Cisco IOS XR System Error Message Reference Guide, Release 3.9.1
Quality of Service (QoS) Messages
Downloads: This chapterpdf (PDF - 406.0KB) The complete bookPDF (PDF - 54.82MB) | Feedback

Quality of Service (QoS) Messages

Table Of Contents

Quality of Service (QoS) Messages

AFMON_EA_TEST Messages

AFMON_MA Messages

EFCM Messages

PAL_QOSEA Messages

QOS_EA_ANCP_LIB Messages

QOS_EA_IIR_ADD_FAIL Messages

QOS_EA_INIT Messages

QOS_EA_MODIFY_FAIL Messages

QOS_EA_TEST Messages

QOS_EA_VERIFY Messages

QOS_FIFO Messages

QOS_LIB_PLMGR_SUPP Messages

QOS_MA Messages

QOS_TXM Messages

QOS Messages

QOSEA Messages

QOSLIB Messages

QOSRM_DLL Messages

QOSRM Messages


Quality of Service (QoS) Messages


This section contains all Quality of Service related System Error Messages.

AFMON_EA_TEST Messages

Error Message    
 
    
    
   

%QOS-AFMON_EA_TEST-3-ERROR AF-Mon Test EA error occurred at function [chars]:[unsigned int] - [chars]

Explanation    The AFMon EA test process encountered the specified error

Recommended Action    None

AFMON_MA Messages

Error Message    
 
    
    
   

%QOS-AFMON_MA-3-CAPS_REMOVE Afmon MA caps remove failed: caps: [unsigned int], ifhandle: [hex], error: [chars]

Explanation    The AFMon MA process encountered the specified error while trying to remove the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-AFMON_MA-7-INIT AFMon MA initialization failed in function [chars]: [chars]

Explanation    The Afmon MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the Afmon MA process.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-AFMON_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.

Explanation    The Afmon MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the AFMON MA DB. This could be the result of an incorrect operation in the'verify' phase.

Recommended Action    None

EFCM Messages

Error Message    
 
    
    
   

%QOS-EFCM-3-ERROR EFCM-Err: [chars]

Explanation    This is an error message from the EFCM, it indicates that something has gone wrong internally in the EFCM.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-EFCM-6-INFO EFCM-Info: [chars]

Explanation    This is an informational message from the EFCM

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-EFCM-7-DEBUG EFCM-Debug: [chars]

Explanation    This is a debuging message from the EFCM

Recommended Action    *NONE*

PAL_QOSEA Messages

Error Message    
 
    
    
   

%QOS-PAL_QOSEA-3-STATS_ERROR PAL-QoSEA-Err: [chars]

Explanation    This is an error message from the PAL QoS EA Process, it indicates that something has gone wrong during statistics processing or retrieval.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-PAL_QOSEA-4-STATS_WARN QoSEA-Warn: [chars]

Explanation    This is a warning message from the QoS EA Process

Recommended Action    *RECUR*

QOS_EA_ANCP_LIB Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_ANCP_LIB-6-ERROR QoS EA Internal error. ANCP library [chars] operation failed: [chars]

Explanation    The QoS EA encountered an internal error in ANCP lib

Recommended Action    Correct the qos policy.

Error Message     
 
    
    
   

%QOS-QOS_EA_ANCP_LIB-6-ERROR QoS EA Internal error. ANCP library [chars] operation failed: [chars]

Explanation    The QoS EA encountered an internal error in ANCP lib

Recommended Action    Correct the qos policy.

QOS_EA_IIR_ADD_FAIL Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_IIR_ADD_FAIL-3-ERROR service-policy [chars] [chars] on interface [hex] member [hex] [chars], [chars]

Explanation    The QoS EA notification while adding policy on the bundle interface specified.

Recommended Action    Verify the bandwidth values. Remove the qos policy and reattach. Fix errors in the policy, if any.

QOS_EA_INIT Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

QOS_EA_MODIFY_FAIL Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

QOS_EA_TEST Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_TEST-3-ERROR QoS EA error [chars]: [chars]

Explanation    The QoS EA process encountered the specified error

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_EA_TEST-3-ERROR QoS EA test error ocured at function [chars]: [chars]

Explanation    The QoS EA test process encountered the specified error

Recommended Action    None

QOS_EA_VERIFY Messages

Error Message    
 
    
    
   

%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]

Explanation    The QoS EA policy verification encountered the specified error

Recommended Action    Correct the qos policy.

Error Message     
 
    
    
   

%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]

Explanation    The QoS EA policy verification encountered the specified error

Recommended Action    Correct the qos policy.

QOS_FIFO Messages

Error Message    
 
    
    
   

%QOS-QOS_FIFO-7-DEBUG_INIT_ERROR An error occurred during debug initialization. Error: [chars]

Explanation    The QoS FIFO dll encountered a problem while initializingg the debug facility. This is not a fatal error. QoS FIFO will continue to execute properly, but will not be able to use the debugging facility.

Recommended Action    None

QOS_LIB_PLMGR_SUPP Messages

Error Message    
 
    
    
   

%QOS-QOS_LIB_PLMGR_SUPP-3-ERR_LTRACEOPEN Error opening ltrace file '[chars]' : QoS lib ltraces will not work

Explanation    Qos lib had trouble opening ltrace file.

Recommended Action    '*SUPPORT*'

QOS_MA Messages

Error Message    
 
    
    
   

%QOS-QOS_MA-3-CAPS_INFO_ADD QoS MA caps add failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], service_policy: [chars], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to add the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-CAPS_REMOVE QoS MA caps remove failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to remove the caps.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-DPC_REM QoS MA DPC (delete) failed: ifhandle: [hex], caps: [unsigned int], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to send a critical operation to the EA.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-IFH_BW_UPDATE_RATE QoS MA bandwidth update failed: ifhandle: [hex], bandwidth: [unsigned int], error: [chars]

Explanation    The QoS MA process encountered the specified error while trying to update it's database with the new bandwidth update from ANCP or Ifmgr.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-INVALID_BW_ENTRY Invalid bandwidth entry in QoS-MA bandwidth table: ifhandle: [hex], bandwidth: [unsigned int]

Explanation    The QoS MA process encountered an invalid entry while receiving updates from ANCP or Ifmgr.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-3-OP_FAIL [chars] Error [hex]:[chars]

Explanation    A critial operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features.

Recommended Action    None.

Error Message     
 
    
    
   

%QOS-QOS_MA-7-FABQOS_SEND_FAILED The switch-fabric service policy '[chars]' was not accepted correctly by the EA. Error: [chars]

Explanation    The QoS MA process encountered the specified error upon startup or restart. The EA did not process the FABQOS policy correctly.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INIT QoS MA initialisation failed in function [chars]: [chars]

Explanation    The QoS MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the QoS MA process.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.

Explanation    The QoS MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the QOS MA DB. This could be the result of an incorrect operation in the'verify' phase.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_MA-7-INVALID_ERROR_ARRAY_STATUS The dpc error array '[hex]' and caps error array '[hex]' have invalid codes at the same index '[dec]'.

Explanation    An internal error was encountered while processing QoS configuration.

Recommended Action    None

QOS_TXM Messages

Error Message    
 
    
    
   

%QOS-QOS_TXM-7-DEBUG_INIT_ERROR A error occurred during debug initialization, err: [chars]

Explanation    The QOS TXM process encountered an error while initializing the debug facility. This is not a fatal error. QOS TXM will continue to execute properly, but will not be able to use the debugging facility.

Recommended Action    None

Error Message     
 
    
    
   

%QOS-QOS_TXM-7-UNINITIALISE_ERROR An error occurred in initialization sequence for iface: [chars]

Explanation    The QOS TXM process encountered an error in its initialsation sequence. This is a serious error. QOS TXM functioning correctly is not guranteed depending upon the exact problem in initialisation sequence

Recommended Action    None

QOS Messages

Error Message    
 
    
    
   

%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]

Explanation    The router cannot allocate more memory.

Recommended Action    It may be necessary to free some memory by exiting a program.

Error Message     
 
    
    
   

%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]

Explanation    Connection to some server failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services

Explanation    Error occurred while waiting for an event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_IIR_ATTACH_FAILURE Error encountered during QoS programming for bundle member [chars] (ifh: [hex]) of bundle CH[hex], direction: [chars], error: [chars]

Explanation    A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member.

Recommended Action    If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_IM_CAPS_RESYNC_FAILURE Error encountered during caps resync with IM for interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]

Explanation    QoS EA encountered an error during resync of QoS capsulations with IM.

Recommended Action    Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.

Error Message     
 
    
    
   

%QOS-QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY Error encountered during rollback of policy modification on interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]

Explanation    QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.

Recommended Action    Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.

Error Message     
 
    
    
   

%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager

Explanation    Failed to create event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event

Explanation    Error occurred while waiting for an event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%QOS-QOS-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process has exited and restarted.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%QOS-QOS-6-EA_DEBUG_INIT_FAIL Failed to initialise debug infra within QoS EA. Error: [chars]

Explanation    Debug initialization failed within EA. Debugs may not be printed

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_LTRACE_INIT_FAIL Failed to initialise ltrace infra within QoS EA. Error [chars]

Explanation    Ltrace initialization failed within EA. Ltraces may not be printed

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_MIPC_NTFN_ACK_FAILURE Error encountered while trying to ACK to an MIPC event notification [unsigned int]. Error [chars]

Explanation    QoS EA encountered an error while ACKing to an MIPC event

Recommended Action    Try restarting QoS EA process

Error Message     
 
    
    
   

%QOS-QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE Failed to process MIPC notification [unsigned int] within QoS EA. Error [chars]

Explanation    QoS EA encountered an error while processing an MIPC event notification

Recommended Action    Try restarting QoS EA and/or HFR Platform Manager process

Error Message     
 
    
    
   

%QOS-QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q to [dec]. Dropping packet. Error: [chars]

Explanation    Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%QOS-QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to initialise debug infra within the qfifo node on the netio chain. Error: [chars]

Explanation    Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed.

Recommended Action    Try restarting netio process

Error Message     
 
    
    
   

%QOS-QOS-7-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]

Explanation    Connection to IMP server failed during process init. This could be because QoS EA is - Unable to bind to the IMP server, - Unable to map context to connection ID, - Unable to register callback handler, or - Unable to initialise event handler for connect/ disconnect events The above situations would lead to an inability of QoS EA to process CAPS from MA (via IM/IMP infrastructure), and to a potential disconnect between the hardware/software views of the configured qos policies on the system.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%QOS-QOS-7-ERR_EVM_CREATE Failed to setup event manager

Explanation    Failed to setup event manager.

Recommended Action    No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

QOSEA Messages

Error Message    
 
    
    
   

%QOS-QOSEA-3-BM_ADD_REMOVE_ERROR QoSEA-Err: Bundle Member Add/Remove: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong in QoS EA while adding/removing a bundle member. Error can happen with/without QoS on bundle.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-3-BWCHG_ERROR QOSEAERR: update bandwidth for ifh [hex] with [dec] [chars] [chars] [chars]

Explanation    This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth change.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-ERROR QoSEA-Err: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-EXIT_ERROR QoSEA-Err: [chars] [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-IMATTR_ERROR QOSEAERR: im_attr_get bandwidth [chars] [hex] Error: [chars]

Explanation    This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth attribute get.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS EA could not create the necessary message channel due to the given error

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSEA-3-MSG_HANDLER_ERR An error occurred in the [chars] message handler

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-3-POLICY_ERROR QoSEA-Err: class:[chars], [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that something has gone wrong while trying to configure a service policy.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-3-ROLLBACK_ERROR QoSEA-Rollback-Err: [chars]

Explanation    This is an error message from the QoS EA Process, it indicates that rollback failed in the QoS EA.

Recommended Action    Pls analyse the resource availability in the LC. Remove and add the qos policy-map for the interface.

Error Message     
 
    
    
   

%QOS-QOSEA-3-UNHANDLED_MSG The QoS EA received an unhandled message

Explanation    The QoS EA received a message that it was unable to handle'

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSEA-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSEA-4-WARN QoSEA-Warn: [chars]

Explanation    This is a warning message from the QoS EA Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-5-NOTICE QoSEA-Notice: [chars]

Explanation    This is a notice message from the QoS EA Process

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]

Explanation    This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-INFO QoSEA-Info: [chars]

Explanation    This is an informational message from the QoS EA Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSEA-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS EA received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-6-POLICY_INFO QoSEA-Info: class:[chars], [chars]

Explanation    This is an informational message from the QoS EA Process. It indicates that something can not be configure in service policy.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSEA-7-DEBUG QoSEA-Debug: [chars]

Explanation    This is a debuging message from the QoS EA Process

Recommended Action    *NONE*

QOSLIB Messages

Error Message    
 
    
    
   

%QOS-QOSLIB-3-ERR_DLCLOSED Error CLosing DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly

Explanation    The Qos lib had trouble closing DLL.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%QOS-QOSLIB-3-ERR_DLOPEN Error openening DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly

Explanation    The Qos lib had trouble opening DLL.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

QOSRM_DLL Messages

Error Message    
 
    
    
   

%QOS-QOSRM_DLL-3-ERROR QoSRM-DLL-Err: [chars]

Explanation    This is an error message from the QoS RM DLL, it indicates that something has gone wrong internally in the QoS RM dll.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS RM dll could not create the necessary message channel due to the given error

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-MSG_HANDLER_ERR An error ([chars]) occurred in the [chars] message handler,Msg:[hex]

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNHANDLED_MSG The QoS RM dll received an unhandled message

Explanation    The QoS RM dll received a message that it was unable to handle'

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]

Explanation    The QoS RM dll received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-4-WARN QoSRM-DLL-Warn: [chars]

Explanation    This is a warning message from the QoS RM DLL

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-6-INFO QoSRM-DLL-Info: [chars]

Explanation    This is an informational message from the QoS RM DLL

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS RM dll received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSRM_DLL-7-DEBUG QoSRM-DLL-Debug: [chars]

Explanation    This is a debuging message from the QoS RM DLL

Recommended Action    *NONE*

QOSRM Messages

Error Message    
 
    
    
   

%QOS-QOSRM-3-ERROR QoSRM-Err: [chars]

Explanation    This is an error message from the QoS RM Process, it indicates that something has gone wrong internally in the QoS RM.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]

Explanation    The QoS RM could not create the necessary message channel due to the given error

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM-3-MSG_HANDLER_ERR Event: [chars] occurred in the [chars] message handler, Msg:[hex]

Explanation    An error occurred during message handling in the indicated message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNHANDLED_MSG The QoS RM received an unhandled message

Explanation    The QoS RM received a message that it was unable to handle'

Recommended Action    *DDTS*

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]

Explanation    An incoming message was demuxed to the incorrect message handler

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]

Explanation    The QoS RM received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.

Recommended Action    File a DDTS

Error Message     
 
    
    
   

%QOS-QOSRM-4-WARN QoSRM-Warn: [chars]

Explanation    This is a warning message from the QoS RM Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM-6-INFO QoSRM-Info: [chars]

Explanation    This is an informational message from the QoS RM Process

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%QOS-QOSRM-6-MSG_ASYNC An Asynchronous message was received

Explanation    The QoS RM received an asynchronous message.

Recommended Action    *NONE*

Error Message     
 
    
    
   

%QOS-QOSRM-7-DEBUG QoSRM-Debug: [chars]

Explanation    This is a debuging message from the QoS RM Process

Recommended Action    *NONE*