Cisco IOS XR System Error Message Reference Guide, Release 3.5
Forwarding Messages
Downloads: This chapterpdf (PDF - 427.0KB) The complete bookPDF (PDF - 18.83MB) | Feedback

Forwarding Messages

Table Of Contents

Forwarding Messages

FIB Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_L2HAL Messages

HAL_PDFIB Messages

IP_TUNNEL_MA_LTRACE Messages

IP_TUNNEL Messages

IPT_EA_LTRACE Messages


Forwarding Messages


This section contains all CEF and FIB related System Error Messages. The following facility codes are represented in this module:

FIB Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_L2HAL Messages

HAL_PDFIB Messages

IP_TUNNEL_MA_LTRACE Messages

IP_TUNNEL Messages

IPT_EA_LTRACE Messages

FIB Messages

Error Message     
 
    
    
   

%FORWARDING-FIB-2-INIT FIB initialization failure: [chars] [chars]

Explanation    FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-INVALID_MSG FIB thread [chars] received an invalid message: [chars] [unsigned int]

Explanation    FIB thread got an invalid message so it is exiting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-OOR CEF has run out of [chars] resource memory. No more route updates will be handled by the CEF. Please delete routes, and then clear the cef on this node to resume normal operation

Explanation    The fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted and customer does a clear cef on the node.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Significant routes will have to be deleted followed by a clear cef on the affected node to resume normal cef operation.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-OOR_TBL CEF has run out of table resource memory. This table [hex] could not be created. Please check the memory on the card and then recreate/reconfigure the table when enough memory is available

Explanation    The fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes/tables are deleted and customer does a recreate of the table.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Significant routes/tables will have to be deleted followed by a reconfiguration of the table.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-PFI_IFH_RECYCLE PFI Notif [hex] for ifh=[hex] w type=[hex] : type=[hex]

Explanation    An update from Packet Forwarding Infrastructure for an interface was received claiming it to be a dfferent type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-PROTO_INIT FIB [chars] protocol initialization failure: [chars] [chars] ([unsigned int])

Explanation    FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-SHMRESET resetting shared memory for [chars]

Explanation    FIB Mgr has crashed repeatedly that exceeds threshold, resetting the shared memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-STATE FIB startup state [chars] failure: [chars] [unsigned int]

Explanation    FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-2-THREAD_INIT FIB thread [chars] initialization failure: [chars] [chars] ([unsigned int])

Explanation    FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-ADJ_INIT FIB initialization with the AIB failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with AIB.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR can be tried as well.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-ATTRIBUTE Attribute operation failed during [chars]: for [chars] ([dec], [chars])

Explanation    An internal software error occurred that prevented the FIB from working with attributes.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-BCDL BCDL failed during [chars] for group [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with BCDL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-CLIENT_ERROR [chars] [chars]

Explanation    A FIB client behaved erroneously or there was an unexpected state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-DEFAULT_ROUTE_CREATE_FAIL Default rolute creation failed [chars]

Explanation    A route update was skipped because of an internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-DUMMY_ZERO_ERR Error while attempting to restore dummy real zero: [hex] [chars]

Explanation    Cannot restore the dummy real zero route to its original state

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-DUMMY_ZERO_REMOVE Removing ing dummy real zero because of error: [hex] [chars]

Explanation    Forced to delete because cannot restore the dummy real zero because of error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-GEN_ERR FIB internal error: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-GTRIE GTRIE failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with the tries.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-IDB IDB operation for ifh:[hex] failed during [chars]: ([dec], [chars])

Explanation    An internal software error occurred for an IDB action.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-INIT_GR_EXIT_TOUT Timed-out on graceful exit for init failure, exiting ungracefully

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-INTERNAL_ERR An internal processing error/illegal state detected

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-MALLOC_FAILED Heap memory allocation failed from - '[chars]'

Explanation    FIB couldn't allocate memory for some internal processing. It might be in consistent state.

Recommended Action    Check memory utilization on the card the error came for and take appropriate steps to reduce it.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-PD_FAIL [chars]

Explanation    This is a catch all PD errors.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-PLATF_UPD_FAIL Platform upd failed: Obj=[chars][ptr=[pointer],refc=[hex],flags=[hex]] Action=[chars] Proto=[chars]. Cerr=[chars]

Explanation    This is a catch all Platform update errors during development phase.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-RCC_NO_TABLE route check to the fib failed table [hex], protocol [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from completing the route check.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-RECURSIVE_LOOP [chars]

Explanation    This is to catch recursive loops.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-RETRY retry module failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from retrying a failed operation.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-ROUTE route update for [chars] (table [hex]) to the fib failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with route updates.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-ROUTE_GEN [chars]: [chars]

Explanation    An internal software error occurred during route handling.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-SHM shared memory failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with shared memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-TABLE table operation failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working with multiple tables.

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%FORWARDING-FIB-3-TIMER Timer module failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB handling timers.

Recommended Action    Try restarting the fib process to see if the route gets programmed again. LC OIR or clear route * can be tried as well.

Error Message     
 
    
    
   

%FORWARDING-FIB-4-PFI_IFH_CONN fail to connect to PFI_IFH [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-4-PULSE_HNDLR FIB received unidentifiable pulse: proto [unsigned int], opc [unsigned int]

Explanation    FIB received a pulse that could not be identified.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FIB-4-RSRC_LOW CEF running low on [chars] resource memory. CEF will now begin resource constrained forwarding. Only route deletes will be handled in this state, which may result in mismatch between RIB/CEF. Traffic loss on certain prefixes can be expected. The CEF will automatically resume normal operation, once the resource utilization returns to normal level

Explanation    The fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has enterred resource contrained forwarding mode. In this mode, the cef will only handle route deletes which may potentially freeup some memory. Due to this operational mode, the CEF/RIB will be out of sync. Once routes are deleted and resource utilization level drops to acceptable levels again, cef will come out of this operational mode and resume normal operation.

Recommended Action    Run show cef resource command and check which resource(s) are running low on memory. Any action that reduces number of routes for this protocol (results in route delete events to free up resources below predefined level) will eventually result in the cef returning to normal operation after few seconds.

Error Message     
 
    
    
   

%FORWARDING-FIB-5-ROUTE_UPDATE_DROP [chars]

Explanation    An internal software error occurred and FIB had to throw away a route update

Recommended Action    Try restarting the fib process to see if the problem goes away.

Error Message     
 
    
    
   

%FORWARDING-FIB-6-HARD_RESET [chars]

Explanation    FIB is restarting with a reset of it's shared memory to possibly recover from an unrecoverable state

Recommended Action    None

Error Message     
 
    
    
   

%FORWARDING-FIB-6-RSRC_OK CEF resource state has returned to normal. CEF has exited resource constrained operation and normal forwarding has been restored

Explanation    The fib_mgr process had previously detected that the hardware,software resources required for cef operation were running low, and had enterred resource constrained forwarding. Now resources have been restored and cef has resumed normal operation.

Recommended Action    None.

FWD_EDGE_ADJ Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_EDGE_ADJ-2-EDGE_ADJ_ERR GSR edge adj dll layer internal error [chars] : [chars]

Explanation    A runtime error occurred in GSR adj's egine layer. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_HAL Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]

Explanation    A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ADJ_ERR GSR adj internal error: [chars]

Explanation    A runtime error occurred in GSR adj module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]

Explanation    A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ECD_ERR GSR ECD internal error: [chars]

Explanation    A runtime error occurred in GSR ecd module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ECD_TRKR_ERR GSR ECD internal error: [chars]

Explanation    A runtime error occurred in GSR ecd tracker module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-FASTCONV_CLI_ERR FastConvergence CLI: [chars], error: [chars]

Explanation    A runtime error occurred while apply the Fast convergence CLI. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-HW_OCE_NULL [chars] - GSR HAL internal error: hal object ([chars]) getting a NULL hw_oce

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-INIT [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initalizing GSR Hardware Abstraction Layer (HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-INVALID_PARENT_OBJ GSR FIB internal error: [chars] failed to get parent [chars] obj - [chars]

Explanation    A runtime error occurred in GSR FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-LDI_ERR GSR loadinfo internal error: [chars]

Explanation    A runtime error occurred in GSR loadinfo module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-PFX_ERR GSR prefix internal error: [chars]

Explanation    A runtime error occurred in GSR prefix module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]

Explanation    A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_INTF_REGISTER Failed to register interface [hex] with Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to register the specified interface with Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_INTF_UNREGISTER Failed to unregister interface [hex] from Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to unregister the specified interface from Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_VALIDATION Stats validation error: [chars] ([dec]): [chars]

Explanation    A validation error occurred while doing an LSP/TE statistics operation. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-TUNNEL_NH_ERR GSR l3VPNOIP internal error: [chars]

Explanation    A runtime error occurred in GSR L3VPNOIP module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources

Explanation    The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-USED_BY_BGP_STATUS_CHANGE Used by BGP status changed from [chars] to [chars] on obj 0x[pointer]

Explanation    Used by BGP status on the loadinfo changed. This is not generally expected and config needs to be examined to understand the cause. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PM_ERR Platform Manager returned an error looking up interface [hex]: [chars]

Explanation    A runtime error occured, whereby Platform Manager returned an unexpected error while looking up an interface. If the error is 'Resource temporarily unavailable' then the error is not fatal. Any other error is unexpected, and more serious.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PP_NFN_LIB_GET_INFO Error encountered by HAL ppinfo notification library while receiving ppinfo notification batch. Error: [chars]

Explanation    An error was encountered while processing a notification of a change to the packet path info for one or more adjacencies. Forwarding for the affected adjacencies may now be inconsistent.

Recommended Action    Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PP_NFN_MSG_HDLR Error handling a [chars] message from a HAL ppinfo notification client. Error: [chars] ([chars])

Explanation    An error was encountered while processing a message of the given type from client for HAL notifications of changes to the packet path info for adjacencies for a given interface type. Forwarding for the affected adjacencies may now be inconsistent.

Recommended Action    Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-6-FASTCONVERGENCE_CLI_INFO WARNING: This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Explanation    This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Recommended Action    Please reload the node using the command hw-module reload location r/s/CPU0

FWD_L2HAL Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]

Explanation    A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]

Explanation    A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-HW_OCE_NULL [chars] - GSR L2 HAL internal error: hal object ([chars]) getting a NULL hw_oce

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-INIT [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initalizing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-INVALID_PARENT_OBJ GSR L2 FIB internal error: [chars] failed to get parent [chars] obj - [chars]

Explanation    A runtime error occurred in GSR L2 FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]

Explanation    A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources

Explanation    The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

HAL_PDFIB Messages

Error Message     
 
    
    
   

%FORWARDING-HAL_PDFIB-6-PD_UPDATE [chars] FIB object [chars], action [chars], HAL_OBJ [chars], Ctx 0x[pointer] FIB Ctx [hex], error [chars]

Explanation    This is a supplementary error message generated by c12000 platform FIB mgr to provide additional information with platform specific error codes. We would expect platform independent FIB Mgr generate the main error message FORWARDING FIB PLATF_UPD_FAIL to drive main error message.

Recommended Action    Please collect console logs and identify both PD_UPDATE failure and FIB PLATF_UPD_FAIL messge to correlate the root cause of the failure. Recommende action need to be driven as per the 'FORWARDING FIB PLATF_UPD_FAIL' message

IP_TUNNEL_MA_LTRACE Messages

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL_MA_LTRACE-7-INIT ltrace_init failed for '[chars]': [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the ip_tunnel if this condition happens.

Recommended Action    None

IP_TUNNEL Messages

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-AIB Failed to link AIB: [chars] [[dec]: [chars]]

Explanation    Failed to link AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-AIBSERVER AIB Server error: [chars] [[dec]: [chars]]

Explanation    AIB Server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-ASYNC_MSG Invalid message: [chars] [code=[dec], value=[dec]]

Explanation    Invalid message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-BADCHECKSUM Bad checksum - computed = [hex], received = [hex]

Explanation    Mismatch in received/computed checksum was detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-BADKEY Incorrect key - received: [dec], expected: [dec]

Explanation    A packet was received with a bad key.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EAIDB EA IDB error: [chars]

Explanation    EA IDB related error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EAINIT Error initializing EA of IP Tunnel: [chars]

Explanation    Initialization of IP Tunnel's EA failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EVENTMGR Error of EventMgr: [chars] [[dec]: [chars]]

Explanation    EventMgr failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FEA FEA internal error: [chars]

Explanation    FEA internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_ERROR FIB DLL error: [chars] [[dec]: [chars]]

Explanation    FIB DLL error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_INIT FIB DLL initialization error: [chars] [[dec]: [chars]]

Explanation    Failed to initialize in FIB DLL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_SEND Message send error: [chars] [[dec]: [chars]]

Explanation    Failed to send the message to FIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-IMPSERVER IMP Server error: [chars] [[dec]: [chars]]

Explanation    IMP Server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-IPT_DEBUG IP Tunnel debug: [chars] [[dec]: [chars]]

Explanation    Failed to initialize the debug events for IP tunnel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-LOOPING Encapsulation looping detected: inner: [chars], outer: [chars]

Explanation    An encapsulation loop was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-MAINIT Error initializing MA of IP Tunnel: [chars] [[dec]: [chars]]

Explanation    Initialization of IP Tunnel's MA failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-MEM Memory operation error: [chars]

Explanation    Memory operation error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-NETIOIDB NetIO IDB error: [chars]

Explanation    NetIO IDB related error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-P2MP_TUNNEL Failed to process P2MP tunnel IDB: [chars] [[dec]: [chars]]

Explanation    Failed to process P2MP tunnel IDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-ROUTING GRE tunnel packet received with source routing

Explanation    A GRE tunnel packet with the source routing option was received.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-SEQUENCE GRE tunnel packet received with sequence option

Explanation    A GRE packet was received with the sequence option.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-THREAD Error of pthread: [chars] [[dec]: [chars]]

Explanation    Error of pthread function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_GRE_TUNNEL Packet received for unknown tunnel or bad key. Source: [chars], Destination: [chars], Key: [dec]

Explanation    A GRE tunnel packet was received for a tunnel that is not configured in this router or there was a key mis-match.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_IPIP_TUNNEL Packet received for unknown tunnel. Source: [chars], Destination: [chars]

Explanation    An IPinIP tunnel packet was received for a tunnel that is not configured in this router.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_MSG Invalid message: [chars] [type=[dec]]

Explanation    Invalid message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNSUP_PROTO Unsupported protocol [[dec]]

Explanation    Unsupported protocol.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-VERSION GRE tunnel packet received with bad version number ([dec])

Explanation    A GRE tunnel packet was received with a bad version number.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-DECAP IP Tunnel Decapsulation fail: [chars] [[dec]: [chars]]

Explanation    Failed to decap the packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-ENCAP IP Tunnel Encapsulation fail: [chars]

Explanation    Failed to encaps the packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-FIB_CONNECTION Initialization failed: [chars] [[dec]: [chars]]

Explanation    Initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-MTU Tunnel MTU operation fail: [chars] [[dec]: [chars]]

Explanation    Failed to set/change tunnel mtu.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPT_EA_LTRACE Messages

Error Message     
 
    
    
   

%FORWARDING-IPT_EA_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed.

Recommended Action    None