Cisco IOS XR System Error Message Reference Guide, Release 3.8.2
Access Control List (ACL) Messages
Downloads: This chapterpdf (PDF - 353.0KB) The complete bookPDF (PDF - 49.64MB) | Feedback

Access Control List (ACL) Messages

Table Of Contents

Access Control List (ACL) Messages

APPS_ES_ACLMGR Messages

ES_ACL Messages

IP_ACL_PARSE Messages

IPV4_ACL_DP Messages

IPV4_ACL Messages

IPV6_ACL_DAEMON Messages

IPV6_ACL_LTRACE Messages

IPV6_ACL Messages

LI Messages

PFILTER_NETIO_LTRACE Messages


Access Control List (ACL) Messages


This section contains all ACL related System Error Messages.

APPS_ES_ACLMGR Messages

Error Message     
 
    
    
   

%ACL-APPS_ES_ACLMGR-7-ERROR [chars]

Explanation    This is simply a debug message. If any severe errors occur the process will exit and will be restarted by the sysmgr.

Recommended Action    None

ES_ACL Messages

Error Message     
 
    
    
   

%ACL-ES_ACL-6-ESACCESSLOGV access-list [chars] ([dec]) [chars] [hex] Outer vlan [dec] dei [dec] cos [dec] inner vlan [dec] dei [dec] cos [dec] [chars] - [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. It has both outer and inner vlan. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

IP_ACL_PARSE Messages

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-7-ERR_MEM_ALLOC Unable to allocate memory for [chars]

Explanation    Memory allocation failed, probably due to memory depletion. An entry could not be added to the cache, the associated command will be blocked by the parser.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-7-ERR_THREAD_MUTEX_LOCK Unable to lock cache mutex. Error: [chars]

Explanation    A mutex is used to protect the ACL and Prefix List caches. An attempt to lock a mutex failed with the error reported.

Recommended Action    Abort the configuration operation and restart the parser server.

IPV4_ACL_DP Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-4-DUP_NAME '[chars]' is already configured as [chars]

Explanation    The name specified in the message has already been used as the feature also specified. If you are configuring an ACL then the name has already been used as a prefix list. And, if you are configuring a prefix-list then the name has already been used as an access list.

Recommended Action    Reconfigure the feature with a different name.

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-7-INIT ipv4_acl_dipatch initialization failed at [chars] with error [chars], exiting

Explanation    ipv4_acl_dispatch initialization failed at the specified step. The error code is also displayed. If this condition occurs, the sysmgr will restart the ipv4_acl_dispatch process.

Recommended Action    None

IPV4_ACL Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-7-INIT IPv4 ACL Manager initialisation failed in function [chars]: [chars]

Explanation    The ACL manager process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the ACL manager process.

Recommended Action    None

Error Message     
 
    
    
   

%ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]

Explanation    The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]

Explanation    The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ACL_DAEMON Messages

Error Message     
 
    
    
   

%ACL-IPV6_ACL_DAEMON-7-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the IPv6 daemon if this condition happens.

Recommended Action    None

IPV6_ACL_LTRACE Messages

Error Message     
 
    
    
   

%ACL-IPV6_ACL_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars]

Explanation    ltrace_initialization_failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ACL Messages

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]

Explanation    The specified DLL could not be found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]

Explanation    The specified DLL could not be found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars]

Explanation    dlsym failed for symbol ipv6_acl_api_functions for the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars]

Explanation    dlsym failed for symbol ipv6_acl_api_functions for the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]

Explanation    there is not sufficient memory available to load the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]

Explanation    there is not sufficient memory available to load the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]

Explanation    The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]

Explanation    The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was etected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was etected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

LI Messages

Error Message     
 
    
    
   

%ACL-LI-3-ERROR [chars]: [chars]: ([dec])[chars]

Explanation    The LI Netio thread encountered the specified error while initializing the specified facility. If this error occurs, the LawfulIntercept thread will exit.

Recommended Action    None

PFILTER_NETIO_LTRACE Messages

Error Message     
 
    
    
   

%ACL-PFILTER_NETIO_LTRACE-7-INIT ltrace_init failed for '[chars]': [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the ipv4_aclmgr if this condition happens.

Recommended Action    None