Cisco IOS XR System Error Message Reference Guide, Release 4.2.x
Quality of Service Messages
Downloads: This chapterpdf (PDF - 442.0KB) The complete bookPDF (PDF - 68.41MB) | Feedback

Quality of Service (QoS) Messages

Table Of Contents

Quality of Service (QoS) Messages

AFMON_EA_TEST Messages

AFMON_MA Messages

EFCM Messages

QOS_EA_BW_CHG Messages

QOS_EA_CLEAR_CTR Messages

QOS_EA_IIR_ADD_FAIL Messages

QOS_EA_INIT Messages

QOS_EA_INPLACE Messages

QOS_EA_MODIFY_FAIL Messages

QOS_EA_TEST Messages

QOS_EA_VERIFY Messages

QOS_EA Messages

QOS_FIFO Messages

QOS_LIB_PLMGR_SUPP Messages

QOS_MA Messages

QOS_TXM Messages

QOS Messages

QOSEA Messages

QOSLIB Messages

QOSLIBTIF Messages

QOSRM_DLL Messages

QOSRM Messages

VIDMON_MGR Messages


Quality of Service (QoS) Messages


This section contains all Quality of Service related System Error Messages.

AFMON_EA_TEST Messages

Error Message     
 
    
    
   

%QOS-AFMON_EA_TEST-3-ERROR AF-Mon Test EA error occurred at function [chars]:[unsigned int] - [chars]

Explanation    The AFMon EA test process encountered the specified error

Recommended Action    None

AFMON_MA Messages

Error Message     
 
    
    
   

%QOS-AFMON_MA-3-CAPS_REMOVE Afmon MA caps remove failed: caps: [unsigned int], ifhandle: [hex], error: [chars]

Explanation    The AFMon MA process encountered the specified error while trying to remove the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-AFMON_MA-7-INIT AFMon MA initialization failed in function [chars]: [chars]

Explanation    The Afmon MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the Afmon MA process.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-AFMON_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.

Explanation    The Afmon MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the AFMON MA DB. This could be the result of an incorrect operation in the'verify' phase.

Recommended Action    None

EFCM Messages

Error Message     
 
    
    
   

%QOS-EFCM-3-ERROR EFCM-Err: [chars]

Explanation    This is an error message from the EFCM, it indicates that something has gone wrong internally in the EFCM.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-EFCM-6-INFO EFCM-Info: [chars]

Explanation    This is an informational message from the EFCM

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-EFCM-7-DEBUG EFCM-Debug: [chars]

Explanation    This is a debuging message from the EFCM

Recommended Action    *NONE*

QOS_EA_BW_CHG Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_BW_CHG-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]

Explanation    This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.

Recommended Action    *NONE*

QOS_EA_CLEAR_CTR Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_CLEAR_CTR-6-ERROR QoS EA Clear Qos Counter Failed for ifh [chars] ul_ifh [chars] policy_name [chars] dir [dec] failed: [chars]

Explanation    The QoS EA process encountered the specified error during Clear Qos Counter execution. With this message clear qos counter will not clear the hardware counter. The failure might be becuase of no memory avaible. Please reexecute the CLI clear qos counter. If you see the issue please follow the recommended_action.

Recommended Action    Collect the outputs of 'show qos-ea trace all location location' and 'show process all location location, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.

QOS_EA_IIR_ADD_FAIL Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_IIR_ADD_FAIL-3-ERROR service-policy [chars] [chars] on interface [hex] member [hex] [chars], [chars]

Explanation    The QoS policy could not be applied on the bundle interface member specified.

Recommended Action    If there are errors in the policy, remove the qos policy, correct the errors and reattach. If there are no errors in the policy, collect the required information and contact your Cisco technical support representative.

QOS_EA_INIT Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error.

Recommended Action    Collect the outputs of 'show qos-ea trace all location location' and 'show process all location location, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.

Error Message     
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    Collect the outputs of 'show qos-ea trace all location location' and 'show process all location location, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.

QOS_EA_INPLACE Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_INPLACE-3-ERROR QoS EA inplace modification failed for [chars]

Explanation    The QoS EA process encountered the specified error.

Recommended Action    Collect the outputs of 'show qos-pal trace all location location' and copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.

QOS_EA_MODIFY_FAIL Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_MODIFY_FAIL-3-ERROR inconsistency detected due to ANCP or Bandwidth modification. Execute show qos inconsistency, to obtain information. [chars]

Explanation    The QoS policy on the interface specified could not be modified successfully in response to an ANCP or interface speed change notification. This may happen because the QoS policy is now invalid with the new reference bandwidth.

Recommended Action    Verify the bandwidth values. Remove the qos policy and reattach. Fix errors in the policy, if any.

QOS_EA_TEST Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_TEST-3-ERROR QoS EA test error ocured at function [chars]: [chars]

Explanation    The QoS EA test process encountered the specified error

Recommended Action    None

QOS_EA_VERIFY Messages

Error Message     
 
    
    
   

%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]

Explanation    The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.

Recommended Action    Check the output of 'show config failed' and correct the qos policy appropriately.

Error Message     
 
    
    
   

%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]

Explanation    The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.

Recommended Action    Check the output of 'show config failed' and correct the qos policy appropriately.

QOS_EA Messages

Error Message     
 
    
    
   

%QOS-QOS_EA-3-ERROR [chars]: [chars]: [hex]-'[chars]'

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_EA-6-INFO [chars]: [chars]

Explanation    Informational message

Recommended Action    None

QOS_FIFO Messages

Error Message     
 
    
    
   

%QOS-QOS_FIFO-7-DEBUG_INIT_ERROR An error occurred during debug initialization. Error: [chars]

Explanation    The QoS FIFO dll encountered a problem while initializingg the debug facility. This is not a fatal error. QoS FIFO will continue to execute properly, but will not be able to use the debugging facility.

Recommended Action    None

QOS_LIB_PLMGR_SUPP Messages

Error Message     
 
    
    
   

%QOS-QOS_LIB_PLMGR_SUPP-3-ERR_LTRACEOPEN Error opening ltrace file '[chars]' : QoS lib ltraces will not work

Explanation    Qos lib had trouble opening ltrace file.

Recommended Action    '*SUPPORT*'

QOS_MA Messages

Error Message     
 
    
    
   

%QOS-QOS_MA-3-CAPS_INFO_ADD QoS MA caps add failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], service_policy: [chars], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to add the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-CAPS_REMOVE QoS MA caps remove failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to remove the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-DPC_REM QoS MA DPC (delete) failed: ifhandle: [hex], caps: [unsigned int], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to send a critical operation to the EA.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-IFH_BW_UPDATE_RATE QoS MA bandwidth update failed: ifhandle: [hex], bandwidth: [unsigned int], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to update it's database with the new bandwidth update from ANCP or Ifmgr.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-INVALID_BW_ENTRY Invalid bandwidth entry in QoS-MA bandwidth table: ifhandle: [hex], bandwidth: [unsigned int]

Explanation    The QoS MA process encountered an invalid entry while receiving updates from ANCP or Ifmgr.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-OP_FAIL [chars] Error [hex]:[chars]

Explanation    A critial operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features.

Recommended Action    None.

Error Message     
 
    
    
   

%QOS-QOS_MA-5-L2_OVHD_MOD L2 overhead adjustment can not be applied/modified after QoS policy has been programmed. Please remove and reapply the QoS policy on 'subscriber label [hex]' for the new L2 overhead value to take effect. This message might not be displayed for other subscribers hitting the same problem for the next few seconds

Explanation    Modification of L2 overhead value will not take effect for existing subscribers with QoS policies. For the new value to take effect, remove and reapply the QoS policy.

Recommended Action    Remove and reapply the QoS policy.

Error Message     
 
    
    
   

%QOS-QOS_MA-7-FABQOS_SEND_FAILED The switch-fabric service policy '[chars]' was not accepted correctly by the EA. Error: [chars]

Explanation    The QoS MA process encountered the specified error upon startup or restart. The EA did not process the FABQOS policy correctly.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INIT QoS MA initialisation failed in function [chars]: [chars]

Explanation    The QoS MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the QoS MA process.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.

Explanation    The QoS MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the QOS MA DB. This could be the result of an incorrect operation in the'verify' phase.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INVALID_ERROR_ARRAY_STATUS The dpc error array '[hex]' and caps error array '[hex]' have invalid codes at the same index '[dec]'.

Explanation    An internal error was encountered while processing QoS configuration.

Recommended Action    None

QOS_TXM Messages

Error Message     
 
    
    
   

%QOS-QOS_TXM-3-TXM_ENS_ERR Netio-TXM: An error occured during ens consumer init :[chars]

Explanation    The QOS TXM hit an error condition when registering with ens. LOCP feature may not work.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_TXM-7-DEBUG_INIT_ERROR A error occurred during debug initialization, err: [chars]

Explanation    The QOS TXM process encountered an error while initializing the debug facility. This is not a fatal error. QOS TXM will continue to execute properly, but will not be able to use the debugging facility.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_TXM-7-LOCP_ENS_INFO Netio-TXM: copy_prec:([hex])[dec] prec_value:([hex])[dec]

Explanation    The QOS TXM got a notification from ENS about LOCP config change in control-plane local control-packets. This is just debug message.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_TXM-7-UNINITIALISE_ERROR An error occurred in initialization sequence for iface: [chars]

Explanation    The QOS TXM process encountered an error in its initialsation sequence. This is a serious error. QOS TXM functioning correctly is not guranteed depending upon the exact problem in initialisation sequence

Recommended Action    None

QOS Messages

Error Message     
 
    
    
   

%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]

Explanation    The router cannot allocate more memory.

Recommended Action    It may be necessary to free some memory by exiting a program.

Error Message     
 
    
    
   

%QOS-QOS-3-CLEAR_REDQ_ENTRY_FAIL Error encountered while clearing redq entry for an interface default queue associated with an interface in [chars] PSE. Error: [chars]

Explanation    QMgr encountered an error while programming redq entry for an interface default queue in the associated PSE

Recommended Action    REDQ drop threshold could not be reset to 0.

Error Message     
 
    
    
   

%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]

Explanation    Connection to IM server failed during QoS EA process init. This would lead to an inablility of QoS EA to process CAPS from QoS MA and to a potential disconnect between the hardware/software views of the configured qos policies on the system.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]

Explanation    Connection to some server failed.

Recommended Action    Connection to a server failed. This message is generated from LC. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services

Explanation    Error occurred while waiting for an event.

Recommended Action    Error occurred while waiting for an event. This message is displayed from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_IIR_ATTACH_FAILURE Error encountered during QoS programming for bundle member [chars] (ifh: [hex]) of bundle CH[hex], direction: [chars], error: [chars]

Explanation    A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member.

Recommended Action    If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_IM_CAPS_RESYNC_FAILURE Error encountered during caps resync with IM for interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]

Explanation    QoS EA encountered an error during resync of QoS capsulations with IM.

Recommended Action    Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_IMDR_PREPARE_FAILURE QoSEA encountered a policy in a failed state. ifh: [hex], direction: [chars]. Aborting iMDR during IMDR_SHUTDOWN state

Explanation    QoS EA encountered a policy in a failed state during an iMDR shutdown state.

Recommended Action    Please resolve the QoS errors before attempting ISSU

Error Message     
 
    
    
   

%QOS-QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY Error encountered during rollback of policy modification on interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]

Explanation    QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.

Recommended Action    Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.

Error Message     
 
    
    
   

%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager

Explanation    Failed to create event manager.

Recommended Action    Failure encountered while creating event manager. This message is generated from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-INTF_CREATE_FAIL Error encountered during the allocation of queueing resources for interface, ifh: [hex] in [chars] queueing asic. Error: [chars]

Explanation    QMgr encountered an error during the allocation of queueing resources within a queuing asic as part of interface create.

Recommended Action    Interface create failed.

Error Message     
 
    
    
   

%QOS-QOS-3-INTF_DELETE_FAIL Error encountered during the de-allocation of queueing resources for interface, ifh: [hex] in the [chars] queueing asic. Error: [chars]

Explanation    QMgr encountered an error during the de-allocation of queueing resources within a queuing asic as part of interface delete.

Recommended Action    Interface delete failed.

Error Message     
 
    
    
   

%QOS-QOS-3-INTF_MODIFY_FAIL Error encountered during the re-programming of queueing resources for interface, ifh: [hex] in the [chars] queueing asic. Error: [chars]

Explanation    QMgr encountered an error during the re-programming of queueing resources within a queuing asic as part of interface modify operation.

Recommended Action    Interface modify failed.

Error Message     
 
    
    
   

%QOS-QOS-3-PROGRAM_REDQ_ENTRY_FAIL Error encountered while programming redq entry for interface default queues in [chars] PSE. Error: [chars]

Explanation    QMgr encountered an error while programming redq entry for interface default queues in the associated PSE

Recommended Action    REDQ drop threshold could be 0.

Error Message     
 
    
    
   

%QOS-QOS-3-REDQ_UPDATE_HW_FAIL Error encountered during the update of REDQ entries to hw in [chars] PSE. Error: [chars]

Explanation    QMgr encountered an error when flushing shadow REDQ entries to hardware.

Recommended Action    This is a fatal condition. Hardware and software REDQ entries are out of sync. Might have to restart the LC

Error Message     
 
    
    
   

%QOS-QOS-3-UNKNWN_INTF_DEFAULT_QUEUE Unable to ascertain interface default queue in [chars] queueing asic for interface, ifh: [hex]. Error: [chars]

Explanation    QMgr encountered an error in obtaining the interface default queue in a queuing asic for a given interface. This prevented QMgr from programming REDQ entry for the corresponding queue. Even though the interface is created, it will not be able to carry traffic

Recommended Action    --

Error Message     
 
    
    
   

%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event

Explanation    Error occurred while waiting for an event.

Recommended Action    Error occurred while waiting for an event. This message is displayed from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process has exited and restarted.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%QOS-QOS-6-EA_DEBUG_INIT_FAIL Failed to initialise debug infra within QoS EA. Error: [chars]

Explanation    Debug initialization failed within EA. Debugs may not be printed

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_LTRACE_INIT_FAIL Failed to initialise ltrace infra within QoS EA. Error [chars]

Explanation    Ltrace initialization failed within EA. Ltraces may not be printed

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_MIPC_NTFN_ACK_FAILURE Error encountered while trying to ACK to an MIPC event notification [unsigned int]. Error [chars]

Explanation    QoS EA encountered an error while ACKing to an MIPC event

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE Failed to process MIPC notification [unsigned int] within QoS EA. Error [chars]

Explanation    QoS EA encountered an error while processing an MIPC event notification

Recommended Action    Try restarting QoS EA and/or HFR Platform Manager process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_SCOL_INIT_FAILURE Statsd registration failed(Error: [chars]). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.

Explanation    Statsd registration failed. QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.

Recommended Action    Restart QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_SHM_INIT_FAILURE Shared memory initialization failed(Error: [chars]). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.

Explanation    QoS_EA failed to initialize stats shared memory(after retry count equals 5). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.

Recommended Action    Take a look at the system memory and the processes which are running. Restart QoS_EA process when the memory usage goes down.

Error Message     
 
    
    
   

%QOS-QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q to [dec]. Dropping packet. Error: [chars]

Explanation    Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%QOS-QOS-6-NO_SPACE_ERROR Could not find space in parent_qos_index_array for parent ifhandle [hex]

Explanation    QoS_EA failed to allocate space for parent ifhandle in parent_qos_array. This will cause the policymap attaching to parent and sub-interfaces. And conflicting qos actions.

Recommended Action    Remove the parent qos policy-map and report the number of parent qos interfaces needed.

Error Message     
 
    
    
   

%QOS-QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to initialise debug infra within the qfifo node on the netio chain. Error: [chars]

Explanation    Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed.

Recommended Action    Try restarting netio process

Error Message     
 
    
    
   

%QOS-QOS-6-UPDATE_INTF_BW_FAILURE Encountered errors while updating interface bandwidth for interface [hex]

Explanation    QoSEA encountered errors while updating the interface bandwidth of an interface in response to a bandwidth notification from IM.

Recommended Action    If the errors are due to HW programming issues, a process restart of QoSEA process would enable QoSEA to re-attempt the programming of QoS hardware resources. If the errors are due to incompatible configuration (say, a failed QoS policy with regard to the current interface bandwdith), remove/add of the failed QoS configurations would address this error condition

Error Message     
 
    
    
   

%QOS-QOS-7-ERR_EVM_CREATE Failed to setup event manager

Explanation    Failed to setup event manager.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

QOSEA Messages

Error Message     
 
    
    
   

%QOS-QOSEA-3-BM_ADD_REMOVE_ERROR QoSEA-Err: Member Add/Remove: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong in QoS EA while adding/removing a bundle member. Error can happen with/without QoS on bundle.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-3-BWCHG_ERROR QOSEAERR: update bandwidth for ifh [hex] with [dec] [chars] [chars] [chars]

Explanation    This is an error message from the QoS EA bandwidth change Process, it indicates that something has gone wrong internally in the QoS EA during bandwidth change. %x - Indicates ifh %d - New bandwidth %s - Direction %s - errormsg %s - errormsg

Recommended Action    QoS EA encountered error during bandwidth change. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show multilink interfaces detail location x [For ML] show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-ERROR QoSEA-Err: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates something has gone wrong internally in QoS EA. %s - Indicates the reason of failure.

Recommended Action    QoS EA process has encountered an error. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-EXIT_ERROR QoSEA-Err: [chars] [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in QoS EA. %s - Both strings indicate the reason of failure.

Recommended Action    QoS EA process has encountered an error. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show platform-mgr lc trace location x show im trace location x show iir trace location x show memory location x show memory summary location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-IMATTR_ERROR QOSEAERR: im_attr_get bandwidth [chars] [hex] Error: [chars]

Explanation    This is an error message from the QoS EA bandwidth change process,it indicates that something has gone wrong internally in the QoS EA during bandwidth attribute get. %s - Errormsg %x - ifh %s - Errormsg

Recommended Action    QoS EA process encountered error during bandwidth attribute get. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show logging show multilink interfaces detail location x [For ML] If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS EA could not create the necessary message channel due to the given error

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSEA-3-MSG_HANDLER_ERR An error occurred in the [chars] message handler

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-POLICY_ERROR QoSEA-Err: class:[chars], [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in QoS EA. %s - Both errormsg indicates the reason of failure

Recommended Action    QoS EA process has encountered a policy error. This message is displayed from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-ROLLBACK_ERROR QoSEA-Rollback-Err: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that rollback failed in the QoS EA. %s - Errormsg

Recommended Action    QoS EA process encountered error during rollback. Pls analyse the resource availability in the LC. Remove and add the qos policy-map for the interface. This message is displayed from LC. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSEA-3-UNHANDLED_MSG The QoS EA received an unhandled message

Explanation    The QoS EA received a message that it was unable to handle'

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSEA-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-4-WARN QoSEA-Warn: [chars]

Explanation    This is a warning message from the QoS EA Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-5-NOTICE QoSEA-Notice: [chars]

Explanation    This is a notice message from the QoS EA Process

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-5-POLICE_PARAM_ADJUST QoSEA-Policer-Param-Notice: [chars]

Explanation    This is a notice message from the QoS EA Process

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]

Explanation    This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-INFO QoSEA-Info: [chars]

Explanation    This is an informational message from the QoS EA Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS EA received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-POLICY_INFO QoSEA-Info: class:[chars], [chars]

Explanation    This is an informational message from the QoS EA Process. It indicates that something can not be configure in service policy.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-7-DEBUG QoSEA-Debug: [chars]

Explanation    This is a debuging message from the QoS EA Process

Recommended Action    *NONE*

QOSLIB Messages

Error Message     
 
    
    
   

%QOS-QOSLIB-3-ERR_DLCLOSED Error CLosing DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly

Explanation    The Qos lib had trouble closing DLL.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%QOS-QOSLIB-3-ERR_DLOPEN Error openening DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly

Explanation    The Qos lib had trouble opening DLL.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

QOSLIBTIF Messages

Error Message     
 
    
    
   

%QOS-QOSLIBTIF-3-ERR_ALE_ATTRIB_VAL Invalid combination of datalink: [dec], encap1: [dec], encap2: [dec] for ALE

Explanation    Incorrect value pair for Access Loop Encapsulation.

Recommended Action    'Subsciber session is to be created with a valid combination of attribute-' 'value pair to derive a valid encapsulation'

QOSRM_DLL Messages

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-ERROR QoSRM-DLL-Err: [chars]

Explanation    This is an error message from the QoS RM DLL, it indicates that something has gone wrong internally in the QoS RM dll.

Recommended Action    This error means an issue happened in qos resource manager during hw programming. This message comes from LC code. Please collect logs from following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS RM dll could not create the necessary message channel due to the given error

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-MSG_HANDLER_ERR An error ([chars]) occurred in the [chars] message handler,Msg:[hex]

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNHANDLED_MSG The QoS RM dll received an unhandled message

Explanation    The QoS RM dll received a message that it was unable to handle'

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]

Explanation    The QoS RM dll received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-4-WARN QoSRM-DLL-Warn: [chars]

Explanation    This is a warning message from the QoS RM DLL

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-6-INFO QoSRM-DLL-Info: [chars]

Explanation    This is an informational message from the QoS RM DLL

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS RM dll received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-7-DEBUG QoSRM-DLL-Debug: [chars]

Explanation    This is a debuging message from the QoS RM DLL

Recommended Action    *NONE*

QOSRM Messages

Error Message     
 
    
    
   

%QOS-QOSRM-3-ERROR QoSRM-Err: [chars]

Explanation    This is an error message from the QoS RM Process, it indicates that something has gone wrong internally in the QoS RM.

Recommended Action    This error indicates qos resource manager has encountered an error condition. The message is generated from LC software. Please collect logs from following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS RM could not create the necessary message channel due to the given error

Recommended Action    QoS RM could not create message channel. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-3-MSG_HANDLER_ERR Event: [chars] occurred in the [chars] message handler, Msg:[hex]

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    This error means QOS_RM encountered and error during message handling. The message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNHANDLED_MSG The QoS RM received an unhandled message

Explanation    The QoS RM received a message that it was unable to handle'

Recommended Action    This error means qos_rm was unable to handle a message. The message is generated from LC software. Please collect logs of following command. show qos ea-trace location x show qosrm ltrace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    This error means QoS RM encountered and error due to incorrect message handler. The message is generated from LC software. Please collect logs of following command. show qos ea-trace location x show qosrm ltrace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]

Explanation    The QoS RM received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.

Recommended Action    This error means QoS RM found an incorrect Q-Type. Message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOSRM-4-WARN QoSRM-Warn: [chars]

Explanation    This is a warning message from the QoS RM Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM-6-INFO QoSRM-Info: [chars]

Explanation    This is an informational message from the QoS RM Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS RM received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSRM-7-DEBUG QoSRM-Debug: [chars]

Explanation    This is a debuging message from the QoS RM Process

Recommended Action    *NONE*

VIDMON_MGR Messages

Error Message     
 
    
    
   

%QOS-VIDMON_MGR-7-MAX_CLONE_PROFILE_EXCEEDED The maximum number of clone profiles ([unsigned int]) allowed by the system has been exceeded. Current value ([unsigned int])

Explanation    'There is a maximum number of clone profile list entries that the ' 'system supports, and this number has been exceeded'

Recommended Action    None.