Guest

Cisco IOS XR Software (End-of-Sale)

About Cisco IOS XR Software Documentation, Release 3.5

  • Viewing Options

  • PDF (409.5 KB)
  • Feedback
About Cisco IOS XR Software Documentation, Release 3.5

Table Of Contents

About Cisco IOS XR Software Documentation, Release 3.5

Changes to This Document

Documentation Objectives

Audience

Organization of the Cisco IOS XR Software Release  Documentation

Master Index

Documents

Command References

Configuration Guides

Craft Works Interface Documents

Supporting Documents

Document Conventions

Obtaining Documentation, Obtaining Support, and Security Guidelines


About Cisco IOS XR Software Documentation, Release 3.5


This document describes the Cisco IOS XR software documentation and its objectives, audience, organization, and conventions. It also provides sources for obtaining documentation, technical assistance, and additional publications and information from Cisco Systems. The document sections are:

Changes to This Document

Documentation Objectives

Audience

Organization of the Cisco IOS XR Software Release  Documentation

Command References

Configuration Guides

Craft Works Interface Documents

Supporting Documents

Document Conventions

Obtaining Documentation, Obtaining Support, and Security Guidelines

Changes to This Document

Table 1 Changes to This Document 

Revision
Date
Change Summary

OL-12292-01

June 2007

Initial release of this document.


Documentation Objectives

Cisco IOS XR software documentation describes the tasks and commands that are necessary to configure and maintain a router that is using Cisco IOS XR software.

Audience

The Cisco IOS XR software documentation is intended primarily for users who configure and maintain routers but who might be unfamiliar with the tasks, relationship between tasks, or Cisco IOS XR software commands necessary to perform particular tasks. The Cisco IOS XR software documentation is also for users who are experienced with Cisco IOS XR software and need to know about new features, configuration options, and characteristics of Release 3.5.0 software.

Organization of the Cisco IOS XR Software Release  Documentation

The Cisco IOS XR documentation set provides configuration guides, command references, and other supporting documents. It differs from other Cisco software major releases in these respects:

Documents are delivered online, in PDF and HTML formats, and are not orderable as printed books.

Cisco IOS XR Release 3.5.0 provides online documents for each technology area.

All command references present commands in alphabetic order.

Master Index

The master index of command-line interface (CLI) commands is an online index through which you can navigate and find the description of a CLI command. The master index is linked to the command references and provides a quick way for you to find a command when you know the command name.

Documents

The following types of documents support Cisco IOS XR Software Release 3.5.0:

Command References

Configuration Guides

Craft Works Interface Documents

Supporting Documents

Command References

The following command references support Cisco IOS XR software.

Table 2 Command References

Document Title
Description

Cisco IOS XR Advanced System Command Reference

This reference has command syntax and usage guidelines for the following areas: ASIC drivers, troubleshooting, fabric management, tech-support command output, and watchdog.

Cisco IOS XR Interface and Hardware Component Command Reference

This reference provides command syntax and usage guidelines for the commands you use to configure physical and virtual interfaces and additional hardware component types. This document also includes commands that apply to Packet over SONET (POS)—which includes Synchronous Digital Hierarchy (SDH)—SONET/SDH, automatic protection switching (APS), Ethernet, null and loopback virtual interfaces, Tunnel-IPSec (but not Tunnel-TE, which is covered in Cisco IOS XR MPLS Command Reference), VLANs, bidirectional forwarding detect (BFD), BFD over VLAN bundles (on Cisco IOS XR in the current release), Netflow, and dense wave-division multiplexing (DWDM). This command reference also describes the commands that apply to the shared port adapter (SPA) and the SPA interface processor (SIP).

Cisco IOS XR Interface and Hardware Component Debug Command Reference

This reference describes the commands you can use to debug interface and hardware components.

Cisco IOS XR IP Addresses and Services Command Reference

This reference provides command syntax and usage guidelines for the commands for the following technologies: Address Resolution Protocol (ARP), access control lists (ACLs), Cisco Express Forwarding (CEF), Dynamic Host Configuration Protocol (DHCP), local packet transport services (LPTS), network IPv4 and IPv6 stacks, prefix lists, quality of service (QoS), and transport stacks.

Cisco IOS XR IP Addresses and Services Debug Command Reference

This reference describes the commands you can use to debug the IP addresses and services features.

Cisco IOS XR Modular Quality of Service Command Reference

This reference describes the commands used to display and configure quality of service (QoS) in Cisco IOS XR software.

Cisco IOS XR Modular Quality of Service Debug Command Reference

This reference describes the commands you can use to debug the QoS software components.

Cisco IOS XR Multicast Command Reference

This reference provides command syntax and usage guidelines for the multicast routing protocols that include Protocol Independent Multicast (PIM), Internet Group Management Protocol (IGMP), and Multicast Source Discovery Protocol (MSDP).

Cisco IOS XR Multicast Debug Command Reference

This reference describes commands you can use to debug multicast facilities.

Cisco IOS XR Multiprotocol Label Switching Command Reference

This reference provides command syntax and usage guidelines for the following Multiprotocol Label Switching (MPLS) facilities: Label Distribution Protocol (LDP), MPLS Resource Reservation Protocol (RSVP), MPLS Forwarding, MPLS Traffic Engineering (MPLS-TE), Generalized MPLS (GMPLS), and MPLS Optical-UNI (MPLS O-UNI).

Cisco IOS XR Multiprotocol Label Switching Debug Command Reference

This reference describes the commands you can use to debug MPLS features and facilities.

Cisco IOS XR Routing Command Reference

This reference provides command syntax and usage guidelines to configure and monitor Border Gateway Protocol (BGP), Intermediate System-to-Intermediate System (IS-IS), Open Shortest First Path (OSPF), Open Shortest First Path Version 3 (OSPFv3), Enhanced Interior Gateway Routing Protocol (EIGRP), Routing Information Protocol (RIP), Routing Information Base (RIB) routing protocols, and static routing.

Cisco IOS XR Routing Debug Command Reference

This reference describes the commands you can use to debug the various routing protocols.

Cisco IOS XR Session Border Controller Command Reference

This reference provides command syntax and usage guidelines for Session Border Controller (SBC) applications.

Cisco IOS XR Session Border Controller Debug Command Reference

This reference describes the commands you can use to debug the SBC software components.

Cisco IOS XR System Management Command Reference

This reference has command syntax and usage guidelines for the following: software package management, Network Time Protocol (NTP), process management, memory management, terminal services, secure domain router (SDR), hardware redundancy and node administration, Cisco Discovery Protocol (CDP), SNMP server, boot, clock, configuration management, distributed route processor (DRP), file system, manageability, and software entitlement.

Cisco IOS XR System Management Debug Command Reference

This reference describes the commands you can use to debug the System Manager.

Cisco IOS XR System Monitoring Command Reference

This reference has command syntax and usage guidelines for the following: alarm logs and logging correlation, IP Service Level Agreements (IP SLAs), fault management, logging services, performance management, OnBoard Fault Logging (OBFL), and statistics services.

Cisco IOS XR System Security Command Reference

This reference provides command syntax and usage guidelines for the following areas: Internet Key Exchange (IKE); IP Security (IPSec); Public Key Infrastructure (PKI); Secure Shell (SSH); Secure Socket Layer (SSL); authentication, authorization, and accounting (AAA); Software Authentication Manager (SAM); and secret keys and keychain management.

Cisco IOS XR System Security Debug Command Reference

This reference describes the commands you can use to debug the System Security software components.

Cisco Virtual Firewall Command Reference

This reference provides command syntax and usage guidelines for the two command sets that support the Virtual Firewall (VFW) feature: Cisco IOS XR and SanOS (Linux).


Configuration Guides

The following configuration guides support Cisco IOS XR software:

Table 3 Configuration Guides

Document Title
Description

Cisco IOS XR Interface and Hardware Component Configuration Guide

This guide provides interface configuration and management information and describes a variety of global interfaces: Packet over SONET (POS)—which also applies to Synchronous Digital Hierarchy (SDH)—SONET/SDH, automatic protection switching (APS), Ethernet, null and loopback virtual interfaces, Tunnel-IPSec (but not Tunnel-TE, which is covered in Cisco IOS XR MPLS Configuration Guide), VLANs, Bidirectional Forwarding Detection (BFD), BFD over VLAN bundles (on Cisco IOS XR in the current release), and management. It contains the information on how to configure the shared port adapter (SPA) and the SPA interface processor (SIP). SIPs and SPAs are carrier cards and port adapters that increase modularity, flexibility, and scalability across the Cisco Systems routers. This document also includes configuration guidance for using Netflow and dense wave-division multiplexing (DWDM).

Cisco IOS XR IP Addresses and Services Configuration Guide

This guide provides concepts and configuration tasks for the following technologies: ARP, access control lists (ACLs), Cisco Express Forwarding (CEF), DHCP, local packet transport service (LPTS), network IPv4 and IPv6 stacks, prefix lists, QoS, and transport stacks.

Cisco IOS XR Modular Quality of Service Configuration Guide

This guide describes the Cisco IOS XR Quality of Service (QoS) feature for prioritizing traffic flows and providing preferential forwarding for higher-priority packets. The QoS techniques described include allocating bandwidth, improving loss characteristics, avoiding and managing network congestion, metering network traffic, and setting traffic-flow priorities across the network.

Cisco IOS XR Multicast Configuration Guide

This guide provides concepts and configuration tasks for the following technologies: PIM, IGMP, and MSDP.

Cisco IOS XR Multiprotocol Label Switching Configuration Guide

This guide provides concepts and configuration tasks for the following Multiprotocol Label Switching (MPLS) facilities: Label Distribution Protocol (LDP), MPLS Resource Reservation Protocol (RSVP), MPLS Forwarding, MPLS Traffic Engineering (MPLS-TE), and MPLS Optical-UNI (MPLS O-UNI).

Cisco IOS XR Routing Configuration Guide

This guide provides concepts and configuration tasks for the following technologies: BGP, EIGRP, IS-IS, OSPF, RIP, RIB protocols, routing policy language, and static routing.

Cisco IOS XR Session Border Controller Configuration Guide

This guide describes the tasks that support Session Border Controller (SBC) applications.

Cisco IOS XR System Management Configuration Guide

This guide provides configuration tasks and describes concepts for managing the following: upgrading and managing Cisco IOS XR software packages, upgrading field-programmable devices (FPD) software, Network Time Protocol (NTP), process placement, physical and virtual terminals, secure domain routers (SDR), managing the router hardware, Cisco Discovery Protocol (CDP), SNMP, and software entitlement.

Cisco IOS XR System Monitoring Configuration Guide

This guide has configuration tasks and concepts for the following technologies: alarm logs and logging correlation, IP Service Level Agreements (IP SLAs), fault management, logging services, performance management, and OnBoard Fault Logging (OBFL)

Cisco IOS XR System Security Configuration Guide

This guide provides concepts and configuration tasks for the following technologies: IKE, IPSec, PKI, SSH, SSL, AAA, keychain management, and SAM. It also defines a task ID and provides guidance on the use of task IDs for commands that require them.

Cisco Virtual Firewall Configuration Guide

This guide describes the tasks that support creating, monitoring, and maintaining a Virtual Firewall (VFW).


Craft Works Interface Documents

The following Craft Works Interface documents support Cisco IOS XR software:

Cisco Craft Works Interface Quick Start Guide—This guide provides a brief overview of the Craft Works Interface (CWI) and describes procedures for setting up the router and CWI and for establishing a connection between the CWI and the router.

Cisco Craft Works Interface User Guide—This guide shows you how to use CWI to manage Cisco devices. CWI provides a user-friendly interface that combines graphical, spreadsheet, text editing, and command-line interface (CLI) features to manage Cisco devices.

Supporting Documents

The following documents support the Cisco IOS XR software documentation:

Table 4 Supporting Documents

Document Title
Description

Accessing Cisco IOS XR Software Release Notes

This document provides instructions to find release notes for Cisco IOS XR software.

Cisco CRS-1 Carrier Routing System Multishelf Upgrade and Conversion Guide, R3.5

This guide describes the software aspects of upgrading from a single-shelf Cisco CRS-1 router to a multishelf Cisco CRS-1 router.

Cisco IOS XR Diagnostics

This document describes how to configure and run the online and offline field diagnostics. These diagnostics can contribute to high network availability by allowing you to test and verify hardware operation in a live, operational network.

Cisco IOS XR Getting Started Guide

This guide provides an introduction to the
Cisco IOS XR software command-line interface (CLI) and describes the initial router configuration tasks for standalone and multishelf routers.

Cisco IOS XR ROM Monitor Guide

This guide presents configuration information and examples for using the ROM Monitor mode of the Cisco IOS XR software, including the following subjects: ROM Monitor overview and basic procedures, router recovery with ROM Monitor, managing configuration files in ROM Monitor, password recovery in ROM Monitor Mode, upgrading and downgrading ROM Monitor software on CRS-1, and upgrading and downgrading boothelper and ROM Monitor software on Cisco XR 12000 Series Routers.

Cisco IOS XR Supported Platforms and Features

This document provides an overview of the platforms and software supported for this release.

Cisco IOS XR Troubleshooting

This guide provides instructions for troubleshooting the Cisco CRS-1 and Cisco XR 12000 Series Routers using Cisco IOS XR software and includes the following subjects: booting, forwarding, router switch fabric, interfaces, memory, control plane Ethernet network, and process monitoring.

Cisco IOS XR XML API Guide

This guide explains how to use the Cisco XML API to configure routers or request information about configuration, management, or operation of the routers.

Converting Cisco IOS Configurations to Cisco IOS XR Configurations

This document describes how to convert Cisco IOS configuration to a Cisco IOS XR configuration.

Migrating from Cisco IOS to Cisco IOS XR Software on the Cisco XR 12000 Series Router

This guide describes how to migrate from
Cisco IOS software to Cisco IOS XR software on the Cisco XR 12000 Series Router.

Release Notes for Cisco IOS XR Software Release 3.5

These release notes describe new, changed, and unique characteristics of this release.

Using Debug Commands on Cisco IOS XR Software, Release 3.5

This document describes how to use the Cisco IOS XR software debug commands to monitor system operations and troubleshoot errors.


Document Conventions

Cisco IOS XR documentation uses the following conventions:

Convention
Description

^ or Ctrl

The ^ and Ctrl symbols represent the Control key. For example, the key combination ^D or Ctrl-D means hold down the Control key while you press the D key. Keys are indicated in capital letters but are not case sensitive.

string

A string is a nonquoted set of characters shown in italics. For example, when setting an SNMP community string to public, do not use quotation marks around the string or the string will include the quotation marks.


Command syntax descriptions use the following conventions:

Convention
Description

bold

Bold text indicates commands and keywords that you enter literally as shown.

italics

Italic text indicates arguments for which you supply values.

[x]

Square brackets enclose an optional element (keyword or argument).

|

A vertical line indicates a choice within an optional or required set of keywords or arguments.

[x | y]

Square brackets enclose keywords or arguments separated by a vertical line to show optional choices.

{x | y}

Braces enclosing keywords or arguments separated by a vertical line indicate a required choice.


Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:

Convention
Description

[x {y | z}]

Braces and a vertical line within square brackets indicate a required choice within an optional element.


Examples use the following conventions:

Convention
Description
screen

Examples of information displayed on the screen are set in Courier font.

bold screen

Examples of text that you must enter are set in Courier bold font.

<     >

Angle brackets enclose text that is not printed to the screen, such as passwords.

!

An exclamation point at the beginning of a line indicates a comment line. (Exclamation points are also displayed by the Cisco IOS XR software for certain processes.)

[     ]

Square brackets enclose default responses to system prompts.


The following conventions are used to attract the attention of the reader:


Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.


Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.



Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.


Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Text Part Number: OL-12292-01