Cisco IOS XR System Error Message Reference Guide, Release 3.9.1
High Availability (HA) Messages
Downloads: This chapterpdf (PDF - 829.0KB) The complete bookPDF (PDF - 54.82MB) | Feedback

High Availability (HA) Messages

Table Of Contents

High Availability (HA) Messages

CDM_CLI Messages

CDM_MEMMGR_HEAP Messages

CDM_MEMMGR_UTIL Messages

CDM_TDM Messages

CHKPT_BASIC Messages

CHKPT_CLI Messages

CHKPT_HEAP Messages

CHKPT_LIB_COMMS Messages

CHKPT_MESSAGING Messages

CHKPT_PROXY Messages

CHKPT_TDM Messages

DCL_LIB Messages

ENF_BROKER Messages

HA_EEM Messages

HA_SS Messages

HA_WD Messages

HA_WD_LIB Messages

HM Messages

IRM_CHKPT Messages

LRD_inv Messages

LRD Messages

REDCON_CLIENT Messages

REDSTATS Messages

WD_STAT_PUB Messages


High Availability (HA) Messages


This section contains all High Availability related System Error Messages.

CDM_CLI Messages

Error Message    
 
    
    
   

%HA-CDM_CLI-3-MUTEX_COUNT Mutex(0x[pointer]) locked already is being locked again, count equals [dec]

Explanation    A mutex is being locked more than once in the same thread.

Recommended Action    Collect coredump and dll info for the process printing the msg.

Error Message     
 
    
    
   

%HA-CDM_CLI-7-BAD_BUFFER A client library returned an empty buffer: [chars] [chars]

Explanation    --

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CDM_CLI-7-BUFFER_MISMATCH Buffer size mismatch: [dec]: [dec]

Explanation    --

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CDM_CLI-7-INVALID_ARG An invalid argument was passed: [chars]

Explanation    An argument was passed with an invalid value.

Recommended Action    Collect system log information.

CDM_MEMMGR_HEAP Messages

Error Message    
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-BAD_HEAPIDX heap index [hex] (seg [dec] offset [dec] segsize [dec]) cannot be mapped to segment pointer

Explanation    Internally heap pointers are kept as offset indices. A given heap index was found to be outside the heap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-BAD_HEAPPAGE Bad heap page block pointer: [chars]: [pointer]

Explanation    A heap page address is misaligned or lies in some invalid range.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-BAD_HEAPPTR heap pointer cannot be mapped to segment offset: [pointer]

Explanation    Internally heap pointers are kept as offset indices. A given heap pointer was found to be outside the heap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-BAD_NCTDELETE Bad record pointer to free ([char]): [pointer]

Explanation    Bad NCT record is being freed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-CORRUPTION CDM heap corruption was detected ([chars]). Process will be cold restarted.

Explanation    The process crashed during CDM heap modification, resulting in an unrecoverable heap. Process will be started from an empty heap.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-DATA_CORRUPTION Data corruption: [chars]: 0x[dec], 0x[dec], 0x[dec], 0x[dec]

Explanation    Data corruption is detected in CDM data structures. This will generally result in a single process failure.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-MUNMAP unmap and reserve failed: addr [hex] len [dec], [chars]

Explanation    When attempting to free memory that is no longer in use, the CDM library received an error from the kernel.

Recommended Action    Collect system log information and forward to technical support.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-NCT_BIGNEW NCT: requested size too large: [dec]

Explanation    Higher layers of heap are requesting a size for a variable-size record that is too large.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-OBJ_NOT_FOUND Objid [hex] in table [hex] could not be found

Explanation    The object could not be found in the given table when attempting to map the object ID to a memory address.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-PROC_RUNNING CDM segment operation failed: Process [chars] tag [chars] is running on node [chars].

Explanation    A request to move or copy CDM data from one node to another has failed because an instance of the process is running on the destination node.

Recommended Action    Determine why the process is running on the destination node.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-SEGMENT_RENAMED CDM file [chars] has been renamed to [chars] for later analysis due to corruption found during restart.

Explanation    A corrupted CDM segment has been renamed for later analysis.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_HEAP-7-TBL_OBJ_SEG_MISMATCH Tblid [hex] objid [hex] segment mismatch (tbl-seg [dec] obj-seg [dec])

Explanation    When the table ID and object ID are mapped to segment numbers, they do not match. Since an object belongs to a table and therefore resides in the same segment, this indicates a coding error.

Recommended Action    No action is required.

CDM_MEMMGR_UTIL Messages

Error Message    
 
    
    
   

%HA-CDM_MEMMGR_UTIL-3-ASSERT_MSG [chars].[dec]: hit assert condition. 'val1 equals [hex]' expected to be [chars] 'val2 equals [hex]'

Explanation    cdm hit an internal assert.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-COLD_RESTART Process has been restarted without CDM data due to request from sysmgr

Explanation    Due to too many contiguous failed restarts, sysmgr has requested that the process be restarted without CDM data.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-COLD_RESTART_IGNORED Ignoring sysmgr cold restart flag

Explanation    The process has failed to restart multiple times. By design, the process will continue to restart with its existing CDM data.

Recommended Action    Analyze the restart failure and take appropriate recovery action.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-DEBUG_REGISTER Debug register failed ([hex]): [chars]

Explanation    Registration of debug services failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-DUP_KEY [chars]: User key [dec] is in use by object [hex] in table [hex]

Explanation    A client of the CDM library attempted to create an object with a key that was already in use.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-INIT_ERROR initialization error: [chars]: [dec] ([chars])

Explanation    An error was encountered during initialization of the CDM library. The message should indicate the error condition. This is most likely due to a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-NOT_IMPLEMENTED function not implemented yet: [chars]

Explanation    Unimplemented functionality.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-REGISTRATION Error during table registration: [chars]: name: [dec] version: [dec]

Explanation    An error was encountered during table registration. The message should indicate the error condition. This is most likely due to a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-SYSERR OS/System error: [chars]: [dec] ([chars])

Explanation    This message signals an unrecoverable condition reported from the underlying system services. The severity of such errors cannot be determined locally by CDM, so it treats them all such conditions as non-fatal, transient errors. The CDM user must abort its immediate operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CDM_MEMMGR_UTIL-7-WARNING Warning: [chars]: [chars]: [dec]

Explanation    This provides information about non-error conditions which may even be expected under certain circumstances. Nevertheless, these are not considered 'desirable' conditions.

Recommended Action    Collect system log information. No action is required.

CDM_TDM Messages

Error Message    
 
    
    
   

%HA-CDM_TDM-7-BAD_ALIGNMENT Index not aligned: [hex]

Explanation    A heap index was not word aligned.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-COLD_RESTART Cold restart: Reason: [chars]: Application [chars]: table [dec]: version [dec]

Explanation    A process failed to restore state from a table in the CDM store.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-DUP_TABLE Duplicate table found: Application [chars], table [dec]

Explanation    During registration, two copies of a table were found in the CDM store at the same version. This indicates corruption in the CDM store.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-NOT_INDEXED unable to setup index structure for indexed table: [chars]: [hex]: [dec]

Explanation    Errors (most likely lack of memory) prevent CDM from creating an index structure associated with an indexed table. This condition does not affect the functionality at all, only the performance will suffer.

Recommended Action    The CDM software will periodically try again to set up the index structure. So, in general no action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-NO_TRANSLATOR No translator found: [chars]: [chars]: [chars]

Explanation    A required translator was not loaded.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-OBJ_COUNT table object count not correct: [hex]: [dec] (! equals [dec])

Explanation    A table's object count is not what it's supposed to be. This is an internal accounting error and does not cause any problems inside CDM, but it may cause applications which depend on this accounting info to mis-behave.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-OBJ_LEN Bad object length: [chars] tblname: [hex]: object size: [dec] record length: [dec]

Explanation    An object save or get operation is being done with the wrong length buffer. This points to a logical bug in the client application.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-REG_MISMATCH table attributes changed upon re-register: [hex], [hex]

Explanation    An application is trying to register for its table. A table with the same name, version exists, but other attributes have changed, so the table is not allowed to be used.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CDM_TDM-7-TRANSLATION_FATAL Fatal translation error: [hex]

Explanation    An error occurred during data translation. The process will restart without CDM data.

Recommended Action    No action is required.

CHKPT_BASIC Messages

Error Message    
 
    
    
   

%HA-CHKPT_BASIC-7-COLD_RESTART Process has been restarted without checkpoint data due to request from sysmgr

Explanation    Due to too many contiguous failed restarts, sysmgr has requested that the process be restarted without checkpoint data.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-COLD_RESTART_IGNORED Ignoring sysmgr cold restart flag

Explanation    The process has failed to restart multiple times. By design, the process will continue to restart with its existing checkpoint data.

Recommended Action    Analyze the restart failure and take appropriate recovery action.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-DEBUG_REGISTER Debug register failed ([hex]): [chars]

Explanation    Registration of debug services failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-DUP_KEY [chars]: User key [dec] is in use by object [hex] in table [hex]

Explanation    A client of the checkpoint library attempted to create an object with a key that was already in use.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-INCONSISTENT_VERSIONS Inconsistent versioning information: [chars]: native_version: [dec], storage_version: [dec], VS_version: [dec]

Explanation    An invalid combination of version numbers was encountered during table registration or table versioning. This is most likely due to a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-INIT_ERROR initialization error: [chars]: [dec] ([chars])

Explanation    An error was encountered during initialization of the checkpoint library. The message should indicate the error condition. This is most likely due to a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-NOT_IMPLEMENTED function not implemented yet: [chars]

Explanation    Unimplemented functionality.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-REGISTRATION Error during table registration: [chars]: name: [dec] version: [dec]

Explanation    An error was encountered during table registration. The message should indicate the error condition. This is most likely due to a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-SYSERR OS/System error: [chars]: [dec] ([chars])

Explanation    This message signals an unrecoverable condition reported from the underlying system services. The severity of such errors cannot be determined locally by Checkpointing, so it treats them all such conditions as non-fatal, transient errors. The chkpt user must abort its immediate operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_BASIC-7-WARNING Warning: [chars]: [chars]: [dec]

Explanation    This provides information about non-error conditions which may even be expected under certain circumstances. Nevertheless, these are not considered 'desirable' conditions.

Recommended Action    Collect system log information. No action is required.

CHKPT_CLI Messages

Error Message    
 
    
    
   

%HA-CHKPT_CLI-7-BAD_BUFFER A client library returned an empty buffer: [chars] [chars]

Explanation    --

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_CLI-7-BUFFER_MISMATCH Buffer size mismatch: [dec]: [dec]

Explanation    --

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_CLI-7-INVALID_ARG An invalid argument was passed: [chars]

Explanation    An argument was passed with an invalid value.

Recommended Action    Collect system log information.

CHKPT_HEAP Messages

Error Message    
 
    
    
   

%HA-CHKPT_HEAP-7-BAD_HEAPIDX heap index [hex] (seg [dec] offset [dec] segsize [dec]) cannot be mapped to segment pointer

Explanation    Internally heap pointers are kept as offset indices. A given heap index was found to be outside the heap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-BAD_HEAPPAGE Bad heap page block pointer: [chars]: [pointer]

Explanation    A heap page address is misaligned or lies in some invalid range.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-BAD_HEAPPTR heap pointer cannot be mapped to segment offset: [pointer]

Explanation    Internally heap pointers are kept as offset indices. A given heap pointer was found to be outside the heap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-BAD_NCTDELETE Bad record pointer to free ([char]): [pointer]

Explanation    Bad NCT record is being freed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-CORRUPTION Checkpoint heap corruption was detected ([chars]). Process will be cold restarted.

Explanation    The process crashed during checkpoint heap modification, resulting in an unrecoverable heap. Process will be started from an empty heap.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-DATA_CORRUPTION Data corruption: [chars]: 0x[dec], 0x[dec], 0x[dec], 0x[dec]

Explanation    Data corruption is detected in checkpointing data structures. This will generally result in a single process failure.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-MUNMAP unmap and reserve failed: addr [hex] len [dec], [chars]

Explanation    When attempting to free memory that is no longer in use, the checkpoint library received an error from the kernel.

Recommended Action    Collect system log information and forward to technical support.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-NCT_BIGNEW NCT: requested size too large: [dec]

Explanation    Higher layers of heap are requesting a size for a variable-size record that is too large.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-OBJ_NOT_FOUND Objid [hex] in table [hex] could not be found

Explanation    The object could not be found in the given table when attempting to map the object ID to a memory address.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-PROC_RUNNING checkpoint segment operation failed: Process [chars] tag [chars] is running on node [chars].

Explanation    A request to move or copy checkpoint data from one node to another has failed because an instance of the process is running on the destination node.

Recommended Action    Determine why the process is running on the destination node.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-SEGMENT_RENAMED Checkpoint file [chars] has been renamed to [chars] for later analysis due to corruption found during restart.

Explanation    A corrupted checkpoint segment has been renamed for later analysis.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_HEAP-7-TBL_OBJ_SEG_MISMATCH Tblid [hex] objid [hex] segment mismatch (tbl-seg [dec] obj-seg [dec])

Explanation    When the table ID and object ID are mapped to segment numbers, they do not match. Since an object belongs to a table and therefore resides in the same segment, this indicates a coding error.

Recommended Action    No action is required.

CHKPT_LIB_COMMS Messages

Error Message    
 
    
    
   

%HA-CHKPT_LIB_COMMS-3-SYSTEM_ERROR [chars]: [chars] failed with error [hex]

Explanation    A call to a system function failed with the specified error code.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_LIB_COMMS-6-INFO [chars]:[dec]

Explanation    Internal Information messages

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_LIB_COMMS-7-DEBUG [chars]

Explanation    Internal Debug Messages

Recommended Action    No action is required.

CHKPT_MESSAGING Messages

Error Message    
 
    
    
   

%HA-CHKPT_MESSAGING-3-COMMS_INIT_FAIL Chkpt was unable to asynchronously initialise the Replicator Library (error [hex] - [chars]). The client process will be restarted in order to attempt to recover.

Explanation    Library/replicator returned a non-retriable error after the asynchronous retry thread was spawned. There is no way to return an error to the client process, so the library will force an exit to try again. A voluntary core dump should accompany this message to allow further debugging.

Recommended Action    Collect system log information and copy core file for offline analysis. Communications debug (e.g. 'show tech gsp') may also be useful.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-3-IDT_FAILED Checkpoint Initial Data Transfer failed at [chars] with status code [hex]

Explanation    An error occurred during checkpoint Initial Data Transfer which resulted in its failure. A retry of IDT will happen automatically.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BAD_MSGLEN [chars]: message lengths invalid (msglen [dec] srcmsglen [dec] error [hex] ([chars])

Explanation    The source message length is less than the message length. This is a situation which should never happen.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BAD_MSGTYPE [chars]: message type [dec] invalid; error [hex] ([chars])

Explanation    The message type has the checkpoint component ID, but does not have a message type in the correct range. This is a situation which should never happen.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BAD_REQUEST [chars]: Bad request type [dec] msglen [dec]

Explanation    A bad message request was received by the event handler function.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BAD_SEQNO [chars]: request type [dec] had sequence number [dec] (expected [dec])

Explanation    The mirroring request had an incorrect sequence number. This indicates either an algorithm error, or data corruption on the active node or in the data transfer between nodes. Initial Data Transfer will be redone, and no data loss should occur.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BAD_TOTALSIZE [chars]: msg totalsize ([dec]) ! equals srcmsglen ([dec] error [hex] ([chars])

Explanation    The message header total size value must be equal to the source message length. If not, this indicates an IPC or coding error.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-BUFFER_TOO_SMALL Checkpoint library message buffer must be at least [dec] bytes; [dec] bytes is too small for correct operation.

Explanation    The message buffer assigned to the checkpoint library by the application is less than the minimum size for successful messaging functionality. The application should increase the size of its event manager message buffer.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-DUPLICATE_PROCESS [chars]: process name [chars] tag [chars] is already running - this should not happen: aborting

Explanation    An attempt to exclusive-create on a local channel failed. This indicates that there's already a copy of this same process running, and it cannot be allowed to continue, since corruption can result.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-EVENT_MANAGER [chars]: call to [chars] failed with errno [dec]

Explanation    A call to an event manager function failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-GET_MSGLEN [chars]: [chars] failed with error [hex] ([chars])

Explanation    Extracting message or source message length failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-IDT_ALL_FAILED All attempts to do Initial Data Transfer to standby failed (error [hex])

Explanation    Multiple attempts to transfer initial mirrored data to the standby have failed, and the attempts have been stopped.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-LWM_FAILURE [chars]: call to [chars] failed with error [hex] ([chars])

Explanation    A call to a LightWeight Messaging function failed. This may be due to a server being unavailable at the time of the call.

Recommended Action    Collect system log information if it appears that this message is linked with failures in functionality. Otherwise, the message can be ignored.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-MALLOC_FAILED [chars]: malloc of [dec] bytes failed; errno [dec]

Explanation    A call to allocate memory failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-MSG_READ [chars]: msg_read (case [dec]) failed with return [dec]; status [hex] ([chars])

Explanation    A msg_read call in the message handler failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-MSG_REPLY [chars]: msg_reply (reqtype [dec]) failed with errno [dec]

Explanation    A msg_reply call in the message handler failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-MSG_SEND_EVENT [chars]: msg_send_event failed with return [dec]

Explanation    A msg_send_event call in a checkpoint mirroring function failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-NON_CHKPT_MSG [chars]: Non-checkpoint message received: comp-id [dec]

Explanation    A message request for a non-checkpoint component was received by the handler function.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-PTHREAD_FAILURE [chars]: call to [chars] failed with errno [dec]

Explanation    A call to a Posix Pthreads function failed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-REPLICA_NAME Replica name [chars]%s[chars] exceeded the maximum length permitted by Group Services, and has been truncated to [chars]. Replication problems may result if the truncated replica name is non-unique.

Explanation    A replica name passed to the Replicator Library was truncated. This is not an issue in itself, but may cause problems further down the line, if the replica name becomes non-unique within the system.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-STANDBY_OPEN_TIMEOUT Attempts to open standby channel [chars] failed after [dec] retries - continuing

Explanation    Multiple attempts to open the message channel to the standby node (either the application itself or the checkpoint proxy) failed due to either the proxy not running on the standby or the application itself not running on the standby. If the application should run on the standby, then it must call chkpt_init() in order for mirroring to succeed.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-STANDBY_PROXY_SPAWN All attempts to spawn checkpoint proxy on the standby failed (error [hex])

Explanation    Multiple attempts to spawn a copy of the checkpoint proxy for this application on the standby were done, and the attempts have been stopped.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-STBY_CAPABLE Call to sysmgr_is_standby_capable failed with error (error [hex])

Explanation    The call to sysmgr_is_standby_capable failed. This may be due to the application not having a startup file, and so being unknown to sysmgr.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%HA-CHKPT_MESSAGING-7-SYSMGR_GET_PROC_ROLE [chars]: call to sysmgr_get_proc_role failed with status [hex] ([chars])

Explanation    A call to sysmgr_get_proc_role failed with the given status.

Recommended Action    Collect system log information.

CHKPT_PROXY Messages

Error Message    
 
    
    
   

%HA-CHKPT_PROXY-7-BAD_IPC_LENGTH IPC request type [dec] had bad length [dec] (expected [dec])

Explanation    An IPC message with invalid length was received by the proxy process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-BAD_IPC_REQUEST Bad IPC request type [dec] received with message length [dec]

Explanation    An invalid IPC request type was received by the proxy process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-DEBUG [chars]

Explanation    Internal Debug Message

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-GROUP_CREATE_ERROR [chars]: a call to group_create failed with error [dec]

Explanation    The proxy process uses group_create() to join the proxy control group. A call to group_create() failed with the specified error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-IPC_ERROR [chars]: [chars] failed with error [dec]

Explanation    As part of IPC operation, a call to a function failed with the specified error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-NO_MEMORY [chars]: could not allocate [dec] bytes of memory

Explanation    Memory allocation failed. This is likely to be a resource shortage rather than a coding error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-PUTENV [chars]: a call to putenv([chars]) failed with error [dec]

Explanation    The proxy process uses putenv() to communicate with the checkpoint library. A call to putenv() failed with the specified error.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-STDBY_NOPROXY Proxy not spawned for LR-plane process '[chars]' due to admin boot hold

Explanation    Admin boot hold has ben set for this node (normally due to an install operation) so a chkpt_proxy has not been spawned for this process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_PROXY-7-SYSTEM_ERROR [chars]: [chars] failed with error [hex]

Explanation    A call to a system function failed with the specified error code.

Recommended Action    No action is required.

CHKPT_TDM Messages

Error Message    
 
    
    
   

%HA-CHKPT_TDM-4-OOS Checkpoint data on active and standby nodes is out-of-sync: Reason: [chars]: Application [chars]: table [dec]: native version [dec], storage version [dec], VS version [dec]

Explanation    A process failed to restore state from a table in the checkpoint store.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-BAD_ALIGNMENT Index not aligned: [hex]

Explanation    A heap index was not word aligned.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-COLD_RESTART Cold restart: Reason: [chars]: Application [chars]: table [dec]: native version [dec], storage version [dec], VS version [dec]

Explanation    A process failed to restore state from a table in the checkpoint store.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-DUP_TABLE Duplicate table found: Application [chars], table [dec]

Explanation    During registration, two copies of a table were found in the checkpoint store at the same version. This indicates corruption in the checkpoint store.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-NATIVE_VERSION Application passed an invalid native version during a checkpoint table versioning operation. Table: [unsigned int], New version: [dec], Heap version: [dec]

Explanation    While attempting to version a checkpoint table, an application using checkpoint attempted to pass a native version that was inconsistent with the native version recorded in the checkpoint heap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-NOT_INDEXED unable to setup index structure for indexed table: [chars]: [hex]: [dec]

Explanation    Errors (most likely lack of memory) prevent checkpointing from creating an index structure associated with an indexed table. This condition does not affect the functionality at all, only the performance will suffer.

Recommended Action    The checkpointing software will periodically try again to set up the index structure. So, in general no action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-NO_TRANSLATOR No translator found: [chars] : [chars] : [chars]

Explanation    A required translator was not loaded.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-OBJ_COUNT table object count not correct: [hex]: [dec] (! equals [dec])

Explanation    A table's object count is not what it's supposed to be. This is an internal accounting error and does not cause any problems inside checkpointing, but it may cause applications which depend on this accounting info to mis-behave.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-OBJ_LEN Bad object length: [chars] tblname: [hex]: object size: [dec] record length: [dec]

Explanation    An object save or get operation is being done with the wrong length buffer. This points to a logical bug in the client application.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-REG_MISMATCH table attributes changed upon re-registration: name [unsigned int], version [dec], new attributes: [unsigned int],[unsigned int],[unsigned int], existing attributes: [unsigned int],[unsigned int],[unsigned int]

Explanation    An application is trying to register for its table. A table with the same name and version exists, but other attributes have changed, so the table is not allowed to be used.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-CHKPT_TDM-7-TRANSLATION_FATAL Fatal translation error: [hex]

Explanation    An error occurred during data translation. The process will restart without checkpointed data.

Recommended Action    No action is required.

Registration of error strings failed with error [hex]

Explanation    Error string registration failed.

Recommended Action    No action is required.

DCL_LIB Messages

Error Message    
 
    
    
   

%HA-DCL_LIB-2-NULL_PTR --

Explanation    An expected data pointer was not found.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-DCL_LIB-4-CERR_REGISTER Registration of error strings failed with error [hex]

Explanation    Error string registration failed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-DCL_LIB-4-NONFATAL_INTERNAL [chars]@[dec]: A Non-Fatal Internal Error was encountered.

Explanation    A Non-Fatal condition was encountered. This is not necessarily an error, but information gathered here may help with debugging other problems elsewhere in the system.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-DCL_LIB-4-UNEXPECTED [chars]@[dec]: An Unexpected condition was encountered - [chars]

Explanation    An unexpected condition was encountered. This is not necessarily an error, but information gathered here may help with debugging other problems elsewhere in the system.

Recommended Action    Collect system log information. No action is required.

ENF_BROKER Messages

Error Message    
 
    
    
   

%HA-ENF_BROKER-3-INITIALIZATION_FAILURE Failure during initialization. A call to [chars] failed. Error: [chars]

Explanation    The Enf Broker process wasn't able to startup up due the indicated failure during initialization. A restart of the process will be attempted. If the process cannot be successfully started after several attempts, enf service will be unavailable.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-ENF_BROKER-7-CLIENT_CONN_FAILURE Unable to create a client connection object.

Explanation    The Enf Broker process was unable to create a client connection info object for saving the client information (most likely lack of memory). This condition does not impact the functionality, but may result in degradation in performance of this feature.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

HA_EEM Messages

Error Message    
 
    
    
   

%HA-HA_EEM-4-EEMSD_DIRECTORY_NOT_EXIST User policy directory [chars] could not be found on [chars]

Explanation    A policy directory could not be found. Cold start on this location may result in startup configuration failure.

Recommended Action    Create the directory on this location.

Error Message     
 
    
    
   

%HA-HA_EEM-4-EEMSD_POLICY_APPLY Could not apply policy '[chars]': [chars]

Explanation    A policy could not be applied. This message signaled an unsuccessful apply of the policy.

Recommended Action    Remove the configuration for the policy (and commit), and then attempt to configure the registration of the same policy.

Error Message     
 
    
    
   

%HA-HA_EEM-4-EEMSD_POLICY_CONFIG_INCONSISTENT Policy '[chars]': [chars]

Explanation    Some policy configuration is potentially inconsistent, and the user should follow the guidelines in the message to amend this.

Recommended Action    Examine the guidelines in the message, and the event manager configuration, to determine the potential problem. Note that this is just a warning message, not an error message, as the configuration is legal - it may be the case that the user has intentionally set this configuration.

Error Message     
 
    
    
   

%HA-HA_EEM-4-EEMSD_POLICY_NOT_EXIST Policy file [chars] could not be found on [chars]

Explanation    A policy file could not be found. Cold start on this location may result in startup configuration failure.

Recommended Action    Copy the policy file to this location.

Error Message     
 
    
    
   

%HA-HA_EEM-4-EEMSD_POLICY_TUPLE_UNPACK Failed to unpack_tuple to get username (Err: [dec]) for [chars]

Explanation    Failed to unpack sysdb tuple to get the username for the scripts.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. .

Error Message     
 
    
    
   

%HA-HA_EEM-4-EEMSD_POLICY_UNREGREG_ERR Could not replace policy '[chars]': [chars]

Explanation    A registered policy changed by the last installation update was detected. Since the update used the 'start' option, the old policy was automatically replaced by the new policy. This message signaled an unsuccessful replacement of the policy.

Recommended Action    Remove the configuration for the previous policy (and commit), and then attempt to configure the registration of the new policy. The error message returned at commit time should indicate the problem with the new policy.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMED_WD_CPU_NOTIF CPU consumption is [chars] at [unsigned int] percent

Explanation    The CPU state has changed and the new state is announced.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMSD_POLICY_CHANGED Registered policy '[chars]' changed by the last installation update

Explanation    A registered policy was changed by the last installation update. If the update used the 'start' option, the old policy was automatically unregistered and the new policy registered. Otherwise, the old policy would remain registered and functional until the user unregisters it manually.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMSD_POLICY_DELETED Registered policy '[chars]' deleted by the last installation update

Explanation    A registered policy was deleted by the last installation update. If the update used the 'start' option, the policy was automatically unregistered. Otherwise, the policy would remain registered and functional until the user unregisters it manually.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMSD_POLICY_REG_SUCC Policy '[chars]' registered successfully, by user [chars], with persist time [dec] and type [dec]

Explanation    A new policy has been registered with Embedded Event Manager. This message signaled a successful registration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMSD_POLICY_UNREGREG_SUCC Policy '[chars]' replaced successfully

Explanation    A registered policy changed by the last installation update was detected. Since the update used the 'start' option, the old policy was automatically replaced by the new policy. This message signaled a successful replacement of the policy.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMSD_POLICY_UNREG_SUCC Policy '[chars]' unregistered successfully

Explanation    A registered policy changed or deleted by the last installation update was detected. Since the update used the 'start' option, the old policy was automatically unregistered. This message signaled a successful unregistration.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMS_POLICY_EXEC Policy execution has been [chars]

Explanation    The Embedded Event Manager policy execution state has been changed to the state named in the message.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMS_POLICY_TIMEOUT Policy '[chars]' has hit its maximum execution time of [dec].[dec] seconds, and so has been halted

Explanation    The policy has exceeded its maximum execution time, and so has been halted part way through execution. If this policy is expected to take a long time to run, it may need to have 'maxrun_sec' added to the policy registration line (or its value increased if it is already specified).

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMS_RELOAD_SYSTEM Policy has requested a system reload; reloading in 5 seconds

Explanation    A Embedded Event Manager policy requested that the system be reloaded.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%HA-HA_EEM-6-EEMS_SYSLOG_SCAN_SIGNUP Failed to load Syslog FD DLL [chars]: [chars]. Syslog registration in Embedded Event Manager policies will not be able to function.

Explanation    The syslog_scan_signup function reported an error trying to load the specified Syslog Embedded Event Detector DLL library. It will not be possible for Embedded Event Manager to be alerted of new syslog messages, and hence any scripts registered for syslog messages will not be triggered as expected.

Recommended Action    Restart the syslogd process and the eem_server process. If the message still appears then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-DEBUG_INIT_EVENT Debug initialization for the fm/[chars] event failed: [chars]

Explanation    An error was returned when the Embedded Event Manager called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-DEBUG_REGISTER Debug registration for Embedded Event Manager failed: [chars]

Explanation    An error was returned when the Embedded Event Manager called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_CHKPT_INIT [chars]

Explanation    Internal error. The fault detector has failed to initialize with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_CHKPT_TBL_ADD [chars]

Explanation    Internal error. The fault detector has failed to add an object to the checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_CHKPT_TBL_INIT [chars]

Explanation    Internal error. The fault detector has failed to initialize a table with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_CHKPT_TBL_ITERATE [chars]

Explanation    Internal error. The fault detector has failed to iterate the checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_CHKPT_TBL_REMOVE [chars]

Explanation    Internal error. The fault detector has failed to remove an object from the checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_EA_ATTACH Could not register for asynchronous message events: [chars]

Explanation    The fault detector has failed to attach an event handler for asynchronous messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_EI_EVENT Could not initialize event structure: [chars]

Explanation    The fault detector has failed to initialize the sigevent structure to be used by the Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_EM_ATTACH Could not register for synchronous message events: [chars]

Explanation    The fault detector has failed to attach an event handler for synchronous messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_EVM_CREATE Could not create event manager: [chars]

Explanation    The fault detector has failed to create an Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_EVM_EVENT_BLOCK An error occurred while waiting for an event: [chars]

Explanation    The event infrastructure will ignore this error and continue to wait for the next event. If this error is seen repeatedly, the process may not be able to function and will need to be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_MEM_ALLOC Not enough memory ([dec] bytes)

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_MSGSEND_EVT [chars]

Explanation    The fault detector has failed to send a pulse to the fault manager to notify of an event publish.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_MSGSEND_RETRY_ERR Maximum retry number exceeded

Explanation    The fault detector has exceeded its maximum number of retries to send a pulse to the fault manager to notify of an event publish.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_MSG_REPLY Failed to send reply to event manager run: [chars]

Explanation    The fault detector has failed to send a reply to event manager run process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_PUB_ENQUEUE [chars]

Explanation    Internal error. The fault detector has failed to add a publish data entry to the list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_PUB_RBLD [chars]

Explanation    Internal error. The fault detector has failed to rebuild the publish list from the checkpointed records.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_PUB_TM_ALLOC could not allocate memory for event publish timer block

Explanation    Internal error. The fault detector has failed to allocate memory for the event publish timer block.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_RM_ATTACH Could not attach resource manager functions to event manager: [chars]

Explanation    The fault detector has failed to attach a Resource Manager to an Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_TM_ADDL_CTX Could not set additional context pointer: [chars]

Explanation    The fault detector has failed to set a managed timer's additional context pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_TM_LEAF_NEW Could not create a leaf timer

Explanation    The fault detector has failed to create a managed leaf timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_TM_PARENT_NEW Could not create a managed parent timer: [chars]

Explanation    The fault detector has failed to create a managed parent timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-ED_NONE_TM_TREE_NEW Could not create a managed timer tree

Explanation    The fault detector has failed to create a managed timer tree.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_APPL_CBH_PULSE Unable to locate application publish callback entry for pulse code [dec]

Explanation    The application publish callback handler was unable to validate the pulse code received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_APPL_CBH_SEND Unable to report that application publishing has been successfully carried out: [chars]

Explanation    The application publish callback handler was unable to send a report to the Embedded Event Manager Server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_CBS_THREAD_CREATE Unable to create a posix thread: [chars]

Explanation    Unable to create a posix thread to carry out Embedded Event Manager handling.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_CB_EVM_CREATE Unable to create the messaging infrastructure for this process: [chars]

Explanation    An error was reported trying to create the messaging infrastructure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_CB_INIT_EEMC Failed to initialize the Embedded Event Manager context control block: [chars]

Explanation    An error was reported trying to initialize the internal context control block.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_CB_MC_ATTACH Failed to attach to a messaging channel: [chars]

Explanation    An error was reported trying to attach to a messaging channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_CERR_REG Unable to register error code descriptions: [chars]

Explanation    The Embedded Event Manager errors could not be registered, and so the error codes will not be decoded in messages to the user.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_REG_CBH_PULSE Unable to locate reg callback entry for pulse code [dec]

Explanation    The registration callback handler was unable to validate the pulse code received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMC_REG_CBH_SEND Unable to report that callback handling has been successfully carried out: [chars]

Explanation    The registration callback handler was unable to send a report to the Embedded Event Manager Server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_CHKPT_INIT [chars]

Explanation    Internal error. The event detector has failed to initialize with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_CHKPT_TBL_INIT [chars]

Explanation    Internal error. The event detector has failed to initialize a table with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_CHKPT_TBL_ITERATE [chars]

Explanation    Internal error. The event detector has failed to iterate the checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_CONNECTION_FAIL Could not connect to [chars] : [chars]

Explanation    Could not connect to event detector on the remote node. Node may be invalid or not available or the process may not be available to accept the connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_DE_FETCH [chars]

Explanation    Internal error. The event detector has failed to fetch a data element from the statistics data engine.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_DE_INIT [chars]

Explanation    Internal error. The event detector has failed to initialize the statistics data engine.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_EA_ATTACH Could not register for asynchronous message events: [chars]

Explanation    The event detector has failed to attach an event handler for asynchronous messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_EI_EVENT Could not initialize event structure: [chars]

Explanation    The event detector has failed to initialize the sigevent structure to be used by the Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_EM_ATTACH Could not register for synchronous message events: [chars]

Explanation    The event detector has failed to attach an event handler for synchronous messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_EVM_CREATE Could not create event manager: [chars]

Explanation    The event detector has failed to create an Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_EVM_EVENT_BLOCK An error occurred while waiting for an event: [chars]

Explanation    The event infrastructure will ignore this error and continue to wait for the next event. If this error is seen repeatedly, the process may not be able to function and will need to be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_HIST_QERR Could not obtain a free history list entry

Explanation    Internal error. The event detector has failed to get a free history list entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_INV_COMPARE_OP Invalid comparison operator: [dec]

Explanation    Internal error. The value comparison operator is invalid or not supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_INV_STATS_TYPE Invalid statistics value type: [dec]

Explanation    Internal error. The statistics data type is invalid or not supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_INV_TM Invalid timer: type equals [dec], timer equals [pointer]

Explanation    Internal error. The timer value is invalid or not as expected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_INV_TM_TYPE Invalid timer type: [dec]

Explanation    Internal error. The timer type is invalid or not supported.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_LOCAL_NODEID Could not get local nodeid: [chars]

Explanation    Could not get local node identifier.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MEM_ALLOC Not enough memory ([dec] bytes)

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MET_ENQUEUE Could not enqueue metric data: [chars]

Explanation    Internal error. The system manager event detector has failed to add a metric data entry to the list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MET_RBLD [chars]

Explanation    Internal error. The event detector has failed to rebuild the metric list from the checkpointed records.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MISC_ERR [chars] ([chars])

Explanation    An unexpected error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MSGSEND_EVT [chars]

Explanation    The event detector has failed to send a pulse to the event manager to notify of an event publish.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_MSGSEND_RETRY_ERR Maximum retry number exceeded

Explanation    The event detector has exceeded its maximum number of retries to send a pulse to the event manager to notify of an event publish.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_OE_CREATE Could not create an occurrence entry

Explanation    Internal error. The event detector has failed to create an entry for the matched occurrence list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_OE_REMOVE Could not remove an occurrence entry

Explanation    Internal error. The event detector has failed to remove an entry from the matched occurrence list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_PLTF_NODENAME Could not get local node name

Explanation    The event detector has failed to get the local node name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_PUB_ENQUEUE [chars]

Explanation    Internal error. The event detector has failed to add a publish data entry to the list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_PUB_RBLD [chars]

Explanation    Internal error. The event detector has failed to rebuild the publish list from the checkpointed records.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_RM_ATTACH Could not attach resource manager functions to event manager: [chars]

Explanation    The event detector has failed to attach a Resource Manager to an Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_SM_PROC_EXIT [chars]

Explanation    The system manager failed to execute the default action of the terminated process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_STATS_VAL_GET_ERR [chars]

Explanation    Internal error. The event detector has failed retrieving a valid statistics value.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_SYSDB_BIND [chars]

Explanation    Failed to bind to SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_SYSDB_GET [chars]

Explanation    Failed to retrieve an item from SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_SYSDB_REG_NOTIFY [chars]

Explanation    Failed to register for notification of a set of items in SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_THREAD_CREATE Could not create a Posix thread

Explanation    The pthread_create function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_TM_ADDL_CTX Could not set additional context pointer: [chars]

Explanation    The event detector has failed to set a managed timer's additional context pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_TM_CRTICK_INIT [chars]

Explanation    Internal error. The initialization of the cron-tick function has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_TM_LEAF_NEW Could not create a leaf timer

Explanation    The event detector has failed to create a managed leaf timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_TM_PARENT_NEW Could not create a managed parent timer: [chars]

Explanation    The event detector has failed to create a managed parent timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMED_TM_TREE_NEW Could not create a managed timer tree

Explanation    The event detector has failed to create a managed timer tree.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CHKPT_INIT Could not register the application with the checkpointing server: [chars]

Explanation    Failed to register an application with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CHKPT_NULL_PTR --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CHKPT_TBL_ADD Could not save a record into a checkpointing table: [chars]

Explanation    Failed to save a record into the given checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CHKPT_TBL_INIT Failed to initialize [chars]: [chars]

Explanation    Could not initialize a table with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CHKPT_TBL_RECOVER Could not recover the checkpointed [chars]: [chars]

Explanation    Failed to recover a checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_CONN_EXIST The message connection we try to set up already exists

Explanation    An internal error. We tried to set up a message connection but it already exists.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_ASYNC_ATTACH Could not attach handler for Event Manager asynchronous event: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager asynchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_CREATE Could not create event manager: [chars]

Explanation    An internal error was detected when creating Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_EVENT_BLOCK Failed to block waiting for Event Manager events: [chars]

Explanation    An internal error was detected when block waiting for Event Manager events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_FILE_ATTACH Could not register a notification handler for a file descriptor: [chars]

Explanation    An internal error was detected when trying to register a notification handler for a file descriptor.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_INIT_EVENT Could not initialize Event Manager event: [chars]

Explanation    An internal error was detected when initializing an Event Manager event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_TM_ATTACH Could not set up a managed timer identifier: [chars]

Explanation    An internal error was detected when trying to allocate a managed timer identifier and assign to it an event handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_EVM_TM_LEAF_NEW Could not create a managed timer tree leaf: [chars]

Explanation    An internal error was detected when trying to create a managed timer tree leaf for the event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_FD_SIGEVENT Error occurred when a event detector processed the pulse from the metric director: [chars]

Explanation    Internal error. Error occurred when a detector processed the pulse from the metric director.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_FILE_OPEN Failed to open file [chars] : [chars]

Explanation    Failed to open the given file due to some internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_GET_CHID Could not get message channel ID: [chars]

Explanation    An internal error was detected when getting ID for a message channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_GET_NODE_NAME Could not get node name of the local host: [chars]

Explanation    An internal error was detected when trying to get the node name of the local host.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_GUARD_WORD_VER [chars] guard word corrupted; [pointer]

Explanation    The guard word for the specified control block does not contain what is expected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LAST_PROC Invalid last process replied: node [hex], job id [dec]

Explanation    Internal error. The information of last process the metric director replied to 'show event manager metric process' command is invalid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LOCAL_NODEID Could not get local nodeid: [chars]

Explanation    Could not get local node identifier.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LONG_PATHNAME Too long path name

Explanation    Internal error. A path name could not be formed because it exceeded the maximum length.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LWM_ATTACH Could not attach a connection to a message channel: [chars]

Explanation    An internal error was detected when attaching a connection to a message channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LWM_CONNECT Could not connect to the message channel [chars]: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager asynchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LWM_SEND Could not send message: [chars]

Explanation    An internal error was detected when sending a message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_LWM_SEND_ASYNC Could not send a pulse to a connection: [chars]

Explanation    An internal error was detected when trying to send a pulse to a connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_MEM_ALLOC Not enough memory ([dec] bytes)

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_METRICSVC_INIT Could not initialize metric RPC service: [chars]

Explanation    An internal error was detected when initializing RPC service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_METRIC_POLL Error occurred when polling a event detector for metric data: [chars]

Explanation    Internal error. Error occurred when the metric director tried to poll a event detector for metric data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_PROC_EVENT_TYPE Unknown process event type [dec]

Explanation    An unknown Embedded Event process event type was detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_QSM_REG_NOTIF Could not register for QSM notification: [chars]

Explanation    An internal error was detected when registering for QSM notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_SVCEVM_CREATE Could not initialize RPC server for event manager: [chars]

Explanation    Initializing RPC server stub for event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_SVC_REG RPC service registration for Embedded Event Metric Director failed

Explanation    Embedded Event Metric Director failed to register with the RPC facility.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_SYSCALL [chars] failed: [chars]

Explanation    A system call failed with the indicated error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_UNEXP_MSG_TYPE Message type is [dec] instead of the expected [chars]

Explanation    A received message was of an unexpected type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_UNEXP_PROC Process metric entry with node [hex] and job id [dec] not found

Explanation    Internal error. The process metric entry with the given node name and job id cannot be found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMMD_UNEXP_PULSECODE Unexpected pulse code [dec]

Explanation    A received pulse was of an unexpected code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_INIT Could not register the application with the checkpointing server: [chars]

Explanation    Failed to register an application with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_NULL_PTR --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_TBL_ADD Could not save a record into a checkpointing table: [chars]

Explanation    Failed to save a record into the given checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_TBL_INIT Failed to initialize [chars]: [chars]

Explanation    Could not initialize a table with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_TBL_RECOVER Could not recover the checkpointed [chars]: [chars]

Explanation    Failed to recover a checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_TBL_REMOVE Could not delete a record from a checkpointing table: [chars]

Explanation    Failed to delete a record from the given checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_CHKPT_TBL_RESET Could not reset a record in a checkpointing table: [chars]

Explanation    Failed to reset a record in the given checkpointing table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_COUNTER_SET Failed to set a counter: [chars]

Explanation    Failed to set a Embedded Event Manager counter.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_EVENT_CREATE Failed to create an event: [chars]

Explanation    Failed to create a Embedded Event Manager event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_EVENT_REG Failed to register an event: [chars]

Explanation    Failed to register a Embedded Event Manager event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_EVENT_TYPE Unknown event type [dec]

Explanation    An unknown Embedded Event Manager event type was detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_EVM_CREATE Could not create event manager: [chars]

Explanation    An internal error was detected when creating Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_EVM_EVENT_BLOCK Failed to block waiting for Event Manager events: [chars]

Explanation    An internal error was detected when block waiting for Event Manager events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_FILE_OPEN Failed to open file '[chars]': [chars]

Explanation    Failed to open the given file due to some internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_FM_INIT Could not initialize Embedded Event Manager service '[chars]': [chars]

Explanation    An internal error was detected when initializing Embedded Event Manager service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_GET_NODE_NAME Failed to get the local node name: [chars]

Explanation    Failed to get the local node name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_GET_PRIO Failed to get process priority: [chars]

Explanation    Internal error. A call to get process scheduling priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_LAST_POLICY Invalid last policy name replied '[chars]'

Explanation    Internal error. The last policy name the script director replied to 'show event manager policy registered' command is an invalid policy name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_MEM_ALLOC Not enough memory ([dec] bytes)

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_OVL_NOTIF_REG Could not register for Version Manager notification: [chars]

Explanation    An internal error was detected when registering for Version Manager notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_OVL_SETUP_ENV Could not update environment variables: [chars]

Explanation    Updating environment variables of the process according to system variables stored in sysdb failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_POLICY_MISSING The policy execution copy '[chars]' was not present at unregistration.

Explanation    The execution copy of the indication policy was not found at the time of unregistration. Most likely, the policy was removed manually, or the policy was not synced to the standby prior to failover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_POLICY_UNREG_ERR Could not unregister policy '[chars]': [chars]

Explanation    A registered policy changed or deleted by the last installation update was detected. Since the update used the 'start' option, the old policy was automatically unregistered. This message signaled an unsuccessful unregistration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_REFRESHTIMER_INIT Failed to initialize a refresh timer ([chars]): [chars]

Explanation    Failed to initialize a Embedded Event Manager refresh timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_RESYNC_FAIL Could not re-add file [chars] to syncfs list: [chars]

Explanation    On process restart or failover the script file could not be added to the syncfs list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_SVCEVM_CREATE Could not initialize RPC server for event manager: [chars]

Explanation    Initializing RPC server stub for event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_SVC_REG RPC service registration for Embedded Event Manager Script Director failed

Explanation    Embedded Event Manager Script Director failed to register with the RPC facility.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_SYNCLIST_FAIL Failed to remove '[chars]' from the sync list: [chars].

Explanation    An error was encountered while removing the indicated execution copy of a policy from the syncfs sync list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_SYNC_FAIL Could not add file [chars] to syncfs list: [chars]

Explanation    Failed to add a file to be backed up on the redundant node.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_SYSDB_VERIFY_REG Could not register for SysDB verification: [chars]

Explanation    An internal error was detected when trying to register verify function and/or apply function for SysDB tuple operations upon the given item within the given name space.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMSD_TIMER_ARM Failed to arm a timer: [chars]

Explanation    Failed to arm a Embedded Event Manager timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_ASYNC_ATTACH Failed to attach to handle [chars]: [chars]

Explanation    The event_async_attach function reported an error trying to attach to the specified handle.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_ASYNC_ATTACH_FD Failed to attach to handle Embedded Event Detector [chars] pulse code: [chars]

Explanation    The event_async_attach function reported an error trying to attach to handle the Embedded Event Detector handler pulse code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CALLBACK_MAX_ENTRIES Maximum number of callback publish entries exceeded for [chars]; some events have been discarded

Explanation    An attempt to publish an event requiring a callback failed because there is no more room in the callback publish queue for the specified process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_INIT Could not register the application with the checkpointing server: [chars]

Explanation    Failed to register an application with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_NULL_PTR --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_TBL_ADD Could not add to the checkpointed [chars]: [chars]

Explanation    Failed to add a record to the checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_TBL_INIT Failed to initialize [chars]: [chars]

Explanation    Could not initialize a table with the checkpointing server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_TBL_RECOVER Could not recover for the checkpointed [chars]: [chars]

Explanation    Failed to recover a record from the checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_TBL_REMOVE Could not remove from the checkpointed [chars]: [chars]

Explanation    Failed to remove a record from a checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_CHKPT_TBL_SAVE Could not save to the checkpointed [chars]: [chars]

Explanation    Failed to save a record to a checkpointed table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_EVM_CREATE Failed to create an event manager: [chars]

Explanation    An error was reported trying to create this process' messaging infrastructure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_EVM_EVENT_BLOCK An error occurred while waiting for an event: [chars]

Explanation    The event infrastructure will ignore this error and continue to wait for the next event. If this error is seen repeatedly, the process may not be able to function and will need to be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_EVM_FILE_ATTACH Unable to do an event_file_attach for [chars]: [chars]

Explanation    The event_file_attach function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_EVM_INIT_EVENT event_init_event for Embedded Event Detector [chars] failed: [chars]

Explanation    The event_init_event function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_FDC_ALLOCATE Failed to allocate Embedded Event Detector context control block: [chars]

Explanation    The get_fd function reported an error trying to allocate a Embedded Event Detector context control block.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_FDC_OPEN Failed to open Embedded Event Detector context control block

Explanation    The open_fd function reported an error trying to open a Embedded Event Detector context control block.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_GET_CHAN_CHAN Failed to obtain a messaging channel ID: [chars]

Explanation    An error was reported trying to obtain the channel ID.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_GET_NODE_NAME Failed to retrieve the name of the local node: [chars]

Explanation    An error was reported trying to obtain the node name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_GET_NODE_STATE Failed to get the current nodes state: [chars]

Explanation    The call to get the nodes current state failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_GET_PRIO Failed to get process priority: [chars]

Explanation    The getprio function reported an error trying to obtain the default process priority.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_GUARD_WORD_VER [chars] guard word corrupted; [pointer]

Explanation    The guard word for the specified control block does not contain what is expected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_INIT_EVENT_TIMER Failed to initialize a timer event: [chars]

Explanation    An error was reported trying to initialize the timer notification event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_INV_ARG_STRING Invalid argument string: [chars]

Explanation    An invalid argument string was passed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_INV_ENV_STRING Invalid environment string: [chars]

Explanation    An invalid environment string was passed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_KILL Unable to kill process [chars]: [chars]

Explanation    The kill function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_KILL_RUN Unable to kill run process [dec] for [chars]: [chars]

Explanation    The kill function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_ATTACH Failed to attach to eem message channel: [chars]

Explanation    The msg_chan_attach function reported an error trying to attach to the Embedded Event Manager server channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_ATTACH_SYNC Failed to attach to handle synchronous messages: [chars]

Explanation    The event_message_attach function reported an error trying to attach to handle synchronous messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_CONNECT Failed to connect to eem message channel [chars]: [chars]

Explanation    The msg_chan_connect function reported an error trying to connect to the specified Embedded Event Manager server channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_DISCONNECT Failed to disconnect from eem message channel [chars]: [chars]

Explanation    The msg_chan_disconnect function reported an error trying to disconnect from the specified Embedded Event Manager server channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_SEND Failed to send a message to [chars]: [chars]

Explanation    The msg_send function reported an error trying to send a message to the specified process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_SEND_ASYNC Could not send a pulse to a connection: [chars]

Explanation    An internal error was detected when trying to send a pulse to a connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_LWM_SEND_EVENT Failed to send an event to [chars]: [chars]

Explanation    The msg_send_event function reported an error trying to send an asynchronous message to the specified process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_MEM_ALLOC Unable to allocate [dec] bytes

Explanation    The malloc function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_MEM_REALLOC Unable to reallocate [dec] bytes

Explanation    The reallocation function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_MISC_ERR [chars] ([chars])

Explanation    An unexpected error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_NULL_SCRIPT_NAME --

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_OPEN Unable to open [chars]: [chars]

Explanation    The open function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_OVL_GET_MODULE_PATH ovl_get_module_path failed when attempting to get the full path for a program: [chars]

Explanation    The ovl_get_module_path function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_OVL_NOTIFY_REG ovl_notification_register failed when registering to handle OVL notifications: [chars]

Explanation    The ovl_register_notification function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_OVL_SETUP_ENV ovl_setup_env failed when updating the environment variables during an OVL notification: [chars]

Explanation    The ovl_setup_env function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_POLICY_CHECKSUM Checksum error for policy [chars] - this policy will not be run

Explanation    The checksum computed for the specified policy does not match the original checksum computed when the policy was registered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_POLICY_HASH The hash computation routine reported an error: [chars]

Explanation    The fm_hash_md5_fd() function reported the specified error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_QSM_REGISTER Failed to register for QSM notifications for the event detector [chars]: [chars]

Explanation    The qsm_register_notification function reported an error trying to register for QSM notifications for the named event detector.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_REG_NODE_STATE_CHANGE Failed to register for node state changes: [chars]

Explanation    The call to register for node state changes failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_SCRIPT_MAX_ENTRIES Maximum number of script publish entries exceeded; some events have been discarded

Explanation    An attempt to publish an event requiring a script failed because there is no more room in the script publish queue.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_SIGNAL_ATTACH Failed to attach to handle SIGCHLD: [chars]

Explanation    The event_signal_attach function reported an error trying to attach to handle the SIGCHLD signal.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_SIGQUEUE Failed to queue a signal for pid [hex], signal [dec]: [chars]

Explanation    The sigqueue function reported an error trying to send a notification signal to the process specified by pid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_SPAWN Unable to spawn [chars]: [chars]

Explanation    The spawn function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_SYSLOG_SCAN_RESIGN Failed to unload Syslog FD DLL [chars]: [chars]

Explanation    The syslog_scan_resign function reported an error trying to unload the specified Syslog Embedded Event Detector DLL library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_TM_LEAF_NEW Unable to create timer leaf for [chars]: [chars]

Explanation    The mgd_timer_leaf_new function reported an error attempting to create a timer leaf for the timer named in the error message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_TM_PARENT_NEW Could not create a managed parent timer: [chars]

Explanation    The mgd_timer_parent_new function reported an error attempting to create the timer named in the error message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_EEM-7-EEMS_TM_TREE_NEW Could not create a managed timer tree

Explanation    The mgd_timer_tree_new function reported an error attempting to create the root timer tree.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HA_SS Messages

Error Message    
 
    
    
   

%HA-HA_SS-7-DEBUG MSG1[[chars]] ID[[dec]] MSG2[[chars]]

Explanation    Debug message

Recommended Action    No action is required.

HA_WD Messages

Error Message    
 
    
    
   

%HA-HA_WD-1-ABORTING [chars], Aborting.

Explanation    The system is experiencing CPU Hog, If this condition persists for 30 seconds, the node will be reloaded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-1-CPU_HOG_5 Process [chars] pid [dec] tid [dec] prio [dec] using [dec]% is hogging CPU and will be terminated

Explanation    This message is displayed

Recommended Action    The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistent, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-1-CPU_HOG_ALERT Process [chars] pid [dec] tid [dec] prio [dec] using [dec]% is the top user of CPU.

Explanation    This message is displayed after the CPU hog detector trips. It shows the percentage of CPU used by the busiest thread in the top consumer of CPU.

Recommended Action    The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistent, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-1-CURRENT_STATE Persistent Hog detected for more than [dec] seconds

Explanation    The system is experiencing CPU Hog, If this condition persists for 30 seconds, the node will be reloaded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-1-DISK_ALERT A monitored device [chars] is above [dec]% utilization. Current utilization equals [dec]. Please remove unwanted user files and configuration rollback points.

Explanation    When some monitored disk's usage is above 99%.

Recommended Action    The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.

Error Message     
 
    
    
   

%HA-HA_WD-2-DISK_CRIT A monitored device [chars] is above [dec]% utilization. Current utilization equals [dec]. Please remove unwanted user files and configuration rollback points.

Explanation    When some monitored disk's usage is above 95%.

Recommended Action    The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.

Error Message     
 
    
    
   

%HA-HA_WD-3-DEBUG_REGISTER_FAIL Call to debug_register() failed with error [dec] ([chars])

Explanation    An internal error was detected when registering with the debug library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-DEVCTL [chars]: line [dec]: devctl() on file [chars] failed with error [dec] ([chars])

Explanation    Failed to open procfs file or directory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_ASYNC_ATTACH [chars]: could not attach handler for Event Manager asynchronous event: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager asynchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_CREATE [chars]: could not create event manager: [chars]

Explanation    An internal error was detected when creating Event Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_EVENT_BLOCK [chars]: failed to block waiting for Event Manager events: [chars]

Explanation    An internal error was detected when block waiting for Event Manager events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_INIT_EVENT [chars]: failed to initialize a sigevent structure: [chars]

Explanation    An internal error was detected when trying to initialize a sigevent structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_MSG_ATTACH [chars]: could not attach handler for Event Manager synchronous message: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager synchronous message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_THREAD_INIT [chars]: unable to initialize event manager thread: [chars]

Explanation    An error occurred when attempting to initialize the event manager thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_TM_ATTACH [chars]: could not set up a managed timer identifier: [chars]

Explanation    An internal error was detected when trying to allocate a managed timer identifier and assign to it an event handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_TM_DETACH [chars]: could not set up a managed timer identifier: [chars]

Explanation    An internal error was detected when trying to remove a managed timer registration from an event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-EVM_TM_LEAF_NEW [chars]: could not create a managed timer tree leaf: [chars]

Explanation    An internal error was detected when trying to create a managed timer tree leaf for the event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-FD_CRIT_LIM Process [chars], pid [dec] is using [dec] file descriptors out of a max of [dec]. Critical limit ([dec]%) crossed.

Explanation    A process is potentially leaking FDs. Critical limit has been crossed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-FD_INIT [chars]: failed to initialize fault detector: [chars]

Explanation    An internal error was detected when initializing the fault detector.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-FREE_MEM_ADDR Unable to get address of free memory variable from kernel.

Explanation    Wdsysmon was not able to get access to free memory information from kernel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-HELPER_INIT_FAIL Failed to init helper lib. [chars]: [chars]

Explanation    The system failed to initialize helper library. This is a fatal error for wdsysmon.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-MSG_GET_CHAN_CHAN [chars]: could not get channel id from the channel handler: [chars]

Explanation    An internal error was detected when trying to get channel id from a channel handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-NOTIF_THREAD_INIT [chars]: unable to initialize process memory notification thread: [chars]

Explanation    An error occurred when attempting to initialize the event manager thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-OPEN_PROCFS [chars]: could not open procfs file or directory [chars]: [chars]

Explanation    Failed to open procfs file or directory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-PLATFORM_NODENAME [chars]: could not get local node name: [chars]

Explanation    An internal error was detected when trying to get local node name through platform library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-PLATFORM_SLOT [chars]: could not get my slot number

Explanation    An internal error was detected when trying to get the slot number of local node through platform library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-POP [chars]: unmatched stack pop operation

Explanation    An unmatched stack pop operation was detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-PTHRD_CREATE [chars]: could not create a POSIX thread

Explanation    An internal error was detected when trying to create a POSIX thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-SERVICE_CREATE Failed to create thread for service [dec], name [chars]: [chars]

Explanation    The system failed to create the thread that provides the indicated service. This is a fatal error for wdsysmon.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-3-WATCHER_THREAD_INIT [chars]: unable to initialize process cpu watcher thread: [chars]

Explanation    An error occurred when attempting to initialize the cpu watcher thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-4-CFG_FAILED [chars]: wd_config_init failed, error: [chars]

Explanation    wd_config_init failed due to sysdb initialization problem.

Recommended Action    Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-4-DISK_ALARM [chars] [chars]

Explanation    Set: When some monitored disk's usage is above 80%. Cleared: When all monitored disks' usage are below 80%.

Recommended Action    The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.

Error Message     
 
    
    
   

%HA-HA_WD-4-DISK_WARN A monitored device [chars] is above [dec]% utilization. Current utilization equals [dec]. Please remove unwanted user files and configuration rollback points.

Explanation    When some monitored disk's usage is above 80%.

Recommended Action    The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.

Error Message     
 
    
    
   

%HA-HA_WD-4-DSC_REG_FAILED [chars]: Failed to register for DSC event with sysmgr, error: [chars]

Explanation    sysmgr_register_lr_event failed to register for DSC notification event

Recommended Action    Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-4-FD_MAJ_LIM Process [chars], pid [dec] is using [dec] file descriptors out of a max of [dec]. Major limit ([dec]%) crossed.

Explanation    A process is potentially leaking FDs. Major limit has been crossed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-4-FD_MIN_LIM Process [chars], pid [dec] is using [dec] file descriptors out of a max of [dec]. Minor Limit ([dec]%) crossed.

Explanation    A process is potentially leaking FDs. Minor limit has been crossed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-4-FD_NORMAL_LIM Process [chars], pid [dec], is now using [dec] file descriptors. Status is Normal

Explanation    --

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-4-MEMORY_ALARM Memory threshold crossed: [chars] with [unsigned int].[unsigned int]MB free

Explanation    Set: Free memory on this node is below the reported threshold. Clear: Free memory is above the MINOR threshold. In both cases, the amount of free memory in megabytes is reported.

Recommended Action    Investigate memory usage on this node. It may be necessary to unconfigure some applications or move them to a different node. In the case of memory leaks, technical support may need to be contacted.

Error Message     
 
    
    
   

%HA-HA_WD-4-MEMORY_LIMIT_EXCEEDED Process [chars][[dec]] (pid [dec]) has exceeded its memory limit:[dec] kbytes of heap allowed, [dec] kbytes of heap used. (Info:[dec] kbytes of virtual shared memory used).

Explanation    The process with the indicated name and pid has allocated more memory than its memory limit allows. The process will be restarted.

Recommended Action    The system will collect data about the process before it is killed. Collect this data and forward it to technical support. Most likely, there is a memory leak in the process.

Error Message     
 
    
    
   

%HA-HA_WD-4-MEMORY_STATE_CHANGE New memory state: [chars]

Explanation    The free memory state of this node has changed to the indicated state.

Recommended Action    If the free memory state is Severe or Critical, investigate memory usage on this node. It may be necessary to unconfigure some applications or move them to a different node. In the case of memory leaks, technical support may need to be contacted.

Error Message     
 
    
    
   

%HA-HA_WD-4-MEM_POLL [chars]: Failed to poll for memory usage: [chars]

Explanation    An error was encountered during wdsysmon's poll for system memory usage.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-4-TOP_MEMORY_USERS_WARNING Top [dec] consumers of system memory ([dec] Kbytes free):

Explanation    This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top memory users will follow in the next messages. There may be a memory leak or misconfiguration.

Recommended Action    Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-4-TOP_MEMORY_USER_WARNING [dec]: Process Name: [chars][[dec]], pid: [dec][chars], Heap usage [dec] Kbytes, Virtual Shared memory usage: [dec] Kbytes.

Explanation    This process is one of the top memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.

Recommended Action    Collect system log information. Contact technical support if the problem is not a misconfiguration.

Error Message     
 
    
    
   

%HA-HA_WD-4-TOP_SHMEM_USERS_WARNING Top [dec] consumers of shared memory ([dec] Kbytes free):

Explanation    This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top shared memory users will follow in the next messages. There may be a memory leak or misconfiguration.

Recommended Action    Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-4-TOP_SHMEM_USER_WARNING [dec]: File/Directory Name: [chars], Kbytes used: [dec].

Explanation    This process is one of the top shared memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.

Recommended Action    Collect system log information. Contact technical support if the problem is not a misconfiguration.

Error Message     
 
    
    
   

%HA-HA_WD-5-NO_TIMEOUT All registered event managers on this node are sending heartbeats.

Explanation    All event managers are now sending keep alive messages as expected.

Recommended Action    The debugging information collected when an event manager stopped sending heartbeats should be examined and provided to technical support for analysis.

Error Message     
 
    
    
   

%HA-HA_WD-5-TIMEOUT Event manager from process [chars][[dec]] created by thread [dec] at [chars] is not sending heartbeats.

Explanation    A timeout occurred waiting to hear from an event manager. This could happen as a result of a process being deadlocked on another event.

Recommended Action    Wdsysmon has detected that an event manager is no longer sending keepalive heartbeats. The message provides information about where the event manager was created. A debug script will run and collect information about the process and the state of the router. The output will be in a directory [/disk1:|/disk0:|/bootflash:|/tmp]/wdsysmon_debug/debug.*

Error Message     
 
    
    
   

%HA-HA_WD-5-TIMEOUT_CANCELLED Event manager from process [chars][[dec]] created by thread [dec] at [chars] is not sending heartbeats.

Explanation    An event manager has resumed sending heartbeats. This happens when a condition that caused the hang is cleared.

Recommended Action    The debugging information collected when the event manager stopped sending heartbeats should be examined and provided to technical support for analysis.

Error Message     
 
    
    
   

%HA-HA_WD-5-TIMEOUT_EXIT Process [chars] with event manager not sending heartbeats has exited.

Explanation    A process with an event manager that was not sending heartbeats has exited.

Recommended Action    The debugging information collected when the event manager stopped sending heartbeats should be examined and provided to technical support for analysis.

Error Message     
 
    
    
   

%HA-HA_WD-6-CPU_HOG_1 CPU hog: cpu [dec]'s sched count is [dec].

Explanation    Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop. The sched count is the number of times the wdsysmon ticker thread has been scheduled since the last time the wdsysmon watcher thread ran.

Recommended Action    Check the system status, including the saved log for evidence of a high priority cpu hog.

Error Message     
 
    
    
   

%HA-HA_WD-6-CPU_HOG_2 CPU hog: cpu [dec]'s ticker last ran [dec].[dec] seconds ago.

Explanation    Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop.

Recommended Action    Check the system status, including the saved log for evidence of a high priority cpu hog.

Error Message     
 
    
    
   

%HA-HA_WD-6-CPU_HOG_3 Rolling average of scheduling times: [dec].[dec].

Explanation    Wdsysmon has detected a cpu starvation situation - potentially a high priority process spinning in a tight loop. A high value for the rolling average indicates that a periodic process is not being scheduled.

Recommended Action    Check the system status, including the saved log for evidence of a high priority cpu hog.

Error Message     
 
    
    
   

%HA-HA_WD-6-CPU_HOG_4 Process [chars] pid [dec] tid [dec] prio [dec] using [dec]% is the top user of CPU.

Explanation    This message is displayed after the CPU hog detector trips. It shows the percentage of CPU used by the busiest thread in the top consumer of CPU.

Recommended Action    The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistent, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-6-DISK_NORMAL Device [chars] usage [dec].

Explanation    When all monitored disks' usage are below 80%.

Recommended Action    The indicated disk device may be running out of space. Determine if there are unneeded files on the disk.

Error Message     
 
    
    
   

%HA-HA_WD-6-DISK_UNMONITOR Alarmed disk [chars] is no longer monitored

Explanation    Wdsysmon has been told to stop monitoring the indicated device, even though the disk is above 90% utilization.

Recommended Action    If the disk is used for critical tasks, monitor the disk usage and take corrective action.

Error Message     
 
    
    
   

%HA-HA_WD-6-GI_FILES_CREATED New dump files created in [chars]

Explanation    Information captured by various modules and stored in bootflash during a previous reset has been moved to hard disk.

Recommended Action    Examine the dump information for possible root-cause for a previous reset. Use the wd_test utility.

Error Message     
 
    
    
   

%HA-HA_WD-6-IN_DEP_LIST Process [chars] pid [dec] is present in Dependency List and will not be killed.

Explanation    This message is emitted if the misbehaving process is one that wdsysmon depends on. It will not be terminated.

Recommended Action    The command 'show watchdog trace' will display additional information about the process. Forward this information to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-6-KNOWN_HOG Top CPU user process [chars] pid [dec] is a known hog.

Explanation    This message is emitted if the top CPU user is known to use substantial CPU under some circumstances.

Recommended Action    The command 'show watchdog trace' will display additional information about the potential CPU hog. If the hog is persistent, contact technical support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-6-MEMORY_RECOVERY_DISABLED Node physical memory 256MB

Explanation    This node is not configured with sufficient memory to enable memory recovery support.

Recommended Action    Re-configure this node with more physical memory

Error Message     
 
    
    
   

%HA-HA_WD-6-MEMORY_RECOVERY_KILL_NON_SYSMGR Process [chars] (pid [dec]) not managed by sysmgr using [dec] kbytes of heap memory will be killed and not restarted.(Info:[dec] kbytes of virtual shared memory).

Explanation    The process with the indicated name and pid has been killed in an attempt to recover system memory. Since this process is not managed by sysmgr, it may not be restarted. The process can be manually restarted if desired, but may continue to consume large amounts of memory.

Recommended Action    The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.

Error Message     
 
    
    
   

%HA-HA_WD-6-MEMORY_RECOVERY_KILL_SYSMGR Process [chars][[dec]] (pid [dec]) (managed by sysmgr) using [dec] kbytes of heap memory will be killed and not restarted.(Info:[dec] kbytes of virtual shared memory).

Explanation    The sysmgr process with the indicated name and pid has been killed in an attempt to recover system memory. The process can be manually restarted if desired, but may continue to consume large amounts of memory.

Recommended Action    The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.

Error Message     
 
    
    
   

%HA-HA_WD-6-MEMORY_RECOVERY_RESTART Process [chars][[dec]] (pid [dec]) using [dec] kbytes of heap memory will be restarted. (Info:[dec] kbytes of virtual shared memory).

Explanation    The sysmgr process with the indicated name and pid has been restarted in an attempt to recover system memory.

Recommended Action    The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.

Error Message     
 
    
    
   

%HA-HA_WD-6-PROC_KILL_DISABLED [chars]: Process-terminate disabled. Pid [dec] will not be terminated

Explanation    wdsysmon process-termination is disabled. A process which meets the kill criteria (either because it's in deadlock, or it's a memory or CPU hog - indicated by the first parameter [%d]) will not be terminated.

Recommended Action    Collect all logs, especially those from wdsysmon. Also collect output from 'show watchdog trace'. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-6-TOP_MEMORY_USERS_INFO Top [dec] consumers of system memory ([dec] Kbytes free):

Explanation    This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top memory users will follow in the next messages. There may be a memory leak or misconfiguration.

Recommended Action    Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-6-TOP_MEMORY_USER_INFO [dec]: Process Name: [chars][[dec]], pid: [dec][chars], Heap usage: [dec] kbytes, Virtual Shared memory usage: [dec] kbytes.

Explanation    This process is one of the top memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.

Recommended Action    Collect system log information. Contact technical support if the problem is not a misconfiguration.

Error Message     
 
    
    
   

%HA-HA_WD-6-TOP_SHMEM_USERS_INFO Top [dec] consumers of shared memory ([dec] Kbytes free):

Explanation    This message is emitted when system memory usage crosses a threshold in the direction of increasing memory exhaustion. The top shared memory users will follow in the next messages. There may be a memory leak or misconfiguration.

Recommended Action    Collect the data from the following messages and attempt to determine what is driving memory usage. Forward the messages to technical support.

Error Message     
 
    
    
   

%HA-HA_WD-6-TOP_SHMEM_USER_INFO [dec]: File/Directory Name: [chars], Kbytes used: [dec].

Explanation    This process is one of the top shared memory users in the system. If the system reaches critical memory exhaustion, this process is subject to restart or termination. If the process is listed as 'Killed', then the system is in the process of recovering the resources used by the process.

Recommended Action    Collect system log information. Contact technical support if the problem is not a misconfiguration.

Error Message     
 
    
    
   

%HA-HA_WD-7-CISCOSHMEM [chars]: [chars]

Explanation    Mapping to shared memory provided by cisco_wrapper failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-CLINFO_GET_DATUM [chars]: could not get an application datum associated with the channel: [chars]

Explanation    An internal error was detected when trying to retrieve an application datum associated with the given channel handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-CLINFO_M_PID [chars]: could not get process id from message information: [chars]

Explanation    An internal error was detected when trying to get process id from the information of a message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-CLINFO_SAVE_DATUM [chars]: could not save an application datum associated with the channel: [chars]

Explanation    An internal error was detected when trying to save an application datum associated with the given channel handler.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-CLINFO_UNHOLD [chars]: could not decrement the hold count of the client info data: [chars]

Explanation    An internal error was detected when trying to decrement the hold count of the client info data of a synchronous message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-CONTEXT_CREATE [chars]: Failed to create notification context: [chars]

Explanation    During registration for memory notification, an internal error prevented the creation of an internal context structure. The calling function and detected error are displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-GET_EVM_CTX_BY_TIMER [chars]: could not find the event manager context by timeout timer [pointer]

Explanation    An internal error was detected when trying to find the event manager context by the given timeout timer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-MSG_CHAN_CONNECT [chars]: could not connect to the message channel [chars]: [chars]

Explanation    An internal error was detected when attaching a handler for an Event Manager asynchronous event.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-MSG_CHAN_DISCONN [chars]: could not disconnect a message channel: [chars]

Explanation    An internal error was detected when trying to disconnect a message channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-MSG_SEND [chars]: could not send the message: [chars]

Explanation    An internal error was detected when trying to send a message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-MSG_SEND_EVENT [chars]: could not send the sigevent: [chars]

Explanation    An internal error was detected when trying to send a sigevent to the client that last sent a message on the connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-MSG_TYPE [chars]: unknown message type [dec]

Explanation    A message with an unknown type was received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-NO_MEM [chars]: not enough memory: [chars]

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_WD-7-SCHED_GET_PRIORITY_MAX [chars]: The sched_get_priority_max() function returned an error; [chars]

Explanation    The sched_get_priority_max() function returned an error which is indicated in the message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-SCHED_SETSCHEDULER [chars]: The sched_setscheduler() function returned an error; [chars]

Explanation    The sched_setscheduler() function returned an error which is indicated in the message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-SYSCALL [chars]: [chars](): [chars]

Explanation    A system call failed. The calling function, the failed call, and error are displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD-7-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

HA_WD_LIB Messages

Error Message    
 
    
    
   

%HA-HA_WD_LIB-3-DEBUG_REGISTER_FAIL Call to debug_register() failed with error [dec] ([chars])

Explanation    An internal error was detected when registering with the debug library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-CLIENT_MONITOR Call to remonitor evm failed: [chars]

Explanation    The wdsysmon server returned an error to a client in response to a request to remonitor an event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-CLIENT_UNMONITOR Call to monitor evm failed: [chars]

Explanation    The wdsysmon server returned an error to a client in response to a request to stop monitoring an event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-INVALID_ARG [chars]: [chars]

Explanation    A wdsysmon library was called with an invalid argument.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-MISSING_CTX [chars]: [unsigned int]

Explanation    During a re-registration, an internal context structure was not found. This is probably a coding error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-NO_MEM [chars]: not enough memory: [chars]

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-SVR_MEMINFO [chars]: Server failed to return memory information: [chars]

Explanation    An internal error was detected when trying to communicate with wdsysmon to retrieve a node's memory information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-SVR_REG [chars]: failed to register with WDSysMon server: [chars]

Explanation    An internal error was detected when trying to register with WDSysMon server with an initialization message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-SVR_RSC_UNREG [chars]:[chars]: failed to unregister with wdsysmon resource notification server: [chars]

Explanation    An internal error was detected when trying to unregister with wdSysmon server

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-SVR_UNREG [chars]: failed to unregister with WDSysMon server: [chars]

Explanation    An internal error was detected when trying to unregister with WDSysMon server with a close message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-SYSCALL [chars]: [chars](): [chars]

Explanation    A system call failed in the wdsysmon library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HA_WD_LIB-7-THREAD_CTX_INIT [chars]:[chars]: failed to initialize WDSysMon resource notification thread context: [chars]

Explanation    An internal error was detected when trying to initialize the WDSysMon resource notification thread context

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HM Messages

Error Message    
 
    
    
   

%HA-HM-3-FPING_ERROR [chars]

Explanation    HA Health Monitor Fabric ping failed

Recommended Action    Shelf Manager should receive a critical alarm from HA Health Monitor for this error. The node should be reset by Shelf Manager. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HM-3-FPING_MISMATCH [chars]

Explanation    HA Health Monitor Fabric ping failed. When a received ping response does not match the transmitted ping, this indicates some kind of cell corruption or cell loss in the fabric or edges of the fabric.

Recommended Action    If problem persist, it indicates the bad hw in the system. Please contact TAC for fault isolation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HM-4-ERROR_INIT [chars], reason: [chars]

Explanation    HA Health Monitor failed to initialize due to internal software errors

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process hm location ' to verify that the process is up and running. If it is still non-operational, try doing 'process restart hm location ' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-HM-4-FPING_INCOMPLETE HM fabric ping only completed [unsigned int] of [unsigned int] pings (ret equals [hex])

Explanation    HA Health Monitor Fabric ping test sequence failed to complete. If there were any errors before it got disrupted, then these are reported separately. The test will be restarted again at next HM fping interval. If there are no other errors reported, this warning is rarely a cause for concern, unless it very frequently causes only a partial set of HM fabric pings to be completed.

Recommended Action    No action is required because HA Health Monitor will retry Fabric ping again

Error Message     
 
    
    
   

%HA-HM-4-FPING_RETRY_ERROR Fabric ping test failed for attempt: [dec], Node will be reset after [dec] retries

Explanation    HA Health Monitor Fabric ping failed but will retry again

Recommended Action    No action is required because HA Health Monitor will retry Fabric ping again.

IRM_CHKPT Messages

Error Message    
 
    
    
   

%HA-IRM_CHKPT-7-INIT_ERROR initialization error: [chars]: [dec] ([chars])

Explanation    An error was encountered during initialization of the checkpoint library. The message should indicate the error condition. This is most likely due to a coding error.

Recommended Action    No action is required.

LRD_inv Messages

Error Message    
 
    
    
   

%HA-LRD_inv-3-BAG_REGISTRATION Unable to register LRd's bag structures. '[chars]'

Explanation    LRd was unable to register bag structures.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-BAG_REGISTRATION Unable to register LRd's bag structures. '[chars]'

Explanation    LRd was unable to register bag structures.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-BAG_REGISTRATION Unable to register LRd's bag structures. '[chars]'

Explanation    LRd was unable to register bag structures.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MEM_ALLOC_FAIL Failed to allocated [dec] bytes of memory: [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MEM_ALLOC_FAIL Failed to allocated [dec] bytes of memory: [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MEM_ALLOC_FAIL Failed to allocated [dec] bytes of memory: [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MEM_ALLOC_FAIL Failed to allocated [dec] bytes of memory: [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_INVENTORY_FWD Error forwarding inventory: '[chars]'

Explanation    LRd was unable to read or write information needed to forward inventory in Admin space to the LR Plane.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_INVENTORY_FWD Error forwarding inventory: '[chars]'

Explanation    LRd was unable to read or write information needed to forward inventory in Admin space to the LR Plane.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-MSG_INVENTORY_FWD Error forwarding inventory: '[chars]'

Explanation    LRd was unable to read or write information needed to forward inventory in Admin space to the LR Plane.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-REDUNDANCY_STATE Unrecognized redundancy state [dec]

Explanation    LRd doesn't recognize redundancy state.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD_inv-3-REDUNDANCY_STATE Unrecognized redundancy state [dec]

Explanation    LRd doesn't recognize redundancy state.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-REDUNDANCY_STATE Unrecognized redundancy state [dec]

Explanation    LRd doesn't recognize redundancy state.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-REDUNDANCY_STATE Unrecognized redundancy state [dec]

Explanation    LRd doesn't recognize redundancy state.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-SYSDB_ITEM_ERROR sysdb_item_[chars]([chars]) returned '[chars]'

Explanation    SysDB returned an error to LRd.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-SYSDB_ITEM_ERROR sysdb_item_[chars]([chars]) returned '[chars]'

Explanation    SysDB returned an error to LRd.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-3-SYSDB_ITEM_ERROR sysdb_item_[chars]([chars]) returned '[chars]'

Explanation    SysDB returned an error to LRd.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD_inv-4-CANT_FIND_DSC LR Daemon library could not find the dSC.

Explanation    LRdlib could not find the dSC.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-4-CANT_FIND_DSC LR Daemon library could not find the dSC.

Explanation    LRdlib could not find the designated Shelf Controller.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD_inv-6-NON_DRP_PRIMARY WARNING: A node with unknown type or a non RP/DRP node [chars] is used as primary for SDR

Explanation    This is an informational message output during SDR configuration commit time only if a non-RP or non-DRP node is being assigned as primary to the SDR. Please note that if the node is not in IOX-RUN state, it's node type will not be determined.

Recommended Action    Verify the card type in the slot being configured as primary for the SDR. If not a DRP or RP card, please replace with valid card type.

Error Message     
 
    
    
   

%HA-LRD_inv-6-NON_DRP_PRIMARY WARNING: A node with unknown type or a non RP/DRP node [chars] is used as primary for SDR

Explanation    This is an informational message output during SDR configuration commit time only if a non-RP or non-DRP node is being assigned as primary to the SDR. Please note that if the node is not in IOX-RUN state, it's node type will not be determined.

Recommended Action    Verify the card type in the slot being configured as primary for the SDR. If not a DRP or RP card, please replace with valid card type.

Error Message     
 
    
    
   

%HA-LRD_inv-6-RESET_CARD_FOR_PAIRING LRd has reset the DRP '[dec]' to accommodate new pairing configuration.

Explanation    The DRP pairing configuration was changed. The card entering or leaving the pair needs to be reset in order to accommodate the new configuration.

Recommended Action    None.

Error Message     
 
    
    
   

%HA-LRD_inv-6-RESET_CARD_FOR_PAIRING LRd has reset the DRP '[dec]' to accommodate new pairing configuration.

Explanation    The DRP pairing configuration was changed. The card entering or leaving the pair needs to be reset in order to accommodate the new configuration.

Recommended Action    None.

Error Message     
 
    
    
   

%HA-LRD_inv-6-RESET_CARD_FOR_PAIRING LRd has reset the DRP '[dec]' to accommodate new pairing configuration.

Explanation    The DRP pairing configuration was changed. The card entering or leaving the pair needs to be reset in order to accommodate the new configuration.

Recommended Action    None.

Error Message     
 
    
    
   

%HA-LRD_inv-6-RESET_CARD_LR_CHANGE LRd has reset the card in slot '[dec]' because it was assigned to a new LR.

Explanation    The DRP pairing configuration was changed. The card entering or leaving the pair needs to be reset in order to accommodate the new configuration.

Recommended Action    None.

Error Message     
 
    
    
   

%HA-LRD_inv-6-UNPAIRED_DRP WARNING: A unpaired DRP node [chars] is being added as primary to SDR

Explanation    This is an informational message output during SDR configuration commit time only if an unpaired DRP node is being assigned to an SDR.

Recommended Action    *none*

Error Message     
 
    
    
   

%HA-LRD_inv-6-UNPAIRED_DRP WARNING: A unpaired DRP node [chars] is being added as primary to SDR

Explanation    This is an informational message output during SDR configuration commit time only if an unpaired DRP node is being assigned to an SDR.

Recommended Action    *none*

LRD Messages

Error Message    
 
    
    
   

%HA-LRD-2-EVENTATTACHFAIL event attach failure.

Explanation    The LR Daemon encountered an error when registering for synchronous or asynchronous events.

Recommended Action    If any of these messages recur, call your technical support representative for assistance.

Error Message     
 
    
    
   

%HA-LRD-2-SYSMGR_GET_NODE_STATE sysmgr get node state failure: [chars].

Explanation    sysmgr_get_node_state failed.

Recommended Action    If any of these messages recur, call your technical support representative for assistance.

Error Message     
 
    
    
   

%HA-LRD-2-SYSMGR_REGISTER node role change registration with sysmgr failed: [chars].

Explanation    sysmgr_register_node_state_change_evm failed.

Recommended Action    If any of these messages recur, call your technical support representative for assistance.

Error Message     
 
    
    
   

%HA-LRD-3-BAG_REGISTRATION Unable to register LRd's bag structures. '[chars]'

Explanation    LRd was unable to register bag structures.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD-3-MEM_ALLOC_FAIL Failed to allocated [dec] bytes of memory: [chars]

Explanation    The requested operation could not be accomplished because of a low memory.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD-3-MSG_CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD-3-MSG_INVENTORY_FWD Error forwarding inventory: '[chars]'

Explanation    LRd was unable to read or write information needed to forward inventory in Admin space to the LR Plane.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD-3-REDUNDANCY_STATE Unrecognized redundancy state [dec]

Explanation    LRd doesn't recognize redundancy state.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD-3-SYSDB_ITEM_ERROR sysdb_item_[chars]([chars]) returned '[chars]'

Explanation    SysDB returned an error to LRd.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%HA-LRD-4-CANT_FIND_DSC LR Daemon library could not find the dSC.

Explanation    LRdlib could not find the dSC.

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD-4-HEADLESS_SDR_STATE Headless SDR condition detected, reloading local node.

Explanation    Headless SDR condition was detected. The local card is being reset. This is not necessarily an error condition!

Recommended Action    Make sure the dSDRSC is up.

Error Message     
 
    
    
   

%HA-LRD-4-SDR_PLANE_READY_TIMEOUT Signalling SDR Plane Ready for SDR [chars] ([dec]) (mgmt nodes [dec] of [dec] are NOT READY yet) -[chars]

Explanation    SDR Plane ready is being signalled due to SDR plane ready timeout.

Recommended Action    Contact TAC.

Error Message     
 
    
    
   

%HA-LRD-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD-4-UNEXPECTED Unexpected: [chars]: [chars]: [hex]

Explanation    An unexpected condition encountered. This is not necessarily an error, but may help with debugging other problems elsewhere!

Recommended Action    Collect system log information. No action is required.

Error Message     
 
    
    
   

%HA-LRD-6-LATE_MGMT_NODE Management node [hex] in SDR [chars] ([dec]) is READY after SDR Plane Ready is signalled

Explanation    A management node in the specified SDR came up after SDR Plane ready for that SDR was signalled.

Recommended Action    Contact TAC.

REDCON_CLIENT Messages

Error Message    
 
    
    
   

%HA-REDCON_CLIENT-3-ERROR [chars]: [chars]: [hex]: [chars]

Explanation    A redcon client API failed in the indicated function, for the specified reason.

Recommended Action    Collect the function name and traceback information and forward to your next level of technical support. No action is required.

Error Message     
 
    
    
   

%HA-REDCON_CLIENT-7-MSG_SEND [chars]: Failed to send [chars] message to redcon: [hex]: [chars]

Explanation    An attempt to send a message to the redcon server failed with the specified reason. It may be the case that redcon had been restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

REDSTATS Messages

Error Message    
 
    
    
   

%HA-REDSTATS-3-SERVICE_CREATE Failed to create thread for service [dec], name [chars]: [chars]

Explanation    The system failed to create the thread that provides the indicated service. This is a fatal error for redstatsd.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-REDSTATS-7-SYSCALL [chars]: [chars](): [chars]

Explanation    A system call failed. The calling function, the failed call, and error are displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-REDSTATS-7-UNEXPECTED Unexpected: [chars]: [hex] : [chars]

Explanation    An unexpected condition encountered. This is not necessarily an error.

Recommended Action    Collect system log information. No action is required.

WD_STAT_PUB Messages

Error Message    
 
    
    
   

%HA-WD_STAT_PUB-3-SHMEM [chars]: Error. initializing shared memory. ([chars])

Explanation    Failed to initialize the shared memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-WD_STAT_PUB-3-SHM_EDM_ERR [chars]: [chars], ([unsigned int])

Explanation    A shared memory for statistics area might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-WD_STAT_PUB-3-SHM_ERR [chars]: [chars], version: [unsigned int], magic: [hex]

Explanation    A shared memory for statistics area might be corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%HA-WD_STAT_PUB-7-SYSCALL [chars]: [chars](): [chars]

Explanation    A system call failed. Error reason will be displayed on the console.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.