Guest

Cisco IOS XR Software (End-of-Sale)

Cisco IOS XR Supported Platforms and Features, Release 3.6

  • Viewing Options

  • PDF (447.6 KB)
  • Feedback
Cisco IOS XR Supported Platforms and Features

Table Of Contents

Cisco IOS XR Supported Platforms and Features

Changes to This Document

Documentation Objectives

Audience

Introduction

Platforms

Cisco CRS-1 Router

Cisco CRS-1 16-Slot Line Card Chassis (LCC)

Cisco CRS-1 8-Slot Line Card Chassis (LCC)

Cisco CRS-1 4-Slot Line Card Chassis (LCC)

Cisco XR 12000 Series Routers

Cisco XR 12004

Cisco XR 12006

Cisco XR 12010

Cisco XR 12016

Cisco XR 12404

Cisco XR 12406

Cisco XR 12410

Cisco XR 12416

Cisco XR 12810

Cisco XR 12816

Supported Features

Obtaining Documentation, Obtaining Support, and Security Guidelines


Cisco IOS XR Supported Platforms and Features


This document provides an overview of the platforms supported by the Cisco IOS XR Software Releases  2.0, 3.0, 3.2, 3.3.0, 3.4.0, 3.5.0, and 3.6.0.

You can find the most current Cisco IOS XR software documentation on the World Wide Web at:

http://www.cisco.com/en/US/products/ps5845/tsd_products_support_series_home.html

These electronic documents may contain updates and modifications. See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section for more information on obtaining Cisco documentation.

This document contains the following sections:

Changes to This Document

Documentation Objectives

Audience

Introduction

Platforms

Supported Features

Obtaining Documentation, Obtaining Support, and Security Guidelines

Changes to This Document

Table 1 lists the technical changes made to this document since it was first printed.

Table 1 Changes to This Document 

Revision
Date
Change Summary

OL-14364-01

February 2008

Initial release of this document.


Documentation Objectives

The Cisco IOS XR Supported Platforms and Features document provides information about the features and platforms that are supported in Cisco IOS XR for this release.

Audience

This document is intended for users who design integrated routing systems that use Cisco IOS XR software.

Introduction

The Cisco IOS XR software is a distributed operating system designed for continuous system operation combined with service flexibility and speed.

For more information about the new features for this release, see Cisco IOS XR Software Release Notes. The release notes for Cisco IOS XR software are located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_release_notes_list.html

Platforms

This section provides an overview of the following platforms supported by Cisco IOS XR software:

Cisco CRS-1 Router

Cisco XR 12000 Series Routers

Table 2 lists the platforms supported by Cisco IOS XR software and the release in which the platform was first supported.

Table 2 Cisco  IOS XR Software Supported Platforms 

Supported Platform
Release 2.0
Release 3.0
Release 3.2
Release 3.3.0
Release 3.4.0
Release 3.5.0
Release 3.6.0
Cisco CRS-1 16-Slot Line Card Chassis (LCC)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Cisco CRS-1 8-Slot LCC
 

Yes

Yes

Yes

Yes

Yes

Yes

Cisco CRS-1 4-Slot LCC
       

Yes

Yes

Yes

Cisco XR 12004
         

Yes

Yes

Cisco XR 12006
     

Yes

Yes

Yes

Yes

Cisco XR 12010
     

Yes

Yes

Yes

Yes

Cisco XR 12016
     

Yes

Yes

Yes

Yes

Cisco XR 12404
   

Yes

Yes

Yes

Yes

Yes

Cisco XR 12406
   

Yes

Yes

Yes

Yes

Yes

Cisco XR 12410
   

Yes

Yes

Yes

Yes

Yes

Cisco XR 12416
   

Yes

Yes

Yes

Yes

Yes

Cisco XR 12810
       

Yes

Yes

Yes

Cisco XR 12816
       

Yes

Yes

Yes


Cisco CRS-1 Router

The Cisco CRS-1 router is a highly scalable routing platform designed for efficient service provider point-of-presence (POP) evolution as the IP network grows into a multiservices network.

The main features of all Cisco CRS-1 routing systems include:

A highly scalable service provider router with a capacity of 640 gigabits per second (Gbps) for a Cisco CRS-1 8-Slot Line Card Chassis (LCC) and 1.2 terabits per second (Tbps) for a Cisco CRS-1 16-Slot LCC of bandwidth. The Cisco CRS-1 is scalable to 92 Tbps capacity.

Supports expansion from single-chassis to multishelf systems.

A wide range of interface speeds and types (for example, OC-48 Packet-over-SONET/SDH [POS] and OC-192 POS), and a programmable modular services card (MSC) forwarding engine that provides full-featured forwarding at line-rate speeds.

Redundancy and reliability features allow nonstop operation with no single point of failure in hardware or software.

The Cisco CRS-1 8-Slot LCC uses the same line cards, the same software, and the same type of midplane and switch mechanism as the Cisco CRS-1 16-Slot LCC. It provides the higher-speed interfaces found in the Cisco CRS-1 16-Slot LCC, but in a smaller platform, allowing easier deployment in locations where power, cooling, and other facilities might be hard to provision.

The following sections provide an overview of the Cisco CRS-1 routing systems:

Cisco CRS-1 16-Slot Line Card Chassis (LCC)

Cisco CRS-1 8-Slot Line Card Chassis (LCC)

Cisco CRS-1 4-Slot Line Card Chassis (LCC)

Cisco CRS-1 16-Slot Line Card Chassis (LCC)

The Cisco CRS-1 16-Slot LCC has 16 MSC slots, each with a capacity of 40 Gbps, for a total routing capacity per chassis of 1.2 terabits. The routing system is built around a scalable, distributed three-stage Benes switch fabric and a variety of data interfaces. The data interfaces are contained on physical layer interface modules (PLIMs) mated with an associated MSC through the chassis midplane. The switch fabric cross-connects MSCs to each other.

Cisco CRS-1 8-Slot Line Card Chassis (LCC)

The Cisco CRS-1 8-Slot LCC has eight MSC slots, each with a capacity of 40 Gbps, for a total routing capacity for each chassis of 640 Gbps. The routing system is built around a scalable, distributed three-stage Benes switch fabric and a variety of data interfaces. The data interfaces are contained on PLIMs and SPA interface processors (SIPs) that mate with an associated MSC through the chassis midplane. The switch fabric cross-connects MSCs to each other.

Cisco CRS-1 4-Slot Line Card Chassis (LCC)

The Cisco CRS-1 4-Slot LCC has four MSC slots, each with the capacity of 40 Gbps, for a total routing capacity for each chassis of 320 Gbps. The routing system is built around a scalable, distributed three-stage Benes switch fabric and a variety of data interfaces. The data interfaces are contained on PLIMs and SIPs that mate with an associated MSC through the chassis midplane. The switch fabric cross-connects MSCs to each other.

Cisco XR 12000 Series Routers

The Cisco XR 12000 Series Router is powered by Cisco IOS XR software, which allows you to isolate public and private services through the virtualization of a single router into separate physical and logical partitions. Cisco IOS XR software is a unique self-healing and self-defending operating system designed for always-on operation, while scaling capacity and adding new services or features. With distributed processing intelligence and robust quality-of-service and multicast mechanisms, the Cisco XR 12000 Series Router allows you to scale services and customers with performance.

Built upon a foundation of investment protection, the Cisco XR 12000 Series Router provides fully upgradable, single-chassis platforms ranging from 2.5-Gbps to n x 10-Gbps capacity per slot.

The following sections provide an overview of Cisco XR 12000 Series Routers:

Cisco XR 12004

Cisco XR 12006

Cisco XR 12010

Cisco XR 12016

Cisco XR 12404

Cisco XR 12406

Cisco XR 12410

Cisco XR 12416

Cisco XR 12810

Cisco XR 12816

Cisco XR 12004

The Cisco XR 12004 Router is a 4-slot, 2.5-Gbps-per-slot, 1/8-rack chassis that delivers 20 Gbps of switching capacity.

Cisco XR 12006

The Cisco XR 12006 Router is a 6-slot, 2.5-Gbps-per-slot chassis that delivers 30 Gbps of switching capacity in a compact quarter-rack form factor.

Cisco XR 12010

The Cisco XR 12410 Router is a 10-slot, 2.5-Gbps-per-slot, half-rack chassis that delivers 50 Gbps of switching capacity.

Cisco XR 12016

The Cisco XR 12016 Router is a 16-slot, 2.5-Gbps-per-slot, full-rack chassis that delivers 80 Gbps of switching capacity.

Cisco XR 12404

The Cisco XR 12404 Router is a 4-slot, 10-Gbps-per-slot chassis that delivers 80 Gbps of switching capacity in a small 1/8-rack form factor.

Cisco XR 12406

The Cisco XR 12406 Router is a 6-slot, 10-Gbps-per-slot chassis that delivers 120 Gbps of switching capacity in a compact quarter-rack form factor.

Cisco XR 12410

The Cisco XR 12410 Router is a 10-slot, 10-Gbps-per-slot, half-rack chassis that delivers 200 Gbps of switching capacity.

Cisco XR 12416

The Cisco XR 12416 Router is a 16-slot, 10-Gbps-per-slot, full-rack chassis that delivers 320 Gbps of switching capacity.

Cisco XR 12810

The Cisco XR 12410 Router is a 10-slot, 40-Gbps-per-slot, half-rack chassis that delivers 800 Gbps of switching capacity.

Cisco XR 12816

The Cisco XR 12416 Router is a 16-slot, 40-Gbps-per-slot, full-rack chassis that delivers 1.28 Tbps of switching capacity.

Supported Features

This section provides information on the features supported by the Cisco IOS XR software releases.

For a list of supported software features by platform for your applicable release, see the Release Notes for Cisco IOS XR Software, located at the following URL:

http://www.cisco.com/en/US/products/ps5845/prod_release_notes_list.html 

Table 3 lists the Cisco CRS-1 hardware supported by Cisco IOS XR software, indicating in which release the hardware was first supported.

Table 4 lists the Cisco XR 12000 hardware supported by Cisco IOS XR software, indicating in which release the hardware was first supported.


Note All nodes in the Cisco CRS-1 router must always use the same installed software version. For example, if you have one node in the system using Cisco IOS XR Software Release 3.6.0, then all nodes must be upgraded to Cisco IOS XR Software Release 3.6.0. See Cisco IOS XR Getting Started Guide for software upgrade procedures.


Table 3 Cisco CRS-1 Supported Hardware 

Component
Cisco CRS-1 16-Slot LCC
Cisco CRS-1 8-Slot LCC
Cisco CRS-1 4-Slot LCC

Distributed Applications

3.3

3.3

3.4

Cisco CRS-1 16-Slot (LCC)

2.0

   

Cisco CRS-1 Fan Tray for 16-Slot LCC

2.0

   

Cisco CRS-1 16-Slot Fabric Card / Single

2.0

   

Cisco CRS-1 Fan Controller for 16-Slot LCC

2.0

   

Cisco CRS-1 16-Slot Route Processor (CRS-16-RP)

2.0

   

Cisco CRS-1 Memory Module 2 GB

2.0

   

Cisco CRS-1 PCMCIA Flash Disk 1 GB

2.0

   

Cisco CRS-1 Modular Services Card (CRS-MSC-40G, CRS-MSC-20G)

2.0

3.0

3.4

Cisco CRS-1 LCC Front AC Power Panel

2.0

   

Cisco CRS-1 LCC Front DC Power Panel

2.0

   

Cisco CRS-1 16-Slot Alarm Board

2.0

   

Cisco CRS-1 AC Delta Power Shelf for 16-Slot LCC

2.0

   

Cisco CRS-1 AC Wye Power Shelf for 16-Slot LCC

2.0

   

Cisco CRS-1 DC Power Shelf for 16-Slot LCC

2.0

   

Cisco CRS-1 4xOC-192/STM64 POS/DPT Interface Module/VS

2.0

3.0

3.4

Cisco CRS-1 4xOC-192/STM64 POS/DPT Interface Module/SR

2.0

3.0

3.4

Cisco CRS-1 4xOC-192/STM64 POS/DPT Interface Module/IR

2.0

3.0

3.4

Cisco CRS-1 4xOC-192/STM64 POS/DPT Interface Module/LR

2.0

3.0

3.4

Cisco CRS-1 16xOC-48/STM16 POS/DPT Interface Module

2.0

3.0

3.4

Cisco CRS-1 2.5 G SFP LR Optic

2.0

   

Cisco CRS-1 2.5 G SFP SR Optic

2.0

   

Cisco CRS-1 LCC Front Doors

2.0

   

Cisco CRS-1 LCC Front Cable

2.0

   

Cisco CRS-1 LCC Expanded Front Cable Management

2.0

   

Cisco CRS-1 LCC Rear Cable Management

2.0

   

Cisco CRS-1 LCC Rear Doors

2.0

   

Cisco CRS-1 Lift for LCC 16 and FCC

2.0

   

Cisco CRS-1 8-Slot LCC

 

3.0

 

Cisco CRS-1 Fan Tray for 8-Slot LCC

 

3.0

 

Cisco CRS-1 LCC Filter Pack

 

3.0

 

Cisco CRS-1 AC Pwr Rectifier for 8-Slot LCC

 

3.0

 

Cisco CRS-1 DC Power Entry Module for 8-Slot LCC

 

3.0

 

Cisco CRS-1 AC and DC Power Module Filter for 8-Slot LCC

 

3.0

 

Cisco CRS-1 AC Delta PDU for CRS-8 LCC

 

3.0

 

Cisco CRS-1 AC Wye PDU for CRS-8 LCC

 

3.0

 

Cisco CRS-1 DC PDU for CRS-8 LCC

 

3.0

 

Cisco CRS-1 8-Slot Fabric Card / Single

 

3.0

 

Cisco CRS-1 8-Slot Fabric Card Blank

 

3.0

 

Cisco CRS-1 8-Slot Fabric Handle

 

3.0

 

Cisco CRS-1 8-Slot Route Processor

 

3.0

 

Cisco CRS-1 8-Slot Route Processor Blank

 

3.0

 

Cisco CRS-1 8-Slot Route Processor Handle

 

3.0

 

Cisco CRS-1 8x10 GbE Interface Module PLIM

3.0

3.0

3.4

CRS-XENPAK10GB-LR

3.0

3.0

3.4

Cisco CRS-1 1xOC-768/STM256 POS Interface Module/SR PLIM

3.0

3.0

3.4

Cisco CRS-1 Fabric Card Chassis (FCC)

3.2

   

Cisco CRS-1 Series SPA Interface Processor 40G (CRS-SIP-800)

3.2

3.2

3.4

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with XFP Optics

3.2

3.2

3.4

Cisco 8-Port Gigabit Ethernet Shared Port Adapter

3.2

3.2

3.4

Cisco 4-Port OC-3 Shared Port Adapter

3.2

3.2

3.4

Cisco CRS-1 16-Slot Route Processor, Revision B (CRS-16-RP-B)

3.3

   

Cisco CRS-1 4x10G PLIM DWDM (4-10GE-ITU/C)

3.3

3.3

3.4

Cisco CRS-1 1x40G PLIM DWDM (1OC768-ITU/C)

3.3

3.3

3.4

Cisco CRS-1 8x OC12/3 POS Interface Module SPA

3.3

3.3

3.4

Cisco CRS-1 Multi-Chassis, 2 LCC + 1 FCC (2+1)

3.3.1

   

Cisco CRS-1 Multi-Chassis, 2 LCC + 4 FCC (2+4)

3.3.1

   

Cisco CRS-1 4-Slot LCC

   

3.4

DPT support on OC192 and OC48 PLIM

3.4

3.4

3.4

Cisco CRS-1 5-Port Gigabit Ethernet SPA, Version 2

3.4

3.4

3.4

Cisco CRS-1 8-Port Gigabit Ethernet SPA, Version 2

3.4

3.4

3.4

Cisco CRS-1 10-Port Gigabit Ethernet SPA, Version 2

3.4

3.4

3.4

Cisco CRS-1 1-Port 10 Gigabit Ethernet SPA, Version 2

3.4

3.4

3.4

Cisco CRS-1 2-Port OC48c/STM-16c POS/RPR SPA, Version 2

3.4

3.4

3.4

Cisco CRS-1 4-Port OC48c/STM-16c POS/RPR SPA, Version 2

3.4

3.4

3.4

XENPAK-10GB-LR+

3.4

3.4

3.4

XENPAK-10GB-ER+

3.4

3.4

3.4

Cisco CRS-1 Fabric Chassis Integrated Switch Controller Card (CRS-FCC-SC-22GE)

3.4.1

   

Cisco CRS-1 Distributed Route Processor B CPU Module (CRS-DRP-B-CPU)

3.4.1

3.4.1

3.4.1

Cisco CRS-1 Distributed Route Processor B PLIM Module (CRS-DRP-B-PLIM)

3.4.1

3.4.1

3.4.1

Cisco CRS-1 4-Port T3/E3 Serial SPA

3.4.1

3.4.1

3.4.1

Cisco CRS-1 1-Port OC192/STM 64 POS/RPR SPA VSR Optics

3.4.1

3.4.1

3.4.1

Cisco CRS-1 1x10 GEv2 WAN/LAN PHY SPA

3.5.2

3.5.2

3.5.2

Cisco CRS-1 Multi-Chassis, 4LCC + 4 FCC (4+4)

3.6.0

   

40G DPSK IPoDWDM PLIM

3.6.0

3.6.0

3.6.0

CRS-1 Modular Services Card B (CRS-MSC-40G-B and CRS-MSC-20G-B)

3.6.0

3.6.0

3.6.0


Table 4 Cisco XR 12000 Supported Hardware 

Component
Cisco XR 12000

Cisco XR 12000 Series 12004 Chassis

3.5.0

Cisco XR 12000 Series 12006 Chassis

3.3

Cisco XR 12000 Series 12010 Chassis

3.3

Cisco XR 12000 Series 12016 Chassis

3.3

Cisco XR 12000 Series 12404/80 Chassis

3.2

Cisco XR 12000 Series 12406/120 Chassis AC Power

3.2

Cisco XR 12000 Series 12406/120 Chassis DC Power

3.2

Cisco XR 12000 Series 12410/200 Chassis

3.2

Cisco XR 12000 Series 12416/320 Chassis

3.2

Cisco XR 12000 Series 12810 Chassis

3.4

Cisco XR 12000 Series 12816 Chassis

3.4

Cisco XR 12000 Series Performance Route Processor 2

3.2

Cisco 12000 Series 40 GB Hard Drive Option

3.2

Cisco 12000 Series 4xOC12c/STM4c POS Rev B

3.2

Cisco 12000 Series 16xOC3c/STM1c POS Rev B

3.2

Cisco 12000 Series 16xOC3c/STM1c POS

3.2

Cisco 12000 Series 8xOC3c/STM1c POS

3.2

Cisco 12000 Series 4xOC3c/STM1c POS

3.2

Cisco 12000 Series 1xOC48c/STM16c POS

3.2

Cisco 12000 Series 4xGE

3.2

Cisco 12000 Series Multirate SPA Interface Processor (SIP)

3.3

Cisco 12000 Series Packet Service Card (PSC-1)

3.3

Cisco 12000 Series High Speed SPA Interface Processor (SIP)

3.2

Cisco 12000 Series SPA (2x) 4xCT3

3.3

Cisco 12000 Series SPA (2x) 4cT3/E3

3.3

Cisco 12000 Series SPA 8xFE TX

3.3

Cisco 12000 Series SPA 2xOC48

3.3

Cisco 12000 Series SPA-1xOC48 POS/RPR

3.5.0

Cisco 12000 Series SPA-2xOC12 POS

3.5.0

Cisco 12000 Series SPA-4xOC12 POS

3.5.0

Cisco 12000 Series SPA-8xOC12 POS

3.5.0

Cisco 12000 Series SPA-4xOC3 POS-V2

3.5.0

Cisco 12000 Series SPA-8xOC3 POS

3.5.0

Cisco 12000 Series SPA-8xCHT1/E1

3.6.0

Cisco 12000 Series SPA-1CHSTM1/OC3

3.5.0

Cisco 12000 Series SPA-1xCHOC12/DS0

3.5.0

Cisco 12000 Series SPA ATM 1xOC12

3.6.0

Cisco 12000 Series SPA ATM 1xOC3

3.6.0

Cisco 12000 Series SPA ATM 3xOC3

3.6.0

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with VSR Optics

3.2

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with LR Optics

3.2

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with XFP Optics

3.2

Cisco 5-Port Gigabit Ethernet Shared Port Adapter

3.2

Cisco 10-Port Gigabit Ethernet Shared Port Adapter

3.2

Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter

3.2

Enhanced 800-Gbps Fabric Option (5xSFC and 2xCSC) for 128101

3.4

Enhanced 800-Gbps Fabric Kit (5xSFC and 2xCSC) for 128102

3.4

Enhanced 1280-Gbps Fabric Option (3xSFC and 2xCSC) for 128163

3.4

Enhanced 1280-Gbps Fabric Kit (3xSFC and 2xCSC) for 128164

3.4

Cisco 5-Port Gigabit Ethernet SPA, Version 2

3.4

Cisco 8-Port Gigabit Ethernet SPA, Version 2

3.4

Cisco 8-Port 10BASE-T/100BASE-TX Fast Ethernet SPA, Version 2

3.4

Cisco 10-Port Gigabit Ethernet SPA, Version 2

3.4

Cisco 1-Port Ten Gigabit Ethernet SPA, Version 2

3.4

Cisco 8-Port 10BASE-T/100BASE-TX Fast Ethernet SPA, Version 2

3.4

IPSEC Shared Port Adapter with 2 Gbps DES/3DES/AES

3.4

Cisco 12000 Multi-Service Blade

3.4

Cisco 12000 Series 4-Port OC-3c/STM-1c ATM ISE Line Card, multimode

3.4

Cisco 12000 Series 4-Port OC-3c/STM-1c ATM ISE Line Card, single-mode

3.4

4-port OC-12/STM-4 ATM multimode ISE line card with SC connector

3.4

4-port OC-12/STM-4 ATM single-mode, intermediate-reach ISE line card with SC Connector

3.4

10G and 2.5G enhanced fabric card support on Cisco XR 12000, Cisco XR 12004 and Cisco XR 120065

3.6.0

Channelized OC48 SPA support: SPA-1XCHOC48/DS3

3.6.0

Channelized T1/E1SPA support: SPA-8XCHT1/E1

3.6.0

1 This Fabric option can be configured only in the enhanced Cisco XR12000 10-slot Router with part number XR12000/10.

2 This Fabric kit can used to upgrade the switching capacity to 40G/slot in the enhanced Cisco XR12000 10-slot router with part number XR12000/10.

3 This Fabric option can be configured only in the enhanced Cisco XR12000 16-slot router with part number XR12000/16.

4 This Fabric kit can used to upgrade the switching capacity to 40G/slot in the enhanced Cisco XR 12000 16-slot router with part number XR 12000/16.

5 Only basic fabric switching functionality is supported. Single-router APS, BITS, and Dual Priority features are planned for future releases.


Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

OL-14364-01