Cisco IOS XR System Error Message Reference Guide, Release 4.0
Layer 2 Messages
Downloads: This chapterpdf (PDF - 2.68MB) The complete bookPDF (PDF - 53.73MB) | Feedback

Layer 2 Messages

Table Of Contents

Layer 2 Messages

10GE_PLIM Messages

ACCT_SVR Messages

ALPHA_TCAM Messages

ALPHA Messages

ASIC_ERRORS Messages

ASIC_SCAN_EXEC Messages

ASIC_SCAN_SERVER Messages

ATM_ILMI Messages

ATM_INARP Messages

ATM_NETIO Messages

ATM_OAM Messages

ATM_RM Messages

ATM_SAAR Messages

ATM_SOCKET Messages

ATM_SOP Messages

ATM_VCM Messages

atmdrv Messages

ATMGCMGR Messages

BFD Messages

BGP_AD Messages

BM_PD Messages

BM Messages

C_SHIM_PARTNER Messages

C12000_FR Messages

CCL Messages

CDP Messages

CEMA Messages

CFM Messages

CFMMIB Messages

CHDLC_EA Messages

CHDLC_MA Messages

CHDLCDLL Messages

CHIPs Messages

CHNLZD_EFCM Messages

COMMS Messages

CPP_EXMEM Messages

cpp_sbs Messages

CPP_TCAM_RM Messages

CPPHA Messages

cpposlib Messages

d1qnetio Messages

DIV2_DM Messages

DRIVERS_UTIL Messages

DWDM Messages

E3EGRESSQ Messages

E3INGRESSQ Messages

E5EGRESSQ Messages

E5INGRESSQ Messages

edge_l2fwd_rewrite Messages

edge_l2fwd_table Messages

EGRESSQ_HW_DLL Messages

EGRESSQ Messages

ELO_COMMON Messages

ELO Messages

ELOGM Messages

EMA Messages

EPI Messages

ESPI Messages

eth_gl Messages

ETH_OUTPUT Messages

ETHER_NETIO Messages

ether_spa_intr Messages

ether_spa_mac_error Messages

ether_spa_plugin Messages

ETHER Messages

ETHERNET Messages

FB_PLIM Messages

FB_SHIM_ENCAP Messages

FIB_IPV4 Messages

FIB_IPV6 Messages

FIB_MPLS Messages

FR_EDM Messages

FR_INARP Messages

FR_LMI Messages

FR_NETIO Messages

FR_SFRAR Messages

FR_SOCKET Messages

FR_UV Messages

FR_VCM_EA Messages

FR_VCM Messages

FRMIB Messages

FSYNC Messages

FWD_EDGE_COMMON Messages

G709 Messages

GATM Messages

GDO Messages

GE_ASIC_PRP3 Messages

GE_ASIC Messages

GE Messages

GSR_aib Messages

GSR_edge_fwd_lib Messages

GSR Messages

GT64115 Messages

gulf Messages

HALE_MQS Messages

HALE_QOS Messages

HALE_REPLICORD Messages

HALE_TCAM Messages

HALE_TLU Messages

HFA_COMMON Messages

HFA_LIB Messages

if_discovery Messages

IGMPSN_POLICY Messages

IGMPSN Messages

IOB Messages

IPV6_EA Messages

IXP2800_FWD Messages

IXP2800_HW Messages

IXP2800_SERVICE Messages

JACKET Messages

JDAM Messages

L2C Messages

L2FIB_DEBUG Messages

L2FIB_LIB Messages

L2FIB_SHM Messages

L2FIB Messages

L2TP Messages

L2VPN_DEBUG Messages

L2VPN_PW Messages

L2VPN Messages

LACP_LITE Messages

LC Messages

MARVEL Messages

METRO_STATS_API Messages

METRO_STATS Messages

MFR_EA_LTRACE_DLL Messages

MFR_EA_LTRACE Messages

MFR_EA Messages

MFR_MA Messages

MICKEY Messages

MLCTRLR Messages

MMSMLIB Messages

MOTHRA Messages

MOUSE Messages

MRP_MAD Messages

MULTILINK_UV Messages

Multilink Messages

MVRP Messages

ND Messages

OAMMIB Messages

OC768_FRAMER_ASIC Messages

OPTICS Messages

PAL_CGM Messages

PAL_IPHC Messages

PFILTER_EA Messages

PLAOC768_API Messages

PLAOC768 Messages

PLATFORM_ATM_OAM Messages

plim_4p_oc12 Messages

PLIM_4P_OC192 Messages

PLIM_ASIC_API Messages

PLIM_ASIC Messages

PLIM_CLKSEL Messages

PLIM_ETHER Messages

PLIM_FPGA Messages

PLIM_IOX_4P_GE Messages

PLIM_LIB Messages

plim_oc48 Messages

PLIM_OC768 Messages

PLIM Messages

pm5315 Messages

pm5316 Messages

PM622 Messages

PMSAR Messages

POS Messages

PPP_EA Messages

PPP_FSM Messages

PPP_GBL_CFG Messages

PPP_LCP Messages

PPP_lite Messages

PPP_MA Messages

PPP_NETIO Messages

PPP_SOCK Messages

PPPOE_EA Messages

PPPOE_GBL_CFG Messages

PPPOE_MA Messages

PRECAM Messages

PSE_UIDB Messages

PSE Messages

PSELIB Messages

QFP_ACL_EA Messages

QFP_BQS Messages

QFP_DRIVER Messages

QFP_EXMEM Messages

QFP_FM Messages

QFP_IFM Messages

QFP_LPTS_EA Messages

QFP_MDM Messages

QFP_PFILTER_EA Messages

QFP_SBS Messages

QFP_TCAM_RM Messages

QFP_UIDB Messages

QFP_XCONNECT Messages

QM_E5 Messages

QM Messages

QUEUEING Messages

RSMLIB Messages

Serial Messages

SLARP_LITE Messages

SLOGIC Messages

SONET_APS Messages

SONET_LOCAL Messages

SPA_192 Messages

SPA_ATM_V2 Messages

SPA_C_SHIM Messages

SPA_CHIN Messages

SPA_CHOC_DSX Messages

SPA_ETHER Messages

SPA_FPD Messages

SPA_OC3_OC12 Messages

SPA_OC48 Messages

SPA_PLIM_SB Messages

SPA_T3E3 Messages

SPA Messages

SPABRG_384 Messages

SPABRG Messages

SPAMSG Messages

SPAN Messages

SPU_LIB Messages

SPU Messages

SRP Messages

SSRP Messages

STP_IO Messages

STP_LIB Messages

STP Messages

STREE Messages

T1E1_LNM Messages

T1E1 Messages

T3E3 Messages

TCAM_RM_CARVE_VERIFY Messages

TCAM_RM Messages

UDLD Messages

UIDB_RM Messages

VCM_EA Messages

VCM Messages

vlan_netio Messages

vlea Messages

vlma Messages

VPA_1P_OC192 Messages

VPA_8P_GE Messages

VPA_RULES Messages

VPLS Messages

WAHOO Messages

WAN_INARP Messages

WAN_LIB_IFDB Messages

WAN_LIB_VCC Messages

WANPHY Messages

XCONNECT Messages


Layer 2 Messages


This section contains all Layer 2 related System Error Messages, including Ethernet drivers, Packet-over-Sonet (PoS), SONET, PLIMS, and so forth.

10GE_PLIM Messages

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_FAULT Interface [chars], Detected RX Fault

Explanation    The PLIM received an Rx fault on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_UNKNOWN Interface [chars], Detected PLA Fault

Explanation    The PLIM PLA ASIC had an unknown fault on the given interface which will result in a link flap.

Recommended Action    Suggest running diags to determine which part of the Rx path is broken and potentially RMA to replace the bad hardware.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-STARTUP PLIM Process Error: [chars]

Explanation    The PLIM process failed to spawn correctly.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-UNSUP This PLIM is no longer supported

Explanation    This PLIM is a prototype and is not longer supported

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-XGXS_RX_SYNC An XGXS RX lane failed to synchronize for port [dec].

Explanation    The XGXS Rx Lanes failed to synchronize after a Xenpak OIR or Link Flap.

Recommended Action    Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-XGXS_TX_SYNC An XGXS TX lane failed to synchronize for port [dec].

Explanation    The XGXS Tx Lanes failed to synchronize after a Xenpak OIR or Link Flap.

Recommended Action    Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-3-FAULTY_XFP Port [dec], XFP unable to reach ready state, powering off

Explanation    The XFP inserted encountered a fault condition when powering on.

Recommended Action    Verify the XFP is supported in the hardware manuals and is inserted correctly.

Error Message     
 
    
    
   

%L2-10GE_PLIM-3-OIM_ERR An Optic Interface Module error occurred at port [dec], reason : [chars]

Explanation    A fatal error occurred in 10GE PLIM driver OIM rule validation.

Recommended Action    1. Remove the Xenpak and check if it is Cisco qualified Xenpak. 2. If it is Cisco qualified Xenpak, check DWDM Xenpak placement rule.

Error Message     
 
    
    
   

%L2-10GE_PLIM-4-INVALID_MAC Failed to get MAC address for Slot [dec], Port [dec], Interface assigned random MAC address.

Explanation    PLIM driver was unable to get a MAC address for the interface.

Recommended Action    Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-4-RX_LOSS Interface [chars], Detected RX Loss of Signal

Explanation    The PLIM received an Rx LOS or LF on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-4-RX_RF Interface [chars], Detected Remote Fault

Explanation    The PLIM received a remote fault on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-ERR_UPGRADE [chars]

Explanation    This is a Informational message in the plim_8p_10ge driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-OIM_OIR Optic Interface Module [chars] for port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port has either been inserted or removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-UNSUPPORTED_XFP Port [dec], Unsupported XFP inserted

Explanation    The XFP inserted in the given interface is not supported on this PLIM.

Recommended Action    Verify the XFP is supported in the hardware manuals

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-XFP_OIR Optic Interface Module [chars] for port [dec]

Explanation    The Optic Interface Module (XFP) for the specified port has either been inserted or removed.

Recommended Action    No action is required.

ACCT_SVR Messages

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INIT init error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered a software error while initializing. The process is exiting and will be restarted. System will not be affected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INIT init error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered a software error while initializing. The process is exiting and will be restarted. System will not be affected.

Recommended Action    The process will be restarted automatically to recover.

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INTERNAL software internal error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered an internal error. The process is exiting and will be restarted. System will not be affected.

Recommended Action    The process acct_svr will automatically be restarted to recover.

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INTERNAL software internal error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered an internal error. The process is exiting and will be restarted. System will not be affected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-4-HFA_CLK_DELTA_FAIL HFA get clock delta has failed consecutively [dec] out of [dec] total times.

Explanation    The process acct_svr has failed to get the HFA clock delta for the given consecutive times. This log is printed out after so many consecutive failures to retrieve the clock delta, which may lead to skewed timestamps in the flow report.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-4-HFA_CLK_DELTA_FAIL HFA get clock delta has failed consecutively [dec] out of [dec] total times.

Explanation    The process acct_svr has failed to get the HFA clock delta for the given consecutive times. The flow report uses the forwarding asic clock which may be slightly off from the system clock. To correct the timestamp, the HFA clock delta is retrieve and on failure, the previously recorded delta is used. This log is printed out after so many consecutive failures to retrieve the clock delta, which may lead to skewed timestamps in the flow report.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-7-ISR_FIFO_USAGE_FLAG ISR FIFO ring buffer usage is [chars] threshold ([dec]). direction: [dec] num_items equals [dec]

Explanation    The process acct_svr detected the condition of ISR FIFO ring buffer usage above or below the threshold. If the usage is above the threshold, the process acct_svr will bring the ISR FIFO ring buffer usage back to below the threshold after a while. Traffic will not be affected by this condition.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-7-ISR_FIFO_USAGE_FLAG ISR FIFO ring buffer usage is [chars] threshold ([dec]). direction: [dec] num_items equals [dec]

Explanation    The process acct_svr detected the condition of ISR FIFO ring buffer usage above or below the threshold. If the usage is above the threshold, the process acct_svr will bring the ISR FIFO ring buffer usage back to below the threshold after a while. Traffic will not be affected by this condition.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ALPHA_TCAM Messages

Error Message     
 
    
    
   

%L2-ALPHA_TCAM-3-ERROR_MSG
[chars], rc equals [hex], [chars]

Explanation    This is a error message in the HFA Alpha driver to indicate tcam carving error.

Recommended Action    Reload of LC will be workaround. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ALPHA Messages

Error Message     
 
    
    
   

%L2-ALPHA-3-ERR_ACCESS Memory access error: [chars]: Err equals [chars]

Explanation    A memory access error occurred in programmable switching engine (PSE) driver which involves exiting the process. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ALPHA-3-ERROR_MSG
[chars] [chars]: [hex] [hex]

Explanation    This is a error message in the HFA Alpha driver to indicate either anomalies which are not service impacting. Some of the messages may indicate a failure to allocate resources needed by applications. This error may occur during the error recovery mechanism for programmable switching engine (PSE) while HFA Alpha driver fixes the parity errors in the memories after restart of the PSE.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ALPHA-6-VERSION_WARNING [chars] [chars] error [hex]

Explanation    This is an informational message in the programmable switching Engine driver to indicate unsupported version of programmable Switching engine (PSE) for some features. %s - is the warning message. %s - is the decoded warning reason. %x - is the decoded error code.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%L2-ALPHA-7-INFO_MSG [chars] [chars]

Explanation    This is an informational message in the programmable switching Engine driver to indicate an operation. %s - indicates the direction of the PSE. %s - is the decoded informational reason.

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%L2-ALPHA-7-PHB_DUMP
[hex]: [hex] [hex] [hex] [hex]

Explanation    This is a debug message to display PHB dump of programmable switching engine (PSE).

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%L2-ALPHA-7-REG_DUMP
[chars]
cpu_int [hex] cpu_mask_int_reg [hex] error_addr_reg [hex]
error_data_hi_reg [hex] error_data_lo_reg [hex] error_parity_reg [hex]
fs_error_reg [hex] pf_err_reg [hex] prep_int_status_reg [hex]
prep_pc_reg [hex] pc1_status_reg [hex] plu_int_reg [hex]
plu_int_en_reg [hex] plu_err_en_reg [hex] plu_ecc_error_reg [hex]
plu_ecc_syndrome_reg [hex] tlu_int_reg [hex] tlu_sdram_adr_err_reg [hex]
tlu_sdram_ecc_syndrome_reg [hex] mip_int_status_reg [hex] mip_pc_reg [hex]
pc2_status_reg [hex] pst_status_reg [hex] cam_status_reg [hex]
nf_stat_reg [hex] pop_int_status_reg [hex] pop_pc_reg [hex]
ssram_adr_err_reg [hex] ssram_err_data_reg [hex] pl_pipeline_ctl_reg [hex]
pl_aa_pak_avl_1_reg [hex] pl_aa_end_reg [hex] pl_aa_fatal_err_reg [hex]
gather_int_stat_reg [hex] xbm_read_status_reg [hex] xbm_rcl_w_status_1_reg [hex]
xbm_rcl_w_status_2_reg [hex] xbm_rcl_r_status_reg [hex] xbm_tail_w_status_1_reg [hex]
xbm_tail_w_status_2_reg [hex] xbm_tail_w_status_reg [hex] xbm_control_status_1_reg [hex]
xbm_control_status_2_reg [hex] fs_pcr_reg [hex] prep_pair_reg[0] [hex]
plu_pcr_reg [hex] pc1_pcr_reg [hex] tlu_pcr_reg [hex]
dummy_pcr_reg [hex] mip_pair_reg[0] [hex] pc2_pcr_reg [hex]
cam_match_pcr_reg [hex] pst_pcr_reg [hex] pop_pair_reg[0] [hex] gather_pcr_reg[hex]

Explanation    This is a debug message to display registers of programmable switching engine (PSE).

Recommended Action    Debug message only. No action is required.

ASIC_ERRORS Messages

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notification handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notification handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notification handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

ASIC_SCAN_EXEC Messages

Error Message     
 
    
    
   

%L2-ASIC_SCAN_EXEC-2-START [chars]: Scan in progress... Please wait for completion mesaage

Explanation    This is informational message indicating that the ASIC SCAN is started from CLI.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ASIC_SCAN_SERVER Messages

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-2-EXIT ASIC Scan Server exits after a successful scan

Explanation    ASIC scan server exits, expected behavior.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-2-NODE_BRINGDOWN [chars]

Explanation    This is a message in the Asic Scan Server to indicate that it has triggered a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan operation is reported.

Recommended Action    Run the board diagnostics.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_EVM_CREATE ASIC Scan Server failed to create the event manager: Reason equals [chars].

Explanation    ASIC scan server has failed to create the event manager. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_GET_CARD_TYPE ASIC Scan Server failed to get the card type: Reason equals [chars].

Explanation    ASIC scan server has failed to get the card type. This would result in termination of the server process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_INIT ASIC Scan Server encountered error [[chars]]: Reason equals [chars].

Explanation    ASIC scan server has failed the initialization sequence due to the specified reason. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_IO ASIC Scan Server failed to [chars]: Reason equals [chars].

Explanation    ASIC scan server has failed the specified io operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_ILMI Messages

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-IM_ERR [chars] : [chars]

Explanation    Error in IM(Interface Manager) operation first %s - Type of the failure second %s - Interface/PVC which failed the lookup This error happens on an LC with ATM interfaces

Recommended Action    Check if the interface or pvc exists and retry the operation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error. first %s - Type of failure second %s - reason for failure

Recommended Action    Action to be taken based on the error message. In case of initialization/registration failures. Restart the atm_ilmi process for recovering Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation. The datatype sent by sysdb is invalid with regard to atm_ilmi %s - invalid datatype that we received

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. process restart of atm_ilmi. If that does not recover spa/plim reload.

ATM_INARP Messages

Error Message     
 
    
    
   

%L2-ATM_INARP-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_INARP-2-NOMEM Operation failed due to memory shortage, function: [chars]

Explanation    Memory on the box is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_NETIO Messages

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-CARD_DLL Failed to open card specific dll [chars]

Explanation    Card specific dll may not be present

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INSERT_DICT Insertion to ATM Netio Dictionary fails

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INVALID_DLL DLL not found for the specified card : [chars]

Explanation    Check the installation Dlls missing from package

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-LOAD_PATH Failed to get load path env variable for dll [chars]

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The DLL has failed to acquire the required amount of memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSE_FAILURE Failed to parse atm_netio.rules at line: [chars]

Explanation    The file atm_netio.rules has been modified and parsing fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSER_NULL_PATH --

Explanation    The path to atm_netio.rules file cannot be located.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_OAM Messages

Error Message     
 
    
    
   

%L2-ATM_OAM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM(Interface Manager) operation %s - Type of error %s - reason for the error This error happens on the LC with ATM interfaces

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. restart the atm_oam process.

Error Message     
 
    
    
   

%L2-ATM_OAM-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error. %s - Failure %s - ifhandle/interface_name/function name This happens on the LC with ATM interfaces

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. atm_oam is not the owner of anything. Process restart of atm_oam will recover the issue

Error Message     
 
    
    
   

%L2-ATM_OAM-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation. %s - Type of the error. This error happens on the LC with ATM interfaces

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error in the config that is being committed. Check the configuration and change it according to the error.

ATM_RM Messages

Error Message     
 
    
    
   

%L2-ATM_RM-1-SYSDB_ERR [chars] : [chars]

Explanation    Error in sysdb operation. Error while setting the value in sysdb. first %s - type of the error second %s - reason of the error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. retry the commit operation of the failed tuple based on the error message

Error Message     
 
    
    
   

%L2-ATM_RM-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed. first %s - type of error second %s - reason for the error

Recommended Action    Restart the atm_vcm process. Initialization failure will lead to lot of other errors. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_RM-2-NOMEM Failed to allocate [dec] bytes due to memory shortage

Explanation    Memory on the router is critically low. %d - amount of memory that is tried to be allocated

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. LC reload alone can recover from this situation. All info to be collected before the reload.

Error Message     
 
    
    
   

%L2-ATM_RM-4-BANDWIDTH_ERR [chars] : Bandwidth available [unsigned int] : Failed to reserve [unsigned int]

Explanation    Insufficient bandwidth available. possible cause: Too many vc's inheriting QoS from class parameters %s - gives the name of the interface %u - gives the available bandwidth size %u - gives the bandwidth that failed to apply

Recommended Action    Check vc class configuration on interface If there are vcs you want specific QoS values for under the main interface, try configuring QoS on these vcs before applying class to the interface in order to stop unwanted inheritance. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_SAAR Messages

Error Message     
 
    
    
   

%L2-ATM_SAAR-2-INIT Failed to initialize ATM SAAR: [chars] ([chars])

Explanation    There was an error initializing the ATM SAAR component.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SAAR-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_SOCKET Messages

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed. first %s - type of failure second %s - reason for the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the error is during the initialization, restart the process. For memory related errors, reload the LC.

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-NOMEM Allocation of [dec] bytes failed due to memory shortage

Explanation    Memory on the router is critically low. %d - amount of memory that was tried to be allocated.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. LC reload alone will recover the situation. All information to be collected before the reload

Error Message     
 
    
    
   

%L2-ATM_SOCKET-3-RESMGR_ATTACH Failed to setup atm socket as a resource manager: [chars]

Explanation    The atm_io process failed to advertise itself to the system as a resource manager. %s - reason for failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. restart the atm_socket process.

ATM_SOP Messages

Error Message     
 
    
    
   

%L2-ATM_SOP-3-INTR ATM SOP Intr: [chars]: [dec]: [chars]: [dec] [chars]

Explanation    The SOP FPGA has been interrupted due a hardware error %s - Error message %d - Interrupt %s - Data1 %s - Data2 %s - Data3

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SOP-7-DEBUG ATM SOP DEBUG: [chars]: [hex]: [hex]: [hex]

Explanation    ATM SOP debug message %s - Debug message %lx - Asic %x - Data1 %x - Data2

Recommended Action    No action is required.

ATM_VCM Messages

Error Message     
 
    
    
   

%L2-ATM_VCM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM(Interface Manager) operation first %s - Failure second %s - reason for the failure This happens on the LC with ATM interfaces

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Either caps addition or removal failed. Depending on the failure, reapply the configuration.

Error Message     
 
    
    
   

%L2-ATM_VCM-2-INTERNAL_ERR [chars] : [chars] : [chars]

Explanation    Internal error. Type of error and reason will be there in the msg %s - ifhandle/ name of errored interface %s - Type of the error occurred %s - Reason for the error This happens on the LC with ATM interfaces

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Most of the errors are because of low memory. Others are not very critical. LC reload will resolve the low memory condition. Information to be collected before the reload

Error Message     
 
    
    
   

%L2-ATM_VCM-2-SYSDB_ERR [chars]

Explanation    Error in initialization of verification functions with Sysdb or the registration of the debug %s - reason for the error. This error happens on the LC with ATM interfaces

Recommended Action    Restart the atm_vcm process to recover Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

atmdrv Messages

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR error, reason:[chars]

Explanation    GSR SPA Driver encountered an error while bringing up the SPA devices. %s - Error message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR [chars], [dec] error, reason:[chars]

Explanation    PLIM Drivers for the ATM have encountered an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_ENCAP [chars] - [dec]: [chars] rc equals [hex] connid equals [dec] key equals [hex]

Explanation    atmdrv error occurred while updating the canonical header for a connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_STS [chars] (rc equals [hex])

Explanation    GSR SPA Driver encountered an error while initializing the SPA device. %s - Error message %x - Error Code

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_STS [chars] - [dec]: [chars] (rc equals [hex])

Explanation    atmdrv error occurred when initializing any of the devices in E3 ATM card or while programming a VC.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_VC [chars] - [dec]: [chars] (connid equals [dec])

Explanation    atmdrv error occurred when trying to add, modify or delete a VC. The error can be returned from the SAR or the CPK Asic.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-3-cpk_err [chars]. Port [dec]: number of occurrence equals [unsigned int] intr_status equals [hex]

Explanation    atmdrv cpk24 interrupt handling related errors, or alerts

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-4-warning [chars], [dec] warning, reason:[chars]

Explanation    atmdrv warning message while working with a wred profile

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, and mail this message to your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-7-db_dump reason:[chars] port:[dec], vpi/vci:[dec]/[dec], connid:[dec], channels(r/s):[hex]/[hex], shape:[dec], encap:[dec]

Explanation    atmdrv debug message

Recommended Action    None

ATMGCMGR Messages

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-DBG_INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the debug events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BFD Messages

Error Message     
 
    
    
   

%L2-BFD-3-CHANGE_ECHO_SOURCE_ADDRESS_FAILED BFD session to neighbor [chars] on interface [chars] has failed to update echo source address to [chars].

Explanation    Failed to change echo source address and construct echo packet hdr for BFD session.

Recommended Action    Recreate the BFD session and reconfigure echo source address for it.

Error Message     
 
    
    
   

%L2-BFD-3-PROT_BFD_SESSION_DOWN_MESSAGE_LOST One or more PROT_BFD_SESSION_DOWN event(s) has been lost due to lack of protect server initialization

Explanation    One or more PROT_BFD_SESSION_DOWN PFI fast protect event has been lost. If a link which BFD session failed happened to be fast-reroute protected, fast-reroute may not have been triggered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BFD-3-PROT_SERVER_INIT_FAILURE Failed to initialize protect server with error '[chars]'

Explanation    BFD could not initialize itself as PFI fast protect server, PROT_SERVER_BFD, since PFI fast protect infrastructure returned failure. BFD will continuously retry initialization in the background until successful. However, until successfully initialized, BFD session failure can not generate PFI fast protect event for PROT_BFD_SESSION_DOWN, which may prevent fast-reroute from being triggered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BFD-3-REVERT_ECHO_SOURCE_ADDRESS_FAILED BFD session to neighbor [chars] on interface [chars] has failed to revert echo source address to [chars].

Explanation    Failed to revert echo source and construct echo packet hdr for BFD session.

Recommended Action    Recreate the BFD session and reconfigure echo source address for it.

Error Message     
 
    
    
   

%L2-BFD-3-REVERT_ECHO_SOURCE_ADDRESS_SUCCESS BFD session to neighbor [chars] on interface [chars] has reverted echo source address to [chars].

Explanation    Revert echo source and construct echo packet hdr for BFD session successfully.

Recommended Action    Recreate the BFD session and reconfigure echo source address for it.

Error Message     
 
    
    
   

%L2-BFD-4-ASYNC_DETECT_TIMER_FAULTY_EXPIRY BFD Async Detect timer expired for neighbor [chars] interface [chars] even when async pkt received within timer duration, timer_duration equals [unsigned int] ms, [unsigned int] ms elapsed since last async pkt received

Explanation    BFD Async Detect timer expired even when async pkt received within timer duration, timer_duration

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_HIGH_WATERMARK BFD PPS allocation exceeds 90 percent of maximum.

Explanation    BFD has allocated 90 percent of its packet per second allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_LOW_WATERMARK BFD PPS allocation now less 85 percent of maximum.

Explanation    BFD has released some of the previously allocated packet per second usage and is now at less than 85 percent of its allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RESOURCE_LEAK BFD has detected resource leak in [chars] area(s)

Explanation    BFD was not able to free certain resources, such as allocated memory, discriminator or checkpoint object, due to infrastructure API returning error from free/deletion operation(s). BFD should be able to continue processing by allocating new resources. However, support personnel should be contacted to investigate the cause of resource leak.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BFD-6-ADJACENCY_DELETE Adjacency for neighbor [chars] on interface [chars] was deleted

Explanation    The adjacency for neighbor ip address was deleted.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-FIB_NOT_READY Forwarding is not ready for neighbor [chars] on interface [chars]

Explanation    The forwarding for session is not ready.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-MAX_AGENT_SESSIONS_EXCEEDED Number of requested sessions has exceeded limit [dec]

Explanation    Each linecard is only able to host specific number of BFD sessions. This message indicates that maximum number of hosting BFD sessions has reached its maximum. Those session creating requests after reaching this limit will purposely be prevented from being created. These prevented sessions will continuously be retried to be created in the These prevented sessions will continuously be retried to be created in the background, and they will be once resources are available (ex: once some existing Hessians are deleted). Those sessions in the retry queue can be viewed via 'show bfd session pending' command.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-PROT_SERVER_INIT_SUCCESS Successfully initialized protect server

Explanation    After failing to initialize itself as PFI fast protect server, PROT_SERVER_BFD, once or more, BFD was able to successfully complete initialization.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_BUNDLE_ALL_MEMBER_OFF BFD session to neighbor [chars] on interface [chars] is not running in all member mode

Explanation    The specified BFD session is not running in all member mode.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_BUNDLE_ALL_MEMBER_ON BFD session to neighbor [chars] on interface [chars] is running in all member mode

Explanation    The specified BFD session is now running in all member mode.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_BUNDLE_NO_ECHO No resources for session to neighbor [chars] on interface [chars] to run echo mode, continuing with async mode

Explanation    This BFD over bundle session cannot run echo mode due to lack of PPS resources. The session will continue to run in async mode until PPS is available. Once PPS resources have been cleared up, then disable and enable echo mode on this interface via configuration to startup up the echo mode.

Recommended Action    Remove other BFD sessions to free resources for this session

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_BUNDLE_NO_ECHO_CLR Lack of resources condition has cleared for session to neighbor [chars] on interface [chars] to run echo

Explanation    Resources are now available for this BFD over bundle session to run echo mode.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_INHERIT_OFF BFD session to neighbor [chars] on interface [chars] is not inheriting state from session over [chars]

Explanation    The specified BFD session is no longer inheriting BFD state from another BFD session.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_INHERIT_ON BFD session to neighbor [chars] on interface [chars] is inheriting state from session over [chars]

Explanation    The specified BFD session is now inheriting BFD state from another BFD session.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES No resources for session to neighbor [chars] on interface [chars], interval equals [unsigned int] ms[chars]

Explanation    The BFD session can not be created or modified due to lack of resources.

Recommended Action    Remove other BFD sessions to free resources for this session

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES_CLR Lack of resources condition has cleared for session to neighbor [chars] on interface [chars]

Explanation    Resources are now available for this session.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_REMOVED BFD session to neighbor [chars] on interface [chars] has been removed

Explanation    The BFD session has been removed. This is due to the application(s) removing the BFD session. This can happen as a result of BFD being unconfigured under the application(s) or as a result of the application(s) adjacency being removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_DOWN BFD session to neighbor [chars] on interface [chars] has gone down. Reason: [chars]

Explanation    The BFD session has gone down. This may be as a result of the forwarding path being down.

Recommended Action    Determine if the forwarding path to the neighbor has gone down.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_UP BFD session to neighbor [chars] on interface [chars] is up

Explanation    The BFD session is now up.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_VERSION_CHANGE BFD session to neighbor [chars] on interface [chars] is administratively down due to version change from version [unsigned int] to version [unsigned int]

Explanation    The BFD session has been brought administratively down to change protocol version.

Recommended Action    No action is required.

BGP_AD Messages

Error Message     
 
    
    
   

%L2-BGP_AD-3-OUT_OF_LABEL Failed to allocate a label block

Explanation    'This error happens when the system had failed to allocate a label block ' 'as it may be running out of the label blocks. ' 'Note that when label blocks are freed, they go to zombie state for ' '30 minutes. During this period, repeated addition/removal of the same ' 'configuration will result in allocating different label blocks each time. ' 'This can lead to running out of label blocks quickly '

Recommended Action    'Please remove l2vpn config and wait for 30 minutes until the zombie ' 'pool is cleared and put back the config. '

BM_PD Messages

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent bundle Manager adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-BASE_MAC Unable to obtain base MAC address

Explanation    --

Recommended Action    Check the VT topology definition file to ensure a Host MAC Address is specified. Check the LRd stub library and VT IO code to see if there is a bug in accessing the defined value.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_CMPL_DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the bundlemgr adjacency process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BM Messages

Error Message     
 
    
    
   

%L2-BM-3-ERR_IIR_MEMBERSHIP Link [chars] in [chars] reported by IIR in bundle [chars].

Explanation    When synchronizing with IIR during restart the link was reported to be in a different bundle from the checkpoint records of the process. This should never happen and is not recoverable. The information from IIR was discarded and the process is now out of step with IIR, possibly leading to further problems.

Recommended Action    Delete the checkpoint data for the Bundle Manager process that reported the error (run rm /tmp/chkpt_bundlemgr_distrib*) and restart the process.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ACTIVATE Failure during activation of [chars]. Error: [chars]

Explanation    A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_DB_CHKPT_RECOVER Unable to recreate object ID [unsigned int] after restart. Error: [chars]

Explanation    When recovering data from checkpoint, an error occurred and the data is lost.

Recommended Action    Verify that bundle parameters and bundle membership are as expected. Copy the error message exactly as it appears on the console or in the system log. Issue the show interface command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle output, call your Cisco technical support representative and provide the representative with the gathered information. If the data is as expected in the output of both commands then no further action is required, otherwise unconfigure and reconfigure any missing parameters.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ERRDIS_NOTSUPPORTED Could not error-disable interface [chars]; driver returned [chars]

Explanation    A member interface could not be error-disabled as the driver claims not to support this feature. If the member is running in Ether/POSChannel mode, traffic may still be received on this member - this may breach configured QoS policies and will prevent an mLACP brute-force switchover from taking place.

Recommended Action    Shut and no-shut the member interface may clear the condition. If the error persists, manually shutting the member interface will prevent any QoS breaches.

Error Message     
 
    
    
   

%L2-BM-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occurred in the event loop. The process has exited and restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_GROUP_CREATE Unable to create GSP group ([chars]). Error: [chars]

Explanation    Creation of the group used to communicate between Bundle Manager processes failed. This resulted in the restart of the process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show gsp groups command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show gsp groups output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_DATA Invalid [chars] specified by IIR for CH[hex]: [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognized values for that type. The information is invalid and the result is that adjacencies for this bundle cannot be programmed in hardware.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_HANDLE Invalid (NULL) interface handle supplied for a bundle by IIR

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    If this event can be associated with changes to a particular bundle then delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_DATA Invalid [chars] specified by IIR for CH[hex] member CH[hex]: [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognized values for the type. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_HANDLE Invalid (NULL) interface handle supplied by IIR for a member of <<CH%08x>>

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_OP Unable to report IIR op failure for b_ifh [hex], m_ifh [hex] (op [chars], state [chars]). Error: [chars]

Explanation    An error occurred processing the IIR event and the bundle EA process was unable to report this error back to IIR. This may lead to some inconsistency with the bundle membership in the data plane not matching what is intended according to the control plane.

Recommended Action    The failure to report the error back to IIR suggests a problem in the connection to IIR. This may have been a transient problem, but restarting ifmgr and/or the bundlemgr_ea process on the location of the error might be necessary. The error that should have been reported also needs to be dealt with. This error may have come from some lower layer platform component, possibly a resource allocation error. If the error code provides some information as to the failure then take action appropriate to the error. If the error code is not specific then take action according to whether the event was a link activation or a link deactivation/deletion. For activation problems unconfigure and reconfigure the member link - if this fails try restarting the bundlemgr_ea process after unconfiguring the member link. For deactivation/deletion failures try restarting the improxy process to trigger a complete resync by the bundlemgr EA.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_SUB_HANDLE Invalid (NULL) interface handle supplied by IIR for a sub-interface of <<CH%08x>>

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT_ENS Failure to initialize ENS - retry scheduled. Error: [chars]

Explanation    A failure occurred during the initialization of ENS library in the process. This probably indicates an underlying more severe problem. A retry will be attempted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_LINK_ATTACHED Link [chars] is attached to [chars] that is thought to have no attached members.

Explanation    This process believes that there are no aggregated links, but this link is marked as attached. This error is most likely caused by failing to attach or detach a link correctly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MEM_ALLOC Unable to allocate [unsigned int] bytes of memory.

Explanation    Memory allocation failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_CLEANUP Failure during cleanup of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the cleanup of the DLL. This may result in the DLL not being completely cleaned up, possibly causing errors in a subsequent re-initialization of the DLL.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_INIT Failure during initialization of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the initialization of the DLL. This resulted in the DLL not being loaded into the SNMP agent, and thus the MIB services will not be available.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_NETIO_INIT Failure [chars] in the bundle NetIO DLL during [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the bundle NetIO DLL. If this occurred during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.

Recommended Action    If the error message indicates the failure is low memory condition, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_PAKMAN Unable to handle pakman corruption error: [chars]. Process exiting

Explanation    A packet manager corruption has been reported and the Bundle Manager process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RECREATE_BUNDLE Unable to recreate bundle CH[hex]. Error: [chars]

Explanation    When recovering the checkpointed data for a bundle, an error occurred and the data is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show interface bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show adjacency bundle name detail hardware location loc of error command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show adjacency bundle name detail hardware location loc of error output, call your Cisco technical support representative and provide the representative with the gathered information. If the bundle appears correctly in the output of all three commands then no further action is required, otherwise unconfigure and reconfigure the bundle.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_BUNDLE Unable to repair bundle CH[hex] checkpoint structures. Error: [chars]

Explanation    When repairing the checkpoint structures for the bundle database an error occurred for named bundle and the bundle was not checkpointed. The next time an attempt is made to checkpoint the bundle it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_DATABASE Unable to repair [chars] database. Failure during checkpoint [chars]. Error: [chars]

Explanation    When repairing the checkpoint structures for the named database an error occurred in the database checkpoint registration. As a result the process was intentionally restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPLICATE Replication failed for [chars], to [unsigned int] node(s). First node: [chars]. Error: [chars]

Explanation    When attempting to replicate the bundle to one or more new interface locations, the replication operation failed. This probably happened because some hardware resource on the specified LC(s) was exhausted. The record of the new member(s) which triggered this replication will be removed from the bundle process on the RP but will still be referenced by the bundle process on the LC.

Recommended Action    Determine whether the hardware resources for the LC(s) have been oversubscribed, e.g. more VLANs on the LC(s) and on the bundle that the LC(s) can support. If this is the case, reduce the number of allocated VLANs. Then remove the member configuration and reapply.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_EXCEED_IIR Exceeded the IIR resync limit for [chars]. Process exiting.

Explanation    The maximum number of attempts to resync with IIR have been exceeded for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_SCHED_IIR Unable to schedule an IIR resync for [chars]. Process exiting.

Explanation    An attempt to schedule a resync with IIR has failed for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED Exceeded maximum number of retries for [chars]

Explanation    After attempting to resend or query information a number of times, the retry limit has been exceeded and no more attempts will be made. The effect of the message will therefore be lost. The impact will depend on the message which was lost. If the message refers to a global error then the process will exit and be restarted.

Recommended Action    If the message referred to a global error then check that the process has restarted successfully. If the message referred to a bundle or bundle member then check that the object is still configured and still exists. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_BDL Exceeded maximum number of retries for [unsigned int] bundles. First bundle (and error) [chars] ([chars])

Explanation    After attempting to resend or query information for a set of bundles a number of times, the retry limit has been exceeded and no more attempts will be made for the failed set of bundles. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in show bundle.

Recommended Action    Check that the bundle(s) still exist(s). Make a minor change to the settings of the bundle(s) experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_GSP Retry limit for GSP initialization exceeded: [chars]

Explanation    After attempting to create the GSP group used for communications with the Bundle Manager process on another node a number of times, the retry limit has been exceeded. The cause of the failure is very likely to be some external communication failure - so check for evidence of this. The process will exit and be restarted automatically so no further action is needed for Bundle Manager to retry.

Recommended Action    Check that other processes are not reporting similar communication errors, as this is likely to be a general communication problem. The Bundle Manager process has exited and will be restarted, so no action is needed, though unless the communication problem is resolved the process will still not be able to startup.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_IG Exceeded maximum number of retries for [unsigned int] ICCP Groups (IGs). First IG (and error) [unsigned int] ([chars])

Explanation    After attempting to resend or query information at an ICCP Group level for a number of times, the retry limit has been exceeded and no more attempts will be made for the failed set of IGs. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in show bundle.

Recommended Action    Check that the IG(s) still exist(s). Note that IG 0 is the local IG, and contains all non-mLACP bundles. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_IMP Exceeded the retry limit for IMP events.

Explanation    The maximum number of attempts to retry an IMP message has been exceeded. An error has occurred in the clean up of a bundle, so there may be residual data for the bundle in the linecard components which could cause subsequent problems. Restart the process that reported the error to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_MBR Exceeded maximum number of retries for [unsigned int] members. First member (and error) [chars] ([chars])

Explanation    After attempting to resend or query information for a set of bundle members a number of times, the retry limit has been exceeded and no more attempts will be made for the failed set of members. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in show bundle.

Recommended Action    Check that the member(s) still exist(s). Make a minor change to the settings of the member(s) experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_NODE Exceeded maximum number of retries for [unsigned int] nodes. First node (and error) [chars] ([chars])

Explanation    After attempting to resend or query information for a set of nodes a number of times, the retry limit has been exceeded and no more attempts will be made for the failed set of nodes. The effect of the message will therefore be lost. The impact will depend on the message which was lost, but the error will give an indication as to the failure. Further information may also be found in show bundle.

Recommended Action    Check that the node(s) still exist(s). Note that the nodes may be physical local LCs, or may refer to mLACP peers. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_SYSTEM_MAC Retry limit for system MAC address query exceeded: [chars]

Explanation    After attempting to query the system MAC address from SDRd a number of times, the retry limit has been exceeded. The cause of the failure is likely to be an issue with SDRd or Shelfmgr - so check for evidence of this. The process will exit and be restarted automatically so no further action is needed for Bundle Manager to retry.

Recommended Action    The Bundle Manager process has exited and will be restarted, so no action is needed. Check that the board (EEPROM etc.) is correctly programmed since this is the source of the MAC address information and therefore one possible cause of the problem.

Error Message     
 
    
    
   

%L2-BM-4-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_SYSTEM_MAC_RESET Existing system MAC address not found in allocation. System MAC address for bundles is being reset

Explanation    After a resync has occurred between Bundle Manager and the MAC allocation process, the MAC address assigned for use as the system MAC has not been found in the addresses allocated to bundle manager. Bundle manager will choose a new MAC address for use for this purpose. A flap will be seen on bundle links running LACP.

Recommended Action    The Bundle Manager process will select a new address automatically, so no further action is needed to resolve this error.

Error Message     
 
    
    
   

%L2-BM-4-ERR_TX_HEAP_LOOKUP Failed to create non-existent entry for interface CH[hex] while attempting to [chars]: [chars]

Explanation    An attempt to create a new database entry for a port failed. In addition to indicating that the line card is running low on system resources, this suggests that the shared-memory database is out-of-sync with the main database. Once some system resources have been released, the bundlemgr_local process should be restarted to retry the timer creation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-BM-4-ERR_TX_TIMER Failed to [chars] periodic timer for interface CH[hex]: [chars]

Explanation    An attempt to create or start a timer for periodic sending failed. Regular LACPDUs will NOT be sent out. This suggests that the line card is running low on system resources. Once some system resources have been released, the bundlemgr_local process should be restarted to retry the timer creation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-BM-4-ERR_UNREPLICATE Unreplication failed for [chars], to [unsigned int] node(s). First node: [chars]. Error: [chars]

Explanation    When attempting to unreplicated the bundle from the specified location(s), the unreplication operation failed. Some hardware resources may continue to be used for the bundle on the specified location(s). It is also possible that there could be a problem replicating the bundle to those locations again if a new member is added.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-LRD_RESYNC Bundle member [chars] is being referenced from a non-existent node [hex]

Explanation    When resyncing with LRd, bundlemgr has unexpectedly found that a bundle member is on a card that no longer exists. The member will be cleaned up.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-5-ACTOR_CHURN Interface [chars] in [chars] [chars] on actor system

Explanation    Actor churn has either been detected (due to the failure of a link to synchronize soon enough) or has been cleared. If the link is in Standby state, then actor churn will be detected after the churn timeout; this is expected behavior. Otherwise, this indicates a possible misconfiguration.

Recommended Action    If actor churn has been declared and the link is not marked as Standby, check that the configuration for the link allows it to aggregate, and fix as appropriate. Check for misconfigurations between the two ends of the link which is reporting churn. The output of the show bundle command may help identify the problem.

Error Message     
 
    
    
   

%L2-BM-5-ERR_MAC_RELEASE Could not release reserved MAC addresses from allocation

Explanation    After a resync with the MAC address allocation server, the Bundle Manager process found that it had more MAC addresses than required by the bundle configuration settings and tried to release some to the server. However, this operation failed, so these extra MACs were kept in the Bundle Manager allocation. This is not an issue unless there is a shortage of MAC addresses for another feature (e.g. Interflex).

Recommended Action    If there is no other feature that is short of MAC addresses, no action is required. Otherwise, try adding and deleting an additional Bundle-Ether interface (with no members). Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-5-ERR_TX_ENQUEUE Unable to queue LACP packet for ingress processing on interface CH[hex] (reason: [chars]). Processing will resume with next received LACP packet.

Explanation    An attempt to queue a received packet for processing failed. An occasional message of this type indicates that bundlemgr_local has temporarily been blocked from processing the queue leading to this harmless condition.

Recommended Action    If this message appears more than once, the bundlemgr_local process should be restarted to try to recover the situation. An occasional message of this type will be harmless.

Error Message     
 
    
    
   

%L2-BM-5-MBR_BFD_NEIGHBOR_UNCONFIGURED The BFD session on link [chars] in [chars] has indicated that its neighbor session has been unconfigured. [chars]

Explanation    The BFD session on the member has transitioned to NBR_CONFIG_DOWN state, indicating that the configuration has been removed from the neighbor. The member will continue to transmit packets for as long as the message specifies, at which point, if the session has not gone back UP, the member will be brought down.

Recommended Action    To stop the member from being brought down, rectify the inconsistency between the BFD sessions of the two neighboring routers within the specified time. EITHER, configure BFD sessions per-member on both routers OR remove the configuration from both routers.

Error Message     
 
    
    
   

%L2-BM-5-MBR_BFD_SESSION_DOWN The BFD session on link [chars] in [chars] has timed out. The member will be removed from the active members of the bundle.

Explanation    There are 3 possible reasons for the BFD session to time out: - the session did not transition to state UP within the given time period after initial start-up. - the BFD session transitioned to state DOWN. - the BFD session timed out after receiving a message indicating that the neighbor's BFD session was unconfigured.

Recommended Action    Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is running on the member interfaces on the neighboring router.

Error Message     
 
    
    
   

%L2-BM-5-MIN_MAX [chars] [chars] has conflicting configuration and is [chars] held down: Maximum-active links [unsigned int], minimum-active links [unsigned int]

Explanation    This is an informational message reporting that a bundle is operationally down because the configuration for minimum active links and maximum active links conflicts. The number of active links required for the bundle to come up is greater than the number of links permitted to be active in the bundle, and there are at least enough links held in standby state for the bundle to come up if the maximum active link criteria were removed.

Recommended Action    If this situation is not intended then either reduce the minimum active link threshold or increase the maximum links permitted in the bundle.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_CANNOT_SWITCHOVER Could not perform mLACP switch [chars] requested by user for bundle [chars]: [chars]

Explanation    A switchover or switchback was requested by the user, but this could not be performed because the bundle is not in an appropriate state or is not configured in the required manner.

Recommended Action    If the message indicates that the switch could not be performed because the router being switched to is already active, no action is required - the command is extraneous. If it indicates that the router being switched to is currently down, action must be taken to recover the bundle on that router before retrying the command. Otherwise, the message indicates a configuration-based issue. Correct the configuration before retrying the command.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_CONNECT_FAILED Failed to connect to another mLACP device in ICCP Group [unsigned int]. Reason: [chars]

Explanation    It was not possible to connect to the specific to a peer device in the specified ICCP Group. mLACP will not be running over the specified ICCP Group.

Recommended Action    If the reason message indicates that the failure is because the application is not in the ICCP Group, ensure that mLACP is configured for the ICCP Group on a peer router. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_CORE_ISOLATION [chars] [chars] as isolated due to [chars] [chars] able to connect to the core

Explanation    Core network connectivity status for the ICCP Group has changed, affecting the bundle. If the bundle is isolated then it cannot be active for MC-LAG.

Recommended Action    Ensure that the backbone interface is able to carry traffic to the core.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_DEVICE_MISCONFIGURATION [chars]

Explanation    There is a misconfiguration between a peer device and the local device.

Recommended Action    Ensure that the configuration (on both local and peer device) is as expected. The message indicates the initial area to check.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_ITEM_MISCONFIGURATION [chars] [chars].

Explanation    If there is a misconfiguration for an item that may be resolved without user intervention, then the item will be temporarily ignored. Once the misconfiguration is resolved, either by a resync of mLACP data or by the user, the item will no longer be ignored.

Recommended Action    If the alarm does not clear, ensure that the configuration (on both local and peer device) is as expected.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_RESYNC_INCONSISTENCY_DISCONNECT Disconnecting from [chars] due to an inconsistency in the mLACP data that could not be resolved with a resynchronization. Reason: [chars]

Explanation    A resync failed to solve an inconsistency and so the local device has disconnected.

Recommended Action    Disable and re-enable mLACP on either the local or the peer device.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_ROID_MISMATCH The ROID ([unsigned long long int]) received from [chars] for [chars], does not match that expected ([unsigned long long int]). Please ensure that the ROID for the bundle is the same on both devices

Explanation    The peer device has transmitted a different Redundancy Object ID for the bundle to that expected.

Recommended Action    Ensure that the ROID of the bundle (on both local and peer device) is as expected.

Error Message     
 
    
    
   

%L2-BM-5-MLACP_UNRESOLVABLE_MISCONFIG_DISCONNECT Disconnecting from [chars] due to an unresolved misconfiguration: [chars]

Explanation    The misconfiguration supplied could not be resolved by arbitration and so the mLACP system disconnected from the peer node on the given ICCP Group.

Recommended Action    Remove the mLACP ICCP Group configuration from both routers and apply the correct configuration.

Error Message     
 
    
    
   

%L2-BM-5-PARTNER_CHURN Interface [chars] in [chars] [chars] on partner system

Explanation    Partner churn has either been detected (due to the failure of the partner to be marked as synchronized on this link soon enough) or has now cleared. If the link is in Standby state on the peer router, then partner churn will be detected after the churn timeout; this is expected behavior. Otherwise, this indicates a possible misconfiguration.

Recommended Action    If partner churn has been declared and the link is not marked as Standby on the peer router, check that the configuration for the link allows it to aggregate, and fix as appropriate. Check for misconfigurations between the two ends of the link which is reporting churn. The output of the show bundle command may help identify the problem.

Error Message     
 
    
    
   

%L2-BM-5-RED_MGMT Selection Logic for bundle [chars]: [chars]

Explanation    There has been a misconfiguration resulting in the problem described being hit in the Selection Logic operation for the bundle.

Recommended Action    Correct the misconfiguration.

Error Message     
 
    
    
   

%L2-BM-6-ACTIVE [chars] [chars] Active as part of [chars]%s

Explanation    This is an informational message reporting that a link has entered or left Active state as part of a bundle interface. The link configuration may have just been changed or there may be an operational reason for the event such as a state change or LACP protocol update.

Recommended Action    Nothing, this is not an error.

Error Message     
 
    
    
   

%L2-BM-6-MBR_BFD_SESSION_UP The BFD session on link [chars] in [chars] has gone UP.[chars]

Explanation    The BFD session on the link has indicated that it is UP state. The link has fast-protect BFD protection on it until further notice.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BM-6-MBR_BFD_STARTING The BFD session on link [chars] in [chars] is starting. [chars]

Explanation    BFD sessions have been started on all the members of the given bundle. If the BFD session has not gone UP by the time specified in the message, the BFD session on the member of the bundle will be marked as DOWN, which may impact traffic.

Recommended Action    Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is configured on the member interfaces on the neighboring router.

Error Message     
 
    
    
   

%L2-BM-6-MEMBER_COMPATIBILITY Interface [chars] in [chars] is [chars] incompatible with the active bundle members [chars]

Explanation    A configuration change has meant that a link is now incompatible (or compatible) with the other members of the bundle. The reason for the incompatibility at the time of raising the alarm is supplied in the message.

Recommended Action    No action is required; however, any link that is incompatible will not be used in the bundle. In order to make the link compatible, check the activity and bandwidth configurations of all the links within the bundle.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_BUNDLE_ACTIVE This device is [chars] the active device for [chars]

Explanation    The role of the mLACP device for this bundle has changed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_BUNDLE_MAC_ARBITRATION The MAC address for [chars] [chars]

Explanation    Each mLACP peer specifies a MAC address for a bundle. If the MAC addressees are different, arbitration must occur. However, if the peer that has supplied the value selected through arbitration disconnects, there will be a flap in the bundle state.

Recommended Action    If the alarm is set, the user should ensure that all peers have the same MAC address for the bundle.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_BUNDLE_PEERING [chars] is [chars] peering with [chars].[chars]%s

Explanation    The mLACP peer device for the bundle has changed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_CONNECT Connected to [chars]

Explanation    An mLACP connection has been established to the specified device.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_DISCONNECT Disconnected from [chars]

Explanation    mLACP has disconnected from the specified devices.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_INVALID_PRIORITY_REQUEST An invalid mLACP port priority [chars] has been received for [chars] on [chars]. [chars] Reason: [chars]

Explanation    An mLACP peer device has requested that the priority of the specified member be changed. This is currently an invalid operation due to the reason specified. If the message indicates that the priority request has been ignored, then the peer will be notified that the priority change has not been made.

Recommended Action    Check that the configuration of all the mLACP peer devices is consistent.

Error Message     
 
    
    
   

%L2-BM-6-MLACP_SYSTEM_ID_ARBITRATION The system id for ICCP Group [unsigned int] has been established by [chars]

Explanation    Each mLACP peer specifies a system id for the ICCP group. If the system id's are different, arbitration must occur. However, if the peer that has supplied the values selected through arbitration disconnects, there will be a flap in the bundle state.

Recommended Action    If the alarm is set, the user should ensure that all peers have the same system id for the ICCP Group.

C_SHIM_PARTNER Messages

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The C-shim Partner initialization failed while trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The C-shim Partner initialization failed while trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_ADD_ERR Fatal Error: Adding batched channelized interface caps failed. Reason: [chars]

Explanation    'There is an error when adding batched channelized interface caps.'

Recommended Action    Please try to reload that particular SPA or restart the SPA process associated with that SPA. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_ADD_ERR Fatal Error: Adding batched channelized interface caps failed. ifh [hex], Reason: [chars].

Explanation    'There is an error when adding batched channelized interface caps.'

Recommended Action    Please try to reload that particular SPA or restart the SPA process associated with that SPA. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_CNTL_ERR Fatal Error: Failed to modify channelized interface caps. Reason: [chars]

Explanation    'There is an error when modifying channelized interface caps.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_CNTL_ERR Fatal Error: Failed to modify channelized interface caps. Reason: [chars]

Explanation    'There is an error when modifying channelized interface caps.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_LKP_ERR Fatal Error: Channelized caps definition file is missing. Reason: [chars]

Explanation    'The Channelized Caps definition file is missing. There may have a packaging issue or someone just accidently removed that file.'

Recommended Action    Please reload the corresponding Jacket Card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-CAP_LKP_ERR Fatal Error: Channelized caps definition file is missing. Reason: [chars]

Explanation    'The Channelized Caps definition file is missing. There may have a packaging issue or someone just accidently removed that file.'

Recommended Action    Please reload the corresponding Jacket Card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-ECM_INIT_FAILED Failed during create ECM initialization, Err: [chars]

Explanation    'There is a software error when creating ECM connection.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-ECM_INIT_FAILED Failed during create ECM initialization, Err: [chars]

Explanation    'There is a software error when creating ECM connection.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-SET_CALLBACK_ERR Fatal Error: Setting call-back to IM failed. Reason: [chars]

Explanation    'There is a software error when trying to set call-back to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-SET_CALLBACK_ERR Fatal Error: Setting call-back to IM failed. Reason: [chars]

Explanation    'There is a software error when trying to set call-back to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-SVR_UBIND_ERR Fatal Error: Failed to unbind to IM. Reason: [chars]

Explanation    'There is a software error when trying to unbind to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-3-SVR_UBIND_ERR Fatal Error: Failed to unbind to IM. Reason: [chars]

Explanation    'There is a software error when trying to unbind to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-4-SVR_BIND_ERR Warning: Failed to bind to IM. Reason: [chars]

Explanation    'There is a software error when trying to bind to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-4-SVR_BIND_ERR Warning: Failed to bind to IM. Reason: [chars]

Explanation    'There is a software error when trying to bind to IM.'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-7-IFH_ERR Warning: Wrong if-handle [hex] [chars]

Explanation    'Receive a message with wrong interface handle. This may be ignored.'

Recommended Action    Ignore

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-7-IFH_ERR Warning: Wrong if-handle [hex] [chars]

Explanation    'Receive a message with wrong interface handle. This may be ignored.'

Recommended Action    Ignore

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-7-IM_CALLBACK_ERR Warning: [chars] failed. Reason: [chars]

Explanation    'There is a software error when handling messages from IM.'

Recommended Action    Ignore

Error Message     
 
    
    
   

%L2-C_SHIM_PARTNER-7-IM_CALLBACK_ERR Warning: [chars] failed. Reason: [chars]

Explanation    'There is a software error when handling messages from IM.'

Recommended Action    Ignore

C12000_FR Messages

Error Message     
 
    
    
   

%L2-C12000_FR-3-SUBIF_COUNT FR Subinterface counter is not initialized

Explanation    Initialisation of subinterface counter in the shared memory failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CCL Messages

Error Message     
 
    
    
   

%L2-CCL-3-INIT_ERROR Initialization failed: ([chars]%s)

Explanation    The classification control list (ccl) DLL failed to initialize. This DLL does a generalization of an Access Control List to include matching on MQC match criteria like QOS group, MPLS EXP, etc. If the ccl DLL fails to initialize, the access control list cannot be programmed into the hardware. %s - indicates the reason for the initialization failure. %s - is the decoded error reason.

Recommended Action    The failure should be handled by the process that is loading the DLL. The calling process should retry the initialization. Collect all debug information if the DLL is continually failing: 'debug ccl ace error location 0/x/cpu0' 'debug ccl api detail location 0/x/cpu0'

CDP Messages

Error Message     
 
    
    
   

%L2-CDP-3-ERR_CONN Connection error on [chars]([pointer]): [chars]

Explanation    An error occurred on one of the event connections managed by CDP which CDP could not recover automatically.

Recommended Action    Try restarting CDP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_ATTR_REGISTRATION Unable to register for duplex change notifications: [chars]

Explanation    CDP registration for duplex change notifications failed. This means that duplex information will be missing from outgoing CDP packets

Recommended Action    Try restarting CDP ('proc restart cdp location location'). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_ADD Failed to add the CDP capsulation to interface [chars]: [chars]

Explanation    CDP could not install the CDP capsulation on the specified interface and hence it is not possible for CDP to send or receive any packets on this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_REMOVE Failed to remove the CDP capsulation on interface [chars]: [chars]

Explanation    CDP could not uninstall the CDP capsulation on the specified interface and hence CDP may be in an inconsistent state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_MTU_REGISTER Failed to register for MTU size changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for MTU size changes on this particular interface. This may cause problems sending CDP packets.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_STATE_REGISTER Failed to register for state changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for state changes on this particular interface. This means CDP will be unable to track the state of the interface. CDP functionality may be impaired.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_INIT Initialisation of CDP on interface [chars] failed: [chars].

Explanation    CDP is unable to run on the specified interface. It is likely that this is due to a lack of available resources.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Configuring 'cdp disable', 'cdp enable' on the interface, or restarting CDP on the affected node may recover the situation.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_STATS No CDP protocol statistics can be collected on [chars]: [chars]

Explanation    It was not possible to register for stats collection on the specified interface. The entry in the 'show interface name accounting' command is likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location node proc restart statsd_server location node If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_ADDRESS_SCAN [chars]: Failed to scan the IPv4 addresses for this interface: [chars]. This means that IPv4 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv4 addresses on this interface has failed. This means that IPv4 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv4 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv4_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_REGISTRATION Unable to register for IPv4 address notifications: [chars]. This means that IPv4 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv4 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv4 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv4_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_ADDRESS_SCAN [chars]: Failed to scan the IPv6 addresses for this interface: [chars]. This means that IPv6 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv6 addresses on this interface has failed. This means that IPv6 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv6 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv6_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_REGISTRATION Unable to register for IPv6 address notifications: [chars]. This means that IPv6 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv6 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv6 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv6_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_STATS No per-interface CDP protocol statistics can be collected: [chars]

Explanation    It was not possible for CDP to register for per-interface CDP protocol stats collection. The entries in the 'show interface accounting' command are likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location node proc restart statsd_server location node If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-STALE_TLV On [chars] the [chars] TLV is not up to date: [chars]

Explanation    CDP received a notification to update a TLV that it sends but failed to do so due to the error given. The information stored by CDP is now out of date.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-DUPLEX_MISMATCH Duplex mismatch discovered on [chars] ([chars]), with [chars] [chars] ([chars]).

Explanation    CDP discovered mismatching duplex configuration on neighboring interfaces.

Recommended Action    Configure the interfaces with the same duplex (full or half).

Error Message     
 
    
    
   

%L2-CDP-4-ERR_MULTICAST_ADDR_SET Error setting up the CDP multicast address on [chars] (media [chars]): [chars]

Explanation    The driver returned an error while setting up the CDP multicast address. It is possible that CDP packets will be dropped and not reach the CDP process.

Recommended Action    If CDP packet loss is seen then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-ERR_TABLE_RESIZE Not enough memory to clear and resize the CDP table

Explanation    CDP ran out of memory when trying to resize the CDP hash table.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. CDP will try and continue to use the previous CDP table.

Error Message     
 
    
    
   

%L2-CDP-4-NEIGHBOR_LIMIT The CDP cache on this node is full. It contains [dec] neighbor entries

Explanation    The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defend against DoS attacks.

Recommended Action    Check the existing CDP neighbors for bogus entries, CDP may be the victim of an attempted DoS attack. The 'clear cdp table' command can be used if CDP neighbor entries need removing.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA CDP did not find any recognized media to run over

Explanation    CDP failed to initialize the media module because it could not find any media that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    If there are no interfaces on this node with a media type that CDP is expected to run on then this could be a normal condition. If it is expected that CDP should run on the type of interfaces on this node then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA_DRIVERS CDP did not find any recognized media drivers

Explanation    CDP failed to initialize the media module because it could not find any media drivers that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    There are no media drivers for the interfaces on this node. If CDP does not support the interface types on this node then this could be a normal situation Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_INIT Initialization warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during the initialization of CDP. CDP will restart and this should resolve the problem.

Recommended Action    CDP will try to recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_TERM Termination warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during CDP's termination. In this situation CDP should recover automatically.

Recommended Action    CDP should recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-6-DELETED_NEIGHBOR CDP Neighbor [chars] on interface [chars] has been deleted, remote interface [chars]

Explanation    An entry has been removed from the CDP neighbors table. Notification of deleted CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-CDP-6-NEW_NEIGHBOR New CDP neighbor [chars] detected on interface [chars], remote interface [chars]

Explanation    A new entry has been added to the CDP neighbors table. Notification of new CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

CEMA Messages

Error Message     
 
    
    
   

%L2-CEMA-3-FATAL_ERR CEMA Fatal Error: [chars]

Explanation    An internal fatal error was detected in CEMA module operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CEMA-3-MISMATCH_ERR CEMA Mismatch Error: [chars]

Explanation    A process on the line card that manages a SPA was restarted. As a part of restart, a mismatch was detected between user specified configuration and the actual configuration of SPA hardware.

Recommended Action    The mismatch can be service affecting in certain cases. Please check if the entity specified in the error log and all it's children are functioning correctly. Contact Cisco TAC for further assistance.

Error Message     
 
    
    
   

%L2-CEMA-3-UNSUPPORTED_ERR CEMA Unsupported Feature Error: [chars]

Explanation    A request was made for information on a feature that is unsupported on the device specified in the request. This error may affect the usability of the device if the feature is necessary for proper operation.

Recommended Action    Check to see if the device on which the feature has failed is performing correctly for all necessary functionality.

Error Message     
 
    
    
   

%L2-CEMA-4-GEN_ERR CEMA Internal Error: [chars]

Explanation    An internal error was detected in CEMA module operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CFM Messages

Error Message     
 
    
    
   

%L2-CFM-3-AIS_GEN_ERROR Failed to [chars] the generation of AIS for [unsigned int] local MEPs as a result of configuration or network change: [chars]

Explanation    A failure occurred when attempting to generate or disable AIS messages for a number of local MEPs. This event was triggered by either a change within the network (e.g. to a remote MEP or to an EFP state) or a change in configuration (e.g. a CoS bit or AIS transmission interval change). This may result in AIS being sent at the wrong level or interval, no AIS being sent at all, or AIS being sent when it should not be. If the error persists, CFM may not operate correctly.

Recommended Action    If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was triggered by a change in the network, the error may be cleared by restarting the cfmd process on the node where the error is occurring, or shutting down and re-enabling any affected interfaces.

Error Message     
 
    
    
   

%L2-CFM-3-AIS_GEN_TIMER Failed to start AIS generation timer in [chars]%s[chars]%s with timeout [unsigned int]ms, jitter [unsigned int]ms: [chars]

Explanation    An error occurred while starting or restarting the AIS generation timer. No further AIS messages will be sent for MEPs/EFPs in this service/bridge domain.

Recommended Action    Unconfigure AIS generation on the service or EFP, then reconfigure it. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurs.

Error Message     
 
    
    
   

%L2-CFM-3-CCI_TIMER Failed to start CCM generation timer in domain [chars], service [chars] with timeout [unsigned int]ms, jitter [unsigned int]ms: [chars]

Explanation    An error occurred while starting or restarting the CCM generation timer. No further CCM messages will be sent for MEPs in this domain/service.

Recommended Action    Unconfigure CCM generation for this service, commit the configuration, then reconfigure it. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurs.

Error Message     
 
    
    
   

%L2-CFM-3-CCM_GEN_ERROR Failed to update or disable the generation of CCM messages for a number of local MEPs as a result of an interface state change or changes in configuration: [chars]

Explanation    A failure occurred when attempting to generate or disable CCM messages for a number of local MEPs. This event was triggered by either an EFP state change or a change in configuration (e.g. CoS bit changes or CCM interval changes). This may result in outgoing CCM messages containing incorrect interface state information or CoS bits, no CCMs being sent at all, or CCMs being sent when they should cease. If the error persists, CFM may not operate correctly.

Recommended Action    If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was the result of an EFP state changes, the error may be cleared by restarting the cfmd process on the node where the error is occurring, or shutting down and re-enabling any affected interfaces.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_APPLY_FAILED [chars] failed to apply new CFM Configuration. It is likely that the protocol will not operate as intended: [chars]

Explanation    The CFM Global Manager or the CFM Daemon on the specified node was unable to enact a set of valid configuration changes. Future configuration changes may be adversely affected and the protocol is likely not to operate as intended. The problem could be caused by a system resource issue.

Recommended Action    Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cgm' or 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_DELETED_INTF_OP Received new configuration for an interface that is not expected to exist. Configuration operation: [chars]. Interface CH[hex]

Explanation    A notification from another part of the system indicates that some operation should be performed on an interface that does not exist in Interface Manager. The CFM Daemon's internal state will be updated in accordance with the requested operation, but no Maintenance Points will be created on the affected interface. This indicates an inconsistency between the Interface Manager and other infrastructure components.

Recommended Action    Removing and re-applying the configuration responsible for the failed operation may help to resynchronize system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_MAC_ADDR_UPDATE_FAILED Error processing MAC address changes for [unsigned int] interfaces. Outgoing CCMs will contain incorrect source MAC addresses: [chars]

Explanation    CFM was unable to update internal MAC address state following a change to the MAC addresses on a group of interfaces. CCMs will now be being sent on the affected interfaces with an incorrect MAC address.

Recommended Action    Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd location node' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_MP_CREATE_FAILED Failed to create Maintenance Points following a change to CFM configuration: [chars]

Explanation    CFM encountered an error while trying to create new Maintenance Points and retrying the operation has not resolved the problem. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some Maintenance Points will not have been created.

Recommended Action    Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd location node' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_MP_UPDATE_INCONSISTENCY Failed to update MP config on interface CH[hex]: [chars]

Explanation    CFM encountered an error while trying to delete and/or create Maintenance Points on the specified interface and retrying the operation has not resolved the problem. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some Maintenance Point deletes and/or creates have failed.

Recommended Action    Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd location node' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_SLA_INST_FAILED The creation of an SLA operation failed: [chars]

Explanation    CFM encountered an error while trying to create new SLA operations. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some SLA operations will not have been created.

Recommended Action    Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd location node' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-CFG_XC_MEP_CREATE_FAILED Failed to create cross-check MEPs following a change to CFM configuration on interface CH[hex]: [chars]

Explanation    CFM encountered an error while trying to create new cross-check MEPs This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some cross-check MEPs will not have been created.

Recommended Action    Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd location node' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-DB_DELETE_FAILED Failed to delete [chars] object (ID [chars]) from the [chars] database, because the object wasn't found

Explanation    A user requested that an object be removed from a database in which it was not present. The process should recover from this event, but it may indicate an internal inconsistency which could cause other problems.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CFM-3-DB_INCONSISTENT An error condition that indicates an internal inconsistency in a database was encountered: [chars]

Explanation    An internal inconsistency was identified while performing some operation on the database. The process will attempt to recover a consistent state, and should be able to continue operating. It is possible that some parts of CFM may become out of sync.

Recommended Action    If additional problems are observed then restarting the process may help to restore the system to a consistent state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-DB_LOCK_ERROR Failed to perform [chars] operation on [chars] lock in database: [chars]

Explanation    An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behavior should be observed.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CFM-3-EA_ERROR CFM EA failed to process the new CFM configuration on interface CH[hex]. [chars]

Explanation    CFM encountered an error while trying to update the hardware packet handling after a configuration update, and retrying the operation has not resolved the problem. This situation could indicate that system resources are low, or a problem with another part of the system. It is possible that CFM will not receive packets that it should be processing, or packet processing may operate more slowly than expected.

Recommended Action    Restarting cfmd or cfm_ea processes on the affected node may help to update the packet handling correctly. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd' on the affected node. If that has no effect, issue 'process restart cfm_ea' on the node with the affected interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-ECM_RETRY_ERROR Failed to schedule a retry attempt using the Event Connection Manager library: [chars]

Explanation    CFM encountered an error while attempting to schedule a retry for a failed operation. The operation will not be retried. It is likely that some Maintenance Points will not be created. This may indicate that system resources are low.

Recommended Action    Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-ELO_LB_STATE Failed to retrieve the 802.3 Ethernet Link OAM loopback state of some physical interfaces. [chars]

Explanation    CFM encountered an error while trying to retrieve the 802.3 Ethernet Link OAM loopback state of some physical interfaces, in order to report the state correctly in outgoing CCMs. This situation could indicate a problem in the Ethernet Link OAM daemon (elod) process, or that system resources are low, or a problem with another part of the system. It is likely that the interworking state reported in outgoing CCM messages will be incorrect.

Recommended Action    Restarting the CFM Daemon or Ethernet Link OAM Daemon may help to resynchronize the loopback state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd' and 'process restart elod' on the node with the affect interfaces. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-ENCAP_ALLOC Failed to process an encapsulation change. Error: [chars]

Explanation    CFM was unable to process a change in interface encapsulation. As a result packets sent by CFM may be sent with the incorrect encapsulation. This indicates that either system resources are low, or that there is an internal problem with CFM.

Recommended Action    Wait until any situation which is putting stress on system resources is resolved, and then try to delete and re-apply the encapsulation configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-ENGINE_TIMER Failed to process engine timer: [chars]

Explanation    An error occurred while processing the engine thread timer wheel. This may cause CCMs not to be sent, or peer MEPs not to time out after the configured loss time.

Recommended Action    The process may recover after 60s. If the problem persists, it may be possible to recover by restarting the 'cfmd' process on the node where the problem occurred.

Error Message     
 
    
    
   

%L2-CFM-3-FAULT_NOTIFICATION Failed to generate a fault notification for a local MEP - domain: [chars], service: [chars], MEP ID: [unsigned int], interface: CH[hex]: [chars]

Explanation    An error was encountered when trying to generate a fault notification for a local MEP, as a result of a defect detected from a peer MEP. This will mean that the corresponding SNMP trap will not be raised. If the error persists, CFM may not operate correctly.

Recommended Action    If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.

Error Message     
 
    
    
   

%L2-CFM-3-IM_STATE_ERROR Failed to reply to Interface Manager with states for [unsigned int] interfaces: [chars]

Explanation    CFM encountered an error while trying send a state message to Interface Manager, and the error could not be recovered from by retrying. Interface Manager is likely to continue to wait for a response, and then shut down the affected interfaces.

Recommended Action    The state operation is not essential to the operation of CFM, so if no ill effects are observed then no action is needed. If the Interface Manager shuts the interfaces down unexpectedly, then try issuing 'no shutdown' for each affected interface, to refresh the state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-INV_DEBUG_FLTR Failed to enable the requested debugging. Invalid debug filter string: [chars]

Explanation    The CFM debug library was notified about the creation of a debug item in SysDB which had an unexpected number of filter parameters. The corresponding debugging flag has not been enabled in CFM, which may lead to some debug not being printed as expected.

Recommended Action    If any problems are observed, then try removing the debug filter using the 'no debug ethernet cfm' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-L2FIB_ERROR Failed to communicate with the L2FIB Infrastructure: [chars]

Explanation    The L2FIB Infrastructure reported an error which could not be handled. The operation will not be retried - the internal state of CFM may not match the global system state.

Recommended Action    If any problems are observed, then check the status of the l2fib and l2vpn processes for any obvious errors. If necessary, try restarting the process that encountered the error using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-LWM_ERROR Failed to send a [chars] LWM message from [chars] to [chars] thread in the CFM Daemon - message type: [chars]: [chars]

Explanation    The LWM subsystem indicated an error when trying to send a message between threads in the CFM Daemon, which could not be handled. The operation will not be retried - the internal state of CFM may not match the global system state.

Recommended Action    If any problems are observed, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-MEPS_DELETE_CCM_GEN Attempt to delete [unsigned int] MEPs while some MEPs are having CCM generation enabled/disabled.

Explanation    The CFM MA tried to delete a number of MEPs whilst some of those MEPs were scheduled to have CCM generation enabled or disabled. The CCM generation batches have been cleared, which may cause an inconsistency between CFM's internal state and the requested configuration.

Recommended Action    If any problems are observed, then try restarting the CFM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-MP_DB_ALLOC Failed to create Maintenance Point [chars] in the database. Error [chars]

Explanation    The CFM MA was unable to create a new Maintenance Point in the database. This indicates that either system resources are low, or that there is an internal problem with CFM. The set of Maintenance Points created by CFM will not match the requested configuration.

Recommended Action    Wait until any situation which is putting stress on system resources is resolved, and then try to delete and re-apply the configuration for the affected Maintenance Points. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-PAK_ERROR Failed while processing packet in [chars]: [chars]

Explanation    An error occurred unexpectedly while calling the packet management infrastructure to handle a CFM packet during packet send.

Recommended Action    The 'cfmd' process will restart after this error is seen. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-RETRY_EXCEEDED Reached the maximum number of retry attempts for [chars]. Failed updates for [unsigned int] interfaces will not be applied

Explanation    The CFM MA attempted the maximum number of retrys for a failed operation. The operation will not be retried again. The MA will attempt to recover, but it is possible that the Maintenance Points created will not match those specified in configuration. The problem could be caused by a system resource issue.

Recommended Action    Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-STATE_UPDATE_DROPPED Failed to update [unsigned int] interface states in CCMs.

Explanation    There were insufficient system resources to provide the CFM Protocol Manager with interface state updates. The state update notifications will not be delivered, and the interface states in Continuity Check Messages will be incorrect for the affected interfaces. Other CFM functionality is unaffected.

Recommended Action    Wait until any situation which is putting stress on system resources is resolved, and then issue the 'process restart cfmd' command to resynchronize the Interface states within CFM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-3-WL_QUEUE_FAILED Failed to schedule Maintenance Point [chars] processing for [chars]. [chars]

Explanation    The CFM MA failed to schedule an operation required to modify Maintenance Point configuration for an interface. This is likely to be a system resource issue.

Recommended Action    Attempt to resolve any memory issues before attempting to solve this problem. After system resource isses have been resolved, issue 'process restart cfmd' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-AIS_EXPIRY_TIMER Failed to restart AIS expiry timer for MEP in domain [chars], service [chars], local MEP ID [unsigned int] on interface CH[hex]: [chars]

Explanation    An error occurred while restarting the AIS expiry timer for the local MEP specified in the error message. This could cause a received AIS or LCK signal to be incorrectly reported as having stopped.

Recommended Action    If the error persists and the local MEP continually reports the received signal as starting and stopping, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.

Error Message     
 
    
    
   

%L2-CFM-4-BD_BATCH_DELETE_FAILED Failed to allocate memory for batched delete of unused bridge domains.

Explanation    Following a configuration change, CFM no longer needs to retain information about some bridge domains but has failed to delete the information from its database. The process will continue to operate correctly but is using more memory than is necessary.

Recommended Action    No specific action is needed, though the warning could be a sign of low memory conditions. If other memory issues are seen, resolve those first and then reapply the configuration change.

Error Message     
 
    
    
   

%L2-CFM-4-CCM_PARSE_FAILED Failed to process CCM received by MEP in domain [chars], service [chars], local MEP ID [unsigned int] on interface CH[hex], CCM received from [chars]: [chars]

Explanation    An error occurred while processing a received CCM message - the error string gives more details. This error is not caused by malformed or invalid packets. If the error persists, CFM may not operate correctly.

Recommended Action    If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.

Error Message     
 
    
    
   

%L2-CFM-4-CFG_INCONSISTENT Configuration change requested is inconsistent with the current state: [chars]

Explanation    CFM received a configuration update that can not be processed because it is not consistent with the current internal state. The requested update will be rejected.

Recommended Action    Restarting the process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-EFD_SHUTDOWN_ERROR Failed to shut down interface CH[hex]: [chars]

Explanation    A failure occurred when attempting to shut down an interface using EFD after a fault condition was detected by one of the local MEPs on the interface. This event was triggered by either a change within the network (e.g. detecting a defect with a remote MEP) or a change in configuration that enabled EFD on a service. This will result in the interface remaining up, when it should be shut down.

Recommended Action    If the error is the result of a configuration change, remove and reapply the configuration. If this does not work, or the error was triggered by a change in the network, the error may be cleared by restarting the cfmd process on the node where the error is occurring.

Error Message     
 
    
    
   

%L2-CFM-4-ENCAP_CHANGE [chars]: [chars] on Interface CH[hex] - CFM [chars] on this interface

Explanation    Set: Packets cannot be sent by CFM from the interface mentioned in the message, for one of the following reasons: - The interface has no encapsulation configured. - The interface has a complex encapsulation configured, which is not supported in conjunction with CFM. Complex encapsulations include: - Matching on source or destination MAC addresses - Matching on payload ethertype - Matching on VLAN tags using the 'any' keyword. In these cases, it cannot be determined how to format the ethernet header for sending CFM packets, and hence CFM is not supported in these scenarios. - The CoS bits configured for the MEP conflict with the CoS bits configured in the interface encapsulation. Clear: the error condition no longer holds; the interface has a supported encapsulation and CFM packets can be sent.

Recommended Action    If the problem relates to the encapsulation, then either configure the encapsulation on the interface, without using the above types of 'complex' matching criteria, or deconfigure any CFM MEPs on the interface. If the problem is a conflict in the CoS bits, then either reconfigure either the MEP or the encapsulation, so that the CoS bits specified for the MEP fall within the CoS bits specified in the encapsulation, if any.

Error Message     
 
    
    
   

%L2-CFM-4-ERR_CONFIG Unsupported CFM config detected on interface handle [hex]. Total packets dropped [dec]

Explanation    Ethernet OAM CCMs are configured for an Layer 2 VPN interface over an unsupported pseudowire encapsulation

Recommended Action    Ethernet OAM CCMs upward MEP/MIP configuration is not supported for VPLS/L2TPv3 based L2VPN Attachment Circuits. Please review ethernet CFM configuration attached to the L2VPN interfaces and remove the unsupported Ethernet CFM upward MEP/MIP configuration.

Error Message     
 
    
    
   

%L2-CFM-4-EXIT_FAILED Failed to notify SysMgr that [chars] is exiting: [chars]

Explanation    The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.

Recommended Action    If the process in not running and it ought to be (i.e., there is CFM configuration remaining), then remove all CFM configuration, commit this change, then re-apply the configuration.

Error Message     
 
    
    
   

%L2-CFM-4-INIT_FAILED Failed to initialize [chars]: [chars]%s

Explanation    An error was encountered while the specified process was initializing. The error message contains details about the source of the error.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-LOSS_TIMER_FAILED Failed to restart loss timer for MEP in domain [chars], service [chars], local MEP ID [unsigned int] on interface CH[hex], peer MAC [chars], peer MEP ID [unsigned int]: [chars]

Explanation    An error occurred while restarting the loss timer for the peer MEP specified in the error message. This could cause the peer MEP to incorrectly be timed out some time later.

Recommended Action    If the error persists and peer MEPs continually flap as a result, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.

Error Message     
 
    
    
   

%L2-CFM-4-LOST_EVENT [chars] lost event: [chars]

Explanation    The specified process failed to receive an event that was sent to it.

Recommended Action    If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.

Error Message     
 
    
    
   

%L2-CFM-4-MIB_CHKPT_BATCH_ERROR Failed to manage the checkpointed state: [chars]. [chars]

Explanation    CFM encountered an error while trying to maintain its checkpoint database. The checkpoint database is used to manage persistent MIB index values for accessing Domains and Services over SNMP. If an error was encountered then CFM has been unable to guarantee that MIB index values will be correctly maintained across process restarts, and existing database objects may have their MIB indices re-assigned.

Recommended Action    CFM should continue to operate normally, except for possible re-ordering of MIB index values for any configured Domains and Services. CFM will have tried to correct any errors it encountered in the checkpoint database. If additional problems with CFM configuration are observed, then restarting the CGM Global Manager may help to resolve the problem. The CFM Global Manager can be restarted by issuing 'process restart cgm' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-MIB_CHKPT_ITEM_ERROR Failed to manage the checkpointed state for a single item: [chars]. [chars]

Explanation    CFM encountered an error while trying to maintain its checkpoint database, for a single item in the database. The checkpoint database is used to manage persistent MIB index values for accessing Domains and Services over SNMP. If an error was encountered then CFM has been unable to guarantee that MIB index values will be correctly maintained across process restarts, and existing database objects may have their MIB indices re-assigned.

Recommended Action    CFM should continue to operate normally, except for possible re-ordering of MIB index values for the affected items. CFM will have tried to correct any errors it encountered in the checkpoint database. If additional problems with CFM configuration are observed, then restarting the CGM Global Manager may help to resolve the problem. The CFM Global Manager can be restarted by issuing 'process restart cgm' on the affected node. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-NOTIFY_AIS_FAILED Failed to relay information about [chars] for MEP in domain [chars], service [chars], local MEP ID [unsigned int]: [chars]

Explanation    The CFM packet handling module has detected that an AIS signal has changed (started or expired), but has failed to notify the management module. As a result, the proper handling for this event (e.g. generating log messages) will not take place.

Recommended Action    If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.

Error Message     
 
    
    
   

%L2-CFM-4-NOTIFY_LOSS_FAILED Failed to relay information about loss of connectivity for MEP in domain [chars], service [chars], local MEP ID [unsigned int], peer MEP ID [unsigned int], peer MAC [chars]: [chars]

Explanation    The CFM packet handling module has detected that a peer MEP has timed out (i.e. that no CCM has been received for the loss time), but has failed to notify the management module. As a result, the proper handling for this event (e.g. generating log messages and SNMP traps) will not take place.

Recommended Action    If the error persists, the problem may be corrected by restarting the cfmd process on the node where the problem is being reported.

Error Message     
 
    
    
   

%L2-CFM-4-PACKET_DECODE_FAILED Failed to decode [unsigned int] ethernet packets. First failed interface: CH[hex], first error: [chars]

Explanation    An error occurred while attempting to decode a batch of ethernet frames which had been received. The source of the error is the Ethernet Packet Infrastructure. The received packets will be dropped as a result of this error. This could cause peer MEPs to time out, or ping/traceroute operations to fail.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CFM-4-RCV_REGISTER Failed to re-register to receive packets on [unsigned int] interfaces. First error: [chars]

Explanation    After a system event, CFM was requested to re-register to receive packets on all the interfaces where it is enabled, but this failed for some interfaces. CFM packets may no longer be received on the affected interfaces.

Recommended Action    If the error persists, it may be cleared by restarting the cfmd process on the node where the error is occurring.

Error Message     
 
    
    
   

%L2-CFM-4-SPIO_WARNING Internal SPIO Error : [chars]

Explanation    SPIO PD software error has occurred. Exact reason given by the error string

Recommended Action    Collect SPIO PI and PD traces along with console logs. show spio trace cfm location sh spio ifhcache cfm/elo ifhandle

Error Message     
 
    
    
   

%L2-CFM-6-AIS_LCK_CHANGE [chars] on local MEP in domain [chars], service [chars] with MEP ID [unsigned int] on interface CH[hex][chars]

Explanation    A new AIS or LCK signal was received by a local MEP or an existing signal expired. This message appears because the service to which the local MEP belongs has AIS logging configured.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-CFM-6-CC_ERROR Peer MEP error change: [chars] - domain [chars], service [chars], local MEP ID [unsigned int], local interface CH[hex], peer MEP ID [unsigned int], peer MAC address [chars], errors [chars]

Explanation    A change in the errors reported by a CCM message from a peer MEP was detected. This message appears because the service which the local MEP belongs to has continuity-check error change logging configured.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-CFM-6-EFD_CHANGE Interface CH[hex] [chars] by MEP ID [unsigned int] in domain [chars], service [chars]

Explanation    An interface was shut down or brought up by a local MEP after a fault condition was detected or cleared. The action is taken because the service to which the local MEP belongs has EFD configured; this message appears because the service has EFD logging configured.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-CFM-6-MEP_CHANGE Peer MEP change: [chars] - domain [chars], service [chars], local MEP ID [unsigned int], local interface CH[hex], peer MEP ID [unsigned int], peer MAC address [chars], errors [chars]

Explanation    A CCM message was received from a new peer MEP, or a previously-known peer MEP timed out (i.e. its configured loss threshold was exceeded). This message appears because the service which the local MEP belongs to has continuity-check state change logging configured.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-CFM-6-SHMWIN_RESET Resetting CFM shared memory data: [chars]

Explanation    The CFM shared memory window is being reset. All shared memory data will be lost. This means that all per-interface, per-MEP and per-peer-MEP counters are reset to zero.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-CFM-6-TOO_MANY_TLVS More than the supported number of TLVs were found while processing [chars] (total length [unsigned int])

Explanation    While processing a received CFM PDU, more than the supported number (32) of TLVs were found. This is very unlikely to occur in normal operation, and may therefore indicate a denial-of-service attack.

Recommended Action    Use CFM debugging ('debug ethernet cfm packets') to determine from where the problematic packets are originating. If the packets are from a trusted source and are expected, modify the configuration on that host to reduce the number of organization-specific or otherwise unknown TLVs contained in the packet (i.e. TLVs not defined in the CFM standard, IEEE 802.1ag).

Error Message     
 
    
    
   

%L2-CFM-6-XC_ERROR Cross-check error change for local MEP in domain [chars], service [chars] with MEP ID [unsigned int] on interface CH[hex] for configured cross-check MEP ID [unsigned int][chars]: [chars]

Explanation    A change in the cross-check status of a peer MEP was detected. This may indicate an expected peer MEP configured by cross-check is missing, or a CCM message has been received unexpectedly from a peer MEP which was not configured for cross-check, or that one of the above errors has been cleared. This message appears because the service which the peer MEP belongs to has cross-check error change logging configured.

Recommended Action    None.

CFMMIB Messages

Error Message     
 
    
    
   

%L2-CFMMIB-3-NO_DEBUG Unable to register for DOT1AG MIB debug. No further debugging will occur: [chars]

Explanation    In the initialisation of the DOT1AG MIB DLL an error occurred whilst attempting to register for debugging. Consequently there will be no debug output from the DOT1AG MIB DLL.

Recommended Action    Continue working with the DOT1AG MIB DLL without any debugging taking place or restart the DLL such that during initialisation there is another attempt register for debugging.

Error Message     
 
    
    
   

%L2-CFMMIB-3-NO_TRAP Unable to register for SNMP traps. Traps will not be sent regardless of trap events occurring: [chars]

Explanation    In the initialisation of the DOT1AG MIB DLL an error occurred whilst trying to register a callback function for the enabling of SNMP traps. Alternatively whilst trying to enable traps there was a failure in binding to SysDB for trap notifications.

Recommended Action    Continue working with the DOT1AG MIB DLL without any the ability to send traps when events occur or restart the DLL such that there is another attempt to register for traps.

CHDLC_EA Messages

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC EA process will restart

Explanation    An error occurred in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The cHDLC EA process will restart

Explanation    A failure occurred during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-6-ERR_IMC_MULTIPLE_NTFCNS CH[hex]: Multiple [chars] notifications received in a single batch from IM

Explanation    A batch from IM contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC EA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLC_MA Messages

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_IIR_BDL_OP The cHDLC MA failed to process a bundle IIR [chars] message on CH[hex], error: [chars]

Explanation    The chdlc_ma process failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the basecaps is out of step with the bundle configuration.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_INTF_UP_DOWN An error has occurred resulting in the interface state being UP, and the line state being DOWN on interface CH[hex]. Because keepalives are disabled the line will never come up. The situation may be resolved by shutting and no shutting the interface, or enabling keepalives.

Explanation    If keepalives are disabled and certain errors occur then the interface and line state can end up being out of step. Without keepalives enabled, SLARP has no way to recover by discovering the correct line state, so user intervention is required for a chance of recovery.

Recommended Action    shut and then no shut the problematic interface, or enable keepalives on the interface.

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_SYSMGR_SOCK_FEAT_START Startup of the cHDLC Socket feature has unexpectedly failed: [chars]

Explanation    The cHDLC socket feature unexpectedly failed to be started by sysmgr. This may mean that processes which use cHDLC sockets to send and receive packets will be unable to do so, and may not be working correctly. Symptoms would include loss of SLARP keepalive packets causing the line state to go down, loss of CDP packets and loss of LACP packets on cHDLC encapsulated interfaces.

Recommended Action    The problem can be fixed by manually starting the cHDLC Socket server process on the affected node using the command 'process start chdlc_socket location location'. The command 'show process chdlc_socket location location' will indicate the state of the process. Once the socket server process is running, no further action is required.

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC MA process will restart

Explanation    An error occurred in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The process will restart

Explanation    A failure occurred during the initialization of the process. The cHDLC MA process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_PKT_API_HANDLER Failure during the handling of an event received from the packet thread in [chars]: [chars].

Explanation    A failure occurred whilst handling an event received from the packet thread.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_PKT_HANDLER Failure during the handling of a packet event in [chars]: [chars].

Explanation    A failure occurred whilst handling a packet event.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_THREAD Failure during a cross thread operation in [chars]: [chars].

Explanation    A failure occurred during thread handling.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-6-ERR_IM_MULTIPLE_NTFCNS CH[hex]: Multiple [chars] notifications received in a single batch from Interface Manager

Explanation    A batch from Interface Manager contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC MA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLCDLL Messages

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_DEBUG_REGISTER Could not register for debug events : [chars]

Explanation    There was an error registering the cHDLC Netio debug with the debug library. No debug will be available for the cHDLC Netio DLLs.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_PKT_ENCAP Encapsulation of HDLC packet failed. Packet type-code [hex]

Explanation    The encapsulation of an HDLC packet failed for the network protocol with the ethernet type code specified. The packet has been dropped.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_TRACE_REGISTER Could not register with tracing infrastructure: [chars]

Explanation    An attempt to register with the tracing infrastructure failed. This will mean that tracing for the cHDLC Netio DLLs will not be available.

Recommended Action    *SUPPORT*

CHIPs Messages

Error Message     
 
    
    
   

%L2-CHIPs-2-error [chars]

Explanation    A high severity error has occurred in PLIM FPGA. This might result in the PLIM being reset. %s - error message

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CHNLZD_EFCM Messages

Error Message     
 
    
    
   

%L2-CHNLZD_EFCM-3-ERROR_CFG_BUFF_MAP_MEMORY Error mapping to SPA bridge controller configuration buffer

Explanation    An error has occurred in the Extended Flow Control Manager. EFCM was unable to map shared memory for debug.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHNLZD_EFCM-3-ERROR_CFG_BUFF_OPEN_MEMORY Error opening SPA bridge controller configuration buffer.

Explanation    An error has occurred in the Extended Flow Control Manager. EFCM was unable to open shared memory for debug.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHNLZD_EFCM-3-ERROR_COMM_ERR_SET_EFC_ENTRY Unable to set extended flow control calendar entry : bay([dec]) interface handle([hex]), [chars]

Explanation    An error has occurred in the Extended Flow Control Manager. An attempt to set an entry in the Flow Control calendar failed. This error indicates that messaging between the SPA process and the Jacket process failed.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHNLZD_EFCM-3-ERROR_COMM_SPA_CLIENT_INIT SPA client initialization failed during extended flow control calendar initialization, [chars]

Explanation    An error has occurred in the Extended Flow Control Manager. An attempt to set an entry in the Flow Control calendar failed. This error indicates that messaging between the SPA process and the Jacket process failed.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHNLZD_EFCM-3-ERROR_EINVAL_SET_CALENDAR_ENTRY Invalid parameters while setting extended flow control manager entry. Channel [dec] bay [dec]

Explanation    An error has occurred in the Extended Flow Control Manager. This is caused by an out of bounds Flow Control channel number or bay number trying to be used during the configuration of Flow Control for the SPA.

Recommended Action    *RECUR*

COMMS Messages

Error Message     
 
    
    
   

%L2-COMMS-3-MSG_DROPPED Unexpected error has lead to an incoming message being dropped: [chars]

Explanation    An incoming control message could not be fully processed due to an unexpected error.

Recommended Action    Restarting the process in question should result in a full resync of all data. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-MY_ID_MISMATCH Checkpoint data for this connection (id %hu) has invalid id (%hu)

Explanation    The Checkpoint table contained unexpected data. This is unexpected, and could indicate memory corruption of some sort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-MY_SAVE_FAILED Failed to save Checkpoint sequence information for connection [chars]

Explanation    The client failed to save its own sequence data to Checkpoint. If the process restarts before the save is successfully retried, remote clients may get out of sync, and data loss could occur.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-SAVE_FAILED Failed to save Checkpoint entry [hex]/[hex] on connection [chars]

Explanation    The client failed to save data to Checkpoint. If the process restarts before the save can be retried, then data loss could occur.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-4-DUPLICATE_ENTRY Duplicate Checkpoint entry for ID %hu on node [hex]

Explanation    The Checkpoint table contained a duplicate entry. This is unexpected, and likely indicates a software fault.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CPP_EXMEM Messages

Error Message     
 
    
    
   

%L2-CPP_EXMEM-6-THRESHOLD_CLEAR CPP [dec] [chars] memory recovered - [dec] percent depleted

Explanation    Exmem resource cross under its threshold

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPP_EXMEM-6-THRESHOLD_DECLARE CPP [dec] [chars] memory low - [dec] percent depleted

Explanation    Exmem resource cross over its threshold

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

cpp_sbs Messages

Error Message     
 
    
    
   

%L2-cpp_sbs-3-FATAL_ERR [chars]: Err equals [hex]

Explanation    A fatal error occurred in CPP Infra Stats Block Service which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CPP_TCAM_RM Messages

Error Message     
 
    
    
   

%L2-CPP_TCAM_RM-3-FATAL_ERR Fatal error: [chars]: Err equals [dec]

Explanation    A fatal error occurred in CPP TCAM RM which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPP_TCAM_RM-3-MSG_SEND_FAILED cpp_tcam_rm: msg: [dec], retried: [dec] time(s), failed to send, errno: [chars]

Explanation    Unable to send a message to the CPP TCAM RM server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPP_TCAM_RM-3-NONFATAL_ERR Nonfatal error: [chars]: Err equals [dec]

Explanation    This is a error message in the CPP TCAM RM to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPP_TCAM_RM-6-INFO_MSG Info: [chars]

Explanation    This is an informational message in the CPP TCAM RM.

Recommended Action    No action is required.

CPPHA Messages

Error Message     
 
    
    
   

%L2-CPPHA-3-CDMDONE CPP [dec] microcode crashdump creation completed

Explanation    CDM has completed crashdump creation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-FAILURE CPP [dec] failure [chars] detected

Explanation    A CPP failure has been detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-FAULT CPP [dec] fault:[chars] det:[chars] class:[chars] sev:[chars] idx:[dec] cppstate:[chars] res:[chars] flags:[hex] cdmflags:[hex]

Explanation    A CPP failure has been detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-FAULTCRASH CPP [dec] unresolved fault detected, initiating crash dump.

Explanation    A CPP failure has been detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-FAULTRATE CPP [dec] fault:[chars] det:[chars] class:[chars] sev:[chars] idx:[dec] cppstate:[chars] res:[chars] flags:[hex] cdmflags:[hex]

Explanation    A CPP fault has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-INITFAIL CPP [dec] initialization failed - [chars] ([hex])

Explanation    A CPP initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CPPHA-3-NOCDM CPP [dec] CDM not running.

Explanation    A CPP failure has been detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

cpposlib Messages

Error Message     
 
    
    
   

%L2-cpposlib-3-CLEAN_NOTIFY Failed to cleanup: ([chars]).

Explanation    A function failed to cleanup.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-cpposlib-3-ERROR_NOTIFY [chars] encountered an error

Explanation    A process encountered error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-cpposlib-3-INIT_NOTIFY Failed to initialize: ([chars]).

Explanation    A function failed to initialize.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

d1qnetio Messages

Error Message     
 
    
    
   

%L2-d1qnetio-3-CHAIN_BUILDER_FAILED The chain build function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to set up an interface. Software forwarding VLAN functionality on the affected node may be impaired.

Recommended Action    It may help to restart the VLAN EA process on the affected node, with process restart vlan_ea location [location]. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-IDB_NOT_FOUND The Netio IDB associated with handle [hex] could not be found

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to process a message sent to a particular interface because the interface does not exist in NetIO. Software forwarding VLAN functionality on the affected interface may be impaired. The interface can be determined from its handle with show im chains ifhandle [handle].

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-REGISTRY_CREATION_FAILED Unable to create the protocol registries during capsulation initialization

Explanation    The 802.1Q NetIO component could not necessary data structures during its initialization. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-SUBBLOCK_REG_FAILED 802.1Q Netio failed to register the dot1q_ether subblock (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to initialise on the specified node. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-TRACE_INIT_ERROR A error occurred during trace initialization, err: [chars]

Explanation    The 802.1Q NetIO component encountered an error during trace buffer initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-CHAIN_UNBUILDER_FAILED The chain unbuild function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up an interface. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEBUG_INIT_ERROR An error occurred during debug initialization (error: [chars])

Explanation    The 802.1Q NetIO component encountered an error during debug initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEVCTL_NOT_SUP Unsupported NetIO devctl code ([dec]) received

Explanation    The 802.1Q NetIO component received an unexpected message. The message has been ignored. This may indicate that there is a version mismatch among the VLAN components.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-TERM_FAILED 802.1Q NetIO termination failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DIV2_DM Messages

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INFO driver manager: service degrading error, reason equals [chars]

Explanation    Driver manager encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INIT Driver manager: init. error encountered, reason equals [chars]

Explanation    Driver manager encountered an error and is not able recover from it. A reason text will be supplied. Call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-NO_MEM Driver manager: memory allocation error for [dec] bytes

Explanation    Driver manager encountered a fatal memory allocation error

Recommended Action    Reduce other system activity (e.g. by killing non-essential processes) to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

DRIVERS_UTIL Messages

Error Message     
 
    
    
   

%L2-DRIVERS_UTIL-3-TUPLE_READ_ERROR [chars]: Tuple read failed with error [hex] [chars]

Explanation    An error occurred when trying to read the tuple from sysdb.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

DWDM Messages

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL dwdm: fatal error encountered, reason equals [chars]

Explanation    dwdm encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL_2 dwdm: fatal error encountered, reason equals [chars], errno equals [dec]

Explanation    dwdm code encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-INFO dwdm: service degrading error, reason equals [chars]

Explanation    The dwdm encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-NOT_YET_IMPLEMENTED dwdm: this function [chars] is not yet implemented

Explanation    dwdm, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-4-FORCED_MAINTENANCE Port id: [chars], Forced Maintenance: [chars], Reason: [chars]

Explanation    If Forced Maintenance has started at a port, it means that the port was put into Transport Admin State of 'maintenance' when this activity was actually disallowed for it. Forced Maintenance ends when, either maintenance at the port is allowed again by the administrator, or when the Transport Admin State is changed back to some other rather than 'maintenance'.

Recommended Action    A forced maintenance activity implies that there may be loss of traffic. A port should not be put into maintenance state (unless its absolutely necessary) if maintenance is disabled by the administrator. That status can be checked using show interfaces CLI.

Error Message     
 
    
    
   

%L2-DWDM-5-MAINTENANCE_DISABLED Port id: [chars], [chars]

Explanation    When optical layer maintenance for an interface is disabled by the administrator, an hourly syslog notification is logged regarding this, until maintenance is enabled back again. One should not put the port into OOS-MT state when maintenance is disabled, otherwise it will lead to a forced maintenance activity and there might be loss of traffic.

Recommended Action    Do not change the transport admin state of the port to maintenance unless absolutely required.

Error Message     
 
    
    
   

%L2-DWDM-5-SRLG_OVERFLOW Port id: [chars], The number of SRLGs for this port is too high - only the first [dec] have been recorded

Explanation    Maximum 100 SRLGs can be configured per DWDM port at the CRS. If some application like CTC has more than this number to configure, it indicates this situation by configuring the 101st value with a positive integer. The above ios_msg gets logged in this scenario.

Recommended Action    It is just a notification.

Error Message     
 
    
    
   

%L2-DWDM-6-CLEAR_COUNTERS Cleared counters on [chars]

Explanation    Counters on a dwdm controller has been cleared by the user. This message is for information only.

Recommended Action    None.

E3EGRESSQ Messages

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_MEM_ALLOC Failed to allocate [dec] bytes from [chars] ([chars])

Explanation    The process failed to allocate memory. Most likely, all system memory has been allocated already.

Recommended Action    Verify that the card has at least the minimum supported memory configuration. Use the 'show memory' and 'show processes memory location' commands to identify what processes use the memory. If memory usage for a process seems abnormal, restarting the process using the command 'process restart' could be a workaround. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_THREAD_MUTEX_LOCK Failed to lock mutex

Explanation    The process failed to obtain a software mutex lock. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_THREAD_MUTEX_UNLOCK Failed to unlock mutex

Explanation    The process failed to obtain a software mutex unlock. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-MEM_MAP [chars] (size [hex] addr [hex]) - [chars]

Explanation    The process could not map the egress asic SDRAM into its memory space.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The egress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_ALLOC_SHMWIN Failed to open shared memory window [chars] ([chars])

Explanation    The process failed to open the specified shared memory window. This problem can be caused by a lack of system memory.

Recommended Action    Verify that the card has at least the minimum supported memory configuration. Use the 'show memory' and 'show processes memory location' commands to identify what processes use the memory. If memory usage for a process seems abnormal, restarting the process using the command 'process restart' could be a workaround.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_FREE Failed to free [chars] ([chars])

Explanation    The process failed to free memory. This is likely a symptom of software corruption. The system may be in an unstable condition. The software failed to free memory, and this can eventually lead to an out-of-memory condition.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_MQS_COUNTER_THR_EXCEEDED MQS counter utilization [dec] exceeds the high threshold of [dec]

Explanation    The multicast counter utilization has exceeded the high threshold. This may impact the delay and/or jitter of multicast traffic egressing out of this line card. The maximum counters available are 2048.

Recommended Action    Reduce the multicast traffic rate sent to this line card.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MUTEX_INIT Failed to [chars] ([chars])

Explanation    The process failed to initialize a software mutex. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to eventual data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MUTEX_REVIVE Failed to register for mutex revival ([chars])

Explanation    The process failed to register for mutex revival. In the event of a software error where another process would crash while holding a shared mutex, this process would not self-recover. This warning does not cause any degradation in the router operation. The warning simply means that a particular error recovery mechanism will not be effective.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_PLATFORM_INFO Failed to obtain platform info for [chars] ([chars])

Explanation    The process failed to obtain information on the specified shared memory window. This will prevent proper initialization and operation multicast feature. This indicates a software error condition.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E3EGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-MEM_INVALID_MQS_COUNTER_MAXTHR MQS max threshold [dec] is not in supported limit (1 - 2048)

Explanation    The new multicast counter max-threshold is crossing platform supported limit.

Recommended Action    Re-configure with different max-threshold satisfying supported limit.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-MEM_INVALID_MQS_COUNTER_MINTHR MQS min threshold [dec] is not in supported limit (1 - 2048)

Explanation    The new multicast counter min-threshold is crossing platform supported limit.

Recommended Action    Re-configure with different min-threshold satisfying supported limit.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-MEM_MQS_MAXTHR_NOT_MATCHING_CURR_MINTHR MQS max-th [dec] is lesser than current min-th [dec]

Explanation    The new multicast counter max-threshold is lesser than current min-threshold.

Recommended Action    Re-configure with different max-threshold greater than current min-threshold.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-MEM_MQS_MINTHR_NOT_MATCHING_CURR_MAXTHR MQS min-th [dec] is greater than current max-th [dec]

Explanation    The new multicast counter min-threshold is greater than current max-threshold.

Recommended Action    Re-configure with different min-threshold less than current max-threshold.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-6-ERR_MEM_MQS_COUNTER_THR_NORMAL MQS counter utilization [dec] within the low threshold of [dec]

Explanation    The multicast counter utilization has eased off to below the low threshold.

Recommended Action    No action required.

E3INGRESSQ Messages

Error Message     
 
    
    
   

%L2-E3INGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The ingress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3INGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E3INGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

E5EGRESSQ Messages

Error Message     
 
    
    
   

%L2-E5EGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The egress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-ERR_MEM_MQS_COUNTER_THR_EXCEEDED MQS counter utilization [dec] exceeds the high threshold of [dec]

Explanation    The multicast counter utilization has exceeded the high threshold. This may impact the delay and/or jitter of multicast traffic egressing out of this line card. The maximum counters available are 16384.

Recommended Action    Reduce the multicast traffic rate sent to this line card.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-ERROR [chars]: error [hex]

Explanation    The e5 egress queue driver encountered an internal error. The router may/may not continue to function normally.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E5EGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-MEM_INVALID_MQS_COUNTER_MAXTHR MQS max threshold [dec] is not in supported limit (1 - 16384)

Explanation    The new multicast counter max-threshold is crossing platform supported limit.

Recommended Action    Re-configure with different max-threshold satisfying supported limit.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-MEM_INVALID_MQS_COUNTER_MINTHR MQS min threshold [dec] is not in supported limit (1 - 16384)

Explanation    The new multicast counter min-threshold is crossing platform supported limit.

Recommended Action    Re-configure with different min-threshold satisfying supported limit.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-MEM_MQS_MAXTHR_NOT_MATCHING_CURR_MINTHR MQS max-th [dec] is lesser than current min-th [dec]

Explanation    The new multicast counter max-threshold is lesser than current min-threshold.

Recommended Action    Re-configure with different max-threshold greater than current min-threshold.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-MEM_MQS_MINTHR_NOT_MATCHING_CURR_MAXTHR MQS min-th [dec] is greater than current max-th [dec]

Explanation    The new multicast counter min-threshold is greater than current max-threshold.

Recommended Action    Re-configure with different min-threshold less than current max-threshold.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-6-ERR_MEM_MQS_COUNTER_THR_NORMAL MQS counter utilization [dec] within the low threshold of [dec]

Explanation    The multicast counter utilization has eased off to below the low threshold.

Recommended Action    No action required.

E5INGRESSQ Messages

Error Message     
 
    
    
   

%L2-E5INGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The ingress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5INGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E5INGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

edge_l2fwd_rewrite Messages

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-FM_ADD_FEAT_ERR [chars], Failed to add feature for [chars], err: [chars]

Explanation    edge_l2fwd_rewrite failed to add specific feature in FM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-FM_DEL_FEAT_ERR [chars], Failed to del feature for [chars], err: [chars]

Explanation    edge_l2fwd_rewrite failed to delete specific feature in FM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-FWD_FEAT_NOT_SUPPORTED [chars]: [chars] is not supported on E3 Linecards

Explanation    The feature is not supported on E3 Linecards.

Recommended Action    Please contact the TAC representative for hardware information on which this feature is supported

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-FWD_MEMMGR_READ_ERR [chars], Failed to read [chars] from FWD MemMgr, err: [chars]

Explanation    edge_l2fwd_rewrite failed to read adj counters/PLU/TLU through FWD Memory manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-HFA_CREATE_ERR [chars],Failed to create gather index in HFA

Explanation    edge_l2fwd_rewrite failed to create gather index in HFA

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-HFA_PROG_ERR [chars],Failed to program [chars] ucast in HFA

Explanation    edge_l2fwd_rewrite failed to program feature specific ucast in HFA

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-HFA_REGISTER_ERR [chars],Unable to open connection with HFA

Explanation    edge_l2fwd_rewrite Connection open with the HFA failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-INSERT_ENCAP_STRING_ERR [chars], Insert encap string failed for Ifhandle equals [hex] err:[chars]

Explanation    edge_l2fwd_rewrite failed while removing the encap string

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-MEM_REG_ERR [chars], Error while registering with Forwarding Memory Manager

Explanation    edge_l2fwd_rewrite Registration with the forwarding Memmgr Failed !

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-PLU_FREE_ERR [chars],PLU free failed, error:[chars]

Explanation    edge_l2fwd_rewrite Failed to free PLU though the forwarding Memory Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-PLU_MALLOC_ERR [chars], Failed to allocate memory for the PLU Leaf

Explanation    edge_l2fwd_rewrite Forwarding memory module failed to allocate memory for the PLU leaf

Recommended Action    Please get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-PLU_WRITE_ERR [chars],[dec],PLU write error:[chars]

Explanation    edge_l2fwd_rewrite Failed while writing into the PLU though the forwarding Memory Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-REMOVE_ENCAP_STRING_ERR [chars], remove encap string failed OI equals [hex] err:[chars]

Explanation    edge_l2fwd_rewrite failed while removing the encap string

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-RM_INIT_ERR [chars], [dec] error, reason:[chars]

Explanation    edge_l2fwd_rewrite Encap Resource Manager Initialisation error

Recommended Action    Pls get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-TLU_FREE_ERR [chars],TLU free error:[chars]

Explanation    edge_l2fwd_rewrite Failed to free TLU through forwarding Memory manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-TLU_MALLOC_ERR [chars], Failed to allocate memory for the TLU Leaf

Explanation    edge_l2fwd_rewrite Forwarding memory module failed to allocate memory for the TLU leaf

Recommended Action    Pls get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-TLU_SIZE_ERR [chars], Invalid TLU write size, TLU size:[dec], Write Size:[dec]

Explanation    edge_l2fwd_rewrite failed to write to TLU as the write size is not less than the actual TLU size

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-TLU_WRITE_ERR [chars],[dec],TLU write error:[chars]

Explanation    edge_l2fwd_rewrite Failed while writing into the TLU though the forwarding Memory manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-UIDB_READ_ERR [chars],Uidb read failed - err: [chars]

Explanation    edge_l2fwd_rewrite Uidb read failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-UIDB_SET_ERR [chars],Uidb set failed for xconnid:[dec], err: [chars]

Explanation    edge_l2fwd_rewrite Uidb set failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-XBMA_ADD_ERR [chars], Failed to add mcast entry, err: [chars]

Explanation    edge_l2fwd_rewrite failed to add mcast entry in XBMA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-XBMA_CONN_ERR [chars], Failed to connect to XBMA server, err: [chars]

Explanation    edge_l2fwd_rewrite failed to connect to XBMA server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-XBMA_DEL_ERR [chars], Failed to del mcast entry, err: [chars]

Explanation    edge_l2fwd_rewrite failed to delete mcast entry in XBMA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_rewrite-2-XBMA_INIT_ERR [chars], Failed to initialize XBMA library, err: [chars]

Explanation    edge_l2fwd_rewrite failed to initialize XBMA lib.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

edge_l2fwd_table Messages

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_DEL_ERR [chars], Failed to delete [chars] for [chars] in FAD

Explanation    edge_l2fwd_table failed to delete l2fwd lookup entry in FAD

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_INIT_ERR [chars], Failed to initialize FAD, reason:[chars]

Explanation    edge_l2fwd_table FAD module failed to get initialized.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_INSERT_ERR [chars], Failed to insert lookup entry for [chars] in FAD

Explanation    edge_l2fwd_table failed to insert l2fwd lookup entry in FAD

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_REGION_PROG_ERR [chars], Failed to program [chars] region in FAD

Explanation    edge_l2fwd_table failed to program TCAM region in FAD. The region is specific to feature (L2TPv3/VPLS etc.)

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_TCAM_FORMAT_PROG_ERR [chars], Failed to program [chars] TCAM format in FAD

Explanation    edge_l2fwd_table failed to program feature specific TCAM format in FAD layer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FAD_UPDATE_ERR [chars], Failed to update lookup entry for [chars] in FAD

Explanation    edge_l2fwd_table failed to update l2fwd lookup entry in FAD

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-FM_CONFIG_ERR [chars], Failed to set [chars] feature config in FM

Explanation    edge_l2fwd_table failed to set feature specific config processing in FM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-PLU_MALLOC_ERR [chars], Failed to allocate memory for the PLU Leaf

Explanation    edge_l2fwd_rewrite Forwarding memory module failed to allocate memory for the PLU leaf

Recommended Action    Pls get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-PLU_WRITE_ERR [chars],[dec],PLU write error:[chars]

Explanation    edge_l2fwd_rewrite Failed while writing into the PLU though the Forwarding Memory Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-reg_err [chars],[dec] Table registration failed ! Table type:[chars], direction:[dec]

Explanation    edge_l2fwd_table failed to register the memory requirement and populate the memory handle

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-TABLE_MALLOC_ERR [chars], Failed to allocate memory for the Table: [chars]

Explanation    edge_l2fwd_rewrite Forwarding memory module failed to allocate memory for the Table

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-TLU_MALLOC_ERR [chars], Failed to allocate memory for the TLU Leaf

Explanation    edge_l2fwd_rewrite Forwarding memory module failed to allocate memory for the TLU leaf

Recommended Action    Pls get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-2-TLU_WRITE_ERR [chars],[dec],TLU write error:[chars]

Explanation    edge_l2fwd_rewrite Failed while writing into the TLU though the forwarding memory manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-edge_l2fwd_table-3-ERR [chars], [dec] error, reason:[chars]

Explanation    edge_l2fwd_table generic error

Recommended Action    Pls get the information specified under the component required_info and call your Cisco technical support representative and provide the representative with the gathered information with this error message text.

EGRESSQ_HW_DLL Messages

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-ENQ_PKT_LOGIC_ERROR Sharq ENQ packet logic error occurred, shq_enq_reg_debug_mux [hex]

Explanation    Egress Queue Manager encountered a ENQ packet logic error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FAIL_TO_GET_BP_MAP_FROM_PLIM_AISC Failed to get backpressure map from Plim ASIC [dec]. reason [chars]

Explanation    Sharq driver invoke Plim ASIC dll to retrieve the per port backpressure map but failed.

Recommended Action    Please check Plim ASIC and related driver process status, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FCRAM_BIST_FAILURE FCRAM BIST failed, channel: [dec], count: [dec], error_addr: [hex]

Explanation    Egress Queue Manager encountered a FCRAM BIST failure error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FORWARD_PACKET_TO_UNALLOCATED_QUEUE Forward packets sent to unallocated egress queue [dec]. (queue state: [chars], queue length: [dec] bytes)

Explanation    Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active, or asic reset or linecard reload.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10 MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-HW_ERROR Tor HW error: [chars]

Explanation    Egress Queue Manager encountered a HW error. This is a severe error and ASIC will be reset by the driver.

Recommended Action    No action is required. The driver will perform asic recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-HW_ERROR [chars]

Explanation    Egress Queue Manager encountered a HW error. This is a severe error and ASIC will be reset by the driver.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-IO_ERROR [chars] [chars] access error. [chars]

Explanation    Egressq ASIC encountered a read or write access error or its Host Processor Interface block has gone down and come back up. The access error is classified into two classes - software or hardware. Hardware access error refers to an error at the PCI link used to connect the ASIC to the host processor. Software access error refers to the error, caused by a un-discovered software bug, which makes software to perform un-supported access to an ASIC location, like writing to a read-only location.

Recommended Action    If the message indicated this is a hardware access error, software will have automatically taken action to recover from the error. If hardware access error does not recur, no other action is required. If the hardware access error persists or it is a software access error, copy the System Message exactly as it appears on the console or in the system log, enter command 'show tech-support controller egressq location ', report the error to your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-NON_ZERO_Q0_COUNTER EgressQ detected packets sent to Illegal queue (counter value [hex])

Explanation    Egressq driver detected that packets are sent to Q0, which is invalid queue.

Recommended Action    If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-QUEUE_STUCK EgressQ Stuck condition detected (PLIM link [dec], link trained: [chars], Port [dec], Group [dec], Queue [dec], Queue state: [chars])

Explanation    Egressq driver detects the queue stuck condition (CSCsj48554). There is no packet output from one or more of the PLIM links and the queue length for related queue(s) is building up.

Recommended Action    By default, driver will perform the asic soft reset after detecting queue stuck condition. If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-QUEUE_STUCK_STATUS_INFO ASIC Tor status: [chars]

Explanation    Log the key asic registers when a queue stuck condition was detected.

Recommended Action    No action is required. The driver will perform asic recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-RLDRAM_BIST_FAILURE RLDRAM BIST test failed

Explanation    Egress queueing ASIC encountered a failure when doing BIST testing on its external Reduced-Latency-DRAM (RLDRAM). Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. The linecard is automatically reloaded. If the error persists, replace the Modular Service Card (MSC).

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-SBE_THRESHOLD_EXCEED Single Bit Error rate exceeded configured high threshold value: [chars]

Explanation    Egressq SBE rate has exceeded the configured high threshold value. This is a self healing error condition.

Recommended Action    No action is required. It is a self healing error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-UNALLOCATED_QUEUE_NOT_EMPTY Packets present in unallocated egress queue [dec]. (queue state: [chars], queue length: [dec] bytes)

Explanation    Egressq driver detected that packets were present in an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active. This situation should normally not happen, but may possibly happen during transient conditions when egress queue information is being updated (for e.g. on SPA OIR). During this brief time period, one or few packets may be sent to an incorrect queue.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10 MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-UNALLOCATED_QUEUE_NOT_EMPTY Packets sent to unallocated egress queue [dec]. (queue size [dec] bytes)

Explanation    Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active. This situation should normally not happen, but may possibly happen during transient conditions when egress queue information is being updated (for e.g. on SPA OIR). During this brief time period, one or few packets may be sent to an incorrect queue.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10 MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-6-QDR_BIST_FAILURE QDR BIST failed, [chars]

Explanation    Egress Queue Manager encountered a QDR BIST failure error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_EVM_FAIL EVM error : [chars] reason : [chars]

Explanation    An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to incompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to incompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_LWM_FAIL LWM message send failed: [chars] reason: [chars]

Explanation    An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EGRESSQ Messages

Error Message     
 
    
    
   

%L2-EGRESSQ-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-QUEUE_STUCK EgressQ Stuck condition detected (PLIM link [dec], Port [dec], Group [dec], Queue [dec], Len [dec])

Explanation    Egressq driver detects the queue stuck condition (CSCsj48554). There is no packet output from one or more of the PLIM links and the queue length for related queue(s) is building up.

Recommended Action    By default, driver will perform the asic soft reset after detecting queue stuck condition. If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_CLIENT_REG Client registration failed: [chars] reason: [chars]

Explanation    An internal error was detected while clients are registering to Egressq process.

Recommended Action    No action is required. Clients will automatically retry to connect to Egressq. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_EVM_FAIL EVM error : [chars] reason : [chars]

Explanation    An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to incompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_LWM_FAIL LWM message send failed: [chars] reason: [chars]

Explanation    An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ELO_COMMON Messages

Error Message     
 
    
    
   

%L2-ELO_COMMON-3-SYSMGR_FAIL Unable to signal that process is exiting: [chars]

Explanation    The process has failed to inform System Manager that it is shutting down. The process will exit anyway, but it is possible that any configuration entered will not cause SysMgr to restart the process. In this case, a timeout will occur when committing configuration, and the config will fail to apply.

Recommended Action    If configuration fails to apply, recommitting it should correct the issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-BLOCK_UNTIL_ACTIVE Unable to block on sysmgr on the node which is in standby role: [chars]

Explanation    The process failed to block on System Manager on a node which is in standby role and wait for the node to go active.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-PROC_READY_FAILED Unable to signal process ready: [chars]

Explanation    The process failed to inform System Manager that it is ready, and will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-VERIFY_CLEANUP_FAILED Failed to cleanup common verification module: [chars]

Explanation    Whilst exiting, an error was encountered cleaning up a common module. The process will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-VERIFY_INIT_FAILED Failed to initialize common verification module: [chars]

Explanation    The process has failed to initialize a module, and will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ELO Messages

Error Message     
 
    
    
   

%L2-ELO-3-BAD_CONFIG Invalid configuration values applied: [chars]

Explanation    Invalid configuration has been incorrectly applied. This can potentially indicate a recent change in acceptable configuration values, or an internal fault.

Recommended Action    Check that all configuration is within the acceptable ranges for the current version of the software and the installed hardware. If the error persists, and all values are within range, copy and save this message, and call your technical support representative for assistance.

Error Message     
 
    
    
   

%L2-ELO-3-COULD_NOT_GET_NODEID Ethernet Link OAM Daemon failed to determine the node it is running on: [chars]

Explanation    The Ethernet Link OAM Daemon failed to determine the ID of the node on which it is running. It will exit, and should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-COULD_NOT_REMOVE_CAPS Failed to remove PFI caps from interface 'CH[hex]': [chars]

Explanation    The Ethernet Link OAM Daemon failed to clean up a caps entry in PFI for the named interface. This error is not fatal in itself, although it may prevent OAM from being re-enabled on the given interface until the problem is resolved.

Recommended Action    Read the error message, and attempt to resolve any issue that may have caused it. Restarting the Ethernet Link OAM Daemon will then allow it to resynchronize with PFI and cleanup the dangling caps. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-DAEMON_INIT_FAILED Ethernet Link OAM Daemon failed to initialize [chars]: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize correctly, and will now exit. It should be restarted by SysMgr.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-ERRDIS_FAILED CH[hex]: failed to Error-Disable the port: [chars]

Explanation    The port should have been Error Disabled, but an unexpected error has prevented it from being shut down. The port is still up, and will not be disabled.

Recommended Action    Shutdown the port manually if it is still desirable to bring it down. Otherwise, no action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-EXITING Ethernet Link OAM Daemon failed to process events: [chars]

Explanation    The Ethernet Link OAM Daemon failed to process an event, and will now exit. It should be restarted by SysMgr, allowing it to resynchronize its internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-INTF_INIT_FAIL [chars]: Failed to initialise the interface: [chars]

Explanation    The Ethernet Link OAM Daemon was unable to initialise the specified interface. This is likely caused by a memory resource allocation error. The exact error can be found in the 'show ethernet oam interface' command.

Recommended Action    Un-configure and re-configure the interface. If that does not resolve the problem, restarting the process will cause a retry of the initialisation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-LOOPBACK_SET_FAILED [chars]: Failed to change Loopback state in the platform: [chars]

Explanation    An attempt to change the Loopback state of an interface failed. This will either be in response to a local command to change the remote peer's Loopback state, or a command on the remote peer to put this interface in slave loopback mode.

Recommended Action    Retry the Loopback operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-LWM_REPLY_ERROR Failed to send an LWM reply message in the Ethernet Link OAM Daemon: [chars]

Explanation    The LWM subsystem indicated an error when trying to send a reply from the packet thread to the main thread in the Ethernet Link OAM Daemon. The operation will not be retried - the internal state of Ethernet Link OAM may not match the global system state.

Recommended Action    Try restarting the Ethernet Link OAM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-PACKET_LOCK_ERROR Failed to perform a [chars] operation: [chars]

Explanation    An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behavior should be observed.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-ELO-3-PFI_CLEANUP_FAILED_ATTR_UNREGISTER Failed to unregister with IMC for attribute notifications. Error message: [chars]

Explanation    The Ethernet Link OAM daemon was unable to unregister for interface notifications with IM. The Ethernet Link OAM daemon may continue to receive notifications for interfaces it is not longer configured on.

Recommended Action    Restart the Ethernet Link OAM daemon process. This should cause a re-registration with IM, ensuring the correct interfaces are registered for notifications. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-RECEIVE_OAMPDU_FAILED Failed to successfully receive an OAMPDU from SPIO: [chars]

Explanation    The Ethernet Link OAM Daemon was unable to receive an OAMPDU successfully from SPIO. This could be due to the OAMPDU not being received properly or being corrupt such that the OAMPDU can't be properly processed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-RESYNC_END_ERROR Failed to signal the end of a resync with SPIO: [chars]

Explanation    The Ethernet Link OAM Daemon failed to resync with SPIO upon startup or a process restart. This is due to an LWM failure when sending a message between the main and packet threads within Ethernet Link OAM daemon. The operation will not be retried - the internal state of Ethernet Link OAM may not match the global system state.

Recommended Action    Try restarting the Ethernet Link OAM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-SPIO_MODULE_INIT Failed to register for packet IO on initialisation: [chars]

Explanation    The Ethernet Link OAM Daemon was unable to register the module to send and receive packets. This is likely caused by a memory resource allocation error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-CHKPT_SAVE_FAILED CH[hex]: failed to save checkpoint entry: [chars]

Explanation    The Ethernet Link OAM Daemon failed to save the checkpoint entry for the given interface. Although this error is not immediately fatal, information will be lost if the process restarts before successfully saving its checkpoint data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-DAEMON_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup [chars]: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup correctly. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-EFD_SHUTDOWN_ERROR Failed to shut down interface CH[hex]: [chars]

Explanation    A failure occurred when attempting to shut down an interface using EFD after a fault condition was detected on the interface. This event was triggered by either a change in stateful condition of the link, a process restart or a change in configuration that enabled EFD on a particular action. This will result in the interface remaining up, when it should be shut down.

Recommended Action    If the error is the result of a configuration change, remove and re-apply the configuration. If this does not work the error may be cleared by restarting the ethernet_link_oam_daemon process on the node where the error is occurring. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-INVALID_PLATFORM_EVENT_IFH Platform event triggered on interface 'CH[hex]' for which OAM is not configured

Explanation    The platform has triggered an event for an interface that has not been configured for Ethernet Link OAM. This indicates a bug in the software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-INVALID_PLATFORM_EVENT_TYPE An unknown event of type '[hex]' has been triggered by the platform

Explanation    The platform has triggered an event that is not recognized. This is most likely due to a bug in the platform layers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-LOOPBACK_FAILED Ethernet Link OAM Daemon has failed to initiate loopback mode with a remote peer

Explanation    The Ethernet Link OAM Damon has failed to initiate loopback mode. Loopback mode is unavailable until the issue is resolved.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-NOT_IN_LOOPBACK [chars]: Unable to exit Slave Loopback mode as requested, because we're not currently in loopback mode

Explanation    A request has been made by the remote peer to stop Slave loopback mode. However, we are not currently in Slave loopback mode. This indicates that the remote peer is out of sync with our current state.

Recommended Action    Start slave Loopback mode before attempting to stop it.

Error Message     
 
    
    
   

%L2-ELO-4-PFI_ERROR CH[hex]: [chars] notification received from PFI, but interface does not have OAM configured

Explanation    Unexpected updates have been received by the Ethernet Link OAM Daemon regarding interfaces on which OAM is not configured. This indicates that a resync is required between the OAM process and PFI.

Recommended Action    Restart the Ethernet Link OAM Daemon on the affected node. This will force a resync of the state with PFI. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-SEND_FAILED [chars]: Failed to send a [chars] message: [chars]

Explanation    Failed to send a message out of the given interface. The message has been lost, and will not be delivered to the remote peer.

Recommended Action    Resynchronization mechanisms should ensure subsequent messages are correctly sent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-6-CPU_STARVED Ethernet Link OAM Daemon has been unable to send heartbeats for [unsigned long long int] ms

Explanation    The Ethernet Link OAM Daemon has been blocked or starved of CPU time. As a result, it will not have been able to send out periodic heartbeats regularly, potentially causing OAM sessions to drop. The problem is likely due to unusually high load on the system.

Recommended Action    Identify any potential high CPU users, and reduce their impact. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_CAPABILITIES_CONFLICT [chars]: Configuration conflict

Explanation    Discovery mode cannot complete due to a conflict in the required configuration of the remote peer.

Recommended Action    Ensure that the configuration requirements on this interface match the configuration of the remote OAM peer.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_DISCOVERY_TIMEOUT [chars]: OAM discovery failed to complete in the specified time

Explanation    Discovery mode has been ongoing for the configured timeout, but no suitable response has been received from the remote peer.

Recommended Action    Ensure the remote OAM peer is correctly configured and that the link is up.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_CRITICAL_EVENT [chars]: Remote critical event detected

Explanation    The remote peer has indicated a critical event.

Recommended Action    No specific IOS-XR action needs to be performed.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_DYING_GASP [chars]: Remote dying gasp detected, with reason: [chars]

Explanation    The remote peer has indicated a dying gasp. This means that the remote peer is coming down.

Recommended Action    Restart the remote peer.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_LINK_FAULT [chars]: Remote link fault detected

Explanation    The remote peer has indicated that a link fault has occurred. This indicates a uni-directional link.

Recommended Action    Check the wiring between the two interfaces.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_LOOPBACK [chars]: OAM [chars] loopback has been [chars] on the interface

Explanation    The OAM session has either entered or exited local or remote loopback. If loopback has been entered then traffic flow will be disrupted until it is exited at which point normal functionality will resume.

Recommended Action    None. This is an informational message.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_SESSION_DOWN [chars]: OAM session has gone down

Explanation    The OAM session has ended. Either it has been deconfigured, or no response has been received from the OAM peer in the configured time interval.

Recommended Action    Check that the remote peer is correctly configured still. If it is, then a large number of packets may be being dropped on the link.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_SESSION_UP [chars]: OAM session has come up

Explanation    The OAM session has been fully established, and regular heartbeat messages are being sent and received.

Recommended Action    None. This is an informational message.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_THRESHOLD_BREACHED [chars]: [chars] [chars] threshold breached

Explanation    A threshold has been breached in the hardware. This is an indication of a deteriorating link.

Recommended Action    No specific IOS-XR action needs to be performed.

Error Message     
 
    
    
   

%L2-ELO-6-LOOPBACK_CANCEL [chars]: Cancelling loopback mode as our MAC is lower than the remote MAC

Explanation    An attempt has been made to start loopback mode from both peers simultaneously. As per the IEEE 802.3 OAM specification, this OAM client has cancelled the request as the local MAC address is lower than the remote MAC address.

Recommended Action    Retry the Loopback operation from this peer once the remote loopback session on the remote peer has been terminated.

Error Message     
 
    
    
   

%L2-ELO-6-MISCONFIGURED_INTERFACE The profile configuration from profile '[chars]' cannot be applied as the platform does not support all the configured values: [chars]

Explanation    A profile can be configured that has configuration parameters that are not supported for all interfaces on the router. If that profile is later attached to an interface for which not all its values are supported, this message is generated. The interface will use the default values for any parameter that is out of range. The configuration parameters that may not be supported are support for remote loopback and support for link monitoring events. Further, the window size of a link monitor event must be a multiple of the interface's statistics' poll interval.

Recommended Action    Nothing need be done if the default values are acceptable for the invalid parameters. Otherwise, modify the profile to contain only configuration that is supported for the interfaces to which it is attached, or use an alternate profile for this interface.

Error Message     
 
    
    
   

%L2-ELO-6-MISWIRED [chars]: Mis-wiring detected

Explanation    The Mis-Wiring Detection feature of Ethernet Link OAM has detected a mis-wiring situation. Mis-wiring occurs when the TX wire of an interface is not connected to the same remote interface as the RX wire.

Recommended Action    Check the wiring of the specified interface. By setting the mis-wiring action to 'log', and using the packet debugging facility of Ethernet Link OAM ('debug ethernet oam packets'), the MAC addresses of the source of packets can be used to identify where the links are.

Error Message     
 
    
    
   

%L2-ELO-6-NO_PROFILE Profile '[chars]' is not configured, but has been attached to an interface

Explanation    A profile has been attached to an interface. However, that profile has not yet been configured. Until the named profile is created, the interface will use the default profile configuration.

Recommended Action    Create the specified profile, or remove the configuration associating the profile with the interface.

Error Message     
 
    
    
   

%L2-ELO-6-REMOTE_MASTER_LEFT_LOOPBACK [chars]: Local client in Slave Loopback, and remote Master has abruptly left Loopback mode. Exiting Slave loopback locally

Explanation    While running the link in OAM Loopback mode, with the local peer as the Slave, the Master peer abruptly ended Loopback mode without first informing this peer to end it. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-REMOTE_SLAVE_LEFT_LOOPBACK [chars]: Remote client has abruptly left Slave loopback mode. Exiting loopback state

Explanation    While running the link in OAM Loopback mode, with the local peer as the Master, the Slave peer abruptly ended Loopback mode without being told to do so by this peer. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-UNEXPECTED_LOOPBACK_STATE [chars]: An unexpected multiplexer and parser state have been received from the remote peer.

Explanation    While running the link in OAM Loopback mode the local peer received an unexpected multiplexer and parser state combination from the remote peer. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-UNEXPECTED_STATE A variable response from the remote peer contained invalid state.

Explanation    Whilst parsing a variable response packet an invalid state was found. This could be an indication of a faulty implementation on remote peer.

Recommended Action    No specific IOS-XR action needs to be performed.

ELOGM Messages

Error Message     
 
    
    
   

%L2-ELOGM-4-DEBUG_CLEANUP_FAILED Ethernet Link OAM Global Manager failed to cleanup debug: [chars]

Explanation    Whilst exiting, the Global Manager failed to cleanup the debug module. The process will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-DEBUG_INIT_FAILED Ethernet Link OAM Global Manager failed to initialize debug: [chars]

Explanation    During initialization, the Global Manager failed to initialize the debug module and will now exit. It should be restarted by System Manager and resynchronize it's internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-EXITING Ethernet Link OAM Global Manager failed to process events: [chars]

Explanation    The process failed to process incoming events, and will exit. It should be restarted by System Manager and resynchronize its internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-INIT_FAILED Ethernet Link OAM Global Manager failed to initialize: [chars]

Explanation    During initialization, an unexpected error was encountered. The process will exit and be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EMA Messages

Error Message     
 
    
    
   

%L2-EMA-4-ERR_ACTIVATE Failure during activation of [chars]. Error: [chars]

Explanation    A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occurred in the event loop. The process has exited and restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EPI Messages

Error Message     
 
    
    
   

%L2-EPI-3-ATTR_NOTIFY_FAILED Failed to notify a client of a change to interface attributes - out of memory

Explanation    The EPI library was unable to notify a client of a change to some interface attributes because it was unable to allocate memory. This may result in the client of the EPI library attempting to send invalid packets.

Recommended Action    This message will be seen as a result of a configuration change if the system is low on memory. Attempt to free up some memory and reapply the configuration change that caused this message to be displayed. If the problem persists, try restarting the process using this library. If this does not help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-INIT_FAILED Failed to initialize, [chars] failed [unsigned int]: [chars]

Explanation    An error was encountered while the EPI library was initializing. The error message contains details about the source of the error.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-PAK_FREE_FAILED Failed to free packet buffer: [chars]

Explanation    An error was encountered while the EPI library was attempting to free a packet buffer. The error message contains details about the source of the error.

Recommended Action    This message should be harmless, but it is possible that there is an inconsistency that may lead to a memory leak. If the problem persists, try restarting the process. If this does not help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-PKT_OVERFLOW The maximum number of packets being stored for interface: CH[hex] has been exceeded

Explanation    The EPI library has been asked to create a packet for an interface which already has the maximum number of supported packets in storage. EPI has created the packet, but may have difficulty updating packets on this interface in future.

Recommended Action    This message is likely to indicate an internal error in the process that means it is not freeing its old packet information correctly. If the process is not restarted then a future configuration change for the interface in question may not be reflected in the generated packets. Try restarting the process and, if the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ESPI Messages

Error Message     
 
    
    
   

%L2-ESPI-3-ERR_MEM_ALLOC Memory allocation failed for internal data structures

Explanation    Memory was not available for an internal data structure. The requested operation could not be accomplished because of a low memory condition. The LC will not boot up successfully and will not be able to participate in data forwarding.

Recommended Action    Run the debug show commands, gather data and contact tac. Also ensure the LC is populated with the minimum amount of memory required for proper operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ESPI-3-RX_ERR [chars]: [chars] [hex]

Explanation    This error usually indicates an internal hardware/software problem on the FPGA. This affects communication bus between adjacent ASICs on the hardware datapath. The LC may not be able to forward data packets and traffic loss may be observed due to this error. The From CPP or To CPP direction, the detailed error string and the slot number are provided as part of the message.

Recommended Action    ESPI Interface is Reset and Recovered

Error Message     
 
    
    
   

%L2-ESPI-3-TX_ERR [chars]: [chars] [hex]

Explanation    This error usually indicates an internal hardware/software problem on the FPGA. The affects the communication bus between adjacent ASICs on the hardware datapath. The LC may not be able to forward data packets and traffic loss may be observed due to this error. The From CPP or To CPP direction, the detailed error string and the slot number are provided as part of the message.

Recommended Action    ESPI Interface is Reset and Recovered

eth_gl Messages

Error Message     
 
    
    
   

%L2-eth_gl-4-EVENT_BLOCK An error was received while waiting for an event: (error: [chars])

Explanation    The indicated process encountered an error while listening for events. The process will automatically restart and retry.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-eth_gl-4-INIT_FAILED Initialization failed: [chars] (error: [chars])

Explanation    The indicated process failed to initialize. Previous messages may give the reason. The process will automatically restart and retry. Until it succeeds, Ethernet functionality may be impacted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETH_OUTPUT Messages

Error Message     
 
    
    
   

%L2-ETH_OUTPUT-3-ERR_EVM_CREATE Failed to create event connection manager: [chars]

Explanation    The ethernet output process was unable to obtain an event connection manager. Ethernet Output process client functionality on the affected node may be reduced until the problem is resolved.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETH_OUTPUT-3-ERR_NO_MEM Out of memory (failed attempt to reserve [unsigned int] bytes)

Explanation    The Ethernet Output process was not able to allocate the memory that it needed to complete the operation. Ethernet Output process client functionality on the affected node may be reduced until the problem is resolved.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ETHER_NETIO Messages

Error Message     
 
    
    
   

%L2-ETHER_NETIO-4-DEBUG_REG Debug registration failed: [chars]

Explanation    It was not possible for the Ethernet slow path support to initialize its debugging support. Some of the output from debug ether-netio output may be incomplete.

Recommended Action    No action is required.

ether_spa_intr Messages

Error Message     
 
    
    
   

%L2-ether_spa_intr-6-BURST_EVENT Burst of [chars] occurred for [dec]/[dec]/[dec]. No Manual intervention required

Explanation    A burst of interrupts have occurred and the interrupt manager has throttled the interrupt. It will be re-enabled automatically after the pause timer expires and no further intervention is required.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ether_spa_mac_error Messages

Error Message     
 
    
    
   

%L2-ether_spa_mac_error-1-RECOVERY_FAILED A Maximum MAC Error recovery retries has occurred for [dec]/[dec]/[dec]. PORT DISABLED after exceeding maximum retries. LINK force DOWN. Manual intervention required to bring port back into operation. Issue shutdown and no-shutdown on the interface to bring port into operation.

Explanation    A MAC Frame Corruption occurred on the interface, concern port is in error condition after maximum recovery retries. The concern port has been permanently disabled. Manual intervention required to re-enable the port.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ether_spa_plugin Messages

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-ERRORRECOVER A Hardware or Software error occurred. Reason : [chars] Automatic Error recovery initiated. No further intervention required.

Explanation    An error occurred in one of the devices, recovery would be attempted. If recovery succeeds no further messages would be logged and no intervention would be required.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-LINK_EVENT Interface TenGige [dec]/[dec]/[dec]/[dec], [chars]

Explanation    This will log the reason for the link to go down

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-OPTICS_OIR An Optics is [chars] for bay [dec] and port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port either has been inserted or removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-UNSUPPORTED_OPTICS [chars] port [dec] security check failed . Disable

Explanation    An Unsupported Optic Interface Module (OIM) for the specified port has been inserted .

Recommended Action    No action is required.

ETHER Messages

Error Message     
 
    
    
   

%L2-ETHER-1-CONFIGERROR Ethernet: Invalid configuration, [chars] is not supported by this interface

Explanation    Invalid configuration

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-1-IMERROR Ethernet: [chars]() line [dec]: interface manager call [chars] failed: [chars]

Explanation    The call to im failed for some reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-2-DEVCTLFAILED Ethernet: [chars]: devctl failed with code [hex]

Explanation    A devctl call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-2-OUTOFMEMORY Ethernet: [chars]() line [dec]: out of memory, unable to create [chars]

Explanation    Card has no more memory available.

Recommended Action    Verify that the card is not out of memory. Contact your Cisco technical support representative if the problem persists.

Error Message     
 
    
    
   

%L2-ETHER-2-SYSDBREGISTERFAILED Ethernet: Sysdb registration failed ([chars])

Explanation    The driver failed to initialize communication with sysdb.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-BADASYNCEVENT Ethernet: Unknown asynchronous event [dec] in [chars]

Explanation    An invalid asynchronous event was received by the driver.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-BDL_IIR_OP_FAILED The basecaps failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the Ether basecaps is out of step with the bundle configuration.

Recommended Action    Restart the ether_caps_partner process in an attempt to recover, or if this fails, detach and re-attach the physical member interface that the error was reported on by unconfiguring and reconfiguring the bundle member id.

Error Message     
 
    
    
   

%L2-ETHER-3-DILBFAILED Ethernet: [chars]() line [dec]: failed to [chars].

Explanation    A dilb call failed, preventing communication between threads/processes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-DPCFAILED Ethernet: [chars]() line [dec]: DPC call to [chars] failed.

Explanation    A direct procedure call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-EDMERROR Ethernet: [chars]() line [dec]: Bad sysdb call for tuple [chars]: [chars]

Explanation    An edm sysdb call was improperly formed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-INITFAILED Ethernet: [chars]() line [dec]: init failed in function [chars]: [chars]

Explanation    Basic initialization failed due to problem in a called function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-INVALIDARGSIZE Ethernet: Incompatible structure definition for [chars] in [chars]

Explanation    A structure passed is the wrong size due most likely to compilation problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-INVALIDTIMER Ethernet: [chars](): Invalid timer type [dec]

Explanation    An invalid timer type was found in an expired timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-RESTARTFAILED Ethernet: [chars]() line [dec]: [chars]: [dec]

Explanation    Restarting the driver failed for some reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If the problem persists, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-3-TIMERINITFAILED Ethernet: Failure initializing asynchronous timers: [chars]() - [chars]

Explanation    A failure occurred while creating or initializing the timers for the driver.

Recommended Action    Make sure there is enough memory available. Contact your representative if the problem persists.

Error Message     
 
    
    
   

%L2-ETHER-3-UNSUPPORTEDSTATS Ethernet: Unsupported stats request [dec] in [chars]

Explanation    A driver has requested an unsupported stats type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-4-ERR_EVM_EVENT_BLOCK Failure during receipt of message. Error: [chars]

Explanation    A failure occurred handling a message arriving at one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-4-INIT Failure during intialisation of [chars] in a Ether basecaps process. Error: [chars]

Explanation    A failure occurred during the initialisation of one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETHERNET Messages

Error Message     
 
    
    
   

%L2-ETHERNET-3-INTERFACE_INITIAL Failed to initialize interface [chars], due to error: [chars]

Explanation    It was not possible to initialize the physical interface due to a driver error or a system error. The interface's config may not have been restored and the interface will not be usable.

Recommended Action    Restart the driver process that reported the error. If the error is reported again then reloading the linecard may allow it to recover, but it will impact all traffic on that node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MIB_ERROR Unable to fetch requested Etherlike MIB data for interface [hex]: [chars]

Explanation    An error occurred while trying to collect MIB data requested by the SNMP infrastructure. The data for which an error was encountered will not be presented in SNMP 'get' request results.

Recommended Action    Such errors are not expected, and probably indicate an out-of-resource condition, or an inconsistency in the system state. Wait for any likely transient root problems to subside, and attempt to repeat the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MIB_INIT_ERROR Error initializing Etherlike MIB: [chars]

Explanation    An error occurred while trying to initialize the etherlikemib DLL with the SNMP infrastructure. The error may result in the inability to retrieve data from the ETHERLIKE-MIB.

Recommended Action    Such errors are not expected, and probably indicate an an inconsistency in the system state or loaded IF-MIB and ETHERLIKE-MIB DLLs. Determine if there is an initialization issue with the IF-MIB as well. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    Choose a more appropriate MTU to configure on the interface considering the MTU requirements of any L3 protocols that are configured on the interface.

Error Message     
 
    
    
   

%L2-ETHERNET-3-STATE_FSM Port state FSM operation failed [chars] on [chars], due to error: [chars]

Explanation    An operational error occurred when handling a port state event in the port state machine, and the internal state may be left in an inconsistent state without user intervention.

Recommended Action    'shutdown' and 'no shutdown' the affected interface, this should allow the state machine to recover its operational state. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-TX_DISABLE Interface [chars], link [chars]forced down due to remote signalling

Explanation    L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise.

Recommended Action    If the remote AC has changed state then this message is expected. If the remote AC hasn't changed state and this condition isn't expected then this may indicate a problem, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-BDL_IIR_OP_FAILED The driver failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the driver is out of step with the bundle configuration.

Recommended Action    Recovery will be attempted automatically. If this error message is seen repeatedly, restart the driver process that is generating the message and it will automatically recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-BER_ALARM interface: [chars], alarm: [chars], status: [chars]

Explanation    The specified Bit Error Rate Alarm has been declared or released. interface: interface on which alarm is set/cleared alarm: alarm being asserted e.g: SF-BER or SD-BER status: set/cleared

Recommended Action    If SF/SD-BER alarm is seen: Link quality degraded beyond configured threshold. Check if the peer device is injecting error frames or otherwise check if the cable is faulty.

Error Message     
 
    
    
   

%L2-ETHERNET-4-INITIALIZATION Initialization of the G-Ether library failed at stage '[chars]', due to error: [chars]

Explanation    A error occurred during the initialization of the common Ethernet driver library.

Recommended Action    The driver process is restarted automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-INTERFACE_CREATE Interface creation failed due to error: [chars]

Explanation    It was not possible to create some or all physical ethernet interfaces due to a driver error or a system error.

Recommended Action    The driver process will attempt to recover automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-6-MAC_ACC_NOT_PROGRAMMED Interface [chars]%s[chars]%s, [chars] addresses for MAC accounting

Explanation    Some MAC addresses have not been programmed for MAC accounting in the hardware. This means that MAC accounting statistics will not be collected for these MAC addresses. This is most likely due to a lack of hardware resources due to a large number of MAC addresses being programmed for MAC accounting.

Recommended Action    This condition will only affect statistics collection for some MAC addresses on this interface. If the number of MAC accounting addresses programmed, which can be checked using 'show mac-accounting', seems small and this issue is still hit this may indicate a system error, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-6-MTU_NEAR_HW_LIMIT The configured MTU of [unsigned int] on [chars] is close to the H/W limit, and hence large [chars] frames may be dropped as oversized frames

Explanation    The configured MTU is close the maximum frame size allowed on the interface. Hence large 802.1Q or QinQ frames bigger than the maximum frame size supported on the interface may be dropped.

Recommended Action    If 802.1Q or QinQ support is required on the interface, then it is recommended that either the configured interface MTU is reduced by 4 or 8 bytes, or the sub-interface MTU is reduced by 4 or 8 bytes to ensure that all frames are within the H/W limits.

FB_PLIM Messages

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ERROR [chars]: [hex], [chars]

Explanation    An error occurred in 1p OC12-ch-ds1 PLIM process. This may cause features to not work properly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ERROR_NO_RC [chars]

Explanation    An error occurred in 1p OC12-ch-ds1 PLIM process, which might involve exiting the process. Some features may not work if this error is seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-INIT_ERROR [chars]: [hex], [chars]

Explanation    An error occurred initialization of 1p OC12-ch-ds1 PLIM process, which will involve exiting the process and recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ML_ERROR [chars]

Explanation    An error occurred in the 1p OC12-ch-ds1 Multilink platform dependent component. This may cause the multilink feature to not function properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ML_PULSE_ERROR [chars]

Explanation    An error occurred in the 1p OC12-ch-ds1 PLIM multilink pulse message processing. This may cause the multilink feature to not function properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FB_SHIM_ENCAP Messages

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-EINVAL [chars]: [hex], [dec]

Explanation    An invalid input condition detected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-NO_SHIM [chars]: [hex]

Explanation    The SHIM information not found for the interface given.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-UNEXPECTED [chars]: [dec]

Explanation    Unexpected encap type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB_IPV4 Messages

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    A runtime error occurred in ASR9K adjiacency module. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Please collect the console log and following traces: show cef trace loc slot number show cef platform trace [common|ipv4] all loc slot number show adjacency hardware trace loc slot number show bundle trace all loc slot number show im trace loc slot number Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    Platform IPv4 FIB, adjacency error

Recommended Action    Please collect the console log and following traces: show cef trace loc show cef platform trace [common|ipv4] all loc show adjacency hardware trace loc show bundle trace all loc show im trace loc Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    A runtime failure occurred in FIB engine layer while processing/updating adjacency information. The message string indicates the reason for the This message also provides a string interpretation of the error code and the interface handle.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv4 all location show im trace location show bundle trace location show adjacency hardware trace location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [unsigned int]

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv4 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [dec]

Explanation    A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Please collect the console log, FIB traces (show cef trace loc slot number), FIB platform trace (show cef platform trace [common|ipv4] all loc slot number). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv4 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Please collect the console log, FIB traces (show cef trace loc slot number), FIB platform trace (show cef platform trace [common|ipv4] all loc slot number). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card whee the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv4 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    Platform IPv4 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    A runtime error occurred in ASR9K IPv4 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Please collect the console log, FIB traces (show cef trace loc slot number), FIB platform trace (show cef platform trace [common|ipv4] all loc slot number). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-GEN_ERR FIB IPV4 internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV4-5-RECURSIVE_LOOP FIB IPv4 Recursive loop: [chars]

Explanation    Recursive loop was detected. The route update will be dropped

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV4-6-INFO [chars]

Explanation    This is an information message in the ASR9K platform FIB specific code software. The message is for debug purposes only and not an error.

Recommended Action    The message is just for information. No action is needed.

FIB_IPV6 Messages

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    Platform IPv6 FIB, adjacency error

Recommended Action    Please collect the console log and following traces: show cef trace loc show cef platform trace [common|ipv6] all loc show adjacency hardware trace loc show bundle trace all loc show im trace loc Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [unsigned int]

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv6 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO_VERBOSE [chars] [chars] [chars] [dec]

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. It provides more verbose information. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv6 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO_VERBOSE [chars] [chars] [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv6 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    Platform IPv6 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.

Recommended Action    Please collect the console log and the CLI output. CLI RP show cef /RP LC show cef location show cef trace location show cef platform trace common all location show cef platform trace ipv6 all location /LC TECH show tech cef show version show install summary /TECH /CLI Also notice if the error message is transient or persistent. Report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    Platform IPv6 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-GEN_ERR FIB IPV6 internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV6-5-RECURSIVE_LOOP FIB IPv6 Recursive loop: [chars]

Explanation    Recursive loop was detected. The route update will be dropped

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV6-6-INFO [chars]

Explanation    PLATFORM IPv6 FIB, Information

Recommended Action    The message is just for information. No action is needed.

FIB_MPLS Messages

Error Message     
 
    
    
   

%L2-FIB_MPLS-3-ERR_INFO [chars] [dec]

Explanation    Platform MPLS FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|mpls] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_MPLS-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform MPLS FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|mpls] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_MPLS-3-ERROR [chars]

Explanation    Platform MPLS FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|mpls] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

FR_EDM Messages

Error Message     
 
    
    
   

%L2-FR_EDM-2-INIT [chars] : [chars]

Explanation    Init error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_EDM-3-NO_STATS unable to get stats for vc [hex], [dec]

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_EDM-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_INARP Messages

Error Message     
 
    
    
   

%L2-FR_INARP-2-CONNECT_IM failure on IM connection: [chars]

Explanation    This error indicates a problem with InARP/IM interaction.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-2-INIT failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-IF_VC_CLASS unable to apply class [chars] to interface [chars]: [chars]

Explanation    A vc-class was configured on an interface but couldn't be applied for the given reason

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-INVALID_FD received an event on unknown fd [dec]

Explanation    An event was received with an unknown fd

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-PVC_VC_CLASS unable to apply class [chars] to interface [chars].[dec]: [chars]

Explanation    A vc-class was configured on an interface but couldn't be applied

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-SOCKET_SEND could not send on socket: [chars]

Explanation    Socket returned an error, not EAGAIN or EINTR

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-UNKNOWN_EVENT received an unknown event [hex]

Explanation    An unknown event was received

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-UNKNOWN_IDB received information about an unrecognised interface

Explanation    A set of IDBs are kept with information on each InARP interface. Somehow this information has become inconsistent with the system.

Recommended Action    Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-4-UNKNOWN_INTFTYPE received an event for an unknown interface type: [dec]

Explanation    The system sent a messages which wasn't expected. It will be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-4-UNKNOWN_MSG received an unknown message: [dec]

Explanation    An unknown InARP message was received - it will be ignored

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_LMI Messages

Error Message     
 
    
    
   

%L2-FR_LMI-2-INIT LMI failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-CODEP_ERROR Configured values of [chars] and [chars] conflict during application. Changing [chars] to [dec] to maintain consistency

Explanation    LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 equals N393. Somehow SysDB is attempting to apply config which conflicts unreconcilably. The parameter being configured is adjusted to be equal to the other.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-ENCAP Unable to process Frame Relay encapsulation request

Explanation    An error occurred processing a request to set Frame Relay encapsulation on an interface. LMI will not be able to control the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-FSM_T391_EXPIRY FSM in STOPPED state while timer is running: Interface [chars]

Explanation    This indicates that FSM has gone into an error condition. We should not have a valid timer expiry event if the FSM for this particular interface was in STOPPED state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IDB_INIT IDB initialization failure for [chars] - [chars]

Explanation    Interface creation within fr_lmi process failed for the named interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IDB_SEARCH The interface specified by a handle is not one that LMI recognizes as running Frame Relay

Explanation    A call to rt_search failed to return an idb object.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IM_ERR [chars]

Explanation    Error in IM operation. Ex: Connection to IM not getting established, or some IM API errored out.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-INVALID_VC An error occurred while inserting the vc_idb into the tree, a invalid vc_idb(ifh [hex], dlci [dec]) exists

Explanation    Dangling VC found. Possible reasons: VC deletion failed in previous attempt or LMI did not get a deletion nfn from IM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-KEEPALIVES An error occurred informing the VC Manager that LMI is [chars] responsible for the line state of an interface: [chars]

Explanation    An error occurred in the VCM call to set the keepalive state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-LINE_STATE An error occurred informing the VC Manager of the line state: [chars]

Explanation    The VC Manager returned an error after receving a request to set the line state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SENDTO An error occurred sending a packet: [chars]

Explanation    The socket call sendto returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SET_DLCI_STATUS An error occurred sending the updated VC states to the VC Manager: [chars]

Explanation    The VC Manager returned an error after receiving a request to update VC states.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VC_CREATE Unable to create LMI DLCI [dec]: [chars]

Explanation    LMI was unable to create a VC it needed to function properly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VCM_VC_STATES LMI was unable to send all VC states to the VC Manager

Explanation    An error occurred sending the VC states to the VC Manager. This could have occurred searching LMI's internal database or in the call to the VCM.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-6-CODEP_CHANGE Changing defaulted value of [chars] to [dec] due to configured value of [chars]

Explanation    LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 equals N393. Sometimes when one is changed the other must be changed as well to keep the protocol functioning properly.

Recommended Action    None. This is not an error, just a notification.

FR_NETIO Messages

Error Message     
 
    
    
   

%L2-FR_NETIO-3-MEMORY Failed to allocate [unsigned int] bytes

Explanation    The DLL has failed to acquire the required amount of memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-FR_NETIO-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

FR_SFRAR Messages

Error Message     
 
    
    
   

%L2-FR_SFRAR-2-INIT SFRAR failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SFRAR-3-SYSMGR SFRAR process ready call failed: [chars]

Explanation    The call to inform the System Manager that SFRAR is running failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_SOCKET Messages

Error Message     
 
    
    
   

%L2-FR_SOCKET-2-INIT Socket failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-CONN Failed to setup fr socket EVM connection: [chars]

Explanation    The fr_socket process failed to connect to the event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-DPC_FAIL Failed to register [chars] protocol in netio

Explanation    The fr_socket process failed to send dpc message to Netio

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-NETIO_OUTPUT_FAIL Failed to send packet out to Netio: [chars]

Explanation    The fr_socket process failed to send packet out to Netio.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-PACKET_CONN Failure in packet manager connection: [chars]

Explanation    The fr_socket process failed to connect to packet manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-RESMGR_ATTACH Failed to setup fr socket as a resource manager: [chars]

Explanation    The fr_socket process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-SEND_ASYNC Failed to send async pulse [dec]: [chars]

Explanation    The fr_socket process failed to send async pulse to FR socket EVM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-SYSMGR SysMgr process ready call failed: [chars]

Explanation    The call to inform the System Manager that the FR socket is running failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_UV Messages

Error Message     
 
    
    
   

%L2-FR_UV-3-ERR_ABORT_ENCAP_FAIL [dec] encap aborts failed: The system may now be in an inconsistent state.

Explanation    The FR Uberverifier has detected a misconfiguration. It was not able to cleanup its internal DB while handling encap abort creates.

Recommended Action    The misconfiguration can be corrected by restarting fr_uv process on the specific location on which this error message is seen. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistent state.

Explanation    The FR Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occurred in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_VCM_EA Messages

Error Message     
 
    
    
   

%L2-FR_VCM_EA-2-INIT FR VCM EA failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The FR VCM EA process initialization failed whilst trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-BATCH_INTERFACE_ERROR Error during messaging: [chars]

Explanation    The FR VCM EA process has detected an error during messaging. Possible memory corruption or out of resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-DATABASE_KEY_MISSING Internal database access error

Explanation    The FR VCM EA process code/data is inconsistent. Possible coding error or data corruption.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-DLCI_MATCH_FAILED Failed DLCI match, err: [chars]

Explanation    The FR VCM EA has a wrong value of the DLCI and is not the same as what the MA sends.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-NO_STATS Failed to initialize FR VCM subinterface stats collection, err: [chars]

Explanation    The FR VCM EA subinterface stats collection initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_VCM Messages

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONFIG_INIT Configuration registration failed: [chars]

Explanation    Unable to register for configuration changes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONNS Connection initialization failed: [chars]

Explanation    Unable to initialize connections to one or more servers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-CONNECT_TO_L2VPN Connect to L2VPN server failed: [chars]

Explanation    FR VCM process on linecard tried to connect to L2VPN server on RP. Connect registration failed. FR L2 sub-interfaces will not be operational on this linecard.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-ENCAPS_TYPE Unable to specify [chars] encaps type for interface [chars]: [chars]

Explanation    The configuration in the NetIO DLL could not be updated, the system may continue with the existing encapsulation type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IDB FR [chars] IDB [chars] failed: [chars]

Explanation    Unexpected error on Interface Descriptor Block

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IM_OP FR [chars] on [chars] failed: [chars]

Explanation    The operation on the named item is not completing successfully when it is expected to, and hence the FR support may be disabled

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-INTF_NOTFOUND FR interface [chars] not found

Explanation    An action has been performed on a FR interface, but FR doesn't have any information about the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-MAIN_IF FR error on main interface [chars]: [chars]

Explanation    Unexpected error on the main interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-PTP_VC FR PVC create (dlci [dec]) on PTP subinterface failed - only one PVC is allowed

Explanation    Point-to-point (PTP) subinterfaces only allow one PVC and an attempt to create a second PVC is being rejected

Recommended Action    Remove the old PVC before creating the replacement, or use a multipoint subinterface instead

Error Message     
 
    
    
   

%L2-FR_VCM-3-SUB_IF FR error on sub-interface [chars]: [chars]

Explanation    Unexpected error on the sub-interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-SYSDB_OP FR SysDB [chars] on [chars] failed: [chars]

Explanation    Unexpected failure performing a SysDB operation.

Recommended Action    Check SysDB is still running, and if not restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_EXISTS FR VC with DLCI [dec] already exists

Explanation    The DLCI is unique per 'main' interface and this dlci is already used

Recommended Action    None.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_NOTFOUND FR VC with DLCI [dec] not found

Explanation    An operation was performed which expected a VC with the specified DLCI to exist, but it doesn't

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

FRMIB Messages

Error Message     
 
    
    
   

%L2-FRMIB-3-SYSDB FR MIB: [chars]: [chars]: [chars]

Explanation    This message indicates the FR MIB library fails to perform a SYSDB operation. *DDTS*

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FSYNC Messages

Error Message     
 
    
    
   

%L2-FSYNC-3-COMMS_ERROR Communications error for node [chars]: [chars]%s

Explanation    A error occurred in the communication between Frequency Synchronization processes. Frequency Synchronization information may be out of sync.

Recommended Action    Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-3-ESMC_SEND_TIMER Failed to re-arm the ESMC SSM send timer: [chars]

Explanation    An error occurred when attempting to re-arm the ESMC SSM send timer. No further SSMs will be sent from interfaces on the card on which this message was seen.

Recommended Action    Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-COMMS_RETRY_FAILED Communications retry failed: [chars]%s

Explanation    A Frequency Synchronization process has failed to send a message and attempts to retry the send have also failed.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-ESMC_RECEIVE_TIMER Failed to re-arm the ESMC SSM receive timer for [chars]: [chars]

Explanation    An error occurred when attempting to re-arm the ESMC SSM receive timer for the specified interface. Any SSMs received on the interface will continue to be handled, but any future peer timeouts (i.e. loss of SSMs) on the interface will go undetected.

Recommended Action    Restarting fsyncmgr on the card on which this message was seen may fix the problem. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-INIT_FAILED Failed to initialize: [chars]%s

Explanation    An error was encountered while the specified process was initializing. The error message contains details about the source of the error.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-INPUT_PROGRAMMING_FAILED Failed to program the inputs for selection point [chars]: [chars]

Explanation    The Frequency Synchronization manager that generated the message failed to program the inputs for the specified selection point into the platform. Any changes to the inputs (for example, if an input is no longer available or if it's QL has changed) will not take effect.

Recommended Action    If the error message indicates an out-of-resource condition, then resolve the underlying resource issue, and restart the Frequency Synchronization manager on the affected node using the following command: process restart fsyncmgr location node Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-INTF_IM_ERROR Interface manager failed to [chars] for [chars]: [chars]

Explanation    *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-INTF_STATUS_ERROR Failed to handle interface status change for [chars]: [chars]

Explanation    *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-LOST_EVENT [chars] lost event: [chars]

Explanation    The specified process failed to receive an event that was sent to it.

Recommended Action    If any problems are seen, they may nbe rectified by restarting the process using the 'process restart' command.

Error Message     
 
    
    
   

%L2-FSYNC-4-QLT_TIMER Failed to [chars] the [chars] timer for [chars]: [chars]

Explanation    *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-SELECTION_ERROR Failed to handle selection update for selection point [chars]: [chars]

Explanation    The Frequency Synchronization manager that generated the message encountered an error during handling of an update to the inputs selected at the specified selection point. The message contains more details of the error. The change to which inputs are selected, or to the QL or priority of the selected input, may not take effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-SHUTDOWN_CHECK_FAILED Could not determine whether to exit: [chars]

Explanation    A Frequency Synchronization process could not determine whether all Frequency Synchronization configuration has been removed and so cannot exit safely. Frequency Synchronization processes may be running despite no Frequency Synchronization configuration existing.

Recommended Action    No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-4-SIGNAL_UPDATE_FAILED Failed to create object representing signal from [chars] to local Selection Point [chars]: [chars]

Explanation    The Frequency Synchronization manager that generated the message failed to update its database, either in response to a message received from a remote Frequency Synchronization manager on another node, or after a change to the selected inputs in another selection point on this node. This is most likely due to an out-of-resource condition. The corresponding frequency signal will not be used.

Recommended Action    Resolve the underlying resource issue, then restart the Frequency Synchronization manager on the affected node using the following command: process restart fsyncmgr location node

Error Message     
 
    
    
   

%L2-FSYNC-4-TIMER_FAILED Failed to process a timer event: [chars]

Explanation    A Frequency Synchronization process has failed to process a timer event.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FSYNC-6-SELECTION_CHANGE New selection for selection point [chars]: [unsigned int] inputs selected[chars]

Explanation    A new set of inputs has been selected at the specified selection point, to drive the output of the selection point.

Recommended Action    This message is for information only, no further action is required.

Error Message     
 
    
    
   

%L2-FSYNC-6-SELECTION_FALLBACK Selection point [chars] is no longer externally synchronized: [chars]

Explanation    There is no longer a line or external source available for the specified selection point, so it has fallen back to the internal oscillator if available, or otherwise disabled the outputs.

Recommended Action    This message is for information only, no further action is required.

FWD_EDGE_COMMON Messages

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_ADJ_ERR adj engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in adjacency engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_ADJ_ERR adj engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in adjacency engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_ADJ_NULL --

Explanation    A runtime failure occurred in fib ip engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. path %d - indicates the path index fwd_type %d - the forward type

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_IP_ERR fib ip engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in fib ip engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_IP_ERR fib ip engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in fib ip engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

G709 Messages

Error Message     
 
    
    
   

%L2-G709-4-ALARM [chars] : [chars] [chars]

Explanation    The specified G709 Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-G709-4-ERROR [chars] Failed - Reason [chars]

Explanation    The dwdm encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-G709-6-INFO [chars] [chars]

Explanation    This is an informational message in the G709 PI component to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-G709-7-DEBUG_MSG Debug: [chars]: [chars] value [dec]

Explanation    This is an debug message in the G709 PI component to indicate an operation.

Recommended Action    No action is required.

GATM Messages

Error Message     
 
    
    
   

%L2-GATM-2-ERR [chars] - [dec]: [chars]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_HEX [chars] - [dec]: [chars] ([hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_IFH_STS [chars] - [dec]: [chars] ifh equals [hex] rc equals [hex]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_INT [chars] - [dec]: [chars] ([dec])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STR [chars] - [dec]: [chars] ([chars])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STS [chars] - [dec]: [chars] (rc equals [hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

GDO Messages

Error Message     
 
    
    
   

%L2-GDO-5-L2PORT_FAULT_NOTIFY [chars]

Explanation    ATM SPA GDO L-AIS insertion/removal notification messages

Recommended Action    *NONE*

Error Message     
 
    
    
   

%L2-GDO-7-DEBUG [chars]

Explanation    ATM SPA GDO L-AIS insertion/removal debug messages

Recommended Action    *NONE*

GE_ASIC_PRP3 Messages

Error Message     
 
    
    
   

%L2-GE_ASIC_PRP3-3-INIT_ERR GigE hardware initialization failed. Reason equals [chars], Error Decode equals [chars]

Explanation    The GE hardware management subsystem encountered an error during initialization. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the RP's onboard ethernet. %s - indicates the reason for the failure %s - indicates the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt' to verify that the process is up and running. If it is not, try doing 'process restart ge_mgmt' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GE_ASIC_PRP3-3-PKT_ERR GigE hardware packet error. Reason equals [chars]

Explanation    The GE hardware management subsystem encountered an error during receiving of packets. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the RP's onboard ethernet. %s - indicates the reason for the failure

Recommended Action    Execute 'show process ge_mgmt' to verify that the process is up and running. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GE_ASIC Messages

Error Message     
 
    
    
   

%L2-GE_ASIC-3-INIT_ERR GigE hardware initialization failed. Reason equals [chars], Error Decode equals [chars]

Explanation    The GE hardware management subsystem encountered an error during initialization. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the RP's onboard ethernet. %s - indicates the reason for the failure %s - indicates the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt' to verify that the process is up and running. If it is not, try doing 'process restart ge_mgmt' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GE Messages

Error Message     
 
    
    
   

%L2-GE-3-INIT_ERR PRP Gigabit Ethernet execution agent initialization failed. [chars]/[chars]

Explanation    The PRP Gigabit ethernet execution agent failed to initialize. The PRP gigabit ethernet execution agent provides the support for packet forwarding over the GE port present on the Performance Route Processor. A failure of this execution agent likely means that packets being sent to or from the PRP's GE ports are going to be lost. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart ge_mgmt location 0/x/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSR_aib Messages

Error Message     
 
    
    
   

%L2-GSR_aib-3-RES_ERROR Error: [chars]: Err equals [chars]

Explanation    A error occurred in GSR aib Driver resulting in a failure to provide some system service as indicated in the message text. This is most likely any internal error. %s - reason for the failure. %s - dll causing the error.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-GSR_aib-6-INFO_MSG Info: [chars]

Explanation    This is a Informational message in the GSR aib driver to indicate an operation.

Recommended Action    No action is required.

GSR_edge_fwd_lib Messages

Error Message     
 
    
    
   

%L2-GSR_edge_fwd_lib-3-RES_ERROR [chars]: Err equals [chars]

Explanation    An error occurred in Edge forwarding lib resulting in a failure to provide some system service as indicated in the message text. %s - indicates the reason for the failure. %s - is the decoded error reason. This error indicates there is problem in LC Forwarding resources

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Recommended Action   

GSR Messages

Error Message     
 
    
    
   

%L2-GSR-3-ERR_MEM_ALLOC Memory allocation failed for internal data storage

Explanation    Memory was not available for an internal data structure. The requested operation could not be accomplished because of a low memory condition. The LC may not boot up successfully and will not be able to participate in data forwarding.

Recommended Action    Reload the LC using 'hw-module' command. If problem persists, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Also ensure the LC is populated with the minimum amount of memory required for proper operation.

Error Message     
 
    
    
   

%L2-GSR-3-ERR_SF_RESET [chars] : Hardware initialization of Fabric interface ASIC failed. Node will be reloaded for recovery after collecting diag information

Explanation    During boot-up or fabric configuration change or error handling, there was a problem in the initialization of fabric interface ASIC. Problem causes the node to be reloaded and will be restored by itself.

Recommended Action    Call your Cisco technical support representative and provide the gathered information. Node will be reloaded and restored in short time.

Error Message     
 
    
    
   

%L2-GSR-3-ERR_THREAD_CREATE Internal OS call to create additional threads failed, [chars]

Explanation    An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-ERR_THREAD_CREATE Internal OS call to create additional threads failed, [chars]

Explanation    An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT Call to checkpoint library failed, status equals [chars]

Explanation    An internal support library returned an error. The driver was not able to save data for restart ability. A restart of the FIAD process may not be NSF compliant. Any software upgrade requiring FIAD to be restarted will result in traffic loss. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT_DATA_EXISTS The driver is coming up in normal mode, but checkpoint information already exists.

Explanation    When a driver comes up in NORMAL_MODE, checkpointing data should not already exist. This indicates a mismatch in the driver state. The checkpointed data may be corrupted on the LC. Restart ability of processes may be affected.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT_RECOVERY_NODATA The driver is coming up in restart mode, but the checkpoint info does not exist.

Explanation    When a driver comes up in RECOVERY_MODE, checkpointing data should have already been saved to the checkpointing record by the previous life of the driver. This can impact the drivers ability to restart without affecting traffic.

Recommended Action    The system may not recover from this error automatically. A reload of the linecard should be initiated in order to recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_DEVCTL_ERR Unsupported devctl case [dec]

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_DLOPEN Failed to load [chars]

Explanation    The library (dll) named could not be found or there was an error while loading. Indicates a software installation problem. The LC will not boot up successfully and will not be able to participate in data forwarding.

Recommended Action    Collect output of following commands. show version show install active show dll show memory summary The exact error message seen show tech-support shelf-management show logging LC can not operate if this error persists. Try the following recovery attempts. 1. Reload the card using 'hw-module' command. 2. Physically OIR the card out and insert back. 3. Upgrade firmwares and retry loading the card. Call your Cisco technical support representative and provide the following information if the problem persists.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_INT_ATTACH Internal OS call to process interrupts failed

Explanation    An internal OS library returned an error. Some error conditions on the LC may not be reported correctly. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card.

Recommended Action    The system will normally recover from this error without intervention. This error indicates a more fundamental issue on the LC. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MEM_CHIP_ERR ([chars]): no memory for chip data.

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MEM_ERROR ([chars]): FIA failed to initialize memory. Exiting

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MMAP_ERROR ([chars]): FIA memory mapping failed. Exiting

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_NOT_RESET FIA was not reset before programming

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_STARTUP_DATA ([chars]), Illegal size of input for FIA startup data structure

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_SYNC_ERROR ([chars]): FIA failed to sync, los_status [hex], los_error [hex], fia_config [hex]

Explanation    This error usually indicates an internal hardware problem on the card.

Recommended Action    If there are other error reports about the switch fabric (CSC/SFC) then wait several minutes for corrective action. Otherwise, run diagnostics for slot reporting error. Use 'diag slot verbose' command. (This command may not work for the slot containing the primary route processor.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNHALT Could not unhalt [chars]

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNSUPPORTED_CDB Unsupported cdb version

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNSUPPORTED_OPAQUE_DATA Unsupported opaque data version

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FS_ERR1 [chars] : [hex]

Explanation    EE192 SerDes retimer driver error. An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. This error indicates a more fundamental issue on the LC. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR_HW [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR2_HW [chars] : [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR3_HW [chars] : [chars] : [hex] [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR4_HW [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR5_HW [chars] : [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver single-bit error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR6_HW [chars] : [chars] : [hex] [hex] [hex]

Explanation    EE192 Spabrg driver single-bit error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR7_HW [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-4-ERR_SYSDB_SET system database item set failed [chars]

Explanation    Error in communication channel with the system database. There was a problem accessing the named item. This could be a temporary problem caused by an outage in the connection to the server. The connection will be restored, but the operation itself was aborted.

Recommended Action    Call your Cisco technical support representative and provide the gathered information. Copy the output of the following commands exactly as they appear. show processes fiad location X/X/X

Error Message     
 
    
    
   

%L2-GSR-4-FIA_EDM system database access failed [chars]

Explanation    Error in communication channel with clients. There was a problem accessing the system database item. This could be a temporary problem caused by an outage in the connection to the server. The connection will be restored, but the operation itself was aborted.

Recommended Action    Call your Cisco technical support representative and provide the gathered information. Copy the output of the following commands exactly as they appear. show processes fiad location X/X/X

Error Message     
 
    
    
   

%L2-GSR-6-FIA_INFO_MSG [chars]

Explanation    This is a Informational message in the FIA Driver to indicate an operation. You need not take any action.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-6-FIA_PCDS_FAILURE [chars] failed, slot equals [dec], error info equals [chars]

Explanation    This is a message indicating FIA PCDS a debugging information collection has faced a problem.

Recommended Action    If the card is currently not used in service, reload using 'hw-module' command can clear the error condition. If the card is already in service this message may be ignored.

Error Message     
 
    
    
   

%L2-GSR-6-PCDS_STATS_TIMESTAMP_FAILURE pcds_get_timestamp failed for fishstick stats

Explanation    This is a message indicating FIA PCDS a debugging information collection has faced a problem in getting the time stamp to be associated with the statistics collected.

Recommended Action    If the card is currently not used in service, reload using 'hw-module' command can clear the error condition. If the card is already in service this message may be ignored.

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_CRIT_INFO [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver critical info

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO1_HW [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO2_HW [chars] : [chars] : [hex], [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO3_HW [chars] : [chars] : [hex], [hex], [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-7-FIA_FCTL [chars] failed, slot equals [dec], error info equals [chars]

Explanation    An interprocess call returned an error. Possibly a timeout. The central switch fabric software may not recognize the LC that exhibits this error. Maintenance bus may not be operating as desired.

Recommended Action    Look for other fctl messages. Wait for corrective action. The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information.

GT64115 Messages

Error Message     
 
    
    
   

%L2-GT64115-2-PCI_CONFIG Fatal error: [chars]: [dec]

Explanation    A fatal error occurred during GT64115 PCI Driver configuration %s - error message %d - data

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GT64115-2-PCI_INIT Fatal error: [chars]

Explanation    A fatal error occurred during GT64115 PCI Driver initialization %s - PCI init error message

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GT64115-3-PCI_BRIDGE_INTR PCI Bridge Intr: [chars] [dec] [dec]

Explanation    This is an error message resulted from an interrupt from the PCI device. %s - Info message %d - Interrupt %d - Interrupt mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

gulf Messages

Error Message     
 
    
    
   

%L2-gulf-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-4-WARNING warning: [chars]: [chars]: [dec]

Explanation    A warning condition is detected in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-6-INFO_MSG Info: [chars]: [chars]: [dec]

Explanation    This is a Informational message in the gulf driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-gulf-7-DEBUG_MSG Debug: [chars]: [chars]: [dec]

Explanation    This is a debug message in the gulf driver to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_MQS Messages

Error Message     
 
    
    
   

%L2-HALE_MQS-3-ERR_MEM_ALLOC [chars] , [chars]

Explanation    This message indicates a failure in allocating memory for MQS extension. The causes for this error could be lack of memory or a hardware resource.

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_QOS Messages

Error Message     
 
    
    
   

%L2-HALE_QOS-3-ERR_COMMIT Route ([chars],[chars])

Explanation    This message indicates a failure in committing route (S, G). This means QoS feature will not be applied for the specified route; Traffic through this route would go to the default queue. The causes for this error could be lack of memory, a hardware resource limitation, or an internal error. %s,%s - indicates the (S, G)

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. Retry the QoS configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HALE_QOS-3-ERR_MEM_ALLOC [chars] , [chars]

Explanation    This message indicates a failure in allocating memory for QOS extension. The causes for this error could be lack of memory or a hardware resource limitation.

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_REPLICORD Messages

Error Message     
 
    
    
   

%L2-HALE_REPLICORD-3-ERR_MEM_ALLOC [chars] , [chars]

Explanation    This message indicates a failure in allocating memory for replicorder extension. The causes for this error could be lack of memory or a hardware resource limitation.

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_TCAM Messages

Error Message     
 
    
    
   

%L2-HALE_TCAM-3-ERR_MEM_ALLOC [chars] , [chars]

Explanation    This message indicates a failure in allocating memory for TCAM extension. The causes for this error could be lack of memory or a hardware resource limitation.

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HALE_TCAM-3-ERROR [chars]: [chars]

Explanation    A SW exception occurred in TCAM extension Library

Recommended Action    If TCAM memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration.

HALE_TLU Messages

Error Message     
 
    
    
   

%L2-HALE_TLU-3-ERR_MEM_ALLOC [chars] , [chars]

Explanation    This message indicates a failure in allocating memory for TLU extension. The causes for this error could be lack of memory or a hardware resource limitation.

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HFA_COMMON Messages

Error Message     
 
    
    
   

%L2-HFA_COMMON-3-FATAL_ERR Fatal error: [chars]: Err equals [chars]

Explanation    A fatal error occurred in HFA common Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_COMMON-4-ANOMALY [chars]

Explanation    A SW exception of unexpected condition or an out of resources (memory, HW profiles, etc) situation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_COMMON-6-INFO_MSG [chars] [chars]

Explanation    This is a Informational message in the HFA common Driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-HFA_COMMON-6-INFO_WARNING [chars] err [hex]

Explanation    This is a Informational message in the HFA common Driver to indicate an operation.

Recommended Action    No action is required.

HFA_LIB Messages

Error Message     
 
    
    
   

%L2-HFA_LIB-3-ANOMALY HFA BLWM message failure

Explanation    Software exception. Quite probably a SW bug.

Recommended Action    Please collect the logs mentioned in the required_info and contact support team.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_CLIENT_CONF_FAILED hfa: blwm client configuration failed, error: [hex] [chars]

Explanation    Unable to configure BLWM client functionality. Will not be able to send any BLWM messages from HFA.

Recommended Action    Please collect the logs mentioned in the required_info and contact support team.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_CLIENT_REBIND_FAILED hfa: blwm client rebind failed, error: [hex] [chars]

Explanation    Unable to rebind with BLWM client functionality after a connection reconnect. Will not be able to send any BLWM messages from HFA.

Recommended Action    Please collect the logs mentioned in the required_info and contact support team.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_MSG_SEND_FAILED hfa: blwm msg send/flush: retried: [dec] time(s), failed to send, error: [hex] [chars]

Explanation    Unable to send/flush a BLWM message to the HFA server.

Recommended Action    Please collect the logs mentioned in the required_info and contact support team.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_RECVD_REPLY_FAIL hfa: Received a failure reply code for a batched request, reply code: [dec]

Explanation    This is the message printed by the default handler installed by HFA to process the replies received for batched requests. The default handler's behavior is to just print this message. The BLWM might be processed completely but the return code in the reply message indicates failure. The application should install its own handler to handle the replies to batched requests.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-MSG_SEND_FAILED hfa: msg: [dec], retried: [dec] time(s), failed to send, errno: [chars]

Explanation    Unable to send a message to the HFA server.

Recommended Action    Please collect the logs mentioned in the required_info and contact support team.

Error Message     
 
    
    
   

%L2-HFA_LIB-4-BLWM_REPLAY_REQUEST hfa: Replaying a batched request of type [dec] that might have been partially processed before.

Explanation    Due to a server restart, a batched request might have been partially processed. The default handler installed by HFA simply replays the request. Applications that can not afford to replay a request should install their own handler.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-4-ERR_LOCK [chars] error on [chars], rc equals [dec]

Explanation    An error occurred when un/locking HFA HW. Some of the hardware programming may be inconsistent.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-6-INFO_WARNING [chars]: [dec]

Explanation    This is a Informational message in the HFA client LIB to indicate an operation.

Recommended Action    Debug message only. No action is required.

if_discovery Messages

Error Message     
 
    
    
   

%L2-if_discovery-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in plim pos 4p oc12 Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-if_discovery-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the plim pos 4p oc12 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-if_discovery-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the plim pos 4p oc12 driver to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IGMPSN_POLICY Messages

Error Message     
 
    
    
   

%L2-IGMPSN_POLICY-3-ORA_INSTBUILD Failed to build [chars]: [chars] ([chars])

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN_POLICY-3-ORA_ORABUILD Failed to build ORA[chars]: [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN_POLICY-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IGMPSN Messages

Error Message     
 
    
    
   

%L2-IGMPSN-3-DP_CONGESTION Layer 2 multicast data plane programming congestion

Explanation    Applications are providing state change to the layer 2 multicast data plane hardware faster than the hardware can be programmed. Internal message to the hardware have been dropped such that IGMP snooping state is now out of sync with the hardware. The user must slow the rate of IGMP state change being received by the system. The system will automatically recover from this condition once the rate of IGMP state change has been reduced.

Recommended Action    The user must slow the rate of IGMP state change being received by the system. The system will automatically recover from this condition once the rate of IGMP state change has been reduced.

Error Message     
 
    
    
   

%L2-IGMPSN-3-ERR_INIT Initialization failed: [chars], [chars]

Explanation    An error occurred during initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN-3-INIT Initialization failed: [chars]

Explanation    An error occurred during initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN-3-NET_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN-3-SOCK_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN-3-SYSDBINIT Error initializing the system database: [chars]

Explanation    An error occurred when initializing the system database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IGMPSN-5-DP_CONGESTION_CLEAR Layer 2 multicast data plane programming congestion cleared

Explanation    The layer 2 multicast data plane hardware programming has been resynced with the state in the IGMP snooping application.

Recommended Action    The system is attempting to recover from a layer 2 multicast data plane programming congestion condition. No user action is required.

IOB Messages

Error Message     
 
    
    
   

%L2-IOB-3-INTR IOB Intr: [chars]

Explanation    The IOB FPGA has been interrupted due to an access fault %s - error message

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IOB-5-UNKNOWN_INTR Unknown IOB Intr: [chars]: [dec]: [dec]

Explanation    This is a message in the IOB FPGA driver to indicate that it has detected an unknown interruption %s - description %d - level %d - mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_EA Messages

Error Message     
 
    
    
   

%L2-IPV6_EA-3-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization process such as getting an evm failed.

Recommended Action    sysmgr will retry to start the hfrlc_ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%L2-IPV6_EA-3-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization process such as getting an evm failed.

Recommended Action    sysmgr will retry to start the ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%L2-IPV6_EA-3-NOMEM IPv6 EA failed to program '[chars]' due to low memory

Explanation    The IPv6 EA process could not allocate memory needed to program some IPv6 feature.

Recommended Action    Check memory status.

Error Message     
 
    
    
   

%L2-IPV6_EA-3-PLAT_UPD_FAILED Platform update failed: [chars] - [chars](CH[hex])

Explanation    Platform update failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6_EA-3-PLAT_UPD_FAILED_GL Platform update failed for [dec] interface: [chars] - [chars]

Explanation    Platform update failed for all interfaces in a batch.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6_EA-4-ERROR [chars]: [chars]

Explanation    There was an error with processing an event in the EA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IXP2800_FWD Messages

Error Message     
 
    
    
   

%L2-IXP2800_FWD-3-IPCP_FAILURE Function [chars] failure errno [chars]

Explanation    IPCP communication failure.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-3-NONFATAL_ERROR Nonfatal error: [chars] error code [dec]

Explanation    This is a error message of the IXP2800 forwarding driver to indicate either anomalies which are not fatal. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-7-LOG_FILE_ERROR Test DLL failed to open log file [chars] ([chars])

Explanation    The NPU test DLL failed to open the log file

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-7-UNEXPECTED_FUNC_INVOC Function [chars] invoked

Explanation    An unexpected function invocation occurred

Recommended Action    None

IXP2800_HW Messages

Error Message     
 
    
    
   

%L2-IXP2800_HW-2-NOMEM ixp2800 HW driver Could not allocate memory

Explanation    'ixp2800 HW driver has failed to acquire the required amount of memory.'

Recommended Action    *REDUCE*

Error Message     
 
    
    
   

%L2-IXP2800_HW-3-FATAL_ERROR [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A fatal error occurred in IXP2800_HW Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IXP2800_HW-4-WARNING [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A warning condition occurred in IXP2800_HW Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IXP2800_HW-6-INFO [chars]

Explanation    SERVICE card ixp2800_hw driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-IXP2800_HW-7-LOG_FILE_ERROR ixp2800 HW driver DLL failed to open log file [chars] ([chars])

Explanation    The NPU HW driver DLL failed to open the log file

Recommended Action    None

IXP2800_SERVICE Messages

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-2-NOMEM ixp2800 service Could not allocate memory

Explanation    'ixp2800 service has failed to acquire the required amount of memory.'

Recommended Action    *REDUCE*

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-3-FATAL_ERROR [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A fatal error occurred in IXP2800_SERVICE Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-3-HOST_SPU_ERROR [chars] Fatal error - [chars]

Explanation    A fatal error occurred in SPU common Driver

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-3-IPCP_FAILURE Function [chars] failure errno [chars]

Explanation    IPCP communication failure.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-4-WARNING [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A warning condition occurred in IXP2800_SERVICE Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-6-INFO [chars]

Explanation    SERVICE card ixp2800_service driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-IXP2800_SERVICE-7-LOG_FILE_ERROR ixp2800 service DLL failed to open log file [chars] ([chars])

Explanation    The NPU service DLL failed to open the log file

Recommended Action    None

JACKET Messages

Error Message     
 
    
    
   

%L2-JACKET-3-API_ERROR Failed to [chars] to jacket process

Explanation    Client to the SPA THOR jacket process had a communications failure

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-CPU_CTRL_INIT Failed to initialize CPU Ctrl: err [chars]

Explanation    Unable to initialize CPU Ctrl device.

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-CPU_CTRL_INTS Failed to [chars] CPU Ctrl register id [dec]: err [chars]

Explanation    Unable to enable/disable/clear a CPU Ctrl interrupt register.

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-CPU_CTRL_REG_ACCESS Failed to [chars] CPU Ctrl register id [dec]: err [chars]

Explanation    Unable to read/write to a CPU Ctrl register.

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-CPU_CTRL_REG_LOCK Failed to enable CPU Ctrl register lock: err [chars]

Explanation    Unable to obtain register access lock for CPU Ctrl.

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    A critical error occurred in jacket driver which involves exiting the process. The jacket driver will restart and unless the same error occurs on the next attempt the driver will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-ERROR [chars]

Explanation    SPA THOR Jacket error

Recommended Action    When errors occur in jacket, it is very likely the jacket process will restart itself.

Error Message     
 
    
    
   

%L2-JACKET-3-INTERNAL_ERR Internal error with [chars] in [chars](), at line [dec]

Explanation    Internal error has occurred

Recommended Action    Report this error.

Error Message     
 
    
    
   

%L2-JACKET-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred while accessing the hardware in jacket driver which involves exiting the process. The driver will restart and attempt normal functionality. If the error is transient, the jacket driver and the SPAs will continue normal operation. If the error is persistent, the jacket card hardware needs to be checked out for access failures.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-RULES_CRITICAL_ERROR SPA subslot [dec]: FAILED: [chars] for [chars]

Explanation    A critical error occurred in jacket driver rules validation for a SPA which results in the SPA not being enabled. This does not affect the other slots on the jacket card. Please check the SW support for the SPA slot for which this message is seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_DISABLE [dec] requests to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA and disable the SPA to avoid LC reload

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_PIO_ERROR SPA subslot [dec]: had [chars] error when accessing address [hex] with fault code [dec]

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_SELF_DESTRUCT [chars] has requested to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPABRG_BAY SPAQFP Bridge error in SPA [dec]: [chars]

Explanation    SPAQFP bridge has encountered an error in SPA related operation

Recommended Action    Reinsert the SPA and fasten it tightly, if error persistent, replace this SPA with same type, report error with all error messages.

Error Message     
 
    
    
   

%L2-JACKET-3-SPABRG_INIT SPA QFP Bridge [dec] init failed: [chars]

Explanation    SPAQFP Bridge has encountered an error during initialization

Recommended Action    Report Error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_BRIDGE_BIND Failed to bind to the QFP SPA bridge controller server: [chars]

Explanation    Failed multiple attempts to bind to QFP SPA bridge controller server

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_GIC_BIND Failed to bind to the QFP generic interface client library: [chars]

Explanation    Failed to bind to the QFP Generic Interface Client

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_HA_ACK Failed to acknowledge a requested from the QFP high availability server: [chars]

Explanation    After servicing a request from the QFP high availability server, the acknowledgement of the request failed

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_HA_BIND Failed to bind to the QFP high availability server: [chars]

Explanation    Failed to bind with the QFP high availability infrastructure

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource

Recommended Action    When errors occur in jacket, it is very likely the jacket process will restart itself

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_NO_CONNECTION SPA bridge controller [unsigned int] failed to find [chars] QFP connection: [chars]

Explanation    Failed to find existing QFP connection

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_BRIDGE_CONFIG Failed to configure the SPA bridge controller: [chars]

Explanation    Failed to configure attributes on a SPA bridge controller

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_BRIDGE_PRESENCE Failed to notify the QFP about SPA bridge controller [unsigned int]: [chars]

Explanation    The line card initialization sequence failed to discover a SPA bridge controller

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_BRIDGE_REMOVAL Failed to remove SPA bridge controller [unsigned int]: [chars]

Explanation    Failed to remove a SPA bridge controller

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_BRIDGE_UPDATE Failed to update the QFP about SPA bridge controller [unsigned int]: [chars]

Explanation    Failed to update the QFP SPA bridge controller client about the SPA bridge controller initialization

Recommended Action    When errors occur in jacket, it is very likely the jacket process will restart itself

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_DISCOVERY Failed to inform QFP about [chars] of SPA from bay [unsigned int]: [chars]

Explanation    Failed to propagate information about SPA insertion or removal

Recommended Action    Report this error

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPA_UPDATE_NULL_BAY Invalid internal structure for bay on SPA [chars]

Explanation    --

Recommended Action    Try to recover from this error by reloading the SPA or reloading the line card. If this problem persists, please report it.

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPI_RX_PHY_RESET SPA bridge controller [unsigned int] failed SP4I RX PHY reset on QFP SPI4 link [unsigned int]: [chars]

Explanation    Failed enable/disable interrupts on the specified SPI link

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPI4_CNTRL SPA bridge controller [unsigned int] failed to [chars] on QFP SPI4 link [unsigned int], direction [chars]: [chars]

Explanation    Failed enable/disable specified SPI4 link

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPI4_INTERRUPT_CNTRL Failed to [chars] SPI4 [chars] interrupts for SPA bridge controller [unsigned int]: [chars]

Explanation    Failed to enable/disable interrupts on the specified SPI4 link

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPI4_SYNC Failed to synchronize SPI4 bus between SPA bridge controller [unsigned int] and QFP

Explanation    Failed to synchronize SPI4 bus between SPA bridge controller and packet processing engine

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-4-QFP_ERROR_SPI4_SYNC_CHECK SPA Bridge controller [unsigned int] QFP-SPI4 synchronization check failed in [chars] direction: [chars]

Explanation    The SPA bridge controller detected a SPI4 error between itself and QFP

Recommended Action    If this problem persists, reload the line card

Error Message     
 
    
    
   

%L2-JACKET-6-EVENT_INFO SPA subslot [dec]: [chars] for [chars], driver [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-INFO [chars]: [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-SPARULE SPA [chars] is not allowed in bay [dec]: [chars]

Explanation    Either an unsupported SPA was inserted, or an error occurred when a full rate SPA and another SPA tried to use the same SPA bridge controller resources. This is not allowed due to bandwidth limitations. SPA bays 0 and 2 share one controller, and SPA bays 1 and 3 share a second controller.

Recommended Action    Both in the case of unsupported SPA type and exceeding bandwidth resources, the newly inserted SPA should be physically removed.

Error Message     
 
    
    
   

%L2-JACKET-6-UPGRADE_FPGA [chars]

Explanation    Upgrade SPA FPGA message

Recommended Action    none

Error Message     
 
    
    
   

%L2-JACKET-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the jacket driver to indicate anomalies which are not critical. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

JDAM Messages

Error Message     
 
    
    
   

%L2-JDAM-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in JDAM Driver which involves exiting the PLIM process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JDAM-6-INFO_MSG [chars] [chars] [dec]

Explanation    This is a Informational message in the JDAM driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JDAM-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the JDAM driver to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2C Messages

Error Message     
 
    
    
   

%L2-L2C-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistent state.

Explanation    The L2VPN Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2C-4-WARN_EVENT Event loop error: [chars]

Explanation    The L2VPN Uberverifier has encountered a problem in its event loop and cannot continue. In this situation it should restart.

Recommended Action    The L2VPN Uberverifier should recover on restart. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2C-4-WARN_INIT Failed to initialize [chars]: [chars]

Explanation    The L2VPN Uberverifier process failed to initialize correctly. In this situation it restarts, but may not recover if there is a persistent error in the IOS-XR system and the L2VPN Uberverifier is later unable to reestablish its connections and initialize successfully.

Recommended Action    The Uberverifier is not essential for system operation. However, if it is not running as intended, it may be possible for a misconfiguration to be allowed. If this persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2FIB_DEBUG-3-ERR [chars]: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_LIB Messages

Error Message     
 
    
    
   

%L2-L2FIB_LIB-2-OOR L2FIB has run out of [chars] resource memory. No more updates will be handled by the L2FIB. Please delete ACs to resume normal operation on this node

Explanation    The l2fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Significant ACs will have to be deleted on the affected node to resume normal l2fib operation.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-ERR [chars]

Explanation    Some error occurred in operations related to L2FIB API area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-4-RSRC_LOW L2FIB running low on [chars] resource memory. L2FIB will now begin resource constrained forwarding. Only route deletes will be handled in this state, which may result in mismatch between L2VPN mgr/AIB/L2FIB and L2FIB. Traffic loss on certain ACs can be expected. The L2FIB will automatically resume normal operation, once the resource utilization returns to normal level

Explanation    The l2fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has entered resource constrained forwarding mode. In this mode, the l2fib will only handle route deletes which may potentially free up some memory. Due to this operational mode, the L2VPN mgr/AIB/L2FIB and L2FIB will be out of sync. Once ACs are deleted and resource utilization level drops to acceptable levels again, l2fib will come out of this operational mode and resume normal operation.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Any action that reduces number of ACs will eventually result in the l2fib returning to normal operation after few seconds.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-6-BDXC_SEND [chars]

Explanation    An IPC between L2FIB and its client process failed; the message will be retried. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_SHM Messages

Error Message     
 
    
    
   

%L2-L2FIB_SHM-2-INIT L2FIB initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_SHM-3-ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB Messages

Error Message     
 
    
    
   

%L2-L2FIB-2-INIT L2FIB initialization failure: [chars] [chars]

Explanation    L2FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-INVALID_MSG L2FIB thread [chars] received an invalid message: [chars] [unsigned int]

Explanation    L2FIB thread got an invalid message so it is exiting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-SHM_INIT L2FIB shared memory initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-WAVL_ERR [chars] failed (tree equals [chars])

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-5-MAC_TABLE_RESYNC_COMPLETE The resynchronization of the MAC address table is complete [chars]

Explanation    The command to resynchronize the MAC address table may take a while to complete. This message indicates that resynchronization is complete and the MAC address table can be displayed..

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2FIB-6-GEN_INFO_CERR [chars]: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-6-GEN_INFO_ERR [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-6-XC_MOD XC/BP delete-and-create: [chars]

Explanation    The L2VPN provision message is handled by deleting old XC/BP, and creating a new one.

Recommended Action    None.

L2TP Messages

Error Message     
 
    
    
   

%L2-L2TP-2-INIT L2TP initialization failure: [chars] [chars]

Explanation    L2TP initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2TP-3-GEN_ERR L2TP internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2TP-3-IPC_ERR L2TP IPC transport error: [chars] [chars]

Explanation    An IPC transport software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2VPN_DEBUG-3-ERR [chars]: [chars]

Explanation    Debug and ltrace library initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_PW Messages

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-INVALID Error [chars]

Explanation    AToM getting invalid provision

Recommended Action    This is not expected and fatal.

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-NOPRIMARY Pseudowire with address [chars], id [chars], [chars]

Explanation    The L2VPN Backup Pseudowire couldn't find it's primary PW.

Recommended Action    This is not expected and fatal.

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-UPDOWN Pseudowire with address [chars], id [chars], state is [chars]

Explanation    The L2VPN Pseudowire went up or down

Recommended Action    If the state change was unexpected, confirm the configuration settings for the cross-connect.

Error Message     
 
    
    
   

%L2-L2VPN_PW-6-STANDBY Pseudowire with address [chars], id [chars], state is standby

Explanation    The L2VPN Pseudowire became standby.

Recommended Action    If the state change was unexpected, confirm the configuration settings for the cross-connect.

Error Message     
 
    
    
   

%L2-L2VPN_PW-6-STANDBY_READY Pseudowire with address [chars], id [chars], state is standby ready

Explanation    The L2VPN Pseudowire became standby ready.

Recommended Action    If the state change was unexpected, confirm the configuration settings for the cross-connect.

L2VPN Messages

Error Message     
 
    
    
   

%L2-L2VPN-2-CRIT_MEM_SHUT [chars] process shutting down due to 'Critical' memory state.

Explanation    The system has notified a process that it is critically short of memory and the process is shutting down.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-2-VFI_STATE_CHANGED State of VFI [chars] under Bridge Domain [chars] (BD ID: [unsigned int]) has been changed to [chars]

Explanation    The state of specified VFI, under the BD with BD ID, has been changed. The possible states are: - up - down - admin down The trigger of the VFI state change are: - Shut/No Shut BD from CLI - Shut/No Shut VFI from CLI - BD operational state changed

Recommended Action    None. To suppress this IOS message, please unconfigure 'l2vpn logging vfi status'.

Error Message     
 
    
    
   

%L2-L2VPN-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occurred while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-EVENT_ERR [chars] failed: [chars]

Explanation    Some error occurred in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-GEN_ERR [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-INTERNAL_ERROR L2VPN sanity check failed for Pseudowire ID [chars] pw-id [chars]: [chars]. Limit is [dec]

Explanation    An internal error has been encountered and the Pseudowire cannot be established.

Recommended Action    Please provide the exact error message seen on the console, collect a core dump of the running l2vpn_mgr process, and the show tech-support l2vpn output for further analysis of the error condition and potential recovery

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occurred in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occurred in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-4-BD_MST_LOOP Potential MST forwarding loop in Bridge Domain [chars] (BD ID: [unsigned int]) for interface [chars] and msti: [unsigned int]

Explanation    A potential mis-configuration with more than one sub-interfaces in this bridge domain from the same main port and having the same msti value.

Recommended Action    To recover from this fault it is recommended to delete from the bridge domain the extra sub-interfaces belonging to the same main port and in the same msti.

Error Message     
 
    
    
   

%L2-L2VPN-4-BRIDGE_MTU_MISMATCH [chars] mtu of [dec] does not match bridge mtu of [dec]

Explanation    The interface MTU does not match the bridge payload MTU.

Recommended Action    Configure the bridge to match the interface MTU.

Error Message     
 
    
    
   

%L2-L2VPN-4-ENCAP_REMOVED_PW Pseudowire encapsulation is deleted, pseudowire attached with pw-class '[chars]' will become unresolved

Explanation    Encapsulation in the pw-class is deleted, all pseudowires attached with this pw-class will be unresolved as encapsulation type become not specified.

Recommended Action    Config the pseudowire encapsulation in the pw-class and re-attach the pw-class to the pseudowires.

Error Message     
 
    
    
   

%L2-L2VPN-4-ENS_RESYNC_FAILURE L2VPN manager is unable to re-connect with peers via ENS/GSP for class [unsigned int], ens_handle [hex], [chars]

Explanation    'L2VPN manager is unable to re-connect with peers via ENS/GSP due to ENS API failures. Will retry.'

Recommended Action    To recover from this state, one may try 'process restart' command. For examples, - proc restart gsp - proc restart l2vpn_mgr OR Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_AC_SHUT Number of MAC addresses in AC '[chars]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the attachment circuit has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_BD_SHUT Number of MAC addresses in bridge-domain '[chars]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the bridge-domain has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the bridge-domain, it has been shut down. All the ports under the bridge too are automatically shutdown.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the bridge-domain up.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_PW_SHUT Number of MAC addresses in PW '[chars], [chars]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the pseudowire has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.

Error Message     
 
    
    
   

%L2-L2VPN-4-PROVISIONING_WARNING L2VPN sanity check failed for Attachment Circuit on node [chars]: [chars]. Limit is [dec]

Explanation    An internal error has been encountered and the Attachment Circuit cannot be established.

Recommended Action    Verify that the number of Attachment Circuits (AC) on the router does not exceed the L2VPN scaling capability for that line card. It may get resolved by removing the configuration for the ACs that are in UR or DN state including the ones identified in this message. Then re-configure the required ACs without exceeding the node limit.

Error Message     
 
    
    
   

%L2-L2VPN-5-BD_STATE_CHANGED State of Bridge Domain [chars] (BD ID: [unsigned int]) has been changed to [chars]

Explanation    The state of specified BD, with the BD ID, has been changed. The possible states are: - up - down - admin down The trigger of the BD state change are: - Shut/No Shut BD from CLI - BD operational state changed

Recommended Action    None. To suppress this IOS message, please unconfigure 'l2vpn logging bridge-domain status'.

Error Message     
 
    
    
   

%L2-L2VPN-5-NO_LICENSE L2VPN AC manager could not get a license for node [chars], [chars]

Explanation    License is required for L2VPN feature to work, but AC manager could not get a license for the node from License manager.

Recommended Action    Install license for the feature.

Error Message     
 
    
    
   

%L2-L2VPN-6-BRIDGE_MTU_MISMATCH_CLEAR [chars] mtu of [dec] now matches bridge mtu

Explanation    The interface MTU now matches the bridge payload MTU.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-ENCAP_REMOVED_PW_CLEAR Unresolved pseudowire encapsulation has been resolved for pw-class '[chars]'

Explanation    Encapsulation in the pw-class is set, all pseudowires attached to this pw-class should be out of the unresolved state.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_AC_CLEAR Number of MAC addresses in AC '[chars]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_AC_SET Number of MAC addresses in AC '[chars]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_BD_CLEAR Number of MAC addresses in bridge-domain '[chars]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the bridge-domain due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_BD_SET Number of MAC addresses in bridge-domain '[chars]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the bridge-domain has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_PW_CLEAR Number of MAC addresses in PW '[chars], [chars]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the pseudowire has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_PW_SET Number of MAC addresses in PW '[chars], [chars]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the pseudowire has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

LACP_LITE Messages

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_LL_DLL_ASYNC_SEND_FAIL Send async pulse to lacp lite process fails; Error [chars]

Explanation    Attempt to send pulse to LACP lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_LL_DLL_CHAN_CONNECT_FAIL Cannot connect to lacp lite process; Error [chars]

Explanation    Attempt to connect to LACP lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_UNAVAILABLE LACP lite SHMEM can accommodate only [dec] records (request for [dec] records)

Explanation    BM-Local has requested transfer of more interface records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_UNSUPPORTED_FLAG LACP lite API is called with unsupported flag (request for [dec])

Explanation    BM-Local has called LACP lite API with unsupported flag

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

LC Messages

Error Message     
 
    
    
   

%L2-LC-0-TESTEMERG [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-1-TESTALERT [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-2-TESTCRIT [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-3-BMA_CHKPT Call to [chars] failed, chkpt_status equals [hex]

Explanation    The library call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA_CHKPT_NOINIT Error initializing checkpointing table.

Explanation    The driver was not able to initialize a table to store checkpointed data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA_CHKPT_NORESTORE The driver was not able to restore '[chars]' from checkpointed data.

Explanation    No checkpointing record was found in the table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA_CHKPT_NOSAVE The driver was not able to save '[chars]' in checkpointed data.

Explanation    BMA buffer carve information could not be saved in the checkpoint record.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA_CHKPT_RECOVERY_NODATA The driver is coming up in RECOVERY_MODE, but the checkpoint info does not exist.

Explanation    When a driver comes up in RECOVERY_MODE, checkpointing data should have already been saved to the checkpointing record by the previous life of the driver.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA_DI_INVALID_MODE DI started the driver in an invalid mode: [hex]

Explanation    The Driver Infrastructure (DI) started the driver in an invalid or unsupported mode.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMA48ERR [chars] BMA error: stat_reg [hex] adr [hex] data [hex] qm [hex] plim [hex] l3 [hex] ms [hex] sdram [hex]

Explanation    There is an error in the BMA (reg. information).

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMA48ERRS [chars] BMA48 [chars] error [hex]

Explanation    There is an error in the BMA48.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMA48FIM [chars] BMA48 [chars] error fim_cf_status [hex]; fim_df0: adr [hex] data [hex]; fim_df1: adr [hex] data [hex]; fim_df2: adr [hex] data [hex]; fim_df3: adr [hex] data [hex]

Explanation    There is an error in the BMA.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMABUFF [chars] BMA has [unsigned int] buffers in queue [unsigned int] when maximum of [unsigned int] are allowed

Explanation    Number of buffers in one of the BMA queues has overflowed.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMACMDFTCH Problem in BMA command fetching, status equals [dec] [chars] BMA

Explanation    The BMA encountered problems while trying to fetch the given command. If appears more than once we may have a HW problem. The GRP should recognize a lost of communication with the LC and reload it.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-BMACMDLOST [chars] BMA has lost a command

Explanation    The given BMA has lost a command. If appears more than once we may have a HW problem. The GRP should recognize a lost of communication with the LC and reload it.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-BMACMDRPLY Problem in BMA reply to command type [dec] [chars] BMA sequence no equals [dec]

Explanation    There was a problem in the reply to the given BMA command. If appears more than once we may have a HW problem. The GRP should recognize a lost of communication with the LC and reload it.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAERR [chars] error: msstat [hex] dma0 [hex] dma1 [hex] dma2 [hex] qm [hex] plim [hex] fia [hex] l3 [hex] ms [hex] sdram [hex]

Explanation    There is an error in the BMA (reg. information).

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAERRS [chars] [chars] error [hex]

Explanation    There is an error in the BMA.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAERRSS [chars] [chars] error [hex] [chars] [hex]

Explanation    There is an error in the BMA.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAMEM [chars] SDRAM data error [hex] in address [hex]

Explanation    Packet memory parity error. Each bit (0-15) set in data error word represents a parity error in one byte of the errored location in memory. Bits 16 and 17 of data error word, if either is set, indicate the error happened during CPU access to the packet memory, otherwise it is during normal operation. Address represents the offset of the memory location being accessed from the beginning of packet memory on the side mentioned (to or from fabric.) This error indicates a possibly temporary problem in either the packet memory device or the BMA.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LC-3-BMASDRAM_BADCAS_LATENCY [chars] DIMMs do not support CAS latency needed. got [hex]

Explanation    SDRAM DIMM modules installed in BMA SDRAM DIMM sockets do not support CAS latency needed. CAS latency is specified in the DIMM EEPROM as a number. When converted to a binary number, each bit corresponds to one CAS latency. Bit 2 must be set to 1, indicating that a CAS latency of 3 is supported.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMASDRAM_BADSIZE [chars] DIMMs are of unsupported size. Read this: rows [dec], cols [dec], DIMM banks [dec], SDRAM Device banks [dec]

Explanation    SDRAM DIMM modules installed in BMA SDRAM DIMM sockets are of unsupported size.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMASDRAM_BADWIDTH [chars] DIMMs have unsupported data width, expected [dec], got [dec]

Explanation    SDRAM DIMM modules installed in BMA SDRAM DIMM sockets have unsupported data width.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMASDRAM_NOTMATCH [chars] SDRAM DIMMs do not match

Explanation    SDRAM DIMM modules installed in to Fabric or from Fabric BMA DIMM0 and DIMM1 sockets do not match. While the DIMMs on one side (to Fabric) could be different from the DIMMs on the other side (from Fabric), the two DIMMs on the same side have to be identical. Also, all four DIMMs need to be mounted and making proper contact.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAUCODE_GET [chars] BMA: feature [chars], line card type [chars], could not get [chars] BMA microcode

Explanation    For the BMA microcode download command, failed to get the given BMA microcode bundled in the image.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAUCODE_LCTYPE [chars] BMA: feature [chars], specified linecard type(s) ([hex]) ! equals current ([hex])

Explanation    For the BMA microcode download command, there was a mismatch between what was specified in the BMA microcode file and the current type of line card

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-BMAUCODE_NULL --

Explanation    --

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-CARVE_BUFHDRS [chars] BMA: out of SDRAM buffer headers

Explanation    Ran out of available SDRAM buffer headers while attempting to carve buffers. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-CARVE_BUFSIZE [chars] BMA: illegal specified/real SDRAM buffer size(s) equals ([unsigned long int],[unsigned long int]). Range equals ([dec],[dec])

Explanation    The calculated SDRAM buffer size (in bytes and including header and data portions), is not within the given range. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_EXBUFS [chars] BMA: [unsigned int] SDRAM buffers max ([unsigned int])

Explanation    The maximum number of SDRAM buffer headers is limited to a maximum number which has been exceeded. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_EXFREEQS [chars] BMA: [unsigned int] free queues max ([unsigned int])

Explanation    Number of free queues allowed for SDRAM buffer carving has been exceeded. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_EXPCT [chars] BMA: [unsigned int] sum SDRAM buffer percentages 100

Explanation    The sum of percentages per SDRAM buffer size has exceeded 100. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_EXSDRAM [chars] BMA: used SDRAM ([unsigned long long int] bytes) available for carve ([unsigned long int] bytes)

Explanation    The calculated sum of SDRAM to be carved is larger than the available SDRAM for carving. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_NOFREEQS [chars] BMA: no more free queues

Explanation    There are no more available free queues which can be used for SDRAM buffer carve. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_PARMS [chars] BMA: equals 1 SDRAM bufmem parameters equals equals 0

Explanation    This is an internal parameter error with one or more SDRAM buffer memory parameters: maximum buffer header count or SDRAM sizes (total, not available for carve, and available for carve

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_QELEM [chars] BMA: [unsigned int] Queue Manager SRAM elements max ([unsigned int])

Explanation    Ran out of Queue Manager elements, which are used for SDRAM buffer carving. This could be a cause of SDRAM buffer carve failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-CARVE_QMREAD BMA address [hex]: Queue Manager SRAM [hex], read error(s)

Explanation    This happened during Queue Manager SRAM initialization. Reading one or more zeroed Queue Manager SRAM locations gave a non-zero result. Possible errors are in head, tail, length, length threshold, buffer address, next queue element, or scratch RAM locations.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-DOWNREV BMA is an old version.

Explanation    The system software detected an old version of the BMA.

Recommended Action    Call your technical support for an upgraded version.

Error Message     
 
    
    
   

%L2-LC-3-IICDEV_NOTACKADDR IIC Device [dec] failed to ack address

Explanation    BMA SDRAM DIMM failed to acknowledge address. This is an SDRAM IIC bus protocol error.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-IICDEV_NOTACKREAD IIC Device [dec] failed to ack read command

Explanation    BMA SDRAM DIMM failed to acknowledge read command. This is an SDRAM IIC bus protocol error.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-IICDEV_NOTRESPOND IIC Device [dec] does not respond, perhaps absent

Explanation    BMA SDRAM DIMM does not respond, perhaps absent.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-INIT_CARD_TYPE Unknown card type ([hex])

Explanation    A card was either manufactured improperly, has failed, or is newer than the software

Recommended Action    Replace the card or upgrade the software

Error Message     
 
    
    
   

%L2-LC-3-INIT_MEM Memory failure, addr [hex], read [hex]%08x, not [hex]%08x

Explanation    Initialization of the memory address failed.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-INIT_READ Error reading memory at [hex]

Explanation    Failed to read the given memory location.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-INIT_RESET Failed to take line card out of reset

Explanation    Initialization of the line card IO registers failed.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-INIT_ZERO No bytes to write to location [hex]

Explanation    No bytes were written to the given location.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-INVQ Invalid local output queue: [hex] [hex] [hex] [hex] [hex] [hex]

Explanation    The above packet was routed to an invalid queue. The data shown is the packet header.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-L3FEERR L3FE error: rxbma [hex] addr [hex] txbma [hex] addr [hex] dram [hex] addr [hex] io [hex] addr [hex]

Explanation    There was an error in the line card's L3FE ASIC (reg. information).

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-L3FEERRS L3FE [chars] error [hex] address [hex]

Explanation    There was an error in the line card's L3FE ASIC.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-LC_CODE_DLD_ALLOC Failed buffer allocation for code download

Explanation    Could not allocate a data buffer to contain contents of the given linecard downloaded file. There may be insufficient DRAM.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-LC_CODE_DLD_CHKSUM code download IPC data checksum error

Explanation    For the GLC code download command, failed the checksum verification.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-LC_CODE_PROG no downloaded code to program

Explanation    For the GLC code program command, no downloaded code to program.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-LOOKUP_ERROR Hardware assist lookup error [hex] in memory encountered

Explanation    Memory corruption detected.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-MACSTR Adj/midb ([chars]) has incorrect high word ([hex]) in its mac string

Explanation    The line card CEF/MDS received an adjacency/midb with the incorrect mac rewrite string. Packets forwarded to that adjacency/midb will be dropped.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-OUTINFO Adj/midb([chars]): incorrect output_info equals [hex] maclen equals [dec]

Explanation    The line card CEF/MDS received an adjacency/midb with the incorrect output_info field. Packets forwarded to that adjacency/midb will be dropped.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-3-PARITYERRTTM48 Parity error in memory encountered

Explanation    One bit memory corruption detected.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-SELECTOR [dec]: unknown BMA selector value

Explanation    An unknown BMA selector value was encountered.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative

Error Message     
 
    
    
   

%L2-LC-3-TESTERR [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-4-CARVE_JVMASK [chars] BMA: suspect return value [dec] on quiesce-for-carve

Explanation    The BMA quiesce-for-carve algorithm retrieved a bad jump vector mask return value. This could indicate an error in the quiesce.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-4-CARVE_TIME [chars] BMA: quiesce-for-carve exceeded timeout ([dec] ms) in [chars] loop, [dec] times

Explanation    The BMA quiesce-for-carve algorithm waits an allotted time for line card queues to flush. One or more waits exceeded this allotted time. These queues are specific to the line card's ASICs. This error message might not actually indicate an error - the allotted time might not be sufficient and should be increased.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-LC-4-TESTWARNING [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-5-TESTNOTICE [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-6-TESTINFO [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

Error Message     
 
    
    
   

%L2-LC-7-TESTDEBUG [chars]

Explanation    Test message for software test.

Recommended Action    Stop typing LC test logger.

MARVEL Messages

Error Message     
 
    
    
   

%L2-MARVEL-3-CHAN_CREATE Failed to create channel : [chars]

Explanation    Failed to create marvel-test (driver) channel using event_manager_create.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_INIT Debug initialization failed

Explanation    Initialization of the debug event failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_REG Debug registration failed : [chars]

Explanation    debug_register() call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-EVENT_MGR_FAIL [chars] : [chars]

Explanation    Generic failure of any event manager API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MMAP Failed to map device address : [chars]

Explanation    mmap() system call failed to map the device physical address.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MSG_REPLY Failed to send reply message : [chars]

Explanation    This error is reported when msg_reply() (LWM call) fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-NOMEM Failed to allocate memory

Explanation    This error is reported when malloc()/calloc() type system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-OPEN Failed to open file [chars] : [chars]

Explanation    This error is generated when the open() system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-6-RX_ASYNC_MSG Invalid asynchronous message received.

Explanation    This error is generated when an invalid asynchronous message is received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

METRO_STATS_API Messages

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-DEBUG_MSG Debug Msg : [chars]: [chars]

Explanation    --

Recommended Action    No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-ERR_DLL_INIT DLL INIT : [chars]: [chars]

Explanation    This error indicates that there was an error while initializing the stats dll.

Recommended Action    No action is required. The process is restarted automatically.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-ERR_THREAD Locking issues: [chars]: [chars]

Explanation    This error indicates that the Hardware Stats Manager Library is unable to initialize/destroy locking for client's attributes and tables.

Recommended Action    An error was returned by Stats Manager APIs to applications. Applications receiving this error will report it. Take recommended actions specified in the application's error message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-RESERVE_LMT_MSG Stats Counters Exhausted Msg : [chars] [dec] [chars] [dec] [chars] [chars]

Explanation    This is a debug message in the Hardware Stats Manager Library to indicate the stats reserve limit is reached. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client tries more counters than that are free for that type

Recommended Action    No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.

METRO_STATS Messages

Error Message     
 
    
    
   

%L2-METRO_STATS-7-ERR_EXHAUST Stats Exhausted: [chars] [chars] [chars] [dec] [chars] [dec] [chars] [dec]

Explanation    This is a debug message in the Hardware Stats Manager to indicate the stats counters of the particular stat type is exhausted. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client tries more counters than that are free for that type

Recommended Action    No action is required. These are Debug messages. An error was returned by Stats Manager to applications. Applications receiving this error will report the error.

Error Message     
 
    
    
   

%L2-METRO_STATS-7-ERR_INIT [chars]: [chars]

Explanation    These errors are encountered at mstats process initialization time. The types of errors are: 1 Unable to determine hardware version. 2 Unable to create event manager. This will prevent stats process from receiving events. 3 Unable to create timer. 4 Unable to initialize client database. This will result in clients not being able to register with stats server to collect stats. 5 Unable to allocate Ingress/Egress stats. This will result in Stats manager not being able to maintain/update any hardware stats. 6 Unable to register with debug. This will prevent stats process from logging debug messages. 7 Unable to initialize or register with checkpoint service. This will prevent stats manager from restoring the information required at restart. 8 Unable to connect with SYSDB. This includes failure to connect, bind, register with SYSDB. 9 Unable to Initialize hardware packet service.

Recommended Action    No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-METRO_STATS-7-ERR_MEM Memory error: [chars]: [chars]

Explanation    An error occurred in Hardware Stats Manager during shared memory operations. This may be because the system is running low on memory. The types of errors are: 1 Cannot open/reset/close shared memory window 2 Cannot allocate/free shared memory. This will cause Stats Server to not be able to have a shadow copy of stats for all clients.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

MFR_EA_LTRACE_DLL Messages

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE_DLL-3-OPER_FAIL ltrace dll : [chars]

Explanation    MFR EA ltrace dll operation failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_EA_LTRACE Messages

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-ERROR_INIT_FAIL ltrace initialization operation failed for error traces: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the error ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-EVENT_INIT_FAIL ltrace initialization operation failed for events: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the events ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-INTERNAL_INIT_FAIL ltrace initialization operation failed for internal traces: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the internal ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_EA Messages

Error Message     
 
    
    
   

%L2-MFR_EA-2-DPC_CALL_FAILED MFR EA failed handling a DPC [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The MFR EA process initialization failed whilst trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-INTERFACE_OPERATION_FAILED Interface [chars] operation failed for ifhandle [hex] err: [chars]

Explanation    The MFR EA process failed whilst trying to change interface state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_AIB_REMOVE_FAILED Failed during AIB remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove entry from AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_AIB_SET_FAILED Failed during AIB set , err: [chars]

Explanation    The MFR EA process failed whilst trying to insert entry to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_CAPS_ADD_FAILED Failed during caps set, err: [chars]

Explanation    The MFR EA process failed whilst trying to set caps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_CAPS_REMOVE_FAILED Failed during caps remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove caps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_ENCAP_REMOVE_FAILED Failed during encaps remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove encaps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_ENCAP_SET_FAILED Failed during encaps set, err: [chars]

Explanation    The MFR EA process failed whilst trying to set encaps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_INFO_COLLECT_FAILED Failed to collect member link information, err: [chars]

Explanation    The MFR EA process failed whilst trying to collect member link info.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-NO_STATS Failed to initialize MFR interface stats collection, err: [chars]

Explanation    The MFR EA interface stats collection initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-STATE_CHANGE_FAILED Failed during interface state change, err: [chars]

Explanation    The MFR EA process failed whilst trying to change interface state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_MA Messages

Error Message     
 
    
    
   

%L2-MFR_MA-2-FAIL MFR MA failed to [chars]. Thread id is [dec]. [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-DPC_ERROR [chars] [hex] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ENCAP Unable to process mfr encapsulation request

Explanation    An error occurred processing a request to set mfr encapsulation on an interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_MEMBER_ADD Cannot add [chars] to bundle with nodeid [hex] and group [dec]

Explanation    Could not find the bundle interface with the nodeid and group. Hence cannot add the member interface to bundle.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_MUTEX_LOCK Mutex lock failed. [chars]

Explanation    Locking the mutex governing the access to MFR MA IDB database failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_PULSE Received unexpected Async Event [hex] for ifhandle [hex]

Explanation    IPC thread received an async event pulse for which there is no handler.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERROR [chars] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-THREAD_ERROR [chars] . Thread id is [dec]. [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT Unexpected error encountered whilst [chars]: [chars]

Explanation    MFR MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT_CORRUPT Corrupt [chars] checkpoint record found: [chars]

Explanation    Whilst restoring one of its checkpoint tables MFR MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's MFR session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT_DUPLICATE Duplicate [chars] checkpoint record found for [chars]

Explanation    Whilst restoring one of its checkpoint tables MFR MA found multiple entries for the same interface. MFR MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, MFR MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_MGD_TIMER Unexpected error encountered whilst [chars]: [chars]

Explanation    MFR MA encountered an unexpected error using the Managed Timer library. This is most likely due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Consider restarting the MFR MA process. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars]

Explanation    MFR MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-6-SENDTO Packet send attempt timed out: [chars]

Explanation    The socket call to send a control packet timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MICKEY Messages

Error Message     
 
    
    
   

%L2-MICKEY-2-INTR Mickey Intr: [chars]: [dec]: [dec]

Explanation    A high severity error has interrupted the Mickey FPGA. This might result in the PLIM being reset. %s - Error message %d - Interrupt %d - Mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MICKEY-5-UNKNOWN_INTR Unknown Mickey Intr: [chars]: [dec]: [dec]

Explanation    This message indicates the Mickey FPGA has detected an unknown interrupt. %s - Error message %d - Status register %d - Interrupt mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MLCTRLR Messages

Error Message     
 
    
    
   

%L2-MLCTRLR-2-NOMEM [chars]([dec]): not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

Error Message     
 
    
    
   

%L2-MLCTRLR-3-ERROR [chars]([dec]): [chars] failed ([chars]) - [chars]

Explanation    A general failure occurred while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-ALARM [chars]: [chars] [chars]

Explanation    The specified MLCTRLR Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-FEAC [chars] [chars]

Explanation    New Far End Alarm Code received.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-LOOPSTATUS [chars] [chars]

Explanation    A configurable controller loopback status.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-UPDOWN [chars]: [chars] [chars]

Explanation    The specified MLCTRLR is operationally down due to alarm. Check alarm status using show controller Mlt command on the cli.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-WARNING [chars]([dec]): [chars] - [chars]

Explanation    A non-fatal error occurred while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

MMSMLIB Messages

Error Message     
 
    
    
   

%L2-MMSMLIB-4-EXIT_ON_ERR [chars]. Reason: [chars]

Explanation    An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-MMSMLIB-4-EXIT_ON_ERR [chars]. Reason: [chars]

Explanation    An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.

Recommended Action    *RECUR*

MOTHRA Messages

Error Message     
 
    
    
   

%L2-MOTHRA-3-FATAL_ERROR Fatal error: [chars]: [chars]: [hex]

Explanation    A fatal error occurred in mothra Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-3-PIO_FATAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A fatal error occurred in Santa Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the mothra driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-MOTHRA-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the mothra driver to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MOUSE Messages

Error Message     
 
    
    
   

%L2-MOUSE-2-INTR Mouse Intr: [chars]: [dec]: [dec]

Explanation    A high severity error has interrupted the Mouse FPGA. This might result in the PLIM being reset. %s - Error message %d - Interrupt %d - Interrupt Mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOUSE-5-UNKNOWN_INTR Unknown Mouse Intr: [chars]: [dec]: [dec]

Explanation    This message indicates the Mouse FPGA has detected an unknown interrupt. %s - Error Description %d - Status register %d - Interrupt mask

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MRP_MAD Messages

Error Message     
 
    
    
   

%L2-MRP_MAD-3-INVALID_MRPDU CH[hex]: Received an MRPDU which could not be decoded. Stage: [chars]

Explanation    An MRPDU packet has been received which MRP could not decode.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-MRP_MAD-3-INVALID_MRPDU_RC CH[hex]: Received an MRPDU which could not be decoded. Stage: [chars]: [chars]

Explanation    An MRPDU packet has been received which MRP could not decode.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-MRP_MAD-3-MALLOC_FAILURE A memory allocation failure has occurred from which MRP could not recover

Explanation    A memory allocation has failed in a situation where MRP cannot continue without possibly being in the wrong state.

Recommended Action    Restart the MRP application.

MULTILINK_UV Messages

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconstent state.

Explanation    The Multilink Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occurred in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Multilink Messages

Error Message     
 
    
    
   

%L2-Multilink-3-INCORRECT_BW_UPDATE Bundle [chars] with bandwidth [dec]. Link ifh [hex] with bandwidth [dec]

Explanation    When the indicated member link was deactivated, bundle bandwidth could not be updated correctly as decrementing the link's bandwidth would have made the bundle bandwidth to go below zero. Bundle bandwidth is now made zero.

Recommended Action    Check the bundle and member interface status. Verify that the bundle bandwidth is correct now. If not, shut all the members of the bundle and then no shut all the members to bring back the bundle bandwidth to correct value.

Error Message     
 
    
    
   

%L2-Multilink-3-ML_GROUP_FAILURE Failed to add/remove serial link [chars] into multilink bundle [chars]

Explanation    The link addition/removal from a Multilink bundle has failed due to a software error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-Multilink-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-Multilink-4-ALARM [chars]: [chars] [chars]

Explanation    The specified Multilink Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

MVRP Messages

Error Message     
 
    
    
   

%L2-MVRP-4-INITIALISATION_FAILURE Failed to initialize [chars] in [chars] process: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    The process will automatically exit and will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MVRP-4-L2VPN_FLUSH MVRP failed to initiate VLAN ID flush with L2VPN after one second of retrying: [chars]

Explanation    The MVRP IO process has failed to initiate VLAN ID flush with L2VPN after five seconds of retrying. Further retries will be attempted every 3 seconds. Until the flush succeeds the currently registered VLAN IDs may be inconsistent.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MVRP-4-MAD_INIT_FAILED MVRP failed to reinitialize with the MAD following a change in bridging configuration: [chars]

Explanation    The MVRP IO process has failed to reinitialize with the MAD following a change in bridging configuration. Periodic retries will occur to successfully reinitialize with the MAD. Until the MAD is initialized the protocol will not run.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MVRP-4-PROBLEM_EXITING Failed to notify SysMgr of intention to exit: [chars]