routes being redistributed into IS-IS to correct the problem.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPTOOBIG L[dec] LSP [chars] size [dec] bigger than interface [chars] MTU [dec], LSP dropped

Explanation    L-LEVEL LSP LSP-ID size LSP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, LSP dropped. This system was unable to flood an LSP out INTERFACE-NAME because the interface MTU was too small. The LSP has not been transmitted on the interface.

Recommended Action    Configure the routing area and the interfaces with a consistent MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MARTIAN Level [unsigned int] LSP [chars] contains an [chars] prefix advertsisement to the invalid prefix [chars]. This prefix will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a prefix advertisement to an invalid martian prefix and the prefix has been ignored. As the prefix is invalid there should be no impact to routing as no traffic should be destined to the prefix. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a prefix.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MAX_REDIST_PREFIXES Topology [chars] level [unsigned int] is [chars]exceeding the maximum number of redistributed prefixes

Explanation    This configuration is redistibuting more than the allowable number of prefixes into an IS-IS topology. IS-IS will not advertise some of these routes. This is to prevent inadvertant redistribution of the Internet via IS-IS.

Recommended Action    Consider reconfiguring route redistribution into the IS-IS process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MEM_ALLOC_FAIL Failed to allocate %zu bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource. This could be because the IS-IS topology is too large for the memory installed in the router.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MGD_TIMER_FAIL Error [chars] the [chars] [chars] timer: [chars]

Explanation    IS-IS encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_ACCESS_FAIL Failed to [chars] checkpoint record(s) [chars] [chars] table: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was accessing entries in the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. If however the error does not recur then the checkpoint tables should synchronize. The error may be caused by a low memory condition or through programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_INIT NSF checkpoint init failure, [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the checkpoint service for the specified error reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_TABLE_FAIL Failed to [chars] [chars] checkpoint table: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was accessing the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. The error may be caused by a low memory condition or through programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CREATE_FAIL Failed to create L[unsigned int] NSF adjacency to [chars] ([chars]) ([chars])

Explanation    TBD.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_TE_TUNNEL_RESTORE_FAIL Failed to restore L[unsigned int] TE tunnel ([hex]) to [chars] ([chars]) ([hex], [chars])

Explanation    An unexpected error occured whilst recreating TE tunnel from the checkpointed information. NSF may abort.

Recommended Action    Restart the ISIS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-OSI_SOKT_FAIL Socket operation '[chars]' failed: [chars]

Explanation    Failed to perform a socket operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-P2P_CONFIG_MISMATCH L[unsigned int] [chars] configuration on P2P interface [chars] will not be used

Explanation    Any level specific configuration on a P2P interface is ignored. The configuration may be accepted but not used if the interface type is unknown or changed later to point-to-point.

Recommended Action    Configure the same parameter without using any level extension.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-REDIST_FAIL Error [chars] for redistribution of routes from [chars] [chars] into IS-IS

Explanation    The RIB returned an unexpected error when IS-IS attempted to (de)register for the redistribution of routes in the specified topology and owned by the specified protocol. If this is a registration error then routes from the specified protocol may not be advertised in IS-IS's system LSPs. If this is a deregistration error then IS-IS may receive unnecessary redistribution updates from the RIB but the system LSPs will be correctly generated. The problem may be caused by a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS and/or the RIB processes. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-RSI_C_REGISTRATION_FAIL Attempt to register for a VRF failed: [chars] ([hex])

Explanation    IS-IS failed to register for notification of changes to a VRF.

Recommended Action    This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SAMESYSID_DIFFHOST Received self originated LSP with system ID [chars], on interface [chars], differs in hostname; Local hostname [chars], Received hostname [chars]. Please check if this host was connected inadvertently to the network or if the local hostname has been changed.

Explanation    An LSP is received with a System ID same as the local System ID but with a different hostname. This could be happen in the following cases: 1) A new router is introduced into the network with a duplicate system ID as the local router. 2) The local hostname has changed and isis is receiving an old LSP generated with the old hostname.

Recommended Action    If case 1, Check the configuration of other routers in the area for duplicate system IDs. If case 2, Ignore the message.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SEQNUM_WRAP Sequence number wrapped in LSP [chars].

Explanation    An LSP originated by this system has had its sequence number wrap around to 0. The IS-IS specification states that this system should shutdown for 20 minutes waiting for the LSP to age out before resuming routing.

Recommended Action    This condition can only occur if a network has been operational for several years, or if a network has been misconfigured for a long time. Disable the IS-IS routing process for max-lsp-lifetime and then restart it to clear the problem. Alternative approaches include changing the SYSTEM-ID or, if this occurred with a pseudo-node LSP, lowering the priority of the interface.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SETSOCKOPT_FAIL Error setting the value of the '[chars]' IS-IS network socket option to '[chars]' (length [unsigned int]): [chars]

Explanation    IS-IS encountered an error whilst configuring the socket it uses for network I/O. As a result the socket is unuseable and IS-IS cannot perform I/O. IS-IS will attempt to recover by closing the current socket and schedule an attempt to reconnect.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the IS-IS process.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SHOW_NOMEM Internal memory allocation failure, display incomplete

Explanation    The requested display output may be incomplete due to an internal memory allocation problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SHUTDOWN Process is shutting down ([chars]): [chars]

Explanation    IS-IS has encountered a problem which means that is no longer able to continue and so it is shutting down. The message includes a brief description of the problem but will also have been preceded by another message providing a more detailed description of the problem. There are several types of reason why IS-IS may have to shutdown which include a fatal error during process initialization, a fatal problem with a critical service during normal operation, and a roll-over of one of the local system's LSP's sequence numbers. The message also describes whether or not IS-IS has automatically been restarted.

Recommended Action    Follow the instructions associated with the preceding message. If an automatic restart has been scheduled, then IS-IS may recover automatically. If a manual restart is required, then 'process start isis' is required to recover.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SNPTOOBIG L[dec] SNP size [dec] too big for interface [chars] MTU [dec], trimmed to interface MTU

Explanation    L-LEVEL SNP size SNP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, trimmed to interface MTU This system was unable to flood an SNP out INTERFACE-NAME because the LSP MTU setting is too big for the interface MTU. The SNP packet size was trimmed to fit the interface MTU.

Recommended Action    Configure the LSP MTU to a size that will fit within the interface MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-THREAD_SPURIOUS_PULSE Received a spurious pulse in thread [chars] (pulse value: [hex])

Explanation    IS-IS Recevied a spurious (unexpected) pulse value and will ignore it.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-TIMESTAMP_FAIL Error recording a timestamp ([dec])

Explanation    An unexpected error occurred whilst recording a timestamp. This implies an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-UNKNOWN_ADDRESS_FAMILY Unknown address family [unsigned int]

Explanation    IS-IS has encountered an unrecognized address family ID. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-WD_METRIC_NOT_CONF In the topology [chars] [chars] has a wide metric of [unsigned int] but level L[unsigned int] is configured to generate narrow metrics. Maximum narrow value [unsigned int] is used instead

Explanation    The specified interface and topology has been configured with a metric value that requires metric-style wide to be configured for the relevant level.

Recommended Action    Configure metric-style wide for the topology and area.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ZERO_COST_LINK Level [unsigned int] LSP [chars] contains an invalid link advertsisement to [chars] ([chars] MT ID) with a metric of 0. This link will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a link advertisement with an invalid metric of 0. Zero cost links have the potential to break the SPF algorithm and are not permitted by the IS-IS specification (ISO 10589 version 2) and so the IOS-XR router will ignore the link in any subsequent route calculations. As a result traffic which should be routed via the affected routers may be dropped or enter a routing loop.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ZEROHOLDTIME IIH zero holdtime from [chars]

Explanation    IS-IS has received an IIH containing a zero holdtime from a neighbor with which no adjacency currently exists. The IIH has been discarded. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-5-ADJCHANGE Adjacency to [chars] ([chars]) ([chars]) [chars], [chars]

Explanation    Adjacency to SYSTEM-ID (INTERFACE-NAME) Up|Down, REASON. The adjacency to the system with SYSTEM-ID has gone up or down due to REASON.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-5-AUTH_COMPUTE_FAILED Key Chain digest computation for [chars] failed due to [chars]

Explanation    The process encountered an error when computing the authentication digest. This may be due to misconfiguration on the local or remote system. It is possible that no currently valid keys are available.

Recommended Action    Check the password and authentication configurations on the local system.

Error Message     
 
    
    
   

%ROUTING-ISIS-5-AUTH_FAILURE_DROP Dropped [chars] from [chars] due to [chars]

Explanation    The process encountered an error when authenticating an incoming PDU and dropped the PDU. This may be due to misconfiguration on the local or remote system.

Recommended Action    Check the password configuration on the local and remote systems.

Error Message     
 
    
    
   

%ROUTING-ISIS-5-AUTH_VERIFY_FAILED Key Chain digest verification for incoming [chars] failed due to [chars]

Explanation    The process encountered an error when verifying the authentication digest. This may be due to misconfiguration on the local or remote system. It is possible that no currently valid keys are available or the remote system is using an invalid authentication key.

Recommended Action    Check the password and authentication configurations on the local system.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-ADJNSF [chars] L[unsigned int]: Neighbor [chars] [chars]

Explanation    The adjacency on the INTERFACE-NAME and LEVEL with the system SYSTEM-ID STARTED responding or STOPPED responding during the NSF-restart of the SYSTEM-ID.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-ATOMIC_RING_FULL [chars] queue is full.

Explanation    The atomic ring for the indicated queue is full.

Recommended Action    If the situation persists investigae whether there is resource starvation occurring.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-DBG_UNKNOWN_TRACEPOINT_NAME Unknown debug filter tracepoint name [chars]

Explanation    An unknown tracepoint name requested for a debug filter.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-ERR_DUPID Duplicate System ID [chars] already used by [chars] detected in IIH received on [chars]

Explanation    IS-IS has received an IIH from a router claiming to have the same System ID as either the local system or another station on a LAN interface. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received. It also indicates whether we ourselves use this system ID, or the SNPA of the other station using the system ID.

Recommended Action    Duplicate system IDs are usually the result of misconfiguration or a bridging loop in the network. Configure each router with a unique system ID, and ensure that there are no bridging loops in the network.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVENT_CONN_DESTROY_FAIL Error destroying '[chars]' connection: [chars]

Explanation    During process termination IS-IS failed to destroy a connection to a service provided by another process. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVENT_ERR Event handler error [dec]

Explanation    Event handler error ERRNO. This system encountered an error ERRNO trying to get an event from the event handler.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVQ_DESTROY_FAIL Failed to destroy the [chars] event queue [hex]: [hex], '[chars]'

Explanation    An unexpected error occured whilst destroying an event queue. This is an internal programming error, but will not affect protocol operation as it occurred whilst IS-IS was destroying resources which are no longer required.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-6-FAIL_ADJADD Failed to create adjacency for [chars] ([chars]): [chars]

Explanation    Failed to create adjacency to the displayed IS via the displayed interface for the reason specified.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-IIH_IF_ADDRESS IIH received from [chars] contains [chars] [chars] interface address: [chars]

Explanation    IS-IS received an IIH from the specified source containing an invalid and potentially unusable interface address for the specified address family. The message contains details of why the interface address is invalid. The message implies that the router sending the bad IIH is either misconfigured or is not conforming to the IS-IS specification. If the message describes the address as unusable, then IS-IS is not able to use the adjacency as a next hop for the specified address family. Otherwise IS-IS will still attempt to use the adjacency as a next hop.

Recommended Action    Using the contents of the error message as a guide, check the configuration of the router sourcing the IIH or contact the router's vendor.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_ABORTED [chars] controlled start aborted. Reason: [chars]

Explanation    Startup state-machine controlled startup aborted for the specified reason. Some of the reasons indicate an internal software error, or the failure of anther software service. Other reasons are due to configuration or other operational problems. Finally NSF restart may abort due to no adjacencies being restored, if there were in fact no adjacencies present prior to restart/switchover then this is expected behavior.

Recommended Action    If the indicated reason can be corrected with configuration changes, then do so; otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_FINISH [chars] controlled start completed

Explanation    Startup state-machine controlled startup process ends here.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_FORCED_COLD Resorting to cold start: [chars].

Explanation    The startup state-machine has determined that a cold (re)start must be performed regardless of current NSF configuration for the reason specified.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_START [chars] controlled start beginning

Explanation    Startup state-machine controlled startup process begins here.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INTF_MAC_ADDR_CHG_INVALID MAC address change notification received for P2P interface: [chars]

Explanation    IS-IS received MAC address change notification for non LAN interface. ISIS ignores the notification. The message is only informational.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-NO_INPUTBUF Unable to allocate input buffer

Explanation    This system failed to allocate an input buffer because there was insufficient memory to do so.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_CREATEMQ Error in creating message queue to MPLS

Explanation    The process failed to create a message queue to communicate with MPLS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_MSG Error in reading message: [chars]

Explanation    The process failed to read the message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_MSGLEN Error in reading message length: [chars]

Explanation    The process failed to read the message length.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_RCV_PAKTYPE Invalid IS-IS packet type [unsigned int] received on [chars] ([chars] code)

Explanation    An invalid packet was received on the specified interface (and, in the case of a LAN interface, SNPA). The packet is invalid because its type code is either unrecognized or inappropriate (e.g. a point to point IIH on a LAN interface). The packet has been ignored.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_RECV_TE_MSG Received an invalid length TE message for [chars]: expected ([unsigned int]), received ([unsigned int])

Explanation    The process has received an invalid length TE message. As a result, the TE message is ignored and TE tunnel may not come up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_RECV_TE_MSG_VERSION Received an invalid version of TE message for [chars]: ([unsigned int])

Explanation    The process has received a TE message with an incompatible version. As a result, the TE message is ignored and TE tunnel may not come up.

Recommended Action    Collect output from 'show tech-support mpls traffic-eng'. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_SEND_TE_MSG Failed to send a [chars] message to TE

Explanation    The process encountered an error while sending message to TE.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-STALE_PNODE_PURGE Skipping stale purge event for L[dec] LSP [chars] pseudo-node

Explanation    The router has re-elected itself DIS after initiating a purge of its L-LEVEL LSP LSP-ID due to a previous resignation.

Recommended Action    No action is required.

LDP Messages

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_BACKEND Backend scan failed for '[chars]': [chars]

Explanation    LDP failed backend scan for some tuple path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_GENERAL [chars]

Explanation    A general error occurred within LDP. The details appear in the output.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_INIT_SYNC_MISSING_SOCK Init Sync Done: Missing Pending Socket([chars])

Explanation    Received Init Sync Done notification but socket wasn't in pending database.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_LPTS_FILT Failed to [chars] LPTS filter for local [chars] remote equals [chars]: [chars]

Explanation    Installation of LPTS filters for targeted LDP neighbors failed. This failure can prevent sessions to LDP targeted neighbors from being established.

Recommended Action    Verify the number of targeted neighbors, either configured or L2VPN. Check 'show lpts pifib..' for statistics and limits.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_LSD_INTF LSD Intf-[chars] failed for [chars] (ifh [hex]): [chars]

Explanation    LDP encountered some problem while trying to enable/disable MPLS on an interface via LSD server.

Recommended Action    Make sure that LSD is running and LDP is connected/registered with it.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_LSD_REG LSD application registration failed: [chars]

Explanation    LDP encountered a problem while trying to register with LSD server.

Recommended Action    Make sure that LSD is running and LDP is connected to it.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_TCP_ENQUEUE_MSG_INVALID_TX_CTX TCP: Msg Enqueue Failed: Invalid Tx Ctx.

Explanation    Msg was enqueued with non-NULL tx ctx when NSR is disabled.

Recommended Action    Remove source of transmit.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_TCP_ENQUEUE_MSG_NOT_ACTIVE TCP: Msg Enqueue Failed: Node isn't active.

Explanation    Standby Node tried to transmit LDP message.

Recommended Action    Remove source of transmit.

Error Message     
 
    
    
   

%ROUTING-LDP-3-INCONSISTENCY An internal inconsistency was detected:[chars]

Explanation    LDP has detected an internal inconsistency. Please capture a core file for analysis.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-NSR_ACK_CHK_FAILED NSR ACK CHK failed: [chars]; count [dec]

Explanation    NSR ACK CHK failed. Please perform show mem heap for analysis.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-NSR_IPC_TRANSPORT_FAILURE Repeated internode transport failures, re-initiating NSR sync

Explanation    LDP encountered too many consecutive transport errors while trying to send NSR messages which triggers NSR sync again.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-NSR_PEER_SYNC_RX_ERR Peer [chars]; op equals '[chars]'; [chars]

Explanation    Standby LDP instance encountered an error during processing of NSR synchronization data sent by Active LDP instance.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-BAD_PDU_LENGTH A message with botched PDU length is received from peer [chars]

Explanation    A message with botched PDU length is received from the network.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-BAD_TLV TLV Check failed for a message (type [hex]) received from peer [chars]

Explanation    A message with a bad TLV is received from the network.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-CAP_CHANGE LDP session(s) being reset to propagate LDP capability changes

Explanation    A capability was installed/updated/uninstalled by an LDP client. LDP peers will not learn of the change until the LDP session has been reset.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-LDP-4-CAP_CHANGE_DYNAMIC LDP session(s) reset required to propagate capability change of '[hex] ([chars])' to peers that do not support Dynamic Announcement capability

Explanation    A capability was installed/updated/uninstalled by an LDP client. LDP peers that don't support Dynamic Announcement will not learn of the change until the LDP session has been reset.

Recommended Action    Use the 'show mpls ldp neighbor capability' command to determine which neighbors need to be reset. Reset LDP neighbor using the 'clear mpls ldp neighbor ...' command.

Error Message     
 
    
    
   

%ROUTING-LDP-4-DEPRECATED_RTRID 'router-id interface command is deprecated. Delete 'router-id [chars]' and reconfigure 'router-id ip_addr'.

Explanation    MPLS LDP 'router-id interface' command is deprecated.

Recommended Action    Use 'router-id ip_addr'.

Error Message     
 
    
    
   

%ROUTING-LDP-4-DISCOVERY_SLIP CPU load or blockage caused latent tx of UDP discovery to [chars]: interval equals [dec] sec, expected equals [dec] sec. Hold equals [dec] sec

Explanation    Heavy CPU load or process blockage resulted in slip of discovery transmission. Possibly resulting in session/adjacency flap.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-DUP_ADDR_RCVD Duplicate Address [chars] advertised by peer [chars] is already bound to peer [chars]

Explanation    LDP received an Address advertisement for an address from a peer, but the address is already bound to a different peer.

Recommended Action    Fix the misconfiguration in the network.

Error Message     
 
    
    
   

%ROUTING-LDP-4-DUP_ADDRS [dec] Duplicate address(es) advertised by more than one peer

Explanation    LDP peer address database has some duplicate addresses which are received from (and hence bound to) more than one peer. The presence of one or more duplicate address confuses LDP control plane and may lead to potential traffic blackholing due to unlabelled forwarding path setup for paths using this address as the nexthop IP address.

Recommended Action    Find all peers duplicate addresses present in the network by running 'show mpls ldp neighbor detail' command, and then fix the misconfiguration in the network.

Error Message     
 
    
    
   

%ROUTING-LDP-4-MAX_DISC_NBRS Rejecting LDP adjacency ([chars]): Exceeded maximum ([dec]) number of discovered neighbors.

Explanation    Discovered more neighbors than supported. This may lead to non-deterministic set of established sessions on restart and bootup.

Recommended Action    Reduce the scale of peers attempting to establish sessions with this router

Error Message     
 
    
    
   

%ROUTING-LDP-4-MAX_NEIGHBORS Rejecting LDP neighbor ([chars]): Reached maximum ([dec]) number of neighbors supported.

Explanation    Reached maximum number of neighbors supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-TX_KEEPALIVE_SLIP CPU load or blockage caused latent tx of LDP keepalive to [chars]: interval equals [dec] sec, expected equals [dec] sec. Hold equals [dec] sec

Explanation    Heavy CPU load or process blockage resulted in slip of discovery transmission. Possibly resulting in session.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-5-ADJ_CHANGE Adjacency ([chars]) [chars] with Nbr [chars] [chars] [chars]

Explanation    A LDP adjacency has changed state (up/down). If adjancency has went down, then a reason for adjacency going down is also displayed. This message appears only if the log adjacency command is configured for the LDP process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR GR session [chars] (instance [dec]) [chars]

Explanation    An LDP GR session state change has occured - such as disconnected, reconnected, timed out, and cleaned up. This message appears only if the log graceful-restart command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR_ABORT GR session [chars] (instance [dec]) GR being aborted (reason: [chars])

Explanation    GR is being aborted on an LDP GR session under recovery. This means that current GR [recovery] is aborted and any pending GR state is cleanedup. The next time session connects as new GR session. The reason for aborting GR on the session helps in finding the trigger for this abort. This message appears only if the log graceful-restart command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR_ID_CHANGE GR session [chars] identifier changed to [chars]

Explanation    A previously known GR peer has reconnected with a new ldp-id.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR_RESTART_COMPLETE GR forwarding state hold timer has expired

Explanation    After LDP local restart, LDP GR forwarding state hold timer has expired, and MPLS forwarding is now being updated and reinstated by LDP application. This message appears only if the log graceful-restart command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NBR_CHANGE Neighbor [chars], [chars] [chars]

Explanation    A LDP neighbor has changed state (up/down). If neighbor has went down, then a reason for session going down is also displayed. This message appears only if the log neighbor command is configured for the LDP process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NSR_SYNC_DONE Initial synchronization successfully done for [dec] peers

Explanation    LDP Non-stop routing initial-sync event has completed successfully for some or all peers. This message appears only if the mpls ldp log nsr command is configured.

Recommended Action    If number of peers do not match the number of peer for SYNC_START, then Check LDP logs and traces to see why not all attempted peers were successfully synced.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NSR_SYNC_LOST Global synchronization lost

Explanation    LDP Non-stop routing synchronization lost with the standby node. This message appears only if the mpls ldp log nsr command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NSR_SYNC_PEER_DONE Peer [chars] initial synchronization done

Explanation    LDP Non-stop routing peer initial-sync event has completed successfully. This message appears only if the mpls ldp log nsr command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NSR_SYNC_PEER_LOST Peer [chars] synchronization lost

Explanation    LDP Non-stop routing synchronization lost for the peer. This message appears only if the mpls ldp log nsr command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NSR_SYNC_START Initial synchronization started for [dec] peers

Explanation    LDP Non-stop routing initial-sync event has been started for all eligible peers. This message appears only if the mpls ldp log nsr command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-SESSION_PROTECTION [chars] for peer [chars]

Explanation    An informational LDP notice was generated for a Session Protection event.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-SHUTDOWN LDP process is shutting down due to '[chars]' memory state.

Explanation    LDP process exiting due to unknown/critical node memory state.

Recommended Action    Start 'mpls_ldp' process after memory state goes normal.

Error Message     
 
    
    
   

%ROUTING-LDP-6-ISYNC_CHKPT_LIMIT Limit reached for maximum ([dec]) number of neighbors per interface

Explanation    LDP checkpointing has limit for maximum number of neighbors per interface due to LDP IGP Sync feature requirements. It is not recommended to cross the limit provided by Engineering. If crossed, undesired affects can be seen and LDP IGP Sync feature may not work.

Recommended Action    Limit number of neighbors to the value as provided in Engineering guidelines

Error Message     
 
    
    
   

%ROUTING-LDP-7-ERR_INIT '[chars]' ([chars])

Explanation    An internal system error occurred during initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-7-ERR_INIT_FATAL Failed to initialize '[chars]': [chars]: Process now terminating

Explanation    A fatal error occurred during initialization of an LDP subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LMRIB_API Messages

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-3-ASYNC_ERR Asynchronous error: [chars]

Explanation    'An unhandled asynchromous error occurred in the LMRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-3-CORRPT Corrupted update: [chars]. (expected [dec] bytes, got [dec] bytes)

Explanation    'A corrupted update was received from the LMRIB by the LMRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-3-GEN_ERR [chars]

Explanation    Error occurred in lmrib client lib.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-3-GENINITFAIL Initialization failed: [chars] [chars]

Explanation    Error occurred at client initialization.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-3-RPC_FAIL RPC failure: [chars]

Explanation    'An RPC-related error occurred in an RPC call from the LMRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LMRIB_API-7-ASYNC_WAR Warning: [chars]

Explanation    'A recoverable error condition occurred in the LMRIB API'

Recommended Action    No action is required.

LSPV Messages

Error Message     
 
    
    
   

%ROUTING-LSPV-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-4-show_timeout [chars]

Explanation    It was not possible to obtain the lock required to access the databases. This may be due to the main thread being very busy processing events.

Recommended Action    Wait a few minutes, and re-attempt to issue the show command.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_EVENT [chars] failed: error equals [hex] ([chars])

Explanation    Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_GENERAL [chars] failed: error equals [hex] ([chars])

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_INIT Failed to init '[chars]'. Process now terminating

Explanation    Initialization of some subsystem failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_INIT_RC Failed to init '[chars]': error equals [hex] ([chars]). Process now terminating

Explanation    Initialization of some subsystem failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_TIMER [chars] failed: error equals [hex] ([chars])

Explanation    Some error occured in operations with mdg timers. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFWD_MA Messages

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-CFG_ERR [chars] cfg counter already 0. Can't decrement : Item is [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_DEBUG_INIT_EVENT Failed to initialize and chain together the debug event discriptors : [chars]

Explanation    An error related to the debugging subsystem occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_DEBUG_REG Sysdb registration for debug config failed : [chars]

Explanation    An error related to the debugging subsystem occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_CREATE Event connection create for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_NOTIFY Event connection notify for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_OPEN Event connection open for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CREATE Cannot create event manager : [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_IMC_CONTROL_SERVER_BIND Error in imc control server bind : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_LTRACE_INIT [chars] : [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_MEM_ALLOC [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_MEM_FAIL [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_MEM_FAIL_1 [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_REG Cannot register bags : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BIND Error in sysdb bind : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_EDM_FNS_INIT SysDB Oper - [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_EDM_REG SysDB Oper - [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_REG_VERIFY SysDB operation [chars] failed: [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_VRFN_FNS_INIT SysDB operation [chars] failed: [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-GEN_ERR [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-GENINITFAIL Initialization failed: [chars] [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-IDB_ERR [chars] failed for [chars] [[hex]] : [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-IM_UPDATE_IDB_HANDLE_MISMATCH idb [chars] has handle [[hex]], IM update has [[hex]]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-MISC_ERR [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MLDP_POLICY Messages

Error Message     
 
    
    
   

%ROUTING-MLDP_POLICY-3-ORA_ERR Failed to build ORA [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MLDP Messages

Error Message     
 
    
    
   

%ROUTING-MLDP-5-BRANCH_ADD [chars], Add [chars] branch [chars]

Explanation    A mLDP branch has been added.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MLDP-5-BRANCH_DELETE [chars], Delete [chars] branch [chars]

Explanation    A mLDP branch has been deleted.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MLDP-5-BRANCH_MODIFY [chars], Modify [chars] branch [chars]

Explanation    A mLDP branch has been modified.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MLDP-5-DISABLED MLDP is disabled

Explanation    MLDP has been disabled by configuration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MLDP-5-ENABLED MLDP is enabled

Explanation    MLDP has been enabled by configuration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MLDP-7-INIT_FAIL Failed to initialize MLDP

Explanation    A fatal error occurred during initialization of MLDP subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MOFRR_FLOW Messages

Error Message     
 
    
    
   

%ROUTING-MOFRR_FLOW-3-WD_OOR_GREEN Total number of MoFRR enabled multicast routes is no longer at maximum ([unsigned int]).

Explanation    By removing the over-configured MoFRR routes, the total number of MoFRR enabled flows is being reduced. When the total number is first time reduced to exactly 75% of maximum supported (1024) MoFRR routes of current release, i.e., 768 routes, this message will be printed on the console and only once.

Recommended Action    None

Error Message     
 
    
    
   

%ROUTING-MOFRR_FLOW-3-WD_OOR_RED Total number of MoFRR routes has reached maximum ([unsigned int]). MoFRR will not be supported on new routes.

Explanation    Currently ASR9K supports maximum 1024 flows which are guaranteed to have traffic switchover time within 50 ms. In addition, a line card encounters HW out-of-resource condition when the total number of MoFRR routes reaches 2048 MoFRR routes. Thus, any new configured 'MoFRR' beyond 1024 flows are not supported.

Recommended Action    1) Remove All Unsupported MoFRR Routes: (a) Remove all 'unsupported' MoFRR routes configured beyond existing 1024 MoFRR routes in the platform. (b) This step must be done first to recover back to normal state. 2) Modifying MoFRR ACL: (a) Modify the MoFRR ACL to be more specific to match a smaller set of flows which are planed for MoFRR feature. 3) Check Total Configured MoFRR Flows: (a) Use show mfib hardward route summary location location to check currently total number of MoFRR routes configured in the platform. Note that, current release supports maximum 1024 MoFRR routes.

MPLS_ALM Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_ALM-7-ERR_GENERAL [chars] : [chars]

Explanation    An internal system error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_FWD Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-2-NO_MEM No memory for '[chars]'

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-3-ERR_GENERAL [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-3-EVENT_ERR [chars] failed: [chars]

Explanation    Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_FWD-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_HW Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR [chars]. Error equals [chars] (errno equals [dec]).

Explanation    There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_TLU_ALLOC [chars]. Error equals [chars] (errno equals [dec]).

Explanation    Hardware memory allocation for table lookup unit (TLU) failed. This can be because the system has more forwarding entries than supported limits or there is a software defect.

Recommended Action    Please collect output of show tlu server summary [egress/ingress] loc to see why the line card is running out of forwarding entries. Then try to reduce the entries if possible. Copy the error message and report to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_TLU_WRITE [chars]. Error equals [chars] (errno equals [dec]).

Explanation    Hardware memory write for table lookup unit (TLU) failed. This can because 1) connection to mipc lost. 2) mipc/metro problem.

Recommended Action    Please collect output of show pse ipc clinet-connection all loc and show asic-errors pse [0|1] all loc . Copy the error message and report to technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-2-ERROR_WITH_LABEL [chars]. Error equals [chars] (errno equals [dec]). Out label equals [dec].

Explanation    There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-6-INFO [chars]. Error equals [chars] (errno [dec]).

Explanation    There was an internal failure that may impact non-essential system function.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_HW-6-INFO_WITH_LABEL [chars]. Error equals [chars] (errno [dec]). Out label equals [dec].

Explanation    There was an internal failure that may impact non-essential system function.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

MPLS_IMC_CLIENT Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_IMC_CLIENT-3-ERR_IMC MPLS LIB IM client could not register for debugging ([chars])

Explanation    MPLS LIB IM client library failed to register for debugging.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_IO Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-3-ERR_MEM_ALLOC [chars] failed :[chars]

Explanation    Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-6-ERR_GENERAL [chars]: [chars]

Explanation    Some informational message with cerrno.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_IM [chars] failed: [chars]

Explanation    Some error occurred in operations with IM. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_PAK [chars] failed: [chars]

Explanation    Some error occurred in Packet (IP/MPLS/ICMP) related operations. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_TIMER [chars] failed for '[chars]': [chars]

Explanation    Some error occurred in Managed Timer related operations. The text of the message displays the failed operation and the related timer construct with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_WAVL [chars] failed (tree equals [chars]): [chars]

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_LCAC Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_LCAC-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex.
Aborting show request. Please try again. If this problem persists,
please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_LCAC-7-ERR_INTERNAL [chars]

Explanation    An internal system error occured.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

MPLS_LSD_CLIENT Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD_CLIENT-4-ERR_CLIENT_API_CALL_NOTCONN Attempted a LSD client API call ([chars]) while not connected

Explanation    LSD client was not connected and an lsd client api was called.

Recommended Action    Collect LSD traces

MPLS_LSD Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating

Explanation    MPLS LSD terminated due to lack of memory for a critical operation.

Recommended Action    The system is running under very low memory condition. Collect MPLS LSD traces and restart mpls_lsd process

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-3-BCDL_INIT_FAILED [chars]

Explanation    Obituary Call to reinitialize bcdls has been unsuccessful.

Recommended Action    Collect LSD traces

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-3-ERR_INVALID_THREAD Callback from ENS on incorrect thread, actual/expected equals [dec]/[dec] (CSCsd51829)

Explanation    Detected single-threaded mpls-lsd code running on an unknown thread. This concurrency can result in corruption.

Recommended Action    Collect LSD traces

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-3-MULTI_IP_FPI_RW [chars]

Explanation    Rewrite creation or modification failed due to presence of multiple IP route elements.

Recommended Action    Collect LSD traces

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_CHKPT Invalid label provided by Checkpoint ([dec])

Explanation    MPLS LSD on Standby failed to add invalid label provided by CHeckpoint.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_CLIENT_FAULT [chars]

Explanation    Client error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_GENERAL [chars]

Explanation    Miscellaneous MPLS LSD error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_INIT Initialization of MPLS LSD failed, op equals '[chars]' ([chars])

Explanation    MPLS LSD failed to initialize for the reason displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_RCC_INIT Initialization of RCC [chars] library for MPLS LSD failed, (error: [chars])

Explanation    MPLS LSD failed to initialize RCC library for the reason displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_NETIO Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-5-CLEAR_MAPPING_FAILED control clear mapping for [chars] mpls proto [dec] failed [chars]

Explanation    MPLS could not clear control mapping for underlying protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-5-SET_MAPPING_FAILED control set mapping for [chars] to [hex]/[hex] mpls proto [dec] failed [chars]

Explanation    MPLS could not set control mapping for underlying protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-7-BAD_ARP_DROP Pkt([pointer]) with no nexthop in HSSD, output interface - CH[hex]. MPLS label stack:[chars]. IP info:[chars]. HSSD info:[chars].

Explanation    MPLS slowpath got a packet for which ARP needs to be done, but, it doesn't have the nexthop needed. The pkt is dropped.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-7-ERR_GENERAL [chars] FAILED: [chars]

Explanation    Some miscellaneous error occured. The text of the message explains the err/warning and traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-4-ERR_MEM_ALLOC Memory allocation failed for [chars]

Explanation    Allocation of memory failed.

Recommended Action    Add more memory.

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-6-ERR_CONN Connection to the [chars] failed ([chars])

Explanation    MPLS static process could not connect with a manager.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-7-ERR_INIT Initialization of MPLS Static failed - [chars] ([chars])

Explanation    Initialization of the MPLS Static process failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_TE_SLSP Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_TE_SLSP-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex.
Aborting show request. Please try again. If this problem persists,
please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

MPLS_TE Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-CALLBACK_WRONG_THREAD A callback ([chars]) has been received in the wrong thread (%zu, should be in [unsigned int]). The callback has not been handled.

Explanation    A callback from the IOX-XR infrastructure was not handled by the MPLS-TE process because it was received in the wrong thread. The TE process may now be in an inconsistent state with the rest of the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The te_control process may be restarted in order to recover from this situation.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-CALLBACK_WRONG_THREAD A callback ([chars]) has been received in the wrong thread ([unsigned int], should be in [unsigned int]). The callback has not been handled.

Explanation    A callback from the IOX-XR infrastructure was not handled by the MPLS-TE process because it was received in the wrong thread. The TE process may now be in an inconsistent state with the rest of the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The te_control process may be restarted in order to recover from this situation.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-CHKPT_XFORM_INVALID_DIR TE checkpoint translation received an invalid translation direction: [unsigned int]

Explanation    The TE checkpoint table translation library was invoked with an invalid translation direction.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-CONSISTENCY_CHECK '[chars]' had a value of '[chars]', which did not match the expected value '[chars]'.

Explanation    A software bug when an internal data consistency check failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_BKP_ID_LIMIT_EXCEEDED Auto-tunnel backup creation failed because ID pool limit of [dec] exhausted

Explanation    The creation of the auto-tunnel backup aborted since all IDs in the auto-tunnel backup ID range have already been allocated.

Recommended Action    Increase the auto-tunnel backup ID range or remove unused auto-tunnel configuration.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_BKP_TUN_DEST_LIMIT_EXCEEDED Auto-backup tunnel [dec] creation failed because maximum tunnel destination limit [dec] exhausted

Explanation    The creation of the auto-tunnel backup aborted since it would have exhausted the tunnel destination scale limit

Recommended Action    Reduce configured/auto tunnels to below the system scale limit

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_BKP_TUN_LIMIT_EXCEEDED Auto-backup tunnel [dec] creation failed because maximum tunnel interface limit [dec] exhausted

Explanation    The creation of the auto-tunnel backup aborted since it would have exhausted the tunnel interface scale limit

Recommended Action    Reduce configured/auto tunnels to below the system scale limit

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_MESH_ID_LIMIT_EXCEEDED Auto-mesh tunnel (destination [chars] in mesh group [dec]) creation failed because tunnel ID range limit of [dec] exhausted

Explanation    The creation of the auto-mesh tunnel aborted since all tunnel IDs in the range have already been allocated.

Recommended Action    Increase the auto-tunnel mesh tunnel range or remove unused auto-mesh tunnels.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_MESH_TUN_DEST_LIMIT_EXCEEDED Auto-mesh tunnel [dec] (destination [chars] in mesh group [dec]) creation failed because maximum tunnel destination limit [dec] exhausted

Explanation    The creation of the auto-mesh tunnel aborted since it would have exhausted the tunnel destination scale limit

Recommended Action    Reduce configured/auto tunnels to below the system scale limit

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_AUTO_TUN_MESH_TUN_LIMIT_EXCEEDED Auto-mesh tunnel [dec] (destination [chars] in mesh group [dec]) creation failed because maximum tunnel interface limit [dec] exhausted

Explanation    The creation of the auto-mesh tunnel aborted since it would have exhausted the tunnel interface scale limit

Recommended Action    Reduce configured/auto tunnels to below the system scale limit

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_IM MPLS TE encountered error [chars] while [chars] via the Interface Manager

Explanation    Interface Manager returned an error during a tunnel interface operation. The system internal tunnel status might now be inconsistent which might prevent the tunnel from coming up or traffic flowing over this tunnel to be dropped.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. 1. To determine if the system is in an inconsistent state following this error, verify the TE tunnel is present in: configuration, TE and Interface Manager: -show run interface tunnel-te n -show mpls traffic-eng tunnels n -show interfaces tunnel-te n If the tunnel is present in some of these commands but not in others, the system is in an inconsistent state. 2. Collect: -show configuration commit failed -show logging -show tech-support mpls traffic-eng -show tech-support pfi for further analysis of the issue. 3. The te_control process may be restarted in order attempt recovery from this situation.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_IM MPLS TE encountered error [chars] while [chars] via the Interface Manager

Explanation    Interface Manager returned an error during a tunnel interface operation. The system internal tunnel status might now be inconsistent which might prevent the tunnel from coming up or traffic flowing over this tunnel to be dropped.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. 1. To determine if the system is in an inconsistent state following this error, verify the TE tunnel is present in: configuration, TE and Interface Manager: -show run interface tunnel-te n -show mpls traffic-eng tunnels n -show interfaces tunnel-te n If the tunnel is present in some of these commands but not in others, the system is in an inconsistent state. 2. Collect: -show configuration commit failed -show logging -show tech-support mpls traffic-eng -show tech-support pfi for further analysis of the issue. 3. The te_control process may be restarted in order attempt recovery from this situation.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_INTERNAL_CHECK [chars](): line [unsigned int]: [chars]

Explanation    An inconsistency in internal state was detected.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_INTERNAL_CHECK [chars](): line [unsigned int]: [chars]

Explanation    An inconsistency in internal state was detected.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_INTERNAL_CHECK_RC [chars](): line [unsigned int]: [chars]: error [chars] ([hex])

Explanation    An inconsistency in internal state was detected.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_INTERNAL_CHECK_RC [chars](): line [unsigned int]: [chars]: error [chars] ([hex])

Explanation    An inconsistency in internal state was detected.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_LMRIB_LABEL_RW [chars] failed for Tunnel [dec] (LSP ID: [dec], Source: [chars], PHOP: [chars], NHOP: [chars], Label: [unsigned int], Role: [chars]) [error: [dec], [chars]]

Explanation    A LMRIB Label Rewrite related error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_LMRIB_LABEL_RW [chars] failed for Tunnel [dec] (LSP ID: [dec], Source: [chars], PHOP: [chars], NHOP: [chars], Label: [unsigned int], Role: [chars])

Explanation    A LMRIB Label Rewrite related error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_LMRIB_TUNNEL_RW [chars] failed for [chars] (LSP ID: [dec], Label: [unsigned int])

Explanation    A LMRIB Tunnel Rewrite related error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_LMRIB_TUNNEL_RW [chars] failed for [chars] (LSP ID: [dec], Label: [unsigned int]) [error: [dec], [chars]]

Explanation    A LMRIB Tunnel Rewrite related error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_MEM_ALLOC Memory allocation failed for [chars]

Explanation    Allocation of memory failed.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_MEM_ALLOC Memory allocation failed for [chars]

Explanation    Allocation of memory failed.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_BAG_DECODE [chars]: [chars]: [chars]

Explanation    A Bag related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_BAG_DECODE [chars]: [chars]: [chars]

Explanation    A Bag related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_DELETE [chars]: [chars]: [chars]

Explanation    A SysDB free related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_DELETE [chars]: [chars]: [chars]

Explanation    A SysDB free related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_GET [chars]: [chars] failed for path [chars] : [chars]

Explanation    A sysdb error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_GET [chars]: [chars] failed for path [chars] : [chars]

Explanation    A sysdb error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_TRACE_INIT Traffic-eng event tracing subsytem initialization failed

Explanation    Traffic-eng could not initialize the tracing module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_TRACE_INIT Traffic-eng event tracing subsytem initialization failed

Explanation    Traffic-eng could not initialize the tracing module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-NONRESPONSIVE_CLIENT Client '[chars]' has not processed an update [dec] seconds after being notified. Forcing reconnect. PID equals [dec],

Explanation    TE server is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.

Recommended Action    Collect 'show processes pidin location loc-name' to find out the unresponsive client. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-GMPLS_NNI_DEPRECATED GMPLS NNI support, including this command, will be removed in release 4.3.0

Explanation    GMPLS NNI support, including this command, will be removed in release 4.3.0.

Recommended Action    Please do not use GMPLS NNI configurations and commands anymore.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex. Aborting show request. Please try again. If this problem persists, please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex. Aborting show request. Please try again. If this problem persists, please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHUTDOWN Process is shutting down ([chars]): [chars]

Explanation    TE process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not TE process has automatically been restarted.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then TE process will recover automatically. If a manual restart is required, then 'process start te_control' is required to recover.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHUTDOWN Process is shutting down ([chars]): [chars]

Explanation    TE process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not TE process has automatically been restarted.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then TE process will recover automatically. If a manual restart is required, then 'process start te_control' is required to recover.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-WARN [chars]

Explanation    An internal system warning occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-WARN [chars]

Explanation    An internal system warning occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-WARNING_FSM_EVENT_DROP Traffic-eng FSM dropped an event ([chars]) for S2L (tid [unsigned int], etid [unsigned int], lspid [unsigned int], p2mpid [unsigned int], subgroupid [unsigned int])

Explanation    Traffic-eng FSM dropped an event, because the S2L was created after the event was posted.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-WARNING_FSM_EVENT_DROP Traffic-eng FSM dropped an event ([chars]) for S2L (tid [unsigned int], etid [chars], lspid [unsigned int], p2mpid [unsigned int], subgroupid [unsigned int])

Explanation    Traffic-eng FSM dropped an event, because the S2L was created after the event was posted.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-FRR Backup Tunnel ([chars], LSP Id: [unsigned int]) state changed to [chars].

Explanation    The specified backup tunnel interface has changed it's FRR status.

Recommended Action    None. This is a solicited message (by 'logging events frr-protection' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-FRR Backup Tunnel ([chars], LSP Id: [unsigned int]) state changed to [chars].

Explanation    The specified backup tunnel interface has changed it's FRR status.

Recommended Action    None. This is a solicited message (by 'logging events frr-protection' configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_INSUFFICIENT_BW [chars] (LSP Id: [unsigned int]) failed to [chars] because of insufficient bandwidth.

Explanation    The specified interface, with the specified LSP Id, cannot be setup or reoptimized because of insufficient bandwidth. The first %s refers to the tunnel name and the second %s refers to either 'setup' or 'reoptimize'. LSP Id will be always 0 (zero), if failure happens during setup time.

Recommended Action    None. This is a solicited message (by 'logging events lsp-status insufficient-bandwidth' interface configuration). User may verify reservable bandwidth on link as shown in the output of 'show mpls traffic-eng link-management bandwidth-allocation'.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_PREEMPT [chars] (LSP Id: [unsigned int]) has been preempted at [chars].

Explanation    The specified interface, with specified LSP Id, has been preempted at specified IP Address or local node. The first %s refers to signalled tunnel name and the second %s refers to either the IP Address (of the remote node) or 'local node'.

Recommended Action    None. This is a solicited message (by 'logging events preemption' configuration). User may verify reservable bandwidth on remote or local node as specified by the message.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_RECORDROUTE [chars] (LSP Id: [unsigned int]) record-route[chars].

Explanation    The specified interface record-route has changed.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status record-route' interface destination configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REOPT [chars] (LSP Id: [unsigned int]) has been reoptimized.

Explanation    The specified interface has been reoptimized with the specified LSP.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reopt' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REOPT [chars] (old LSP Id: [unsigned int], new LSP Id: [unsigned int]) has been reoptimized; reason: [chars].

Explanation    The specified interface, with the old LSP Id, has been reoptimized with the new LSP Id, because of the specified reason. The first %s refers to the tunnel name and the second %s refers to the reason of reoptimization trigger. The trigger reasons are - - Periodic Timer Expiry - Bandwidth CLI Change - FRR - CLI request - Metric Type Change - Received Preferred Path Exists Msg - Received Preferred Tree Exists Msg - PO switchover trigger - Soft Preemption - AUTO-BW Overflow - AUTO-BW Underflow - AUTO-BW Adjustment - Topology change

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reopt' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE [chars] (LSP Id: [unsigned int]) has been fast-rerouted.

Explanation    The specified interface has been rerouted.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reroute' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE [chars] (LSP Id: [unsigned int]) has been [chars].

Explanation    The specified interface has been rerouted. The first %s refers to the tunnel name and the second %s refers to any of the following depending on the trigger - - fast-rerouted - rerouted due to topology change

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reroute' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE_PENDING [chars] (LSP Id: [unsigned int]) is in re-route pending state.

Explanation    The specified interface is fast-reroute enabled and in UP state; path verification failed but it did not take down the interface. Interface is now in re-route pending state and may stay in this state forever until the interface finds a valid path.

Recommended Action    This is a solicited message (by 'logging event lsp-status reroute' interface configuration). User may verify interface configuration and network topology.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE_PENDING [chars] (LSP Id: [unsigned int]) is in re-route pending state.

Explanation    The specified interface is fast-reroute enabled and in UP state; path verification failed but it did not take down the interface. Interface is now in re-route pending state and may stay in this state forever until the interface finds a valid path.

Recommended Action    This is a solicited message (by 'logging event lsp-status reroute' interface configuration). User may verify interface configuration and network topology.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE_PENDING_CLEAR [chars] (old LSP Id: [unsigned int], new LSP Id: [unsigned int]) has been [chars].

Explanation    The specified interface is fast-reroute enabled and in UP state; earlier path verification failed but it did not take down the interface and got into reroute-pending state. Interface is now getting out of re-route pending state as a result of reoptimization or CLI changes.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reroute' interface configuration).

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_REROUTE_PENDING_CLEAR [chars] (old LSP Id: [unsigned int], new LSP Id: [unsigned int]) has been reoptimized.

Explanation    The specified interface is fast-reroute enabled and in UP state; earlier path verification failed but it did not take down the interface and got into reroute-pending state. Interface is now getting out of re-route pending state as a result of reoptimization.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status reroute' interface configuration).

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_SOFT_PREEMPT [chars] (LSP Id: [unsigned int]) has been soft preempted at interface [chars] ([chars]), timeout after [unsigned int] seconds.

Explanation    The specified interface, with the specified LSP Id, has been soft preempted at specified IP address or local node. The first %s refers to the signalled tunnel name and the second %s refers to the interface name where the preemption was singalled. The third %s refers to the address of the signalling interface.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_SOFT_PREEMPT_TIMEOUT [chars] (LSP Id: [unsigned int]) torn down due to soft preemption timeout

Explanation    The specified interface, with the specified LSP Id, was attempting a soft preemption but timed out and was torn down.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_SOFT_PREEMPTED [chars] (LSP Id: [unsigned int]) has been soft preempted at [chars]

Explanation    The specified interface, with the specified LSP Id, has received a path error message and will be soft preempted.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_SWITCH [chars] (Standby LSP Id: [unsigned int]) [chars]

Explanation    The specified interface has changed operational state.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status switch' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_SWITCH [chars] (Standby LSP Id: [unsigned int]) [chars]

Explanation    The specified interface has changed operational state.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status switch' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_UPDOWN [chars] (LSP Id: [unsigned int]) state changed to [chars]

Explanation    The specified interface has changed operational state.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status state' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-LSP_UPDOWN [chars] (LSP Id: [unsigned int]) state changed to [chars]

Explanation    The specified interface has changed operational state.

Recommended Action    None. This is a solicited message (by 'logging event lsp-status state' interface configuration) and is informative only.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-5-S2L_INSUFFICIENT_BW [chars] (LSP Id: [unsigned int] Dest: [chars]) failed to [chars] because of insufficient bandwidth.