Cisco IOS XR System Error Message Reference Guide, Release 3.8
Layer 2 Messages
Downloads: This chapterpdf (PDF - 2.11MB) The complete bookPDF (PDF - 45.06MB) | Feedback

Layer 2 Messages

Table Of Contents

Layer 2 Messages

10GE_PLIM Messages

ACCT_SVR Messages

ALPHA_TCAM Messages

ALPHA Messages

ASIC_ERRORS Messages

ASIC_SCAN_SERVER Messages

ATM_ILMI Messages

ATM_INARP Messages

ATM_NETIO Messages

ATM_OAM Messages

ATM_RM Messages

ATM_SAAR Messages

ATM_SOCKET Messages

ATM_SOP Messages

ATM_VCM Messages

atmdrv Messages

ATMGCMGR Messages

BFD Messages

BM_PD Messages

BM Messages

C12000_FR Messages

CDP Messages

CEMA Messages

CFMMIB Messages

CHDLC_EA Messages

CHDLC_MA Messages

CHDLC_SOCK Messages

CHDLCDLL Messages

CHIPs Messages

COMMS Messages

d1qnetio Messages

DI Messages

DIV2_DM Messages

DRIVERS_UTIL Messages

DWDM Messages

E3EGRESSQ Messages

E3INGRESSQ Messages

E5EGRESSQ Messages

E5INGRESSQ Messages

EGRESSQ_HW_DLL Messages

EGRESSQ Messages

ELO_COMMON Messages

ELO Messages

ELOGM Messages

EMA Messages

EPI Messages

ETH_OUTPUT Messages

ETHER_NETIO Messages

ether_spa_plugin Messages

ETHER Messages

ETHERNET Messages

FB_PLIM Messages

FB_SHIM_ENCAP Messages

FE_PLIM Messages

FIB_IPV4 Messages

FIB_IPV6 Messages

FR_LMI Messages

FR_UV Messages

FR_VCM_EA Messages

FR_VCM Messages

FRMIB Messages

FWD_EDGE_COMMON Messages

GATM Messages

GDO Messages

GE_ASIC_PRP3 Messages

GE_ASIC Messages

GE Messages

GSR_aib Messages

GSR_edge_fwd_lib Messages

GSR Messages

GT64115 Messages

gulf Messages

HALE_QOS Messages

HALE_TCAM Messages

HFA_COMMON Messages

HFA_LIB Messages

if_discovery Messages

IOB Messages

IPV6_EA Messages

IXP2800_FWD Messages

IXP2800_HW Messages

IXP2800_VFW Messages

JACKET Messages

JDAM Messages

L2C Messages

L2FIB_DEBUG Messages

L2FIB_LIB Messages

L2FIB_SHM Messages

L2FIB Messages

L2TP Messages

L2VPN_DEBUG Messages

L2VPN_PW Messages

L2VPN Messages

LACP_LITE Messages

MARVEL Messages

METRO_STATS_API Messages

METRO_STATS Messages

METRO_UIDB Messages

MFR_EA_LTRACE_DLL Messages

MFR_EA_LTRACE Messages

MFR_EA Messages

MFR_MA Messages

MICKEY Messages

MLCTRLR Messages

MMSMLIB Messages

MOTHRA Messages

MOUSE Messages

MULTILINK_UV Messages

Multilink Messages

ND Messages

OAMMIB Messages

OC768_FRAMER_ASIC Messages

OPTICS Messages

PFILTER_EA Messages

PLAOC768_API Messages

PLAOC768 Messages

PLAT_L2FIB_VPLS Messages

PLATFORM_ATM_OAM Messages

plim_4p_oc12 Messages

PLIM_4P_OC192 Messages

PLIM_ASIC_API Messages

PLIM_ASIC Messages

PLIM_CLKSEL Messages

PLIM_FPGA Messages

PLIM_IOX_4P_GE Messages

PLIM_LIB Messages

plim_oc48 Messages

PLIM_OC768 Messages

PLIM Messages

pm5315 Messages

pm5316 Messages

PM622 Messages

PMSAR Messages

POS Messages

PPP_EA Messages

PPP_FSM Messages

PPP_GBL_CFG Messages

PPP_LCP Messages

PPP_lite Messages

PPP_MA Messages

PPP_NETIO Messages

PPP_SOCK Messages

PPPOE_EA Messages

PPPOE_GBL_CFG Messages

PPPOE_MA Messages

PRECAM Messages

PSE Messages

PSELIB Messages

QM_E5 Messages

QM Messages

QUEUEING Messages

RSMLIB Messages

SLARP_EA Messages

SLARP_LITE Messages

SLARP Messages

SLOGIC Messages

SONET_APS Messages

SONET_LOCAL Messages

SPA_192 Messages

SPA_ATM_V2 Messages

SPA_C_SHIM Messages

SPA_CHOC_DSX Messages

SPA_ETHER Messages

SPA_FPD Messages

SPA_OC3_OC12 Messages

SPA_OC48 Messages

SPA_PLIM_SB Messages

SPA_T3E3 Messages

SPA Messages

SPAMSG Messages

SPU_VFW_LIB Messages

SPU_VFW Messages

SRP Messages

STP_IO Messages

STP_LIB Messages

STP Messages

STREE Messages

T1E1 Messages

T3E3 Messages

TCAM_RM_CARVE_VERIFY Messages

TCAM_RM Messages

UDLD Messages

UIDB_RM Messages

VCM_CLIENT Messages

VCM_EA Messages

VCM Messages

vlan_netio Messages

vlea Messages

vlma Messages

VPA_1P_OC192 Messages

VPA_8P_GE Messages

VPA_RULES Messages

WAHOO Messages

WAN_INARP Messages

WAN_LIB_IFDB Messages

WAN_LIB_VCC Messages

XCONNECT Messages


Layer 2 Messages


This section contains all Layer 2 related System Error Messages, including Ethernet drivers, Packet-over-Sonet (PoS), SONET, PLIMS, and so forth. The following facility codes are represented in this module:

10GE_PLIM Messages

ACCT_SVR Messages

ALPHA_TCAM Messages

ALPHA Messages

ASIC_ERRORS Messages

ASIC_SCAN_SERVER Messages

ATM_ILMI Messages

ATM_INARP Messages

ATM_NETIO Messages

ATM_OAM Messages

ATM_RM Messages

ATM_SAAR Messages

ATM_SOCKET Messages

ATM_SOP Messages

ATM_VCM Messages

atmdrv Messages

ATMGCMGR Messages

BFD Messages

BM_PD Messages

BM Messages

C12000_FR Messages

CDP Messages

CEMA Messages

CFMMIB Messages

CHDLC_EA Messages

CHDLC_MA Messages

CHDLC_SOCK Messages

CHDLCDLL Messages

CHIPs Messages

COMMS Messages

d1qnetio Messages

DI Messages

DIV2_DM Messages

DRIVERS_UTIL Messages

DWDM Messages

E3EGRESSQ Messages

E3INGRESSQ Messages

E5EGRESSQ Messages

E5INGRESSQ Messages

EGRESSQ_HW_DLL Messages

EGRESSQ Messages

ELO_COMMON Messages

ELO Messages

ELOGM Messages

EMA Messages

EPI Messages

ETH_OUTPUT Messages

ETHER_NETIO Messages

ether_spa_plugin Messages

ETHER Messages

ETHERNET Messages

FB_PLIM Messages

FB_SHIM_ENCAP Messages

FE_PLIM Messages

FIB_IPV4 Messages

FIB_IPV6 Messages

FR_LMI Messages

FR_UV Messages

FR_VCM_EA Messages

FR_VCM Messages

FRMIB Messages

FWD_EDGE_COMMON Messages

GATM Messages

GDO Messages

GE_ASIC_PRP3 Messages

GE_ASIC Messages

GE Messages

GSR_aib Messages

GSR_edge_fwd_lib Messages

GSR Messages

GT64115 Messages

gulf Messages

HALE_QOS Messages

HALE_TCAM Messages

HFA_COMMON Messages

HFA_LIB Messages

if_discovery Messages

IOB Messages

IPV6_EA Messages

IXP2800_FWD Messages

IXP2800_HW Messages

IXP2800_VFW Messages

JACKET Messages

JDAM Messages

L2C Messages

L2FIB_DEBUG Messages

L2FIB_LIB Messages

L2FIB_SHM Messages

L2FIB Messages

L2TP Messages

L2VPN_DEBUG Messages

L2VPN_PW Messages

L2VPN Messages

LACP_LITE Messages

MARVEL Messages

METRO_STATS_API Messages

METRO_STATS Messages

METRO_UIDB Messages

MFR_EA_LTRACE_DLL Messages

MFR_EA_LTRACE Messages

MFR_EA Messages

MFR_MA Messages

MICKEY Messages

MLCTRLR Messages

MMSMLIB Messages

MOTHRA Messages

MOUSE Messages

MULTILINK_UV Messages

Multilink Messages

ND Messages

OAMMIB Messages

OC768_FRAMER_ASIC Messages

OPTICS Messages

PFILTER_EA Messages

PLAOC768_API Messages

PLAOC768 Messages

PLAT_L2FIB_VPLS Messages

PLATFORM_ATM_OAM Messages

plim_4p_oc12 Messages

PLIM_4P_OC192 Messages

PLIM_ASIC_API Messages

PLIM_ASIC Messages

PLIM_CLKSEL Messages

PLIM_FPGA Messages

PLIM_IOX_4P_GE Messages

PLIM_LIB Messages

plim_oc48 Messages

PLIM_OC768 Messages

PLIM Messages

pm5315 Messages

pm5316 Messages

PM622 Messages

PMSAR Messages

POS Messages

PPP_EA Messages

PPP_FSM Messages

PPP_GBL_CFG Messages

PPP_LCP Messages

PPP_lite Messages

PPP_MA Messages

PPP_NETIO Messages

PPP_SOCK Messages

PPPOE_EA Messages

PPPOE_GBL_CFG Messages

PPPOE_MA Messages

PRECAM Messages

PSE Messages

PSELIB Messages

QM_E5 Messages

QM Messages

QUEUEING Messages

RSMLIB Messages

SLARP_EA Messages

SLARP_LITE Messages

SLARP Messages

SLOGIC Messages

SONET_APS Messages

SONET_LOCAL Messages

SPA_192 Messages

SPA_ATM_V2 Messages

SPA_C_SHIM Messages

SPA_CHOC_DSX Messages

SPA_ETHER Messages

SPA_FPD Messages

SPA_OC3_OC12 Messages

SPA_OC48 Messages

SPA_PLIM_SB Messages

SPA_T3E3 Messages

SPA Messages

SPAMSG Messages

SPU_VFW_LIB Messages

SPU_VFW Messages

SRP Messages

STP_IO Messages

STP_LIB Messages

STP Messages

STREE Messages

T1E1 Messages

T3E3 Messages

TCAM_RM_CARVE_VERIFY Messages

TCAM_RM Messages

UDLD Messages

UIDB_RM Messages

VCM_CLIENT Messages

VCM_EA Messages

VCM Messages

vlan_netio Messages

vlea Messages

vlma Messages

VPA_1P_OC192 Messages

VPA_8P_GE Messages

VPA_RULES Messages

WAHOO Messages

WAN_INARP Messages

WAN_LIB_IFDB Messages

WAN_LIB_VCC Messages

XCONNECT Messages

10GE_PLIM Messages

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_LOSS Interface [chars], Detected RX Loss of Signal

Explanation    The PLIM received an Rx LOS or LF on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_LOSS Interface [chars], Detected RX Loss of Signal

Explanation    The PLIM received an Rx LOS or LF on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_RF Interface [chars], Detected Remote Fault

Explanation    The PLIM received a remote fault on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_RF Interface [chars], Detected Remote Fault

Explanation    The PLIM received a remote fault on the given interface which will result in a link flap.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_UNKNOWN Interface [chars], Detected PLA Fault

Explanation    The PLIM PLA ASIC had an unkown fault on the given interface which will result in a link flap.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-RX_UNKNOWN Interface [chars], Detected PLA Fault

Explanation    The PLIM PLA ASIC had an unkown fault on the given interface which will result in a link flap.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-STARTUP PLIM Process Error: [chars]

Explanation    The PLIM process failed to spawn correctly.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-UNSUP This PLIM is no longer supported

Explanation    This PLIM is a prototype and is not longer supported

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-XGXS_RX_SYNC An XGXS RX lane failed to syncronize for port [dec].

Explanation    The XGXS Rx Lanes failed to syncronize after Rx Xenpak OIR or Link Flap.

Recommended Action    Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-XGXS_RX_SYNC An XGXS RX lane failed to syncronize for port [dec].

Explanation    The XGXS Rx Lanes failed to syncronize after a Xenpak OIR or Link Flap.

Recommended Action    Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-2-XGXS_TX_SYNC An XGXS TX lane failed to syncronize for port [dec].

Explanation    The XGXS Tx Lanes failed to syncronize after a Xenpak OIR or Link Flap.

Recommended Action    Try to shut/no shut the port. If the MAC does not get enabled, then A physical OIR of the Xenpak device will be needed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-3-OIM_ERR An Optic Interface Module error occurred at port [dec], reason : [chars]

Explanation    A fatal error occurred in 10GE PLIM driver OIM rule validation.

Recommended Action    1. Remove the Xenpak and check if it is Cisco qualified Xenpak. 2. If it is Cisco qualified Xenpak, check DWDM Xenpak placement rule.

Error Message     
 
    
    
   

%L2-10GE_PLIM-3-OIM_ERR An Optic Interface Module error occurred at port [dec], reason : [chars]

Explanation    A fatal error occurred in 10GE PLIM driver OIM rule validation.

Recommended Action    1. Remove the Xenpak and check if it is Cisco qualified Xenpak. 2. If it is Cisco qualified Xenpak, check DWDM Xenpak placement rule.

Error Message     
 
    
    
   

%L2-10GE_PLIM-4-INVALID_MAC Failed to get MAC address for Slot [dec], Port [dec], Interface assigned random MAC address.

Explanation    PLIM driver was unable to get a MAC address for the interface.

Recommended Action    Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-4-INVALID_MAC Failed to get MAC address for [chars], Interface assigned random MAC address.

Explanation    PLIM driver was unable to get a MAC address for the interface.

Recommended Action    Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-ERR_UPGRADE [chars]

Explanation    This is a Informational message in the plim_8p_10ge driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-ERR_UPGRADE [chars]

Explanation    This is a Informational message in the plim_8p_10ge driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-OIM_OIR Optic Interface Module [chars] for port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port has either been inserted or removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-10GE_PLIM-6-OIM_OIR Optic Interface Module [chars] for port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port has either been inserted or removed.

Recommended Action    No action is required.

ACCT_SVR Messages

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INIT init error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered a software error while initializing. The process is exiting and will be restarted. System will not be affected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-3-ERR_INTERNAL software internal error: [chars] - restarting process to recover.

Explanation    The process acct_svr encountered an internal error. The process is exiting and will be restarted. System will not be affected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-4-HFA_CLK_DELTA_FAIL HFA get clock delta has failed consecutively [dec] out of [dec] total times.

Explanation    The process acct_svr has failed to get the HFA clock delta for the given consecutive times. The flow report uses the forwarding asic clock which may be slightly off from the system clock. To correct the timestamp, the HFA clock delta is retrieve and on failure, the previously recorded delta is used. This log is printed out after so many consecutive failures to retrieve the clock delta, which may lead to skewed timestamps in the flow report.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ACCT_SVR-7-ISR_FIFO_USAGE_FLAG ISR FIFO ring buffer usage is [chars] threshold ([dec]). direction: [dec] num_items equals [dec]

Explanation    The process acct_svr detected the condition of ISR FIFO ring buffer usage above or below the threshold. If the usage is above the threshold, the process acct_svr will bring the ISR FIFO ring buffer usage back to below the threshold after a while. Traffic will not be affected by this condition.

Recommended Action    No action is required.

ALPHA_TCAM Messages

Error Message     
 
    
    
   

%L2-ALPHA_TCAM-3-ERROR_MSG
[chars], rc equals [hex], [chars]

Explanation    This is a error message in the HFA Alpha driver to indicate tcam carving error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ALPHA Messages

Error Message     
 
    
    
   

%L2-ALPHA-3-ERR_ACCESS Memory access error: [chars]: Err equals [chars]

Explanation    A memory access error occurred in programable switching engine (PSE) driver which involves exiting the process. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ALPHA-3-ERROR_MSG
[chars] [chars]: [hex] [hex]

Explanation    This is a error message in the HFA Alpha driver to indicate either anomolies which are not service impacting. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ALPHA-6-VERSION_WARNING [chars] [chars] error [hex]

Explanation    This is an informational message in the programable switching Engine driver to indicate an operation. %s - is the warning message. %s - is the decoded warning reason. %x - is the decoded error code.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ALPHA-7-INFO_MSG [chars] [chars]

Explanation    This is an informational message in the programable switching Engine driver to indicate an operation. %s - indicates the direction of the PSE. %s - is the decoded informational reason.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ALPHA-7-PAIR_REG [chars] [chars] PAIR registers:
pcr [hex] plu_pirl [hex] pirm1 [hex]
pirm2 [hex] pirh [hex] ip_dst [hex]
ip_src [hex] mpls_label [hex] mpls_info [hex]
ip_header [hex] l4_port [hex] start_adr [hex]
msq_info [hex] ltr [hex] tlu_force [hex]
pre_cam_prof [hex] lbl1_lo [hex] lbl1_hi [hex]
tlbl2_lo [hex] lbl2_hi [hex] leaf1_word1 [hex]
leaf1_word2 [hex] leaf1_word3 [hex] leaf1_word4 [hex]
leaf2_word1 [hex] leaf2_word2 [hex] leaf2_word3 [hex]
tleaf2_word4 [hex] tcam_cont [hex]

Explanation    An error occurred in programable switching engine (PSE) driver which indicates anomalies. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ALPHA-7-PHB_DUMP
[hex]: [hex] [hex] [hex] [hex]

Explanation    This is a error message in the programable switching engine to indicate either anomolies which are not service impacting. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ASIC_ERRORS Messages

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_CREATE ASIC Error library has failed to create an Event Connection Manager. Reason: [chars].

Explanation    The ASIC Error library encountered an error during the creation of the Error Connection Manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_ECM_REG ASIC Error library has failed to register a connection notification handler with the Event Connection Manager. Reason: [chars].

Explanation    ASIC Error library encountered an error while setting up a SYSDB notofication handler with the event connection manager.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB ASIC Error library failed to [chars]. Reason: [chars].

Explanation    ASIC Error library encountered an error during the specified SYSDB operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_BAG_ENCODE ASIC Error library: Encountered SYSDB Bag encode error [chars] during [chars] operation.

Explanation    ASIC error library encountered a SYSDB encode error while performing the indicated operation.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

Error Message     
 
    
    
   

%L2-ASIC_ERRORS-7-ERR_SYSDB_EDM_REG ASIC Error library has failed to register an EDM. Reason: [chars].

Explanation    The ASIC Error library was unable to become an external data manager despite having a connection to the SYSDB.

Recommended Action    An error would be reported to the client application which should handle this condition appropriately. *None*

ASIC_SCAN_SERVER Messages

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-2-NODE_BRINGDOWN [chars]

Explanation    This is a message in the Asic Scan Server to indicate that it has triggerred a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan operation is reported.

Recommended Action    Run the board diagnostics.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-2-NODE_BRINGDOWN [chars]

Explanation    This is a message in the Asic Scan Server to indicate that it has triggerred a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan operation is reported.

Recommended Action    Run the board diagnostics.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_EVM_CREATE ASIC Scan Server failed to create the event manager: Reason equals [chars].

Explanation    ASIC scan server has failed to create the event manager. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_EVM_CREATE ASIC Scan Server failed to create the event manager: Reason equals [chars].

Explanation    ASIC scan server has failed to create the event manager. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_INIT ASIC Scan Server encountered error [[chars]]: Reason equals [chars].

Explanation    ASIC scan server has failed the initialization sequence due to the specified reason. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_INIT ASIC Scan Server encountered error [[chars]]: Reason equals [chars].

Explanation    ASIC scan server has failed the initialization sequence due to the specified reason. This would result in the automatic restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_IO ASIC Scan Server failed to [chars]: Reason equals [chars].

Explanation    ASIC scan server has failed the specified io operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ASIC_SCAN_SERVER-7-ERR_IO ASIC Scan Server failed to [chars]: Reason equals [chars].

Explanation    ASIC scan server has failed the specified io operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_ILMI Messages

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_INARP Messages

Error Message     
 
    
    
   

%L2-ATM_INARP-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_INARP-2-NOMEM Operation failed due to memory shortage, function: [chars]

Explanation    Memory on the box is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_NETIO Messages

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-CARD_DLL Failed to open card specific dll [chars]

Explanation    Card specific dll may not be present

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INSERT_DICT Insertion to ATM Netio Dictionary fails

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INVALID_DLL DLL not found for the specified card : [chars]

Explanation    Check the installation Dlls missing from package

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-LOAD_PATH Failed to get load path env variable for dll [chars]

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The DLL has failed to acquire the required amount of memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSE_FAILURE Failed to parse atm_netio.rules at line: [chars]

Explanation    The file atm_netio.rules has been modified and parsing fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSER_NULL_PATH Path to load the atm_netio.rules is NULL

Explanation    The path to atm_netio.rules file cannot be located.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_OAM Messages

Error Message     
 
    
    
   

%L2-ATM_OAM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_OAM-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_OAM-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_RM Messages

Error Message     
 
    
    
   

%L2-ATM_RM-1-SYSDB_ERR [chars] : [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_RM-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_RM-2-NOMEM Failed to allocate [dec] bytes due to memory shortage

Explanation    Memory on the router is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_RM-4-BANDWIDTH_ERR [chars] : Bandwidth available [unsigned int] : Failed to reserve [unsigned int]

Explanation    Insufficient bandwidth available. possible cause: Too many vc's inheriting QoS from class parameters

Recommended Action    check vc class configuration on interface If there are vcs you want specific QoS values for under the main interface, try configuring QoS on these vcs before applying class to the interface in order to stop unwanted inheritance. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_SAAR Messages

Error Message     
 
    
    
   

%L2-ATM_SAAR-2-INIT Failed to initialise ATM SAAR: [chars] ([chars])

Explanation    There was an error initialising the ATM SAAR component.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SAAR-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_SOCKET Messages

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-NOMEM Allocation of [dec] bytes failed due to memory shortage

Explanation    Memory on the router is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_SOCKET-3-RESMGR_ATTACH Failed to setup atm socket as a resource manager: [chars]

Explanation    The atm_io process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_SOP Messages

Error Message     
 
    
    
   

%L2-ATM_SOP-3-INTR ATM SOP Intr: [chars]: [dec]: [chars]: [dec] [chars]

Explanation    The SOP FPGA has been interrupted due a hardware error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SOP-7-DEBUG ATM SOP DEBUG: [chars]: [hex]: [hex]: [hex]

Explanation    ATM SOP debug message

Recommended Action    No action is required.

ATM_VCM Messages

Error Message     
 
    
    
   

%L2-ATM_VCM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCM-2-INTERNAL_ERR [chars] : [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCM-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

atmdrv Messages

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR [chars], [dec] error, reason:[chars]

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_ENCAP [chars] - [dec]: [chars] rc equals [hex] connid equals [dec] key equals [hex]

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_STS [chars] - [dec]: [chars] (rc equals [hex])

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_VC [chars] - [dec]: [chars] (connid equals [dec])

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-3-cpk_err [chars]. Port [dec]: number of occurance equals [unsigned int] intr_status equals [hex]

Explanation    atmdrv cpk24 interrupt handling related errors, or alerts

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-4-warning [chars], [dec] warning, reason:[chars]

Explanation    atmdrv warning message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, and mail this message to your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-7-db_dump reason:[chars] port:[dec], vpi/vci:[dec]/[dec], connid:[dec], channels(r/s):[hex]/[hex], shape:[dec], encap:[dec]

Explanation    atmdrv debug message

Recommended Action    None

ATMGCMGR Messages

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-DBG_INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the debug events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BFD Messages

Error Message     
 
    
    
   

%L2-BFD-4-ASYNC_DETECT_TIMER_FAULTY_EXPIRY BFD Async Detect timer expired for neighbor [chars] interface [chars] even when async pkt received within timer duration, timer_duration equals [unsigned int] ms, [unsigned int] ms elapsed since last async pkt received

Explanation    BFD Async Detect timer expired even when async pkt received within timer duration, timer_duration

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_HIGH_WATERMARK BFD PPS allocation exceeds 90 percent of maximum.

Explanation    BFD has allocated 90 percent of its packet per second allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_LOW_WATERMARK BFD PPS allocation now less 85 percent of maximum.

Explanation    BFD has released some of the previously allocated packet per second usage and is now at less than 85 percent of its allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES No resources for session to neighbor [chars] on interface [chars], interval equals [unsigned int] ms[chars]

Explanation    The BFD session can not be created or modified due to lack of resources.

Recommended Action    Remove other BFD sessions to free resources for this session

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES_CLR Lack of resources condition has cleared for session to neighbor [chars] on interface [chars]

Explanation    Resources are now available for this session.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_REMOVED BFD session to neighbor [chars] on interface [chars] has been removed

Explanation    The BFD session has been removed. This is due to the application(s) removing the BFD session. This can happen as a result of BFD being unconfigured under the application(s) or as a result of the application(s) adjacency being removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_DOWN BFD session to neighbor [chars] on interface [chars] has gone down. Reason: [chars]

Explanation    The BFD session has gone down. This may be as a result of the forwarding path being down.

Recommended Action    Determine if the forwarding path to the neighbor has gone down.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_UP BFD session to neighbor [chars] on interface [chars] is up

Explanation    The BFD session is now up.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_VERSION_CHANGE BFD session to neighbor [chars] on interface [chars] is administratively down due to version change from version [unsigned int] to version [unsigned int]

Explanation    The BFD session has been brought administratively down to change protocol version.

Recommended Action    No action is required.

BM_PD Messages

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_CERRNO Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars]

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-3-DLL_TRACE Failure initializing tracing ([chars] buffer). Error: [chars]

Explanation    A failure occurred during the initialization of tracing for the adjacency management DLL. This will cause the DLL to be unloaded, and adjacency programming will not happen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_CMPL_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the bundlemgr adjacency process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM_PD-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BM Messages

Error Message     
 
    
    
   

%L2-BM-3-ERR_IIR_MEMBERSHIP Link [chars] in [chars] reported by IIR in bundle [chars].

Explanation    When synchronising with IIR during restart the link was reported to be in a different bundle from the checkpoint records of the process. This should never happen and is not recoverable. The information from IIR was discarded and the process is now out of step with IIR, possibly leading to further problems.

Recommended Action    Delete the checkpoint data for the Bundle Manager process that reported the error (run rm /tmp/chkpt_bundlemgr_distrib*) and restart the process.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ACTIVATE Failure during activation of [chars]. Error: [chars]

Explanation    A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ADMINSTATE Unable to [chars] administrative state for [chars] on [chars]. Error: [chars]

Explanation    The operation attempted failed. For a set this may mean that the link is UP when the bundle is SHUTDOWN. This can be resolved by 'no shut' and then 'shut' of the bundle. For a clear this may mean that the link remains DOWN when it has been removed from the bundle. This can be resolved by re-adding and then removing the link from the bundle again.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_COMMS_LINK_UNKNOWN Received link update response for unknown interface (ifhandle [hex]). Ignoring response

Explanation    An update has been exchanged between the Bundle Manager processes, and a response has been received for an unknown interface. If the interface has been recently unconfigured as a bundle member this could explain the error, otherwise it shows some unknown error condition.

Recommended Action    If the specified interface handle is expected to be a bundle member still then restarting all bundle processes should get things back into step. If the error references a recently unconfigured bundle member, then the message is probably harmless.

Error Message     
 
    
    
   

%L2-BM-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process has exited and restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_GROUP_CREATE Unable to create GSP group. Error: [chars]

Explanation    Creation of the group used to communicate between Bundle Manager processes failed. This resulted in the restart of the process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show gsp groups command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show gsp groups output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IDENTICAL Attempting to order [chars] and [chars] that have identical port information

Explanation    The comparison between an entry in the bundle member list and a new entry to be inserted showed that both had identical port data. Because of this the new link could not be inserted into the list and the operation leading to this failed.

Recommended Action    Remove and re-add the configuration for the links named in the message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_DATA Invalid [chars] specified by IIR for CH[hex]: [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognised values for that type. The information is invalid and the result is that adjacencies for this bundle cannot be programmed in hardware.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_HANDLE Invalid (NULL) interface handle supplied for a bundle by IIR

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    If this event can be associated with changes to a particular bundle then delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_DATA Invalid [chars] specified by IIR for CH[hex] member CH[hex]: [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognised values for the type. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_HANDLE Invalid (NULL) interface handle supplied by IIR for a member of CH[hex]

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_OP Unable to report IIR op failure for b_ifh [hex], m_ifh [hex] (op [chars], state [chars]). Error: [chars]

Explanation    An error occurred processing the IIR event and the bundle EA process was unable to report this error back to IIR. This may lead to some inconsistency with the bundle membership in the data plane not matching what is intended according to the control plane.

Recommended Action    The failure to report the error back to IIR suggests a problem in the connection to IIR. This may have been a transient problem, but restarting ifmgr and/or the bundlemgr_ea process on the location of the error might be necessary. The error that should have been reported also needs to be dealt with. This error may have come from some lower layer platform component, possibly a resource allocation error. If the error code provides some information as to the failure then take action appropriate to the error. If the error code is not specific then take action according to whether the event was a link activation or a link deactivation/deletion. For activation problems unconfigure and reconfigure the member link - if this fails try restarting the bundlemgr_ea process after unconfiguring the member link. For deactivation/deletion failures try restarting the improxy process to trigger a complete resync by the bundlemgr EA.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_SUB_HANDLE Invalid (NULL) interface handle supplied by IIR for a sub-interface of CH[hex]

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT_ENS Failure to initialise ENS - retry scheduled. Error: [chars]

Explanation    A failure occurred during the initialization of ENS library in the process. This probably indicates an underlying more severe problem. A retry will be attempted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_LINK_ATTACHED Link [chars] is attached to [chars] that is thought to have no attached members.

Explanation    This process believes that there are no aggregatable links, but this link is marked as attached. This error is most likely caused by failing to attach or detach a link correctly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MEM_ALLOC Unable to allocate [unsigned int] bytes of memory.

Explanation    Memory allocation failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_CLEANUP Failure during cleanup of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the cleanup of the DLL. This may result in the DLL not being completely cleaned up, possibly causing errors in a subsequent re-initialization of the DLL.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_INIT Failure during intialization of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the initialization of the DLL. This resulted in the DLL not being loaded into the SNMP agent, and thus the MIB services will not be available.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MOVING_LINK Unable to modify bundle id on link [chars] to [unsigned int]: [chars]. Process exiting to recover

Explanation    An error has occurred while attempting to change the bundle id configured on the indicated interface. The process is restarting to recover from this error.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the error indicates a memory issue, try increasing the memory available on this card.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MTU_IMPOSE Imposition of configured MTU failed for [chars], will continue to use previous value: [unsigned int]

Explanation    The MTU imposition was rejected by IM or another client. The bundle will continue to operate with the previously configured MTU.

Recommended Action    Check that the configured MTU is within approrpriate ranges for the interface type and network layer protocols on the interface. Remove the configuration and reapply.

Error Message     
 
    
    
   

%L2-BM-4-ERR_NETIO_INIT Failure [chars] in the bundle NetIO DLL during [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the bundle NetIO DLL. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.

Recommended Action    If the error message indicates the failure is low memory condition, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_NODE_SET The replication node set for bundle [chars] was inconsistent following addition or update of link [chars] (new MID [hex], [hex], [hex], old MID [hex], [hex], [hex]) - Process has recovered but other processes may be inconsistent

Explanation    Following a link update, the replication info for the indicated bundle had become inconsistent. This indicates that the process was not notified of a node removal event - the bundlemgr_distrib process has fixed this inconsistency, though other processes may remain inconsistent.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_PAKMAN Unable to handle pakman corruption error: [chars]. Process exiting

Explanation    A packet manager corruption has been reported and the Bundle Manager process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RECREATE_BUNDLE Unable to recreate bundle CH[hex]. Error: [chars]

Explanation    When recovering the checkpointed data for a bundle, an error occurred and the data is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show interface bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show adjacency bundle name detail hardware location loc of error command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show adjacency bundle name detail hardware location loc of error output, call your Cisco technical support representative and provide the representative with the gathered information. If the bundle appears correctly in the output of all three commands then no further action is required, otherwise unconfigure and reconfigure the bundle.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RECREATE_LINK Unable to recreate link [chars] in [chars]. Error: [chars]

Explanation    When recovering the checkpointed data for a link, an error occurred and the data is lost.

Recommended Action    Identify the bundle in which the link was a member. Copy the error message exactly as it appears on the console or in the system log. Issue the show interface bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle bundle name command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle bundle name output, call your Cisco technical support representative and provide the representative with the gathered information. If the member appears correctly in the output of both commands then no further action is required, otherwise unconfigure and reconfigure the member.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_BUNDLE Unable to repair bundle CH[hex] checkpoint structures. Error: [chars]

Explanation    When repairing the checkpoint structures for the bundle database an error occurred for named bundle and the bundle was not checkpointed. The next time an attempt is made to checkpoint the bundle it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_DATABASE Unable to repair [chars] database. Failure during checkpoint [chars]. Error: [chars]

Explanation    When repairing the checkpoint structures for the named database an error occurred in the database checkpoint registration. As a result the process was intentionally restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_LINK Unable to repair checkpoint structures for link [chars] in [chars]. Error: [chars]

Explanation    When repairing the checkpoint structures for the link database an error occurred for named link and the link was not checkpointed. The next time an attempt is made to checkpoint the link it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPLICATE Replication failed for [chars], when adding member [chars]. Error: [chars]

Explanation    When attempting to replicate the bundle to the member interface location, the replication operation failed. This probably happened because some hardware resource on the LC where the member is located was exhausted. The record of the member will be removed from the bundle process on the RP but will still be referenced by the bundle process on the LC.

Recommended Action    Determine whether the hardware resources for the LC have been oversubscribed, e.g. more VLANs on the LC and on the bundle that the LC can support. If this is the case, reduce the number of allocated VLANs. Then remove the member configuration and reapply.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESTORE_LINK Unable to restore link [chars] in [chars]. [chars]. Error: [chars]

Explanation    When restoring the link an error occurred and to maintain consistency the data was removed. It is likely, given the error, that the link had been OIR removed.

Recommended Action    Verify that the link has not been OIR removed. If it has not, remove the bundle membership configuration and reapply it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_EXCEED_IIR Exceeded the IIR resync limit for [chars]. Process exiting.

Explanation    The maximum number of attempts to resync with IIR have been exceeded for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_SCHED_IIR Unable to schedule an IIR resync for [chars]. Process exiting.

Explanation    An attempt to schedule a resync with IIR has failed for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED Exceeded maximum number of retries for [chars]

Explanation    After attempting to resend or query information a number of times, the retry limit has been exceeded and no more attempts will be made. The effect of the message will therefore be lost. The impact will depend on the message which was lost. If the message refers to a global error then the process will exit and be restarted.

Recommended Action    If the message referred to a global error then check that the process has restarted successfully. If the message referred to a bundle or bundle member then check that the object is still configured and still exists. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_GSP Retry limit for GSP initialization exceeded: [chars]

Explanation    After attempting to create the GSP group used for communications with the Bundle Manager process on another node a number of times, the retry limit has been exceeded. The cause of the failure is very likely to be some external communication failure - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.

Recommended Action    Check that other processes are not reporting similar communication errors, as this is likely to be a general communication problem. The Bundle Manager process has exited and will be restarted, so no action is needed, though unless the communication problem is resolved the process will still not be able to startup.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_IMP Exceeded the retry limit for IMP events.

Explanation    The maximum number of attempts to retry an IMP message has been exceeded. An error has occurred in the clean up of a bundle, so there may be residual data for the bundle in the linecard components which could cause subsequent problems. Restart the process that reported the error to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_SYSTEM_MAC Retry limit for system MAC address query exceeded: [chars]

Explanation    After attempting to query the system MAC address from SDRd a number of times, the retry limit has been exceeded. The cause of the failure is likely to be an issue with SDRd or Shelfmgr - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.

Recommended Action    The Bundle Manager process has exited and will be restarted, so no action is needed. Check that the board (EEPROM etc.) is correctly programmed since this is the source of the MAC address information and therefore one possible cause of the problem.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_SCHED Unable to send update for [chars] and unable to schedule retry: [chars]

Explanation    A timeout occurred sending an update to a Bundle Manager process on another node. Due to a problem with the retry mechanism, a resend of the message could not be scheduled. The effect of the message will therefore be lost. The impact will depend on the message which was lost.

Recommended Action    Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_SYSTEM_MAC_RESET Existing system MAC address not found in allocation. System MAC address for bundles is being reset

Explanation    After a resync has occurred between Bundle Manager and the MAC allocation process, the MAC address assigned for use as the system MAC has not been found in the addresses allocated to bundle manager. Bundle manager will choose a new MAC address for use for this purpose. A flap will be seen on bundle links running LACP.

Recommended Action    The Bundle Manager process will select a new address automatically, so no further action is needed to resolve this error.

Error Message     
 
    
    
   

%L2-BM-4-ERR_UNREPLICATE Unreplication failed for [chars], when removing member [chars]. Error: [chars]

Explanation    When attempting to unreplicate the bundle from the member interface location, the unreplication operation failed. Some hardware resources may continue to be used for the bundle on the location of the member that was removed. It is also possible that there could be a problem replicating the bundle to that location again if a new member is added.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-LRD_RESYNC Bundle member [chars] is being referenced from a non-existent node [hex]

Explanation    When resyncing with LRd, bundlemgr has unexpectedly found that a bundle member is on a card that no longer exists. The member will be cleaned up.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-5-CHURN Interface [chars] in [chars] [chars] on actor system

Explanation    Churn has either been detected (due to the failure of a link to synchronize soon enough) or the churn state has now cleared.

Recommended Action    If churn has been declared, check that the configuration for the link allows it to aggregate, and fix as appropriate. Things to check for are links which are incompatible with each other, or misconfigurations between the two ends of the link which is reporting churn.

Error Message     
 
    
    
   

%L2-BM-6-DISTRIBUTING [chars] [chars] in Distributing state as part of [chars]

Explanation    This is an informational message reporting that a link has entered or left Distributing state as part of a bundle interface. The link configuration may have just been changed or there may be an operational reason for the event such as a state change or LACP protocol update.

Recommended Action    Nothing, this is not an error.

Error Message     
 
    
    
   

%L2-BM-6-MIN_MAX [chars] is down because the minimum active link threshold ([unsigned int]) is greater than the maximum permitted links ([unsigned int])

Explanation    This is an informational message reporting that a bundle is operationally down because the configuration for minimum active links and maximum active links conflicts. The number of active links required for the bundle to come up is greater than the number of links permitted to be active in the bundle, and there are at least enough links held in standby state for the bundle to come up if the maximum active link criteria were removed.

Recommended Action    If this situation is not intended then either reduce the minimum active link threshold or increase the maximum links permitted in the bundle.

C12000_FR Messages

Error Message     
 
    
    
   

%L2-C12000_FR-3-SUBIF_COUNT FR Subinterface counter is not initialised

Explanation    Initialisation of subinterface counter in the shared memory failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CDP Messages

Error Message     
 
    
    
   

%L2-CDP-3-ERR_CONN Connection error on [chars]([pointer]): [chars]

Explanation    An error occurred on one of the event connections managed by CDP which CDP could not recover automatically.

Recommended Action    Try restarting CDP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_ATTR_REGISTRATION Unable to register for duplex change notifications: [chars]

Explanation    CDP registration for duplex change notifications failed. This means that duplex information will be missing from outgoing CDP packets

Recommended Action    Try restarting CDP ('proc restart cdp location location'). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_ADD Failed to add the CDP capsulation to interface [chars]: [chars]

Explanation    CDP could not install the CDP capsulation on the specified interface and hence it is not possible for CDP to send or receive any packets on this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_REMOVE Failed to remove the CDP capsulation on interface [chars]: [chars]

Explanation    CDP could not uninstall the CDP capsulation on the specified interface and hence CDP may be in an inconsistent state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_MTU_REGISTER Failed to register for MTU size changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for MTU size changes on this particular interface. This may cause problems sending CDP packets.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_STATE_REGISTER Failed to register for state changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for state changes on this particular interface. This means CDP will be unable to track the state of the interface. CDP functionality may be impaired.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_INIT Initialisation of CDP on interface [chars] failed: [chars].

Explanation    CDP is unable to run on the specified interface. It is likely that this is due to a lack of available resources.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Configuring 'cdp disable', 'cdp enable' on the interface, or restarting CDP on the affected node may recover the situation.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_STATS No CDP protocol statistics can be collected on [chars]: [chars]

Explanation    It was not possible to register for stats collection on the specified interface. The entry in the 'show interface name accounting' command is likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location node proc restart statsd_server location node If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_ADDRESS_SCAN [chars]: Failed to scan the IPv4 addresses for this interface: [chars]. This means that IPv4 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv4 addresses on this interface has failed. This means that IPv4 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv4 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv4_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_REGISTRATION Unable to register for IPv4 address notifications: [chars]. This means that IPv4 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv4 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv4 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv4_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_ADDRESS_SCAN [chars]: Failed to scan the IPv6 addresses for this interface: [chars]. This means that IPv6 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv6 addresses on this interface has failed. This means that IPv6 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv6 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv6_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_REGISTRATION Unable to register for IPv6 address notifications: [chars]. This means that IPv6 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv6 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv6 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location location of failure or proc restart ipv6_ma location location of failure

Error Message     
 
    
    
   

%L2-CDP-3-ERR_STATS No per-interface CDP protocol statistics can be collected: [chars]

Explanation    It was not possible for CDP to register for per-interface CDP protocol stats collection. The entries in the 'show interface accounting' command are likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location node proc restart statsd_server location node If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-STALE_TLV On [chars] the [chars] TLV is not up to date: [chars]

Explanation    CDP received a notification to update a TLV that it sends but failed to do so due to the error given. The information stored by CDP is now out of date.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-DUPLEX_MISMATCH Duplex mismatch discovered on [chars] ([chars]), with [chars] [chars] ([chars]).

Explanation    CDP discovered mismatching duplex configuration on neighboring interfaces.

Recommended Action    Configure the interfaces with the same duplex (full or half).

Error Message     
 
    
    
   

%L2-CDP-4-ERR_MULTICAST_ADDR_SET Error setting up the CDP multicast address on [chars] (media [chars]): [chars]

Explanation    The driver returned an error while setting up the CDP multicast address. It is possible that CDP packets will be dropped and not reach the CDP process.

Recommended Action    If CDP packet loss is seen then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-ERR_TABLE_RESIZE Not enough memory to clear and resize the CDP table

Explanation    CDP ran out of memory when trying to resize the CDP hash table.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. CDP will try and continue to use the previous CDP table.

Error Message     
 
    
    
   

%L2-CDP-4-NEIGHBOR_LIMIT The CDP cache on this node is full. It contains [dec] neighbor entries

Explanation    The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defend against DoS attacks.

Recommended Action    Check the existing CDP neighbors for bogus entries, CDP may be the victim of an attempted DoS attack. The 'clear cdp table' command can be used if CDP neighbor entries need removing.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA CDP did not find any recognized media to run over

Explanation    CDP failed to initialize the media module because it could not find any media that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    If there are no interfaces on this node with a media type that CDP is expected to run on then this could be a normal condition. If it is expected that CDP should run on the type of interfaces on this node then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA_DRIVERS CDP did not find any recognized media drivers

Explanation    CDP failed to initialize the media module because it could not find any media drivers that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    There are no media drivers for the interfaces on this node. If CDP does not support the interface types on this node then this could be a normal situation Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_INIT Initialization warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during the initialization of CDP. CDP will restart and this should resolve the problem.

Recommended Action    CDP will try to recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_TERM Termination warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during CDP's termination. In this situation CDP should recover automatically.

Recommended Action    CDP should recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-6-DELETED_NEIGHBOR CDP Neighbour [chars] on interface [chars] has been deleted, remote interface [chars]

Explanation    An entry has been removed from the CDP neighbors table. Notification of deleted CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-CDP-6-NEW_NEIGHBOR New CDP neighbor [chars] detected on interface [chars], remote interface [chars]

Explanation    A new entry has been added to the CDP neighbors table. Notification of new CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

CEMA Messages

Error Message     
 
    
    
   

%L2-CEMA-3-FATAL_ERR CEMA Fatal Error: [chars]

Explanation    An internal fatal error was detected in CEMA module operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CEMA-3-MISMATCH_ERR CEMA Mismatch Error: [chars]

Explanation    A process on the line card that manages a SPA was restarted. As a part of restart, a mismatch was detected between user specified configuration and the actual configuration of SPA hardware.

Recommended Action    The mismatch can be service affecting in certain cases. Please check if the entity specified in the error log and all it's children are functioning correctly. Contact Cisco TAC for further assistance.

Error Message     
 
    
    
   

%L2-CEMA-4-GEN_ERR CEMA Internal Error: [chars]

Explanation    An internal error was detected in CEMA module operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CFMMIB Messages

Error Message     
 
    
    
   

%L2-CFMMIB-3-NO_DEBUG Unable to register for DOT1AG MIB debug. No further debugging will occur: [chars]

Explanation    In the initialisation of the DOT1AG MIB DLL an error occurred whilst attempting to register for debugging. Consequently there will be no debug output from the DOT1AG MIB DLL.

Recommended Action    Continue working with the DOT1AG MIB DLL without any debugging taking place or restart the DLL such that during initialisation there is another attempt register for debugging.

Error Message     
 
    
    
   

%L2-CFMMIB-3-NO_TRAP Unable to register for SNMP traps. Traps will not be sent regardless of trap events occurring: [chars]

Explanation    In the initialisation of the DOT1AG MIB DLL an error occurred whilst trying to register a callback function for the enabling of SNMP traps. Alternatively whilst trying to enable traps there was a failure in binding to SysDB for trap notifications.

Recommended Action    Continue working with the DOT1AG MIB DLL without any the ability to send traps when events occur or restart the DLL such that there is another attempt to register for traps.

CHDLC_EA Messages

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC EA process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The cHDLC EA process will restart

Explanation    A failure occured during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-6-ERR_IMP_MULTIPLE_NTFCNS CH[hex]: Multiple [chars] notifications received in a single batch from improxy

Explanation    A batch from IMProxy contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC EA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLC_MA Messages

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_IIR_BDL_OP The cHDLC MA failed to process a bundle IIR [chars] message on CH[hex], error: [chars]

Explanation    The chdlc_ma process failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the basecaps is out of step with the bundle configuration.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_INTF_UP_DOWN An error has occured resulting in the interface state being UP, and the line state being DOWN on interface CH[hex]. Because keepalives are disabled the line will never come up. The situation may be resolved by shutting and no shutting the interface, or enabling keepalives.

Explanation    If keepalives are disabled and certain errors occur then the interface and line state can end up being out of step. Without keepalives enabled, SLARP has no way to recover by discovering the correct line state, so user intervention is required for a chance of recovery.

Recommended Action    shut and then no shut the problematic interface, or enable keepalives on the interface.

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_SYSMGR_SOCK_FEAT_START Startup of the cHDLC Socket feature has unexpectedly failed: [chars]

Explanation    The cHDLC socket feature unexpectedly failed to be started by sysmgr. This may mean that processes which use cHDLC sockets to send and receive packets will be unable to do so, and may not be working correctly. Symptoms would include loss of SLARP keepalive packets causing the line state to go down, loss of CDP packets and loss of LACP packets on cHDLC encapsulated interfaces.

Recommended Action    The problem can be fixed by manually starting the cHDLC Socket server process on the affected node using the command 'process start chdlc_socket location location'. The command 'show process chdlc_socket location location' will indicate the state of the process. Once the socket server process is running, no further action is required.

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC MA process will restart

Explanation    An error occured in the event loop.The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The process will restart

Explanation    A failure occured during the initialization of the process. The cHDLC MA process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-6-ERR_IM_MULTIPLE_NTFCNS CH[hex]: Multiple [chars] notifications received in a single batch from Interface Manager

Explanation    A batch from Interface Manager contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC MA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLC_SOCK Messages

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC socket server process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_INIT Failure during intialisation of the chdlc_socket process - specifically [chars]. Error: [chars]. The process will restart

Explanation    A failure occurred during the initialisation of the cHDLC socket process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_PAKMAN_CORRUPTION Unable to handle pakman corruption error: [chars]. chdlc_socket process restarting

Explanation    A packet manager corruption has been reported and the cHDLC Socket process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.

CHDLCDLL Messages

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_DEBUG_REGISTER Could not register for debug events : [chars]

Explanation    There was an error registering the cHDLC Netio debug with the debug library. No debug will be available for the cHDLC Netio DLLs.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_PKT_ENCAP Encapsulation of HDLC packet failed. Packet type-code [hex]

Explanation    The encapsulation of an HDLC packet failed for the network protocol with the ethernet type code specified. The packet has been dropped.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_TRACE_REGISTER Could not register with tracing infrastructure: [chars]

Explanation    An attempt to register with the tracing infrastructure failed. This will mean that tracing for the cHDLC Netio DLLs will not be available.

Recommended Action    *SUPPORT*

CHIPs Messages

Error Message     
 
    
    
   

%L2-CHIPs-2-error [chars]

Explanation    A high severity error has occurred in PLIM FPGA. This might result in the PLIM being reset.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

COMMS Messages

Error Message     
 
    
    
   

%L2-COMMS-3-MSG_DROPPED Unexpected error has lead to an incoming message being dropped: [chars]

Explanation    An incoming control message could not be fully processed due to an unexpected error.

Recommended Action    Restarting the process in question should result in a full resync of all data. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-MY_ID_MISMATCH Checkpoint data for this connection (id %hu) has invalid id (%hu)

Explanation    The Checkpoint table contained unexpected data. This is unexpected, and could indicate memory corruption of some sort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-MY_SAVE_FAILED Failed to save Checkpoint sequence information for connection [chars]

Explanation    The client failed to save its own sequence data to Checkpoint. If the process restarts before the save is successfully retried, remote clients may get out of sync, and data loss could occur.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-3-SAVE_FAILED Failed to save Checkpoint entry [hex]/[hex] on connection [chars]

Explanation    The client failed to save data to Checkpoint. If the process restarts before the save can be retried, then data loss could occur.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-COMMS-4-DUPLICATE_ENTRY Duplicate Checkpoint entry for ID %hu on node [hex]

Explanation    The Checkpoint table contained a duplicate entry. This is unexpected, and likely indicates a software fault.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

d1qnetio Messages

Error Message     
 
    
    
   

%L2-d1qnetio-3-CHAIN_BUILDER_FAILED The chain build function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to set up an interface. Software forwarding VLAN functionality on the affected node may be impaired.

Recommended Action    It may help to restart the VLAN EA process on the affected node, with process restart vlan_ea location [location]. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-IDB_NOT_FOUND The Netio IDB associated with handle [hex] could not be found

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to process a message sent to a particular interface because the interface does not exist in NetIO. Software forwarding VLAN functionality on the affected interface may be impaired. The interface can be determined from its handle with show im chains ifhandle [handle].

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-REGISTRY_CREATION_FAILED Unable to create the protocol registries during capsulation initialization

Explanation    The 802.1Q NetIO component could not necessary data structures during its initialization. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-SUBBLOCK_REG_FAILED 802.1Q Netio failed to register the dot1q_ether subblock (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to initialise on the specified node. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-TRACE_INIT_ERROR A error occurred during trace initialization, err: [chars]

Explanation    The 802.1Q NetIO component encoutered an error during trace buffer initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-CHAIN_UNBUILDER_FAILED The chain unbuild function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up an interface. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEBUG_INIT_ERROR An error occurred during debug initialization (error: [chars])

Explanation    The 802.1Q NetIO component encoutered an error during debug initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEVCTL_NOT_SUP Unsupported NetIO devctl code ([dec]) received

Explanation    The 802.1Q NetIO component received an unexpected message. The message has been ignored. This may indicate that there is a version mismatch among the VLAN components.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-TERM_FAILED 802.1Q NetIO termination failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DI Messages

Error Message     
 
    
    
   

%L2-DI-3-CHANNELCREATE unable to create channel [chars] (Error code [int])

Explanation    Process failed to create communication channel and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-CHKPT unable to create checkpoint service.

Explanation    Process failed to create checkpoint service and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-COMMAND Three command line parameters required: depository_id promid (0/1/2/3)

Explanation    Process received wrong third command line parameter and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-COMMAND3 Third command line parameter is [unsigned long int].It must be 0/1/2/3.

Explanation    Process received wrong third command line parameter and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-CONNECTION Unable to connect to channel [chars] (Error code [int])

Explanation    Process failed to connect to communication channel and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DESTINSANE Data structure destination organizer [chars] is inconsistent for destination [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DESTORG unable to create destination organizer.

Explanation    Process failed to create destination organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DIDORG unable to create DID organizer.

Explanation    Process failed to create DID organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLABSENT Driver DLL [chars] is absent on the platform.

Explanation    A specific driver DLL is required to run certain hardware detected.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLORG unable to create DLL organizer.

Explanation    Process failed to create DLL organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLSYMMISSING Driver DLL [chars] has missing symbol [chars].

Explanation    A specific driver DLL is not correct.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-ENTRY One of the drivers unable to init.

Explanation    Process unable to init one of the drivers and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-ERRORG unable to create error organizer.

Explanation    Process failed to create error organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVE Failed to init event manager event.

Explanation    Process failed to create event manager event and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVELOOP IM notify event manager loop exited (Error no equals [unsigned long int]).

Explanation    Process terminated event manager loop and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVEMGR Failed to create event manager.

Explanation    Process failed to create event manager and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INCONSISTINSTHASH Data structure Instance Hash is inconsistent for instance id [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INCONSISTRSRCHASH Data structure Resource Hash is inconsistent for resource id [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INSTHASH unable to create instance hash.

Explanation    Process failed to create instance hash and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INSTSTORE unable to create instance persistence store.

Explanation    Process failed to create instance persistence store and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INTORG unable to create interrupt organizer.

Explanation    Process failed to create interrupt organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MAINLINE Unable to create mainline ipc server.

Explanation    Process unable to create mainline ipc server and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MUTEXINIT Mutex initialization error [chars] (Error code [int])

Explanation    Process failed to initialize a mutex and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MUTEXLOCKFAIL [chars] operation failed in [chars]; reason [chars]

Explanation    DI failed to lock the packet mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DI-3-NETIOEST NetIO failed to connect to driver_infra_partner and exiting..

Explanation    The initial set up between two driver processes failed. NetIO exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-OUTMEM malloc ([unsigned long int] bytes) from::[chars] failed.

Explanation    Process failed to allocate run-time memory and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-PEERSTORE unable to create peer persistence store.

Explanation    Process failed to create peer persistence store and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOMISSING No installed software to match Hardware in slot [unsigned long int] (PROMID [unsigned long int]).

Explanation    Report missing driver registration.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOMISSING1 No installed software to match Hardware in I/O slot in route-processor [unsigned long int] (PROMID [unsigned long int]).

Explanation    Report missing driver registration.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOORG unable to create registration organizer.

Explanation    Process failed to create registration organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-RESIDORG unable to create RESID organizer.

Explanation    Process failed to create RESID organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-RESOURCEHASH unable to create resource hash.

Explanation    Process failed to create resource hash and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-SHMWIN failed to reserve the shmwin VM region.

Explanation    Process failed to reserve the shmwin VM region and hence exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-STARTCHKPT unable to start checkpoint service.

Explanation    Process failed to start checkpoint service and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-STARTDESTORG unable to start destination organizer.

Explanation    Process failed to start destination organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-SYNHORG unable to create synchronizer organizer.

Explanation    Process failed to create synchronizer organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-THREADCREATE Unable to create thread [chars] (Error code [int])

Explanation    Process failed to create thread and hence terminating.

Recommended Action    'No action is required.'

DIV2_DM Messages

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INFO driver manager: service degrading error, reason equals [chars]

Explanation    Driver manager encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INIT Driver manager: init. error encountered, reason equals [chars]

Explanation    Driver manager encountered an error and is not able recover frm it. A reason text will be supplied. Call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-NO_MEM Driver manager: memory allocation error for [dec] bytes

Explanation    Driver manager encountered a fatal memory allocation error

Recommended Action    Reduce other system activity (e.g. by killing non-essential processes) to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

DRIVERS_UTIL Messages

Error Message     
 
    
    
   

%L2-DRIVERS_UTIL-3-TUPLE_READ_ERROR [chars]: Tuple read failed with error [hex] [chars]

Explanation    An error occured when trying to read the tuple from sysdb.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

DWDM Messages

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL dwdm: fatal error encountered, reason equals [chars]

Explanation    dwdm encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL_2 dwdm: fatal error encountered, reason equals [chars], errno equals [dec]

Explanation    dwdm code encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-INFO dwdm: service degrading error, reason equals [chars]

Explanation    The dwdm encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-NOT_YET_IMPLEMENTED dwdm: this function [chars] is not yet implemented

Explanation    dwdm, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

E3EGRESSQ Messages

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_MEM_ALLOC Failed to allocate [dec] bytes from [chars] ([chars])

Explanation    The process failed to allocate memory. Most likely, all system memory has been allocated already.

Recommended Action    Verify that the card has at least the minimum supported memory configuration. Use the 'show memory' and 'show processes memory location' commands to identify what processes use the memory. If memory usage for a process seems abnormal, restarting the process using the command 'process restart' could be a workaround. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_THREAD_MUTEX_LOCK Failed to lock mutex

Explanation    The process failed to obtain a software mutex lock. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-ERR_THREAD_MUTEX_UNLOCK Failed to unlock mutex

Explanation    The process failed to obtain a software mutex unlock. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-MEM_MAP [chars] (size [hex] addr [hex]) - [chars]

Explanation    The process could not map the egress asic SDRAM into its memory space.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The egress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_ALLOC_SHMWIN Failed to open shared memory window [chars] ([chars])

Explanation    The process failed to open the specified shared memory window. This problem can be caused by a lack of system memory.

Recommended Action    Verify that the card has at least the minimum supported memory configuration. Use the 'show memory' and 'show processes memory location' commands to identify what processes use the memory. If memory usage for a process seems abnormal, restarting the process using the command 'process restart' could be a workaround.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_FREE Failed to free [chars] ([chars])

Explanation    The process failed to free memory. This is likely a symptom of software corruption. The system may be in an unstable condition. The software failed to free memory, and this can eventually lead to an out-of-memory condition.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MEM_MQS_COUNTER_THR_EXCEEDED MQS counter utilization [dec] exceeds the high threshold of [dec]

Explanation    The multicast counter utilization has exceeded the high threshold. This may impact the delay and/or jitter of multciast traffic egressing out of this line card. The maximum counters available are 2048.

Recommended Action    Reduce the multicast traffic rate sent to this line card.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MUTEX_INIT Failed to [chars] ([chars])

Explanation    The process failed to initialize a software mutex. Software mutex are used to protect certain operations from being executed simultaneously by concurrent processes. This indicates a software error which could lead to eventual data corruption and loss of traffic.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_MUTEX_REVIVE Failed to register for mutex revival ([chars])

Explanation    The process failed to register for mutex revival. In the event of a software error where another process would crash while holding a shared mutex, this process would not self-recover. This warning does not cause any degradation in the router operation. The warning simply means that a particular error recovery mechanism will not be effective.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-ERR_PLATFORM_INFO Failed to obtain platform info for [chars] ([chars])

Explanation    The process failed to obtain information on the specified shared memory window. This will prevent proper initialization and operation multicast feature. This indicates a software error condition.

Recommended Action    Reload the linecard. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E3EGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3EGRESSQ-6-ERR_MEM_MQS_COUNTER_THR_NORMAL MQS counter utilization [dec] within the low threshold of [dec]

Explanation    The multicast counter utilization has eased off to below the low threshold.

Recommended Action    No action required.

E3INGRESSQ Messages

Error Message     
 
    
    
   

%L2-E3INGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The ingress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E3INGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E3INGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

E5EGRESSQ Messages

Error Message     
 
    
    
   

%L2-E5EGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The egress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-ERR_MEM_MQS_COUNTER_THR_EXCEEDED MQS counter utilization [dec] exceeds the high threshold of [dec]

Explanation    The multicast counter utilization has exceeded the high threshold. This may impact the delay and/or jitter of multciast traffic egressing out of this line card. The maximum counters available are 16384.

Recommended Action    Reduce the multicast traffic rate sent to this line card.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-ERROR [chars]: error [hex]

Explanation    The e5 egress queue driver encountered an internal error. The router may/may not continue to function normally.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E5EGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5EGRESSQ-6-ERR_MEM_MQS_COUNTER_THR_NORMAL MQS counter utilization [dec] within the low threshold of [dec]

Explanation    The multicast counter utilization has eased off to below the low threshold.

Recommended Action    No action required.

E5INGRESSQ Messages

Error Message     
 
    
    
   

%L2-E5INGRESSQ-3-RECONFIG [chars]: error [hex]

Explanation    The ingress queueing asic was reset, but could not be reconfigured. This may result in partial or complete loss of functionality of the asic.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-E5INGRESSQ-4-INTERRUPT [chars]: reg [hex]

Explanation    The E5INGRESSQ asic experienced an interrupt, and will be reset. After reset, normal operation should resume.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EGRESSQ_HW_DLL Messages

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-ENQ_PKT_LOGIC_ERROR Sharq ENQ packet logic error occurred, shq_enq_reg_debug_mux [hex]

Explanation    Egress Queue Manager encountered a ENQ packet logic error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FAIL_TO_GET_BP_MAP_FROM_PLIM_AISC Failed to get backpressure map from Plim ASIC [dec]. reason [chars]

Explanation    Sharq driver invoke Plim ASIC dll to retrieve the per port backpressure map but failed.

Recommended Action    Please check Plim ASIC and related driver process status, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FCRAM_BIST_FAILURE FCRAM BIST failed, channel: [dec], count: [dec], error_addr: [hex]

Explanation    Egress Queue Manager encountered a FCRAM BIST failure error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-FORWARD_PACKET_TO_UNALLOCATED_QUEUE Forward packets sent to unallocated egress queue [dec]. (queue size [dec] bytes)

Explanation    Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active, or asic reset or linecard reload.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-HW_ERROR [chars]

Explanation    Egress Queue Manager encountered a HW error. This is a severe error and ASIC will be reset by the driver.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-NON_ZERO_Q0_COUNTER EgressQ detected packets sent to Illegal queue (counter value [hex])

Explanation    Egressq driver detected that packets are sent to Q0, which is invalid queue.

Recommended Action    If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-QUEUE_STUCK EgressQ Stuck condition detected (PLIM link [dec], Port [dec], Group [dec], Queue [dec])

Explanation    Egressq driver detects the queue stuck condition (CSCsj48554). There is no packet output from one or more of the PLIM links and the queue length for related queue(s) is building up.

Recommended Action    By default, driver will perform the asic soft reset after detecting queue stuck condition. If this message appears more than once in short period, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-SBE_THRESHOLD_EXCEED Single Bit Error rate exceeded configured high threshold value: [chars]

Explanation    Egressq SBE rate has exceeded the configured high threshold value. This is a self healing error condition.

Recommended Action    No action is required. It is a self healing error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-3-UNALLOCATED_QUEUE_NOT_EMPTY Packets sent to unallocated egress queue [dec]. (queue size [dec] bytes)

Explanation    Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active. This situation should normally not happen, but may possibly happen during transient conditions when egress queue information is being updated (for e.g. on SPA OIR). During this brief time period, one or few packets may be sent to an incorrect queue.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_EVM_FAIL EVM error : [chars] reason : [chars]

Explanation    An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to uncompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ_HW_DLL-7-ERR_LWM_FAIL LWM message send failed: [chars] reason: [chars]

Explanation    An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EGRESSQ Messages

Error Message     
 
    
    
   

%L2-EGRESSQ-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    System failed to allocate memory. It's likely that the system is running low on memory. Following are some reasons: 1) Failed to allocate memory for Egressq client add. 2) Failed to allocate memory for Egressq mapping table. 3) Failed to allocate memory for Queue leaky bucket limit table Memory. 4) Failed to allocate memory for Queue leaky bucket limit table memory. 5) Failed to allocate memory for Group leaky bucket limit table memory. 6) Failed to allocate memory for Group leaky bucket limit table memory. 7) Failed to allocate memory for Port leaky bucket limit table memory. 8) Failed to allocate memory for PLIM Asic back pressure table memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-FCRAM_BIST_FAILURE FCRAM BIST failed, channel: [dec], count: [dec], error_addr: [hex]

Explanation    Egress Queue Manager encountered a FCRAM BIST failure error. Possible cause for this error condition is a faulty hardware.

Recommended Action    No action is required. Process will be automatically restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-HW_ERROR [chars]

Explanation    Egress Queue Manager encountered a HW error. This is a severe error and ASIC will be reset by the driver.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-SBE_THRESHOLD_EXCEED Single Bit Error rate exceeded configured high threshold value: [chars]

Explanation    Egressq SBE rate has exceeded the configured high threshold value. This is a self healing error condition.

Recommended Action    No action is required. It is a self healing error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-3-UNALLOCATED_QUEUE_NOT_EMPTY Packets sent to unallocated egress queue [dec]. (queue size [dec] bytes)

Explanation    Egressq driver detected that packets were sent to an Egressq queue which is unallocated. These packets will not be serviced and will remain in the queue until this queue is allocated and becomes active. This situation should normally not happen, but may possibly happen during transient conditions when egress queue information is being updated (for e.g. on SPA OIR). During this brief time period, one or few packets may be sent to an incorrect queue.

Recommended Action    If this message appears more than once in response to the specific action taken or if the message indicates a large number of bytes (more than 10MB) in an unallocated queue(s), Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_CLIENT_REG Client registration failed: [chars] reason: [chars]

Explanation    An internal error was detected while clients are registering to Egressq process.

Recommended Action    No action is required. Clients will automatically retry to connect to Egressq. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_CLIENT_REG Client registration failed: [chars] reason: [chars]

Explanation    An internal error was detected while clients are registering to Egressq process.

Recommended Action    No action is required. Clients will automatically retry to connect to Egressq. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_EVM_FAIL EVM error : [chars] reason : [chars]

Explanation    An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_EVM_FAIL EVM error : [chars] reason : [chars]

Explanation    An internal error was detected when trying to create EVM connection. It can fail during following scenarios: 1) EDM registration/connect/notify. 2) BAG's rule registration failed.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to uncompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_INTERNAL Internal error : [chars] reason : [chars]

Explanation    An internal error was detected. There are several scenarios which can cause this error condition. Error message describes the cause. Some of these error conditions are serious and result in driver process restart, e.g. ASIC Init/remap, enable/disable failure. Following are some of the reasons for this internal error: 1) Obsolete API usage, it can be caused due to uncompatible component installed in the system. 2) Interface creation failed due to egressq port creation failure. 3) Can't map Interface handle to egressq port, it could be because of: a) Invalid interface handle passed. b) Internal interface to port mapping table is corrupted. 4) Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted. 5) Egressq Group/Queue creation/ deletion failed. 6) ASIC enable /disable failed.

Recommended Action    No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_LWM_FAIL LWM message send failed: [chars] reason: [chars]

Explanation    An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EGRESSQ-7-ERR_LWM_FAIL LWM message send failed: [chars] reason: [chars]

Explanation    An internal error was detected when trying to send a LWM message. There are several scenarios which can cause this error condition. Error message describes the exact cause.

Recommended Action    No action is required. The process retries automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ELO_COMMON Messages

Error Message     
 
    
    
   

%L2-ELO_COMMON-3-SYSMGR_FAIL Unable to signal that process is exiting: [chars]

Explanation    The process has failed to inform System Manager that it is shutting down. The process will exit anyway, but it is possible that any configuration entered will not cause SysMgr to restart the process. In this case, a timeout will occur when committing configuration, and the config will fail to apply.

Recommended Action    If configuration fails to apply, recommitting it should correct the issue. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-EVM_CLEANUP_FAILED Failed to cleanup Event Manager: [chars]

Explanation    Whilst exiting, an error was encountered cleaning up the Event Manager. This process will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-PROC_READY_FAILED Unable to signal process ready: [chars]

Explanation    The process failed to inform System Manager that it is ready, and will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-VERIFY_CLEANUP_FAILED Failed to cleanup common verification module: [chars]

Explanation    Whilst exiting, an error was encountered cleaning up a common module. The process will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO_COMMON-4-VERIFY_INIT_FAILED Failed to initialize common verification module: [chars]

Explanation    The process has failed to initialize a module, and will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ELO Messages

Error Message     
 
    
    
   

%L2-ELO-3-BAD_CONFIG Invalid configuration values applied: [chars]

Explanation    Invalid configuration has been incorrectly applied. This can potentially indicate a recent change in acceptable configuration values, or an internal fault.

Recommended Action    Check that all configuration is within the acceptable ranges for the current version of the software and the installed hardware. If the error persists, and all values are within range, copy and save this message, and call your technical support representative for assistance.

Error Message     
 
    
    
   

%L2-ELO-3-COULD_NOT_GET_NODEID Ethernet Link OAM Daemon failed to determine the node it is running on: [chars]

Explanation    The Ethernet Link OAM Daemon failed to determine the ID of the node on which it is running. It will exit, and should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-COULD_NOT_REMOVE_CAPS Failed to remove PFI caps from interface 'CH[hex]': [chars]

Explanation    The Ethernet Link OAM Daemon failed to clean up a caps entry in PFI for the named interface. This error is not fatal in itself, although it may prevent OAM from being re-enabled on the given interface until the problem is resolved.

Recommended Action    Read the error message, and attempt to resolve any issue that may have caused it. Restarting the Ethernet Link OAM Daemon will then allow it to resynchronise with PFI and cleanup the dangling caps. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-DAEMON_INIT_FAILED Ethernet Link OAM Daemon failed to initialize: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize correctly, and will now exit. It should be restarted by SysMgr.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-DEBUG_INIT_FAILED Ethernet Link OAM failed to initialize debug library: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its debug, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-EDM_INIT_FAILED Ethernet Link OAM Daemon failed to initialize EDM module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its Data Manager module, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-ERRDIS_FAILED CH[hex]: failed to Error-Disable the port: [chars]

Explanation    The port should have been Error Disabled, but an unexpected error has prevented it from being shut down. The port is still up, and will not be disabled.

Recommended Action    Shutdown the port manually if it is still desirable to bring it down. Otherwise, no action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-EXITING Ethernet Link OAM Daemon failed to process events: [chars]

Explanation    The Ethernet Link OAM Daemon failed to process an event, and will now exit. It should be restarted by SysMgr, allowing it to resynchronise its internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-IDB_INIT_FAILED Ethernet Link OAM failed to initialize interface database: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its interface database, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-IW_INIT_FAILED Ethernet Link OAM Daemon failed to initialize inter-working module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its inter-working module and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-LOOPBACK_SET_FAILED [chars]: Failed to change Loopback state in the platform: [chars]

Explanation    An attempt to change the Loopback state of an interface failed. This will either be in response to a local command to change the remote peer's Loopback state, or a command on the remote peer to put this interface in slave loopback mode.

Recommended Action    Retry the Loopback operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-PFI_CLEANUP_FAILED_NOMEM Failed to allocate sufficient memory to clean up OAM data from interfaces within PFI

Explanation    Insuffient memory is available to perform a clean up operation. PFI data structures have not been correctly cleaned up.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Once this is done, restart the Ethernet Link OAM daemon in order to force a resynchronisation, which will clean up the dangling data structures.

Error Message     
 
    
    
   

%L2-ELO-3-PFI_INIT_FAILED Ethernet Link OAM Daemon failed to initialize PFI module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its PFI module, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-PLATFORM_INIT_FAILED Ethernet Link OAM Daemon failed to initialize platform library: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its platform library, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-3-PROTO_INIT_FAILED Ethernet Link OAM Daemon failed to initialize Protocol module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to initialize its Protocol module, and will now exit. It should be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-CHKPT_SAVE_FAILED CH[hex]: failed to save checkpoint entry: [chars]

Explanation    The Ethernet Link OAM Daemon failed to save the checkpoint entry for the given interface. Although this error is not immediately fatal, information will be lost if the process restarts before successfully saving its checkpoint data.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-DEBUG_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup debug module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its debugging module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-EDM_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup EDM module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its Data Manager module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-IDB_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup interface database: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its interface database. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-INVALID_PLATFORM_EVENT_IFH Platform event triggered on interface 'CH[hex]' for which OAM is not configured

Explanation    The platform has triggered an event for an interface that has not been configured for Ethernet Link OAM. This indicates a bug in the software.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-INVALID_PLATFORM_EVENT_TYPE An unknown event of type '[hex]' has been triggered by the platform

Explanation    The platform has triggered an event that is not recognized. This is most likely due to a bug in the platform layers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-IW_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup inter-working module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its inter-working module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-LOOPBACK_FAILED Etherenet Link OAM Daemon has failed to initiate loopback mode with a remote peer

Explanation    The Ethernet Link OAM Damon has failed to initiate loopback mode. Loopback mode is unavailable until the issue is resolved.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-NOT_IN_LOOPBACK [chars]: Unable to exit Slave Loopback mode as requested, because we're not currently in loopback mode

Explanation    A requset has been made by the remote peer to stop Slave loopback mode. However, we are not currently in Slave loopback mode. This indicates that the remote peer is out of sync with our current state.

Recommended Action    Start slave Loopback mode before attempting to stop it.

Error Message     
 
    
    
   

%L2-ELO-4-PFI_ERROR CH[hex]: [chars] notification received from PFI, but interface does not have OAM configured

Explanation    Unexpected updates have been received by the Ethernet Link OAM Daemon regarding interfaces on which OAM is not configured. This indicates that a resync is required between the OAM process and PFI.

Recommended Action    Restart the Ethernet Link OAM Daemon on the affected node. This will force a resync of the state with PFI. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-PFI_MODULE_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup PFI module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its PFI module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-PLATFORM_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup platform module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its platform module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-PROTO_CLEANUP_FAILED Ethernet Link OAM Daemon failed to cleanup Protocol module: [chars]

Explanation    The Ethernet Link OAM Daemon failed to cleanup its protocol module. It will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-SEND_FAILED [chars]: Failed to send a [chars] message: [chars]

Explanation    Failed to send a message out of the given interface. The message has been lost, and will not be delievered to the remote peer.

Recommended Action    Resynchonrisation mechanisms should ensure subsequent messages are correctly sent. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-4-SEND_HEARTBEAT [chars]: failed to send heartbeat Information OAMPDU: [chars]

Explanation    The Ethernet Link OAM Daemon was unable to send a heartbeat Information OAMPDU on the specified interface. If this happens repeatedly, then the OAM session will time out.

Recommended Action    The problem should correct itself, and the next heartbeat message should send successfully. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-6-CPU_STARVED Ethernet Link OAM Daemon has been starved of CPU for [unsigned long long int] ms

Explanation    The Ethernet Link OAM Daemon has been starved of CPU time. As a result, it will not have been able to send out periodic heartbeats regularly, causing OAM sessions to potentially drop. The problem is likely due to unusually high load on the system.

Recommended Action    Identify any potential high CPU users, and reduce their impact. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_CAPABILITIES_CONFLICT [chars]: Configuration conflict

Explanation    Discovery mode cannot complete due to a conflict in the required configuration of the remote peer.

Recommended Action    Ensure that the configuration requirements on this interface match the configuration of the remote OAM peer.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_DISCOVERY_TIMEOUT [chars]: OAM discovery failed to complete in the specified time

Explanation    Discovery mode has been ongoing for the configured timeout, but no suitable response has been received from the remote peer.

Recommended Action    Ensure the remote OAM peer is correctly configured and that the link is up.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_CRITICAL_EVENT [chars]: Remote critical event detected

Explanation    The remote peer has indicated a critical event.

Recommended Action    No specific IOS-XR action needs to be performed.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_DYING_GASP [chars]: Remote dying gasp detected, with reason: [chars]

Explanation    The remote peer has indicated a dying gasp. This means that the remote peer is coming down.

Recommended Action    Restart the remote peer.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_LINK_FAULT [chars]: Remote link fault detected

Explanation    The remote peer has indicated that a link fault has occurred. This indicates a uni-directional link.

Recommended Action    Check the wiring between the two interfaces.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_REMOTE_LOOPBACK [chars]: OAM [chars] loopback has been [chars] on the interface

Explanation    The OAM session has either entered or exited local or remote loopback. If loopback has been entered then traffic flow will be disrupted until it is exited at which point normal functionality will resume.

Recommended Action    None. This is an informational message.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_SESSION_DOWN [chars]: OAM session has gone down

Explanation    The OAM session has ended. Either it has been deconfigured, or no response has been received from the OAM peer in the configured time interval.

Recommended Action    Check that the remote peer is correctly configured still. If it is, then a large number of packets may be being dropped on the link.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_SESSION_UP [chars]: OAM session has come up

Explanation    The OAM session has been fully established, and regular heartbeat messages are being sent and received.

Recommended Action    None. This is an informational message.

Error Message     
 
    
    
   

%L2-ELO-6-INTF_THRESHOLD_BREACHED [chars]: Threshold breached

Explanation    A threshold has been breached in the local hardware. This is an indication of a deteriorating link.

Recommended Action    No specific IOS-XR action needs to be performed.

Error Message     
 
    
    
   

%L2-ELO-6-LOOPBACK_CANCEL [chars]: Cancelling loopback mode as our MAC is lower than the remote MAC

Explanation    An attempt has been made to start loopback mode from both peers simultaneously. As per the IEEE 802.3 OAM specification, this OAM client has cancelled the request as the local MAC address is lower than the remote MAC address.

Recommended Action    Retry the Loopback operation from this peer once the remote loopback session on the remote peer has been terminated.

Error Message     
 
    
    
   

%L2-ELO-6-MISCONFIGURED_INTERFACE The profile configuration from profile '[chars]' cannot be applied as the platform does not support all the configured values: [chars]

Explanation    A profile can be configured that has configuration parameters outside the acceptable range for all interfaces on the router. If that profile is later attached to an interface for which all its values are not supported, this message is generated. The interface will use the default values for any parameter that is out of range.

Recommended Action    Nothing need be done if the default values are acceptable for the invalid parameters. Otherwise, modify the profile to contain only values that are in range for the interfaces to which it is attached, or use an alternate profile for this interface.

Error Message     
 
    
    
   

%L2-ELO-6-MISWIRED [chars]: Mis-wiring detected

Explanation    The Mis-Wiring Detection feature of Ethernet Link OAM has detected a mis-wiring situation. Mis-wiring occurs when the TX wire of an interface is not connected to the same remote interface as the RX wire.

Recommended Action    Check the wiring of the specified interface. By setting the mis-wiring action to 'log', and using the packet debugging facility of Ethernet Link OAM ('debug ethernet oam packets'), the MAC addresses of the source of packets can be used to identify where the links are.

Error Message     
 
    
    
   

%L2-ELO-6-NO_PROFILE Profile '[chars]' is not configured, but has been attached to an interface

Explanation    A profile has been attached to an interface. However, that profile has not yet been configured. Until the named profile is created, the interface will use the default profile configuration.

Recommended Action    Create the specified profile, or remove the configuration associating the profile with the interface.

Error Message     
 
    
    
   

%L2-ELO-6-REMOTE_MASTER_LEFT_LOOPBACK [chars]: Local client in Slave Loopback, and remote Master has abruptly left Loopback mode. Exiting Slave loopback locally

Explanation    While running the link in OAM Loopback mode, with the local peer as the Slave, the Master peer abruptly ended Loopback mode without first informing this peer to end it. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-REMOTE_SLAVE_LEFT_LOOPBACK [chars]: Remote client has abruptly left Slave loopback mode. Exiting loopback state

Explanation    While running the link in OAM Loopback mode, with the local peer as the Master, the Slave peer abruptly ended Loopback mode without being told to do so by this peer. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-UNEXPECTED_LOOPBACK_STATE [chars]: An unexpected multiplexer and parser state have been received from the remote peer.

Explanation    While running the link in OAM Loopback mode the local peer received an unexpected multiplexer and parser state combination from the remote peer. This may indicate a problem with the remote peer.

Recommended Action    No corrective action is required. This peer has exited Loopback mode also, and the link is now back to normal operational status.

Error Message     
 
    
    
   

%L2-ELO-6-UNEXPECTED_STATE A variable response from the remote peer contained invalid state.

Explanation    Whilst parsing a variable response packet an invalid state was found. This could be an indication of a faulty implementation on remote peer.

Recommended Action    No specific IOS-XR action needs to be performed.

ELOGM Messages

Error Message     
 
    
    
   

%L2-ELOGM-4-DEBUG_CLEANUP_FAILED Ethernet Link OAM Global Manager failed to cleanup debug: [chars]

Explanation    Whilst exiting, the Global Manager failed to cleanup the debug module. The process will exit anyway, and no further errors should be seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-DEBUG_INIT_FAILED Ethernet Link OAM Global Manager failed to initialize debug: [chars]

Explanation    During initialization, the Global Manager failed to initialize the debug module and will now exit. It should be restarted by System Manager and resynchronize it's internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-EXITING Ethernet Link OAM Global Manager failed to process events: [chars]

Explanation    The process failed to process incoming events, and will exit. It should be restarted by System Manager and resynchronize its internal state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ELOGM-4-INIT_FAILED Ethernet Link OAM Global Manager failed to initialize: [chars]

Explanation    During initialization, an unexpected error was encountered. The process will exit and be restarted by System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EMA Messages

Error Message     
 
    
    
   

%L2-EMA-4-ERR_ACTIVATE Failure during activation of [chars]. Error: [chars]

Explanation    A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process has exited and restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EMA-4-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EPI Messages

Error Message     
 
    
    
   

%L2-EPI-3-ATTR_NOTIFY_FAILED Failed to notify a client of a change to interface attributes - out of memory

Explanation    The EPI library was unable to notify a client of a change to some interface attributes because it was unable to allocate memory. This may result in the client of the EPI library attempting to send invalid packets.

Recommended Action    This message will be seen as a result of a configuration change if the system is low on memory. Attempt to free up some memory and reapply the configuration change that caused this message to be displayed. If the problem persists, try restarting the process using this library. If this does not help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-INIT_FAILED Failed to initialize, [chars] failed [unsigned int]: [chars]

Explanation    An error was encountered while the EPI library was initializing. The error message contains details about the source of the error.

Recommended Action    The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-PAK_FREE_FAILED Failed to free packet buffer: [chars]

Explanation    An error was encountered while the EPI library was attempting to free a packet buffer. The error message contains details about the source of the error.

Recommended Action    This message should be harmless, but it is possible that there is an inconsistency that may lead to a memory leak. If the problem persists, try restarting the process. If this does not help, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-EPI-3-PKT_OVERFLOW The maximum number of packets being stored for interface: CH[hex] has been exceeded

Explanation    The EPI library has been asked to create a packet for an interface which already has the maximum number of supported packets in storage. EPI has created the packet, but may have difficulty updating packets on this interface in future.

Recommended Action    This message is likely to indicate an internal error in the process that means it is not freeing its old packet information correctly. If the process is not restarted then a future configuration change for the interface in question may not be reflected in the generated packets. Try restarting the process and, if the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETH_OUTPUT Messages

Error Message     
 
    
    
   

%L2-ETH_OUTPUT-3-ERR_NO_MEM Out of memory (failed attempt to reserve [unsigned int] bytes)

Explanation    The Ethernet Output process was not able to allocate the memory that it needed to complete the operation. Ethernet Output process client functionality on the affected node may be reduced until the problem is resolved.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ETHER_NETIO Messages

Error Message     
 
    
    
   

%L2-ETHER_NETIO-4-DEBUG_REG Debug registration failed: [chars]

Explanation    It was not possible for the Ethernet slow path support to initialize its debugging support. Some of the output from debug ether-netio output may be incomplete.

Recommended Action    No action is required.

ether_spa_plugin Messages

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-ERRORRECOVER A Hardware or Software error occurred. Reason : [chars] Automatic Error recovery initiated. No further intervention required.

Explanation    An error occurred in one of the devices, recovery would be attempted. If recovery succeeds no further messages would be logged and no intervention would be required.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-LINK_EVENT Interface TenGige [dec]/[dec]/[dec], [chars]

Explanation    This will log the reason for the link to go down

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-OPTICS_OIR An Optics is [chars] for bay [dec] and port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port either has been inserted or removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-UNSUPPORTED_OPTICS [chars] port [dec] security check failed . Disable

Explanation    An Unsupported Optic Interface Module (OIM) for the specified port has been inserted .

Recommended Action    No action is required.

ETHER Messages

Error Message     
 
    
    
   

%L2-ETHER-3-BDL_IIR_OP_FAILED The basecaps failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the Ether basecaps is out of step with the bundle configuration.

Recommended Action    Restart the ether_caps_partner process in an attempt to recover, or if this fails, detach and re-attach the physical member interface that the error was reported on by unconfiguring and reconfiguring the bundle member id.

Error Message     
 
    
    
   

%L2-ETHER-4-ERR_EVM_EVENT_BLOCK Failure during receipt of message. Error: [chars]

Explanation    A failure occurred handling a message arriving at one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-4-INIT Failure during intialisation of [chars] in a Ether basecaps process. Error: [chars]

Explanation    A failure occurred during the initialisation of one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETHERNET Messages

Error Message     
 
    
    
   

%L2-ETHERNET-3-INTERFACE_INITIAL Failed to initialize interface [chars], due to error: [chars]

Explanation    It was not possible to initialize the physical interface due to a driver error or a system error. The interface's config may not have been restored and the interface will not be usable.

Recommended Action    Restart the driver process that reported the error. If the error is reported again then reloading the linecard may allow it to recover, but it will impact all traffic on that node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MIB_ERROR Unable to fetch requested Etherlike MIB data for interface [hex]: [chars]

Explanation    An error occured while trying to collect MIB data requested by the SNMP infrastructure. The data for which an error was encountered will not be presented in SNMP 'get' request results.

Recommended Action    Such errors are not expected, and probably indicate an out-of-resource condition, or an inconsistency in the system state. Wait for any likely transient root problems to subside, and attempt to repeat the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    Choose a more appropriate MTU to configure on the interface considering the MTU requirements of any L3 protocols that are configured on the interface.

Error Message     
 
    
    
   

%L2-ETHERNET-3-STATE_FSM Port state FSM operation failed [chars] on [chars], due to error: [chars]

Explanation    An operational error occured when handling a port state event in the port state machine, and the internal state may be left in an inconsistent state without user intervention.

Recommended Action    'shutdown' and 'no shutdown' the affected interface, this should allow the state machine to recover its operational state. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-TX_DISABLE Interface [chars], link [chars]forced down due to remote signalling

Explanation    L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise.

Recommended Action    If the remote AC has changed state then this message is expected. If the remote AC hasn't changed state and this condition isn't expected then this may indicate a problem, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-BDL_IIR_OP_FAILED The driver failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the driver is out of step with the bundle configuration.

Recommended Action    Recovery will be attempted automatically. If this error message is seen repeatedly, restart the driver process that is generating the message and it will automatically recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-INITIALIZATION Initialization of the G-Ether library failed, due to error: [chars]

Explanation    A error occurred during the initialization of the common Ethernet driver library.

Recommended Action    The driver process is restarted automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-INTERFACE_CREATE Interface creation failed due to error: [chars]

Explanation    It was not possible to create some or all physical ethernet interfaces due to a driver error or a system error.

Recommended Action    The driver process will attempt to recover automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-6-MAC_ACC_NOT_PROGRAMMED Interface [chars]%s[chars]%s, failed to program some addresses for MAC accounting

Explanation    Some MAC addresses have not been programmed for MAC accounting in the hardware. This means that MAC accounting statistics will not be collected for these MAC addresses. This is most likely due to a lack of hardware resources due to a large number of MAC addresses being programmed for MAC accounting.

Recommended Action    This condition will only affect statistics collection for some MAC addresses on this interface. If the number of MAC accounting addresses programmed, which can be checked using 'show mac-accounting', seems small and this issue is still hit this may indicate a system error, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-6-MTU_NEAR_HW_LIMIT The configured MTU of [unsigned int] on [chars] is close to the H/W limit, and hence large [chars] frames may be dropped as oversized frames

Explanation    The configured MTU is close the maximum frame size allowed on the interface. Hence large 802.1Q or QinQ frames bigger than the maximum frame size supported on the interface may be dropped.

Recommended Action    If 802.1Q or QinQ support is required on the interface, then it is recommended that either the configured interface MTU is reduced by 4 or 8 bytes, or the sub-interface MTU is reduced by 4 or 8 bytes to ensure that all frames are within the H/W limits.

FB_PLIM Messages

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ERROR [chars]: [hex], [chars]

Explanation    An error occurred in 1p OC12-ch-ds1 PLIM process. This may cause features to not work properly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ERROR_NO_RC [chars]

Explanation    An error occurred in 1p OC12-ch-ds1 PLIM process, which might involve exiting the process. Some features may not work if this error is seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-INIT_ERROR [chars]: [hex], [chars]

Explanation    An error occurred initialization of 1p OC12-ch-ds1 PLIM process, which will involve exiting the process and recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ML_ERROR [chars]

Explanation    An error occurred in the 1p OC12-ch-ds1 Multilink platform dependent component. This may cause the multilink feature to not function properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-3-ML_PULSE_ERROR [chars]

Explanation    An error occurred in the 1p OC12-ch-ds1 PLIM multilink pulse message processing. This may cause the multilink feature to not function properly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_PLIM-4-WARNING [chars]: [hex], [chars]

Explanation    This is a warning message in the 1p OC12-ch-ds1 PLIM process to indicate anomolies which are not fatal. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FB_SHIM_ENCAP Messages

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-EINVAL [chars]: [hex], [dec]

Explanation    An invalid input condition detected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-NO_SHIM [chars]: [hex]

Explanation    The SHIM information not found for the interface given.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FB_SHIM_ENCAP-3-UNEXPECTED [chars]: [dec]

Explanation    Unexpected encap type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FE_PLIM Messages

Error Message     
 
    
    
   

%L2-FE_PLIM-4-INVALID_MAC Failed to get MAC address for [chars], Interface assigned random MAC address.

Explanation    PLIM driver was unable to get a MAC address for the interface.

Recommended Action    Check if the process 'shelfmgr' is up and running on the RP. Try to reload the LC to see if that helps. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB_IPV4 Messages

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    Platform IPv4 FIB, adjacency error

Recommended Action    Please collect the console log and following traces: show cef trace loc show cef platform trace [common|ipv4] all loc show adjacency hardware trace loc show bundle trace all loc show im trace loc Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    Platform IPv4 FIB, adjacency error

Recommended Action    Please collect the console log and following traces: show cef trace loc show cef platform trace [common|ipv4] all loc show adjacency hardware trace loc show bundle trace all loc show im trace loc Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ADJ_ERROR [chars] ifh: [hex], [chars]

Explanation    Platform IPv4 FIB, adjacency error

Recommended Action    Please collect the console log and following traces: show cef trace loc show cef platform trace [common|ipv4] all loc show adjacency hardware trace loc show bundle trace all loc show im trace loc Most of the time, these are harmless transient messages, caused by the delay in FIB and AIB processes learning about new interface. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERR_STR [chars], [chars] ([unsigned int])

Explanation    Platform IPv4 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    Platform IPv4 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    Platform IPv4 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-ERROR [chars]

Explanation    Platform IPv4 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv4] all loc ). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV4-3-GEN_ERR FIB IPV4 internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV4-5-RECURSIVE_LOOP FIB IPv4 Recursive loop: [chars]

Explanation    Recursive loop was detected. The route update will be dropped

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB_IPV6 Messages

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO_VERBOSE [chars] [chars] [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO_VERBOSE [chars] [chars] [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERR_INFO_VERBOSE [chars] [chars] [chars] [dec]

Explanation    Platform IPv6 FIB, error information

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    Platform IPv6 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    Platform IPv6 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-ERROR [chars]

Explanation    Platform IPv6 FIB, error

Recommended Action    Please collect the console log, FIB traces (show cef trace loc ), FIB platform trace (show cef platform trace [common|ipv6] all loc ). Also notice if the error message is transient or persistent. If errors persist, report to your technical support representative.

Error Message     
 
    
    
   

%L2-FIB_IPV6-3-GEN_ERR FIB IPV6 internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FIB_IPV6-5-RECURSIVE_LOOP FIB IPv6 Recursive loop: [chars]

Explanation    Recursive loop was detected. The route update will be dropped

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_LMI Messages

Error Message     
 
    
    
   

%L2-FR_LMI-2-INIT LMI failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-CODEP_ERROR Configured values of [chars] and [chars] conflict during application. Changing [chars] to [dec] to maintain consistency

Explanation    LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 equals N393. Somehow SysDB is attempting to apply config which conflicts unreconcilably. The parameter being configured is adjusted to be equal to the other.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-ENCAP Unable to process Frame Relay encapsulation request

Explanation    An error occurred processing a request to set Frame Relay encapsulation on an interface. LMI will not be able to control the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-FSM_T391_EXPIRY FSM in STOPPED state while timer is running: Interface [chars]

Explanation    This indicates that FSM has gone into an error condition. We should not have a valid timer expiry event if the FSM for this particular interface was in STOPPED state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IDB_INIT IDB initialization failure for [chars] - [chars]

Explanation    Interface creation within fr_lmi process failed for the named interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IDB_SEARCH The interface specified by a handle is not one that LMI recognizes as running Frame Relay

Explanation    A call to rt_search failed to return an idb object.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IM_ERR [chars]

Explanation    Error in IM operation. Ex: Connection to IM not getting established, or some IM API errored out.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-INVALID_VC An error occured while inserting the vc_idb into the tree, a invalid vc_idb(ifh [hex], dlci [dec]) exists

Explanation    Dangling VC found. Possible reasons: VC deletion failed in previous attempt or LMI did not get a deletion nfn from IM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-KEEPALIVES An error occurred informing the VC Manager that LMI is [chars] responsible for the line state of an interface: [chars]

Explanation    An error occurred in the VCM call to set the keepalive state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-LINE_STATE An error occurred informing the VC Manager of the line state: [chars]

Explanation    The VC Manager returned an error after receving a request to set the line state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SENDTO An error occurred sending a packet: [chars]

Explanation    The socket call sendto returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SET_DLCI_STATUS An error occurred sending the updated VC states to the VC Manager: [chars]

Explanation    The VC Manager returned an error after receving a request to update VC states.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VC_CREATE Unable to create LMI DLCI [dec]: [chars]

Explanation    LMI was unable to create a VC it needed to function properly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VCM_VC_STATES LMI was unable to send all VC states to the VC Manager

Explanation    An error occurred sending the VC states to the VC Manager. This could have occurred searching LMI's internal database or in the call to the VCM.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-6-CODEP_CHANGE Changing defaulted value of [chars] to [dec] due to configured value of [chars]

Explanation    LMI parameters N392 and N393 are co-dependent - they must obey the rule N392 equals N393. Sometimes when one is changed the other must be changed as well to keep the protocol functioning properly.

Recommended Action    None. This is not an error, just a notification.

FR_UV Messages

Error Message     
 
    
    
   

%L2-FR_UV-3-ERR_ABORT_ENCAP_FAIL [dec] encap aborts failed: The system may now be in an inconsistant state.

Explanation    The FR Uberverifier has detected a misconfiguration. It was not able to cleanup its internal DB while handling encap abort creates.

Recommended Action    The misconfiguration can be corrected by restarting fr_uv process on the specific location on which this error message is seen. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistant state.

Explanation    The FR Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_VCM_EA Messages

Error Message     
 
    
    
   

%L2-FR_VCM_EA-2-INIT FR VCM EA failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The FR VCM EA process initialization failed whilst trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-BATCH_INTERFACE_ERROR Error during messaging: [chars]

Explanation    The FR VCM EA process has detected an error during messaging. Possible memory corruption or out of resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-DATABASE_KEY_MISSING Internal database access error

Explanation    The FR VCM EA process code/data is inconsistent. Possible coding error or data corruption.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-DLCI_MATCH_FAILED Failed DLCI match, err: [chars]

Explanation    The FR VCM EA has a wrong value of the DLCI and is not the same as what the MA sends.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-NO_STATS Failed to initialize FR VCM subinterface stats collection, err: [chars]

Explanation    The FR VCM EA subinterface stats collection initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_VCM Messages

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONFIG_INIT Configuration registration failed: [chars]

Explanation    Unable to register for configuration changes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONNS Connection initialization failed: [chars]

Explanation    Unable to initialize connections to one or more servers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-CONNECT_TO_L2VPN Connect to L2VPN server failed: [chars]

Explanation    FR VCM process on linecard tried to connect to L2VPN server on RP. Connect registration failed. FR L2 sub-interfaces will not be operational on this linecard.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-ENCAPS_TYPE Unable to specify [chars] encaps type for interface [chars]: [chars]

Explanation    The configuration in the NetIO DLL could not be updated, the system may continue with the existing encapsulation type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IDB FR [chars] IDB [chars] failed: [chars]

Explanation    Unexpected error on Interface Descriptor Block

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IM_OP FR [chars] on [chars] failed: [chars]

Explanation    The operation on the named item is not completing successfully when it is expected to, and hence the FR support may be disabled

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-INTF_NOTFOUND FR interface [chars] not found

Explanation    An action has been performed on a FR interface, but FR doesn't have any information about the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-MAIN_IF FR error on main interface [chars]: [chars]

Explanation    Unexpected error on the main interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-PTP_VC FR PVC create (dlci [dec]) on PTP subinterface failed - only one PVC is allowed

Explanation    Point-to-point (PTP) subinterfaces only allow one PVC and an attempt to create a second PVC is being rejected

Recommended Action    Remove the old PVC before creating the replacement, or use a multipoint subinterface instead

Error Message     
 
    
    
   

%L2-FR_VCM-3-SUB_IF FR error on sub-interface [chars]: [chars]

Explanation    Unexpected error on the sub-interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-SYSDB_OP FR SysDB [chars] on [chars] failed: [chars]

Explanation    Unexpected failure performing a SysDB operation.

Recommended Action    Check SysDB is still running, and if not restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_EXISTS FR VC with DLCI [dec] already exists

Explanation    The DLCI is unique per 'main' interface and this dlci is already used

Recommended Action    None.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_NOTFOUND FR VC with DLCI [dec] not found

Explanation    An operation was performed which expected a VC with the specified DLCI to exist, but it doesn't

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

FRMIB Messages

Error Message     
 
    
    
   

%L2-FRMIB-3-SYSDB FR MIB: [chars]: [chars]: [chars]

Explanation    This message indicates the FR MIB library fails to perform a SYSDB operation. *DDTS*

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_EDGE_COMMON Messages

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_ADJ_ERR adj engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in adjacency engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-FWD_EDGE_COMMON-3-EDGE_IP_ERR fib ip engine layer internal error [chars] : [chars]

Explanation    A runtime failure occurred in fib ip engine layer resulting in a failure to provide some system service as indicated in the message text. This is most likely an internal error. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

GATM Messages

Error Message     
 
    
    
   

%L2-GATM-2-ERR [chars] - [dec]: [chars]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_HEX [chars] - [dec]: [chars] ([hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_IFH_STS [chars] - [dec]: [chars] ifh equals [hex] rc equals [hex]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_INT [chars] - [dec]: [chars] ([dec])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STR [chars] - [dec]: [chars] ([chars])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STS [chars] - [dec]: [chars] (rc equals [hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

GDO Messages

Error Message     
 
    
    
   

%L2-GDO-5-L2PORT_FAULT_NOTIFY [chars]

Explanation    ATM SPA GDO L-AIS insertion/removal notification messages

Recommended Action    *NONE*

Error Message     
 
    
    
   

%L2-GDO-7-DEBUG [chars]

Explanation    ATM SPA GDO L-AIS insertion/removal debug messages

Recommended Action    *NONE*

GE_ASIC_PRP3 Messages

Error Message     
 
    
    
   

%L2-GE_ASIC_PRP3-3-INIT_ERR GigE hardware initialization failed. Reason equals [chars], Error Decode equals [chars]

Explanation    The GE hardware managment subsystem encountered an error during initialization. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the the RP's onboard ethernet. %s - indicates the reason for the failure %s - indicates the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt' to verify that the process is up and running. If it is not, try doing 'process restart ge_mgmt' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GE_ASIC_PRP3-3-PKT_ERR GigE hardware packet error. Reason equals [chars]

Explanation    The GE hardware managment subsystem encountered an error during receiving of packets. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the the RP's onboard ethernet. %s - indicates the reason for the failure

Recommended Action    Execute 'show process ge_mgmt' to verify that the process is up and running. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GE_ASIC Messages

Error Message     
 
    
    
   

%L2-GE_ASIC-3-INIT_ERR GigE hardware initialization failed. Reason equals [chars], Error Decode equals [chars]

Explanation    The GE hardware managment subsystem encountered an error during initialization. This process monitors and controls hardware components required for the RP management ethernet port. A failure in this subsystem will disable the the RP's onboard ethernet. %s - indicates the reason for the failure %s - indicates the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt' to verify that the process is up and running. If it is not, try doing 'process restart ge_mgmt' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GE Messages

Error Message     
 
    
    
   

%L2-GE-3-INIT_ERR PRP Gigabit Ethernet execution agent initialization failed. [chars]/[chars]

Explanation    The PRP Gigabit ethernet execution agent failed to initialize. The PRP gigabit ethernet execution agent provides the support for packet forwarding over the GE port present on the Performance Route Processor. A failure of this execution agent likely means that packets being sent to or from the PRP's GE ports are going to be lost. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ge_mgmt location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart ge_mgmt location 0/x/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSR_aib Messages

Error Message     
 
    
    
   

%L2-GSR_aib-3-RES_ERROR Error: [chars]: Err equals [chars]

Explanation    A error occurred in GSR aib Driver resulting in a failure to provide some system service as indicated in the message text.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%L2-GSR_aib-6-INFO_MSG Info: [chars]

Explanation    This is a Informational message in the GSR aib driver to indicate an operation.

Recommended Action    No action is required.

GSR_edge_fwd_lib Messages

Error Message     
 
    
    
   

%L2-GSR_edge_fwd_lib-3-RES_ERROR [chars]: Err equals [chars]

Explanation    An error occurred in Edge fowarding lib resulting in a failure to provide some system service as indicated in the message text. %s - indicates the reason for the failure. %s - is the decoded error reason. This error indicates there is problem in LC Forwarding resources

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

GSR Messages

Error Message     
 
    
    
   

%L2-GSR-3-ERR_MEM_ALLOC Memory allocation failed for internal data storage

Explanation    Memory was not available for an internal data structure. The requested operation could not be accomplished because of a low memory condition. The LC will not boot up successfully and will not be able to participate in data forwarding.

Recommended Action    Reload the LC using 'hw-module' command. If the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Also ensure the LC is populated with the minimum amount of memory required for proper operation.

Error Message     
 
    
    
   

%L2-GSR-3-ERR_THREAD_CREATE Internal OS call to create additional threads failed, [chars]

Explanation    An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-ERR_THREAD_CREATE Internal OS call to create additional threads failed, [chars]

Explanation    An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT Call to checkpoint library failed, status equals [chars]

Explanation    An internal support library returned an error. The driver was not able to save data for restart ability. A restart of the FIAD process may not be NSF compliant. Any software upgrade requiring FIAD to be restarted will result in traffic loss. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT_DATA_EXISTS The driver is coming up in normal mode, but checkpoint information already exists.

Explanation    When a driver comes up in NORMAL_MODE, checkpointing data should not already exist. This indicates a mismatch in the driver state. The checkpointed data may be corrupted on the LC. Restart ability of processes may be affected.

Recommended Action    The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_CHKPT_RECOVERY_NODATA The driver is coming up in restart mode, but the checkpoint info does not exist.

Explanation    When a driver comes up in RECOVERY_MODE, checkpointing data should have already been saved to the checkpointing record by the previous life of the driver. This can impact the drivers ability to restart without affecting traffic.

Recommended Action    The system may not recover from this error automatically. A reload of the linecard should be initiated in order to recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_DEVCTL_ERR Unsupported devctl case [dec]

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_DLOPEN Failed to load [chars]

Explanation    The library (dll) named could not be found or there was an error while loading. Indicates a software installation problem. The LC will not boot up successfully and will not be able to participate in data forwarding.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_INT_ATTACH Internal OS call to process interrupts failed

Explanation    An internal OS library returned an error. Some error conditions on the LC may not be reported correctly. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card.

Recommended Action    The system will normally recover from this error without intervention. This error indiactes a more fundamental issue on the LC. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MEM_CHIP_ERR ([chars]): no memory for chip data.

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MEM_ERROR ([chars]): FIA failed to initialize memory. Exiting

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_MMAP_ERROR ([chars]): FIA memory mapping failed. Exiting

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_NOT_RESET FIA was not reset before programming

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_STARTUP_DATA ([chars]), Illegal size of input for FIA startup data structure

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_SYNC_ERROR ([chars]): FIA failed to sync, los_status [hex], los_error [hex], fia_config [hex]

Explanation    This error usually indicates an internal hardware problem on the card.

Recommended Action    If there are other error reports about the switch fabric (CSC/SFC) then wait several minutes for corrective action. Otherwise, run diagnostics for slot reporting error. Use 'diag slot verbose' command. (This command may not work for the slot containing the primary route processor.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNHALT Could not unhalt [chars]

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNSUPPORTED_CDB Unsupported cdb version

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FIA_UNSUPPORTED_OPAQUE_DATA Unsupported opaque data version

Explanation    An unexpected error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-FS_ERR1 [chars] : [hex]

Explanation    EE192 SerDes retimer driver error. An internal OS library returned an error. The system will usually recover from this error automatically. If the frequency of this alert increases noticeably it could indicate a OS kernel problem on the card. The LC will not boot up successfully and will not be able to participate in data forwarding. This condition can impact various processes on the LC. The LC is in unstable condition.

Recommended Action    The system will normally recover from this error without intervention. This error indiactes a more fundamental issue on the LC. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR_HW [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR2_HW [chars] : [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR3_HW [chars] : [chars] : [hex] [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR4_HW [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR5_HW [chars] : [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver single-bit error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR6_HW [chars] : [chars] : [hex] [hex] [hex]

Explanation    EE192 Spabrg driver single-bit error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-3-SPABRG_ERR7_HW [chars] : [hex] [hex]

Explanation    EE192 Spabrg driver error

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-4-ERR_SYSDB_SET system database item set failed [chars]

Explanation    Error in communication channel with the system database. There was a problem accessing the named item. This could be a temporary problem caused by an outage in the connection to the server. The connection will be restored, but the operation itself was aborted.

Recommended Action    Call your Cisco technical support representative and provide the gathered information. Copy the output of the following commands exactly as they appear. show processes fiad location X/X/X

Error Message     
 
    
    
   

%L2-GSR-4-FIA_EDM system database access failed [chars]

Explanation    Error in communication channel with clients. There was a problem accessing the system database item. This could be a temporary problem caused by an outage in the connection to the server. The connection will be restored, but the operation itself was aborted.

Recommended Action    Call your Cisco technical support representative and provide the gathered information. Copy the output of the following commands exactly as they appear. show processes fiad location X/X/X

Error Message     
 
    
    
   

%L2-GSR-6-FIA_INFO_MSG [chars]

Explanation    This is a Informational message in the FIA Driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-6-FIA_PCDS_FAILURE [chars] failed, slot equals [dec], error info equals [chars]

Explanation    This is a message indicating FIA PCDS failure.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-6-PCDS_STATS_TIMESTAMP_FAILURE pcds_get_timestamp failed for fishstick stats

Explanation    This is a message indicating failed to get timestamp for fishstick stats.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_CRIT_INFO [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver critical info

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO1_HW [chars] : [chars] : [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO2_HW [chars] : [chars] : [hex], [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-6-SPABRG_INFO3_HW [chars] : [chars] : [hex], [hex], [hex]

Explanation    EE192 Spabrg driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-GSR-7-FIA_FCTL [chars] failed, slot equals [dec], error info equals [chars]

Explanation    An interprocess call returned an error. Possibly a timeout. The central switch fabric software may not recognize the LC that exhibits this error. Maintenance bus may not be operating as desired.

Recommended Action    Look for other fctl messages. Wait for corrective action. The system will normally recover from this error without intervention. If the frequency with which this error is occurring increases substantially, call your Cisco technical support representative and provide the gathered information. Copy the output of the following commands exactly as they appear. show processes fctl show processes fiad location X/X/X show diag X/X/X show diag chassis-info

GT64115 Messages

Error Message     
 
    
    
   

%L2-GT64115-2-PCI_CONFIG Fatal error: [chars]: [dec]

Explanation    A fatal error occurred during GT64115 PCI Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GT64115-2-PCI_INIT Fatal error: [chars]

Explanation    A fatal error occurred during GT64115 PCI Driver initialization

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-GT64115-3-PCI_BRIDGE_INTR PCI Bridge Intr: [chars] [dec] [dec]

Explanation    This is an error message resulted from an interrupt from the PCI device.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

gulf Messages

Error Message     
 
    
    
   

%L2-gulf-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-4-WARNING warning: [chars]: [chars]: [dec]

Explanation    A warning condition is detected in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-6-INFO_MSG Info: [chars]: [chars]: [dec]

Explanation    This is a Informational message in the gulf driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-gulf-7-DEBUG_MSG Debug: [chars]: [chars]: [dec]

Explanation    This is a debug message in the gulf driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_QOS Messages

Error Message     
 
    
    
   

%L2-HALE_QOS-3-ERR_COMMIT Route ([chars],[chars])

Explanation    This message indicates a failure in committing route (S, G). This means QoS feature will not be applied for the specified route; Traffic through this route would go to the default queue. The causes for this error could be lack of memory, a hardware resource limitation, or an internal error. %s,%s - indicates the (S, G)

Recommended Action    If memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration. Retry the QoS configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HALE_TCAM Messages

Error Message     
 
    
    
   

%L2-HALE_TCAM-3-ERROR [chars]: [chars]

Explanation    A SW exception occurred in TCAM extension Library

Recommended Action    If TCAM memory is the issue, reduce other system activity to ease memory demands. If conditions warrant and minimum memory requirements not met, upgrade to a larger memory configuration.

HFA_COMMON Messages

Error Message     
 
    
    
   

%L2-HFA_COMMON-3-FATAL_ERR Fatal error: [chars]: Err equals [chars]

Explanation    A fatal error occurred in HFA common Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_COMMON-4-ANOMALY [chars]

Explanation    A SW exception of unexpected condition or an out of resources (memory, HW profiles, etc) situation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_COMMON-6-INFO_MSG [chars] [chars]

Explanation    This is a Informational message in the HFA common Driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-HFA_COMMON-6-INFO_WARNING [chars] err [hex]

Explanation    This is a Informational message in the HFA common Driver to indicate an operation.

Recommended Action    No action is required.

HFA_LIB Messages

Error Message     
 
    
    
   

%L2-HFA_LIB-3-ANOMALY [chars]

Explanation    Software exception. Quite probably a SW bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_CLIENT_CONF_FAILED hfa: blwm client configuration failed, error: [hex] [chars]

Explanation    Unable to configure BLWM client functionality.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_CLIENT_REBIND_FAILED hfa: blwm client rebind failed, error: [hex] [chars]

Explanation    Unable to rebind with BLWM client functionality after a connection reconnect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_MSG_SEND_FAILED hfa: blwm msg send/flush: retried: [dec] time(s), failed to send, error: [hex] [chars]

Explanation    Unable to send/flush a BLWM message to the HFA server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-BLWM_RECVD_REPLY_FAIL hfa: Received a failure reply code for a batched request, reply code: [dec]

Explanation    This is the message printed by the default handler installed by HFA to process the replies received for batched requests. The default handler's behavior is to just print this message. The application should install its own handler to handle the replies to batched requests.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-3-MSG_SEND_FAILED hfa: msg: [dec], retried: [dec] time(s), failed to send, errno: [chars]

Explanation    Unable to send a message to the HFA server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-4-BLWM_REPLAY_REQUEST hfa: Replaying a batched request of type [dec] that might have been partially processed before.

Explanation    Due to a server restart, a batched request might have been partially processed. The default handler installed by HFA simply replays the request. Applications that can not afford to replay a request should install their own handler.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-HFA_LIB-4-ERR_LOCK [chars] error on [chars], rc equals [dec]

Explanation    An error occurred when un/locking HFA HW

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-HFA_LIB-6-INFO_WARNING [chars]: [dec]

Explanation    This is a Informational message in the HFA client LIB to indicate an operation.

Recommended Action    No action is required.

if_discovery Messages

Error Message     
 
    
    
   

%L2-if_discovery-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in plim pos 4p oc12 Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-if_discovery-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the plim pos 4p oc12 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-if_discovery-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the plim pos 4p oc12 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IOB Messages

Error Message     
 
    
    
   

%L2-IOB-3-INTR IOB Intr: [chars]

Explanation    The IOB FPGA has been interrupted due to an access fault

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IOB-5-UNKNOWN_INTR IOB Intr: [chars]: [dec]: [dec]

Explanation    This is a message in the IOB FPGA driver to indicate that it has detected an unknown interrupt.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_EA Messages

Error Message     
 
    
    
   

%L2-IPV6_EA-3-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization process such as getting an evm failed.

Recommended Action    sysmgr will retry to start the hfrlc_ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%L2-IPV6_EA-3-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization process such as getting an evm failed.

Recommended Action    sysmgr will retry to start the ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%L2-IPV6_EA-3-NOMEM IPv6 EA failed to program '[chars]' due to low memory

Explanation    The IPv6 EA process could not allocate memory needed to program some IPv6 feature.

Recommended Action    Check memory status.

Error Message     
 
    
    
   

%L2-IPV6_EA-3-PLAT_UPD_FAILED Platform update failed: [chars] - [chars](CH[hex])

Explanation    Platform update failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6_EA-3-PLAT_UPD_FAILED_GL Platform update failed for [dec] interface: [chars] - [chars]

Explanation    Platform update failed for all interfaces in a batch.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6_EA-4-ERROR [chars]: [chars]

Explanation    There was an error with processing an event in the EA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IXP2800_FWD Messages

Error Message     
 
    
    
   

%L2-IXP2800_FWD-3-IPCP_FAILURE Function [chars] failure errno [chars]

Explanation    IPCP communication failure.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-3-NONFATAL_ERROR Nonfatal error: [chars] error code [dec]

Explanation    This is a error message of the IXP2800 forwarding driver to indicate either anomalies which are not fatal. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-7-LOG_FILE_ERROR Test DLL failed to open log file [chars] ([chars])

Explanation    The NPU test DLL failed to open the log file

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_FWD-7-UNEXPECTED_FUNC_INVOC Function [chars] invoked

Explanation    An unexpected function invocation occured

Recommended Action    None

IXP2800_HW Messages

Error Message     
 
    
    
   

%L2-IXP2800_HW-2-NOMEM ixp2800 HW driver Could not allocate memory

Explanation    'ixp2800 HW driver has failed to aquire the required amount of memory.'

Recommended Action    *REDUCE*

Error Message     
 
    
    
   

%L2-IXP2800_HW-3-FATAL_ERROR [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A fatal error occurred in IXP2800_HW Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IXP2800_HW-4-WARNING [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A warning condition occurred in IXP2800_HW Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IXP2800_HW-6-INFO [chars]

Explanation    SERVICE card ixp2800_hw driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-IXP2800_HW-7-LOG_FILE_ERROR ixp2800 HW driver DLL failed to open log file [chars] ([chars])

Explanation    The NPU HW driver DLL failed to open the log file

Recommended Action    None

IXP2800_VFW Messages

Error Message     
 
    
    
   

%L2-IXP2800_VFW-2-NOMEM ixp2800 service Could not allocate memory

Explanation    'ixp2800 vFW service has failed to aquire the required amount of memory.'

Recommended Action    *REDUCE*

Error Message     
 
    
    
   

%L2-IXP2800_VFW-3-FATAL_ERROR [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A fatal error occurred in IXP2800_SERVICE Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IXP2800_VFW-3-IPCP_FAILURE Function [chars] failure errno [chars]

Explanation    IPCP communication failure.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_VFW-3-NONFATAL_ERROR Nonfatal error: [chars] error code [dec]

Explanation    This is a error message of the IXP2800 service driver to indicate either anomalies which are not fatal. Some of the messages may indicate a failure to allocate resources needed by applications.

Recommended Action    None

Error Message     
 
    
    
   

%L2-IXP2800_VFW-4-WARNING [chars]()[[dec]]: [chars]: [chars] ([dec])

Explanation    A warning condition occurred in IXP2800_SERVICE Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IXP2800_VFW-6-INFO [chars]

Explanation    SERVICE card ixp2800_service driver informational message

Recommended Action    NONE : Informational message only

Error Message     
 
    
    
   

%L2-IXP2800_VFW-7-LOG_FILE_ERROR ixp2800 service DLL failed to open log file [chars] ([chars])

Explanation    The NPU service DLL failed to open the log file

Recommended Action    None

JACKET Messages

Error Message     
 
    
    
   

%L2-JACKET-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    A critical error occurred in jacket driver which involves exiting the process. The jacket driver will restart and unless the same error occurs on the next attempt the driver will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    A critical error occurred in jacket driver which involves exiting the process. The jacket driver will restart and unless the same error occurs on the next attempt the driver will function normally. If the error is persistent, it indicates the system error or HW error which needs further investigation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred while accessing the hardware in jacket driver which involves exiting the process. The driver will restart and attempt normal functionality. If the error is transient, the jacket driver and the SPAs will continue normal operation. If the error is persistent, the jacket card hardware needs to be checked out for access failures.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred while accessing the hardware in jacket driver which involves exiting the process. The driver will restart and attempt normal functionality. If the error is transient, the jacket driver and the SPAs will continue normal operation. If the error is persistent, the jacket card hardware needs to be checked out for access failures.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-RULES_CRITICAL_ERROR SPA subslot [dec]: FAILED: [chars] for [chars]

Explanation    A critical error occurred in jacket driver rules validation for a SPA which results in the SPA not being enabled. This does not affect the other slots on the jacket card. Please check the SW support for the SPA slot for which this message is seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-RULES_CRITICAL_ERROR SPA subslot [dec]: FAILED: [chars] for [chars]

Explanation    A critical error occurred in jacket driver rules validation for a SPA which results in the SPA not being enabled. This does not affect the other slots on the jacket card. Please check the SW support for the SPA slot for which this message is seen.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_DISABLE [dec] requests to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA and disable the SPA to avoid LC reload

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_DISABLE [dec] requests to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA and disable the SPA to avoid LC reload

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_PIO_ERROR SPA subslot [dec]: had [chars] error when accessing address [hex] with fault code [dec]

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_PIO_ERROR SPA subslot [dec]: had [chars] error when accessing address [hex] with fault code [dec]

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_SELF_DESTRUCT [chars] has requested to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-3-SPA_SELF_DESTRUCT [chars] has requested to disable SPA [dec] due to spa bus error

Explanation    This is an error message indicating a Hardware access error for a SPA. If this is a recurrent message, it usually is due to faulty hardware, loose connection at the SPA connector on the jacket card. Try reseating the SPA and see if the issue is resolved. If not, please check with TAC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-EVENT_INFO SPA subslot [dec]: [chars] for [chars], driver [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-EVENT_INFO SPA subslot [dec]: [chars] for [chars], driver [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-INFO [chars]: [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-6-INFO [chars]: [chars]

Explanation    This is an informational message in the jacket driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JACKET-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the jacket driver to indicate anomolies which are not critical. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JACKET-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the jacket driver to indicate anomolies which are not critical. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

JDAM Messages

Error Message     
 
    
    
   

%L2-JDAM-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in JDAM Driver which involves exiting the PLIM process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JDAM-6-INFO_MSG [chars] [chars] [dec]

Explanation    This is a Informational message in the JDAM driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JDAM-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the JDAM driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2C Messages

Error Message     
 
    
    
   

%L2-L2C-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistent state.

Explanation    The L2VPN Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2C-4-WARN_EVENT Event loop error: [chars]

Explanation    The L2VPN Uberverifier has encountered a problem in its event loop and cannot continue. In this situation it should restart.

Recommended Action    The L2VPN Uberverifier should recover on restart. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2C-4-WARN_INIT Failed to initialize [chars]: [chars]

Explanation    The L2VPN Uberverifier process failed to initialize correctly. In this situation it restarts, but may not recover if there is a persistant error in the IOS-XR system and the L2VPN Uberverifier is later unable to reestablish its connections and initialize successfully.

Recommended Action    The Uberverifier is not essential for system operation. However, if it is not running as intended, it may be possible for a misconfiguration to be allowed. If this persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2FIB_DEBUG-3-ERR [chars]: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_LIB Messages

Error Message     
 
    
    
   

%L2-L2FIB_LIB-2-OOR L2FIB has run out of [chars] resource memory. No more updates will be handled by the L2FIB. Please delete ACs to resume normal operation on this node

Explanation    The l2fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Significant ACs will have to be deleted on the affected node to resume normal l2fib operation.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-ERR [chars]

Explanation    Some error occurred in operations related to L2FIB API area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-4-RSRC_LOW L2FIB running low on [chars] resource memory. L2FIB will now begin resource constrained forwarding. Only route deletes will be handled in this state, which may result in mismatch between L2VPN mgr/AIB/L2FIB and L2FIB. Traffic loss on certain ACs can be expected. The L2FIB will automatically resume normal operation, once the resource utilization returns to normal level

Explanation    The l2fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has entered resource contrained forwarding mode. In this mode, the l2fib will only handle route deletes which may potentially freeup some memory. Due to this operational mode, the L2VPN mgr/AIB/L2FIB and L2FIB will be out of sync. Once ACs are deleted and resource utilization level drops to acceptable levels again, l2fib will come out of this operational mode and resume normal operation.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Any action that reduces number of ACs will eventually result in the l2fib returning to normal operation after few seconds.

L2FIB_SHM Messages

Error Message     
 
    
    
   

%L2-L2FIB_SHM-2-INIT L2FIB initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_SHM-3-ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB Messages

Error Message     
 
    
    
   

%L2-L2FIB-2-INIT L2FIB initialization failure: [chars] [chars]

Explanation    L2FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-INVALID_MSG L2FIB thread [chars] received an invalid message: [chars] [unsigned int]

Explanation    L2FIB thread got an invalid message so it is exiting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-SHM_INIT L2FIB shared memory initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-WAVL_ERR [chars] failed (tree equals [chars])

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-6-GEN_INFO_CERR [chars]: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-6-GEN_INFO_ERR [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2TP Messages

Error Message     
 
    
    
   

%L2-L2TP-2-INIT L2TP initialization failure: [chars] [chars]

Explanation    L2TP initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2TP-3-GEN_ERR L2TP internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2TP-3-IPC_ERR L2TP IPC transport error: [chars] [chars]

Explanation    An IPC transport software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2VPN_DEBUG-3-ERR [chars]: [chars]

Explanation    Debug and ltrace library initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_PW Messages

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-SANITY_ERROR Pseudowire Sanity check failed

Explanation    This is a fatal software error. It is probably a bug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-UPDOWN Pseudowire with address [chars], id [unsigned long int], state is [chars]

Explanation    The L2VPN Pseudowire went up or down

Recommended Action    If the state change was unexpected, confirm the configuration settings for the cross-connect.

L2VPN Messages

Error Message     
 
    
    
   

%L2-L2VPN-2-CRIT_MEM_SHUT [chars] process shutting down due to 'Critical' memory state.

Explanation    The system has notified a process that it is critically short of memory and the process is shutting down.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-ATM_ERR [chars] cell packing invalid value [dec]

Explanation    Some requested operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-EVENT_ERR [chars] failed: [chars]

Explanation    Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-GEN_ERR [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-INTERNAL_ERROR L2VPN sanity check failed for Pseudowire ID [chars] pw-id [unsigned long int]: [chars]. Limit is [dec]

Explanation    An internal error has been encountered and the Pseudowire cannot be established.

Recommended Action    Please provide the exact error message seen on the console, collect a core dump of the running l2vpn_mgr process, and the show tech-support l2vpn output for further analysis of the error condition and potential recovery

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-4-BRIDGE_MTU_MISMATCH [chars] mtu of [dec] does not match bridge mtu of [dec]

Explanation    The interface MTU does not match the bridge payload MTU.

Recommended Action    Configure the bridge to match the interface MTU.

Error Message     
 
    
    
   

%L2-L2VPN-4-ENCAP_REMOVED_PW Pseudowire encapsulation is deleted, pseudowire attached with pw-class '[chars]' will become unresolved

Explanation    Encapsulation in the pw-class is deleted, all pseudowires attached with this pw-class will be unresolved as encapsulation type become not specified.

Recommended Action    Config the psedowire encapsulation in the pw-class and re-attach the pw-class to the pseudowires.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_AC_SHUT Number of MAC addresses in AC '[chars]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the attachment circuit has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_BD_SHUT Number of MAC addresses in bridge-domain '[chars]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the bridge-domain has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the bridge-domain, it has been shut down. All the ports under the bridge too are automatically shutdown.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the bridge-domain up.

Error Message     
 
    
    
   

%L2-L2VPN-4-MAC_LIMIT_PW_SHUT Number of MAC addresses in PW '[chars], [unsigned long int]' has reached the configured MAC limit maximum and hence it has been shutdown

Explanation    Number of MAC addresses in the pseudowire has reached the configured maximum. Since 'shut' action has been configured for MAC limit event on the port, it has been shut down.

Recommended Action    Manual intervention is required to bring the port up again. Please use 'clear l2vpn bridge-domain' command to bring the port up.

Error Message     
 
    
    
   

%L2-L2VPN-4-PROVISIONING_WARNING L2VPN sanity check failed for Attachment Circuit on node [chars]: [chars]. Limit is [dec]

Explanation    An internal error has been encountered and the Attachment Circuit cannot be established.

Recommended Action    Verify that the number of Attachment Circuits (AC) on the router does not exceed the L2VPN scaling capability for that line card. It may get resolved by removing the configuration for the ACs that are in UR or DN state including the ones identified in this message. Then re-configure the required ACs without exceeding the node limit.

Error Message     
 
    
    
   

%L2-L2VPN-5-NO_LICENSE L2VPN AC manager could not get a license for node [chars], [chars]

Explanation    License is required for L2VPN feature to work, but AC manager could not get a license for the node from License manager.

Recommended Action    Install license for the feature.

Error Message     
 
    
    
   

%L2-L2VPN-6-BRIDGE_MTU_MISMATCH_CLEAR [chars] mtu of [dec] now matches bridge mtu

Explanation    The interface MTU now matches the bridge payload MTU.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-ENCAP_REMOVED_PW_CLEAR Unresolved pseudowire encapsulation has been resolved for pw-class '[chars]'

Explanation    Encapsulation in the pw-class is set, all pseudowires attached to this pw-class should be out of the unresolved state.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_AC_CLEAR Number of MAC addresses in AC '[chars]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_AC_SET Number of MAC addresses in AC '[chars]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_BD_CLEAR Number of MAC addresses in bridge-domain '[chars]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the attachment circuit has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the bridge-domain due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_BD_SET Number of MAC addresses in bridge-domain '[chars]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the bridge-domain has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_PW_CLEAR Number of MAC addresses in PW '[chars], [unsigned long int]' has gone below 75 percent of the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the pseudowire has gone below 75% of the configured maximum. If MAC learning or/and unicast flooding was disabled on the port due to MAC limit action, then it would get re-enabled automatically.

Recommended Action    No particular action is required.

Error Message     
 
    
    
   

%L2-L2VPN-6-MAC_LIMIT_PW_SET Number of MAC addresses in PW '[chars], [unsigned long int]' has reached the configured MAC limit maximum, [chars]

Explanation    Number of MAC addresses in the pseudowire has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular action might have been taken automatically.

Recommended Action    No particular action is required.

LACP_LITE Messages

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_LL_DLL_ASYNC_SEND_FAIL Send async pulse to lacp lite process fails; Error [chars]

Explanation    Attempt to send pulse to LACP lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_LL_DLL_CHAN_CONNECT_FAIL Cannot connect to lacp lite process; Error [chars]

Explanation    Attempt to connect to LACP lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_SHMEM_UNAVAILABLE LACP lite SHMEM can accommodate only [dec] records (request for [dec] records)

Explanation    BM-Local has requested transfer of more interface records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-LACP_LITE-3-ERR_UNSUPPORTED_FLAG LACP lite API is called with unsupportd flag (request for [dec])

Explanation    BM-Local has called LACP lite API with unsupported flag

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

MARVEL Messages

Error Message     
 
    
    
   

%L2-MARVEL-3-CHAN_CREATE Failed to create channel : [chars]

Explanation    Failed to create marvel-test (driver) channel using event_manager_create.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_INIT Debug initialization failed

Explanation    Initialization of the debug event failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_REG Debug registration failed : [chars]

Explanation    debug_register() call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-EVENT_MGR_FAIL [chars] : [chars]

Explanation    Generic failure of any event manager API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MMAP Failed to map device address : [chars]

Explanation    mmap() system call failed to map the device physical address.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MSG_REPLY Failed to send reply message : [chars]

Explanation    This error is reported when msg_reply() (LWM call) fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-NOMEM Failed to allocate memory

Explanation    This error is reported when malloc()/calloc() type system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-OPEN Failed to open file [chars] : [chars]

Explanation    This error is generated when the open() system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-6-RX_ASYNC_MSG Invalid asynchronous message received.

Explanation    This error is generated when an invalid asynchronous message is received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

METRO_STATS_API Messages

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-DEBUG_MSG Debug Msg : [chars]: [chars]

Explanation    This is a debug message in the Hardware Stats Manager Library to indicate anomalies. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client connection handle received is NULL 2. The arguments to the bind message are incorrect 3. Unable to bind to the hardware IPC driver 4. Error while trying to initialize debug event. 5. Not enough memory to bind to the client

Recommended Action    No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-ERR_DLL_INIT DLL INIT : [chars]: [chars]

Explanation    This error indicates that there was an error while initializing the stats dll.

Recommended Action    No action is required. The process is restarted automatically.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-ERR_THREAD Locking issues: [chars]: [chars]

Explanation    This error indicates that the Hardware Stats Manager Library is unable to initialize/destroy locking for client's attributes and tables.

Recommended Action    An error was returned by Stats Manager APIs to applications. Applications receiving this error will report it. Take recommended actions specified in the application's error message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-METRO_STATS_API-7-RESERVE_LMT_MSG Stats Counters Exhausted Msg : [chars] [dec] [chars] [dec] [chars] [chars]

Explanation    This is a debug message in the Hardware Stats Manager Library to indicate the stats reserve limit is reached. In most cases these messages will stop once the temporary condition is resolved. Examples of when this error occurs are: 1. The client tries more counters than that are free for that type

Recommended Action    No action is required. These are Debug messages. An error was returned by Stats Manager APIs to applications. Applications receiving this error will report the error.

METRO_STATS Messages

Error Message     
 
    
    
   

%L2-METRO_STATS-7-ERR_INIT [chars]: [chars]

Explanation    These errors are encountered at mstats process initialization time. The types of errors are: 1 Unable to determine hardware version. 2 Unable to create event manager. This will prevent stats process from receiving events. 3 Unable to create timer. 4 Unable to initialize client database. This will result in clients not being able to register with stats server to collect stats. 5 Unable to allocate Ingress/Egress stats. This will result in Stats manager not being able to maintain/update any hardware stats. 6 Unable to register with debug. This will prevent stats process from logging debug messages. 7 Unable to initialize or register with checkpoint service. This will prevent stats manager from restoring the information required at restart. 8 Unable to connect with SYSDB. This includes failure to connect, bind, register with SYSDB. 9 Unable to Initialize hardware packet service.

Recommended Action    No action is required. Process will be restarted. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-METRO_STATS-7-ERR_MEM Memory error: [chars]: [chars]

Explanation    An error occurred in Hardware Stats Manager during shared memory operations. This may be because the system is running low on memory. The types of errors are: 1 Cannot open/reset/close shared memory window 2 Cannot allocate/free shared memory. This will cause Stats Server to not be able to have a shadow copy of stats for all clients.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

METRO_UIDB Messages

Error Message     
 
    
    
   

%L2-METRO_UIDB-7-ERR_INIT [chars] failed due to [chars]

Explanation    Initialization of uidb_svr process has failed due to one of the following reasons: 1) Failed to create server context. 2) Failed to get schedular parameters. 3) Failed to initialize event manager. This would prevent process from receiving events. 4) Failed to register with debug. This would prevent process from logging debug messages. 5) Failed to bind UIDB server with MIPC server. This is needed to program features in hardware. 6) Failed to connect to PLIM asic processes. This is needed to program features in hardware. 7) Failed to initialize checkpoint. This is needed to checkpoint UIDB data to restore on process restart. 8) Failed to allocate, initialize and checkpoint shadow memory. This is needed to store and restore UIDB internal data. 9) Failed to get metro asic version. 10) Failed to attach event handlers needed to handle LWM messages. This is needed to enable/disable various features in hardware. 11) Various Sysdb or EDM failures 12) event_block failed. This indicates process has encountered unexpected error while waiting for events.

Recommended Action    No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

MFR_EA_LTRACE_DLL Messages

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE_DLL-3-OPER_FAIL ltrace dll : [chars]

Explanation    MFR EA ltrace dll operation failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_EA_LTRACE Messages

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-ERROR_INIT_FAIL ltrace initialization operation failed for error traces: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the error ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-EVENT_INIT_FAIL ltrace initialization operation failed for events: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the events ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA_LTRACE-3-INTERNAL_INIT_FAIL ltrace initialization operation failed for internal traces: [chars]

Explanation    The MFR EA ltrace lib failed to initialize the internal ltrace

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_EA Messages

Error Message     
 
    
    
   

%L2-MFR_EA-2-DPC_CALL_FAILED MFR EA failed handling a DPC [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The MFR EA process initialization failed whilst trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-INTERFACE_OPERATION_FAILED Interface [chars] operation failed for index [dec]

Explanation    The MFR EA process failed whilst trying to change interface state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_AIB_REMOVE_FAILED Failed during AIB remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove entry from AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_AIB_SET_FAILED Failed during AIB set , err: [chars]

Explanation    The MFR EA process failed whilst trying to insert entry to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_CAPS_ADD_FAILED Failed during caps set, err: [chars]

Explanation    The MFR EA process failed whilst trying to set caps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_CAPS_REMOVE_FAILED Failed during caps remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove caps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_ENCAP_REMOVE_FAILED Failed during encaps remove, err: [chars]

Explanation    The MFR EA process failed whilst trying to remove encaps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_ENCAP_SET_FAILED Failed during encaps set, err: [chars]

Explanation    The MFR EA process failed whilst trying to set encaps.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-MEMBER_INFO_COLLECT_FAILED Failed to collect member link inforamtion, err: [chars]

Explanation    The MFR EA process failed whilst trying to collect member link info.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-NO_STATS Failed to initialize MFR interface stats collection, err: [chars]

Explanation    The MFR EA interface stats collection initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_EA-3-STATE_CHANGE_FAILED Failed during interface state change, err: [chars]

Explanation    The MFR EA process failed whilst trying to change interface state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFR_MA Messages

Error Message     
 
    
    
   

%L2-MFR_MA-2-FAIL MFR MA failed to [chars]. Thread id is [dec]. [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-DPC_ERROR [chars] [hex] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ENCAP Unable to process mfr encapsulation request

Explanation    An error occurred processing a request to set mfr encapsulation on an interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_MEMBER_ADD Cannot add [chars] to bundle with nodeid [hex] and group [dec]

Explanation    Could not find the bundle interface with the nodeid and group. Hence cannot add the member interface to bundle.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_MUTEX_LOCK Mutex lock failed. [chars]

Explanation    Locking the mutex governing the access to MFR MA IDB database failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERR_PULSE Received unexpected Async Event [hex] for ifhandle [hex]

Explanation    IPC thread received an async event pulse for which there is no handler.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-ERROR [chars] [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-3-THREAD_ERROR [chars] . Thread id is [dec]. [chars]

Explanation    An error occurred during an operation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT Unexpected error encountered whilst [chars]: [chars]

Explanation    MFR MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT_CORRUPT Corrupt [chars] checkpoint record found: [chars]

Explanation    Whilst restoring one of its checkpoint tables MFR MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's MFR session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_CHKPT_DUPLICATE Duplicate [chars] checkpoint record found for [chars]

Explanation    Whilst restoring one of its checkpoint tables MFR MA found multiple entries for the same interface. MFR MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, MFR MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_MGD_TIMER Unexpected error encountered whilst [chars]: [chars]

Explanation    MFR MA encountered an unexpected error using the Managed Timer library. This is most likely due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the MFR MA process. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars]

Explanation    MFR MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-MFR_MA-6-SENDTO Packet send attempt timed out: [chars]

Explanation    The socket call to send a control packet timed out.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MICKEY Messages

Error Message     
 
    
    
   

%L2-MICKEY-2-INTR Mickey Intr: [chars]: [dec]: [dec]

Explanation    A high severity error has interrupted the Mickey FPGA. This might result in the PLIM being reset.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MICKEY-3-SERDES_CTRL Mickey Serdes Ctrl: [chars]: [dec]: [dec]: [dec]

Explanation    This message indicates that the software tried to configure an unsupported loopback type.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MICKEY-5-UNKNOWN_INTR Mickey Intr: [chars]: [dec]: [dec]

Explanation    This message indicates the Mickey FPGA has detected an unknown interrupt.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MLCTRLR Messages

Error Message     
 
    
    
   

%L2-MLCTRLR-2-NOMEM [chars]([dec]): not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

Error Message     
 
    
    
   

%L2-MLCTRLR-3-ERROR [chars]([dec]): [chars] failed ([chars]) - [chars]

Explanation    A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-ALARM [chars]: [chars] [chars]

Explanation    The specified MLCTRLR Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-FEAC [chars] [chars]

Explanation    New Far End Alarm Code received.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-LOOPSTATUS [chars] [chars]

Explanation    A configurable controller loopback status.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-UPDOWN [chars]: [chars] [chars]

Explanation    The specified MLCTRLR is operationally down due to alarm. Check alarm status using show controller Mlt command on the cli.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-WARNING [chars]([dec]): [chars] - [chars]

Explanation    A non-fatal error occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

MMSMLIB Messages

Error Message     
 
    
    
   

%L2-MMSMLIB-4-EXIT_ON_ERR [chars]. Reason: [chars]

Explanation    An error occurred in the PSE ASIC client library after which the client code cannot continue. This error is encountered when a client module (e.g. cli command) has difficulty retrieving information from the PSE driver. The root cause may be located in either hardware or software.

Recommended Action    *RECUR*

MOTHRA Messages

Error Message     
 
    
    
   

%L2-MOTHRA-3-FATAL_ERROR Fatal error: [chars]: [chars]: [hex]

Explanation    A fatal error occurred in mothra Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-3-FATAL_ERROR Fatal error: [chars]: [chars]: [hex]

Explanation    A fatal error occurred in mothra Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-3-PIO_FATAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A fatal error occurred in Santa Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-3-PIO_FATAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A fatal error occurred in Santa Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the mothra driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-MOTHRA-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the mothra driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-MOTHRA-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the mothra driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOTHRA-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the mothra driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MOUSE Messages

Error Message     
 
    
    
   

%L2-MOUSE-2-INTR Mouse Intr: [chars]: [dec]: [dec]

Explanation    A high severity error has interrupted the Mouse FPGA. This might result in the PLIM being reset.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MOUSE-5-UNKNOWN_INTR Mouse Intr: [chars]: [dec]: [dec]

Explanation    This message indicates the Mouse FPGA has detected an unknown interrupt.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MULTILINK_UV Messages

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistant state.

Explanation    The Multilink Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Multilink Messages

Error Message     
 
    
    
   

%L2-Multilink-3-INCORRECT_BW_UPDATE Bundle [chars] with bandwidth [dec]. Link ifh [hex] with bandwidth [dec]

Explanation    When the indicated member link was deactivated, bundle bandwidth could not be updated correctly as decrementing the link's bandwidth would have made the bundle bandwidth to go below zero. Bundle bandwidth is now made zero.

Recommended Action    Check the bundle and member interface status. Verify that the bundle bandwidth is correct now. If not, shut all the members of the bundle and then no shut all the members to bring back the bundle bandwidth to correct value.

Error Message     
 
    
    
   

%L2-Multilink-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-Multilink-4-ALARM [chars]: [chars] [chars]

Explanation    The specified Multilink Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

ND Messages

Error Message     
 
    
    
   

%L2-ND-3-INIT Process initialisation failed. [chars]: [chars] ([hex])

Explanation    There was a software error during process startup.

Recommended Action    The process will restart and try to recover. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart, then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the process does not restart automatically, restart it manually. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OAMMIB Messages

Error Message     
 
    
    
   

%L2-OAMMIB-3-NO_DEBUG Unable to register for OAM MIB debug. No further debugging will occur: [chars]

Explanation    In the initialisation of the OAM MIB DLL an error occurred whilst attempting to register for debugging. Consequently there will be no debug output from the OAM MIB DLL.

Recommended Action    Continue working with the OAM MIB DLL without any debugging taking place or restart the DLL such that during initialisation there is another attempt register for debugging.

Error Message     
 
    
    
   

%L2-OAMMIB-3-NO_TRAP Unable to register for SNMP traps. Traps will not be sent regardless of trap events occurring: [chars]

Explanation    In the initialisation of the OAM MIB DLL an error occurred whilst trying to register a callback function for the enabling of SNMP traps. Alternatively whilst trying to enable traps there was a failure in binding to SysDB for trap notifications.

Recommended Action    Continue working with the OAM MIB DLL without any the ability to send traps when events occur or restart the DLL such that there is another attempt to register for traps.

OC768_FRAMER_ASIC Messages

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    OC768 Framer ASIC Driver encountered a critical error which causes the process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    OC768 Framer ASIC Driver encountered a critical error which causes the process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-6-INFO [chars]: [chars]

Explanation    This is a informational message from OC768 Framer ASIC driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-6-INFO [chars]: [chars]

Explanation    This is a informational message from OC768 Framer ASIC driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in OC768 Framer ASIC driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OC768_FRAMER_ASIC-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in OC768 Framer ASIC driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OPTICS Messages

Error Message     
 
    
    
   

%L2-OPTICS-3-CRITICAL_ERROR Optical init failure: [chars]: [chars]: [hex]

Explanation    A critical error occurred in OPTICS Driver which involves exiting the process.

Recommended Action    Power cycle the plim.

Error Message     
 
    
    
   

%L2-OPTICS-3-CRITICAL_ERROR Optical init failure: [chars]: [chars]: [hex]

Explanation    A critical error occurred in OPTICS Driver which involves exiting the process.

Recommended Action    Power cycle the plim.

Error Message     
 
    
    
   

%L2-OPTICS-6-INFO Info: [chars]: [chars]

Explanation    This is an informational message in the OPTICS driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OPTICS-6-INFO Info: [chars]: [chars]

Explanation    This is an informational message in the OPTICS driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OPTICS-7-DEBUG_MSG Debug: [chars]: [chars] value [dec]

Explanation    This is a debug message in the optics driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OPTICS-7-DEBUG_MSG Debug: [chars]: [chars] value [dec]

Explanation    This is a debug message in the optics driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PFILTER_EA Messages

Error Message     
 
    
    
   

%L2-PFILTER_EA-3-ERR_IM_CAPS [chars] acl failed on interface CH[hex]. [chars]

Explanation    1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.

Recommended Action    1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.

Error Message     
 
    
    
   

%L2-PFILTER_EA-3-ERR_IM_CAPS [chars] acl failed on interface CH[hex]. [chars]

Explanation    1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.

Recommended Action    1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.

Error Message     
 
    
    
   

%L2-PFILTER_EA-3-INIT_ERROR Process initialization failed: ([chars]%s)

Explanation    The pfilter_ea process failed to initialize. This pfilter_ea process programs the 'packet filter' security access control list in the hardware. If the pfilter_ea process fails to initialize, the access control list cannot be programmed into the hardware. %s - indicates the reason for the initialization failure. %s - is the decoded error reason.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process pfilter_ea location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart pfilter_ea location 0/x/cpu0'. Collect all debug information if the process is continually restarting 'debug pfilter-ea all' (during the process restart). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PFILTER_EA-7-EVENT_ERROR Event Failure: ([chars])

Explanation    The pfilter_ea process received a bad event. This pfilter_ea process programs the 'packet filter' security access control list in the hardware. %s - is the decoded error reason.

Recommended Action    Monitor the event messages. The pfilter_ea process will handle the failure gracefully but if they continually appear on the console, try doing 'process restart pfilter_ea location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PFILTER_EA-7-INIT [chars] failed due to [chars]

Explanation    Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failure to connect with SYSDB. 4) Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs. 5) Failed to initialize connection with interface manager proxy service. 6) Failed to initialize RLB (range logic block) checkpoint. This is needed for checkpointing range logic block information for restore on process restart. 7) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 8) Failed to initialize callback function from Feature EA DLL for compiling IPv4/IPv6 TCAM entries needed for security ACL programming in hardeare. 9) Failed to initialize callback function from Feature EA DLL to handle reprogramming of RLB and IPv6 source prefix compression table request from TCAM manager. 10) Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 security ACLs programmed in hardware. 11) Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing. 12) event_block failed. This indicates process has encountered unexpected error while waiting for events. 13) Failed to initialize callback functions for receiving incremental updates for IPv4/IPv6 security ACL configuration.

Recommended Action    No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%L2-PFILTER_EA-7-INIT [chars] failed due to [chars]

Explanation    Initialization of packet filter process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to register with debug. This would prevent process from logging debug messages. 3) Failure to connect with SYSDB. 4) Failed initialize internal permit/deny entries for IPv4/IPv6. These entries are needed for programming/removal of hardware entries for IPv4/IPv6 security ACLs. 5) Failed to initialize connection with interface manager proxy service. 6) Failed to initialize RLB (range logic block) checkpoint. This is needed for checkpointing range logic block information for restore on process restart. 7) Failed to initialize Feature EA DLL API needed for programming of hardware resources. 8) Failed to initialize callback function from Feature EA DLL for compiling IPv4/IPv6 TCAM entries needed for security ACL programming in hardeare. 9) Failed to initialize callback function from Feature EA DLL to handle reprogramming of RLB and IPv6 source prefix compression table request from TCAM manager. 10) Failed to initialize feature checkpoint info. This is needed for checkpointing IPv4 and IPv6 security ACLs programmed in hardware. 11) Failed to initialize callback functions from ACL configuration manager to perform hardware resource checks and ACE resequencing. 12) event_block failed. This indicates process has encountered unexpected error while waiting for events. 13) Failed to initialize callback functions for receiving incremental updates for IPv4/IPv6 security ACL configuration.

Recommended Action    No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

PLAOC768_API Messages

Error Message     
 
    
    
   

%L2-PLAOC768_API-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLAOC768 system checkout Library encountered a critical error which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768_API-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLAOC768 system checkout Library encountered a critical error which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768_API-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message from the PLAOC768 system checkout Library to indicate either anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768_API-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message from the PLAOC768 system checkout Library to indicate either anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLAOC768 Messages

Error Message     
 
    
    
   

%L2-PLAOC768-3-ASIC_ERROR [chars] : block [dec] error [dec], [chars]

Explanation    An ASIC error occurred in PLAOC768 ASIC which is reported here.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-3-ASIC_ERROR [chars] : block [dec] error [dec], [chars]

Explanation    An ASIC error occurred in PLAOC768 ASIC which is reported here.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-3-CRITICAL_ERROR [chars]: [chars]: [dec]

Explanation    PLAOC768 Driver encountered an critical error condition which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-3-CRITICAL_ERROR [chars]: [chars]: [dec]

Explanation    PLAOC768 Driver encountered an critical error condition which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred in PLAOC768 Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred in PLAOC768 Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-6-INFO [chars]: [chars]

Explanation    This is a informational message in the PLAOC768 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLAOC768-6-INFO [chars]: [chars]

Explanation    This is a informational message in the PLAOC768 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLAOC768-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message from the PLAOC768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLAOC768-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message from the PLAOC768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLAT_L2FIB_VPLS Messages

Error Message     
 
    
    
   

%L2-PLAT_L2FIB_VPLS-7-DEBUG_ERROR PLATFORM-L2FIB-VPLS: Error - [chars] [chars] [chars] [dec]

Explanation    Failed to initialize the debugging module in the platform L2FIB VPLS component.

Recommended Action    None, platform software will correct itself if this happens.

Error Message     
 
    
    
   

%L2-PLAT_L2FIB_VPLS-7-INIT_ERROR PLATFORM-L2FIB-VPLS: Error - [chars]

Explanation    Failed to initialize the VPLS module in the platform L2FIB VPLS component.

Recommended Action    None, platform software will correct itself if this happens.

Error Message     
 
    
    
   

%L2-PLAT_L2FIB_VPLS-7-LTRACE_ERROR PLATFORM-L2FIB-VPLS: Error - [chars] [dec] [chars] [dec]

Explanation    Failed to initialize the ltrace module in the platform L2FIB VPLS component.

Recommended Action    None, platform software will correct itself if this happens.

Error Message     
 
    
    
   

%L2-PLAT_L2FIB_VPLS-7-PFI_ERROR PLATFORM-L2FIB-VPLS: Error - [chars] [chars] [chars] [dec]

Explanation    Failed to initialize the PFI-IFH module in the platform L2FIB VPLS component.

Recommended Action    None, platform software will correct itself if this happens.

PLATFORM_ATM_OAM Messages

Error Message     
 
    
    
   

%L2-PLATFORM_ATM_OAM-3-PACKET_RX ATM OAM PKT RX error:[chars]

Explanation    There was a software error while processing received OAM cell

Recommended Action    No action required if the message is displayed just a few times and stops after that. If the message repeats continously, collect the System Messages displayed on the console and provide them to cisco support. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

plim_4p_oc12 Messages

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-ALLOC_FAILED Process failed to allocate memory [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized due to unavailable memory and will be restarted. It may affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller,...

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-CREATE_THREAD_ERROR Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller,... %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-DEBUG_INIT_ERROR Debugging subsystem initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize it's debug subsystem. As result plim debug commands will not work on the PLIM module in question. The rest of functionality of the PLIM driver remains unaffected by the failure. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    Restart the process using 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0'. Process restart may affect traffic on all 4 oc12 interfaces located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-ERR_EVM_CREATE Interface module driver initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of such failure no trafiic may pass on all 4 oc12 ports located on the 4 port linecard. The interfaces associated with failed PLIM will not come up.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt to restart the process using command 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-ERR_EVM_EVENT_BLOCK process received invalid event [chars]

Explanation    Physical Layer Interface Module(PLIM) driver experience an errorr while awaiting for event arrival. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of the error the PLIM process will be restarted. Traffic may be interrupted on all affected interfaces. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-ERR_PORT_INIT PLIM port init failed [dec] stage-[chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize port. As result of the failure affected interfaces will not come up. %d - failed port number %s - specific stage of port initialization that failed PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer and Packet Over Sonet(POS) controller.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-FWD_REGISTER_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller,... %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-PORT_AVAILABLE_FAILED Port failed to become available [chars] [dec]

Explanation    Physical Layer Interface Module(PLIM) driver failed to make port available for forwarding. The interface in question will not forward packets. %s - error code %d - port number

Recommended Action    Restart the process using 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0'. Process restart may affect traffic on all 4 oc12 interfaces located on the line card. Reload the line card using 'hw-module location 0/slot/cpu0 reload' if the process restart failed to solve the problem.. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-RESET_FAILED PLIM reset failed [chars]

Explanation    The Physical Layer Interface Module(PLIM) driver failed to reset PLIM hardware. %s - error code PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist consider restarting plim process ( 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0'. PLIM process restart may affect traffic on all 4 oc12 ports. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-STATS_COLLECT_REGISTER_FAILED Statistics collector registration error [chars] [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to register PLIM interface statistics collector. No interface statistics such as sonet counters and packet counters will be available on the specified interface. %s - contains interface name %s - contains error code

Recommended Action    Restart the process using 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0'. Process restart may affect traffic on all 4 oc12 interfaces located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-STATSD_COLL_INIT_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller,... %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-TIMER_INIT_FAILED Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller,... %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_4p_oc12 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_4p_oc12 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-TX_CLK_GET_INVALID_PORT_CTX Failed to retrieve tx clock source

Explanation    Physical Layer Interface Module(PLIM) driver was unable to determine transmit clock source for the sonet port. The error may appear during show or configuration of the sonet port.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist contact technical support.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-3-TX_CLK_SET_INVALID_PORT_CTX Failed to configure tx clock source for sonet port

Explanation    Physical Layer Interface Module(PLIM) driver failed to make configure transmit clock source for the sonet port. The sonet port hardware configuration is invalid and may result in traffic being dropped or high error count on the port. This error may appear during attempt to configure clock source for the sonet port.

Recommended Action    Retry the sonet port configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_4p_oc12-4-INVALID_TIMER Invalid timer [dec]

Explanation    Physical Layer Interface Module(PLIM) driver received unknown timer event. %d - timer type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLIM_4P_OC192 Messages

Error Message     
 
    
    
   

%L2-PLIM_4P_OC192-3-DEVICE_INTR_CLEAR No Framer/RAC devices are generating excessive interrupts

Explanation    The previously reported excessive interrupts condition has been cleared. Interrupt rate limiting has been disabled.

Recommended Action    none

Error Message     
 
    
    
   

%L2-PLIM_4P_OC192-3-DEVICE_INTR_DISABLE Excessive interrupts from the [chars] device of port [hex]

Explanation    The specified device is generating excessive interrupts. This message indicates that we are rate limiting the interrupt coming from this device. This indicates a potential HW issue, traffic forwarding (protection switching) may be impacted.

Recommended Action    Check the fiber or the peer connection. If the problem persist after checking fiber and peer router, please contact support.

Error Message     
 
    
    
   

%L2-PLIM_4P_OC192-3-ERR [chars]

Explanation    fail to init debug service event manager fails to provide its service

Recommended Action    sysmgr will respawn plim_4p_oc192 'show logging' to look for the errors from event manager

Error Message     
 
    
    
   

%L2-PLIM_4P_OC192-3-MEM_ERR [chars]

Explanation    fail to allocate memory.

Recommended Action    sysmgr would restart the process. show process memory to find out whehter there is potential memory leak show memory to confirm system memory goes low

PLIM_ASIC_API Messages

Error Message     
 
    
    
   

%L2-PLIM_ASIC_API-7-ERR [chars] Reason:[chars]

Explanation    BAMBI API generated errors.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_ASIC_API-7-ERR [chars]

Explanation    BAMBI API generated errors.

Recommended Action    No action is required.

PLIM_ASIC Messages

Error Message     
 
    
    
   

%L2-PLIM_ASIC-2-EIO_TRAIN PLASPA: [chars]

Explanation    EIO training errors. The EIO link to the PLASPA failed to train. This will result in traffic loss through this PLIM.

Recommended Action    Check seating of both the PLIM and the MSC and then reload the MSC. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-3-ERR [chars]

Explanation    Plim asic driver errors. Typically these errors indicate failure in system services or bad programming of the hardware.

Recommended Action    Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-3-HW_ERR plaspa instance [dec] [chars], [chars]

Explanation    Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.

Recommended Action    Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-3-HW_ERR plaspa instance [dec] [chars], [chars]

Explanation    Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.

Recommended Action    Check whether process 'bambi_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-3-LTRACE_INIT Ltrace init for file [chars] failed [chars]

Explanation    --

Recommended Action    Typcially these indicate that ltrace is out of service. check at other processes using ltrace and see whether the problem happens to them.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-3-LTRACE_INIT Ltrace init for file [chars] failed [chars]

Explanation    --

Recommended Action    Typcially these indicate that ltrace is out of service. check at other processes using ltrace and see whether the problem happens to them.

Error Message     
 
    
    
   

%L2-PLIM_ASIC-7-ERR [chars]

Explanation    Plim asic driver errors. Typically these errors indicate failure in system services or bad programming of the hardware.

Recommended Action    No action is required.

PLIM_CLKSEL Messages

Error Message     
 
    
    
   

%L2-PLIM_CLKSEL-3-ERR_INIT PLIM process is restarted because of a failure in Clock Selection Library initialization: ([chars]/[chars]).

Explanation    The initilaization of the Clock Selection Library failed. The Clock Selection Library is used by the physical layer interface module (PLIM) driver on the linecard. The PLIM driver creates the SONET controller and POS interface, handling the all the SONET event, applying SONET/POS configuration to the layer-1 device hardware. If the PLIM driver fails to initialize, no traffic will pass, therefore no higher level protocol will work. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn the PLIM process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process process name location 0/x/cpu0' to verify that the process is up and running, where process name equals 'pl_e48_pos_4p_oc12' for OC12 linecard; 'pl_e48_pos_1p_oc48' for OC48 linecard; If it is still non-operational, try to do a manually process restart with CLI: 'process restart process name location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_CLKSEL-4-ERR_DEBUG Debug initialization failed with [chars].

Explanation    Debug message initialzation failed.

Recommended Action    This error has no effect on any feature except that debug information cannot be turned on by CLI 'debug plim-clksel location 0/x/CPU0'. Restarting the process with the CLI below, process restart will not affect traffic. 'process restart process name location 0/x/CPU0' may resolve the problem.

PLIM_FPGA Messages

Error Message     
 
    
    
   

%L2-PLIM_FPGA-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLIM FPGA ASIC Driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLIM FPGA ASIC Driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred in PLIM FPGA Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-3-PIO_CRITICAL_ERROR Asic PIO failure : [chars], instance [dec]: rc [dec] cerr [chars] errno [dec] data1 [hex] data2 [hex]

Explanation    A critical error occurred in PLIM FPGA Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-6-INFO [chars]: [chars]

Explanation    This is a informational message from PLIM FPGA driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-6-INFO [chars]: [chars]

Explanation    This is a informational message from PLIM FPGA driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-7-DEBUG_MSG Debug: [chars]: [chars] value [dec]

Explanation    This is a debug message in PLIM FPGA driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_FPGA-7-DEBUG_MSG Debug: [chars]: [chars] value [dec]

Explanation    This is a debug message in PLIM FPGA driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLIM_IOX_4P_GE Messages

Error Message     
 
    
    
   

%L2-PLIM_IOX_4P_GE-3-INIT_ERR Initialization error: [chars]: [chars]

Explanation    The 4 port Gigabit Ethernet (GE) driver failed to initialize properly. This driver provides the system access to the hardware. A failure during initialization of this process may render the interfaces provided by the hardware unusable. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process plim_iox_4p_ge location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart plim_iox_4p_ge location 0/x/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_IOX_4P_GE-6-INFO_MSG [chars] [dec]

Explanation    This is an Informational message in the plim_iox_4p_ge driver to indicate operation that may be of interest to the user.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_IOX_4P_GE-6-RXLOS_INT SFP Rx LOS Interrupt: port: [dec], count equals [dec]

Explanation    This is an informational message in the gigE driver driver to indicate a Loss of Signal (LOS) has occurred on the indicated port.

Recommended Action    1. Ensure the equipment at the far end of the link is functioning and configurations are correct. 2. Ensure the cable are installed correctly Rx plugged into far-end Tx & Tx plugged into far-end Rx 3. Check SFP and cable compatability. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLIM_LIB Messages

Error Message     
 
    
    
   

%L2-PLIM_LIB-2-ERR_FM_REPLY Physical layer interface module library failed to reply to the Fault Manager for error recovery: [chars]

Explanation    The PLIM driver soft error recovery failed because the PLIM library function failed with replying to the Fault Manager request. If the PLIM soft error recovery failed, the PLIM hardware state may not be in the correct state, and the traffic may be affected. %s - is the decoded error reason

Recommended Action    The Fault Manager will reset the linecard if the error recovery failed, search through the event logs, if there is no any message indicating that the Fault Manager has reset the linecard, try to do a manually reset with CLI: 'hw-module location 0/x/cpu0 reload' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-2-ERR_FM_REQUEST The Fault Manager cannot send message to physical layer interface module driver to start soft error recovery: [chars]/[chars]

Explanation    When a soft error is detected with any ASIC on the datapath, the Fault Manager will start the soft error recovery on the datapath. If the Fault Manager cannot send request to the PLIM driver, the soft error recovery will not be completed, therefore the traffic will not go through the datapath. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The Fault Manager will reset the linecard if sending message failed, search through the event logs, if there is no any message indicating that the Fault Manager has reset the linecard, try to do a manually reset with CLI: 'hw-module location 0/x/cpu0 reload' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-3-ERR_INIT Physical layer interface module library initialization failed: ([chars]/[chars]).

Explanation    The physical layer interface module (PLIM) library on the linecard failed to initialize. The PLIM library is used by PLIM driver which creates the SONET controller, POS interface, handling the all the SONET event and applying SONET/POS configuration to the layer1 devices. If the PLIM driver failed to initialize, no traffic will pass, therefore no higher level protocol will work. %s - indicates the reason for the failure %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn the PLIM process, up to a fixed number of times when this error is encountered, to recover. Execute the following command to verify that the process is up and running. 'show process process name location 0/x/cpu0' where process name equals 'e48_plim_oc3' for OC3 linecard; 'pl_e48_pos_4p_oc12' for OC12 linecard; 'pl_e48_pos_1p_oc48' for OC48 linecard; If it is still non-operational, try to do a manually process restart with CLI: 'process restart process name location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-3-ERROR error: [chars]: [chars]: [hex]

Explanation    A fatal error occurred in the plim library driver which involves exiting the process.

Recommended Action    collect the info from 'show diag', 'show hfr', 'show inv' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-3-ERROR error: [chars]: [chars]: [hex]

Explanation    A fatal error occurred in the plim library driver which involves exiting the process.

Recommended Action    collect the info from 'show diag', 'show hfr', 'show inv' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-4-ERR_MSG_RCV Physical layer interface module library failed in receiving the message: [chars]

Explanation    The PLIM library detects a failure condition when receiving the message. The message is used only for error recovery, the process should not receive the message in normal case. This error means a error condition is detected while the process is waiting for a message, it can be ignored if the error does not persist. Otherwise, if the error persists, it is recommended to restart the process, restarting process will not affect the traffic.

Recommended Action    If the error persists, execute the following command to restart the process. 'process restart process name location 0/x/cpu0' where process name equals 'e48_plim_oc3' for OC3 linecard; 'pl_e48_pos_4p_oc12' for OC12 linecard; 'pl_e48_pos_1p_oc48' for OC48 linecard; If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_LIB-7-DEBUG [chars]: [chars] errno [dec]

Explanation    This is a debug message in the PLIM library driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    'show logging' to confirm sysdb errors

Error Message     
 
    
    
   

%L2-PLIM_LIB-7-DEBUG [chars]: [chars] errno [dec]

Explanation    This is a debug message in the PLIM library driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    'show logging' to confirm sysdb errors

plim_oc48 Messages

Error Message     
 
    
    
   

%L2-plim_oc48-3-ALLOC_FAILED Process failed to allocate memory [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized due to unavailable memory and will be restarted. It may affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver.

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ALLOC_FAILED Process failed to allocate memory [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized due to unavailable memory and will be restarted. It may affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver.

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-CREATE_THREAD_ERROR Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-CREATE_THREAD_ERROR Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-DEBUG_INIT_ERROR Debugging subsystem initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize it's debug subsystem. As result plim debug commands will not work on the PLIM module in question. The rest of functionality of the PLIM driver remains unaffected by the failure. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-DEBUG_INIT_ERROR Debugging subsystem initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize it's debug subsystem. As result plim debug commands will not work on the PLIM module in question. The rest of functionality of the PLIM driver remains unaffected by the failure. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_EVM_CREATE Interface module driver initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of such failure no trafiic may pass on the oc48 port located on the linecard. The interfaces associated with failed PLIM will not come up.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt to restart the process using command 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_EVM_CREATE Interface module driver initialization failed

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of such failure no trafiic may pass on the oc48 port located on the linecard. The interfaces associated with failed PLIM will not come up.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt to restart the process using command 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_EVM_EVENT_BLOCK process received invalid event [chars]

Explanation    Physical Layer Interface Module(PLIM) driver experience an errorr while awaiting for event arrival. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of the error the PLIM process will be restarted. Traffic may be interrupted on all affected interfaces. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_EVM_EVENT_BLOCK process received invalid event [chars]

Explanation    Physical Layer Interface Module(PLIM) driver experience an errorr while awaiting for event arrival. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller. As result of the error the PLIM process will be restarted. Traffic may be interrupted on all affected interfaces. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered to recover. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If it's not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_MBUS_OP Optical parameter measurement error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to measure laser bias or optical receive power. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. PLIM driver performs periodic measurements of the laser bias and received signal optical power. The results of such measurements are represented in the 'show controller pos 0/slot/0/0' command under the 'optical power monitoring' section. %s - error code

Recommended Action    If the error persist reset the linecard using 'hw-module location 0/slot/CPU0 reload' command. The line card restart may affect traffic passing on the oc48 interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_MBUS_OP Optical parameter measurement error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to measure laser bias or optical receive power. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. PLIM driver performs periodic measurements of the laser bias and received signal optical power. The results of such measurements are represented in the 'show controller pos 0/slot/0/0' command under the 'optical power monitoring' section. %s - error code

Recommended Action    If the error persist reset the linecard using 'hw-module location 0/slot/CPU0 reload' command. The line card restart may affect traffic passing on the oc48 interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_PORT_INIT PLIM port init failed [dec] stage-[chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize port. As result of the failure affected interfaces will not come up. %d - failed port number %s - specific stage of port initialization that failed PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer and Packet Over Sonet(POS) controller.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-ERR_PORT_INIT PLIM port init failed [dec] stage-[chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize port. As result of the failure affected interfaces will not come up. %d - failed port number %s - specific stage of port initialization that failed PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer and Packet Over Sonet(POS) controller.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-FWD_REGISTER_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-FWD_REGISTER_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-PORT_AVAILABLE_FAILED Port failed to become available [chars] [dec]

Explanation    Physical Layer Interface Module(PLIM) driver failed to make port available for forwarding. The interface in question will not forward packets. %s - error code %d - port number

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. Reload the line card using 'hw-module location 0/slot/cpu0 reload' if the process restart failed to solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-PORT_AVAILABLE_FAILED Port failed to become available [chars] [dec]

Explanation    Physical Layer Interface Module(PLIM) driver failed to make port available for forwarding. The interface in question will not forward packets. %s - error code %d - port number

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. Reload the line card using 'hw-module location 0/slot/cpu0 reload' if the process restart failed to solve the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-RESET_FAILED PLIM reset failed [chars]

Explanation    The Physical Layer Interface Module(PLIM) driver failed to reset PLIM hardware. %s - error code PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist consider restarting plim process ( 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. PLIM process restart may affect traffic on the oc48 port located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-RESET_FAILED PLIM reset failed [chars]

Explanation    The Physical Layer Interface Module(PLIM) driver failed to reset PLIM hardware. %s - error code PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist consider restarting plim process ( 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. PLIM process restart may affect traffic on the oc48 port located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-STATS_COLLECT_REGISTER_FAILED Statistics collector registration error [chars] [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to register PLIM interface statistics collector. No interface statistics such as sonet counters and packet counters will be available on the specified interface. %s - contains interface name %s - contains error code

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-STATS_COLLECT_REGISTER_FAILED Statistics collector registration error [chars] [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to register PLIM interface statistics collector. No interface statistics such as sonet counters and packet counters will be available on the specified interface. %s - contains interface name %s - contains error code

Recommended Action    Restart the process using 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0'. Process restart may affect traffic on the oc48 interface located on the line card. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-STATSD_COLL_INIT_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-STATSD_COLL_INIT_ERROR Process initialization error [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialized and will be restarted. It will affect traffic passing through the ports located on the PLIM. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically restart this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TIMER_INIT_FAILED Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TIMER_INIT_FAILED Process init failed [chars]

Explanation    Physical Layer Interface Module(PLIM) driver failed to initialize. PLIM driver is responsible for initializing/configuring PLIM hardware such as sonet framer, Packet Over Sonet(POS) controller, optical transceiver. %s - error code

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process up to a fixed number of times when this error is encountered. Execute 'show process pl_e48_pos_1p_oc48 location 0/slot/cpu0' to verify that the process is up and running. If the process is not operational attempt 'process restart pl_e48_pos_1p_oc48 location 0/slot/cpu0' where slot - is slot number in question. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TX_CLK_GET_INVALID_PORT_CTX Failed to retrieve tx clock source

Explanation    Physical Layer Interface Module(PLIM) driver was unable to determine transmit clock source for the sonet port. The error may appear during show or configuration of the sonet port.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist contact technical support.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TX_CLK_GET_INVALID_PORT_CTX Failed to retrieve tx clock source

Explanation    Physical Layer Interface Module(PLIM) driver was unable to determine transmit clock source for the sonet port. The error may appear during show or configuration of the sonet port.

Recommended Action    If the error occurred during user command execution retry the command and if the error persist contact technical support.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TX_CLK_SET_INVALID_PORT_CTX Failed to configure tx clock source for sonet port

Explanation    Physical Layer Interface Module(PLIM) driver failed to make configure transmit clock source for the sonet port. The sonet port hardware configuration is invalid and may result in traffic being dropped or high error count on the port. This error may appear during attempt to configure clock source for the sonet port.

Recommended Action    Retry the sonet port configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-3-TX_CLK_SET_INVALID_PORT_CTX Failed to configure tx clock source for sonet port

Explanation    Physical Layer Interface Module(PLIM) driver failed to make configure transmit clock source for the sonet port. The sonet port hardware configuration is invalid and may result in traffic being dropped or high error count on the port. This error may appear during attempt to configure clock source for the sonet port.

Recommended Action    Retry the sonet port configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-4-INVALID_TIMER Invalid timer [dec]

Explanation    Physical Layer Interface Module(PLIM) driver received unknown timer event. %d - timer type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-plim_oc48-4-INVALID_TIMER Invalid timer [dec]

Explanation    Physical Layer Interface Module(PLIM) driver received unknown timer event. %d - timer type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLIM_OC768 Messages

Error Message     
 
    
    
   

%L2-PLIM_OC768-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLIM OC768 driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_OC768-3-CRITICAL_ERROR [chars]: [chars]: [hex]

Explanation    PLIM OC768 driver encountered a critical error as described in the error message. This error causes PLIM OC768 process to exit.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_OC768-6-INFO [chars]: [chars]

Explanation    This is an informational message from PLIM OC768 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_OC768-6-INFO [chars]: [chars]

Explanation    This is an informational message from PLIM OC768 driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PLIM_OC768-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the plim_oc768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM_OC768-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the plim_oc768 driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLIM Messages

Error Message     
 
    
    
   

%L2-PLIM-2-EIO_TRAIN PLA: [chars], [chars]

Explanation    EIO training errors. The PLA EIO failed to train... this will result in traffic loss and the MSC will fail to send traffic thru the PLIM.

Recommended Action    Currently, the only recovery is for an MSC reload. Once the Fault-Mgr is available, the ASIC will be reset in order to retrain the EIO. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM-3-CHK_ERR PLA: [chars], [chars]

Explanation    Checkpoint Initialization Failure. The pla_server process failed to initialize its checkpointing data. The process cannot continue and needs to be restarted.

Recommended Action    None, the process should recover. If it does not, the system will most likely be in an unrecoverable state and will take appropriate action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM-3-ERR [chars]

Explanation    fail to init debug events; sysdb fails to provide services; event mgr fails to provides its services;

Recommended Action    pla_server would be restarted by sysmgr. check out whether there is any problems with sysdb check out whether there is any problems with the event mgr there should be error msgs from sysdb or event msg. 'show logging' could confirm this sh plim pla trace info sh plim pla trace error

Error Message     
 
    
    
   

%L2-PLIM-3-HW_ERR asic error: [chars]

Explanation    Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.

Recommended Action    Check whether process 'pla_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM-3-HW_ERR asic error: [chars]

Explanation    Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and can trigger a reload of the LC.

Recommended Action    Check whether process 'pla_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PLIM-3-INCONSISTENT_CONFIG [chars]

Explanation    As part of trying to configure dot1q vlan with vlan id same as that of outer vlan of QinQ configuration or vice versa on another sub-interface, then error has to be reported to remove the inconsistent config.

Recommended Action    Upon seeing this message, delete the subinterface that has just been created. Otherwise the system will be in inconsistent state.

Error Message     
 
    
    
   

%L2-PLIM-3-MEM_ERR [chars]

Explanation    fail to allocate memory.

Recommended Action    show process memory to find out whehter there is potential memory leak show memory to confirm system memory goes low sh plim pla trace info sh plim pla trace error

Error Message     
 
    
    
   

%L2-PLIM-3-MEM_ERR [chars]

Explanation    fail to allocate memory.

Recommended Action    show process memory to find out whehter there is potential memory leak show memory to confirm system memory goes low

Error Message     
 
    
    
   

%L2-PLIM-3-SQUID_ERR [chars]

Explanation    squid fails to find the device

Recommended Action    1. reseat the plim. 2. if the problem is still there after reseating, run diag on the plim

Error Message     
 
    
    
   

%L2-PLIM-3-SQUID_ERR [chars]

Explanation    squid fails to find the device

Recommended Action    1. reseat the plim. 2. if the problem is still there after reseating, run diag on the plim

Error Message     
 
    
    
   

%L2-PLIM-7-ERR [chars]

Explanation    fail to init debug events; sysdb fails to provide services; event mgr fails to provides its services;

Recommended Action    pla_server would be restarted by sysmgr. check out whether there is any problems with sysdb check out whether there is any problems with the event mgr there should be error msgs from sysdb or event msg. 'show logging' could confirm this

Error Message     
 
    
    
   

%L2-PLIM-7-LTRACE_ERR [chars] : [chars]

Explanation    failed to inititialize ltrace events;

Recommended Action    check out whether there is any problems with ltrace subsytem

pm5315 Messages

Error Message     
 
    
    
   

%L2-pm5315-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in karachi Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-pm5315-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the karachi driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-pm5315-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the karachi driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

pm5316 Messages

Error Message     
 
    
    
   

%L2-pm5316-3-FATAL_ERROR [chars](): fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in plim Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-pm5316-4-WARNING [chars](): warning: [chars]: [chars]: [dec]

Explanation    A warning condition occurred in plim Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

PM622 Messages

Error Message     
 
    
    
   

%L2-PM622-2-error [chars]

Explanation    A high severity error has occurred in PLIM FPGA. This might result in the PLIM being reset.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PMSAR Messages

Error Message     
 
    
    
   

%L2-PMSAR-2-CFG_ERR : [chars]: [dec]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CHAN_STATS_ERR [chars]() [dec], chan:[dec],[dec],[dec]; cid:[dec], sar:[dec] reason:[chars] status:[dec], ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CLOSE_VC_COSQ_ERR [chars]() [dec], close cosq failure. rsar:[dec], ssar:[dec], queue:[dec], cosq_id:[dec] reason:[chars]; status:[dec] ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CLOSE_VC_ERR [chars]() [dec], close vc failure. rsar:[dec], ssar:[dec], vpi:[dec], vci:[dec] reason:[chars]; status:[dec] ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CMD_ACK_ERR [chars]() [dec], SAR:[dec] poll incomplete cmd ack, [chars]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CMD_ERR [chars]

Explanation    A critical PM622 TSP command failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CMD_POLL_TIMEOUT [chars]() [dec], SAR:[dec] cmd poll timed out, [chars]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-CMD_POST_ERR [chars]() [dec], SAR:[dec] post cmd failure. status:[dec], [chars] [dec] ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-INITERR Fatal error: [chars]: [hex]

Explanation    SAR device cx27470 initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-MMAPERR [chars](),[dec]: [chars] [hex]

Explanation    SAR device cx27470 mmap access violation failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-MUTEX_TIMEOUT [chars]() [dec], Get SAR:[dec], thread_id:[dec] mutex timed out, [chars]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-OPEN_VC_ERR [chars]() [dec], open vc failure. rsar:[dec], ssar:[dec], vpi:[dec], vci:[dec] reason:[chars]; status:[dec], ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-OPEN_VP_ERR [chars]() [dec], open vp failure. sar:[dec] vpi:[dec], reason:[chars]; ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-PORT_STATS_ERR [chars]() [dec], port stats failure. sar:[dec] reason:[chars]; status:[dec], ack:[hex], [hex], [hex], [hex]

Explanation    A fatal error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-2-RESOURCE_ERR [chars] [dec], [chars] with errno:[dec]

Explanation    A critical IOX resource request failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-3-ESYS_ERR [chars] [dec]: reason [chars] errno:[dec]

Explanation    CX27470 esys generic fatal error message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-3-ESYS_LOAD_ELF [chars] [dec]: file [chars] [chars] [chars]

Explanation    CX27470 esys load elf input file symbol not found.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-3-EVENT_INDICATE [chars]() [dec], reason:[chars]; sar:[dec], log_entry_index:[dec], type:[dec], status:[dec]

Explanation    An event raised PM SAR Driver, check the event type

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-3-UNKNOWN_EVENT [chars]() [dec], reason:[chars]; sar:[dec], log_entry_index:[dec]

Explanation    An unknown event raised PM SAR Driver

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-4-WARNING [chars]

Explanation    PM622 TSP CX27470 warning condition

Recommended Action    Debug message only. No action is required.

Error Message     
 
    
    
   

%L2-PMSAR-6-event_dump [chars]() [dec], sar:[dec], event type:[dec], status:[dec]; hex dump:[hex], [hex], [hex], [hex]

Explanation    A warning or error occurred during PM SAR Driver cofiguration

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PMSAR-6-INFO [chars] [hex]

Explanation    PM622 TSP CX27470 information

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PMSAR-7-DEBUG [chars]

Explanation    PM622 TSP CX27470 debug information

Recommended Action    Debug message only. No action is required.

POS Messages

Error Message     
 
    
    
   

%L2-POS-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

PPP_EA Messages

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_BATCH_ALLOC Failed to allocate batch for '[chars]'

Explanation    The process failed to allocate memory to handle the event described in the message.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. The ppp_ea process should be restarted to recover using the command 'process restart ppp_ea location R/S/I'.

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_EVM_EVENT_BLOCK Error encountered in the event loop: [chars]. The PPP EA process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The PPP EA process will restart

Explanation    A failure occured during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. The ppp_ea process should be restarted to recover using the command 'process restart ppp_ea location R/S/I'.

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_RWMGR Unexpected error whilst [chars]: [chars]

Explanation    PPP EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_RWMGR_IF CH[hex]: Unexpected error whilst [chars]: [chars]

Explanation    PPP EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Rewrite Manager Server process, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP EA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_EA-6-ERR_IM_MULTIPLE_NTFCNS CH[hex]: Multiple [chars] notifications received in a single batch from IM

Explanation    A batch from IM contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the PPP EA. No problems should be seen as a result.

Recommended Action    *NONE*

PPP_FSM Messages

Error Message     
 
    
    
   

%L2-PPP_FSM-3-ERR_SOCKET [chars]: Socket [chars] failed; [chars]

Explanation    There is a communication problem with the PPP socket.

Recommended Action    Restart the ppp_socket process on the node where the error is reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_GBL_CFG Messages

Error Message     
 
    
    
   

%L2-PPP_GBL_CFG-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    The PPP GBL CFG process failed to initialize correctly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_LCP Messages

Error Message     
 
    
    
   

%L2-PPP_LCP-3-AAA_SESSION_CLEANUP_FAILED CH[hex]: Cleanup of a subscriber session has failed: [chars]

Explanation    A call to AAA to remove subscriber session state has failed. The error may cause the LCP session on the subscriber interface to be left permanently in what should be a transient unnegotiated state.

Recommended Action    To remove the stale sessions, run clear subscriber for this interface.

Error Message     
 
    
    
   

%L2-PPP_LCP-3-MTU_UNUSABLE [chars] has an interface MTU of [unsigned int] which is smaller than the PPP packet header size ([unsigned int]) and so PPP cannot run on the interface

Explanation    PPP has been informed that the lower-layer MTU has been set to a value smaller than the PPP header size, which makes it impossible for PPP to operate.

Recommended Action    Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-ERR_AAA_IEDGE_SESSION Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA iEDGE service. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_LCP-4-L2_NOT_SUPPORTED L2 mode is not supported on CH[hex]

Explanation    L2transport has been configured on an interface that does not support it. The interface will not enter L2 mode, and will remain in whichever mode it was in before. This will occur if the interface capabilities do not support L2 mode, or if L2 mode is configured on a multilink bundle member.

Recommended Action    Reconfigure the interface so that l2transport is not enabled.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-MISSING_AUTHENTICATION_LIST AAA authentication list [chars] is not defined for PPP

Explanation    One or more PPP interfaces have been configured to authenticate the peer using the authentication list identified in the error message, but this authentication list has not been configured in AAA itself. As a result PPP will be unable to authenticate the peer and the line protocol on the relevant interface or interfaces will not come up.

Recommended Action    Configure 'aaa authentication ppp listname ...'

Error Message     
 
    
    
   

%L2-PPP_LCP-4-MTU_WARNING [chars] has a PPP MTU of [unsigned int] which is smaller than the minimum value ([unsigned int]) required for correct operation

Explanation    RFC 1661 requires that the media that PPP is running over is always able to receive PPP packets of sizes up to 1500 bytes (where this value excludes the 4 bytes of PPP header). This is to ensure that the peer can always send control protocol packets up to this size if they ever need to renegotiate. IOS-XR routers set their MRU to the same value as the MTU, and this message has been issued because the configured MTU is too small to meet the above condition.

Recommended Action    Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required. Note that as most Control Protocol packets are much smaller than 1500 bytes, it is unlikely that MTU values which are smaller than 1500 bytes will actually cause problems, but this cannot be guaranteed.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-UNEXPECTED_AAA_RESPONSE CH[hex]: A response with unexpected properties has been received from AAA: [chars]

Explanation    AAA has sent a response which is unexpected or malformed in the way explained in the message. The error may cause the interface to be left in what should be a transient state permanently.

Recommended Action    Check the output of 'show ppp interface' for the interface with the problem. If the interface has been left permanently in an unauthenticated state, then it can be manually cleared using the 'clear subscriber' command. Note that if the interface has come up successfully then the unexpected AAA response will probably not have caused problems.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-UNRECOGNIZED_PROTO Unrecognized IfMgr protocol [chars] on CH[hex] (caps equals [chars])

Explanation    Interface Manager notified LCP about a protocol that it doesn't recognize, either by sending a request to LCP to adopt this node or by informing LCP that it exists. This is a programming error as LCP needs to recognized all of the protocols which run above it in order to be able to run the relevant CP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_LCP-5-MTU_NEGOTIATED The PPP MTU for [chars] has been negotiated to be [unsigned int]. This is less than the configured PPP MTU of [unsigned int]

Explanation    The PPP MTU is reduced when the PPP MRU of the peer is less than the PPP MTU derived from the locally configured interface MTU. The reduced value will be used until LCP is renegotated (such as when the interface goes down and comes back up, or a new MTU is configured), or if the PPP encapsulation is removed from the interface. The MTU then returns to the configured value and another message will indicate if a value less than the configured value is negotiated again. The reduced MTU is a normal part of PPP operation and is not indicative of any problems.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-PPP_LCP-6-LOCAL_MTU_TOO_SMALL CH[hex]: Unable to complete LCP negotiations. Interface MTU on CH[hex] needs to be reconfigured taking into account the L2 headers to give an L3 MTU of at least [unsigned int]

Explanation    The peer has sent a NAK in response to the local MRRU value. The value it is suggesting for the MRRU is larger than the local bundle admin MTU, so it cannot be accepted. However, suggesting a smaller value will almost certainly lead to repeated NAKs (since the peer should be suggesting its minimum possible MRRU value), so the LCP session will be closed for a short time and then negotiations will be retried.

Recommended Action    Reconfigure the interface's MTU to a larger value, taking into account the Layer 2 headers. Once these headers have been subtracted, the Layer 3 MTU needs to be at least the value suggested in the message.

PPP_lite Messages

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_PL_DLL_ASYNC_SEND_FAIL Send async pulse to ppp lite process fails; Error [chars]

Explanation    Attempt to send pulse to PPP lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_PL_DLL_CHAN_CONNECT_FAIL Cannot connect to ppp lite process; Error [chars]

Explanation    Attempt to connect to PPP lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_lite-3-ERR_SHMEM_UNAVAILABLE PPP lite SHMEM can accommodate only [dec] records (request for [dec] records)

Explanation    PPP MA has requested transfer of more interface records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_MA Messages

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA service. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary problem communicating with the AAA server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA_ATTR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA attribute service. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resource or a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA_ATTR_IF CH[hex]: Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA attribute service for the interface specified. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resource or a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA_SESSION Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA iEDGE service. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA_SESSION_IF CH[hex]: Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA iEDGE service for the interface specified. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AIB Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with the AIB server. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the AIB server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_ATTR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with the infrastructure. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_BACKEND Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the Backend service related to use of either SysDB or SubDB. The error message describes what operation has failed and why it failed. The most likely reason for this is low memory resources or a programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_BAG Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the Bag Client library. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error. The error will affect PPP MA's ability to provide operational management data, but won't otherwise affect PPP MA's operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT_CORRUPT Corrupt [chars] checkpoint record found: [chars]

Explanation    Whilst restoring one of its checkpoint tables PPP MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's PPP session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT_DUPLICATE Duplicate [chars] checkpoint record found for [chars]

Explanation    Whilst restoring one of its checkpoint tables PPP MA found multiple entries for the same interface. PPP MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CLOCK Unexpected error encountered whilst retrieving the value of the [chars] clock: [chars]

Explanation    PPP MA encountered an error whilst retrieving the value of the realtime clock. The error message includes details of the reason for the error. This is a fatal error and the PPP MA process will abort and be restarted to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_DAPS Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the DAPS address pool service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the DAPS service, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_DAPS_IF CH[hex]: Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the DAPS address pool service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the DAPS service, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_DEBUG Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_CLOSE Error closing '[chars]' connection: [chars]

Explanation    PPP MA failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_CREATE Error creating '[chars]' connection: [chars]

Explanation    PPP MA failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, PPP MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_EVM_HANDLER Error registering for data events on '[chars]' connection: [chars]

Explanation    During initialization, PPP MA failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_GET_FD Error retrieving the Connection ID from the '[chars]' connection: [chars]

Explanation    PPP MA failed to retrieve the file descriptor associated with the specified service. This is an internal error.

Recommended Action    Consider restarting the PPP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_NOTIFY Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, PPP MA failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_OPEN Error opening '[chars]' connection: [chars]

Explanation    PPP MA failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_ATTACH Failed to register a handler for '[chars]' messages: [chars]

Explanation    PPP MA failed to register a handler for the specified class of event. This is an initialization error and implies that PPP MA will not be able to operate correctly. The PPP MA process will abort and be restarted in an attempt to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the PPP MA process. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_CREATE Error creating the PPP MA Event Manager: [chars]

Explanation    PPP MA failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_SEND Failed to send '[chars]': [chars]

Explanation    PPP MA failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the affected PPP MA process. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVQ_CREATE Error creating event queue for '[chars]': [chars]

Explanation    This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVQ_DEQUEUE Error dequeuing event for '[chars]': [chars]

Explanation    This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVQ_ENQUEUE Error queuing event for '[chars]': [chars]

Explanation    This is an unexpected error. The PPP MA process will attempt to recover by restarting. The cause may be a resource starvation problem. The error message should provide more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IMC Unexpected IfMgr error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IP_ARM Failed to [chars] [chars]: [chars]

Explanation    IPCP encountered an error using the IP-ARM API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.

Recommended Action    Restart the local ipv4_ma process and/or the ppp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IPCP_OPTS_INCONSISTENT CH[hex]: IPCP has negotiated inconsistent options: [chars]

Explanation    PPP MA has negotiated inconsistent IPCP options. The message details which options are inconsistent. IPCP will be brought up, but the inconsistencies could cause problems. The most likely reason for this is a misconfiguration, either locally or on the peer.

Recommended Action    Consider changing the relevant configuration either locally or on the peer.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IPCP_SCAN_IF CH[hex]: Failed to scan for configuration, continuing: [chars]

Explanation    PPP MA encountered an error when scanning for IPCP configuration. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB service, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IPHC Unexpected IPHC error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with IPHC MA. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the IPHC MA, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IPHC_CONFIG CH[hex]: Invalid IPHC config received: [chars]

Explanation    PPP MA received invalid or unsupported IPHC config for this interface. The error message describes which piece of config is invalid. The most likely reason for this is incorrect IPHC user configuration.

Recommended Action    Check that the IPHC user configuration is valid and supported.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_L2VPN Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with the L2VPN server. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the L2VPN server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_LAS Failed to [chars] [chars]: [chars]

Explanation    IPV6CP encountered an error using the LAS API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.

Recommended Action    Restart the local ipv6_ma process and/or the ppp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_LTRACE Unexpected error encountered whilst [chars] the [chars] buffer: [chars]

Explanation    PPP MA encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_MGD_TIMER Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_PAK Error handling pakman corruption problem: [chars]. Process exiting.

Explanation    The connection to packet manager was errored and the attempt to recover failed. Restarting the process should resolve the problem.

Recommended Action    Restart the ppp_ma process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_PLAT_PROPS Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with the Platform Properties DLL. The error message describes what operation has failed and why it failed. This will either have occurred because the Platform DLL failed to be properly initialized, or because of some error occurring in the platform dependent code.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_RIB Unexpected error encountered whilst [chars]:

Explanation    PPP MA encountered an error using the RIB client library. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the RIB, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SUBDB Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the SubDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB server, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SUBDB_IF CH[hex]: Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the SubDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SubDB server, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSDB Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the SysDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB server, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSMGR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process will abort and be restarted to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSMGR_MDR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. Sysmgr will take action to recover if appropriate. It is possible that this error has occured after MDR. If so then the recovery may require a cold reload of the card

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_THREAD Unexpected pthread error encountered for '[chars]' thread whilst [chars]: [chars]

Explanation    PPP MA encountered an unexpected error performing a pthread operation. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_THREAD_COND Unexpected condition error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an unexpected error performing a condition operation. The process may restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars]

Explanation    PPP MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_THREAD_MUTEX Unexpected mutex error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an unexpected error performing a mutex operation. The process may restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_WAVL_INIT Error initializing the WAVL tree used to store PPP MA IDBs: [chars].

Explanation    PPP MA encountered an unexpected error which prevents it from functioning. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-6-ERR_EVC_DESTROY Error destroying '[chars]' connection: [chars]

Explanation    During process termination PPP MA failed to destroy a connection to a service provided by another process. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-6-ERR_EVM_EVENT_BLOCK Error blocking waiting for an event to process: [chars]

Explanation    This is an unexpected error. The PPP MA process may recover by itself, or it may need to be restarted to recover.

Recommended Action    Restart the affected PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-6-ERR_EVQ_DESTROY Error destroying event queue for '[chars]': [chars]

Explanation    During process termination PPP MA failed to destroy an event queue. The process will terminate regardless so there should be no lasting problems.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_NETIO Messages

Error Message     
 
    
    
   

%L2-PPP_NETIO-3-ERR_INTF_INIT Failure initializing the PPP NetIO datapath for CH[hex]: [chars]%s

Explanation    The PPP NetIO DLL failed to initialize the datapath for processing PPP packets on a particular interface because of an unexpected error. The message includes the exact cause of the failure. As a result, the capsulation will be unloaded from the interface and the interface will not be able to send or receive any PPP packets. One possible reason for the error is a low memory condition, particularly if the failure was in creating the interface descriptor.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration., and then remove and reconfigure the PPP encapsulation on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_NETIO-4-ERR_INIT Failure [chars] in the PPP NetIO DLL: [chars]

Explanation    A failure occurred during an initialization operation in the PPP NetIO DLL. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-PPP_NETIO-4-PAK_DROP Dropping [chars] packet on [chars] ([chars])

Explanation    The PPP NetIO DLL has been forced to drop a packet because of an unexpected error. The error message describes the reason for the drop.

Recommended Action    The system may recover by itself. If it doesn't then the error message will recur. In this case consider restarting the NetIO process on the affected linecard. If the error messages continue after restarting NetIO then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_NETIO-5-SUBBLOCK_VERSION Incompatible subblock version during upgrade. Data has version [unsigned int], but the version supported is [unsigned int]

Explanation    When the PPP NetIO DLL was upgraded the existing data version was incompatible with the new software. NetIO will be restarted to recover the appropriate state.

Recommended Action    This is not a problem, the message is just to explain why NetIO has restarted.

PPP_SOCK Messages

Error Message     
 
    
    
   

%L2-PPP_SOCK-3-ERR_MEM_ALLOC Unable to allocate [unsigned int] bytes

Explanation    Not enough memory was available for the operation to complete.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-PPP_SOCK-3-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_SOCK-4-ERR_EVM_EVENT_BLOCK Error in event loop: [chars]

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_SOCK-4-ERR_LTRACE_INIT Failed to initialize the ltrace buffer. Error: [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-PPP_SOCK-4-ERR_PAKMAN Could not clean up and restart pakman connection. Error: [chars]. Control packet I/O will fail so restarting the socket process.

Explanation    An unknown error occurred after a pakman disconnect event. Restarting the socket process should have resolved the problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_SOCK-4-INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PPPOE_EA Messages

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_EVC_ERROR Error resetting IMP connection: [chars]

Explanation    After detecting an error with the IMP connection, PPPoE EA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_EVM_EVENT_BLOCK Error encountered in the event loop: [chars]. The PPPoE EA process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The PPPoE EA process will restart

Explanation    A failure occured during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    *REDUCE*

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_PLATFORM_INIT Failure during initialization of the platform DLL. Error [chars]. PPPoE EA needs to be restarted to recover from this error.

Explanation    The PPPoE EA Platform DLL failed to initialise. This means that PPPoE will be unable to program the hardware. This error requires a restart of the process for recovery.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPPOE_EA-4-ERR_RWMGR Unexpected error whilst [chars]: [chars]

Explanation    PPPoE EA encountered an error communicating with Rewrite Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary conne