Cisco IOS XR System Error Message Reference Guide, Release 4.0
Operating System (OS) Messages
Downloads: This chapterpdf (PDF - 1.7MB) The complete bookPDF (PDF - 53.73MB) | Feedback

Operating System (OS) Messages

Table Of Contents

Operating System (OS) Messages

action Messages

ALARM_TEST Messages

ALLOCATOR Messages

ARBMGR Messages

ATC_CACHE Messages

ATC_LIB Messages

ATTRACTOR Messages

AVPAIR Messages

BANNER Messages

BCDL Messages

BLWM Messages

CDS_CONSUMER_LIB Messages

CDS_PRODUCER_LIB Messages

cds_proxy Messages

cds_svr Messages

CDSUTILS Messages

CERR_LIB Messages

CERR_SVR Messages

CHUNK Messages

DEBUG_CERR Messages

deflate Messages

DISTRIB_LIB Messages

DUMPER_MARK Messages

DUMPER_SNAP Messages

DUMPER Messages

EVM Messages

FILECOPY_LIB Messages

FILECOPY Messages

FSM Messages

GSP_C12000 Messages

GSP_NOTIF Messages

gsp Messages

INIT Messages

ISIS_MIB Messages

ITAL_SHM Messages

ITAL Messages

KD_MBUS Messages

LGROUP Messages

LIBDLLMGR Messages

LIBSYSMGR Messages

LPTS_LIB Messages

LPTS_MRT Messages

LPTS_PA_FF_CL Messages

LPTS_PA_FF Messages

LPTS_PIFIB Messages

LPTS_PREIFIB Messages

LPTS Messages

LTRACE_CONFIG Messages

LTRACE_SDT_SHOW Messages

LTRACE_SDT Messages

LTRACE_SERVER Messages

LTRACE_SYNC Messages

LTRACE Messages

LWMESS Messages

MEMLOG Messages

MEMPOOL_EDM Messages

MGII_API Messages

MPLS_VPN_MIB Messages

NCD Messages

NQC Messages

NRS_LIB Messages

nrs Messages

NRSUTILS Messages

OBFLINFRA_CLI Messages

OBFLINFRA_CLIENT Messages

OBFLINFRA_DRIVER Messages

OBFLINFRA_INT Messages

OBFLMGR Messages

PA Messages

PCDS Messages

PLACED_LIB Messages

PLACED Messages

PLATFORM_LPTS_COM_IFIB Messages

PLATFORM_LPTS_COM_NETIO Messages

PLATFORM_LPTS_LIB Messages

PLATFORM_LPTS_PIFIB Messages

PMHAC Messages

PMHAD Messages

PROCFIND Messages

PUF Messages

QAD_LIB Messages

QAD_QUEUE_MODEL Messages

QAD_SERVER Messages

QNET_LC Messages

QNET Messages

QSM Messages

QUEUE Messages

RDS Messages

RDSFS Messages

REDFS Messages

REGEXP Messages

RSI_AGENT Messages

RSI_MASTER Messages

RSVDPMEM Messages

RT_CHECK_LIB Messages

RT_CHECK Messages

SEIPC Messages

SHMWIN_SVR Messages

SHMWIN Messages

SPAIPC_NETIO Messages

SS_LIB Messages

SSM Messages

SYSLOG Messages

SYSMGR Messages

TIMER Messages

TZ Messages


Operating System (OS) Messages


This section contains all Operating System (OS) and OS infrastructure related System Error Messages.

action Messages

Error Message     
 
    
    
   

%OS-action-3-BISTATE_MSG State has changed

Explanation    This is a test message for action-bistate message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-NONE_MSG Invoking action 'none' message

Explanation    This is a test message for action-none message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-PEG1MSG Invoking action 'peg' message

Explanation    This is a test message for action-peg message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-PEG2MSG Invoking action 'peg' message

Explanation    This is a test message for action-peg message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-RESET_MSG Invoking action 'reset' message

Explanation    This is a test message for action-reset message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-RESTART_MSG Invoking action 'restart' message

Explanation    This is a test message for action-restart message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-action-3-TESTMSG Invoking a test message [chars]

Explanation    This is a test message for ios error message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ALARM_TEST Messages

Error Message     
 
    
    
   

%OS-ALARM_TEST-3-ALARM_GENERATE [chars] alarm generated [[unsigned int] [chars] alarms generated so far]: [chars]

Explanation    Autogenerated alarm

Recommended Action    No action is required.

ALLOCATOR Messages

Error Message     
 
    
    
   

%OS-ALLOCATOR-3-LTRACE_INIT_FAILED ltrace_init failed with retcode [dec], ([chars])

Explanation    Ltrace initialization failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ALLOCATOR-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The allocator module has either failed to acquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ALLOCATOR-7-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The allocator module has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ALLOCATOR-7-NULL --

Explanation    --

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ALLOCATOR-7-SIZE_MISMATCH Mismatch between block size discovered in pool memory ([unsigned int]) and block size specified by client ([unsigned int])

Explanation    The block size in the memory passed into the allocator module does not match that passed in by the caller on initialisation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ARBMGR Messages

Error Message     
 
    
    
   

%OS-ARBMGR-4-INIT_ERROR Unexpected init error: [chars]: [chars]: [hex]

Explanation    An unexpected init error condition encountered.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-ARBMGR-4-MBI_BOOT_HOLD MBI Boot Hold delay of [dec] seconds done to allow other RP to become active due to multiple ungraceful resets on this RP.

Explanation    An MBI boot hold has been introduced to allow the other RP to boot first to give it the opportunity to become the active RP. This is because this RP has had multiple ungraceful resets in the last two hours which could be preventing the router from being stable.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%OS-ARBMGR-7-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

ATC_CACHE Messages

Error Message     
 
    
    
   

%OS-ATC_CACHE-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATC_LIB Messages

Error Message     
 
    
    
   

%OS-ATC_LIB-3-CLASS_CACHE_CREATE_FAIL Unable to create class cache entry for class [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ATC_LIB-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATTRACTOR Messages

Error Message     
 
    
    
   

%OS-ATTRACTOR-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ATTRACTOR-6-INFO [chars] [chars]

Explanation    Information associated with current attractor process state

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AVPAIR Messages

Error Message     
 
    
    
   

%OS-AVPAIR-6-ADD_FAIL [chars]: avpair_add failure on avlist [hex].

Explanation    avpair_add failed while unpacking the Posix message into avlist

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-AVPAIR-6-BUFFER_TOO_SMALL [chars]: need [dec] bytes, only have [dec] in buffer, msg dropped.

Explanation    avpair API fails because the buffer is too small.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-AVPAIR-6-ERR_BAD_AVLIST [chars]: Attempt to use uninitialized avlist [hex].

Explanation    An illegal attempt to use an uninitialized avpair list

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-AVPAIR-6-ERR_BAD_LIST [chars]: Attempt to re-initialize list [chars] failed

Explanation    An illegal attempt to reinitialize an avpair list

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BANNER Messages

Error Message     
 
    
    
   

%OS-BANNER-3-CERR_REGISTER_FAILED Error code registration failed: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-3-CONFIG_INIT_FAILED Banner config initialization failed: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-3-EVENT_BLOCK_ERROR Event block dispatch error: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-3-EVENT_MGR_CREATE_FAILED [chars]: event manager creation failed: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-3-SYSMGR_CALL System manager call [chars] failed: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-7-SYSDB_BIND_FAILURE Failed to bind to sysdb path [chars]: [chars]

Explanation    Error binding to sysdb path

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message     
 
    
    
   

%OS-BANNER-7-SYSDB_REGISTRATION_FAILURE Failed to register for sysdb path [chars]: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-7-SYSDB_UNREGISTRATION_FAILURE Failed to unregister for sysdb path [chars]: [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-BANNER-7-UNKNOWNCARD The cardtype [dec] is unknown to us

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BCDL Messages

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_AGENT_USAGE usage: [chars] -p producer_base_name [-t r]

Explanation    Incorrect command line arguments were given to the module

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_BASE_NAME The plug-in base name: [chars] is longer than [dec] bytes

Explanation    The name could not be used.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DEBUG_INIT Unable to initialize debug capabilities: [chars] failed: [chars]

Explanation    The program cannot initialize its debug capabilities.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DEBUG_INIT Unable to initialize debug capabilities: [chars] failed: [chars]

Explanation    The program cannot initialize its debug capabilities.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DLL_OPEN The plug-in dll: [chars] could not be loaded: [chars]

Explanation    The interface library is not available.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DLSYM The plug-in dll symbol [chars] could not be found: [chars]

Explanation    The interface library is not available.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_DOUBLE_AGENT Found duplicate agent for BCDL group [chars]: node [hex], jid [dec]

Explanation    A BCDL agent for the group is already running.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_EVENT event manager function [chars] failed, error [dec]: [chars]

Explanation    A call to a event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_EVENT_MANAGER event manager function [chars] failed: [chars]

Explanation    A call to an event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GENERIC_FUNC function [chars] failed: [chars]

Explanation    A call to some function interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GENERIC_FUNC function [chars] failed: [chars]

Explanation    A call to some function interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP group services function [chars] failed for gid [dec], error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP group services function [chars] failed for gid [dec], error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP_CREATE group_create failed for group [chars], error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP_CREATE_LWG group_create_lwg failed for group [chars], parent gid [dec], error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP_NODESET Nodeset contains [dec] mbrs: (nid) [chars]

Explanation    Displaying the memberset details of a failed _nodeset call.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_GROUP_NODESET Nodeset call: gid [dec], nid [dec]

Explanation    Displaying the memberset details of a failed _nodeset call.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_HB_MISS group [chars]: no heartbeats received in last [dec] seconds

Explanation    The bcdl client library detected that it should have received a heartbeat from the agent, but didn't

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_INSTALLMGR An error was returned from install mgr function [chars]: [chars]

Explanation    A call to an install manager function failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_LWM LWM function [chars] failed, error [dec]: [chars]

Explanation    A call to a LWM interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_MALLOC Couldn't malloc [dec] bytes: [chars]

Explanation    The requested memory is not available

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_MALLOC Couldn't malloc [dec] bytes: [chars]

Explanation    The requested memory is not available

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_PTHREAD Pthread operation [chars] [hex] failed: [chars]

Explanation    The mutex lock/unlock failed

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_PTHREAD Pthread operation [chars] [hex] failed: [chars]

Explanation    The mutex lock/unlock failed

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_RINFO Unable to use group services function [chars] for type [dec]: error [dec]: [chars], grp has [dec] mbrs

Explanation    A call to a group services rinfo function failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-3-MSG_TABLE_REF_COUNT Table id [hex] not found in subgroup [dec] to merge from subgroup [dec]

Explanation    Any table has to be part of the subgroup 0.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-7-MSG_CRIT_NORM Bad bytes critical ([dec]) or normal ([dec]), using default [dec] and [dec]

Explanation    The bcdl_agent_start api was used incorrectly.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-7-MSG_READ_STALL group [chars]: No reads from producers for [dec] seconds on subgroup [dec]

Explanation    No data reads has been done by bcdl_agent from producer on a child subgroup for the specified time.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-7-MSG_STALL group [chars]: No data message received for the last [dec] seconds on the subgroup: [dec]

Explanation    The consumer has not received data msg on the child group for sometime.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-BCDL-7-MSG_STALL_RESET Group [chars] hit max of [dec] messages queued - initiating reset of this consumer

Explanation    The consumer is not servicing the incoming message queue.

Recommended Action    Contact support.

BLWM Messages

Error Message     
 
    
    
   

%OS-BLWM-4-BATCH_CONFIG_REPLY_FAILED Failed to send batch-configuration reply to client, errno [dec]

Explanation    A BLWM-enabled server failed to send a reply about batch configuration to the client. The client might have restarted and this could be a transient error. Wait for the client to restart and reestablish connection with the server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-BATCHED_REPLY_FAILED Failed to send a batch of replies to client, errno [dec]

Explanation    A BLWM-enabled server encountered a failure while sending batched replies to the client. The client might have restarted. Wait for the client to restart and reconnect to server to resume the processing.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-PULSED_FLUSH_FAILED Pulsed flush of batched requests failed, Reason: [chars]

Explanation    A BLWM-enabled client failed to flush the batched LWM requests. This is most likely because the server process restarted. Wait for client to reestablish connection with server and flush the batched requests again.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-REPLY_PROCESSING_ERRORS An error occurred while processing the batched replies, error: [chars]

Explanation    A failure occurred while processing the batched replies received from the server. This is most likely an internal error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-RESTART_PROCESSING_ERRORS An error occurred during restart handling, error: [chars]

Explanation    A failure occurred while processing the requests/replies from the previous life after a restart. A best-effort attempt is made to process the requests/replies from the previous life. if this attempt fails, this error message is printed and the state is reset for normal BLWM operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-SHMEM_FAILURE Failed to acquire/access shared memory, error: [chars]

Explanation    A failure occurred while initializing or accessing the shared memory buffer used to assemble the responses. This is most likely an internal error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-TIMED_FLUSH_FAILED Timed flush of batched requests failed, Reason: [chars]

Explanation    A BLWM-enabled client failed to flush the batched LWM requests. This is most likely because the server process restarted. Wait for client to reestablish connection with server and flush the batched requests again.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-BLWM-4-WARNING [chars] rc equals [dec]

Explanation    For displaying blwm debugging information.

Recommended Action    No action is required.

CDS_CONSUMER_LIB Messages

Error Message     
 
    
    
   

%OS-CDS_CONSUMER_LIB-3-NULL_CONSUMER [dec]: Consumer has not registered yet, tag equals [hex]

Explanation    cds lib has got a message to process, but consumer has not yet registered. please collect cds consumer ltrace.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

CDS_PRODUCER_LIB Messages

Error Message     
 
    
    
   

%OS-CDS_PRODUCER_LIB-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The client library has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CDS_PRODUCER_LIB-3-SEND_FAILED [chars]: ### failed to send LWM message ret [dec] error [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

cds_proxy Messages

Error Message     
 
    
    
   

%OS-cds_proxy-2-USAGE Incorrect arguments: Usage: [chars] [svr_threads]

Explanation    Incorrect command line parameters were passed to the cds proxy, and so it failed to start.

Recommended Action    Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-cds_proxy-3-INTERNAL [chars]: rc [hex], [chars]

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-cds_proxy-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The server has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-cds_proxy-3-NULLARG --

Explanation    --

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

cds_svr Messages

Error Message     
 
    
    
   

%OS-cds_svr-2-USAGE Incorrect arguments: Usage: [chars] [svr_threads]

Explanation    Incorrect command line parameters were passed to the cds proxy, and so it failed to start.

Recommended Action    Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-cds_svr-3-INTERNAL [chars]: rc [hex], [chars]

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-cds_svr-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The server has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CDSUTILS Messages

Error Message     
 
    
    
   

%OS-CDSUTILS-7-INTERNAL_ERROR Encountered internal error: [chars]: [dec]:[hex]:[hex]

Explanation    The CDS module has encountered internal error.

Recommended Action    None

Error Message     
 
    
    
   

%OS-CDSUTILS-7-INVALID_ARG Invalid argument passed: [chars]: [dec]:[hex]:[hex]

Explanation    CDS module was passed invalid arguments.

Recommended Action    None

CERR_LIB Messages

Error Message     
 
    
    
   

%OS-CERR_LIB-7-CORRUPT [chars]: corrupted data structured detected at line [dec]

Explanation    The infrastructure library detected a corrupt data structure while performing internal checks.

Recommended Action    Run diagnostics to determine if this is a result of a hardware problem. If the problem reoccurs, a memory dump should be taken to assist TAC.

Error Message     
 
    
    
   

%OS-CERR_LIB-7-NOMEM [chars]: could not allocate memory ([dec] bytes requested): [chars]

Explanation    The infrastructure library was unable to allocate memory from the system for an internal data structure.

Recommended Action    Check to see if sufficient memory resources remain for normal operations. Add memory if necessary. Verify the installation of the infrastructure library. Re-load if required.

Error Message     
 
    
    
   

%OS-CERR_LIB-7-PTHREADKEY [chars]: could not create thread key: [chars]

Explanation    The infrastructure library was unable to obtain a thread key for thread private data storage.

Recommended Action    Check to see if sufficient memory resources remain for normal operations. Add memory if necessary.

Error Message     
 
    
    
   

%OS-CERR_LIB-7-SETSPECIFIC [chars]: could not set thread specific data pointer for key [hex]: [chars]

Explanation    The infrastructure library was unable to set a thread specific data pointer for thread private data storage.

Recommended Action    Check to see if sufficient memory resources remain for normal operations. Add memory if necessary.

CERR_SVR Messages

Error Message     
 
    
    
   

%OS-CERR_SVR-7-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occurred in the event loop. The process must exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CERR_SVR-7-INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the Cerrno Server process

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CERR_SVR-7-INSTALL Error updating Cerrno DLL Lookup table during Install Event. Error: [chars]

Explanation    An error has occurred updating the reference table for cerrno error messages. Some cerrno messages may be incorrect or undecodable.

Recommended Action    A successful restart of the Cerrno Server will result in future messages being decodable.

Error Message     
 
    
    
   

%OS-CERR_SVR-7-SYSMGR Failure communicating readiness to SysMgr. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CHUNK Messages

Error Message     
 
    
    
   

%OS-CHUNK-3-CREATE Chunk named [chars] not created because [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-3-INIT Error initializing chunk [chars], mutex error, [chars]

Explanation    The chunk's mutex could not be initialized.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message     
 
    
    
   

%OS-CHUNK-3-PRIVMEM_SIZE Private pool size ([dec]) smaller than request ([dec])

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-BADELESIZE Chunk element size is more than 64k for [chars]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-BADREFCOUNT Bad chunk reference count ([dec]), chunk [pointer] data [pointer].

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-BOUNDS Attempted to exceed freelist chunk bounds, chunk [hex], data [hex]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-DESTROY_NOTEMPTY Attempted to destroy chunk with siblings, chunk [hex]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%OS-CHUNK-7-FREE Attempted to free nonchunk memory, chunk [pointer], data [pointer]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%OS-CHUNK-7-INVFREE Attempted to free already freed chunk memory, chunk [hex], data [hex]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%OS-CHUNK-7-LOCK Attempted to lock unlockable chunk data, chunk [hex] data [hex]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-NEG_FREE_COUNT Negative free counter on chunk [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-NOSIBLING Could not find the sibling to allocate memory from. Chunk [chars], total free [dec] inuse [dec].

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-NULLCHUNK --

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-CHUNK-7-PARTIAL Attempted to destroy partially full chunk, chunk [hex]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%OS-CHUNK-7-SIB_INDEX Error noticed in the sibling of the chunk [chars] Chunk index : [dec], Chunk real max : [dec]

Explanation    A software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DEBUG_CERR Messages

Error Message     
 
    
    
   

%OS-DEBUG_CERR-7-REGISTER [chars]: could not register the debug specific structured error messages: [chars]

Explanation    The debug library was unable to register its debug specific condition codes. Condition messages from the debug library are likely to be degraded.

Recommended Action    Check to see if sufficient memory resources remain for normal operations. Add memory if necessary. Verify the installation of the debug library. Re-load if required.

Error Message     
 
    
    
   

%OS-DEBUG_CERR-7-REGISTER [chars]: could not register the debug specific structured error messages: [chars]

Explanation    The debug library was unable to register its debug specific condition codes. Condition messages from the debug library are likely to be degraded.

Recommended Action    Check to see if sufficient memory resources remain for normal operations. Add memory if necessary. Verify the installation of the debug library. Re-load if required.

deflate Messages

Error Message     
 
    
    
   

%OS-deflate-3-ERROR [chars] [chars] [chars]

Explanation    Error in uncompressing

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DISTRIB_LIB Messages

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-ASYNC_HANDLER_FAILED [chars]: error attaching async handler: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-BAD_CANCEL_TYPE [chars]: bad cancel type [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-BAD_MSG_TYPE [chars]: bad message type [dec] for group [chars] gid [dec] client callback handler [pointer], previous gid [dec] callback handler [pointer]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-BAD_REPLY [chars]-I-replying to a non-block sync msg

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-COND_OP_FAILED [chars]: Cond op [chars] failed on conditional variable [chars]: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-CONNECT_FAILED [chars]: ### failed to connect to [chars], [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-CONNECT_GSP_FAILED [chars]: error connecting to GSP: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-CORRUPT_HEAP Group [chars] gid [dec] got corrupted msg, component number got [hex] expect [hex] mtype got [dec] expect [dec] callback handler [pointer] previous msg type [dec], restarting to recover

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-CREATE_GROUP_ERR [chars]:[dec] [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-DEF_SYNC_HANDLER_FAILED [chars]: error attaching lib's default sync handler: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-EVENT_ASYNC_ATTACH_FAILED [chars]: error async attach all failed: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-EVENT_BLOCK_ERR [chars]: rc [hex], [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-EVENT_FILE_ATTACH_FAILED [chars]: event_file_attach call failed: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-FUNCTION_ERR [chars]:[dec] [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-GSP_FAILURE [chars] GSP failure connection lost...

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-gsp_msg_failed Failed to notify node state when [chars]: [chars]

Explanation    The internal communication channel among pctl threads is broken.

Recommended Action    Must restart the process.

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-GSP_MSG_RCV_FAILURE [chars]: error retrieving msg from GSP: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-GSP_TRACE_BACK [chars] : [chars] [hex]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-HEAP_CORRUPT Group [chars] gid [dec] got msg corrupted by client callback handler [pointer] msg length [dec], restarting to recover

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-INCORRECT_GROUP_ID Can not rejoin group [chars], group id changed from [dec] to [dec], restarting

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-INIT_MEM_MANAGER_FAILED [chars]: error initializing lib memory manager

Explanation    Error initializing lib memory manager

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MALLOC_FAILED [chars]:[dec] malloc failed

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MSG_CHAN_DISCONNECT_FAIL [chars]: msg_chan_disconnect failed [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MSG_GET_CONN_FAILED [chars]: msg_get_conn call failed: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MSG_SEND_ERR [chars] msg_send error ERRNO: [dec]::[chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MUNMAP_FAILED [chars]: munmap of size [dec] at addr [hex] failed. Error [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-MUTEX_OP_FAILED [chars]: Mutex op [chars] failed on mutex [chars]: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-NO_PRIV_MSG_HANDLER [chars]: no private msg handler!

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-REG_ERROR [chars]-E-[chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-SBM_MODE_ENTER_ERR [chars]: error sending sbm mode enter: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-3-SYNC_RESP_ERR [chars] error sending SYNC_RESPONSE: [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-6-BAD_SEQ_CHAN [chars]: Sequencer channel for [chars] does not exist.

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-6-GROUP_SEQ_INFO [chars][[dec]]-setting lib seq for gid : [dec] to nidx

Explanation    Just more information.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-6-GSP_TRACE_HDR [chars] : Previous accesses (line number): [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-6-MEM_TRACE_BLOCK [chars] -Traceback equals [hex] [hex] [hex] [hex] [hex]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DISTRIB_LIB-7-INCORRECT_CBP_ACCESS_COUNT [chars]: Incorrect CBP access count [dec], can't be decreased

Explanation    CBP access count records the number of threads accessing the CBP. Access count shall be greater than 0 when it is to be decreased

Recommended Action    Collect show tech-support gsp and process restart client if client has any group communication issue

DUMPER_MARK Messages

Error Message     
 
    
    
   

%OS-DUMPER_MARK-4-NO_SLOT The array is filled, no slot found for inserting [hex] dropping request

Explanation    A new request for marking segment came, but the marker reference array is already filled. Dropping this request.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER_MARK-7-NOT_FOUND The given entry [hex] not found, dropping request

Explanation    The request for a page to be unmarked came, but no such marking was found in the reference array.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DUMPER_SNAP Messages

Error Message     
 
    
    
   

%OS-DUMPER_SNAP-3-INSANE Coredump request rate exceeds sanity threshold - restarting process

Explanation    The process explicitly configured a threshold of how many non-invasive voluntary coredump requests should be permitted before deeming the process insane. This has been exceeded, and so the process is being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER_SNAP-4-DUMP Process [dec] requested voluntary [chars] dump of itself

Explanation    A non-invasive voluntary coredump requested by the process. Process might be experiencing a condition which needs investigation. This core file will help analyzing the issue.

Recommended Action    This should not occur in normal conditions, please provide the coredump to TAC.

Error Message     
 
    
    
   

%OS-DUMPER_SNAP-4-NODUMP Problem with voluntary core dump requested by [dec] when [chars]: [chars]

Explanation    A non-invasive voluntary coredump was requested by the process, and was within the configured rate-limit, but a problem occurred that prevented the coredump from being created.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER_SNAP-6-DUMP_OK Voluntary core dump requested by process [dec] completed

Explanation    A non-invasive voluntary coredump requested by the process completed successfully. Process might be experiencing a condition which needs investigation. This core file will help analyzing the issue.

Recommended Action    This should not occur in normal conditions, please provide the coredump to TAC.

Error Message     
 
    
    
   

%OS-DUMPER_SNAP-6-LIMITED Coredump request would exceed configured rate-limit

Explanation    A non-invasive voluntary coredump was requested by the process, but was declined since this would exceed the configured rate-limit.

Recommended Action    None, this is benign.

DUMPER Messages

Error Message     
 
    
    
   

%OS-DUMPER-3-CORE_FILE_TOO_SMALL Too small size [dec] for [chars]

Explanation    Core dump file resulted in illegally small size

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-3-DLOPEN_FAILED dll loading [dec] failures: [chars] is [chars]

Explanation    Dumper startup failed because loading some of dlls failed. Most likely cause is memory running low.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-3-GET_MAPPING_INFO_FAILED Core dump failed for [chars] in getting map info. Error: [chars]

Explanation    Core dump failed because getting map info failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-3-MAP_INFO_FAILED Core dump for [chars] failed due to process information not available

Explanation    Core dump failed because the process information is not available.

Recommended Action    Possible Work Around: If there was dumper malloc failure, try following command for failed process. 'show proc failed_process_name | include COPY' If it would produce something like following output, core: other_option COPY then dumper COPY option is enabled for this process and it temporary consume a lot of memory, so it might be one of the cause of the memory shortage problem. If that is the case, then specifying following command for failed process will reduce the temporal memory usage of the process, thus it might work around the problem. 'proc failed_process_name core other_option'

Error Message     
 
    
    
   

%OS-DUMPER-3-PATH_FAILED Core dump for [chars] failed due to lack of working dump path choice

Explanation    Core dump failed because there is no working dump path.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-3-SELECT_SEGMENTS_FAILED Core dump for [chars] failed in selecting process segments

Explanation    Core dump failed because selecting process segments in sparse mode failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-3-SET_RLIMIT_FAIL Failed to set resource limit data. soft limit: [hex] hard limit: [hex] Error([dec]): [chars]

Explanation    Failed to set resource limit data

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-3-STACK_SIZE_INVALID Stack size [dec] [chars] at [chars]:[dec]

Explanation    Stack size of target process is invalid.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-3-TIMER_PROBLEM Timer [chars] failure. Error: [chars]

Explanation    Something went wrong with the timer

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-3-WRONG_COMP_MAGIC_NUMBER Wrong file magic number [hex] [hex] [hex] for [chars]

Explanation    Core dump file compression header is broken.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-4-BUS_ADRALN Signal code [dec] - BUSADRALN. Invalid address alignment @ address [hex]

Explanation    Bus error generated due to invalid address alignment. Program is trying to read or write data that does not fit the CPU's memory alignment rules.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-BUS_ADRERR Signal code [dec] - BUSADRERR. Trying to access non-existent physical address [hex] at PC [hex]

Explanation    The CPU is instructed by software to read or write a specific physical memory address that is non-existent

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-BUS_OBJERR Signal code [dec] - BUSOBJERR. Object specific hardware error caused accessing address [hex] at PC [hex]. Error [dec] - [chars]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-CORE_INFO Core for pid equals [dec] ([chars]) requested by [chars]@[chars]

Explanation    Debug core info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-CORE_PAGE_LOST [chars] core COPY option enabled but free memory:[unsigned long int] is not enough for the next segment:0x[pointer](size [unsigned long int]) and succeeding ones. Use 'exception memory-threshold percentage_in_total_memory' to change the minimum free memory threshold.

Explanation    Not enough free memory to continue COPY option core dump, which allocate local memory for each memory segment.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-CRASH_INFO Crashed pid equals [dec] ([chars])

Explanation    Debug crash info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-DEVCTL_FAILED Devctl Code: [dec] failed. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-DLL_HANG Thread which is spawned to collect DLL information (ID [dec]) is not responding.

Explanation    Thread to collect DLL info seems to be blocked. Probably DLL mgr is not responding.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_MEM_ALIGN Memory addr:[hex] not aligned :[chars] at [dec]

Explanation    Core dump failed because the pending segment flush failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_MEM_ALLOC Malloc (size:[dec]) failed :[chars] at [dec]

Explanation    Memory running low

Recommended Action    Reboot the router

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_PATHMGR_SYMLINK Pathmgr symlink failed [chars] [chars] . Error: [chars] errno [hex]

Explanation    Pathmgr symlink failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_QSM_ADD_SERVICE QSM publish dumper path failed [chars] [chars] . Error: [chars] errno [hex]

Explanation    QSM publish dumper path failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SP_INVAL Stack Pointer:[hex] is corrupted Base [hex], Top [hex]:[chars] at [dec]

Explanation    Core dump failed because the stack pointer is corrupted.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_APPLY Failure in verification apply handler for [chars]. [chars]

Explanation    Error in apply handler

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_BIND [chars]: Unable to bind to [chars]. Error: [chars]

Explanation    Could not connect to sysdb

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_GET [chars]: Could not get [chars] [chars]

Explanation    Could not get sysdb item.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_NOTIFY Failure in notification handler for [chars]. [chars]

Explanation    Error in notify handler

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_REG_NOTIFY Sysdb notifier registration for [chars] failed. Error: [chars]

Explanation    Sysdb notifier registration failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_REG_VERIFY Sysdb verifier registration for [chars] failed. Error: [chars]

Explanation    Sysdb verifier registration failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_SET [chars]: Could not set [chars] [chars]

Explanation    Could not set sysdb item.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSDB_UNBIND Unable to unbind from [chars]. Error: [chars]

Explanation    Could not disconnect to sysdb

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSMGR_REG_LREVT Sysmgr LR evt registration failed. Error: [chars] errno [hex]

Explanation    Sysmgr LR event registration failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-ERR_SYSMGR_REG_REDST Sysmgr redundancy state registration failed. Error: [chars] errno [hex]

Explanation    Sysmgr redundancy state registration failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-FLT_STACK Signal code [dec] - BUSADRERR. Failed to map stack @ PC [hex]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-MEMORY_PROTECT_FAILED memory protection for addr:0x[pointer] size:[hex] mode:[hex] failed. Error: [chars]

Explanation    Probably software bug, or OS bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-PARITY_ERROR Core dump for process [chars] is aborted as cause for the crash is hardware specific error. Check for signal related logs from dumper for more details

Explanation    Core dump is aborted if the cause for the crash is hardware specific error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-PROCESS_OPTIONS_INIT_FAILURE Failed to init process options database. Error([dec]): [chars]

Explanation    Dumper failed to initialize process core options database.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-4-SHOW_REGISTERS_FAILED show registers call failed

Explanation    Could not get the registers context for the process being dumped. This could happen if a core dump is explicitly requested of a running or suspended process using dumpcore command. If not it is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGBUS_INFO Thread [dec] received SIGBUS - Bus error

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGEMT Thread [dec] received SIGEMT - Mutex deadlock signal

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGFPE_INFO Thread [dec] received signal SIGFPE - Floating point exception caused accessing address [hex] at PC [hex]. Signal code [dec] - [chars]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGILL Thread [dec] received SIGILL - Illegal instruction, accessed BadAddr [hex] at PC [hex]. Signal code [dec] - [chars]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGNAL_NUMBER Thread [dec] received SIGNAL [dec], si code [dec], si errno [dec]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGNALCORE_INFO Core for pid equals [dec] ([chars]) as signal [dec] sent by [chars]@[chars]

Explanation    Debug core info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGSEGV Thread [dec] received SIGSEGV - Segmentation Fault

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-SIGSEGV_INFO Accessed BadAddr [hex] at PC [hex]. Signal code [dec] - [chars]

Explanation    Signal info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-4-UNKNOWNCORE_INFO Core for pid equals [dec] ([chars]) requested by Unknown

Explanation    Debug core info

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-5-CORE_FILE_NAME Core for process [chars] at [chars] on [chars]

Explanation    Name of the core file

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-5-CORE_TRANSFER_STATUS Transfer of Core file from [chars] to [chars] on [chars] [chars]

Explanation    Status of the core dump transfer to persistent location.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-5-DUMP_FAILURE Core dump failed: [chars] [chars] [unsigned long int]

Explanation    Could be any number of reasons. Check for other error messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-5-DUMP_SUCCESS Core dump success

Explanation    Core dump succeeded

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-5-LTRACE_INIT Dumper ltrace init failure. Error([dec]): [chars]

Explanation    Failed to initialize dumper ltrace buffer

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-5-TIMEOUT dumper will be restarted due to watchdog timeout

Explanation    dumper restarted due to watchdog timeout.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-5-TMP_PATH_FULL [chars]

Explanation    /tmp/dumper is not available because it is full of files still being transferred.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-BAD_PATH Choice [dec]([chars]) either not configured or bad path [chars] at [dec]. Trying next choice.

Explanation    Could be any number of reasons. Check for other error messages.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-BOOT_DEVICE_FAILURE Failed to get boot device for local node:[chars]

Explanation    Failed to determine the boot device for a RP

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-COMPRESS_OFF Compress for the file [chars](fd:[dec]) is disabled. Returned val is [dec]. Error:[dec]([chars]). The file will become uncompressed one with .Z suffix.

Explanation    Compress library initialization for the file failed. The file will become uncompressed one with '.Z' suffix.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-CORE_DUMP_OFF Core for process [chars] turned off

Explanation    The core for the process has turned off deliberately

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-CORE_FILE_NAME_UNAVAIL Could not get core file name for crash

Explanation    The core dump file name for this crash is invalid.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-CORE_FILE_OPEN_FAILED Dump to path [chars] fails. Error: [chars]

Explanation    Could not open a file to dump core.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-CORE_MD5 [chars] [chars] size:[unsigned long int] md5:[chars]

Explanation    Keep core file md5 information to identify later file corruption.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-COREDUMP_TIMEOUT_CANCEL Core dump [chars] is cancelled. Started at [chars]. Not likely to finish within its max core dump time, [dec] seconds.

Explanation    A process core dump has been cancelled as it is not likely to finish within the indicated max core dump time. Reasons could be it has been pending in the process dumper waiting queue too long, or that the core dump itself took too much time.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-CORRUPT_CONTEXT Dumper context information is corrupted, throwing it away

Explanation    Looks like the core context information dumper stores is corrupted. The context is being reset, all existing context information will be lost.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-DEFAULT_PATH_TMP [chars]

Explanation    Notify that the default path has been set to /tmp/dumper

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-ERR_SYSMGR_CORE_OPTIONS Failed to get process core options from the process init/startup file. Error([dec]): [chars]. Default options will be used.

Explanation    Dumper failed to get process core option values from the process init/startup file. Typically because the process doesn't provide its init/startup file, or rarely because dumper shared memory for keeping process core options are corrupted.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-FALLBACK_CHOICE Fall back choice: [chars]%s[chars]

Explanation    Could be any number of reasons. Check for other error messages.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-FALLBACK_CHOICE_BOOT_DEV Fallback choice is on boot device of local or remote node.

Explanation    The fallback choice is on the boot device for either the local node or the remote node. This device would be skipped as dump device choice to prevent dumper filling it up with core dumps.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-GET_PROC_CISCO devctl DCMD_PROC_CISCO failed with size:[dec]. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-GET_PROC_CURTHREAD_FAILED devctl DCMD_PROC_CURTHREAD failed for [chars] with tid:[dec]. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-GET_PROC_GETGREG_FAILED devctl DCMD_PROC_GETGREG failed for [chars]. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-GET_PROC_TIDSTATUS_FAILED devctl DCMD_PROC_TIDSTATUS failed for [chars]. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-GET_PROCINFO_FAILED devctl DCMD_PROC_INFO failed for [chars]. Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-6-MSGREPLY_CONFIRMED Reply to client is confirmed

Explanation    Reply to client could have been missing, so did reply at the end.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-NO_SP_INFO No sub processor information on this card.

Explanation    No sub processor information found on this card. Display the local node information instead.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-NODE_NAME_FAIL Failed to get the local nodes internal node name

Explanation    Failed to get the local node name from platform library.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-NODEID_FAIL Failed to get the local nodeid.

Explanation    Failed to get the local nodeid from platform library.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-ONLY_CONTEXT Displaying just the context information as Core for process [chars] turned off

Explanation    The core for the process has turned off deliberately

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-PENDING_SEGMENT_FLUSH_FAILED Core dump failed in pending segment flush

Explanation    Core dump failed because the pending segment flush failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-POPULATE_FILTERS_FAILED Core dump failed in populating filters

Explanation    Core dump failed because populating filters for the process mapinfo failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-READ_TEXT_DUMP_FAIL Failed to read from text dump file:[chars]. Error:[chars]

Explanation    Failed to read from the text dump file.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-REMOVE_OLDEST Removing dump [chars] as we can have only limited number of cores in fallback path

Explanation    Memory limitation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SAVE_SEGINFO_FAILED Core dump failed at [dec] in saving segment info

Explanation    Core dump failed because the saving segment info failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SCAN_DLLDATA_FAILED Core dump failed at [dec] in scanning the dll data

Explanation    Core dump failed because scanning the dll data failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SCAN_PROCDATA_FAILED Core dump failed in scanning the process data

Explanation    Core dump failed because scanning the process data failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SCAN_REGISTERS_FAILED Core dump failed in scanning registers

Explanation    Core dump failed because scanning registers for the process failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SCAN_STACK_FAILED Core dump failed in scanning stack

Explanation    Core dump failed because scanning stack for the process failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SPARSE_CORE_DUMP Sparse core dump as [chars]

Explanation    The core for the process is sparse dump

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-SYSTEM_CALL_TIMEOUT Timer started last time at [chars] for [dec] seconds timeout.

Explanation    This syslog msg is printed out when a system call blocked too long, and is unblocked forcibly by internal timeout mechanism. This msg logs the timestamp when the timer started last time, and the timeout value specified for that.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-TREEWALK_FAILED Core dump failed in sparse tree walk

Explanation    Core dump failed because the sparse tree processing failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-UNLINK_CORE_FAILED Unlink of [chars] failed. Error: [chars]

Explanation    Could not delete a file

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-6-USAGE Usage: [chars] [-h]

Explanation    Usage information.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-WORKER_THREAD_BUSY Too many dump request simultaneously

Explanation    Too many processes crashes or dump request simultaneously

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-6-WRITE_TEXT_DUMP_FAIL Failed to write to text dump file:[chars]. Error:[chars]

Explanation    Failed to write to the text dump file.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-7-BAD_CORE_SIZE Bad core file size, Expecting: [dec], Collected: [dec]

Explanation    Could not collect the entire core file data

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-CLOSE_PROBLEM [chars]:[dec] [chars] failed. Error: [chars]

Explanation    Possibly the server died.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-CORE_CONFLICT [chars] core dump is cancelled. The same name core is still being transferred from /tmp

Explanation    This happens when a process requests repeating core dump, and the next core dump is requested while the previous core was temporary dumped to /tmp, and still being transferred from /tmp.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-DEBUG_INIT_FAILED [chars]

Explanation    Debug init failed

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-DLL_INFO [chars] [hex] [hex] [hex] [hex] [dec]

Explanation    Dll information for the process being dumped

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-DLL_INFO_HEAD DLL path Text addr. Text size Data addr. Data size Version

Explanation    Heading for dll info being printed

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-DUMP_ATTRIBUTE Dump request with attribute [hex] for process [chars]

Explanation    The information message for debug use.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-DUMP_CORE_FAILURE Core dump failed: Could not create core

Explanation    Could be any number of reasons. Check for other error messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-DUMP_INFO_PROBLEM Dump Info [chars] failure. Error: [chars]

Explanation    Something went wrong with the dump information storage scheme

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-DUMP_REQUEST Dump request for process [chars]

Explanation    The information message for debug use.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_EVM_CREATE [chars]: can't create event manager. [chars]

Explanation    Failed to create event manager for the process

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_EVM_EVENT_BLOCK event_block error -- [chars]

Explanation    Error during event block

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_EVM_FILE_ATTACH [chars]: can't attach resmgr funcs '[chars]'

Explanation    Failed to attach pathname to the process

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_EVM_MSG_ATTACH can't attach event msg funcs for [chars]. Error: [chars]

Explanation    Failed to register event callback functions

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_SYSDB_DATALIST Failed call : [chars]. Error [chars]

Explanation    Unexpected failure for sysdb datalist.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_SYSDB_ITEM Bad item : [chars]. [chars]

Explanation    Unexpected or bad item under config for dumper

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_SYSDB_ITEM_TYPE Bad item type for [chars]

Explanation    Unexpected item type in dumper config

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_ATTRIBUTE [chars]: [chars] failed: [chars]

Explanation    Could not attribute a thread. Check for other error messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_COND [chars]: [chars] failed: [chars]

Explanation    Could not cond_wait a thread. Check for other error messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_CREATE [chars]:[dec] [chars]: [chars] failed: [chars]

Explanation    Could not create a thread. Check for other error messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_JOIN thread timed join operation failed: [chars]

Explanation    A internal timed thread join operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_MUTEX_DESTROY mutex operation [chars] failed for mutex_destroy mutex: [chars]

Explanation    A internal mutex operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_MUTEX_INIT mutex operation [chars] failed for mutex_init mutex: [chars]

Explanation    A internal mutex operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_MUTEX_LOCK [chars]:[dec] mutex operation [chars] failed for loc_mutex mutex: [chars]

Explanation    A internal mutex operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERR_THREAD_MUTEX_UNLOCK [chars]:[dec] mutex operation [chars] failed for unlock_mutex mutex: [chars]

Explanation    A internal mutex operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-ERROR [chars]: Unexpected error: [chars]

Explanation    Encountered an unexpected internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-FAIL_DEBUG_REG [chars]: Can't connect to configuration, [chars]

Explanation    DUMPER debugging service register to sysdb failed.

Recommended Action    Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available.

Error Message     
 
    
    
   

%OS-DUMPER-7-FILE_TOO_SMALL Too small size [dec] for [chars]. Expected:[dec]

Explanation    A file is found to be too small size than expected.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-7-FILE_VERSION_MISMATCH file:[chars] size:[dec] has version:[dec] which is different from expected_version:[dec]

Explanation    A file has invalid version than expected.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-7-GET_FSLIST_FAILED [chars]: unable to read platform dependent file system

Explanation    Most probably some problem with the file systems data file

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-GET_MAPINFO_FAILED devctl DCMD_PROC_MAPINFO failed, Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-GET_PAGEDATA_FAILED devctl DCMD_PROC_PAGEDATA failed, Error: [chars]

Explanation    A devctl failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-INSTALL_PKG [chars] V [chars][[chars]] [chars] [chars] at [chars] [chars]

Explanation    Active installed packages

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-INSTALL_PKG_SHOW_FAILED active installed packages show failed: [chars]

Explanation    Install manager might have died

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-INVALID_PATH [chars] not a valid path or not supported

Explanation    most probably tried to configure an unsupported path e.g. rcp.

Recommended Action    'Configure a valid path'

Error Message     
 
    
    
   

%OS-DUMPER-7-KERNEL_INFO_MMAP_FAILURE Could not map kernel dumper information. [chars]

Explanation    Space might not have been allocated for storing kernel dump information

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-MKDIR_FAILED mkdir for path [chars] failed, error: [chars]

Explanation    Something wrong

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-7-MMAP_FAILED [chars]:[dec] Map of file descriptor [dec] for size [dec] Offset [hex] failed: [chars]

Explanation    Something wrong

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-MSGERROR_FAILED Failed to reply to client. Error: [chars]

Explanation    Could not reply to client

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-DUMPER-7-MSGREPLY_FAILED Failed to reply to client. Error: [chars]

Explanation    Could not reply to client

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-MUNMAP_FAILED Unmap for size [dec] at Address 0x[pointer] failed: [chars]

Explanation    Something wrong

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-NO_FREE_SPACE_INFO No space information available

Explanation    Something wrong

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-NO_OS_DEBUG_INFO No OS debug info available at system page:[pointer]

Explanation    OS debug info is not ready yet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-OPEN_FAILED Open of path [chars] failed at [chars]:[dec]. Error: [chars]

Explanation    Could not open a file

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-OS_DEBUG_INFO_MAP_FAILED Memory map for OS debug info([chars]) at [hex] failed. Error([dec]): [chars]

Explanation    Memory mapping of OS debug info has failed. Check the error code for the direct cause of the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-PROC_OPEN_FAILED Fail to open process, pid equals [dec]. Error equals [chars]

Explanation    Could not open the process file system

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-PROC_OPTION_INDEX_ERROR Process core options shared memory could be corrupted. Wrong process option index:[dec] for total options size:[hex] at [chars]:[dec]

Explanation    An inconsistent process core option index value is found for the total size. Shared memory for keeping process core options could be corrupted by someone. Probably software bug, or OS bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-PROC_OPTIONS_CORRUPTED Process options shared memory could be corrupted. Cksum:[hex] Calculated cksum:[hex] process option numbers(corrupted?):[dec]

Explanation    Shared memory for keeping process core options is corrupted. Dumper could have been restarted while it's touching the shared memory. If not, this could be software or OS bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-PROC_PAGES Process memory pages [dec]

Explanation    The total memory page number of dumper target process

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-7-PROCESS_NAME_FAILED No process name information available, using pid as name instead: [chars]

Explanation    Something wrong

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-READ_FAILED Read of size [dec] to fd [dec] at offset [hex] failed, read [dec] Error: [chars]

Explanation    Most probably some problem with the procfs file system

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-REGISTERS_INFO [chars]

Explanation    This is the register contents at the time of the crash for the crashed process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-REMOVE_LOWMEM Removing dump [chars] as we are in low memory condition

Explanation    Memory running low

Recommended Action    Reboot the router

Error Message     
 
    
    
   

%OS-DUMPER-7-SEEK_FAILED lseek to vaddr [hex] with fd [dec] failed. Error: [chars]

Explanation    Most probably some problem with the procfs file system

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-SKIP_CPU_INFO CPU info is not created as it's requested by the target process [chars]. Check 'show exception core-options process process_name' outputs for the up-to-date process core option values.

Explanation    Skipped CPU info dumping in OS debug info, as it's requested by the target process. Down time critical processes which can't afford extra core dump time due to CPU info, might request this skipping.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-DUMPER-7-SYSMGR_CALL Failed call : [chars]. Error [chars]

Explanation    Unexpected failure for sysmgr call.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-TRACE_BACK #[dec] [hex]

Explanation    Trace back

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-DUMPER-7-TRACE_BACK_ERROR [chars]

Explanation    Some error happened in trace back operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-TRACE_BACK_FAILED Stack trace back failed

Explanation    Could not figure out trace back

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-UNKNOWNCARD Dumper unknown card

Explanation    Platform card type unknown to dumper.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-UNLINK_FAILED Unlink of [chars] failed. Error: [chars]

Explanation    Could not delete a file

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-DUMPER-7-WRITE_FAILED Write of size [dec] to fd [dec] failed. Written [dec]. Error: [chars]

Explanation    Most probably some problem with the file system

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EVM Messages

Error Message     
 
    
    
   

%OS-EVM-1-CORRUPT_MLIST [chars]: attached-message list corrupted -- [[dec],[dec]] overlaps [[dec],[dec]]

Explanation    An Event Manager list of attached messages was found to be corrupt.

Recommended Action    This is an internal error and should be reported to TAC. A memory dump should be taken (to assist TAC) and the application should be restarted.

Error Message     
 
    
    
   

%OS-EVM-1-FLAGS [chars]: invalid event manager flags -- [hex]

Explanation    An Event Manager call was made with an invalid flag argument.

Recommended Action    This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted; if that fails, the router should be rebooted.

Error Message     
 
    
    
   

%OS-EVM-1-QSM [chars]: call to qsm_add_service([chars], [chars]) failed -- [chars]

Explanation    A call to the QSM API failed. The server was not able to advertise itself.

Recommended Action    This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted; if that fails, the router should be rebooted.

Error Message     
 
    
    
   

%OS-EVM-1-SIGPATCH [chars]: unexpected signal [dec] received

Explanation    The Event Manager signal handler should never be invoked directly.

Recommended Action    This is an internal error and should be reported to TAC.

Error Message     
 
    
    
   

%OS-EVM-1-TIMEOUT [chars]: timeout call failed, handle [hex]

Explanation    An Event Manager blocking call was made with an invalid timeout specification.

Recommended Action    This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted; if that fails, the router should be rebooted.

Error Message     
 
    
    
   

%OS-EVM-3-MUTEX_LOCK mutex lock error: ([chars]:[dec])

Explanation    An Event Manager library function was not able to lock mutex.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-EVM-3-MUTEX_UNLOCK mutex unlock error: ([chars]:[dec])

Explanation    An Event Manager library function was not able to unlock mutex.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-EVM-4-EMPTY_PATH registering empty path name without specifying _RESMGR_FLAG_FTYPEONLY flag, flags equals [hex]

Explanation    A server process has registered empty path name with the path manager without specifying _RESMGR_FLAG_FTYPEONLY flag. This may lead to undesired behavior like receiving requests intended for some other server process (when the other server process is restarted).

Recommended Action    This is an internal error and should be reported to TAC. The application process making the call might have passed incorrect path name.

Error Message     
 
    
    
   

%OS-EVM-4-FATTACH [chars]: event_file_attach failure for fd [dec], cond [dec]: [chars].

Explanation    An ionotify call to request file-state notification failed.

Recommended Action    This is an internal error and should be reported to TAC. The server process for the failed fd has died or there is a connectivity failure. If it can be determined which server failed, it and the application with the ionotify error should be restarted. If that fails, the router should be rebooted.

Error Message     
 
    
    
   

%OS-EVM-4-HANDLE [chars] event manager handle -- [hex]

Explanation    An Event Manager call was made with an invalid or corrupted event manager handle.

Recommended Action    This is an internal error and should be reported to TAC. The application process making the call has corrupted data or some other internal error. The application should be restarted for the invalid event manager handle; if that fails, the router should be rebooted.

Error Message     
 
    
    
   

%OS-EVM-4-IONOTIFY_FAIL ionotify failed during reregistration on fd: [dec], error: [chars], attempt [dec] of [dec], Server info: nd [hex], pid: [dec], chid: [hex], scoid: [hex]

Explanation    Event-manager is unable to reregister for subsequent notifications with a server.

Recommended Action    This is an internal error and should be reported to TAC if all attempts fail. Please collect the output of 'show proc files jobid detail location location' for the process in question.

Error Message     
 
    
    
   

%OS-EVM-4-RMCONTEXT [chars]: could not allocate memory for Resource Manager context

Explanation    The Event Manager could not allocate memory to construct a Resource Manager context when delivering an RM message.

Recommended Action    Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.

Error Message     
 
    
    
   

%OS-EVM-4-SIGACTION [chars]: could not install signal handler for signal [dec] [chars]

Explanation    The Event Manager signal thread must install a signal handler for each signal that it is watching.

Recommended Action    This is an internal error and should be reported to TAC.

Error Message     
 
    
    
   

%OS-EVM-4-SIGHEAP [chars]: could not allocate memory to deliver signal [dec] [attempt [dec] of [dec]]

Explanation    The Event Manager signal thread could not allocate memory needed to deliver a signal message to the Event Manager message channel. The Event Manager will try to work around the problem by sending itself the same signal a few times.

Recommended Action    Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.

Error Message     
 
    
    
   

%OS-EVM-7-HEAP [chars]: could not allocate from heap

Explanation    An Event Manager library function was not able to obtain HEAP memory space.

Recommended Action    Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.

FILECOPY_LIB Messages

Error Message     
 
    
    
   

%OS-FILECOPY_LIB-3-BAGDECODE An attempt to decode a file copy bag failed when [chars]

Explanation    An attempt to decode a file copy bag failed. This may be due to like low memory. You may need to free some resources from other processes if the system is running low on memory - if freeing up resources does not fix the problem, please contact your customer support representative and file a bug against the infra-file copy-srv component.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY_LIB-3-BAGENCODE An attempt to encode a file copy bag failed when [chars]

Explanation    An attempt to encode a file copy bag failed. This may be due to like low memory. You may need to free some resources from other processes if the system is running low on memory - if freeing up resources does not fix the problem, please contact your customer support representative and file a bug against the infra-file copy-srv component.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY_LIB-3-NOMEM Insufficient memory to [chars]

Explanation    No memory to perform bag operations.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY_LIB-3-NULLARGS --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY_LIB-3-SYSDBFAIL A sysdb operation failed when [chars]

Explanation    An attempt to retrieve (or set) a sysdb item or list failed. This could be a transient problem that may be fixed by restarting the filecopy_process - note well that restarting this process could result in loss of data. If restarting the process does not solve this problem, please capture any contextual information from the CLI, contact your customer support representative and file a bug against the infra-file copy-srv component.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FILECOPY Messages

Error Message     
 
    
    
   

%OS-FILECOPY-3-BAGREGFAILED Failed to register filecopy bags during startup of filecopy_process

Explanation    The filecopy_process was unable register its bags during startup. This will result in the filecopy_process being terminated. The problem may be due to a transient condition like low memory. Try restarting the filecopy_process - you may do this by creating a new ccCopyEntry row in the CISCO-CONFIG_COPY-MIB. If the problem persists after a few tries, please open a bug and include the release number for the infra/filecopy/server component, the logged error message containing the traceback and a copy of the running-configuration at the time of the error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-3-EVMCREATE Could not create event manager for the filecopy_process

Explanation    The filecopy_process was unable to create an event manager. The filecopy_process will shut down since it cannot receive any events. Try restarting the process - if the error continues, contact customer support with the error message and associated context.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-3-NOMEM Insufficient memory to [chars]

Explanation    No memory to perform edm or bag operations.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-3-SIGATTACH Could not attach a handler function for the signal [chars]

Explanation    The filecopy_process was unable attach a handler for a signal. This could affect cleanup of open connections or allocated resources during shutdown, which could affect the filecopy_process' ability to restart in the future. The filecopy_process will attempt to shutdown in the hope that this problem is transient, and that a future attempt to start it will succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-3-SYSDBBIND Could not bind with SysDB

Explanation    The filecopy_process was unable to bind with sysdb. This means the process will be unable to communicate with its clients. Hence the filecopy_process will shut itself down.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-4-DEBUGINIT Could not register for debug notifications

Explanation    The filecopy_process was unable to register for debug notifications. If you have turned on debugging for this process, it will have no effect. However, the rest of the filecopy_process functionality should still be available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-4-NOTIFFAIL Failed to send a filecopy notification - [chars]

Explanation    The filecopy process failed to send a notification to its clients about a state-transition for a copy request. Users may find the reported duration of a copy operation to be quite large as a result, depending on how long it takes for a client to poll the filecopy_process to see if a state change occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-FILECOPY-4-SYSDBUNBIND Could not unbind with SysDB

Explanation    The filecopy_process was unable to unbind from sysdb when shutting down. This may result in a failure to re-register with sysdb when the process is restarted later.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FSM Messages

Error Message     
 
    
    
   

%OS-FSM-4-ANOMALY [chars]

Explanation    A SW exception occurred in FSM Library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSP_C12000 Messages

Error Message     
 
    
    
   

%OS-GSP_C12000-7-info [chars]

Explanation    --

Recommended Action    'No action is required.'

GSP_NOTIF Messages

Error Message     
 
    
    
   

%OS-GSP_NOTIF-3-msg_failed Failure to notify node state when [chars]: [chars]

Explanation    The internal communication channel is broken.

Recommended Action    Must restart the process.

gsp Messages

Error Message     
 
    
    
   

%OS-gsp-3-BAD_GRP_DELETE [chars]: [dec] members for group [dec] ([chars]) still exists: pid [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-CLIENT_LOCK_ERROR [chars]:[dec] Error in client locking of client id [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-CONDVAR_OP_FAILED [chars]:[dec] condvar op [chars] failed [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-ENS_INVALIDATE_HANDLE_FAILED [chars]:[dec] detect application error from mid [dec]:[dec]%d and [dec]:[dec]:[dec]. [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-ENS_MULTIPLE_PUBLISHERS_ERROR [chars]:[dec] ENS detects error in jid [dec], hdl [hex]:[dec], local-producer [dec]:[dec]:[dec], new-producer [dec]:[dec]:[dec].

Explanation    ENS supports single publisher multiple consumer model. There can be only one publisher per class-data handle. If ENS detects that more than one ENS client is trying to become publisher on a given handle, it prints above error message. It shows both existing producer and new producer. Triage case need to be logged on producer process component.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-FILE_OP_FAILED [chars]: File op [chars] failed. : [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-GET_MEM_FAILED [chars]:[dec] gs_get_mem or malloc failed (other [dec])

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-INCORRECT_RSI Inconsistent node-id received, expect:[hex], got [hex]:[dec] for group [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-LTRACE_INIT Ltrace init for file [chars] failed [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-MSG_ENQUEUE_ERROR Process [chars] (pid [dec]) not picking up messages, [dec] msgs dropped. [dec] msgs pending, taking [unsigned int] bytes

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-3-MUTEX_OP_FAILED [chars]: Mutex op [chars] failed on mutex [chars] ([chars]) : [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-node_insert_fail Can't insert node [hex] to node state map

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-3-PTHREAD_OP_FAILED [chars]:[dec] pthread op [chars] failed [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-3-script_failed Couldn't spawn script: [chars] failed, rc: [chars]

Explanation    Failed to run a script to collect debug information.

Recommended Action    None.

Error Message     
 
    
    
   

%OS-gsp-3-TRACEBACK gsp traceback [chars]

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-3-UPDATE_ADDR Can not add node [hex] to group [chars](gid [dec]), error [dec]

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-3-WRONG_FLOW [chars]: wrong flow zone info

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-6-INFO [chars].

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-7-DEBUG [chars].

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-7-FUNC_ERROR Function [chars] returned error: [chars]

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-7-MSG_QUEUE_LONG Process [chars] (pid [dec]) not picking up messages, [dec] msgs pending, taking [unsigned int] bytes

Explanation    --

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%OS-gsp-7-RCV_OWN_MSG Received own mcast on gid [dec]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-gsp-7-script_spawn [chars] spawn show tech gsp at the request of [chars]

Explanation    Start/Complete spawning a script

Recommended Action    None.

Error Message     
 
    
    
   

%OS-gsp-7-send_mcast_failed [chars] returned error: [chars] for node [hex] state [dec] with seq [dec]

Explanation    --

Recommended Action    'No action is required.'

INIT Messages

Error Message     
 
    
    
   

%OS-INIT-2-MBI_BOOT_HOLD_TIMEOUT mbi boot hold was not released after [dec] seconds, resetting node

Explanation    An application set the MBI boot hold and it was not released within the specified timeout. This could indicate that the node is having problems and will be reset.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-INIT-4-INSTALL_TIMEOUT installation still not done after [dec] seconds, wait continuing

Explanation    The package installation sync did not complete in time. This could indicate that the node is hung and may require a reset.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-INIT-7-INSTALL_READY total time [dec].[dec] seconds

Explanation    The package installation software is now ready. This is not an error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-INIT-7-INSTALL_THRESHOLD_EXCEEDED package install time threshold of [dec] seconds has been exceeded, continuing

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-INIT-7-MBI_STARTED total time [dec].[dec] seconds

Explanation    The MBI processes have all been started. This is not an error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-INIT-7-MBI_THRESHOLD_EXCEEDED MBI bootup exceeded threshold of [dec] seconds, continuing

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

ISIS_MIB Messages

Error Message     
 
    
    
   

%OS-ISIS_MIB-3-ERR_ALLOC A general allocation failed

Explanation    An allocation has failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-ISIS_MIB-3-ERR_BAG_DECODE Failed to decode a trap event bag: [chars] ([hex])

Explanation    The agent was unable to decode the bag representing a trap event.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-ISIS_MIB-3-ERR_INIT [chars] : [chars] ([hex])

Explanation    Initialization failed

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Enable 'debug snmp isis', restart the process snmpd and cause the isis mib to be loaded.

Error Message     
 
    
    
   

%OS-ISIS_MIB-3-ERR_MAKE_VAR_BIND Allocation failed for Var OID [chars] ID [dec] SNMP type [dec] value [hex]

Explanation    An allocation has failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ITAL_SHM Messages

Error Message     
 
    
    
   

%OS-ITAL_SHM-3-ERR_RESOURCE [chars] failed: [chars]

Explanation    Some error occurred in operations related to resource allocation. The text of the message displays the failed operation and the related error code. The system will try to re-acquire the resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL_SHM-7-ERR_GENERAL [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL_SHM-7-ERR_INIT ITAL initialization failed: [chars]

Explanation    Initialization of ITAL failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL_SHM-7-ERR_INIT_DEBUG ITAL debug init failed: [chars] ([chars])

Explanation    Initialization of ITAL failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ITAL Messages

Error Message     
 
    
    
   

%OS-ITAL-2-ERR_INIT ITAL lib not fully initialized: [chars], error code [chars]

Explanation    ITAL Initialization failed. The message displays the failed operation and the error code. ITAL connects with various servers to get required information for process from which it is invoked. It might lead to unstable state of the process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-2-ERR_THREAD_LOCK An attempt to lock ITAL dbase failed for [chars] dbase, caller [chars] holder [chars]

Explanation    An effort to lock database failed. The function which tried to lock as well as the function holding the lock are given in the message. The database might not reflect the expected behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-2-ERR_THREAD_UNLOCK An attempt to unlock ITAL dbase failed for [chars] dbase

Explanation    An effort to unlock database failed. The function which tried to unlock is given in the message. The database might not reflect the expected behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-3-ERR_DEBUG_INIT [chars] : [chars]

Explanation    Some error occurred in interactions with debug infrastructure. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-3-ERR_IF_NOTIF Invalid interface notification ([chars]) received: IfName equals [chars], IfHandle equals [hex]

Explanation    An invalid interface notification was received from one of the servers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-3-ERR_MEM_ALLOC Memory allocation ([unsigned int] bytes) failed for [chars]

Explanation    A memory allocation operation failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-ITAL-5-ERR_UNSUPPORTED [chars]

Explanation    Some client requires unsupported ITAL functionality.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-7-ERR_GENERAL [chars]: [chars]

Explanation    Certain operation failed due to unexpected error. The message displays the reasons.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-ITAL-7-ERR_REG [chars], reason: [chars]

Explanation    Registration operation with a certain server failed. The message displays the reasons.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. if message floods the console continuously and router is not able to recover from this situation.

Error Message     
 
    
    
   

%OS-ITAL-7-ERR_RETRY [chars], Retry Count equals [dec]

Explanation    Retry count exceeded the limit.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

KD_MBUS Messages

Error Message     
 
    
    
   

%OS-KD_MBUS-3-DEBUG_INIT_FAILED Debug event [chars] init failed ([chars])

Explanation    Initialisation of the specified debug event failed, the process is unable to start properly and will exit. The message may contain details about the failure and the error code indicates the type of failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-INIT_FAILED [chars] ([chars])

Explanation    A failure was returned from the infrastructure software, the process is unable to start properly and will exit. The message may contain details about the failure and the error code indicates the type of failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-KDUMPER_FILE_FAILED Unable to upload and/or save file [chars]

Explanation    The kernel dumper file upload and/or save on local media failed.

Recommended Action    Check indicated file location and filename. Check configured storage device for kernel dumper files. Change configuration of storage device for kernel dumper files if necessary. Or delete/squeeze device to get necessary space. Check log/trace for errors in operation of the kd_mbus_server process.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-KDUMPER_TRUNCATED Saved truncated file [chars] ([unsigned int] bytes)

Explanation    The kernel dumper file saved on local media is truncated.

Recommended Action    Check indicated file location and filename. Check configured storage device for kernel dumper files. Change configuration of storage device for kernel dumper files if necessary. Or delete/squeeze device to get necessary space. Check log/trace for errors in operation of the kd_mbus_server process. A partial uploaded file may occasionally still provide useful information.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-OPEN_FAILED Unable to open file [chars] for writing on any available storage media.

Explanation    The kernel dumper file writing failed on all available storage media.

Recommended Action    Check indicated file location and filename. Check configured storage device for kernel dumper files. Change configuration of storage device for kernel dumper files if necessary. Or delete/squeeze device to get necessary space.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-RC_FAILED [chars] with error ([chars])

Explanation    A non-fatal condition encountered - a function call returned an error. The error code indicates the type of failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-READ_FAILED Read from file [chars] (fd [dec]) failed ([chars])

Explanation    Reading from the specified file and storage media failed. The message may contain details about the failure. This does not have any other impact on the router functionality.

Recommended Action    Storage media might be full or corrupted. Check the integrity and the utilization of the storage media. A DDTS might be needed, depending on the outcome of the investigation.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-REOPEN_FAILED Re-opening file [chars] for reading failed ([chars])

Explanation    Re-opening the specified file and storage media failed. The associated KD uploaded file can not be recovered, the KD upload will fail. The message may contain details about the failure. This does not have any other impact on the router functionality.

Recommended Action    Storage media might be corrupted, damaged or removed while a KD upload in progress was stored on the device. Check the presence, integrity and the utilization of the storage media. A DDTS might be needed, depending on the outcome of the investigation.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-WRITE_FAILED Write of size [dec] to file [chars] (fd [dec]) failed ([chars])

Explanation    Writing to the specified file and storage media failed. The message may contain details about the failure. This does not have any other impact on the router functionality.

Recommended Action    Storage media might be full or corrupted. Check the integrity and the utilization of the storage media. A DDTS might be needed, depending on the outcome of the investigation.

Error Message     
 
    
    
   

%OS-KD_MBUS-6-FORCED_EXIT [chars]

Explanation    Intentional exit to restart clean, to keep things simple.

Recommended Action    Check the process ltrace and/or decode the included traceback to determine the condition leading to this decision, if desired.

Error Message     
 
    
    
   

%OS-KD_MBUS-6-KDUMPER_FILE_INFO Successfully wrote [chars] file ([dec] bytes) received from slot [dec].

Explanation    The kernel dumper file was successfully saved in the specified location.

Recommended Action    Check indicated file location and filename

Error Message     
 
    
    
   

%OS-KD_MBUS-6-KDUMPER_INFO [chars]

Explanation    The kernel dumper message.

Recommended Action    No action is needed.

Error Message     
 
    
    
   

%OS-KD_MBUS-7-DEBUG_REG_FAILED Debug event registration failed ([chars])

Explanation    Registration of the specified debug event failed, the respective debugging will not be possible. The message may contain details about the failure. This does not have any other impact on the router functionality.

Recommended Action    No action is required.

LGROUP Messages

Error Message     
 
    
    
   

%OS-LGROUP-3-ERROR [chars]: Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LIBDLLMGR Messages

Error Message     
 
    
    
   

%OS-LIBDLLMGR-4-OVERFLOW_DELETE Process had loaded more than 254 dlls (pid equals [dec]). We exclude dll-text from core file.

Explanation    An overflow encountered for the process. This is not an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-4-POSSIBLE_MISSING_INFO Given buffer size([dec]) is smaller than required, possible loss of dll-text segment in core file.

Explanation    Buffer given to the devctl routine is smaller than required. This will cause missing dll-text segment in the core file.

Recommended Action    Collect system log information. Collect 'show dll' information from the node which printed this message. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-4-SYSCALL [chars]: [chars](): [chars]

Explanation    A system call failed. The calling function, the failed call, and error are displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-4-UNEXPECTED_ARRAY_ADDR Unexpected array address: [pointer]: [pointer]: [pointer]

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-4-UNEXPECTED_MAGIC Unexpected magic value: [hex]

Explanation    An unexpected magic number encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-6-OVERFLOW_REPLACE Process had loaded more than 254 dlls (pid equals [dec]), process core file will have larger size than required. Replace dll-text info with [hex]-[hex]

Explanation    An overflow encountered for the process. This is not an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-7-OVERFLOW Process had loaded more than 254 dlls (pid equals [dec])

Explanation    An overflow encountered for the process. This is not an error.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%OS-LIBDLLMGR-7-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

LIBSYSMGR Messages

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-ALREADY_CALLED API [chars] already been called

Explanation    The specified API has already been called.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-INST_ERR [chars]: software upgrade error ([dec], [dec])

Explanation    Inconsistent file count between given and in the file list.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-INTERNAL [chars]: sysmgr function [chars]() failed: [chars]

Explanation    The client library has failed a sysmgr function.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-INVALID_ARG [chars]: Invalid value [[dec]] for argument [[chars]] passed

Explanation    An application called the API with invalid value.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-NOMEM [chars]: failed to malloc [unsigned int] bytes

Explanation    The client library has failed to allocate the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-PARSE [chars]: parse error: [chars]

Explanation    An error was encountered whilst parsing the argument vector for a spawn script operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-3-SYSCALL [chars]: [chars]() failed: [chars]

Explanation    The client library has failed a system call.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-6-INFO [chars]: Node restart requested by pid [dec]

Explanation    Informational only.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-6-SCRIPT_TIMEOUT Script [chars] exceeded allotted time of [dec] sec and was killed.

Explanation    Script exceeded allotted time.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LIBSYSMGR-7-ERR Unsupported API [chars] called by process [chars]

Explanation    The call is not supported during MBI boot.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_LIB Messages

Error Message     
 
    
    
   

%OS-LPTS_LIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_LIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_LIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_MRT Messages

Error Message     
 
    
    
   

%OS-LPTS_MRT-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_MRT-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_MRT-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_PA_FF_CL Messages

Error Message     
 
    
    
   

%OS-LPTS_PA_FF_CL-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when calling the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF_CL-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when calling debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_PA_FF Messages

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-CLIENT_NOT_FOUND [chars]: The client structure associated with this client was not found

Explanation    An internal error was detected when trying find the internal client structure for a given operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-EVENT_BLOCK [chars]: failed to block waiting for Event Manager events: [chars]

Explanation    An internal error was detected when block waiting for Event Manager events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-EVENT_INIT_EVENT [chars]: could not initialize event structure: [chars]

Explanation    An internal error was detected when initializing a sigevent structure using event_init_event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-EVENT_UPDATE_FAIL Failure in the PA-FF update module: [chars] ([chars])

Explanation    An error was detected when initializing the event queue between two infrastructure module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-EVM_ASYNC_ATTACH [chars]: could not attach handler for Event Manager asynchronous event: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager asynchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-EVM_CREATE [chars]: could not create event manager: [chars]

Explanation    An internal error was detected when creating Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-GET_NODEID [chars]: Can't get my own nodeid: [chars]

Explanation    A call to platform_get_my_nodeid faild.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-INIT [chars]: initialization for PA Flow Forwarder I/O thread failed: [chars]

Explanation    An internal error was detected when initializing PA Flow Forwarder I/O thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-LRD_FAIL [chars]: error from lrd function [chars]: [chars]

Explanation    An internal error was detected when using a logical router daemon api

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-MALLOC [chars]: malloc [dec] bytes failed: [chars]

Explanation    An attempt to allocate memory failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-MSG_ATTACH_SYNC [chars]: failed to attach handler for Event Manager synchronous event: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager synchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-MSG_CLINFO_GET_DATUM [chars]: msg_clinfo_get_datum failed: [chars]

Explanation    An internal error was detected when accessing a client info structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-MSG_SEND_EVENT [chars]: msg_send_event failed: [chars]

Explanation    An internal error was detected when sending an Event Manager synchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-TIMER_CREATE [chars]: could create the timer: [chars]

Explanation    An internal error was detected when creating a timer using timer_create.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PA_FF-3-TIMER_SETTIME [chars]: could arm the timer: [chars]

Explanation    An internal error was detected when arming a timer using timer_settime.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_PIFIB Messages

Error Message     
 
    
    
   

%OS-LPTS_PIFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PIFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PIFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS_PREIFIB Messages

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-BACKEND_EDM [chars]: EDM backend function [chars] failed: [chars]

Explanation    An internal EDM backend function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-BAG [chars]: Bag function [chars] failed: [chars]

Explanation    An internal bag function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-BATCHING [chars]: Error [chars] during batching '[chars]' from hardware pre-ifib

Explanation    Hardware pre-ifib returned an error during a batching operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-BLC_UPDATE [chars]: BLC '[chars]' failed for interface handle: [hex]

Explanation    Bundle (vlan) interface update to local bundle (vlan) database failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-DATAPATH_CMD [chars]: Pre-IFIB datapath control command [chars] failed: [chars]

Explanation    The given Pre-IFIB datapath control command returns error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EDM_UNREG [chars]: failed to unregister EDM: [chars]

Explanation    An internal error was detected when trying to unregister EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-ENTRY_UPDATE [chars]: Error [chars] while updating entry with '[chars]' [hex]

Explanation    Error during entry delete or update.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVENT_BLOCK [chars]: failed to block waiting for Event Manager events: [chars]

Explanation    An internal error was detected when block waiting for Event Manager events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVENT_CONN_CREATE [chars]: could not create event connection: [chars]

Explanation    An internal error was detected when trying to create event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVENT_CONN_NOTIFY [chars]: could not set notify handler for connection open/close/error: [chars]

Explanation    An internal error was detected when trying to set notify handler for connection opens, closes and errors.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVENT_CONN_OPEN_ALL [chars]: could not open all event connections of this event manager: [chars]

Explanation    An internal error was detected when trying to open all event connections of one event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVM_CREATE [chars]: could not create event manager: [chars]

Explanation    An internal error was detected when creating Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVM_TM_ATTACH [chars]: could not set up a managed timer identifier: [chars]

Explanation    An internal error was detected when trying to allocate a managed timer identifier and assign to it an event handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-EVM_TM_LEAF_NEW [chars]: could not create a managed timer tree leaf: [chars]

Explanation    An internal error was detected when trying to create a managed timer tree leaf for the event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-HW_RETRY [chars]: Error [chars] during hardware retry to update entry in TCAM

Explanation    Hardware pre-ifib returned an error during a update retry operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-IIR_QUERY [chars]: Error [chars] during POS bundle member query from IIR for ifhandle [hex]

Explanation    Hardware pre-ifib returned an error during a batching operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-IM_CAPS_DATAPATH_CONTROL [chars]: the datapath control function for the capsulation failed: [chars]

Explanation    An internal error was detected when calling datapath control function for the capsulation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-INVALID_ARGS [chars]: Invalid arguments: [chars]

Explanation    The given argument is invalid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-INVALID_FLOW_TYPE [chars]: Invalid flowtype [dec]

Explanation    The flow type information is not valid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-IPSEC_FVRF Failure occurred in IPSEC FRVF client API: [chars]. reason: [chars]

Explanation    An error detected in one of the IPSEC-FVRF client APIs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-LRD_FAIL [chars]: error from lrd function [chars]: [chars]

Explanation    An internal error was detected when using a logical router daemon api

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-LTRACE_INIT [chars]: Initialization of lightweight tracing buffer '[chars]' failed: [chars]

Explanation    Lightweight tracing initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-MSG_CHAN_GLOBAL [chars]: failed to publish global directory channel: [chars]

Explanation    An internal error was detected when publishing a global directory channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-NOMEM [chars]: Not enough memory

Explanation    Memory low condition is detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PA_FF_OPEN [chars]: failed to connect to the Port Arbitrator as a Flow Forwarder: [chars]

Explanation    An internal error was detected when trying to connect to the Port Arbitrator as a Flow Forwarder.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PA_FF_RESET [chars]: Reset of BCDL group in LPTS PA/FF library failed: [chars]

Explanation    An internal error was detected when trying to reset the BCDL group for the LPTS Port Arbitrator/Flow Forwarder.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PA_UPDATE [chars]: Error [chars] during '[chars]' from PA

Explanation    Update from PA failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PARSE_INFLOW_CONFIG [chars]: could not read input flow config file: [chars]

Explanation    An internal error was detected when trying to parse the input flow configuration file.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PFI_IFH_BIND [chars]: Failed to connect to PFI Interface Handle Server: [chars]

Explanation    Failed to connect to PFI Interface Handle Server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-PIFIBM_INIT [chars]: failed to initialize Pre-IFIB Mgr: [chars]

Explanation    An internal error was detected when trying to initialize the Pre-IFIB Mgr.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-REASS_LIST [chars]: Corrupted reassembly server list received: num_nodes [dec]

Explanation    The list of reassembly servers is incorrect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-SYSDB [chars]: Sysdb function [chars] failed: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-SYSMGR_PROC_READY [chars]: failed to notify sysmgr that we are ready: [chars]

Explanation    An internal error was detected when trying to notify sysmgr that we are ready.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-3-VRF_UPDATE [chars]: VRF '[chars]' failed for VRF id: [hex]

Explanation    VRF update to attached VRFs database on LC failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-6-NETIO_DOWN Pre-IFIB can't establish connection to NetIO in [dec]:[dec]

Explanation    Pre-IFIB process can't establish connection to NetIO.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-6-NETIO_UP Pre-IFIB establish connection to NetIO after [dec]:[dec]

Explanation    Pre-IFIB process established connection to NetIO.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS_PREIFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LPTS Messages

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_BAD_LISTENER_TAG bad listener tag detected on the packet, dropping packet

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_BAG_ENCODE [chars]: SysDB Bag encoding failed: [chars]

Explanation    An internal error was detected when trying to encode a SysDB Bag.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_BAG_REG [chars]: SysDB Bag registration failed: [chars]

Explanation    An internal error was detected when trying to register a SysDB Bag definition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_DATAPATH_INPUT_LEN datapath control input buffer len error: length equals ([dec])

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_DEBUG_REG [chars]: debug register failed: [chars]

Explanation    An internal error was detected when trying to register for changes to debug tuples.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_ECM_CREATE [chars]: couldn't create event connection manager: [chars]

Explanation    An internal error was detected when trying to create event connection manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_ECM_OPEN [chars]: couldn't open event connection: [chars]

Explanation    An internal error was detected when trying to open event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_EDM_DATALIST_ADD [chars]: adding datalist as a SysDB EDM failed: [chars]

Explanation    An internal error was detected when trying to add an item to SysDB data list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_EDM_DATALIST_CREATE [chars]: adding datalist as a SysDB EDM failed: [chars]

Explanation    An internal error was detected when trying to create a SysDB data list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_EDM_REG [chars]: registering as a SysDB EDM failed: [chars]

Explanation    An internal error was detected when trying to register as a SysDB EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_EVM_CREATE [chars]: couldn't create event manager: [chars]

Explanation    An internal error was detected when trying to create event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_FINT_MEDIA_REG Couldn't set control mapping for lpts media on fint

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_HSSD [chars]: [chars] failed

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_HSSD_GET_DATA [chars]: retrieving data from HSSD failed: [chars]

Explanation    An internal error was detected when trying to read data from the packet HSSD area.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_IFIB [chars]: [chars] failed

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_IFIB_RES_ALLOC Couldn't allocate platform-specific IFIB result structure: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_IFIB_RES_SET failed to set platform-specific IFIB result fields: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_IFIB_SET_KEY [chars]: lpts_netio_ifib_set_key() failed

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_INFO_GENERAL [chars]: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_INVALID_ARGS [chars]: invalid args

Explanation    Detected invalid arguments.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_MALLOC [chars]: malloc failure

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_NETIO_DEBUG_INIT lpts netio debugging failed to initialize

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_NETWORK_START_FAIL Unable to get packet network start. Dropping packet

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_NULL_FINT_IDB --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_NULL_TRANSPORT_CALLBACK --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PA_CLOSE [chars]: couldn't close the client connection with PA: [chars]

Explanation    An internal error was detected when trying to close the client connection with PA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PA_CONN [chars]: couldn't establish connection with PA: [chars]

Explanation    An internal error was detected when trying to connection to PA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PAK_DUP couldn't duplicate packet (deliver failed), error equals [dec]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PAK_NETIO_MUTEX_LOCK [chars]: pak_netio_mutex_lock() failed: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PAK_NETIO_MUTEX_UNLOCK [chars]: pak_netio_mutex_unlock() failed: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PAK_NETIO_RETURN_BUFFER [chars]: pak_netio_return_buffer() failed: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PAK_NETIO_UINT8_GET [chars]: pak_netio_uint8_get() failed: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PLATFORM_GET_MY_NODEID [chars]: couldn't get my node ID: [chars]

Explanation    An internal error was detected when trying to get the node ID for the node on which the caller is running.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PREPARE_EGRESS_BUFFHDR [chars]: failed to process egress buffer header of packet [hex]: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PROCESS_INGRESS_BUFFHDR [chars]: failed to process ingress buffer header of packet [hex]: [chars]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_PUNT_FAIL punt to [chars] failed, dropping packet: [chars]

Explanation    One of the possible cause for this message could be denial-of-service attack.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_SYSDB_CONN_TO_COID [chars]: converting SysDB connection ID to file descriptor failed: [chars]

Explanation    An internal error was detected when trying to convert a SysDB connection ID to a file descriptor.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-ERR_SYSDB_NS_NODE_TO_STR [chars]: converting node ID to SysDB string failed: [chars]

Explanation    An internal error was detected when trying to convert a node ID to a string format that SysDB expects.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-3-LTRACE_INIT_FAIL The ltrace init for shmem file [chars] returned error ([chars])

Explanation    An internal error is encountered during ltrace initialization. The fallout of this could be the respective show command to view traces for the transport will not yield any result.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LPTS-6-INFO_INTERNAL_TABLE LPTS tables changed in middle of walk. Show command incomplete.

Explanation    During processing of a show command, the internal LPTS data structures changed in such a way as to make completion of the show command impossible.

Recommended Action    Retry the command.

LTRACE_CONFIG Messages

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-ERR_MUTEX_INIT [chars]:[dec] mutex operation [chars] failed for node config entry mutex: [chars]

Explanation    A internal mutex operation has failed. This is a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-ERR_MUTEX_LOCK [chars]:[dec] mutex operation [chars] failed : [chars]

Explanation    A internal mutex operation has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-ERR_MUTEX_UNLOCK [chars]:[dec] mutex operation [chars] failed : [chars]

Explanation    A internal mutex operation has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-ERR_TUPLE_UNPACK Failed to unpack tuple data for [chars] Error([dec]): [chars]

Explanation    Failed to unpack tuple details

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-EXTERNAL_API_ERROR [chars] failed: [chars]

Explanation    Common external API returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-3-NODE_NAME_FAIL [chars]:Failed to get node name for node [dec]

Explanation    Failed to get the local node name from platform library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_CHAN_CON Failed to connect msg chan [chars] Error([dec]): [chars]

Explanation    LWM msg channel connect failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_EVENT_CREATE event_conn_create failed. Error([dec]): Reason: [chars]

Explanation    Event connection create failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_EVENT_NOTIFY event_conn_notify failed. Error([dec]): Reason: [chars]

Explanation    Event connection notify failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_EVENT_OPEN event_conn_open failed. Error([dec]): Reason: [chars]

Explanation    Event Conn Open failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_EXTRACT_FIELDS Failed to extract fields for node [dec]

Explanation    Failed to extract rack/slot/instance fields

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_MEM_ALLOC Malloc failed :[chars] at [dec]

Explanation    Memory running low

Recommended Action    Information only.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_NODE_VALIDATE Failed to validate node [dec]

Explanation    Failed to validate received nodeid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_OPEN_DIR qsm dir open failed. Error([dec]): [chars]

Explanation    Failed to open qsm dir after retries

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_SEND_MSG Failed to send msg [chars] Error([dec]): [chars]

Explanation    LWM msg send failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_SYSDB_BIND Sysdb bind failed. Error([dec]): [chars]

Explanation    Sysdb bind failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-ERR_SYSDB_REG_VERIFY Sysdb verifier registration failed. Error([dec]): [chars]

Explanation    Sysdb verifier registration failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-4-LTRACE_INIT_ERROR ltrace initialization failed. Error([dec]): [chars]

Explanation    ltrace initialization for ltrace config failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_CONFIG-7-ERR_MUTEX_DESTROY [chars]:[dec] mutex destroy for node [dec] failed : [chars]

Explanation    A internal mutex destroy operation has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LTRACE_SDT_SHOW Messages

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-EXTEND_FAIL Extending the trace string data to [dec] traces ran out of memory

Explanation    The show decode helper library attempted to extend its database of decode trace string data and was unable to do so. Any trace using this string may not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-GROUP_CALLOC Unable to get space for group header data

Explanation    The show decode helper library isolates string trace data into group keyed by trace name and nodeid. The library was unable to obtain memory for one of this group items. Because of this, the library will not be able to print out data from the given trace name/node grouping.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-NODE_PRINT Unable to decode nodeid because [chars]

Explanation    The show helper was unable to decode a text name for the node id a given trace block containing string data came from. As a result of this, the given trace will not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-STR_CALLOC Unable to get string data for trace [dec] of length [dec]

Explanation    The show decode helper library breaks up string data for messages into single trace buffers and reassembles them. There was not enough memory to create the string space to hold the data. Any trace using this string may not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-STR_SEQ Sequence of string data on trace [dec] was [dec] instead of the expected [dec]

Explanation    The show decode helper library breaks up string data for messages into single trace buffers and reassembles them. While putting the trace data back together, the sequence received was not the expected next sequence. Any trace using this string may not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-TRACE_FIND The message decode locate for '[chars]' failed because:[chars]

Explanation    The show decode helper library isolates string and trace data to a given trace name and node. The attempt to find this in the lookup tree failed for the above reason. Any trace using this string may not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT_SHOW-4-TRACE_INSERT The message decode insert for '[chars]' failed because:[chars]

Explanation    The show decode helper library isolates string and trace data to a given trace name and node. The attempt to insert this into the lookup tree failed for the above reason. Any trace using this string may not be printable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LTRACE_SDT Messages

Error Message     
 
    
    
   

%OS-LTRACE_SDT-4-BTREE_FIND [chars]: The message storage optimization failed in btree lookup for '[chars]':[chars]

Explanation    The internal message storage space optimizer failed to lookup the string being stored. This is not a critical, since the string will still be stored, however it does possibly indicate a lower level memory corruption or other problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SDT-4-BTREE_INSERT [chars]: The message storage optimization failed in btree insert for '[chars]':[chars]

Explanation    The internal message storage space optimizer failed to insert the string being stored. This is not a critical, since the string will still be stored, however it does possibly indicate a lower level memory corruption or other problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LTRACE_SERVER Messages

Error Message     
 
    
    
   

%OS-LTRACE_SERVER-3-CFG_THR_INIT_ERR [chars]: Failed to init ltrace config thread

Explanation    Failed to init ltrace config thread after several retries.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SERVER-3-ERR_ATTR_DETACH [chars]:[dec] pthread attr set detach failed [chars]

Explanation    Failed attr set detach for thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SERVER-3-ERR_ATTR_INIT [chars]:[dec] pthread attr init failed [chars]

Explanation    Failed to init pthread attr.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-LTRACE_SERVER-3-EXTERNAL_API_ERROR [chars] failed: [chars]

Explanation    Common external API returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SERVER-3-NODE_NAME_FAIL [chars]: Failed to get the local nodes internal node name

Explanation    Failed to get the local node name from platform library.

Recommended Action    --

LTRACE_SYNC Messages

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-3-EXTERNAL_API_ERROR [chars] failed: [chars]

Explanation    Common external API returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-3-FILE_BAD_MAGIC file [chars] has bad magic number [hex], should be [hex]

Explanation    The file has wrong magic number.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-3-MEMORY_UNMAP_ERROR memory unmapping for [chars] failed. size:[dec]. Error([dec]): [chars]

Explanation    Memory unmapping for the file failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-3-PTHREAD_API_ERROR [chars] failed. Error([dec]): [chars]

Explanation    Pthread API returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-3-RWLOCK_ERROR [chars] for [chars] failed. Error([dec]): [chars]

Explanation    Read-write lock failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-4-FILE_SIZE_CHANGE The size of file [chars] couldn't be changed to [dec]. Error([dec]): [chars]

Explanation    The operation to change the file size failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-4-LTRACE_INIT_ERROR ltrace initialization failed. Error([dec]): [chars]

Explanation    ltrace initialization for ltrace synchronization server failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-4-MEMORY_MAP_ERROR memory mapping for [chars] failed. size:[dec] protection:[hex] flags:[hex] fd:0x[dec] off:[dec] Error([dec]): [chars]

Explanation    Memory mapping for the file failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-4-SHMEM_ERROR ltrace shmem [chars] failed for [chars]. flags:[hex] mode:%o Error([dec]): [chars]

Explanation    Shared memory operation failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-6-FILE_TOO_SHORT file [chars] is too short. size:[dec] version:[dec]

Explanation    The file is read when it's being written, or version mismatch between the file and the reader.

Recommended Action    Informational only. Indicates upgraded software accessed older version file before it's updated.

Error Message     
 
    
    
   

%OS-LTRACE_SYNC-6-FILE_WRONG_VERSION file [chars] has wrong version [dec], should be [dec]

Explanation    The file has wrong version.

Recommended Action    Informational only.

LTRACE Messages

Error Message     
 
    
    
   

%OS-LTRACE-3-ERROR [chars] failed: [chars]

Explanation    Required functionality failed or returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE-3-FTRUNCATE_ERROR truncate for [chars] file to a specified length failed. Failed parameters, index:[dec] length:[dec] file descriptor:[dec]. Error([hex]): [chars]

Explanation    ftruncate system call returned an unexpected error Debug trace buffer initialization failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE-3-MMAP_ERROR [chars] Failed parameters, index:[dec] length:[dec] file descriptor:[dec]. Error([hex]):[chars]

Explanation    mmap system call returned an unexpected error Debug trace buffer initialization failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE-3-MUTEXINIT_ERROR Initializing mutual access exclusion for [chars] file failed. Error([hex]): [chars]

Explanation    pthread_mutex_init system call returned an unexpected error Debug trace buffer initialization failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE-3-OPEN_ERROR Opening trace log file [chars] failed, Error([hex]): [chars]

Explanation    open system call returned an unexpected error Debug trace buffer initialization failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-LTRACE-7-BADMAGIC magic number corrupted, filename:[chars], pid:[dec] tid:[dec]

Explanation    Internal debugging message. For subsequent analysis of magic number corruption, snapshot of running process core dump has been taken.

Recommended Action    Informational only. Indicates magic number corrupted and has been recovered.

Error Message     
 
    
    
   

%OS-LTRACE-7-DEBUG [chars] [chars] [chars]

Explanation    Internal debugging message.

Recommended Action    Informational only.

Error Message     
 
    
    
   

%OS-LTRACE-7-STRING_SCALE scaling down string buffer [chars] (len:[dec]) by [dec]

Explanation    Internal debugging message.

Recommended Action    Informational only. Indicates card has less system memory

Error Message     
 
    
    
   

%OS-LTRACE-7-WRAP_SCALE scaling down wrap buffer [chars] (len:[dec]) by [dec]

Explanation    Internal debugging message.

Recommended Action    Informational only. Indicates card has less system memory

LWMESS Messages

Error Message     
 
    
    
   

%OS-LWMESS-7-CORRUPT_CLI [chars]: Corrupted channel list for [chars]. Memory lost, chan equals [pointer], infop equals [pointer], connectp equals [pointer] magic equals [hex] guard equals [hex]

Explanation    A corrupt memory area was discovered in an internal data structure

Recommended Action    This is an internal error and should be reported to TAC. Take a memory dump and try re-starting the offending application.

Error Message     
 
    
    
   

%OS-LWMESS-7-CORRUPT_CLI_SKIP [chars]: Corrupted channel list for [chars]. Iteration Skipped, chan equals [pointer], infop equals [pointer], connectp equals [pointer] magic equals [hex] guard equals [hex]

Explanation    A corrupt memory area was discovered in an internal data structure. A function that was searching the open connection list was not able to process all open connections.

Recommended Action    This is an internal error and should be reported to TAC. Take a memory dump and try re-starting the offending application.

Error Message     
 
    
    
   

%OS-LWMESS-7-INVALID_MSG_ERROR_CODE Invalid msg_error errcode: [dec]

Explanation    The msg_error error codes are limited to errno values. Any error values with high bits set (such as -1) are invalid.

Recommended Action    Report this message to TAC.

Error Message     
 
    
    
   

%OS-LWMESS-7-LOCK_CONN [chars]: Could not lock conn_list for [chars]: [chars]

Explanation    The mutex for the channel connection list could not be held

Recommended Action    This is an internal error and should be reported to TAC. Try re-starting the offending application. If that does not work, a memory dump should be taken (to assist TAC) and the router should be rebooted.

Error Message     
 
    
    
   

%OS-LWMESS-7-UNLOCK_CONN [chars]: Could not unlock conn_list for [chars]: [chars]

Explanation    The mutex for the channel connection list could not be released

Recommended Action    This is an internal error and should be reported to TAC. Try re-starting the offending application. If that does not work, a memory dump should be taken (to assist TAC) and the router should be rebooted.

MEMLOG Messages

Error Message     
 
    
    
   

%OS-MEMLOG-3-ERRCHECK Invalid error check value: [hex]

Explanation    An unexpected value was found in the error check.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-FREE --

Explanation    --

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-HEADER Invalid [chars] value in header: [hex]

Explanation    An unexpected value was found in the header. This might indicate a buffer overflow

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-MALLOC Memory allocation failed

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-MEMALIGN Attempt to use unsupported function: memalign()

Explanation    This function is not supported.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-SIGERR Received unknown signal value [unsigned int]

Explanation    An unexpected signal value was received.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MEMLOG-3-TOOBIG Attempt to allocate more than 16MB using [chars]()

Explanation    A process attempted to malloc more than the maximum size of 16MB

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MEMPOOL_EDM Messages

Error Message     
 
    
    
   

%OS-MEMPOOL_EDM-1-EVENT_BLOCK_ERROR event_block error -- [chars]

Explanation    Error during event block

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-MEMPOOL_EDM-1-SYSDB_REGISTRATION_FAILURE Sysdb registration for [chars] failed. Error: [chars]

Explanation    Sysdb registration failure

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-MEMPOOL_EDM-3-EVENT_MGR_CREATE_FAILED Can't create event manager. [chars]

Explanation    Failed to create event manager for the process

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-MEMPOOL_EDM-3-MALLOC_FAILED Malloc failed

Explanation    Memory running low

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-MEMPOOL_EDM-3-SYSDB_BIND_FAILURE Unable to bind to [chars]. Error: [chars]

Explanation    Could not connect to sysdb

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

MGII_API Messages

Error Message     
 
    
    
   

%OS-MGII_API-3-INFRA_FAIL [chars] failed: [chars]

Explanation    An error occurred while processing an infrastructure service request. This should happen mostly due to resource exhaustion.

Recommended Action    Do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_VPN_MIB Messages

Error Message     
 
    
    
   

%OS-MPLS_VPN_MIB-3-ERR_DLL_LOAD Cannot load DLL: [chars]

Explanation    Cannot load DLL error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MPLS_VPN_MIB-3-ERR_DLL_SYMBOL_ERROR Cannot find symbol [chars] in DLL [chars]

Explanation    Cannot find DLL symbol error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-MPLS_VPN_MIB-3-ERR_INIT [chars] : [chars]

Explanation    Initialization failed

Recommended Action    Enable 'debug mpls vpn init' and restart the process mpls_vpn_mib.

Error Message     
 
    
    
   

%OS-MPLS_VPN_MIB-3-ERR_TRACE_INIT mpls vpn mib event tracing subsystem initialization failed

Explanation    mpls vpn mib could not initialize the tracing module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

NCD Messages

Error Message     
 
    
    
   

%OS-NCD-3-INIT_ERR [chars]%s

Explanation    An software error occurred during the initialization of the NCD process.

Recommended Action    NCD will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-NCD-3-PAK_CSUM_ERR Checksum failed on received packet; Pak:0x[pointer] Length:[dec] Offset:[dec] Computed Checksum:[unsigned int]

Explanation    A checksum error was detected for a packet by NCD.

Recommended Action    The clients of NCD will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

NQC Messages

Error Message     
 
    
    
   

%OS-NQC-3-PAK_CSUM_ERR Checksum failed on received packet; Pak:0x[pointer] Length:[dec] Offset:[dec] Computed Checksum:[unsigned int]

Explanation    A checksum error was detected for a packet by NCD.

Recommended Action    The clients of NCD will attempt to recover from this situation by retransmitting the packets. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

NRS_LIB Messages

Error Message     
 
    
    
   

%OS-NRS_LIB-7-ERROR [chars]: info [hex]([chars]) error: [hex]([chars])

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-NRS_LIB-7-REG_ERROR [chars]-E-[chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

nrs Messages

Error Message     
 
    
    
   

%OS-nrs-2-USAGE Incorrect arguments: Usage: [chars] [svr_threads]

Explanation    Incorrect command line parameters were passed to the nrs server, and so it failed to start.

Recommended Action    Check the startup arguments passed to nrs server. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_ATTR_CREATE checkpoint create failed for attr [dec], handle [hex], err [hex]

Explanation    chkpt_create api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_ATTR_SAVE checkpoint save failed for attr [hex], handle [hex], err [hex]

Explanation    chkpt_save api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_CREATE checkpoint create failed for [chars], handle [hex], name [chars], err [hex]

Explanation    chkpt_create api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_DEBUG saved class [chars], handle [hex] to checkpoint table

Explanation    chkpt_iterate_* api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_DELETE_BYKEY checkpoint delete failed for table [chars], handle [hex], err [hex]

Explanation    chkpt_delete_bykey api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_ITERATE chkpt_iterate_[chars] failed for table [hex], err [hex]

Explanation    chkpt_iterate_* api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_ITERATE_NEXT chkpt_iterate_next failed for table [hex], after [dec] iterations, err [hex]

Explanation    chkpt_iterate_* api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_REGISTER checkpoint register failed for table [dec], err [hex], [chars]

Explanation    chkpt_register api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_ATTR Failed to restore attr, attr [hex], handle [hex] from checkpoint table, err [hex], [chars]

Explanation    nrs_chm_chkpt_create_attr api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_CLASS Failed to restore class [chars], handle [hex] from checkpoint table, err [hex], [chars]

Explanation    nrs_chm_chkpt_create_class api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_DATA Failed to restore data [chars], handle [hex] from checkpoint table, err [hex], [chars]

Explanation    nrs_chm_chkpt_create_data api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_DEBUG restoring from chkpt class [chars], handle [hex], index [hex] to checkpoint table

Explanation    chkpt_iterate_* api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_DEBUG_SUCCESS restored from chkpt class [chars], handle [hex], index [hex] to checkpoint table

Explanation    chkpt_iterate_* api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_RESTORE_SET Failed to restore set, exp [chars], handle [hex] from checkpoint table, err [hex], [chars]

Explanation    nrs_chm_chkpt_create_set api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_SAVE checkpoint save failed for [chars], handle [hex], name [chars], err [hex]

Explanation    chkpt_save api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-CHKPT_UNREGISTER checkpoint unregister failed for table [chars], class [chars], err [hex]

Explanation    chkpt_unregister api failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-ENS_PUBLISH ens_publish call failed [chars] handle([hex]) len([unsigned int])

Explanation    ens_publish call has failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-ENS_WRITE ens_write call failed [chars] handle([hex]) len([unsigned int])

Explanation    ens_write call has failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-INIT NRS Server restarting due to error [hex] in initialization

Explanation    An NRS Server hit an error from which it could not recover during initialisation and is restarting to continue normal operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-INTERNAL [chars]: rc [hex], [chars]

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-LOCKING Failed to [chars] [chars]. Error [dec]

Explanation    The server has either failed to acquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The server has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-NULLARG --

Explanation    --

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-REGCOMP regcomp failed - error [hex], regex [chars]

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-REGISTER_EXTERNAL_PUBLISH_DIFF_ID trying to create or get data [chars] handle [hex] of class [chars] with previous id [hex] and new id [hex]

Explanation    try to register a data with different id

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-REPLY Failed to send reply to client pid [unsigned int] tid [unsigned int]: rc [hex]

Explanation    The server failed to reply to a client request.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-3-SHUTDOWN NRS Server restarting due to error during operation. Error [hex], [chars]

Explanation    An NRS Server hit an error from which it could not recover and is restarting to continue normal operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-7-EDM_INTERNAL [chars]: rc [hex], [chars]

Explanation    The server's EDM has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-nrs-7-LTRACE_INIT Ltrace init for file [chars] failed [chars]

Explanation    --

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

NRSUTILS Messages

Error Message     
 
    
    
   

%OS-NRSUTILS-3-INTERNAL [chars]: rc [hex]

Explanation    The client library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-NRSUTILS-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The nrs common library has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-NRSUTILS-3-NULLARG --

Explanation    --

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OBFLINFRA_CLI Messages

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-3-NO_MEMORY Failed in allocating memory with size:[dec]

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-FAIL_TO_GET_SDD Fail to get sdd information, file size: [dec]

Explanation    Fail to get sdd information

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-FILE_GARBAGE Garbage [dec] bytes at the end

Explanation    File has garbage bytes at the end.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-invalid_historical_file_format Invalid historical file format. [chars]. field id: [dec]. Abort printing file contents.

Explanation    Invalid historical file format.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-INVALID_RECORD_TYPE Invalid record type, type: [dec]

Explanation    Invalid record type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-JID_GET_ERROR process's JobID can not be obtained

Explanation    process's JobID can not be obtained

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-STRING_LENGTH_TOO_LONG The string([chars]) is longer than buffer length([dec]).

Explanation    The string length is too long.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-SYMBOL_NOT_FOUND process(JobID:[dec]) notified symbol:[chars] but it is not found in dll:[chars]. Error:[chars]

Explanation    A symbol notified from a process is not found

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLI-7-UNABLE_TO_GET_NODENAME Unable to get the nodename of this card, file name: [chars]

Explanation    Unable to get the nodename of this card

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OBFLINFRA_CLIENT Messages

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-APPLICATION_ERROR Failed to execute application function([chars]: [chars]), client_id:[dec], descriptor:[dec], error([dec]): [chars]

Explanation    Failed to execute some application functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-APPLICATION_REGIST_ERROR Failed to execute application registration function([chars]), nodeid:[hex], error([dec]): [chars]

Explanation    Failed to execute application registration function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-ID_INVALID Invalid client_id [dec] is returned for feature:[chars] target_node:[hex].

Explanation    Invalid client_id is created.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-JID_GET_ERROR process's JobID can not be obtained

Explanation    process's JobID can not be obtained

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-NO_MEMORY Failed in allocating memory with size:[dec]

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-NODEID_FAILURE Failed to get nodeid for [chars]. Error([dec]): [chars]

Explanation    Failed to get nodeid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-NUM_OF_SENSORS_OVERFLOW Cannot set more sensor ID than number of sensors([dec]).

Explanation    Cannot set more sensor ID than number of sensors.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-SENSOR_NOT_FOUND Sensor([dec]) is not found

Explanation    No sensor found

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_CLIENT-7-TOO_LONG_FEATURE_NAME feature [chars] is too long name

Explanation    Too long feature name is specified

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OBFLINFRA_DRIVER Messages

Error Message     
 
    
    
   

%OS-OBFLINFRA_DRIVER-3-JID_GET_ERROR process's JobID can not be obtained

Explanation    process's JobID can not be obtained

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_DRIVER-7-NODEID_FAILURE [chars] of nodeid for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a nodeid operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_DRIVER-7-TOO_LONG_DEVICE_NAME device [chars] is too long name

Explanation    Too long device name is specified

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OBFLINFRA_INT Messages

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-EVM_ERROR [chars], Error([dec]): [chars]

Explanation    Failed in some event management functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-INVALID_RECORD_MAGIC_NUM Invalid record magic number: [hex]. [hex] is expected. Abort reading the file contents.

Explanation    Invalid magic number

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-MSG_ERROR Received a bad message. error_val:[dec] error_info:[chars]

Explanation    The message received by the server had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-NO_MEMORY Failed to allocate memory with size:[dec] at [chars]:[dec]

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-NO_PLATFORM_DATA_FILE platform data file:[chars] doesn't exist

Explanation    The platform data file doesn't exist.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-NO_SERVER_FOUND no destination OBFL manager found

Explanation    Destination OBFL manager path is not found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-NODEID_FAILURE [chars] of nodeid for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a nodeid operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-NODEID_GET_FAILURE nodeid for [chars] can not be obtained

Explanation    Self nodeid can not be obtained.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-PLATFORM_DATA_FILE_ERROR platform data file:[chars] scan failed. Error([dec]): [chars]

Explanation    An error happened while reading the platform data file.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-PTHREAD_ERROR [chars] failed. Error([dec]): [chars] : [chars]:[dec]

Explanation    Failed in a pthread function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-RECORD_TOO_SHORT Too short record size:[dec] for [chars] record. The file contents might be corrupted.

Explanation    A feature record is too short.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-RECORD_TYPE_MISMATCH Type mismatch for [chars] record. Record_type:[dec] My_type:[dec].

Explanation    A feature record has different type with current software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-RECORD_VERSION_MISMATCH Version mismatch for [chars] record. Record_version:[dec] My_version:[dec].

Explanation    A feature record has different version format with current software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-SYSCALL [chars]: [chars]() failed: [chars]

Explanation    The client library has failed a system call.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-3-TIMER_ERROR Timer Error. [chars]. Error([dec]): [chars] at [chars]:[dec]

Explanation    Something went wrong with the timer

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-4-JID_GET_ERROR process's JobID can not be obtained

Explanation    process's JobID can not be obtained

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-4-MSG_RESEND_ERROR [chars] [chars]. Error([dec]): [chars]

Explanation    Failed in re-sending a message after onboard logging server process restart.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-4-UNSUPPORTED_API Unsupported API [chars] called by process [chars]

Explanation    The call is not supported by OBFL infra.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-5-MSG_CKSUM_DATA_ERROR Received a corrupted message data with cksum:[hex] Calculated cksum:[hex] length:[dec] type:[dec]

Explanation    The message received by an application had a wrong cksum value. The message data could be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-5-MSG_CKSUM_HDR_ERROR Received a corrupted message header with cksum:[hex] Calculated cksum:[hex] length(corrupted?):[dec] type(corrupted?):[dec]

Explanation    The message received by an application had a wrong cksum value. The message data could be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-5-MSG_REPLY_ERROR Received message has wrong reply data:0x[pointer] data_len:[dec] actual_data_len:[dec]

Explanation    The message received by an application had a wrong reply data. The message data could be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-6-EXIT process terminated with code:[dec] at [chars]:[dec]

Explanation    An OBFL process exit.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-BUFFER_GARBAGE Garbage [dec] bytes at the end of a buffer for [chars]

Explanation    A buffer has garbage bytes at the end.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-DEBUG_CONNECT [chars]:[dec] server:[chars]

Explanation    debug print before msg_chan_connect

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-DEBUG_QSM [chars]:[dec] server:[chars]

Explanation    debug print before qsm_stat

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-DEBUG_SENDV [chars]:[dec] conn:[pointer] target_node:[pointer]

Explanation    debug print before msg_sendv

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-FILE_ERROR [chars] [chars]. Error([dec]): [chars]

Explanation    An error happened in a file operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-RECORD_TOO_LONG Too long record size:[dec] for [chars] record. The file contents might be corrupted.

Explanation    A feature record is too long.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-SLOT_DECODE_FAILURE decoding of rack:[hex] and slot:[hex] for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a nodeid decoding.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLINFRA_INT-7-TOO_LONG_NAME [chars] [chars] is too long name

Explanation    Too long name is specified

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OBFLMGR Messages

Error Message     
 
    
    
   

%OS-OBFLMGR-3-CHECKSUM_ERROR checksum for [chars] is wrong. Original:[hex] Calculated:[hex] offset:[dec]. The contents of [chars] could be corrupted.

Explanation    A checksum of a record is wrong. The file could be corrupted. The file should be saved to other place for later debugging, and then it should be removed to recover current situation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-ENV_STATIC_DATA_ERROR Failed to [chars] env static data record. Error([dec]): [chars]

Explanation    An environment record data processing error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-EVENT_CONN_CREATION_ERROR Failed to create event connection. Error: [chars]

Explanation    Failed to create event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-EVENT_CONN_NOTIFY_ERROR Failed to attach a handler for an event connection. Error: [chars]

Explanation    Failed to attach a handler for an event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-EVENT_CONN_OPEN_ERROR Failed to open an event connection. Error: [chars]

Explanation    Failed to open an event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-EVENT_TIMER_ERROR [chars] [chars]. Error: [chars]

Explanation    Failed to initialize a timer for an event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-EVM_ERROR [chars], Error([dec]): [chars]

Explanation    Failed in some event management functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-FILE_SIZE_GET_FAILURE file size for [chars] can not be obtained from platform DB

Explanation    An OBFL file size can not be obtained from platform DB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-FILELIMIT_TOO_SMALL A file's max limit is too small for [chars], or internal parameters might be corrupted. cur_data_size:[dec] file_size_limit:[dec].

Explanation    A file's max limit is too small, or internal parameter might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-HISTGROUP_TOO_LARGE Too large historical group for [chars], or internal parameters might be corrupted. cur_data_size:[dec] writing_group_size:[dec] file_size_limit:[dec].

Explanation    A historical group is too large, or internal parameter might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-LWM_ERROR [chars], Error([dec]): [chars]

Explanation    Failed to execute some LWM library functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-MSG_VER_MISMATCH Msg:[chars] version:[dec] mismatch from jid:[dec]. Correct version:[dec].

Explanation    A msg from an application has different version format with current software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-MUTEX_RESET_ERROR Mutex reset error. Exit and restart the process

Explanation    Failed to reset a corrupted mutex. Restart the process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-NO_FINAL_CLEAR_RECORD A file [chars] doesn't have its final clear record after compressed records, or internal parameters might be corrupted. cur_data_size:[dec] file_size_limit:[dec].

Explanation    A file don't have its final clear record which is necessary for coalescing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-RECORD_LENGTH_UNMATCH A record length:[dec] and the LWM msg_length:[dec] doesn't match for [chars] feature

Explanation    The message received by an application had inconsistent record length.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-RECORD_TOO_SHORT Too short record size:[dec] for [chars] record at offset:[dec]. The file contents might be corrupted.

Explanation    A feature record is too short.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-RECORD_VERSION_MISMATCH Version mismatch for [chars] record at offset:[dec]. Record_version:[dec] My_version:[dec].

Explanation    A feature record has different version format with current software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-REDUNDANCY_INIT_ERROR [chars], Error([dec]): [chars]

Explanation    Failed to init redundancy state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SM_CALLBACK_ERROR [chars] [chars] failed. Error([dec]): [chars]

Explanation    Failure in self management callback routine.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYMBOL_NOT_FOUND process(JobID:[dec]) notified symbol:[chars] for owner:[chars], but it is not found. Error:[chars]

Explanation    A dll notified from a client is not found

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYSDB_BIND_ERROR Sysdb bind failed for [chars] [chars]. Error([dec]): [chars]

Explanation    Sysdb bind error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYSDB_EDM_INIT_ERROR Failed edm initialization. Error: [chars]

Explanation    Failed edm initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYSDB_REG_EDM_ERROR sysdb registration edm error. Error: [chars]

Explanation    Registration fail for sysdb edm.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYSDB_REG_NOTIFY_ERROR sysdb registration (notification) error, [chars] [chars], [chars]

Explanation    Registration fail for sysdb notification

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-SYSDB_REG_VERIFY_ERROR sysdb registration (verification) error, [chars] [chars], [chars]

Explanation    Registration fail for sysdb verification

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-3-UNLOAD_DLL_FAILED previous DLL:[chars] notified from process(JobID:[dec]) for FEATURE:[chars] can not be unloaded. Error:[chars]

Explanation    An old DLL can not be unloaded

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-CLI_MSG_ERROR Received a bad message with value:[dec]: [chars]

Explanation    The message received by the server had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-CLIENTID_ERROR client_id:[dec] specified from process(JobID:[dec]) caused an error:[chars]

Explanation    Specified client ID caused an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-DEVCTL_ERROR Failed to get ReloadReason. Return:[dec], result:[dec].

Explanation    devctl error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-DEVICE_CREATED_AND_DISABLED device:[chars] on node:[chars] is disabled by user configuration

Explanation    A device is disabled for logging onboard by user configuration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-DEVICE_DEACTIVATED device:[chars](nodeid:[hex]) is deactivated for onboard logging due to [dec] times write error to file:[chars]. The last Error([dec]): [chars]

Explanation    The device on the node is deactivated for onboard logging.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-DEVICE_DISABLED device:[chars] on node:[chars] is disabled by user configuration

Explanation    A device is disabled for logging onboard by user configuration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-FEATURE_DEACTIVATED feature:[chars] on device:[chars](nodeid:[hex]) failed to get platform information from [chars], and is deactivated

Explanation    A feature is deactivated because it couldn't get platform information from a new platform library.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-FILE_ERROR file:[chars](fp:[pointer], fd:[dec]) [chars] failing. [dec] retry so far. Error([dec]): [chars]

Explanation    Failed to open/close an OBFL file.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-FILE_OPEN_ERROR [chars] can not be opened. Error([dec]): [chars]

Explanation    File open failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-FILE_WRITE_ERROR Tried to write [dec] bytes to file: [chars](total size [dec]). Error([dec]): [chars]

Explanation    File write failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-QSM_ADD_SERVICE_ERROR QSM publish obfl config master path failed for [chars] [chars] with class[hex]. Error([dec]): [chars]

Explanation    QSM publish obfl config master path failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-QUEUE_CLEAR_ERROR queue clear error. elems:[dec] first:[pointer] last:[pointer]

Explanation    failed to clear internal queue.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-SYSMGR_API_FAILURE sysmgr API [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a sysmgr API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-UNSUPPORTED_FEATURE Unsupported FEATURE: [chars] called by a process(JobID:[dec])

Explanation    The feature is not supported by OBFL.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-4-UPTIME_RR_NOT_SET ResetReason is not set.

Explanation    ResetReason is not yet set.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-5-CORRUPTED_MSG Received a corrupted message for [chars] with value:[dec]: [chars]

Explanation    The message received by an application had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-5-MSG_CKSUM_ERROR Received a corrupted message with cksum:[hex] Calculated cksum:[hex] length(corrupted?):[dec] type(corrupted?):[dec]

Explanation    The message received by an application had a wrong cksum value. The message data could be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-6-DEVICE_ACTIVATED device:[chars](nodeid:[hex]) is activated for onboard logging.

Explanation    The device on the node is activated for onboard logging.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-6-DEVICE_ENABLED device:[chars] on node:[chars] is enabled by user configuration

Explanation    A device is enabled for logging onboard by user configuration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-OBFLMGR-6-FEATURE_ACTIVATED feature:[chars] on device:[chars](nodeid:[hex]) is activated

Explanation    A deactivated feature is activated.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-COALESCE_ERROR Coalescing failed for feature:[chars] device:[chars](node:[hex]) because [chars].

Explanation    Coalescing failed on a device. Records for the device will be discarded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-COALESCER_NOT_FOUND process(JobID:[dec]) notified coalescer:[chars] for FEATURE:[chars], but it is not found

Explanation    A coalesce function name notified from a client is not found

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-DEVICE_INACTIVE device on the node(ID:[hex]) is not active

Explanation    The device on the node is not active.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-DEVICE_NOT_READY no device ready for feature:[chars] from process(JobID:[dec]). target_node:[hex] client_id:[dec] device:[pointer].

Explanation    no device ready yet for notified feature

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-DEVICE_NOT_REGISTERED device:[chars] notified from process(JobID:[dec]) is not registered

Explanation    Caller's device is not yet registered

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-DEVICE_UNAVAILABLE device [chars] on nodeid:[hex] is not accessible on the file system. Error([dec]): [chars]

Explanation    A device specified from a driver is not accessible.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-ENV_STATE_UNKNOWN Unknown environment state:[dec] of node:[hex]

Explanation    An environment record has an unknown state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-ERRMSG_HIST_FULL Syslog historical file buffer reached the limit. Current size:[dec]. limit:[dec]. Subsequent syslog historical records will be discarded.

Explanation    Syslog historical file reached the limit.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-JID_GET_ERROR process's JobID can not be obtained

Explanation    process's JobID can not be obtained

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-MAGIC_NUM_INVALID Invalid magic number:[hex] for [chars] record. [hex] is expected. The file contents might be corrupted.

Explanation    A feature record has an invalid magic number.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-META_OPER_WRITE_ERROR Failed to write [chars] meta oper record to the file:[chars]. Error([dec]): [chars]

Explanation    An OBFL internal record type write failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-MSG_ERROR Received a bad message with value:[dec]: [chars]

Explanation    The message received by an application had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-NO_MEMORY Failed to allocate memory with size:[dec] at [chars]:[dec]

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-NODEID_DECODE_FAILURE decoding of nodeid:[hex] for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a nodeid decoding.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-NODEID_FAILURE [chars] of nodeid for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a nodeid operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-QUEUE_LIMIT_OVER The queue:[pointer] for device:[chars] entry_num:[dec] and the max limit:[dec]. The new request for [chars] will be discarded.

Explanation    The destination queue is full. New enqueue request will be discarded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-RACK_DECODE_FAILURE decoding of rack:[hex] for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a rackid decoding.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-RECORD_TOO_LONG Too long record size:[dec] for [chars] record. The file contents might be corrupted.

Explanation    A feature record is too long.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-RECORD_TYPE_UNKNOWN Unknown record type:[dec] for [chars] record. The file contents might be corrupted.

Explanation    A feature record has an unknown record type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-REDUNDANCY_STANDBY logging to node:[hex] is denied because this node:[hex] is redundancy standby state.

Explanation    Node is redundancy standby state, so can't log to other node.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-SLOT_DECODE_FAILURE decoding of rack_type:[hex] and slot:[hex] for [chars] failed. Error([dec]): [chars]

Explanation    An error happened for a slot fields decoding.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-SYSDB_TUPLE_ERROR [chars] sysdb tuple, [chars] at [chars]:[dec]

Explanation    Invalid sysdb tuple

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-UNREGISTERED_FEATURE Unregistered FEATURE:[chars] called by a process(JobID:[dec])

Explanation    The specified feature is not yet registered for OBFL manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-UPTIME_CONT_TOO_LARGE Too large continuous record, or internal parameters might be corrupted. length:[dec].

Explanation    A continuous record too large, or internal parameter might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-UPTIME_HIST_INVALID_TASKID Invalid block_and_task_id:[hex]. The file contents might be corrupted.

Explanation    This record has invalid block_and_task_id.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-UPTIME_HIST_TOO_LARGE Too large historic uptime record([chars]), or internal parameters might be corrupted. length:[dec] offset_ehud:[dec].

Explanation    A historic uptime record too large, or internal parameter might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-OBFLMGR-7-UPTIME_RECORD_NOT_FOUND Uptime record([chars]) is not found.

Explanation    Uptime record is not found

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PA Messages

Error Message     
 
    
    
   

%OS-PA-2-CTX_CREATE [chars]: Can't create VRF context structures. VRF '[chars]' ([hex]) error [chars] ([unsigned int])

Explanation    PA Can't create VFR context structures.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-2-IFIB_LIMIT IFIB entries threshold exceeded in LPTS - [chars]

Explanation    The number of IFIB entries in lpts has exceeded the threshold limit.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-2-INFRA_FAIL [chars]: [chars] failed rc equals [dec]

Explanation    There was a ENA infra call failure resulting in a failure to provide some infrastructure service.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%OS-PA-2-RSI_ERROR RSI [chars] failed error [chars] ([unsigned int])

Explanation    RSI error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-2-RSI_UNKNOWN_EVENT Unknown event from RSI event [unsigned int]

Explanation    RSI sent unknown event

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ECM_SETRETRY_FAIL Error setting linear connection retry mechanism : [chars]

Explanation    Failed to set linear connection retry mechanism in Port Arbitrator Client

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_ADD_SLICE [chars]: Assign of slice [chars] to node [hex] failed. ([chars])

Explanation    The PA failed to assign an IFIB slice.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_BACKEND [chars]: [chars] failed

Explanation    Sysdb backend api call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_BAG [chars]: [chars] failed: [chars]

Explanation    Bag api call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_FM_MSG_TIMEOUT [chars]: [chars] update of slice [chars] to node [hex] timed out.

Explanation    The PA failed to receive a response to an IFIB table update or an IFIB slice assignment update message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_LOCK [chars] line [dec]: error: [chars]

Explanation    An attempt to lock a mutex failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_PIFIB_MSG_TIMEOUT [chars]: Pre-IFIB update for slice [chars] timed out.

Explanation    The PA failed to receive a response to a critical Pre-IFIB update.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_SYSDB [chars]: [chars] failed
[chars]

Explanation    Sysdb api call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-ERR_UNLOCK [chars] line [dec]: error: [chars]

Explanation    An attempt to lock a mutex failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-3-EVENT_REGISTRATION_FAILED PA failed to connect to the event manager: [chars]

Explanation    The PA process failed while attempting to connect to an event manager channel for the indicated subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PA-6-INFO_GENERAL [chars]: [chars]

Explanation    The PA encountered some problem in generic nature or plain information.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

PCDS Messages

Error Message     
 
    
    
   

%OS-PCDS-3-ERROR [chars] failed: [chars]

Explanation    Required functionality failed or returned an error

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-PCDS-7-DEBUG [chars] [chars] [chars]

Explanation    Internal debugging message.

Recommended Action    Informational only.

PLACED_LIB Messages

Error Message     
 
    
    
   

%OS-PLACED_LIB-7-STARTUP_POLICY System placement policy found in [chars]. Policy should be moved to a .placement file.

Explanation    PlaceD discovered system placement policy specified in an unsupported format; the policy will not be honored. The system should continue to function correctly, though process placement decisions may be sub-optimal.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED_LIB-7-VECTOR_OVERFLOW Overflow in message vector ([dec] entries used, [dec] available)

Explanation    A client was unable to send a message to PlaceD due to encountering an internal error condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLACED Messages

Error Message     
 
    
    
   

%OS-PLACED-2-MIGRATE_DONE Migration completed. Time taken to migrate:[dec] seconds

Explanation    Migration completed in x seconds.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ADR_CONSUME Unable to consume requests from ADR:[chars]

Explanation    Unable to consume requests from ADR.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ADR_INIT Unable to initialize atomic descriptor ring:[chars]

Explanation    Unable to initialize atomic descriptor ring.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ADR_PRODUCE Unable to produce:[chars]

Explanation    Unable to produce requests in ADR.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-BAD_MESSAGE [chars]:[dec]

Explanation    PlaceD received an unexpected message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-CARD_TYPE Failed to obtain card type: [chars]

Explanation    PlaceD daemon was unable to obtain the card type.

Recommended Action    Automatically restarts.

Error Message     
 
    
    
   

%OS-PLACED-3-CDM_OPEN Unable to open a CDM table:[chars]

Explanation    Unable to open a CDM table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-COND_WAIT Error on signaling COND variable:[chars]

Explanation    Error signaling cond variable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-CONDATTR_INIT Unable to initialize COND attribute:[chars]

Explanation    Unable to initialize cond attribute.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-CONDVAR_INIT Unable to initialize COND variable:[chars]

Explanation    Unable to initialize cond variable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-CONDVAR_SIGNAL Unable to signal COND variable:[chars]

Explanation    Unable to signal cond variable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-CONVERT_GSPNODEID Error converting nid [dec] to gsp nodeid:[chars]

Explanation    Unable to convert nodeid to gsp nodeid.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-DBG_ON Unable to turn on debug flag - '[chars]':[chars]

Explanation    An error occurred whilst PlaceD tried to turn on debugs.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-DBG_REG Unable to register with debug infra:[chars]

Explanation    An error occurred whilst PlaceD tried to register with debug infra.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ECM_CREATE Failed to create an ECM: [chars]

Explanation    PlaceD daemon was unable to create an ecm.

Recommended Action    Automatically restarts & attempts to create ecm.

Error Message     
 
    
    
   

%OS-PLACED-3-ECM_NOTIFY Failed to set up ecm notify: [chars]

Explanation    PlaceD daemon was unable to set up ecm notify.

Recommended Action    Proceeds with just console noise.

Error Message     
 
    
    
   

%OS-PLACED-3-ECM_OPEN Failed to open ecm: [chars]

Explanation    PlaceD daemon was unable to open ecm.

Recommended Action    Proceeds with just console noise.

Error Message     
 
    
    
   

%OS-PLACED-3-ECM_SETRETRY Failed to set retry for ecm: [chars]

Explanation    PlaceD daemon was unable to set retry for ecm.

Recommended Action    Automatically restarts & attempts to recreate ecm.

Error Message     
 
    
    
   

%OS-PLACED-3-EVENT_CREATE Failed to create an event manager for channel '[chars]': [chars]

Explanation    PlaceD daemon was unable to create an event manager for receiving messages, and therefore failed to initialize.

Recommended Action    Automatically restarts & attempts to create event channel.

Error Message     
 
    
    
   

%OS-PLACED-3-EVENT_HANDLER Failed to attach event handler to event manager: [chars]

Explanation    PlaceD daemon was unable register an event handling for processing received messages, and therefore failed to initialize.

Recommended Action    Automatically restarts & attempts to attach event handler.

Error Message     
 
    
    
   

%OS-PLACED-3-EVM_NULL --

Explanation    --

Recommended Action    Automatically restarts & recovers.

Error Message     
 
    
    
   

%OS-PLACED-3-FAILED_EOI Process [chars] (jid [dec]) exited before sending EOI

Explanation    Process failed to send EOI and exited.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-FIRST_SNAPSHOT Error creating first snapshot:[chars]

Explanation    Unable to create first snapshot of node inventory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-GROUP_COUNT Error getting group count:[chars]

Explanation    Unable to get group count for PLACEMENT_GSP_GROUP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-GROUP_CREATE Error creating [chars] group:[chars]

Explanation    Unable to create PLACEMENT_GSP_GROUP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-GROUP_NOTIFY Error setting up group notify:[chars]

Explanation    Unable to set group notify for PLACEMENT_GSP_GROUP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-GROUP_SEND Error broadcasting msg [chars] to group:[chars]

Explanation    Unable to broadcast msg to members of PLACEMENT_GSP_GROUP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-INCORRECT_COMPONENT Received message for incorrect component :[dec] [dec]

Explanation    Received unexpected message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-JID_MISSING Jid [dec] missing from [chars] table

Explanation    JID missing from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-JID_UPDATE Proc table empty - Unexpected state

Explanation    Proc table empty.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-KEYS_INIT Unable to initialize key for [chars] table:[chars]

Explanation    Unable to initialize keys for table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-LOCK_MUTEX Failed to lock mutex: [chars]

Explanation    PlaceD daemon was unable to lock mutex.

Recommended Action    Automatically restarts.

Error Message     
 
    
    
   

%OS-PLACED-3-LR_PLANE_TIMER_FIRED LR PLANE timer fired. Premature LR declared. Placement-suboptimal

Explanation    LR Plane timer fired. Premature declaration of LR.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-MALLOC_FAIL [chars]:Failed to malloc: [chars]

Explanation    Unable to malloc.

Recommended Action    Automatically restarts & attempts to reallocate memory.

Error Message     
 
    
    
   

%OS-PLACED-3-MEMBER_SEND Error sending msg [chars] to member [dec]:[chars]

Explanation    Unable to send message to member.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-MUTEX_INIT Failed to initialize mutex: [chars]

Explanation    PlaceD daemon was unable to initialize the internal state mutex.

Recommended Action    Automatically restarts & attempts to do a pthread_mutex_init.

Error Message     
 
    
    
   

%OS-PLACED-3-MY_NODE Unable to get my node info:[chars]

Explanation    An error occurred whilst PlaceD tried to retrieve its node information.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-NODE_MISSING Node [dec] missing from [chars] table

Explanation    Node missing from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-NODE_NAME Error querying name for node [dec] from platform:[chars]

Explanation    Unable to query name for node from platform.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-NODE_ROLE Failed to obtain node role: [chars]

Explanation    PlaceD daemon was unable to obtain the node role

Recommended Action    Automatically restarts & attempts to attach event handler.

Error Message     
 
    
    
   

%OS-PLACED-3-NOTIF_REGN Unable to reg. event_item [chars] with sysdb:[chars]

Explanation    Unable to register for event_item with sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-PARENT_CREATE Error creating node parent timer:[chars]

Explanation    Unable to create parent for node timer tree

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-PARTNER_NODE Error querying partner node from platform:[chars]

Explanation    Unable to query partner node from platform.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-PROCESS_EXHAUSTED Exhausted all instances of placeable process [chars] possible

Explanation    Exhausted all instances of placeable process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-PROCEVENT_REGISTER Unable to register with enf for sysmgr proc events:[chars]

Explanation    Unable to register with enf for sysmgr proc events.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-PTHREAD_CREATE Failed to create thread: [chars]

Explanation    PlaceD daemon was unable to create the thread.

Recommended Action    Automatically restarts & attempts to do a pthread_create.

Error Message     
 
    
    
   

%OS-PLACED-3-PTHREAD_DETACH Failed to detach pthread: [chars]

Explanation    PlaceD daemon was unable to detach the thread.

Recommended Action    Automatically restarts.

Error Message     
 
    
    
   

%OS-PLACED-3-SYSDB_BIND Unable to bind to sysdb-[hex]:[chars]

Explanation    Unable to bind to sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-SYSDB_STARTUPLIST Unable to add [dec] to startup list:[chars]

Explanation    Unable to prepare startup list.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-SYSDB_UNBIND Unable to unbind from sysdb-[hex]:[chars]

Explanation    Unable to unbind from sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-SYSMGR_REGN Error registering for [chars] with sysmgr:[chars]

Explanation    Unable to register with sysmgr.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_DELETE Error deleting [chars] from [chars] table:[chars]

Explanation    Unable to delete object from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_DUPE Multiple objects [chars] found from [chars] table

Explanation    Query returned multiple objects.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_EMPTY Table Empty Address: [hex]

Explanation    Query returned table empty.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_FIND Error finding [chars] from [chars] table:[chars]

Explanation    Unable to find object from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_INIT Unable to initialize [chars] table:[chars]

Explanation    Unable to initialize table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_INSERT Error inserting [chars] into [chars] table:[chars]

Explanation    Unable to delete object from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_MALLOC Unable to malloc:[chars]

Explanation    Unable to malloc.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TABLE_READ Error reading [chars] from [chars] table:[chars]

Explanation    Unable to read object from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TIMER_CREATE Error creating node leaf timer:[chars]

Explanation    Unable to create leaf for node timer tree.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TREE_CREATE Error creating node timer tree:[chars]

Explanation    Unable to create node related timer tree.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TUPLE_MISSING Tuple [chars] missing from [chars] table

Explanation    Tuple missing from table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TUPLE_REREGISTER Re-registering for tuple:[chars]

Explanation    Re-registering for tuple.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-TUPLE_UNKNOWN Unknown tuple:[chars]

Explanation    Unknown tuple.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-UNEXPECTED_MSG Received unexpected message:[chars]

Explanation    Received unexpected message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-UNEXPECTED_REQ Received unexpected request:[dec]

Explanation    Received unexpected message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-UNKNOWN_TIMER Unknown timer fired type:[dec]

Explanation    Timer, with unknown timer-id, fired.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-UNLOCK_MUTEX Failed to unlock mutex: [chars]

Explanation    PlaceD daemon was unable to unlock mutex.

Recommended Action    Automatically restarts.

Error Message     
 
    
    
   

%OS-PLACED-3-VS_NOTIF Unknown vs notif:[chars] found:[dec]

Explanation    Unknown vs notif from sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-VS_REGN Unable to reg. item [chars] with sysdb:[chars]

Explanation    Unable to register for item with sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ZERO_LEVEL Zero level started placeable processes from Proc-table

Explanation    No level started placeable processes found in the table.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-3-ZERO_RECORDS No singleton processes in the table

Explanation    Query returned table empty.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-DLRSC Failed to determine whether running on dLRSC: [chars]

Explanation    PlaceD was unable to determine whether it was running on the dLRSC, and therefore failed to initialize.

Recommended Action    None - PlaceD should restart and recover by itself. If the message recurs: Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support placement command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support placement output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-DLRSC_UNKNOWN Failed to get dLRSC from local lrd: [chars]

Explanation    PlaceD was unable to dLRSC from local lrd.

Recommended Action    None - PlaceD should restart and recover by itself. If the message recurs: Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support placement command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support placement output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-EVENT_BLOCK Error waiting for message - ignoring: [chars]

Explanation    An error occured whilst PlaceD was waiting for a messages, PlaceD ignored the error and continued to wait for more messages.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-PROC_READY Failed to signal end of initialization: [chars]

Explanation    PlaceD was unable to inform SysMgr that it had completed its initialization.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-UNKNOWN_MSG Ignoring unrecognized message (comp ID: [dec], msg no: [dec])

Explanation    PlaceD did not recognize a message it received, and therefore ignored it.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLACED-7-UNKNOWN_REQTYPE Received unknown EOI req type from [dec]: type:[dec]

Explanation    PlaceD received an unknown message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLATFORM_LPTS_COM_IFIB Messages

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    error in IFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    Error in IFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -From the Shell prompt of LC and RP, fetch the file /pkg/etc/inflow.conf

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -From the Shell prompt of LC and RP, fetch the file /pkg/etc/inflow.conf

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -From the Shell prompt of LC and RP, fetch the file /pkg/etc/inflow.conf

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -From the Shell prompt of LC and RP, fetch the file /pkg/etc/inflow.conf

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-ERR_MEM_ALLOC Failed to allocate memory

Explanation    The system failed to allocate memory. It's likely that the system is running low in memory.

Recommended Action    This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG [chars]: Missing configuration for IFIB flow handling

Explanation    No configuration for IFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG [chars]: Missing configuration for IFIB flow handling

Explanation    No configuration for IFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    A healthy running box, should not hit this point. Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG_MEMORY [chars]: Insufficient memory for IFIB flow handling configuration

Explanation    Insufficient memory was available for storing the IFIB flow handling configuration. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG_MEMORY [chars]: Insufficient memory for IFIB flow handling configuration

Explanation    Insufficient memory was available for storing the IFIB flow handling configuration. Default characteristics will be used for all packets.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show memory summary -show memory heap summary all

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when calling debug_cleanup() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug. This is not a critical error, and the process can continue functioning normally despite this failure. Particular undebug will not be effective though.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show logging process pifibm_server_rp loc active RP

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when calling the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug. This is not a critical error, and the process can continue functioning normally despite this failure. Particular debug will not be effective though.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show logging process pifibm_server_rp loc active RP

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when calling debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug. This is not a critical error, and the process can continue functioning normally despite this failure. Particular debug will not be effective though.

Recommended Action    Collect Console logs and following Information and contact TAC support with this Info. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. -show logging process pifibm_server_rp loc active RP

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_IFIB-7-ERR_DEBUG_INIT [chars]: [chars]

Explanation    An error was returned when initializing debug. The facility to debug the component may not work.

Recommended Action    Debug message only. No action is required.

PLATFORM_LPTS_COM_NETIO Messages

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when calling debug_cleanup() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when calling the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when calling debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_COM_NETIO-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLATFORM_LPTS_LIB Messages

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_LIB-7-ERR_DEBUG_INIT [chars]: [chars]

Explanation    An error was returned when initializing debug. The facility to debug the component may not work.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_LIB-7-ERR_DEBUG_INIT [chars]: [chars]

Explanation    An error was returned when initializing debug. The facility to debug the component may not work.

Recommended Action    Debug message only. No action is required.

PLATFORM_LPTS_PIFIB Messages

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-BACKEND_EDM [chars]: EDM backend function [chars] failed: [chars]

Explanation    An internal EDM backend function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-BACKEND_EDM [chars]: EDM backend function [chars] failed: [chars]

Explanation    An internal EDM backend function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-BAG [chars]: Bag function [chars] failed: [chars]

Explanation    An internal bag function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-BAG [chars]: Bag function [chars] failed: [chars]

Explanation    An internal bag function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CGM_INIT [chars]: cgm_init failed: [chars]

Explanation    An internal cgm_init function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CGM_INIT [chars]: cgm_init failed: [chars]

Explanation    An internal cgm_init function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CHKPT_INIT [chars]: Checkpoint Initialization function [chars] failed: [chars]

Explanation    An internal Checkpoint function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CHKPT_INIT [chars]: Checkpoint Initialization function [chars] failed: [chars]

Explanation    An internal Checkpoint function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_FLOW_MEMORY [chars]: Insufficient memory for flow configuration

Explanation    There is insufficient memory for the flow configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_FLOW_MEMORY [chars]: Insufficient memory for flow configuration

Explanation    There is insufficient memory for the flow configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_MEMORY [chars]: Insufficient memory for policer configuration

Explanation    There is insufficient memory for the policer configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_MEMORY [chars]: Insufficient memory for policer configuration

Explanation    There is insufficient memory for the policer configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_INVALID [chars]: Invalid parameter '[chars]' after '[chars]' in policer '[dec]' definition

Explanation    There is an invalid parameter after a keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_INVALID [chars]: Invalid parameter '[chars]' after '[chars]' in policer '[dec]' definition

Explanation    There is an invalid parameter after a keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_MISSING [chars]: Missing parameter after '[chars]' in policer '[dec]' definition

Explanation    There is a missing required parameter after a keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_MISSING [chars]: Missing parameter after '[chars]' in policer '[dec]' definition

Explanation    There is a missing required parameter after a keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in policer '[dec]' definition

Explanation    There is an unknown keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in policer '[dec]' definition

Explanation    There is an unknown keyword in a policer definition. The policer may be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNDEFINED_POLICER [chars]: flow '[chars]' references undefined policer '[dec]'

Explanation    An input flow definition references an undefined policer. The flow will be configured to use policer 0.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNDEFINED_POLICER [chars]: flow '[chars]' references undefined policer '[dec]'

Explanation    An input flow definition references an undefined policer. The flow will be configured to use policer 0.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-CPP_LPTS_EA_REGISTER [chars]: cpp_lpts_ea_register failed: [chars]

Explanation    An internal cpp_lpts_ea_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_IFH_UIDB_INDEX Failed to find uidb index for interface handle [hex]

Explanation    Failed to find uidb index for an given interface handle. It is likely to be caused by a programming bug or a programming problem happened in the past.

Recommended Action    Run the command 'show uidb index' to verify whether the uidb index is created for the interface. Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_IFH_UIDB_INDEX Failed to find uidb index for interface handle [hex]

Explanation    Failed to find uidb index for an given interface handle. It is likely to be caused by a programming bug or a programming problem happened in the past.

Recommended Action    Run the command 'show uidb index' to verify whether the uidb index is created for the interface. Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_IPV6_COMPRESS Failed to perform IPV6 compress, tm_rc equals [hex], prefix_len equals [hex]

Explanation    The IPv6 compression fail under fatal error condition.

Recommended Action    When this issue happens, it will trigger an automatic restart.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_IPV6_COMPRESS Failed to perform IPV6 compress, tm_rc equals [hex], prefix_len equals [hex]

Explanation    The IPv6 compression fail under fatal error condition.

Recommended Action    When this issue happens, it will trigger an automatic restart.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_MEM_ALLOC Failed to allocate memory

Explanation    The system failed to allocate memory. It's likely that the system is running low in memory.

Recommended Action    When this issue happens, it will trigger an automatic restart. This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_MEM_ALLOC Failed to allocate memory

Explanation    The system failed to allocate memory. It's likely that the system is running low in memory.

Recommended Action    When this issue happens, it will trigger an automatic restart. This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_NOTIF_Q_FULL The queue for notifications from [chars] is full

Explanation    Too many notifications have been sent to the component. The queue to hold the notification has overflowed.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-ERR_NOTIF_Q_FULL The queue for notifications from [chars] is full

Explanation    Too many notifications have been sent to the component. The queue to hold the notification has overflowed.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_CREATE [chars]: could not create event connection: [chars]

Explanation    An internal error was detected when trying to create event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_CREATE [chars]: could not create event connection: [chars]

Explanation    An internal error was detected when trying to create event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_OPEN [chars]: could not open event connection: [chars]

Explanation    An internal error was detected when trying to open event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_OPEN [chars]: could not open event connection: [chars]

Explanation    An internal error was detected when trying to open event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_ADD_FEAT2GRP [chars]: fm add feat to group failed for ISIS [chars]

Explanation    An internal fm add feature to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_ADD_FEAT2GRP [chars]: fm add feat to group failed for ISIS [chars]

Explanation    An internal fm add feature to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_ADD_IFH2GRP [chars]: fm add ifh to group failed for ISIS [chars]

Explanation    An internal fm add ifh to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_ADD_IFH2GRP [chars]: fm add ifh to group failed for ISIS [chars]

Explanation    An internal fm add ifh to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_CREATE_GROUP [chars]: fm create group failed: [chars]

Explanation    An internal fm create group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_CREATE_GROUP [chars]: fm create group failed: [chars]

Explanation    An internal fm create group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_FEAT_PROCESSING [chars]: fm feature registration failed: [chars]

Explanation    An internal fm feature registration function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_FEAT_PROCESSING [chars]: fm feature registration failed: [chars]

Explanation    An internal fm feature registration function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_REGISTER [chars]: fm_register failed: [chars]

Explanation    An internal fm_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-FM_REGISTER [chars]: fm_register failed: [chars]

Explanation    An internal fm_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-HA_WAIT [chars]: [chars]

Explanation    An internal cpp_ha_platform_wait_for_platform_state function still waiting for HA ready state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-HA_WAIT [chars]: [chars]

Explanation    An internal cpp_ha_platform_wait_for_platform_state function still waiting for HA ready state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-HFA_REGISTER [chars]: hfa_register failed: [chars]

Explanation    An internal hfa_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-HFA_REGISTER [chars]: hfa_register failed: [chars]

Explanation    An internal hfa_register function failed for pifib.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-LTRACE_INIT [chars]: ltrace_init2 failed: [chars]

Explanation    An internal ltrace_init2 function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-LTRACE_INIT [chars]: ltrace_init2 failed: [chars]

Explanation    An internal ltrace_init2 function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-MSG_ATTACH [chars]: Event Mgr function [chars] failed: [chars]

Explanation    An internal Event Manager function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-MSG_ATTACH [chars]: Event Mgr function [chars] failed: [chars]

Explanation    An internal Event Manager function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-NO_CONFIG [chars]: Missing configuration for PIFIB flow handling

Explanation    No configuration for PIFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-NO_CONFIG [chars]: Missing configuration for PIFIB flow handling

Explanation    No configuration for PIFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHM_INIT [chars]: platform pre-IFIB shared memory init failed: ([chars]) [chars]

Explanation    An internal shared memory function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHM_INIT [chars]: platform pre-IFIB shared memory init failed: ([chars]) [chars]

Explanation    An internal shared memory function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_CLOSE [chars]: Cleanup for EDM failed: [chars]

Explanation    Cleanup for EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_CLOSE [chars]: Cleanup for EDM failed: [chars]

Explanation    Cleanup for EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_INIT [chars]: Initialization for show EDM failed: [chars]

Explanation    Initialization for show EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_INIT [chars]: Initialization for show EDM failed: [chars]

Explanation    Initialization for show EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SYSDB [chars]: Sysdb function [chars] failed: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-SYSDB [chars]: Sysdb function [chars] failed: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-TCAM_FMT_TO_HFA_MAP [chars]: vmr_builder_program_tcam_fmt_from_hfa_map failed: [chars]

Explanation    An tcam format to hfa mapping function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-TCAM_FMT_TO_HFA_MAP [chars]: vmr_builder_program_tcam_fmt_from_hfa_map failed: [chars]

Explanation    An tcam format to hfa mapping function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-3-UIDB_INDEX : [chars]: Out of range uidb index for ifhandle [hex]: [int]

Explanation    An internal API to retrieve hardware details failed for an interface. LPTS may not be functioning properly on the interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_MSTATS_ALLOC Failed to allocate HW counters.

Explanation    It failed to allocate HW counters. It may be because of running out of HW counters or encountering internal error.

Recommended Action    Disable the numbers of non crucial services which use HW counters.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_PRM_STATS_ALLOC Failed to allocate HW counters.

Explanation    It failed to allocate HW counters. It may be because of running out of HW counters or encountering internal error.

Recommended Action    Disable the numbers of non crucial services which use HW counters.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_INVALID_REG_NAME Found the Pre-IFIB region with unrecognized name: [chars]

Explanation    A Pre-IFIB region with unrecognized name is found in the TCAM. It is likely caused by a programming bug or a programming problem happened in the past.

Recommended Action    Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_INVALID_REG_NAME Found the Pre-IFIB region with unrecognized name: [chars]

Explanation    A Pre-IFIB region with unrecognized name is found in the TCAM. It is likely caused by a programming bug or a programming problem happened in the past.

Recommended Action    Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_OVERFLOW Does not have enough space for the Pre-IFIB entry in TCAM region [chars]

Explanation    TCAM space is not enough for all Pre-IFIB entries in the particular TCAM region. All control packets which do not have matching Pre-IFIB entries in TCAM will use SW path to forward to destinations.

Recommended Action    Disable the numbers of services configured for the system.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_OVERFLOW Does not have enough space for the Pre-IFIB entry in TCAM region [chars]

Explanation    TCAM space is not enough for all Pre-IFIB entries in the particular TCAM region. All control packets which do not have matching Pre-IFIB entries in TCAM will use SW path to forward to destinations.

Recommended Action    Disable the numbers of services configured for the system.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_PREFIX_COMPRESS Failed to have IPv6 prefix compressed

Explanation    IPv6 prefix compression failed because the line card has run out of internal resources for compressing a prefix. It shouldn't have any major impact on the system service. The in-bound (destined to the system) packets can still reach destinations through SW path.

Recommended Action    Try either change the prefix length or change the prefix value of IPv6 addressees used in the system if possible.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-5-ERR_TCAM_PREFIX_COMPRESS Failed to have IPv6 prefix compressed

Explanation    IPv6 prefix compression failed because the line card has run out of internal resources for compressing a prefix. It shouldn't have any major impact on the system service. The in-bound (destined to the system) packets can still reach destinations through SW path.

Recommended Action    Try either change the prefix length or change the prefix value of IPv6 addressees used in the system if possible.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_CONN_INIT Failed to connect to [chars]: [chars]

Explanation    An internal error was detected when trying to connect to the respective component.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of the respective component because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_CONN_INIT Failed to connect to [chars]: [chars]

Explanation    An internal error was detected when trying to connect to the respective component.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of the respective component because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_DEBUG_INIT [chars]: [chars]

Explanation    An error was returned when initializing debug. The facility to debug the component may not work.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_DEBUG_INIT [chars]: [chars]

Explanation    An error was returned when initializing debug. The facility to debug the component may not work.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_INIT [chars]: [chars]

Explanation    An internal error was detected when trying to set up event connection.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_INIT [chars]: [chars]

Explanation    An internal error was detected when trying to set up event connection.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_ATTACH Could not set up a timer object: [chars]

Explanation    An internal error was detected when trying to allocate a timer object.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_ATTACH Could not set up a timer object: [chars]

Explanation    An internal error was detected when trying to allocate a timer object.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_LEAF_NEW Could not create a timer tree leaf object: [chars]

Explanation    An internal error was detected when trying to create a timer tree leaf object.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_EVM_TM_LEAF_NEW Could not create a timer tree leaf object: [chars]

Explanation    An internal error was detected when trying to create a timer tree leaf object.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_INIT_POLICERS Failed to initialize the flow policer [dec]: [chars]

Explanation    It failed to program a flow policer during initialization.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_INIT_POLICERS Failed to initialize the flow policer [dec]: [chars]

Explanation    It failed to program a flow policer during initialization.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_LTRACE_INIT Failed to initialize the ltrace buffer

Explanation    An internal error was detected when trying to initialize a ltrace buffer.

Recommended Action    When this issue happens, it will not able to use ltrace buffer for debugging. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_LTRACE_INIT Failed to initialize the ltrace buffer

Explanation    An internal error was detected when trying to initialize a ltrace buffer.

Recommended Action    When this issue happens, it will not able to use ltrace buffer for debugging. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_MIPC_INIT Failed to initialize with Metro IPC Server: [chars]

Explanation    An internal error was detected when trying to initialize with Metro IPC server.

Recommended Action    Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_MIPC_INIT Failed to initialize with Metro IPC Server: [chars]

Explanation    An internal error was detected when trying to initialize with Metro IPC server.

Recommended Action    Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_MIPC_NOTIF_ACK Failed to acknowledge a MIPC notification: [chars]

Explanation    It is an internal error which the system failed to acknowledge a MIPC Server notification.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_MIPC_NOTIF_ACK Failed to acknowledge a MIPC notification: [chars]

Explanation    It is an internal error which the system failed to acknowledge a MIPC Server notification.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_MSTATS_INIT Failed to initialize stats table: [chars]

Explanation    An internal error was detected when trying to initialize a statistic counter table.

Recommended Action    Check the status of Metro Stats Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_NOTIF_HANDLE Failed to handle [chars] notification: [chars]

Explanation    An internal error was detected when trying to handle a notification from the respective component.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_NOTIF_HANDLE Failed to handle [chars] notification: [chars]

Explanation    An internal error was detected when trying to handle a notification from the respective component.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_PRM_STATS_INIT Failed to initialize stats table: [chars]

Explanation    An internal error was detected when trying to initialize a statistic counter table.

Recommended Action    Check the status of Metro Stats Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_PROGRAM_ERRORED_POLICER Failed to reprogram the flow policer [dec]: [chars]

Explanation    An internal error was detected when trying to program the flow policer.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_PROGRAM_ERRORED_POLICER Failed to reprogram the flow policer [dec]: [chars]

Explanation    An internal error was detected when trying to program the flow policer.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_REPROGRAM_POLICERS Failed to program the flow policer [dec]: [chars]

Explanation    It failed to reprogram a flow policer when it had received a request to reprogram all flow policers to HW.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_REPROGRAM_POLICERS Failed to program the flow policer [dec]: [chars]

Explanation    It failed to reprogram a flow policer when it had received a request to reprogram all flow policers to HW.

Recommended Action    When this issue happens, it will trigger an automatic restart. Check the status of Metro IPC Server because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_SYSDB_DATALIST_CREATE Sysdb datalist function failed to create an object handle: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_SYSDB_DATALIST_CREATE Sysdb datalist function failed to create an object handle: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    When this issue happens, it will trigger an automatic restart. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_TCAM_INIT Failed to initialize TCAM regions: [chars]

Explanation    An internal error was detected when trying to initialize TCAM regions.

Recommended Action    Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PLATFORM_LPTS_PIFIB-7-ERR_TCAM_INIT Failed to initialize TCAM regions: [chars]

Explanation    An internal error was detected when trying to initialize TCAM regions.

Recommended Action    Check the status of TCAM Manger because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PMHAC Messages

Error Message     
 
    
    
   

%OS-PMHAC-7-ERR_DLL_INIT PM HA Client DLL failed to initialize debugging services, reason [chars]

Explanation    The Platform Manager HA DLL encountered an internal software error. The debugging services could not be initialized. This problem should rarely happen. Restarting the Platform Manager HA process might recover the problem

Recommended Action    There is no action required because the client process should handle this error.

PMHAD Messages

Error Message     
 
    
    
   

%OS-PMHAD-3-ERR_NOMEM [chars]

Explanation    The Platform Manager HA Driver DLL was unable to add any new fault record due to lack of memory. This condition will cause the DLL to exit.

Recommended Action    Add more memory to the card specified in the System Message. If the this message recurs after a memory upgrade, copy the System Message text exactly as it appears on the console or in the system log, and contact your Cisco technical support representative, and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PMHAD-4-ERR_NOMEM_WARNING [chars]

Explanation    The Platform Manager HA Driver DLL was unable to add one new fault record due to lack of memory, but it is still running.

Recommended Action    Add more memory to the card specified in the System Message. If the this message recurs after a memory upgrade, copy the System Message text exactly as it appears on the console or in the system log, and contact your Cisco technical support representative, and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PMHAD-7-ERR_DLL_INIT [chars], reason [chars]

Explanation    The Platform Manager HA Driver DLL encountered an internal software error. The debugging services could not be initialized. This problem should rarely happen. Restarting the Platform Manager HA process might recover the problem

Recommended Action    There is no action required because the client process should handle this error.

Error Message     
 
    
    
   

%OS-PMHAD-7-ERR_INIT [chars], reason: [chars]

Explanation    The Platform Manager HA Driver DLL was unable to initialize due to internal software resource issues.

Recommended Action    The Platform Manager HA Driver DLL will exit and the client process should handle the error accordingly. Please exam the output of show logging to see if similar issue had occured.

PROCFIND Messages

Error Message     
 
    
    
   

%OS-PROCFIND-4-NODETYPE Running on unknown nodetype, assuming it is a linecard

Explanation    Procfind was did not recognize the node type on which it was running, and therefore assumed it was a linecard.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-6-EVENT_BLOCK Error waiting for message - ignoring: [chars]

Explanation    An error occured whilst Procfind was waiting for messages, Procfind ignored the error and continued to wait for more messages.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-6-PROC_INFO Failed to retrieve info for process [dec]: [chars]

Explanation    Procfind was unable to read the information for the specified process, and will therefore return incomplete results.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-6-PROC_OPEN Failed to open process [dec]: [chars]

Explanation    Procfind was unable to open the specified process, and will therefore return incomplete results.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-6-READY Failed to signal end of initialization to SysMgr: [chars]

Explanation    Procfind was unable to inform System Manager that it has finished initializing and is ready to service request. Procfind ignored the error and continued normally.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-7-EVENT_MGR Failed to create an event manager: [chars]

Explanation    Procfind was unable to create an event manager for receiving messages, and therefore failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-7-MEMORY Failed to allocate memory for [chars]

Explanation    Insufficient resources were available to allocate memory for the specified item. Procfind may not be able to continue running.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-PROCFIND-7-NODEID Failed to get node ID of current node: [chars]

Explanation    Procfind was unable to determine the ID of the node on which it was running, and therefore failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-7-SYSDB_BIND Failed to bind to SysDB at '[chars]': [chars]

Explanation    Procfind was unable to bind to the SysDB server, and therefore failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-7-SYSDB_EDM_INIT Failed to initialize SysDB EDM functions handle: [chars]

Explanation    Procfind was unable to initialize its SysDB EDM functions handle, and therefore failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-PROCFIND-7-SYSDB_EDM_REG Failed to register with SysDB as an EDM at '[chars]': [chars]

Explanation    Procfind was unable to register with the SysDB server for as an EDM, and therefore failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PUF Messages

Error Message     
 
    
    
   

%OS-PUF-4-MCAST_MSG Problem processing incoming multicast message: [chars]

Explanation    An incoming multicast message was received, supposedly containing data that should be persisted to non-volatile storage on the receiving location, but this persisting operation could not complete because of a problem.

Recommended Action    This is unlikely to be immediately threatening to the router's health, but could cause misbehavior if the router is reloaded. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QAD_LIB Messages

Error Message     
 
    
    
   

%OS-QAD_LIB-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QAD_LIB-6-INFO Condition [chars] : [chars]

Explanation    The specified condition has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QAD_QUEUE_MODEL Messages

Error Message     
 
    
    
   

%OS-QAD_QUEUE_MODEL-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QAD_SERVER Messages

Error Message     
 
    
    
   

%OS-QAD_SERVER-3-ERROR Operation [chars] failed : [chars]

Explanation    The specified operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QNET_LC Messages

Error Message     
 
    
    
   

%OS-QNET_LC-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetbase_builder_func() called with bad chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called!

Explanation    qnetbase_control_func() wrongly called.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetcaps_builder_func() called with wrong chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-CAPS_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Caps Control function erroneously called!

Explanation    qnetcaps_control_func() has been called, which should never happen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-DUPLICATE_BMA_PAK [chars]: Cannot duplicate BMA packet (rc equals [dec] dropping Qnet packet.

Explanation    pak_netio_duplicate() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called!

Explanation    qnetcaps_encaps() has been called, which should never happen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-LOST_QNET_CONN Lost connection to Qnet process; dropping packets.

Explanation    netio_dll_packet_input_NEW() to Qnet failed and Qnet connection is closed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec])

Explanation    netio_dll_packet_input_NEW() to Qnet failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec]

Explanation    pak_netio_uint32_get() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QNET Messages

Error Message     
 
    
    
   

%OS-QNET-0-EMG [chars]

Explanation    An EMERGENCY level message was emitted by QNET.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-1-ALT [chars]

Explanation    An ALERT level message was emitted by QNET.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-2-CRT [chars]

Explanation    A CRITICAL level message was emitted by QNET.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-2-FATAL Fatal: [chars]

Explanation    some fatal error has happened.

Recommended Action    This should not occur in normal conditions

Error Message     
 
    
    
   

%OS-QNET-3-ERR [chars]

Explanation    An ERROR level message was emitted by QNET.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-4-DUMPER_SNAP_DUMP Process [dec] requested voluntary [chars] dump of itself

Explanation    A non-invasive voluntary coredump requested by the process. Process might be experiencing a condition which needs investigation. This core file will help analyzing the issue.

Recommended Action    This should not occur in normal conditions, please provide the coredump to TAC.

Error Message     
 
    
    
   

%OS-QNET-4-DUMPER_SNAP_NODUMP Problem with voluntary core dump requested by [dec] when [chars]: [chars]

Explanation    A non-invasive voluntary coredump was requested by the process, but a problem occured that prevented the coredump from being created.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-4-WRN [chars]

Explanation    A WARNING level message was emitted by QNET.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET-5-NOT [chars]

Explanation    A NOTICE level message was emitted by QNET.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-QNET-6-DUMPER_SNAP_DUMP_OK Voluntary core dump requested by process [dec] completed

Explanation    A non-invasive voluntary coredump requested by the process completed successfully. Process might be experiencing a condition which needs investigation. This core file will help analyzing the issue.

Recommended Action    This should not occur in normal conditions, please provide the coredump to TAC.

Error Message     
 
    
    
   

%OS-QNET-6-INF [chars]

Explanation    An INFO level message was emitted by QNET.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-QNET-7-DEB [chars]

Explanation    A DEBUG level message was emitted by QNET.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QNET-7-SIO_Q_PROD q_produce for QNET tx failed, rc equals [dec]

Explanation    could not send pkt to fabric driver.

Recommended Action    This should not occur in normal conditions

QSM Messages

Error Message     
 
    
    
   

%OS-QSM-3-ADD_SYMLINKS_DIR Unable to add directory link [chars]: [chars]

Explanation    A error occured while processing a QSM configuration file. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impaired.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-ADD_SYMLINKS_FILE Unable to add link [chars]-[chars]: [chars]

Explanation    A error occured while processing a QSM configuration file. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impaired.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-BAD_DBDUMP_MESSAGE An database dump message from another node could not be processed ([chars]): [chars]

Explanation    The indicated error occured while processing a dbdump from another node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-BAD_MESSAGE An unexpected message from another node could not be processed ([chars]): [dec]

Explanation    An invalid message type was received from another node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-BAD_UPDATE_MESSAGE An update message from another node could not be processed ([chars]): [chars]

Explanation    The indicated error occured while processing an update from another node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CERR_REGISTER Unable to register the QSM error messages: [chars]

Explanation    The QSM error number/messages table could not be registered with the cerrno system. Error translations will not be available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_OPEN Unable to open QSM checkpoint file [chars]: [chars]

Explanation    The checkpoint file could not be opened. A restart of QSM is likely to have incomplete data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_RELOAD Unable to re-load QSM link [chars]-[chars]: [chars]

Explanation    A link found in the checkpoint file could not be created in the QSM database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_RELOAD_NOTIFY Unable to re-load QSM notification for [chars]: [chars]

Explanation    A link found in the checkpoint file could not be created in the QSM database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_RENAME Unable to rename checkpoint file [chars]-[chars]: [chars]

Explanation    The checkpoint temporary file could not be renamed. A restart of QSM is likely to have incomplete data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_SEEK Unable to seek to the end of the QSM checkpoint file [chars]: [chars]

Explanation    The checkpoint file could not be appended to. A restart of QSM is likely to have incomplete data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_TRUNCATE Unable to truncate QSM checkpoint file [chars]: [chars]

Explanation    The QSM checkpoint file could not be truncated -- prior to being overwritten with updated data. A restart of QSM is likely to have incomplete data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_CANT_WRITE Unable to write to QSM checkpoint file [chars]: [chars]

Explanation    A link could not be written to the QSM checkpoint file. A restart of QSM is likely to have incomplete data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_FORMAT Insufficient buffer size to format QSM checkpoint record. Have [dec], need [dec]

Explanation    A QSM checkpoint record could not be placed in the checkpoint file due to insufficient buffer space.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_LOCK_FAILURE Checkpoint lock failure: [chars]

Explanation    The lock that protects the QSM checkpoint database could not be taken. The checkpoint database could become corrupted -- causing a restart of QSM to have incomplete data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-CHECKPOINT_NOSPACE Unable to allocate space for the checkpoint buffer

Explanation    A QSM checkpoint record could not be placed in the checkpoint file due to insufficient heap space.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-QSM-3-INITIALIZATION_FAILURE Unable to initialize [chars]: [chars]

Explanation    The QSM process wasn't able to startup up due the indicated failure during initialization. A restart of the process will be attempted. If the process can not be successfully started after several attempts, the board will probably be unusable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-INVALID_PLATFORM_TYPE Platform_get_type returned an unknown node type: [dec]

Explanation    The QSM process wasn't able to startup up due the indicated failure during initialization. A restart of the process will be attempted. If the process can not be successfully started after several attempts, the board will probably be unusable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-INVALID_SYMLINKS_FILE Invalid line in symlinks file: [chars]

Explanation    A startup configuration file for QSM contained an invalid line. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impaired.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_BAD_MODE A Link database entry had an unexpected mode: 0o%o

Explanation    The mode data (MOG) for a link entry had an unexpected value. This could indicate a memory corruption problem.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_CREATE_FAILURE Unable to create link database entry '[chars]' ([chars]): [chars]

Explanation    An entry could not be placed in the links database. The full error message should indicate where the failure occured and why.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_DELETE_FAILURE_INUM Unable to delete link database entry: [dec]

Explanation    A link could not be deleted from the links database. This could indicate either a code problem or a memory corruption problem.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_DELETE_FAILURE_PATH Unable to delete link database entry: [chars]

Explanation    An entry could not be deleted from the links database. The full error message should indicate where the failure occured and why.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_FREE_ZERO_INUM The QSM links database was requested to free a inode with a zero inumber

Explanation    A internal error occured. A small amount of memory has been lost. QSM can be restarted to recover the lost memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_INVALID_CUR_INDEX Invalid cur index in [chars]. CUR: [dec], path: [chars], inum: [dec]

Explanation    A internal error has occured. The QSM directory scrub routine has been aborted. This should not cause any instability unless this message is repeated many times.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_LOCK_FAILURE A lock failure occured in the links database ([chars]():[chars]): [chars]

Explanation    An expected database lock was not held. This could indicate a memory corruption problem.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LINK_WRONG_RESULT link delete returned wrong link entry. path [chars], result: [hex], delete_result: [hex]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-3-LOCATE_SYMLINKS_FILE Unable to locate symlinks file at etcpath [chars]: [chars]

Explanation    An expected startup configuration file for QSM could not be found. This could be due to an install problem or due to data being deleted from the installation file system. QSM will continue startup-up, but some system functionality may be impaired.

Recommended Action    Your installed file system is missing a file. Perform a re-install to refresh the missing file. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LOCK_FAILURE A lock failure occured ([chars]): [chars]

Explanation    The indicated error occurred while attempting to hold or release a lock.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-LOCK_FAILURE_LOCKTEST [chars]: [dec]. A lock failure occured ([chars]): [chars]

Explanation    The indicated error occurred while attempting to hold or release a lock.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-NO_MEMORY Unable to obtain [dec] bytes of memory while: [chars]

Explanation    QSM could not obtain system memory while performing the indicated operation.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-QSM-3-NON_ADMIN_ADD (transition message) Detected NON admin plane add for [chars]. class: [hex], svctype: [hex], msgflags: [hex]

Explanation    Development debug message

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-3-NOTIFY_LOCK_FAILURE A lock failure occured in the notification database ([chars]): [chars]

Explanation    An expected database lock was not held. This could indicate a memory corruption problem.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-NOTIFY_WRITE_FAILED Notification checkpoint record could not be written: [chars]

Explanation    A notification record could not be written to the QSM notification checkpoint file. A restart of QSM is likely to have incomplete data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-OPEN_SYMLINKS_FILE Unable to open symlinks file [chars]: [chars]

Explanation    An expected startup configuration file for QSM could not be opened. This could be due to a problem with the installed media or file system damage. QSM will continue startup-up, but some system functionality may be impaired.

Recommended Action    Your installed file system may be corrupted. Perform a format and re-install to fix it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-3-SEND_DATABASE_MESSAGE Unable to send a database message ([chars]): [chars]

Explanation    A database update or dump message could not be sent to the other nodes.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-ADMIN_ADD (transition message) Detected admin plane add for [chars]. class: [hex], svctype: [hex], msgflags: [hex]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-BAD_LWM_MSG Bad LWM Message received from pid [dec]. ([chars]): [chars]

Explanation    An error was received while processing a request from a local process. There could be a version mis-match or corruption in the client process. The error message should provide some clue to the problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-BAD_LWM_VERSION A QSM message was received, but it had the wrong version number. Received: [hex], Expected: [hex].

Explanation    An error was received while processing a request from a local process. There could be a version mis-match or corruption in the client process. The error message should provide some clue to the problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-DEBUG_KEY_CREATE Could not create key. rc: [dec], qsm_lock_key: [dec]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-DEBUG_SPECIFIC_ALLOC Could not allocate space for thread specific lock data: [chars]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-DEBUG_SPECIFIC_SET Could not set thread specific for lock data: [chars]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LINK_BAD_THREAD_INUM A link was not threaded correctly in the links database ([chars]). thread: [dec]. inum: [dec]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LINK_BAD_THREAD_PATH A link was not threaded correctly in the links database ([chars]). thread: [dec]. path: [chars]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LINK_LOST_EMPTY_DIRECTORY An empty directory was to be deleted but inode [dec] could not be found: [chars]

Explanation    An empty directory was to be automatically purged from the QSM database. When the directory was searched for, it could not be found.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LOCK_HELD Unexpected lock held at [chars]: [dec]. Last taken at [chars]: [dec]

Explanation    This is a debug message that is not compiled into a customer version of the code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LOCK_NOTFOUND A lock list did not have an expected lock at [chars]: [dec]

Explanation    The lock list was corrupted.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LOCK_WRONG_COUNT A lock list had an incorrect count at [chars]: [dec]. ([dec] vs [dec])

Explanation    The lock list was corrupted.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LOCKORDER_FAILURE A lock ordering failure occured ([chars]) at [chars]:[dec]. ([dec] vs [dec]).

Explanation    A lock was taken in an invalid sequence.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-LOCKORDER_UPGRADE A lock upgrade (read to write) attempt was made at [chars]:[dec]. The lock was first taken at [chars]:[dec]

Explanation    An invalid upgrade was made of a lock.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-NODE_DELETE_FAILURE A node was only partially deleted. thread [dec], node: [chars]

Explanation    Internal memory corruption occured in the QSM nodes database.

Recommended Action    Take a dump of the process and restart it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-NODE_LOOKUP_FAILURE A node could not be found in the QSM nodes database: [chars]

Explanation    An attempt to use a QSM link was made -- but the remote node that exported the link to the local node was not in the local nodes database. This could be a harmless timing condition.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-NON_LOCAL A QSM message was received from a non-local process

Explanation    A process on another node contacted the local QSM server. The local server refused the request.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QSM-7-NOTIFY_REGISTER_FAILED notification register of [chars] failed: [chars]

Explanation    A application requested database notification could not be placed in the QSM notification database. An error will be returned to the client process.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%OS-QSM-7-NOTIFY_UNREGISTER_FAILED notification register of [dec] failed: [chars]

Explanation    A application requested database un-notification could not be removed from the QSM notification database. An error will be returned to the client process.

Recommended Action    Debug message only. No action is required.

QUEUE Messages

Error Message     
 
    
    
   

%OS-QUEUE-7-LINKED Bad [chars] of [hex] in queue [hex]

Explanation    The router is running short on memory.

Recommended Action    It may be necessary to free some memory by exiting a program. If this message recurs, call your technical support representative for assistance.

Error Message     
 
    
    
   

%OS-QUEUE-7-NOTQ [chars] didn't find [hex] in queue [hex]

Explanation    An internal software error occurred.

Recommended Action    If any of these messages recur, call your technical support representative for assistance.

Error Message     
 
    
    
   

%OS-QUEUE-7-QCOUNT Bad [chars] [hex] count [dec]

Explanation    An internal software error occurred.

Recommended Action    If any of these messages recur, call your technical support representative for assistance.

RDS Messages

Error Message     
 
    
    
   

%OS-RDS-2-IDT_FAILED IDT for replica [chars] (all handles) FAILED

Explanation    IDT for the specified replica has totally failed and the process will do a voluntary dump to recover.

Recommended Action    If this message is seen for a particular process on a particular node continuously then contact support

Error Message     
 
    
    
   

%OS-RDS-3-ALLOC_FAILURE_MSG could not allocate for [chars], len equals [dec], errno equals [dec]

Explanation    This is a generic error msg for memory allocation failure.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-ASSERT_MSG [chars].[dec]: hit assert condition. 'val1 equals [hex]' expected to be [chars] 'val2 equals [hex]'

Explanation    rds hit an internal assert.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-BAD_READ ens_[chars] returned len equals [dec] for DH_ENTRY: [hex], expected equals [dec]

Explanation    ens_read returned bad len.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-BAD_SEQNUM UNEXPECTED rdr_dh_seqnum equals [dec] rhdr.seq_num equals [dec] for DH equals [hex], dlen equals [dec], rdr_data equals [pointer]

Explanation    ens_read returned data with bad seqnum.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-ENS_BULK_REGISTER [dec]: ens_bulk_register failed, rc equals [hex], errno equals [dec]

Explanation    ens_bulk_register failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-ENS_PRODUCER_RELEASE ens_producer_release for DH equals [hex] failed, errno equals [dec]

Explanation    ens_producer_release failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-ENS_PUBLISH [chars]: ens_publish for DH equals [hex] failed, errno equals [dec]

Explanation    ens_publish failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-ENS_REGISTER_CLASS [chars]: ens_register_class for replica_name equals [chars] ch equals [hex] failed, rc equals [hex], errno equals [dec]

Explanation    ens_bulk_register failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-GROUP_CREATE group_create for [chars]/[chars] failed, errno equals [dec]

Explanation    Group create failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-LOCK_FAILURE [chars] failed, errno equals [dec]

Explanation    Lock/Unlock operation failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-NRS_CREATE_CLASS [chars]: nrs_create_class for [chars] failed, errno equals [dec]

Explanation    nrs_create_class failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-NRS_REGISTER_BULK [chars]: nrs_register_bulk for CH equals [hex] failed, rc equals [dec] errno equals [dec]

Explanation    nrs_register_bulk failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-PENDING_MSG [chars]: could not create pending msg for CH equals [hex], DH equals [hex], errno equals [dec]

Explanation    Could not create pending msg for the incoming write/publish.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SEARCH_HDLS_FAILED --

Explanation    nrs_search for the specified replica did not yield any data handles.

Recommended Action    If this message is seen for a particular process on a particular node more than 5 times then contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SNAP_DUMP [chars]: handle equals [hex] memory ptr equals 0x[pointer]

Explanation    rds hit an internal error.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_CREATE TID equals [dec]: gs_sync_create failed for tag [hex], err [dec]

Explanation    Ticket create failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_RELEASE_FAILED TID equals [dec]: Ticket Release failed rp equals [pointer] tick equals [hex] curr equals [dec] hi equals [dec] currturn equals [hex] next equals [hex] waitcnt equals [dec] rc equals [dec] errno equals [dec]

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST TID equals [dec]: Ticket Request failed for ticket [hex], rp [pointer], err [dec]

Explanation    Ticket request failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST_TIMED_OUT TID equals [dec]: Tick Req Timed out rp equals [pointer] tick equals [hex] curr equals [dec] hi equals [dec] currturn equals [hex] next equals [hex] waitcnt equals [dec] rc equals [dec] errno equals [dec], RETRYING...

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST_UNEXPECTED TID equals [dec]: Tick Req unknown failure, rp equals [pointer] tick equals [hex] curr equals [dec] hi equals [dec] currturn equals [hex] next equals [hex] waitcnt equals [dec] rc equals [dec] errno equals [dec]

Explanation    Ticket request failed with unknown error.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-WRITE_TIMEDOUT rds_write DHDL equals [hex]([chars]), req equals [dec], resp equals [dec], #wtrs equals [dec]: [chars], errno equals [dec], retries equals [dec]

Explanation    rds_write request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-4-COND_TIMED_WAIT TID equals [dec]: Unexpected error equals [dec] from pthread_cond_timedwait cmd equals [dec]

Explanation    pthread_cond_timedwait failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-4-RING_LOOKUP Lookup of identifier equals [hex] index equals [hex] in RING equals [pointer] failed

Explanation    atomic tag ring lookup failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-BAD_RDSTYPE TID equals [dec]: [dec]: Wrong replica type passed, expected equals [dec].

Explanation    passed in replica_id is wrong.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-DUPLICATE_TICKET_NOTIF TID equals [dec]: [dec]: Duplicate Tick Notif (Dropping it) rp equals [pointer] tick equals [hex] curr equals [dec] hi equals [dec] currturn equals [hex] next equals [hex] TickCurr equals [dec] TickHi equals [dec] state equals [hex]

Explanation    Got a ticket notification, for an already active ticket.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GENERIC_FAILURE_MSG [chars][dec]

Explanation    This is a generic error msg.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GET_DH_ENTRY [dec]: No entry for Datahandle equals [hex], rp equals [pointer] vec equals [pointer] errno equals [dec]

Explanation    Could find datahandle entry in the vector for replica

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GET_REPLICA [dec]: [chars] for CH equals [hex], errno equals [dec], rds_type equals [dec]

Explanation    Could not get the replica entry

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GROUP_SEND_RINFO [chars]: group_send_rinfo failed GID equals [hex], errno equals [dec], rc equals [dec], #resp equals [dec], pattern equals [chars]

Explanation    group_send_rinfo failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GSM_FAIL GSM for [chars] Failed for Handle equals [hex], to (g:[hex]/n:[hex]/p:[dec]), errno equals [dec]

Explanation    group_send_memberset failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-INVALID_ARGS [dec]: invalid args passed

Explanation    a function was invoked with invalid arguments

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-INVALID_RHDR [dec]: invalid rhdr equals [pointer] passed

Explanation    a function was invoked with invalid rhdr msg

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NO_PREQ_ENTRY [chars].[dec]: [chars] rp equals [pointer] nptr equals [pointer] from sender equals g:[dec]/n:[dec]/p:[dec]

Explanation    Could not find pending request entry in the pending list.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NRS_DECODE [chars], Datahandle equals [hex], errno equals [dec]

Explanation    An internal NRS function failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NRS_SEARCH [chars]: nrs_search for [chars] failed, rc equals [dec] errno equals [dec]

Explanation    nrs_search failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-QUERY_PEERS_TIMED_OUT TID equals [dec] Could not cmd equals [dec] for GID equals [hex] CHDL equals [hex]([hex]) #to_resp equals [dec] req equals [dec] got equals [dec] state equals [hex], expstate equals [hex] preq_id equals [dec] rds_type equals [dec]

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-READ_FAILED [chars] DH_ENTRY equals [hex] for exp_len equals [dec] got equals [dec] rc equals [dec] errno equals [dec]

Explanation    ens_read API failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-WRONG_PLANE [dec]: Wrong plane [dec] for [chars] failed.

Explanation    ens_bulk_register failed.

Recommended Action    Contact support.

RDSFS Messages

Error Message     
 
    
    
   

%OS-RDSFS-4-BAD_REPLICA Bad Replica detected: Condition-[chars] Path-[chars] Error-[chars].

Explanation    The current instance of RDSFS encountered an error so that it is no longer a replica.

Recommended Action    Contact customer support.

Error Message     
 
    
    
   

%OS-RDSFS-7-DEBUG PID:TID equals [dec]:[dec] [chars] [chars] Error-[chars]

Explanation    RDSFS failure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RDSFS-7-EDM_INTERNAL There was an internal error with the RDSFS EDM: [chars], [hex] ([chars]).

Explanation    RDSFS encountered an internal error within it's EDM, which is a non vital component for normal operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RDSFS-7-FAILURE [chars] [chars] Error-[chars]

Explanation    RDSFS encountered internal error. Error could be either transient or persistent error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Also collect and provide show tech-support rdsfs.

Error Message     
 
    
    
   

%OS-RDSFS-7-INIT_FAILED Failed to initialize [chars] because [chars].

Explanation    RDSFS failed to initialize a module.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

REDFS Messages

Error Message     
 
    
    
   

%OS-REDFS-4-MIRROR_DISABLED Mirroring disabled because [chars].

Explanation    RedFs disabled mirroring because of the specified reason.

Recommended Action    Check mirroring configuration.

Error Message     
 
    
    
   

%OS-REDFS-5-HDD_MIRROR_NOT_START Mirroring unable to start because harddisk device [chars] is not ready due to reason '[chars]'.

Explanation    RedFs indicates that mirror sync process cannot start because the specified harddisk device is not ready for the given reason.

Recommended Action    Verify state of device using 'show media'. If not partitioned, do 'format device partition' to create second partition on specified secondary device. If platform denied then it is not supported by hardware.

Error Message     
 
    
    
   

%OS-REDFS-5-HDD_MIRROR_OVERRIDEN Harddisk Mirroring will now be disabled while in sync state '[chars]' due to local mirroring

Explanation    RedFs indicates that harddisk mirror will stop and local disk mirroring will start.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-REDFS-5-INIT_FAILED Failed to initialize [chars]: [hex]:[chars].

Explanation    RedFs failed to initialize a module.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%OS-REDFS-5-MIRROR_ERROR Mirror [chars] error on [chars]/[chars]. Error-[dec]:[chars].

Explanation    RedFs indicates that mirroring error occured on the operation and file specified with the specified error.

Recommended Action    Check 'show mirror' state and confirm if a re-sync has started or redundancy has been restored. If sync failed or not redundant, contact customer support.

Error Message     
 
    
    
   

%OS-REDFS-5-MIRROR_NOT_REDUNDANT Mirroring is not redundant because [chars]. Only using device [chars] now.

Explanation    RedFs indicates that mirroring state is no longer redundant and is only using the specified device.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-REDFS-5-MIRROR_NOT_START Mirroring unable to start because secondary device [chars] is not partitioned. Please format partition it.

Explanation    RedFs indicates that mirror sync process cannot start because the specified secondary device is not partitioned. It must be partitioned to start mirroring.

Recommended Action    Verify state of secondary device using 'show media'. If not partitioned, do 'format device partition' to create second partition on specified secondary device. If mirroring fails to start sync, contact customer support.

Error Message     
 
    
    
   

%OS-REDFS-5-MIRROR_PAUSED Mirroring has been paused. Please do 'mirror resume' to restart mirroring.

Explanation    RedFs indicates that mirroring has been paused.

Recommended Action    Please use the 'mirror resume' command to restart mirroring if operations which required 'mirror pause' are complete.

Error Message     
 
    
    
   

%OS-REDFS-5-MIRROR_SYNC_FAILED Mirror sync failed on [chars]/[chars]. Error-[dec]:[chars].

Explanation    RedFs indicates that mirror sync process has failed on the specified file and is not able to make disks redundant.

Recommended Action    Restart mirror sync by doing 'mirror pause' and 'mirror resume' on sync failed node. If sync fails again, contact customer support.

Error Message     
 
    
    
   

%OS-REDFS-6-MIRROR_ENABLED Mirroring has been enabled with configured devices of [chars] and [chars].

Explanation    RedFs indicates that mirroring has been enabled with the specified devices.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-REDFS-6-MIRROR_REDUNDANT Mirroring is now fully redundant for devices [chars] and [chars].

Explanation    RedFs indicates that mirroring state is now fully redundant for the specified devices.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-REDFS-6-MIRROR_RESUMED Mirroring has been resumed after being paused.

Explanation    RedFs indicates that mirroring has been resumed after being paused.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%OS-REDFS-6-MIRROR_UPGRADE Mirroring is partitioning device [chars] as part of upgrade procedure.

Explanation    RedFs indicates that it is partitioning the specified device as part of the mirroring upgrade procedure.

Recommended Action    No action is required.

REGEXP Messages

Error Message     
 
    
    
   

%OS-REGEXP-6-ENOMEM % Out of memory

Explanation    *NONE*

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-REGEXP-6-INTERNAL % Internal error

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-REGEXP-6-INVALID % invalid regexp: [chars]

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-REGEXP-6-REGERROR % [chars]

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_AGENT Messages

Error Message     
 
    
    
   

%OS-RSI_AGENT-2-OBJ_CREATE Failed to create required '[chars]' object '[chars]', id equals [hex]: [chars]

Explanation    Failed to internally create an object required to provide service.

Recommended Action    Restart the rsi_agent process.

Error Message     
 
    
    
   

%OS-RSI_AGENT-2-RESOURCE_DOWN Critical resource '[chars]' required to operate was unavailable: [chars]

Explanation    A critical resource required to perform an operation was unavailable.

Recommended Action    Resource Managers: VRF Database: rsi_master Interface Database: ifmgr Please check if the resource managers are running. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-CONSISTENCY_CHECK '[chars]' had a value of '[chars]', which did not match the expected value '[chars]'.

Explanation    A software bug when an internal data consistency check failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-ERR_GENERAL '[chars]' failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-ERR_INIT '[chars]' failed during initialization: [chars]

Explanation    Initialization of a required module failed. The process was unable to continue.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-INTF_MAPPING_CHANGE Unexpected interface name:handle mapping change from [chars]:[hex] to [chars]:[hex].

Explanation    An interface handle was received which does not match the interface handle already in the database.

Recommended Action    Restart the rsi_agent process.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-NONRESPONSIVE_CLIENT Client '[chars]' has not processed an update [dec] seconds after being notified. Forcing reconnect. PID equals [dec],

Explanation    RSI is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.

Recommended Action    Collect 'show processes pidin location loc-name' to find out the unresponsive client. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_MASTER Messages

Error Message     
 
    
    
   

%OS-RSI_MASTER-2-ERR_INVALID_THREAD Callback from ENS on incorrect thread, actual/expected equals [dec]/[dec]

Explanation    Detected single-threaded RSI Master code running on an unknown thread. This concurrency can result in corruption. %d/%d indicate actual tid/expected tid.

Recommended Action    Collect RSI traces

Error Message     
 
    
    
   

%OS-RSI_MASTER-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating

Explanation    RSI Master terminated due to lack of memory for a critical operation.

Recommended Action    It is detected that the system is running under very low memory condition. Collect RSI traces and restart rsi_master process

Error Message     
 
    
    
   

%OS-RSI_MASTER-3-ERR_GENERAL '[chars]' failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_MASTER-3-ERR_GENERAL_NO_RC [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSVDPMEM Messages

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-BAD_DATAFILE_VALUES Values from [chars] are invalid. data equals [chars]. start equals [dec], end equals [dec].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-BAD_RETURN_VALUES Did not set return values correctly. start equals [dec], size equals [dec], base_addr equals [hex], mem_size equals [dec], mem_physical_start equals [hex], mem_physical_size equals [dec].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-INVALID_PARAMS --

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-MEMUTIL_FIND_FAIL memutil_find_reserved_mem returned invalid memory reservation - mem_physical_start equals [hex], mem_physical_size equals [hex].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-NO_MATCHING_STRING Failed to find any line in [chars] containing string: [chars]

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-OPEN_FAIL Open of [chars] failed. Error [chars]

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-SSCANF_FAIL sscanf function failed to match required number of parameters. Matched [dec], error: [chars]. data equals [chars].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RT_CHECK_LIB Messages

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-EVENT_MANAGER event manager function [chars] failed: [chars]

Explanation    A call to an event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_CONN [chars]: error connecting with Group Services: [chars]

Explanation    A call to group_join() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_LOOKUP [chars]: error group lookup with Group Services: [chars]

Explanation    A call to group_lookup() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_NOTIFY [chars]: error group set notify with Group Services: [chars]

Explanation    A call to group_set_notify() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_SEND [chars]: error sending with Group Services: [chars]

Explanation    A call to group_send() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-MGD_TIMER mgd timer function [chars] failed

Explanation    A call to a mgd timer interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-PTHREAD Pthread operation [chars] [hex] failed: [chars]

Explanation    A pthread operation failed

Recommended Action    Contact support.

RT_CHECK Messages

Error Message     
 
    
    
   

%OS-RT_CHECK-3-BCDL_REQ BCDL [chars] request failure, error [dec]: [chars]

Explanation    A call to a BCDL interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-CHAN_CONN [chars] msg chan connect failed: [chars], error [dec]: [chars]

Explanation    A call to a LWM API failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_ENCODE_FAILED Failed to encode [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_LIST_ADD_FAILED Failed to add to an external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_LIST_CREATE_FAILED Failed to create external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_REGISTER_FAILED Failed to register its external data manager: [chars]

Explanation    The process failed when attempting to register its external data manager with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EVENT_MANAGER event manager function [chars] failed: [chars]

Explanation    A call to an event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-GROUP group services function [chars] failed, error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-MEMORY Memory allocation error.

Explanation    --

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-MGD_TIMER mgd timer function [chars] failed

Explanation    A call to a mgd timer interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-PTHREAD pthread function [chars] failed

Explanation    A call to a pthread interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-PTHREAD_MUTEX Pthread operation [chars] [hex] failed: [chars]

Explanation    The mutex lock/unlock failed

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_INIT Failed to initialize RSI client library: [chars]

Explanation    Failed to initialize RSI global client library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_TBL_ID Failed to get RSI tbl id from vrf name: [chars]

Explanation    The RSI failed to translate a vrf name into a tbl id.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_VRF_NAME Failed to get RSI vrf name from tbl id: [chars]

Explanation    The RSI failed to translate a tbl id to a vrf name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-SYSDB [chars]

Explanation    A call to a sysdb interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-SYSMGR SYSMGR for function: [chars], gave [chars] error

Explanation    SYSMGR failed to reply.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-TIMER_INIT timer init failed

Explanation    A call to the rt_check timer init routine failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-USAGE usage: [chars] [-m] [-u] [-M] [-U]

Explanation    Incorrect command line arguments were given to the module

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-6-EDM_BAG_REGISTRATION_FAILED Failed to register its external data manager data blocks: [chars]

Explanation    The process failed while attempting to register its external data manager data blocks with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SEIPC Messages

Error Message     
 
    
    
   

%OS-SEIPC-3-DEBUG_ERROR [chars]: [chars]

Explanation    Encountered an error in debug module. This error should not impact the major functionality of the module.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SEIPC-3-INIT_CRITICAL_ERROR [chars]: [chars], [chars]

Explanation    A critical error during the initialization of Service Engine IPC. The cause of the error will be mentioned in the message displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SEIPC-3-LTRACE_ERROR Error encountered tracing for [chars]: [chars]

Explanation    Error message from tracing module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SEIPC-3-RECV_BUF_ERROR [chars]: Limited size of receive buffer [dec]

Explanation    The size of receive buffer is less than the required size. This will cause degraded performance in SEIPC calls.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN_SVR Messages

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-EVM_ERROR [chars], Error: [chars]

Explanation    Failed in some event management functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-GLOBAL_MUTEX_ERR [chars] ([dec], [chars])

Explanation    Mutex lock/unlock failure has occurred for shmwins open/close operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-INVALID_ID Invalid window ID or group ID ([dec], [dec])

Explanation    Window ID or Group ID specified by client is invalid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-LWM_ERROR [chars], Error: [chars]

Explanation    Failed to execute some LWM library functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MAIN_INIT Initialization in main failed, Error: [chars]

Explanation    One of the functions called during initialization of the process failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MMAP_FAIL Failed to mmap [chars]

Explanation    mmap of the shared memory required to store servers tree nodes failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MSG_ERROR Received a bad message, [chars]

Explanation    The message received by the server had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-NO_MEMORY Failed in allocating memory

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-NOVMEM Exhausted virtual memory, top [dec] consumer, [chars]: [unsigned int] KBytes

Explanation    Not enough memory available for shared memory window in the system. Top shared memory window users will be display on the console.

Recommended Action    If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-PLATFORM_FILE [chars], Error: [chars]

Explanation    Problem opening/reading from the platform shmwin file.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-QSM_ERROR Failed to publish QSM namespace, [chars]

Explanation    The server failed in advertising its namespace through QSM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SHM_ERROR [chars] [chars], Error: [chars]

Explanation    There was a problem with the shared memory file allocation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SHMWIN_SIZE [chars] area's size [dec] is smaller than [dec](shmwin header size)

Explanation    Opened shmwin size is smaller the shmwin header size.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SVR_ERR [chars]

Explanation    An error has occurred in a server operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-WINDOW_MUTEX_ERR [chars] window:[chars] ([dec], [chars])

Explanation    Mutex lock/unlock failure has occurred for a shmwin open/close operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-6-SHARED_MUTEX_REVIVED The shmwin control mutex was revived by shmwin_svr

Explanation    A participant process crashed while holding the shared shmwin control mutex and the shmwin_svr revived the mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN Messages

Error Message     
 
    
    
   

%OS-SHMWIN-2-ERROR_ENCOUNTERED SHMWIN: Error encountered: [chars]

Explanation    SHMWIN hit an error, which is described by the description printed. This error indicates that the shared memory window library detected a service internal error condition. This does not mean a service impacting condition.

Recommended Action    If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx

Error Message     
 
    
    
   

%OS-SHMWIN-2-SHARED_PAGE_ERROR SHMWIN: Shared page related error encountered: [chars] : failed with [chars]

Explanation    SHMWIN hit an error related to the shared page. This error indicates that the shared memory window library detected a service internal error condition. This does not mean a service impacting condition.

Recommended Action    If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - sho