Cisco IOS XR System Error Message Reference Guide, Release 4.0
Layer 3 Messages
Downloads: This chapterpdf (PDF - 341.0KB) The complete bookPDF (PDF - 53.73MB) | Feedback

Layer 3 Messages

Table Of Contents

Layer 3 Messages

IPHC_MA Messages

IPHC_PROFILE Messages

IPV6_ND_LITE Messages


Layer 3 Messages


This section contains all Layer 3 related System Error Messages.

IPHC_MA Messages

Error Message     
 
    
    
   

%L3-IPHC_MA-2-FAIL Failed to [chars] ([chars]) [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-3-DPC_ERROR [chars] [hex] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-3-ERROR [chars] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L3-IPHC_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars]

Explanation    IPHC MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*.

Error Message     
 
    
    
   

%L3-IPHC_MA-6-INFO [chars] [chars]

Explanation    printing the iphc ma info.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_MA-6-SENDTO Packet send attempt timed out: [chars]

Explanation    The socket call to send a control packet timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPHC_PROFILE Messages

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-2-FAIL IPHC PROFILE MANAGER failed to [chars]. [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-3-ERROR [chars] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-6-INFO [chars] [chars] [dec]

Explanation    printing the iphc profile info.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPHC_PROFILE-6-SENDTO Packet send attempt timed out: [chars]

Explanation    The socket call to send a control packet timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ND_LITE Messages

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_ASYNC_SEND_FAIL Send async pulse to ipv6 nd lite process fails; Error [chars]

Explanation    Attempt to send pulse to IPV6 ND lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_CHAN_CONNECT_FAIL Cannot connect to ipv6 nd lite process; Error [chars]

Explanation    Attempt to connect to ipv6 nd lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SELF_GENERATE IPV6 ND Lite self generated fun: [chars]: line: [dec]

Explanation    Attempt to munmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_CACHED_DATA_FAIL Invalid cached shmem addr [hex]; fd [dec]

Explanation    Attempt to get cached shared memory info fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_GIP_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] global IP records (request for [dec] records [dec] )

Explanation    IPV6 ND has requested transfer of more global IP records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_MUNMAP_FAIL Cannot munmap file [chars]; Error [chars]

Explanation    Attempt to munmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] records (request for [dec] records [dec] )

Explanation    IPV6 ND has requested transfer of more interface records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L3-IPV6_ND_LITE-3-ERR_SHMEM_UNLINK_FAIL Cannot unlink file [chars]; Error [chars]

Explanation    Attempt to unlink the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Recommended Action