Cisco IOS XR System Error Message Reference Guide, Release 4.3.x
Layer3 Messages
Downloads: This chapterpdf (PDF - 334.0 KB) The complete bookPDF (PDF - 18.29 MB) | Feedback

Table of Contents

Layer 3 Messages

IPHC_MA Messages

IPHC_PROFILE Messages

IPV6_ND_LITE Messages

Layer 3 Messages

This section contains all Layer 3 related System Error Messages.

IPHC_MA Messages

Error Message %L3-IPHC_MA-2-FAIL

Failed to [chars] ([chars]) [chars]

Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-3-DPC_ERROR

[chars] [hex] [chars]

Explanation An error occurred during an operation.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-3-ERROR

[chars] [chars]

Explanation An error occurred during an operation.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-3-MALLOC

Memory allocation failed: [chars]

Explanation A call to malloc failed.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-3-RECVFROM

An error occurred receiving a packet: [chars]

Explanation The socket call recvfrom returned an error.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-4-ERR_EVC_ERROR

Error resetting ’[chars]’ connection: [chars]

Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-4-ERR_MEM_ALLOC

Failed to allocate %zu bytes for ’[chars]’

Explanation The process failed to allocate memory for the specified resource.

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message %L3-IPHC_MA-4-ERR_THREAD_CREATE

Failed to create ’[chars]’ thread: [chars]

Explanation IPHC MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message %L3-IPHC_MA-6-INFO

[chars] [chars]

Explanation printing the iphc ma info.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_MA-6-SENDTO

Packet send attempt timed out: [chars]

Explanation The socket call to send a control packet timed out.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPHC_PROFILE Messages

Error Message %L3-IPHC_PROFILE-2-FAIL

IPHC PROFILE MANAGER failed to [chars]. [chars]

Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_PROFILE-3-ERROR

[chars] [chars]

Explanation An error occurred during an operation.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_PROFILE-3-MALLOC

Memory allocation failed: [chars]

Explanation A call to malloc failed.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_PROFILE-4-ERR_EVC_ERROR

Error resetting ’[chars]’ connection: [chars]

Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_PROFILE-4-ERR_MEM_ALLOC

Failed to allocate [unsigned int] bytes for ’[chars]’

Explanation The process failed to allocate memory for the specified resource.

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message %L3-IPHC_PROFILE-6-INFO

[chars] [chars] [dec]

Explanation printing the iphc profile info.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPHC_PROFILE-6-SENDTO

Packet send attempt timed out: [chars]

Explanation The socket call to send a control packet timed out.

Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ND_LITE Messages

Error Message %L3-IPV6_ND_LITE-3-ERR_ASYNC_SEND_FAIL

Send async pulse to ipv6 nd lite process fails; Error [chars]

Explanation Attempt to send pulse to IPV6 ND lite process fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_CHAN_CONNECT_FAIL

Cannot connect to ipv6 nd lite process; Error [chars]

Explanation Attempt to connect to ipv6 nd lite process channel fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SELF_GENERATE

IPV6 ND Lite self generated fun: [chars]: line: [dec]

Explanation Attempt to munmap the shared memory fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_CACHED_DATA_FAIL

Invalid cached shmem addr [hex]; fd [dec]

Explanation Attempt to get cached shared memory info fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_GIP_UNAVAILABLE

IPV6 ND lite SHMEM can accommodate only [dec] global IP records (request for [dec] records [dec])

Explanation IPV6 ND has requested transfer of more global IP records than shared memory can accommodate

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_MMAP_FAIL

Cannot mmap file [chars]; Error [chars]

Explanation Attempt to mmap the shared memory fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_MUNMAP_FAIL

Cannot munmap file [chars]; Error [chars]

Explanation Attempt to munmap the shared memory fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_OPEN_FAIL

Cannot open shmem file [chars]; Error [chars]

Explanation Attempt to open the shared memory fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_TRNC_FAIL

Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation Attempt to truncate the shared memory file fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_UNAVAILABLE

IPV6 ND lite SHMEM can accommodate only [dec] records (request for [dec] records [dec])

Explanation IPV6 ND has requested transfer of more interface records than shared memory can accommodate

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_UNLINK_FAIL

Cannot unlink file [chars]; Error [chars]

Explanation Attempt to unlink the shared memory fails

Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.