Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4
Routing Messages
Downloads: This chapterpdf (PDF - 1.8MB) The complete bookPDF (PDF - 10.82MB) | Feedback

Routing Messages

Table Of Contents

Routing Messages

AUTORP_CRP Messages

AUTORP_MAP Messages

BGP Messages

BGP_VRF Messages

CLNS Messages

DAD Messages

EIGRP Messages

EIGRP_POLICY Messages

EVENT Messages

FIB_ForUs Messages

FIB Messages

IGMP_MTRACE Messages

IGPTE_LIB Messages

IP_STATIC Messages

IPMC_GTRIE_DEBUG Messages

IPMC_GTRIE_DEFAULT Messages

IPV4_ADJ Messages

IPV4_IGMP Messages

IPV4_MCAST_CHKPT Messages

IPV4_MCAST_NETIO_DEBUG Messages

IPV4_MFWD Messages

IPV4_MLIB_DEBUG Messages

IPV4_MLIB Messages

IPV4_PIM Messages

IPV6_FIB Messages

ISIS Messages

LDP Messages

LSPV Messages

MFWD_MA Messages

MPLS_ALM Messages

MPLS_IMC_CLIENT Messages

MPLS_IO Messages

MPLS_LCAC Messages

MPLS_LSD Messages

MPLS_NETIO Messages

MPLS_STATIC Messages

MPLS_TE Messages

MRIB_API Messages

MRIB Messages

MSDP Messages

MULTIVER Messages

NTPD Messages

ORA_SHARED Messages

ORA Messages

OSPF_EDM Messages

OSPF_POLICY Messages

OSPF_RIB Messages

OSPF_UV Messages

OSPF Messages

OSPFv3_EDM Messages

OSPFV3_POLICY Messages

OSPFv3_RIB Messages

OSPFv3_UV Messages

OSPFv3 Messages

PIM_NETIO Messages

POLICY_REPOSITORY_DYNREG Messages

POLICY_REPOSITORY_EDM Messages

POLICY_REPOSITORY Messages

RASF Messages

RETRY Messages

RIB_LIB Messages

RIB_QUERY_ORA Messages

RIB Messages

RIP Messages

RIP_POLICY Messages

ROUTE_MAP Messages

RPL_COORD Messages

RRR_PCALC Messages

RSVP Messages

RUMP Messages

SAP_LISTEN Messages

TAGCON Messages

TDP Messages

TIB Messages

UCP_LCTRL_LIB Messages

UCP_LCTRL Messages

UCP_OLM Messages

UCP_OUNI Messages


Routing Messages


This section contains all routing related System Error Messages, such as MPLS, OSPF, BGP, Multicast, MRIB, RIB, and so forth. The following facility codes are represented in this module:

AUTORP_CRP Messages

AUTORP_MAP Messages

BGP Messages

BGP_VRF Messages

CLNS Messages

DAD Messages

EIGRP Messages

EIGRP_POLICY Messages

EVENT Messages

FIB_ForUs Messages

FIB Messages

IGMP_MTRACE Messages

IGPTE_LIB Messages

IP_STATIC Messages

IPMC_GTRIE_DEBUG Messages

IPMC_GTRIE_DEFAULT Messages

IPV4_ADJ Messages

IPV4_IGMP Messages

IPV4_MCAST_CHKPT Messages

IPV4_MCAST_NETIO_DEBUG Messages

IPV4_MFWD Messages

IPV4_MLIB_DEBUG Messages

IPV4_MLIB Messages

IPV4_PIM Messages

IPV6_FIB Messages

ISIS Messages

LDP Messages

LSPV Messages

MFWD_MA Messages

MPLS_ALM Messages

MPLS_IMC_CLIENT Messages

MPLS_IO Messages

MPLS_LCAC Messages

MPLS_LSD Messages

MPLS_NETIO Messages

MPLS_STATIC Messages

MPLS_TE Messages

MRIB_API Messages

MRIB Messages

MSDP Messages

MULTIVER Messages

NTPD Messages

ORA_SHARED Messages

ORA Messages

OSPF_EDM Messages

OSPF_POLICY Messages

OSPF_RIB Messages

OSPF_UV Messages

OSPF Messages

OSPFv3_EDM Messages

OSPFV3_POLICY Messages

OSPFv3_RIB Messages

OSPFv3_UV Messages

OSPFv3 Messages

PIM_NETIO Messages

POLICY_REPOSITORY_DYNREG Messages

POLICY_REPOSITORY_EDM Messages

POLICY_REPOSITORY Messages

RASF Messages

RETRY Messages

RIB_LIB Messages

RIB_QUERY_ORA Messages

RIB Messages

RIP Messages

RIP_POLICY Messages

ROUTE_MAP Messages

RPL_COORD Messages

RRR_PCALC Messages

RSVP Messages

SAP_LISTEN Messages

TAGCON Messages

TDP Messages

TIB Messages

UCP_LCTRL_LIB Messages

UCP_LCTRL Messages

UCP_OLM Messages

UCP_OUNI Messages

AUTORP_CRP Messages

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-BAG_RELATED_ERROR Bag related error: [chars]

Explanation    The Candidate RP had trouble wth Bags.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EDM_ACCESS_ERROR Sysdb EDM related error: [chars], [chars]

Explanation    The Candidate RP had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EVENT_CONN_MGR_ERROR Event connection manager error : [chars], [chars]

Explanation    Failed to open connection to Connection Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-EVENT_MGR_CREATE_FAILED Failed to create an event manager

Explanation    A problem occurred when a call to event_manager_create() was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-GEN_ERROR Error : [chars] failed - [chars]

Explanation    General Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-IM_RELATED_ERROR A call to [chars] returned [chars]

Explanation    A problem occurred when a call to IM was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-INIT_FAILED Initialization failed : [chars]

Explanation    autorp_candidate_rp failed to initialize successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-IPARM_RELATED_FAILURE A call to [chars] returned [chars]

Explanation    A problem occurred when a call to one of the IPARM APIs was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-MALLOC_FAILED malloc() failed : failed to allocate memory to receive messages

Explanation    A call to malloc() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SOCKET_ERROR Socket Error : [chars] : [chars]

Explanation    Socket Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SYSDB_ACCESS_ERROR Sysdb related error: [chars], [chars]

Explanation    The Candidate RP had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-SYSDB_REGISTRATION_FAILED Sysdb registration error: [chars]

Explanation    The Candidate RP had trouble registering as a notifier with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-TIMER_ERROR Timer Error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_CRP-3-TUPLE_ERROR Tuple operation error : [chars]

Explanation    Tuple operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AUTORP_MAP Messages

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-BAG_RELATED_ERROR Bag related error: [chars]

Explanation    The Mapping Agent had trouble wth Bags.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-DEBUG_ERROR Debug error : [chars]

Explanation    Debug Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EDM_ACCESS_ERROR Sysdb EDM related error: [chars], [chars]

Explanation    The Mapping Agent had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EVENT_CONN_MGR_ERROR Event connection manager error: [chars], [chars]

Explanation    Failed to open connection to Connection Manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-EVENT_MGR_CREATE_FAILED A call to event_manager_create() failed

Explanation    A problem occurred while calling the event_manager_create() API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-IM_RELATED_ERROR The function [chars] returned error : [chars]

Explanation    Failed some IM related operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-INIT_FAILED Initialization failed : [chars]

Explanation    autorp_mapping_agent failed to initialize successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-IPARM_RELATED_FAILURE A call to [chars] returned [chars]

Explanation    A problem occurred when a call to one of the IPARM APIs was made.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-MALLOC_FAILED malloc() failed : failed to allocate memory to receive messages

Explanation    A call to malloc() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-OOR_LIMIT Cache maximum reached: [dec], new group range not added

Explanation    OOR Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-RTREE_ERROR RTree error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SOCKET_ERROR Socket Error : [chars] : [chars]

Explanation    Socket Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SYSDB_ACCESS_ERROR Sysdb related error: [chars], [chars]

Explanation    The Mapping Agent had trouble accessing SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-SYSDB_REGISTRATION_FAILED Sysdb registration error: [chars]

Explanation    The Mapping Agent had trouble registering as a notifier/edm with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-TIMER_ERROR Timer Error : [chars]

Explanation    Timer Error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-AUTORP_MAP-3-TUPLE_ERROR Tuple operation error : [chars]

Explanation    Tuple operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BGP Messages

Error Message     
 
    
    
   

%ROUTING-BGP-2-ADDROUTE Failed to add net [chars] to the BGP table

Explanation    An error occurred whilst trying to insert a net to the BGP table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-BRIB_API_SYNC bRIB API detected loss of sync: invalid [chars] [hex] at [hex]

Explanation    The data stream between the bRIB and a speaker was corrupted and the receiving process could not interpret the received message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_EVM_EVENT_BLOCK Error in event loop for [chars] thread: [chars]

Explanation    An error occurred in the event loop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_MEM_ALLOC Failed to allocate memory for [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition. BGP may not operate correctly until the process is restarted.

Recommended Action    Reduce other system activity to ease memory demands, then restart the process. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-2-ERR_THREAD_DEADLOCK Deadlock detected (thread [unsigned int]): holding: [chars]

Explanation    BGP detected a lock being held when all locks should have been released.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-2-FATAL_WRAPPER Fatal error: A call to [chars] failed unexpectedly: [chars]

Explanation    A function call failed unexpectedly - this is probably a system problem

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-AF_LIB_FILE_ERROR Failed to read Address Family data file: [chars] [chars]

Explanation    'File/Directory open operation failed, or the data in the file was corrupt'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-AF_LIB_FILE_WRONG_INFO Failed to read Address Family data file [chars]: [chars] on line [unsigned int]

Explanation    'The data in the Address Family data file was corrupt'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ALREADY_DONE Cannot [chars]%s: already done

Explanation    An operation could not be performed because it had already been completed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_BAD Failed to [chars] RIB due to an invalid attribute key number ([hex])

Explanation    There is a problem with the attribute key generation routine.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_CHKPT Failed to checkpoint attribute key

Explanation    The chkpt library failed to checkpoint the attribute key number. Normal operation of BGP (standalone) or bRIB (distributed) is not impacted unless the process is restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ATTRKEY_OVERFLOW Failed to generate a new attribute key for the incoming UPDATE

Explanation    This is an extremely rare case where the attribute key overflow protection mechanism fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BAD_REFCNT Bad reference count value ([unsigned int]) for [chars] ([pointer])

Explanation    'This indicates a internal data structure inconsistency'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP process manager. If this occurred during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_PROCESS_START Failed to start [chars] process (ID: [unsigned int]): [chars]

Explanation    The BPM failed to start the process in the error message. As a result, the process will not be running.

Recommended Action    Check that the process is not already running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is not running, attempt to start it using the 'process restart' command. If other error messages are seen along with this one, or when attempting to manually start the process, please consult the documentation for those errors and attempt to rectify them. If problems persist, copy this error message and any others exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_PROCESS_STOP Failed to stop [chars] process (ID: [unsigned int]): [chars]

Explanation    An error occurred when trying to stop the process specified in the error message. As a result, the process may still be running, which could adversely affect the operation of other processes.

Recommended Action    Check whether the process is still running using the 'show process bgp location all' or 'show process brib location all' command as appropriate. If the process is running, kill it using the 'process kill' command. If problems persist, copy this error message and any subsequent ones exactly as they appear on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BPM_SWITCH_MODE Failed to switch to [chars] mode: [chars] ([chars])

Explanation    An error occurred when switching between standalone and distributed mode.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BRIB_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP RIB. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-BUF_TOO_SHORT A string buffer was too short during a string print operation (string [chars] truncated)

Explanation    Whilst trying to format a string, the buffer passed in was too short and the string was truncated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_DEL Notify delete of [chars] failed with warning: [chars], no further action necessary.

Explanation    A speaker or the bRIB failed to process the removal of some configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_FALLOVER Apply for fast-external-fallover failed: [chars]

Explanation    A speaker failed to process a configuration change for 'fast-external-fallover'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-CONFIG_SET Notify for [chars] failed with error: [chars], system may now be in an inconsistent state.

Explanation    A speaker or the bRIB failed to process a configuration change.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DEBUG_CONFIG Failed to apply debug configuration: [chars]

Explanation    An error occurred whilst applying the debug configuration

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DELPATH Attempted to delete path from empty net [chars]

Explanation    An attempt was made to delete a path from a net with a path count of 0

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-DLL_ERROR Failed to [chars] [chars] DLL: [chars]

Explanation    An error occurred whilst trying to open or initialize a DLL. The process will be restarted if this error occurs during process startup.

Recommended Action    If the process has been restarted and the problem recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EDM_INIT_FAILED EDM server initialization failed: [chars]: [chars]

Explanation    Initialization of the EDM server failed. The process will be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ERR_ALM_API ALM/LSD API: [chars] - [chars] failed

Explanation    An ALM/LSD API returned an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EXTCOMM Failed to create extended community: [chars]

Explanation    The import table list associated with an extended community set could not be created. This can occur if there is insufficient memory to allocate the import table list, or the number of importing tables exceeds the hard coded limit on the number of tables that a route may be imported into.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-EXTCOMM_ADD Failed to add one or more [chars] extended community for table [chars] prefix [chars]

Explanation    While attaching extended communities to the path attribute we reached the maximum extended community limit and as a result we failed to add one or more extended community to the path attribute.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-HA_INIT Initialization failed ([chars]%s)

Explanation    High Availabality initialization failed. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IFACE_LOOKUP Interface lookup for [chars] Failed: [chars]

Explanation    Interface manager failed to lookup nexthop interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IM_DMZLINK_BW Failed to register for DMZ link bandwidth change for neighbor [chars]: [chars]

Explanation    BGP failed to register with interface manager for DMZ link bandwidth change notifiction for a given neighbor

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IMPORT_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the import thread. If this occurred during process startup, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INIT_GET_VALUE Failed to obtain [chars] during initialization: [chars]

Explanation    An error occurred when retrieving a required value during initialization. As a result the BGP process can not initialize.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INSUFMEM Failed to allocate memory for [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-3-INVAL_REDUNDANCY_ROLE Initialization failed ([chars]%s)

Explanation    An invalid Redundancy Role was delivered to BGP. If this occured during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-IO_INIT Initialization failed: [chars] [chars] ([chars])

Explanation    An error occurred while initializing the IO thread in speaker process. The process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-LABEL_INIT Initialization to BGP/LABEL failed ([chars]:[chars])

Explanation    An error occurred whilst initialising the LABEL thread. This could be caused by failure to allocate resources or by errors when calling the MPLS label manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-LOCK_RECURSIVE Attempt to recursively lock net [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to lock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MAX_IMPORT No. of importing VRFs exceeds max ([unsigned int]), limited to [unsigned int] tables: (Err: [chars])

Explanation    There is a hard coded limit on the number of tables that a route may be imported into. This limit has been exceeded, so the route may not be present in some of the importing tables. The limit is such that this message should not be seen under normal operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MAX_VALUE_EXCEEDED The value of [chars] ([unsigned int]) exceeds the maximum value: [unsigned int]

Explanation    The value of an internally computed variable has exceeded the maximum value

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-MIB_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP MIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NEGCOUNTER Negative path or bestpath counter for peer [chars]

Explanation    The counter value for accepted prefixes is wrong and less than zero

Recommended Action    The counter can be corrected by resetting the session. However, the only behavior affected by an incorrect counter is enforcement of the 'max-prefix' command.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NOMEM_RESET Failed to allocate memory for [chars], resetting neighbor

Explanation    The requested operation could not be accomplished because of a low memory condition. One or more neighbor sessions have been reset to free some memory.

Recommended Action    In the problem recurs, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-BGP-3-NOMSGCHUNK Failed to allocate [unsigned int] bytes from the memory pool for message of type [unsigned int]

Explanation    A request was made to allocate a message size for which there was no memory pool large enough. This may indicate a software error in the calculation of the requested size.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_INSTBUILD Failed to build [chars]: [chars] ([chars])

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_ORABUILD Failed to build ORA[chars]: [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_CREATE Failed to [chars] for RD [chars], address-family [chars]

Explanation    A software error has occurred whilst trying to initialize RD node inside BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_LOCK_RECURSIVE Attempt to recursively lock rdinfo [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to lock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RD_UNLOCK_ERR Failed to unlock RD node [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to unlock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-REDIST_FAIL Failed to register with the RIB for redistribution of [chars] [chars] [chars] routes: [chars]

Explanation    A RIB client library call for redistribution of routes failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_CONN_FAIL Failed to open connection to the RIB for address family [unsigned int]: [chars]

Explanation    The connection to the RIB could not be established and a retry timer could not be started

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_FAIL Failed to [chars] for [chars] while calling the RIB instance [unsigned int]: [chars]

Explanation    A RIB library call failed unexpectedly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP RIB thread. The process will be restarted if this error occurs during process startup.

Recommended Action    If the process has been restarted and the problem recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_INIT_FAIL Initialization to RIB failed for [chars]: [chars]

Explanation    An error occurred whilst initialising the RIB for a new address family. This could be caused by failure to allocate resources or by errors when calling the Table Resource Manager or the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_RETRY_FAIL RIB route retry failure: [chars] for [chars]

Explanation    Some routes were not successfully installed in the RIB. Consequently, an attempt was made to save these routes to retry later. However, an error was encountered during the save attempt.

Recommended Action    Issue a 'clear route ' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.

Error Message     
 
    
    
   

%ROUTING-BGP-3-RIB_TABLE_FAIL Failed to [chars] for [chars], RIB table [hex]

Explanation    An error was encountered during some operation for the specified address family and RIB table. This could be due either to a lack of resources or a software problem.

Recommended Action    Issue a 'clear route ' to cause BGP routes to be reinstalled in the RIB. If this does not work, issue a soft or hard reset to all peers.

Error Message     
 
    
    
   

%ROUTING-BGP-3-SCAN_INIT Scanner library initialization failed ([chars]%s)

Explanation    An error occurred while initializing the scanner library. The process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-SPKR_INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP speaker process. If this occurred during process startup or RP Switchover, then the process may be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-TABLE_CREATE Failed to create table context for the vrf [chars] afi/safi [dec]/[dec]: [chars]

Explanation    An error occurred when creating the table context for the shown vrf name, afi, safi. As a result table can't be activated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-TBLATTR_VERSION Unable to propagate table attribute versions for [chars] : [chars]

Explanation    An internal error was encountered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-UNKNOWN_MEMSTATE BGP received a notification about an unknown memory state ([unsigned int])

Explanation    BGP received a low memory notification from wdsysmon for an unknown memory state, ie not NORMAL, MINOR, SEVERE or CRITICAL. As a result, no action was taken.

Recommended Action    Check the memory on the node, and if it is low, take manual action to release memory, eg by resetting some BGP neighbors (using the 'clear bgp' command).

Error Message     
 
    
    
   

%ROUTING-BGP-3-UNLOCK_ERR Failed to unlock net [pointer] (lock: [hex])

Explanation    A software error has occurred whilst trying to unlock a network entry in the BGP Table database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-VRF_CREATE Failed to create VRF context for the vrf [chars] : [chars]

Explanation    An error occurred when creating the vrf context for the shown vrf name. As a result VRF can't be enabled.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-3-VRF_DELETE VRF [chars] still has undeleted table afi/safi [dec]/[dec]. Table will be deleted.

Explanation    An error occurred while deleting the VRF. An address-family table under the VRF is still not deleted. Ideally all the tables under the VRF should be deleted first before VRF is deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-ATTRKEY_INCONSISTENT BGP detected an inconsistency in attribute key generation. Will correct the problem by renumbering all attributes

Explanation    The attribute key generation routine has gone beyond the checkpointed value. This is a rare condition to occur as the key generation algorithm is very simple.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-BFD_INVALID_NBR Attempt to register BFD session on invalid neighbor: [chars]

Explanation    Internal error indicating that an attempt has been made to create a BFD session for a neighbor type that is not supported by BFD.

Recommended Action    The BFD session for the neighbor in the log will not be created. If a BFD session for this neighbor is not required, no further action is needed. To re-attempt creation of a BFD session for this neighbor, remove and re-add the bfd fast-detect configuration for the neighbor.

Error Message     
 
    
    
   

%ROUTING-BGP-4-DESTROY_CHUNK Chunk pool [chars] is no longer in use but cannot be destroyed

Explanation    'BGP has resized its bit fields, so the old bit field chunks should be ' 'destroyable. Nonetheless, BGP is unable to destroy the old chunk and, ' 'hence, cannot release unwanted memory.'

Recommended Action    This error will not cause any erroneous behavior, hence no further action is needed to rectify the situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-INCONSISTENT Detected inconsistent config state: [chars]

Explanation    The internal state representing the configuration was invalid, but has now been fixed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-LOCK_ORDER Locking order violation (thread [unsigned int]): [chars] gained while holding: [chars]

Explanation    BGP detected a violation of lock ordering requirements

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-LOCK_RELEASE Lock released without being held (thread [unsigned int]): [chars] gained [unsigned int], released [unsigned int]

Explanation    BGP detected a lock being released when it was not held.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-MAXPFXEXCEED No. of [chars] prefixes received from [chars]: [unsigned int] exceed limit [unsigned int]

Explanation    Number of prefixes received from a neighbor for a given address family has exceeded the limit configured with the 'max-prefix' command.

Recommended Action    Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.

Error Message     
 
    
    
   

%ROUTING-BGP-4-NBR_NOPOLICY No [chars] [chars] policy is configured for eBGP neighbor [chars]. No [chars] prefixes will be [chars] the neighbor until [chars] policy is configured.

Explanation    No routing policy has been configured for the specified eBGP neighbor in the given direction (inbound or outbound) for the address family named. To avoid unintended routing effects, no prefixes will be accepted in that direction until some policy is configured. 'Policy' can be a route-policy, or (for inbound policy) it can be a prefix list.

Recommended Action    Configure a route-policy for the neighbor in the given direction. If the desired behavior is to accept/send all routes, the route-policy should contain the single statement 'pass'. If the desired behavior is not to accept/send any routes, the route-policy should contain the single statement 'drop'.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_COMMUNITY_OVERFLOW Community overflow from policy application

Explanation    Policy tried to add more communities than a BGP route can hold.

Recommended Action    Find the affected neighbor with 'show bgp community truncated'. Modify policy on the affected neighbor to delete unnecessary communities.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_EBGP [chars] operations in [chars] [chars] policy [chars] will be ignored for external neighbor/update-group [chars]

Explanation    A policy attached to an eBGP neighbor performs operations that are illegal for eBGP routes, such as modifying the local-preference.

Recommended Action    Modify the policy to avoid the prohibited operations.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_IBGP [chars] operations in [chars] [chars] policy [chars] will be ignored for internal neighbor/update-group [chars]

Explanation    A policy attached to an iBGP neighbor performs operations that are illegal for iBGP routes, such as modifying the AS-path or MED.

Recommended Action    Modify the policy to avoid the prohibited operations.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POLICY_NHOP_WRONGAFI The policy '[chars]' attempted to set a next-hop on [chars] with an unsuitable address type. The next-hop will not be modified.

Explanation    The specified route-policy (or a policy applied by that policy) is configured - perhaps on a neighbor or for redistribution - and it is attempting to set the next-hop of the specified route to an address that doesn't match the address-family of the route. For example, it might be setting an IPv6 next-hop on an IPv4 route. Since this does not make any sense, the attempt will be ignored, and the next-hop will not be changed. (Note that this message is rate-limited, so it will not appear for every single route that is affected). Use the command 'show rpl policy attachpoints' to determine where this policy is in use. Use the command 'show rpl policy uses policies' to determine which other policies this policy applies (since the relevant 'set next-hop' may be in one of these policies).

Recommended Action    Modify the policy so that it sets a next-hop that matches the type of route it is modifying.

Error Message     
 
    
    
   

%ROUTING-BGP-4-POTENTIAL_DEADLOCK Potential for deadlock detected: Locks: [chars]

Explanation    BGP detected the potential for a deadlock to occur. The process will be restarted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-4-SAME_RD_SET Ignored import policy set operation for same RD import on [chars] path received from [chars]

Explanation    The import policy must not perform set operations on paths, received from a PE neighbor, whose RD is the same as the RD for the importing VRF. The set operation has been ignored.

Recommended Action    Modify the import policy so that it does not perform the set operation, or use globally unique RDs for VRFs.

Error Message     
 
    
    
   

%ROUTING-BGP-4-SPKR_RUNNING BGP AS number has changed from [chars] to [chars] - bgp (speaker) process will be restarted.

Explanation    The bpm process was terminated improperly and the speaker process did not receive the notification to terminate. A new bpm process has started with a different AS number due to a new bgp configuration while the speaker process is still running with the previous AS number.

Recommended Action    The speaker will be restarted to handle this error. No further corrective action is necessary. However, please contact your Cisco technical support representative to report this error.

Error Message     
 
    
    
   

%ROUTING-BGP-4-UNKNOWN_ACL Unknown ACL action: [unsigned int]

Explanation    BGP received an unknown action (permit/deny/etc) from the ACL library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-5-ADJCHANGE neighbor [chars] [chars] [chars]%s

Explanation    A BGP neighbor has either come up or gone down. This message appears only if the bgp log neighbor changes command is configured for the BGP process.

Recommended Action    This informational message normally appears as routers and BGP neighbors go up or down. However, unexpected neighbor loss might indicate high error rates or high packet loss in the network and should be investigated.

Error Message     
 
    
    
   

%ROUTING-BGP-5-BPM_ROUTER_ID No router ID available. Cannot connect to neighbors (retry in [unsigned int] seconds)

Explanation    IPARM returned no valid router ID. This is due to lack of a global router ID or a loopback interface.

Recommended Action    Try one of the following: 1) Set up a BGP router ID via the `bgp router-id' command in the `router bgp' configuration mode, or 2) Set up a global router ID via the `router-id' command in the global configuration mode, or 3) Set up a loopback interface with an IPv4 address.

Error Message     
 
    
    
   

%ROUTING-BGP-5-LOWMEM_RESET neighbor [chars] reset due to SEVERE low memory condition - use 'clear bgp [chars]' to re-enable

Explanation    A SEVERE low memory condition has been encountered on the node where the BGP process is running, and so to free some memory, BGP has reset a neighbor. BGP will continue to reset neighbors periodically until the low memory condition abates. The neighbors which are reset will be shut down until a 'clear bgp' command is used to bring them back up. They will not come up automatically when the low memory condition abates - this is to prevent the node oscillating between memory states.

Recommended Action    Free some memory on the system or correct the condition causing the low memory problem, and then use the 'clear bgp ' command to re-enable the neighbors that have been shut down. The 'show bgp all all summary' command can be used to easily see which neighbors are affected.

Error Message     
 
    
    
   

%ROUTING-BGP-5-LOWMEM_SHUTDOWN BGP is shutting down due to [chars] low memory condition - use 'process restart bgp location ' to restart

Explanation    BGP received a notification that CRITICAL low memory state has been entered, or that SEVERE low memory state has been entered while BGP is in READ-ONLY mode, and consequently it has shut itself down in order to free memory.

Recommended Action    Check the memory on the node, and take steps to free memory or to correct the condition which caused the low memory state. Then restart the process using the 'process restart bgp location ' command.

Error Message     
 
    
    
   

%ROUTING-BGP-5-MAXPFX No. of [chars] prefixes received from [chars] has reached [unsigned int], max [unsigned int]

Explanation    Number of prefixes received from a neighbor for a given address family has reached the warning level configured with the 'max-prefix' command.

Recommended Action    Check the prefixes received from the neighbor and verify whether the limit should be increased, or the neighbor is sending more prefixes than expected.

Error Message     
 
    
    
   

%ROUTING-BGP-5-POLICY_RESET Policy configuration change on neighbor [chars] requires HARD reset (clear bgp [chars]) to take effect.

Explanation    Automatic soft reset on policy change is not possible as the neighbor does not support ROUTE_REFRESH and 'soft-reconfiguration inbound' is not configured.

Recommended Action    Manually clear affected peer at earliest convenience, in order for policy change to take effect.

Error Message     
 
    
    
   

%ROUTING-BGP-6-WARNING_WRAPPER Warning: A call to [chars] failed unexpectedly: [chars]

Explanation    A function call failed unexpectedly - this is probably a system problem

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP-7-BPM_CHKPT Failed to checkpoint allocation of [chars]([chars]) to speaker [unsigned int]

Explanation    The BPM failed to record the allocation in the checkpoint table. This could cause operational problems if the BPM is later restarted.

Recommended Action    No further action is necessary unless the BPM restarts. In that case, if problems are seen it may be necessary to deconfigure BGP completely and then reconfigure it.

BGP_VRF Messages

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-DUPLICATE_ID Failed to store [chars] ID [hex] for VRF [chars].

Explanation    A ID has been received from RSI that duplicates an existing VRF or table ID. As a result, the new ID has been ignored, and subsequent operation for that VRF will be incorrect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-INIT Initialization failed ([chars]%s)

Explanation    An error occurred while initializing the BGP VRF module. The BPM process will be restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-NOTIFY Failed to apply configuration change for: [chars] ([chars]).

Explanation    A notification of a configuration change could not be applied, leaving the internal data structures inconsistent with the configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-RD_APPLY Failed to apply RD configuration change for [chars]. System may now be in an inconsistent state.

Explanation    The RD value for the VRF failed to be set, leaving the internal data structures inconsistent with the configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-BGP_VRF-3-RD_PUBLISH Failed to publish RD configuration: [chars]. System may now be in an inconsistent state.

Explanation    The RD value for a VRF or set of VRFs failed to be published.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CLNS Messages

Error Message     
 
    
    
   

%ROUTING-CLNS-2-LC_INPUT Unexpected packet num [unsigned int] received on the LC

Explanation    CLNS on the LC doesnot process any packet. It will ignore any packets it receives on the LC.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ASYNC_ATTACH Failed to setup ingress packet handler for NetIO: [chars]

Explanation    CLNS encounted errors when initializing its connection with NetIO.

Recommended Action    CLNS will restart and try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-CONFIG_INIT Cannot initialize CLNS configuration: [chars]

Explanation    CLNS could not initialize its configuration mechanism, and all future CLNS configuration will fail.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-DETACH Socket closing on interface [chars] failed: [chars]

Explanation    The socket cannot remove an interface when closing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-DLL_REGISTER Registration for '[chars]' failed: [chars]

Explanation    Some internal initializations fail miserably!

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_CLIENT Error during operation '[chars]': [chars]

Explanation    CLNS EDN client (usually a show command) failled to perform certain operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_ENCODE_FAILED Bad encoding failed for [chars]: [chars]

Explanation    CLNS failed encode a bag for EDM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EDM_INIT Operation '[chars]' during EDM initialization failed: [chars]

Explanation    CLNS show command failed to initialyze the EDM server. 'show' command will likely fail, although CLNS should be able to operate.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DEBUG_PACKET_INIT CLNS NetIO packet debugging failed to initialize.

Explanation    CLNS failed to initialize packet debugging functions.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DEBUG_RETRIES_EXCEEDED Stopping CLNS debug initialization attempts after [unsigned int] tries

Explanation    CLNS tried to initialize packet debugging functions but was unable to succeed even after a number of attempts. No more attempts will be made.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_DROP_PKT [chars]. Dropping packet

Explanation    CLNS encountered an internal error while trying to process a packet (usually for output). As a result CLNS dropped the packet.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_INTERFACE_DATA CLNS was unable to resolve an interface while installing cap/decap chain.

Explanation    CLNS was unable to look up local interface information. As a result the system may not be able to send/receive ISIS packets over this interface. This may be due to problems with either CLNS or the forwarding infrastructure.

Recommended Action    Restarting the CLNS process may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_MEDIA_REGISTER CLNS failed to register media callback with netio: [chars]([dec])

Explanation    CLNS failed to register for media callback with netio during initialization. As a result, CLNS will not be able to add its caps and wont receive or send packets. It's an internal error.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_NETIO_ENCAP_CALLBACK CLNS netio encap callback for media caps: [chars]([dec]) failed [chars]([dec])

Explanation    CLNS failed to setup encap callback with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_NETIO_SET_MAPPING CLNS netio set mapping for media caps: [chars]([dec]) failed [chars]([dec])

Explanation    CLNS failed to setup mapping with this particular media or base capsulation. As a result CLNS will not be able to receive CLNS packets on this caps on any interface on this node.

Recommended Action    Restarting CLNS and/or Netio may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERR_PARTNER_LOOKUP CLNS-NetIO partner lookup failed

Explanation    NetIO was unable to initialize the CLNS partner process. As a result the system will not be able to send/receive ISIS packets over interfaces on this line card.

Recommended Action    Restarting CLNS and/or NetIO may clear the error condition. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ERROR_INIT Cannot register CLNS error codes: [chars]

Explanation    CLNS could not initialize its error code. CLNS will work, but error messages won't be user friendly!

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-ETHERENCAP Incorrect MAC address length [dec]

Explanation    The MAC address length provided for the ethernet encapsulation is wrong.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVENT_CONN_CREATE_FAIL Error creating '[chars]' connection: [chars]

Explanation    CLNS failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVENT_CONN_NOTIFY_FAIL Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, CLNS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-EVM_INIT Error while initializing the [chars]: [chars]

Explanation    An operation failed during the initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-GET_TRAFFIC Cannot get traffic information: [chars]

Explanation    CLNS show command failed to get the required information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-HSSD_REGISTER_FAIL CLNS failed to register for an HSSD area: [chars]

Explanation    CLNS failed to register for an HSSD area. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-IDB_SOCK Error removing interface ([hex]) from the clns socket: [chars]

Explanation    An operation failed during the interface deletion.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-INTERFACE Operation '[chars]' on CLNS interface [chars] failed: [chars]

Explanation    CLNS could not initialize its interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-L2INFO_LEN [chars] length is [dec], should be [dec]

Explanation    The length of the L2 data received is not what it should be.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_ADD_BINDING Couldn't add clns binding to lpts port arbitrator, error = [chars]

Explanation    The clns process was unable to add a binding to LPTS. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_DELETE_BINDING Couldn't delete CLNS binding from Port Arbitrator, result = [chars]

Explanation    The clns process was unable to delete a binding from LPTS. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-LPTS_SETOPT Cannot set the LPTS option '[chars]': [chars]

Explanation    An operation failed during LPTS option setting.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-PAK Packet operation '[chars]' failed: [chars]

Explanation    An operation failed during packet handling.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-PAK_READ Failed to read data from packet area: [chars]

Explanation    The clns process was unable to read the input packet. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-PFI_INIT_FAILED PFI Initialization failed: [chars]

Explanation    An operation failed during the Packet Forwarder Interface initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SEND_ASYNC CLNS was unable to wake itself up([dec]) for reading pending packets: [chars]

Explanation    CLNS is unable to wake up itself to read the pending ingress packets from NetIO. ISIS will not be able to receive these pending packets from CLNS.

Recommended Action    Restarting CLNS might help. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCK_INIT Socket initialisation task '[chars]' failed: [chars]

Explanation    An operation failed during socket initialisation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCK_SET_NAME Internal socket error on packet reception: [chars]

Explanation    An operation failed during packet reception.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCKET_PARSE_PATH error encountered when parsing path: [chars]

Explanation    CLNS was unable to extract the xipc & job id from the socket path. This might cause communication problems between ISIS and CLNS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-SOCKET_RESMGR_ATTACH Failed to setup the clns socket as a resource manager: [chars]

Explanation    The clns process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-STATSD_INIT Cannot connect to the stats server: [chars]

Explanation    An operation failed during the Stats Server Connection opening.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-STATSD_REGISTER Cannot [chars] with the stats server for interface ([hex])

Explanation    An operation failed during the Stats Server Interface registration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-3-TIMESTAMP Operation '[chars]' failed during packet timestamping: [hex] ([chars])

Explanation    An operation failed during timestamp processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-BASE_CAPS_LU_FAIL IM base capsulation lookup for interface ([hex]) failed: [hex], '[chars]'

Explanation    The Interface Manager returned an unexpected error when CLNS attempted to lookup an interface's base capsulation type. This may be a resource problem but is probably an internal error.

Recommended Action    Consider restarting the CLNS and/or Interface Manager processes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-DEBUG_REGISTER_FAIL Failed to register with the debugging subsystem: [hex], '[chars]'

Explanation    CLNS failed to register with the debugging subsystem. If this message has been generated then CLNS debugging may not be available. This may be a system resource problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-ERR_CONN_SETRETRY Error setting the linear retry period for '[chars]': '[chars]'

Explanation    CLNS failed to set the linear retry period for connecting to sysdb. We set the retry period in order to avoid immediate reconnection attempt from clns to sysdb server when the latter restarts. This prevents clns from blocking on sysdb and cause any traffic drop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-ERR_IDB_LOOKUP_DROP_PKT [chars]: Netio IDB not found for interface ([hex]), packet 0x[pointer] dropped

Explanation    CLNS was unable to find the NetIO IDB for the interface handle in the message. If this is seen during NetIO restart, it could be transient condition that should recover once NetIO is back up with all the IDBs in steady state. If this is seen in steady state, the ISIS adjacency on this interface could be affected. *RECUR*

Recommended Action    If this message is seen during NetIO restarts and the message is seen only at that time, no further action is needed. If this message is seen during steady state more than once with the ISIS adjancency on this interface being affected, restarting netio process or improxy process might help in redownloading the IDBs to netio.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-GET_MCASTADDR_ERR Failed to get MAC address(im_attr_macaddr_get) for [chars]: [chars]

Explanation    The process failed to get MAC address from the interface. This can be caused by a faulty hardware.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_CRE_REG_FAIL CLNS interface registration failed for base cap type [chars]: [chars]

Explanation    CLNS process failed to register an interface with the Interface Manager. This is an internal error. It requires a restart of process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_SERV_BIND_FAIL Failed to bind to the Interface Manager: [dec]

Explanation    CLNS failed to bind to the Interface Manager control plane. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-IM_SIGEVENT_FAIL IM control handler setup failed: [chars]

Explanation    CLNS failed to establish signal event in the Interface Manager control plane. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-MAC_SIZE_ERR Incorrect MAC address size for [chars] (returned: [dec], expected: [dec])

Explanation    MAC address size does not match IEEEBYTES (6 bytes). This can be caused by a faulty hardware.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-NETIO_OUTPUT_FAIL Failed to send packet 0x[pointer] to NetIO: [chars]

Explanation    CLNS was not able to send a packet to NetIO. This could be because of communication problems between CLNS and NetIO.

Recommended Action    If this message is seen during transient conditions, for example when NetIO is restarting either because of install operation OR because NetIO crashed then it is not harmful unless you see ISIS adjacencies dropping. If it is seen under steady state conditions OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-PAK_FROM_ISIS_FAIL Failed to process packet 0x[pointer] from ISIS: [chars] [chars]

Explanation    CLNS was not able to process a packet from ISIS successfully and hence dropped the packet.

Recommended Action    This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-PAK_FROM_NETIO_FAIL Failed to process packet 0x[pointer] from NetIO: [chars]:[chars]

Explanation    CLNS was not able to process a packet from NetIO successfully and hence dropped the packet.

Recommended Action    This message could be seen under low packet memory conditions and should recover once packet memory becomes available to CLNS. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-SEND_HELLO_PDU_TO_ISIS_FAIL Failed to send Hello PDU(0x[pointer]) type [chars] ([hex]) from interface ([hex]) to ISIS instance [chars]: [chars]

Explanation    CLNS was not able to send a hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.

Recommended Action    If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions OR adjacency flaps are seen on this interface OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-SEND_PDU_TO_ISIS_FAIL Failed to send PDU(0x[pointer]) type [chars] ([hex]) from interface ([hex]) to ISIS instance [chars]: [chars]

Explanation    CLNS was not able to send non-Hello class PDU to ISIS. This could be because of communication problems between CLNS and ISIS.

Recommended Action    If this message is seen during transient conditions, for example when ISIS is restarting either because of install operation OR because ISIS crashed then it is not harmful. If the error message says out of memory, it is because of the queue between CLNS and ISIS being FULL which could either be because traffic rate is very high or ISIS might not be reading the packets. If it is seen under steady state conditions OR If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-4-UNKNOWN_MEDIA Unknown media ([dec]) on interface ([hex])

Explanation    The specified interface media is not supported by CLNS. This means that IS-IS and other CLNS protocols cannot run over the specified interface. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. As a workaround consider using a different encapsulation for the interface.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-CAPS_ADD_FAIL Failed to add CLNS encapsulation to interface ([hex]): [chars]

Explanation    CLNS failed to add caps to its encapsulation chain. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-CONN_PAK_AREA_FAIL CLNS failed to connect to packet area

Explanation    CLNS failed to connect to packet subsystem during initialization. As a result, CLNS will not be able to receive or send packets. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-DEBUG_THREAD_CREATE Error starting thread for debug registration: [dec]

Explanation    CLNS failed to create the thread for debug registration and to handle debug events. Thus, causing unavailability of debugs. But CLNS should continue with the normal functionality, so the process should not exit even if this thread is not created.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-ERR_L2_HASH CLNS failed to initialize the L2 hash function: [chars]

Explanation    CLNS failed to initialize the L2 hash function. It's an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-ERR_STACKMEM Could not alloca [dec] bytes

Explanation    CLNS failed to allocate stack memory space.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-CLNS-7-IM_ATTR_REG_FAIL Failed to register for notification of MAC address: [chars]

Explanation    An error was discovered during the Interface Manager MAC address registration. It requires a restart of process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DAD Messages

Error Message    
 
    
    
   

%ROUTING-DAD-3-ERR_EVM_ASYNC_ATTACH Unable to listen for events because: [chars]

Explanation    A failure occured while trying to setup the event listen structure for package un-installs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_BIND Sysdb bind operation failed because: [chars]

Explanation    The bind operation has failed for the above reason. This is something that should not occur under normal operations.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_DELETE Sysdb delete operation failed because: [chars]

Explanation    The DAD library attempts to delete the old protocol information before writing out the new information. This delete operation failed for the above reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSDB_SET The writing of sysdb information failed because: [chars]

Explanation    The DAD library encountered an error while writing out the policy information for the above reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_AVAILABLE Unable to declare proc available because: [chars]

Explanation    A failure occured while trying to tell sysmgr that we are available for availability.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_CLEANUP Unable to listen for cleanup notices because: [chars]

Explanation    A failure occured while trying to ask sysmgr for cleanup events for package un-installs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-3-ERR_SYSMGR_PROC_READY Unable to declare proc ready because: [chars]

Explanation    A failure occured while trying to tell sysmgr that we are ready for processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-DAD-7-SETUP Invalid setup at [chars]@[dec]: [chars]

Explanation    There was something illegal about the setup operations that where performed. This should be a straight coding error that will fail everytime and should be cleaned up before releasing the code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EIGRP Messages

Error Message     
 
    
    
   

%ROUTING-EIGRP-2-ERR_MEM_ALLOC [chars] [dec]: Could not allocate memory for [chars]

Explanation    There is not enough memory available for the EIGRP process.

Recommended Action    This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-ANCHORCOUNT [chars] [dec]: Anchor count negative

Explanation    Internal error in the flow control module in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-BADCOUNT Invalid path count for route [chars], [dec] successors, [dec] paths

Explanation    A bad reference count has been detected while adding a path for a prefix.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-INTERNAL [chars] [dec]: [chars]

Explanation    An internal error occured in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-MULTIFLOW Flow control error, [chars], on [chars]

Explanation    Error in the flow control algorithm in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-NOBUFFER No buffers available for [unsigned int] byte packet

Explanation    EIGRP could not allocate a packet buffer to transmitting a packet.

Recommended Action    The number of packet buffers available for transmitting EIGRP packets is low. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PAK_WRITE Failed to construct packet to send on [chars]. [chars]

Explanation    Error in constructing a packet, to be transmitted by EIGRP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PEERSEXIST [dec] peers exist on [chars]

Explanation    One or more peers exist on an interface which is being deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-PFXLIMIT [chars] [dec]: [chars] prefix limit reached

Explanation    'Number of prefixes for eigrp has reached the configured ' 'or default limit.'

Recommended Action    'Use 'show ip eigrp accounting' for details on the source ' 'of the prefixes and take corrective measures.'

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-RDBLEFT Interface removed, but route [chars], nexthop [chars] ([chars]), origin [chars], has path

Explanation    Routes exist over an interface being deactivated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-REFCOUNT Negative refcount in packet descriptor 0x[pointer]

Explanation    Internal reference count error in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-SIA Route [chars] stuck-in-active state in instance [dec]. Cleaning up

Explanation    Neighborship was reset to the specified peer, due to a prefix being in stuck-in-active state.

Recommended Action    Verify that there are no packet drops between the neighbors and the state of the EIGRP prefix in the neighbor. Clear the eigrp neighbor. If the CPU utilization by EIGRP remains high, restart the EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-3-UNKTIMER Unknown timer type [dec] expiration

Explanation    Unknown timer encountered in EIGRP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-ERR_SOCKET Error [chars]setting [chars] option in [chars]

Explanation    EIGRP was unable to set the specified socket option on the specified interface or VRF.

Recommended Action    If the message persists, remove and readd the affected interface or VRF and if the problem still persists, restart EIGRP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-PFXLIMITTHR [chars] [dec]: [chars] threshold prefix level reached

Explanation    'Number of prefixes in the topology database has reached ' 'the configured or default threshold level.'

Recommended Action    'Take preventive action by identifying the source of ' 'the prefixes. Use 'show ip eigrp accounting' ' 'for details.'

Error Message     
 
    
    
   

%ROUTING-EIGRP-4-WARNING [chars]

Explanation    There is a subnet mismatch between eigrp neighbors.

Recommended Action    Verify the primary IPv4 address on both ends of the specified interface.

Error Message     
 
    
    
   

%ROUTING-EIGRP-5-NBRCHANGE [chars] [dec]: Neighbor [chars] ([chars]) is [chars]: [chars]

Explanation    An EIGRP neighbor has gone UP or DOWN.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-EIGRP-6-EVENT [chars], [chars]

Explanation    An EIGRP event logged into the trace buffer.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-EIGRP-6-PAK_SEND Failed to send packet on [chars]. [chars]

Explanation    Failed to send a packet from EIGRP.

Recommended Action    This can happen if other processes involved in packet forwarding are restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EIGRP_POLICY Messages

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_INSTBUILD Failed to build [chars]: [chars] ([chars])

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_ORABUILD Failed to build ORA[chars]: [chars] ([chars])

Explanation    There was an internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-EIGRP_POLICY-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in the routing policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

EVENT Messages

Error Message     
 
    
    
   

%ROUTING-EVENT-3-ERR_MEM_ALLOC No memory, [chars]: [chars]

Explanation    Allocation of the specified resource failed because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

FIB_ForUs Messages

Error Message     
 
    
    
   

%ROUTING-FIB_ForUs-3-LIB_DEBUG_INIT The ForUs client library debug failed to initialize, event: [chars], error: [chars]

Explanation    Initialization of debugging in the ForUs client library failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB Messages

Error Message     
 
    
    
   

%ROUTING-FIB-1-FIBALLOC [chars]: [chars]

Explanation    The CEF system could not allocate the data structures needed to initialize a new forwarding table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-1-FIBTBLINIT CEF table creation failure, id:[dec] [chars]

Explanation    An internal software error occurred that prevented the creation of a new forwarding table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-BGP_ATTR_INSERT_DROP Attribute [hex] insert failed [hex], [chars].

Explanation    FIB is dropping this attribute due to error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEM_ROUTEDROP_ADDMODIFY Dropping add/modify route [chars]/[unsigned int] msg due to low memory.

Explanation    FIB is not adding or modifying this route due to a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEM_ROUTEDROP_DEL Dropping delete route [chars]/[unsigned int] msg due to low memory.

Explanation    FIB is not deleting this route due to a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEMINFO_ROUTEDROP Dropping route [chars]/[unsigned int] due to no knowlege of memory available. err [hex], [chars].

Explanation    FIB is dropping this route because it is unable to find the memory available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-NOMEMINFO_SHMERR Dropping routes due to no knowlege of memory available. err [hex], [chars].

Explanation    FIB is dropping this route because it is unable to find the memory available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-2-ROUTEDROP_UPD Dropping route update to [chars]/[unsigned int] path [dec] interface [hex]

Explanation    FIB is not processing this route update due to internal error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-ADD CEF : fail to add route for [chars] [unsigned int]

Explanation    CEF fails to add a prefix entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-BCDL BCDL failed during [chars]: [chars]

Explanation    An internal software error occurred that prevented the FIB from working properly with BCDL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-CFGREG Config registration error: [chars] [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.*

Error Message     
 
    
    
   

%ROUTING-FIB-3-CLIENT CEF CLIENT: [chars] [chars]

Explanation    CEF client internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-DELETE CEF : fail to delete route for [chars] [unsigned int]

Explanation    CEF fails to delete a prefix entry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-FIBGTRIEINIT Gtrie initialization default value failed, [chars] [chars]

Explanation    An internal software error occurred that prevented the FIB subsystem from starting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-GTRIE_DEL Gtrie delete failed, [chars]/[unsigned int] (Err: [hex], [chars])

Explanation    An internal software error occurred that prevented the FIB subsystem from removing a route

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-NOMEM Malloc Failure, [chars]

Explanation    An internal software error ocurred. CEF switching disabled on this slot.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-NOTABLE Failed to find CEF forwarding table [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-PFI_IFINFO CEF : [chars] ifh:[hex], if:

Explanation    CEF fails to connect or get information from pfi_ifh server,

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RCC CEF : rt_check_send_msg failed: [chars]

Explanation    CEF fails to send rcc error messages,

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RCC_TABLE RCC failed finding [chars] table

Explanation    The Route Consistency Checker failed finding specified table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-RPCINIT Unable to initialize CEF RCP handler: [chars] program [dec] version [dec] protocol [dec]

Explanation    The CEF system could not initialize an RPC server and therefore cannot handle show and clear commands from the parser.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SERVER CEF SERVER: [chars] [hex]

Explanation    CEF server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SERVER_CERR CEF SERVER: [chars] [chars]

Explanation    CEF server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-SHMEM Shared memory failure: error code [dec], [chars]

Explanation    An internal error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-3-THREAD Thread processing error: [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-FIBIDB Missing cef idb for ifh:[hex], , during [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-FIBIDB_LOOKUP_FAIL FIB idb lookup failed ifh [hex], if: [chars]: [hex], [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-HA [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-IM_CONN fail to connect to IM [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-INIT IP CEF initialization failure: [chars]

Explanation    Initialization of CEF failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-LTRACE_ERR Failed to open trace file: [chars]

Explanation    The FIB process was unable to open the trace buffer for automatic tracing (show trace cef may not work).

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PFI_IFH_CONN fail to connect to PFI_IFH [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-PFI_IFH_LOOKUP fail to lookup information in PFI_IFH [chars] for ifh [hex]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-4-RADIXINIT Error initializing IP CEF radix tree

Explanation    Initialization of the radix tree could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-FIB-4-WARNING FIB internal error [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-FIB-6-DEBUG_REG IPV4-FIB: Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

IGMP_MTRACE Messages

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-EVENT_ERROR Event error: [chars] in [chars]

Explanation    Event error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-INIT_ERROR Init error: [chars]

Explanation    Initialisation error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-MEMORY_ERROR Memory error: [chars] in [chars]

Explanation    Memory error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-MSG_ERROR msg error: [chars] in [chars]

Explanation    Messaging error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGMP_MTRACE-3-SOCKET_ERROR Socket error: [chars] in [chars] : [chars]

Explanation    Socket error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IGPTE_LIB Messages

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_DBG_REGISTER Error registering for IGP debug events: [hex], '[chars]'

Explanation    IGP failed to register with the debug module for printing messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_BIND Failed to bind to SysDB: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_REG_NOTIFY Failed to register for [chars] notifications: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-3-ERR_SYSDB_UNREG_NOTIFY Failed to unregister for [chars] notifications: error [hex] ([chars])

Explanation    An error occurrred when accessing the system database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-DATA_QUEUE_FULL message queue is full. Cannot accept more element.

Explanation    Data queue is full and it cannot accept more element. It could be a result of memory limitation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-ERR_CLINFO_HOLD Error in saving client's message channel information

Explanation    IGP failed to save its client's message channel information. This could be a result of channel down or resource allocation failure.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-ERR_CLINFO_UNHOLD Error in releasing client's message channel information

Explanation    IGP failed to release its client's message channel information. This could be a result of channel down already.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource. This could be because the topology is too large for the memory installed in the router.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-IGPTE_LIB-4-INVALID_TLV Data ([dec]) is too big or small([dec])

Explanation    Failed to send data due to the limitation of the buffer size. This is an internal error. It requires to reduce the number of interfaces.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

IP_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-IDB_DELETE Failed to delete idb for interface [chars] from '[chars]' thread

Explanation    The static routing process failed unexpectedly to delete an interface descriptor block from the idb WAVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-INTERNAL [chars]: [chars]

Explanation    The static routing process has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_EVENT Error processing [chars] event for [chars] from ITAL, table [hex] : [chars]

Explanation    A static routing process failed unexpectedly when processing an IP address change event. This may lead to spurious or missing connected and local routes in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_INTERFACE_CREATE Error handling create event for interface [chars]: [chars]

Explanation    The static routing process failed to correctly handle a create event for an interface which it was tracking.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-ITAL_TDB_REGISTER_FAILED A static routing process failed function ip_static_ital_vrf_register for table [chars]: [chars]

Explanation    A static routing process failed to register a table with ITAL. This may lead to routes associcated with a the failed to be added in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-NHDB_DELETE Failed to delete nhdb for next-hop [chars] for table [hex]

Explanation    The static routing process failed unexpectedly to delete an next-hop descriptor block from the nhdb AVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-PATH_BP_DELETE Failed to delete backpointer to path [chars]/[unsigned int] from [chars] [chars]

Explanation    The static routing process failed unexpectedly to delete a path from an interface or next-hop descriptor block's path backpointer list.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_BATCH [chars]: Failed to send RIB batch buffer re-populating RIB for table [hex]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB with a batch of updates.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_PREFIX Error re-installing route after a clear table event for prefix [chars]/[unsigned int] in table [hex]: [chars]

Explanation    There was an error re-installing a route in the RIB after receiving a 'clear prefix' event.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_TABLE Error re-installing routes after a clear table event for table [hex]: [chars]

Explanation    There was an error re-installing routes in the RIB after receiving a 'clear table' event.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_UNKNOWN_PREFIX Received a clear event for unknown prefix [chars]/[unsigned int] in table [hex]

Explanation    The static routing process received a clear event from RIB for a prefix which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_CLEAR_UNKNOWN_TABLE Received a clear event for unknown table [hex] (Prefix [chars])

Explanation    The static routing process received a clear event from RIB for a table which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_ECMP Failed to update RIB after ECMP recalculation for table [hex], prefix [chars]/[unsigned int]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after an ECMP recalculation.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_FETCH Error fetching event from RIB: [chars]

Explanation    The static routing process failed unexpectedly to fetch a notification event from RIB.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_FULL Failed to update RIB during full topology download for table [hex], prefix [chars]/[unsigned int]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after RIB restarted.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_INTERFACE Failed to update RIB for table [hex], prefix [chars]/[unsigned int], after receiving interface state event for [chars]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after an interface state change event.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP Failed to update RIB for table [hex], prefix [chars]/[unsigned int] after receiving next-hop resolution event for [chars]: [chars]

Explanation    The static routing process failed unexpectedly to update RIB after a next-hop resolution event.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP_REGISTER Failed to register next-hop notification with RIB for table [hex], prefix [chars]: [chars]

Explanation    The static routing process failed unexpectedly to register a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_NEXTHOP_UNREGISTER Failed to unregister next-hop notification with RIB for table [hex], prefix [chars]: [chars]

Explanation    The static routing process failed unexpectedly to unregister a next-hop resolution event. Future state change events on the next-hop may cause further messages to be generated by the static process.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-RIB_TOO_MANY_PATHS Prefix [chars]/[dec]: Maximum path count exceeded. Please remove (next-hop [chars], interface [chars]) from the running configuration.

Explanation    The maximum allowed number of next-hop paths for a single destination prefix has been exceeded. One or more paths have not been installed in the RIB, and should be removed from the running configuration.

Recommended Action    Excess next-hop paths should be removed from the running configuration.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-SHUTDOWN Process is shutting down: [chars]

Explanation    The static routing process has performed a graceful shutdown and will be restarted.

Recommended Action    Check to make sure the process has restarted. If not, restart manually Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-TDB_DELETE Failed to delete tdb for table [hex]'

Explanation    The static routing process failed unexpectedly to delete a table descriptor block from the tdb AVL tree.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-TDB_REGISTER_FAILED A static routing process failed function ip_rib_protocol_register for table [hex]: [chars]

Explanation    A static routing process failed to register a table with RIB. This may lead to routes associcated with a the failed to be added in the routing table.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-3-UPDATE_COMPLETE Failed to send 'update complete' notification to RIB for table [hex]: [chars]

Explanation    The static routing process unexpectedly failed an attempt to signal to the RIB that the given table is now in sync

Recommended Action    Check the routing table to see whether any static routes are missing, and whether the protocol is in sync. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-6-CONFIG_MAXIMUM_CHANGE The maximum number of configurations for static routes has been changed from [unsigned int] to [unsigned int]

Explanation    The maximum number of static route configurations which may be entered has been changed.

Recommended Action    Refer to the configuration guidelines for the maximum allowed limit for static routes

Error Message     
 
    
    
   

%ROUTING-IP_STATIC-7-ITAL_INTERFACE_EVENT Received a [chars] event for unknown interface [chars]

Explanation    The static routing process received a change notification event from ITAL for an interface which it was not tracking.

Recommended Action    Check the routing table to see whether any static routes are missing. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPMC_GTRIE_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-3-ERR [chars]

Explanation    This is a catch all error message. It usually means an uncorrectible problem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. GTRIE debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. GTRIE debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPMC_GTRIE_DEFAULT Messages

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-2-FATAL [chars]

Explanation    Internal error. Usually sever problems such as failing to free memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-3-INIT_ERR [chars]

Explanation    Error while initializing Gtrie. Initialization failed and aborted

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-4-INIT_WARN [chars]

Explanation    Error while initializing Gtrie. Initialization will continue

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPMC_GTRIE_DEFAULT-4-WARN [chars]

Explanation    Internal error. A significant event but we can still continue

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_ADJ Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-ADD_DB_MALLOC_FAIL Malloc Failure in trying to add adj for [chars]

Explanation    An internal software error ocurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-ENT_UPDATE Update for ifh:[hex], if:, [chars] skipped. Reason: either no fib or netio IDB

Explanation    The layer 2 adjacency could not be installed for the interface. This might cause problems in forwarding traffic to this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-L2_LOADHASH_FAIL Could not register ipv4 l2 loadhash function with AIB. Error=[chars]

Explanation    Call to register IPv4 l2 loadhash function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-3-NO_FIBIDB IP-ADJ: No fibidb

Explanation    Adding an adjacency to the adjacency database failed. Reason for this failure is no fib IDB

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-4-ADD_DB Update for ifh:[hex], if:, [chars] failed. Unable to update database

Explanation    The layer 2 adjacency could not be installed for the interface. This might cause problems in forwarding traffic to this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-4-LARGE_MAC IP-ADJ([chars]): macaddr change out of bounds

Explanation    Extra large MAC change

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-6-DEBUG_REG ipv4_adj: Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_ADJ-7-INV_MSG_CODE Unknown aib message opcode [dec]

Explanation    The event manager passed an unknown message code

Recommended Action    No action is required.

IPV4_IGMP Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-CHUNK_ERR Failed to create chunk for [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-EDM_INIT ERROR : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_ADD_ERR Fail to add [chars] into group database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_ERR Group [chars] failed: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-GROUP_FIND_ERR Fail to find [chars] in group database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_ADD_ERR Fail to add [chars] into database

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_FREE_ERR Fail to free [chars] from database: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_INIT_ERR [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_LOST_GROUPS_ERR Local joined groups on [chars] will be lost

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IDB_STATE_MONITOR_ERR Fail to monitor interface state of [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IM_BATCH_STATE_ERR Invalid state for IM state registration batch on [chars] ([chars])

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-IM_BULK_ERR Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-INIT_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-JOIN_IN_SSM_RANGE [chars] [chars] in SSM range. Join operation postponed

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-LTRACE_ERR Failed to [chars]: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-MRIB_CONN_ERR MRIB connection error - [chars] in [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-NET_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SOCK_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_BIND_ERR Sysdb Bind error for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_BSCAN_ERR Sysdb backend scan failed for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_INIT ERROR : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-SYSDB_REG_ERR Sysdb Registration error : [chars] for [chars] [[chars]]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-WDSYSMON_EVENT_ERROR Received an invalid event from WDSysmon

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-3-WDSYSMON_REGISTER_ERROR [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOM_STATE_THROTTLE Received [chars] memory depletion warning, stop creating new igmp state

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOM_STATE_UNTHROTTLE Node memory back to normal, new igmp states will be created

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-4-OOR_WARN [chars]: [dec]

Explanation    Maximum number of group accepted, either per interface or globally.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-6-ACCESS_GROUP_INFO ACL applied, removed [chars] from [chars]

Explanation    ACL applied to interface on which denied groups join previosly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_IGMP-6-IPARMS_UPDATE_ERR Dropping iparms update: type [chars] for [chars] [[hex]]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MCAST_CHKPT Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_CHKPT-3-ERR Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MCAST_NETIO_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_NETIO_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. Multicast NetIO debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MCAST_NETIO_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. Mcast netio debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ADJ_CREATE [chars] [chars] : [chars]

Explanation    Internal error: Cannot create the adjacency for a particular interface. Will retry for few times

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-BOUNDARY_FAIL [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR [chars]

Explanation    These are unexpected errors

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_FINT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_MAP Failed to map AIB table: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_AIB_ZERO_ALL [chars]: [chars]

Explanation    We were not able to set all cached adjacencies to zero when we got ELIBBAD from AIB

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_DEBUG_INIT_EVENT Failed to initialize and chain together the debug event discriptors : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_DEBUG_REG Sysdb registration for debug config failed : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_CREATE Event connection create for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_NOTIFY Event connection notify for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CONN_OPEN Event connection open for [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_CREATE Cannot create event manager : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_INIT_EVENT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_TIMER_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_EVM_TIMER_LEAF_NEW [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IDB_INIT Cannot intitialize IDB library : [chars]

Explanation    Failed while initializing IDB library.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH_INIT Failed to initialize IFH server : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IFH_UNBIND Failed to [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IM_CNTL_SVR_BIND Failed to initialize im control server connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_IMC_CAPS_DATAPATH_CONTROL im_caps_datapath_control error for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MEM_ALLOC [chars]

Explanation    These are unexpected errors

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MLIB_INIT [chars] [chars]

Explanation    Failed while initializing multicast library.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_MRIB_INIT Failed to initialize MRIB connection : [chars] failed : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_NSF_INIT Failed to initialize Multicast NSF : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_PAK_CLIENT_CONN Failed to initialize packet connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SHMWIN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BAG_REG Couldn't register bags : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_BSCAN SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_EDM_FNS_INIT SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_EDM_REG SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_REG_NOTIFY SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-ERR_SYSDB_REG_VERIFY SysDB operation [chars] failed: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-EXIT Unexpected exit

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-FROM_MRIB_UPDATE MFIB couldn't process update from MRIB : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-FROM_MRIB_UPDATE_GLACIAL MFIB couldn't process update from MRIB : [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-GEN_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-GROUP_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-HA [chars]: [chars]

Explanation    error while doing an HA operation (e.g. starting frequent restart monitor)

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IARM_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IDB_FAIL [chars] operation failed on [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-IM_LOOKUP_FAILED IM lookup failed for [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-INSTALL [chars] : [chars]

Explanation    Error while performing upgrade/downgrade/install operation

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-LRD_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_CONN_RETRY Cannot connect to [chars] using event conn Mgr after [dec] retries: [chars]

Explanation    Reached the maximum number of retries to connect to server using event conn

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_DISABLE_RETRY Failed to disable multicast after [dec] retries: [chars]

Explanation    Reached the maximum number of retries to disable multicast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-MAX_ENABLE_RETRY Failed to enable multicast [dec] retries: [chars]

Explanation    Reached the maximum number of retries to enable multicast and

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TABLE_OPERATION_FAIL [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TABLE_OPERATION_FAIL_GLACIAL [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TO_MRIB_UPDATE MFIB couldn't post update to MRIB: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TRANSACTION_PENDING_FLAG [chars] : [chars]

Explanation    Failed to clear, set, or get transaction pending flag. That can only happen if the APIs to do that are called before shared mem window is opened, or if thereis a bug

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-3-TTL_CFG_FAIL [chars] [chars]: [chars]

Explanation    Failed to apply a TTL threshold config. The operation will be retried.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ADJ_CREATE_RETRY [chars] [chars] : [chars]. Retrying

Explanation    Internal error: Cannot create the adjacency for a particular interface. Will retry for few times

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-CLEAN_ALL_FAIL [chars] [chars]

Explanation    Failure while doing all reource cleanup

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_AIB_UPDATE Failed to [chars] AIB for interface [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_LTRACE_INIT [chars] [chars]

Explanation    Error ocured while enabling mcast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_MRIB_INIT_RETRY Failed to initialize MRIB connection in [chars]. Retrying later: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_MRIB_SEND_RESPONSE_RETRY Failed to post signal to MRIB in [dec] retries. Reseting connection: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_REG [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-ERR_RETRY_TRANS_SPEC_INIT [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-4-TERMINATE [chars] [chars]

Explanation    Error ocured while disabling mcast

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-CLEAN_ALL [chars] [chars]

Explanation    Information regarding all resource cleanup

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-ERR_SHMWIN_MUTEX [chars] : [chars]

Explanation    NetIO or Mfwd terminated while holding shared mem mutex. Recovery action will be taken

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-IP_ADDR_RETRY [chars] [chars]

Explanation    APplying one or more IP address configs may have failed. We will retry them. This is a not a problem unless it keeps showing up continuously.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MCAST_DISABLED [chars] [chars]

Explanation    Most likely mfwd restarted and while it was down mcast was disabled. The other possibility is that mfwd retsarted while disabling mcast. In either case, when mfwd comes up, it will find that mcast is already disabled. Hence it will log this message and exit normally

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MFIB_RESET [chars] : [chars]

Explanation    Got notification that the the MFIB has been reset. Will clear MFIB and restart

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-MRIB_UPDATE_RETRY [chars] [chars]

Explanation    Processing one or more updates may have failed. We will retry them. This is a not a problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-ROUTE_UPDATE_FAIL [chars] Restarting to recover.

Explanation    Was not able to commit at least one route after retrying for the maximum number of times. In this case, mfwd will restart in an attempt to recover. This is not an error. It just indicates that mfwd is restarting to recover from possible stale route problem.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_PER_PREFIX Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-TABLE_PER_PREFIX_GLACIAL Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MFWD-5-UPGRADE_AFFECT_TRAFFIC [chars] [chars]

Explanation    Most likely some one tried to upgrade/downgrade mfwd while we're not connected to NetIO. In this case, teh upgrade will wipe out all MFIB and traffic will be disrupted

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MLIB_DEBUG Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-3-ERR [chars]

Explanation    This is a catch all error message. It usually means an uncorrectible problem

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-3-INIT_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal error. MLIB debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB_DEBUG-6-TERM_ERR [chars] [dec] [chars] [dec] [chars]

Explanation    Internal non-serious error. MLIB debug library termination failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MLIB Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-DATAPATH_CONTROL im_caps_datapath_control error in function [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-DELETE_FAIL Delete Failed for ([chars] [chars]/[dec]) from [chars] table [chars]

Explanation    Internal error. Deleting an entry from ingress or egress failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-EVENT_CONN_MGR Cannot open event connection manager: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-EVENT_MGR Cannot create event manager: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-SHMWIN_ERR [chars] [chars]: [chars]

Explanation    Error while doing shmwin operation

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-3-STATE_ERR [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-PER_PREFIX [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-PER_PREFIX_GLACIAL [chars] [chars]

Explanation    Error while enabling/disabling per route accounting for a route

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_MLIB-5-TABLE_PER_PREFIX Cannot [chars] per prefix accounting for table [chars]. [chars] [chars]

Explanation    Error while enabling/disabling per route accounting in a table

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_PIM Messages

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ACTIVE_GRANGE_ERR Invalid state - active grange in mrib [chars]/[dec] RP - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_CHKPT_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_CHUNK_CREATE [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_DEBUG_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_CREATE [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_EVM_HANDLER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_NOTIFY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_OPEN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_CONN_SETRETRY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_EVENT_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_EVM_MESSAGE_ATTACH [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_BATCH_STATE Invalid state for IM state registration batch on [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_BULK Failed to [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_CAPS_ADD Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_CAPS_DATAPATH_CONTROL Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_INTERFACE_CREATE Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_IM_INTERFACE_DELETE Interface Manager error - [chars] [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_LIST List error : [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_LTRACE_INIT ltrace_init failed for '[chars]': [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MEM_ALLOC for [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MGD_TIMER_GET_ROOT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MGD_TIMER_NEW [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_BIND [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_CONN MRIB connection error - [chars] : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_MRIB_UNBIND [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_NSF_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_PAK_CLIENT_CONN [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSMGR_READY [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_SYSMGR_REGISTER [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_WDSYSMON_EVENT Received an invalid event from WDSysmon

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-ERR_WDSYSMON_REGISTER [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-GEN_ERR Error - [chars] [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-IDB_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-INTF_FWD_REF_ERR Interface Forward Reference Store error - [chars]: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MDR_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MULTICAST_IGP_MTR [chars] [chars] multicast topology incorrect sysdb deletes received, refcount [dec]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-MULTICAST_INTACT [chars] multicast intact incorrect sysdb deletes received, refcount [dec]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-NET_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-OOR_COUNTER_ERR OOR [chars] counter has turned negative: [dec]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-PROTOCOL_ERR [chars] - [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-RP_INIT [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-3-SRC_UPDATE_ERR Error in [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-CFG_WARNING [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-MYADDR_DB_ERR Failed operation: [chars] for [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOM_STATE_THROTTLE Received [chars] memory depletion warning, stop creating new pim state

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOM_STATE_UNTHROTTLE Node memory back to normal, new pim states will be created

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_REGISTER_OK The number of PIM Register states ([unsigned int]) is now below the maximum. Normal PIM Register handling will resume.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_REGISTER_WARN The maximum number of PIM Register states ([unsigned int]) has been reached. Register state creation will be throttled. Configure a higher maximum or take steps to reduce Register state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_ROUTES_OK The number of PIM routes ([unsigned int]) and route-interfaces ([unsigned int]) are now below the maximum. Normal PIM route handling will resume.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-OOR_ROUTES_WARN The maximum number of PIM routes ([unsigned int]) or route-interfaces ([unsigned int]) has been reached. Route creation will be throttled. Configure a higher maximum or take steps to reduce multicast state.

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RANGE_INIT [chars] in [chars] : [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-4-RPF_INTERFACE_UNSUPPORTED RIB returns an unsupported RPF interface [chars] for [chars], ignore rib information, set RPF interface to NULL

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INTCHG PIM interface [chars] [chars]

Explanation    PIM interface state change message.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INVALID_JP PIM invalid (*, [chars]) J/P message from [chars] with RP address [chars]

Explanation    PIM invalid J/P notification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-INVALID_REGISTER PIM invalid register message from [chars] for group [chars] RP address [chars]

Explanation    PIM invalid register message notification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-NBRCHG PIM neighbor [chars] [chars] on [chars] [chars]

Explanation    PIM neighbor state change message.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-IPV4_PIM-5-RP_MAPPING_CHG PIM [chars] for [chars]/[dec] RP [chars] proto [chars]

Explanation    PIM RP mapping change notificaiton.

Recommended Action    No action is required.

IPV6_FIB Messages

Error Message     
 
    
    
   

%ROUTING-IPV6_FIB-2-RIBREJECT Rejecting RIB Update for [chars]/[dec] status [dec]

Explanation    Rejected a route update from the RIB.

Recommended Action    Try repopulating the missing route. If not recovered, it will lead to forwarding inconsistencies. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-IPV6_FIB-7-PFIFAIL PFI-IFH Server Error for [hex] status = ([dec])

Explanation    Cannot talk to the PFI-IFH process

Recommended Action    Informational message. PFI-IFH process does not have the information about the interface-handle at this very moment Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ISIS Messages

Error Message     
 
    
    
   

%ROUTING-ISIS-3-BFD_SESSION_CREATE_FAIL Can't create BFD session over [chars] to [chars]: [chars] ([hex])

Explanation    IS-IS failed to create a session with the BFD server. Creation will be reattempted on the next received IIH. Depending on the neighbor's support of BFD this may cause adjacencies to go down.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-DBG_INIT_FAILED IS-IS failed to initialize its debug resources and will abort

Explanation    IS-IS failed to initialize one of its debug services. The process cannot continue without its debug services and so will have aborted, but should have been restarted rapidly afterwards. This message will have been preceded by another one providing more precise details of the failure. The problem may be due to low memory resources and the detail of the preceding error message provides an indication of whether this is the case.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAD_SOCKET_ADDR_LENGTH Bad socket address length ([unsigned int], should be [unsigned int] or [unsigned int]) in packet 0x[pointer]

Explanation    A packet which IS-IS has received from its network socket contains a socket address with an invalid length. This is an internal error which indicates that the packet has been corrupted after being received by the local router but before being received by IS-IS. The problematic packet has been dropped. If this is an occassional problem then IS-IS should be able to continue operating normally when the packet is resent. If the message recurs, then IS-IS may start to operate incorrectly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAG_ENCODE Failed to encode data for [chars] for external data manager (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. An attempt to encode data for this has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_BAG_REGISTER Failed to register bag structures with bag server (Reason: [chars])

Explanation    The process could not register the data structures used by IS-IS statistics and management agents.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_CLOCKTIME Error retrieving or setting the time of the [chars] clock: [chars] ([hex])

Explanation    An unexpected error occurred whilst retrieving the time of a System Clock. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_CONFIG_TO_TE Error during communication of [chars] information to TE processes: [chars]

Explanation    IS-IS was unable to inform the TE processes of its configuration or basic operational state.

Recommended Action    Restart the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_ADD Failed to add an entry to an external data manager data list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_CREATE Failed to create external data manager data list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the datalist to be returned has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_DLIST_SET_MORE_FLAG Failed to set the 'more data' flag on a returned [chars] data list: error [hex] ([chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to set the 'more data' flag to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_EDM_FNS_INIT [chars] management function initialization failed: [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the handler functions for external data management. As a result, show and clear commands will not function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_EDM_REGISTER [chars] SysDB registration failed: [hex], '[chars]'

Explanation    The process could not register with SysDB for management of the data used by IS-IS statistics and management agents. As a result, show and clear commands will not function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_JOB_ID Failed system manager call to get IS-IS job_id: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to get its job_id. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_NODE_STATE Failed system manager call to get the node state information: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to get the node related state information. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_GET_TUPLE Failed system manager call to retrieve the process tag name: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to retrieve its tag name during process initialization. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LIST_ADD Failed to add an entry to an external data manager list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LIST_CREATE Failed to create external data manager list for [chars] (Reason: [chars])

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the list to be returned has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LOCKING_FAIL Unexpected error '[chars]' trying to [chars] the [chars]

Explanation    An unxpected error occurred whilst trying to lock or unlock an IS-IS resource. This implies an internal programming error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_LTRACE_BUFFER Error [chars] trace buffer '[chars]': [chars] ([hex])

Explanation    An unexpected error occurred whilst accessing a tracing buffer. This may be due to resource starvation or an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_MEMPOOL_CREATE Failed to create the [chars]

Explanation    IS-IS failed to create a memory pool. IS-IS cannot operate without this resource and will abort. The most likely cause is a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart IS-IS. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_NODE_STATE_CHANGE Failed to register with system manager to get node state change notification: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to register to get node state change notification. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_ACCESS Error [chars] a packet buffer (0x[pointer]): [chars]

Explanation    IS-IS encountered an error whilst accessing a packet buffer. The relevant packet has been ignored. The message describes the nature of the error. If the problem is transient then IS-IS will recover. The error may be due to a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. Consider restarting IS-IS.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_CONN Error [chars] the managed connection to the packet server: [chars] ([dec])

Explanation    IS-IS encountered an error whilst trying to set up a managed connection to the Packet Server. This is a serious error as IS-IS requires Packet I/O services to be able to form adjacencies, and the IS-IS process will shut itself down in response. This may be due to a low memory condition but is more likely to be a programming error. The error string and error code provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PAK_CLIENT_GET_BUFFER Error obtaining a packet buffer of length [unsigned int]

Explanation    IS-IS encountered an error whilst attempting to acquire a packet buffer to use to send a packet. The relevant packet has been dropped. The problem may be due to resource starvation. IS-IS will recover when sufficient resources become available.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PROC_AVAILABLE Failed system manager call to indicate that IS-IS has completed initialization: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to indicate that it has completed all its initialization and is now completely online. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_PROC_READY Failed system manager call to indicate that IS-IS is ready: [hex], '[chars]'

Explanation    IS-IS failed on a call to system manager to indicate that it's ready to proceed. It's an internal fatal error. IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RECV_BAD_TE_MSG Received [chars] in the [chars] message from TE

Explanation    The process has received a TE message with invalid contents. As a result, the TE message is ignored and TE tunnel may not come up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RECV_PAK Error receiving packet: [chars]

Explanation    An internal error has occurred receiving the packet. This is most likely due to some failure in a system service or a limited resource being exhausted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RIB_BATCH_BUFFER Unexpected error [chars] batch of [chars] RIB updates ([dec])

Explanation    IS-IS encountered an unexpected error whilst defining a batch of updates to be sent to the RIB. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_RIB_PATH Unexpected error installing a path to [chars] in the [chars] RIB ([dec])

Explanation    IS-IS was unable to install a path to the specified network in the the specified RIB because the RIB rejected the request. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SEND_PAK Error sending IS-IS packet: [chars]

Explanation    The process encountered an error while sending the IS-IS packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_ACCESS Error [chars] [chars] SysDB item ([chars]): [hex], '[chars]'

Explanation    An unexpected error occurred whilst accessing the specified SysDB item. This may be due to resource starvation or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_CONNECT [chars] SysDB connection could not be established at the path [chars]: [hex], '[chars]'

Explanation    IS-IS failed to bind to SysDB while opening a connection to it.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_DATALIST Error [chars] SysDB datalist containing [chars]: [chars] ([hex])

Explanation    An unexpected error occurred whilst listing the contents of a directory in SysDB. This may be due to resource starvation or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_REG_NOTIFY Failed to register for SysDB notifications on path [chars] ([chars])

Explanation    IS-IS failed to register for notification of changes on the displayed SysDB path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_REG_VERIFY Failed to [chars] ([chars])

Explanation    IS-IS failed to register for verification of changes to its configuration data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_SYSDB_STRING_CODING Error [chars] a '[chars]' string: [hex], '[chars]'

Explanation    IS-IS failed to encode or decode a string using the SysDB encoding. Aa result IS-IS will not be able to complete the operation it was performing which it encountered the error. The message describes the string which was being encoded or decoded and this should indicate the nature of the operation which was being performed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_TAG_NAME Error retrieving process tag name: [hex], '[chars]'

Explanation    An IS-IS process failed to retrieve its process tag name during process initialization. This is a fatal error and the IS-IS process will abort.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_CREATE Error starting [chars] thread: [dec]

Explanation    IS-IS failed to create a thread essential to its operation. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_KEY_CREATE Error creating '[chars]' registry for thread specific value: [chars]

Explanation    IS-IS failed to create a key to store thread specific values such as the name of a thread. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_ONCE Error performing a once per thread lifetime operation to initialize [chars]: [chars]

Explanation    IS-IS failed to initialize the specified resource. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_THREAD_SET_SPECIFIC Error associating [chars] with thread: [chars]

Explanation    IS-IS failed to associated the specified per-thread resource with the thread. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-ERR_VRFN_FNS_INIT [chars] verification function initialization failed: [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the handler functions for verification of changes to its configuration data.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The IS-IS process must be restarted before it can function correctly.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVENT_CONN_CREATE_FAIL Error creating '[chars]' connection: [chars]

Explanation    IS-IS failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_DEQUEUE_FAIL Failed to remove [chars] from the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred whilst removing the specified object from the specified queue.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_ENQUEUE_FAIL Failed to enqueue [chars] on the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred while enqueueing the specified object on the specified queue.

Recommended Action    This failure is most probably due to limited memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-EVQ_SIZE_FAIL Failed to retrieve the size of the [chars] queue: [hex], '[chars]'

Explanation    An unexpected error occurred whilst retrieving the size of the specified queue. As a result IS-IS's internal state may be inconsistent. This indicates an internal programming error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IM_CB_REG_FAIL Failed to register handler for IM [chars] events: [hex], '[chars]'

Explanation    IS-IS failed to register a handler for IM events relating to the specified protocol. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IM_CONN_TO_COID_FAIL Unexpected error retrieving connection ID from IMD connection context: [hex], '[chars]'

Explanation    IS-IS failed to retrieve a connection ID from the IMD connection context. This may be due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-INTF_SET_ADD_FAIL Failed to add [chars] to the set of [chars]: [hex], '[chars]'

Explanation    An unexpected error occurred whilst trying to add an interface to the specified collection of interfaces. This is most likely to be due to a low memory condition, but may be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-3-IPV6_LAS Error [chars] IPv6 local address consumer service: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was using the IPv6 Local Address Consumer Service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-PDU_INSUFFICIENT_SPACE Unable to [chars] due to insufficient space in outgoing PDU

Explanation    The process was unable to add information to an outgoing PDU. This is most likely an MTU issue.

Recommended Action    Check the MTUs for the interfaces over which IS-IS is running.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-TIMESTAMP Operation '[chars]' failed during packet timestamping: [hex] ([chars])

Explanation    An operation failed during timestamp processing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-3-TRIGGER Operation '[chars]' failed during log trigger processing : [chars]

Explanation    An operation failed during log trigger processing. This is not critical and IS-IS functionality should be unaffected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ADJCHANGE Adjacency to [chars] ([chars]) ([chars]) [chars], [chars]

Explanation    Adjacency to SYSTEM-ID (INTERFACE-NAME) Up|Down, REASON. The adjacency to the system with SYSTEM-ID has gone up or down due to REASON.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-AREALOST Too many IS-IS areas--cannot route to area [chars]

Explanation    Too many IS-IS areas--cannot route to area AREA-ADDRESS. This system has exceeded the limit of three learned area addresses. The largest address AREA-ADDRESS has been dropped from the list of active areas.

Recommended Action    Reduce the number of area addresses in the routing area.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_BIND_FAIL Attempt to connect to the BFD server failed: [chars] ([hex])

Explanation    IS-IS failed to connect to the BFD server. The connection will be retried.

Recommended Action    This failure may be due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_CREATE_FAIL Attempt to create [dec] BFD session[chars] failed: [chars] ([hex])

Explanation    IS-IS failed to create one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_DELETE_FAIL Attempt to delete [dec] BFD session[chars] failed: [chars] ([hex])

Explanation    IS-IS failed to delete one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_DELETE_UNCONFIG_FAIL Attempt to admin shutdown [unsigned int] BFD session[chars] as a result of deconfiguration failed: [chars] ([hex])

Explanation    IS-IS failed to admin shutdown one or more sessions with the BFD server. The connection to the server will be reset in an attempt to recover from the error.

Recommended Action    This failure may due to lack of resources. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the failure is not due to a lack of resources seek support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-BFD_SESSION_NOT_FOUND Failed to locate BFD session over [chars] to [chars] for an adjacency.

Explanation    IS-IS failed to locate a BFD session for a given adjacency. If necessary IS-IS will reconnect to the server to correct.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-CERR_REG_FAIL [chars]

Explanation    This system was unable to register the CERR DLL. This is probably due to a faulty installation.

Recommended Action    Be sure the libisis_error.dll is properly installed.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-DBG_REGISTER_FAILED Error registering for IS-IS debug events: [hex], '[chars]'

Explanation    IS-IS failed to register with the debug module for printing messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-DUPLICATE_MT_CAPABILITY Level [unsigned int] LSP [chars] contains multiple ([unsigned int]) MT capability items for [chars].[chars]%s

Explanation    The specified LSP contains multiple items advertising the same MT capability. This is an indication that the router which owns the LSP has generated its LSP incorrectly. If the MT capability items contain conflicting overload state then the message indicates this and IOS-XR determines that the router which issued the LSP is overloaded. If the MT capability items contain conflicting attached state then the message indicates this and IOS-XR determines that the router which issued the LSP is not attached.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-DUPSYSTEM Possible duplicate system ID [chars] detected

Explanation    The router with the system ID SYSTEM-ID has transmitted too many LSPs in brief period of time, which could indicate constant LSP reflooding caused by a duplicate system ID.

Recommended Action    Check the configuration of other routers in the area for duplicate IDs.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_ACL Unexpected error whilst [chars] [chars] ACL [chars]: [hex], '[chars]'

Explanation    IS-IS encountered the specified unexpected error whilst performing the specified operation on the specified access-list. As a result IS-IS's operation will not correctly reflect the contents of the ACL. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_ADVMASK Error adding IS-IS to advertising mask of [chars] ([chars]): [hex], '[chars]'

Explanation    IS-IS failed to add itself to the advertising mask for the specified route and topology, that route corresponding to a connected route on an interface over which IS-IS is running. This means that any protocols which redistribute IS-IS into themselves will not receive the specified route. The problem is most likely to be caused by a failure by ipv4-io or ipv6-io to install the route at all, although it could also be due to low memory conditions.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_CIRC_TYPE Bad circuit type ([dec]) from [chars]

Explanation    Bad circuit type (CIRCUIT-TYPE) from SOURCE_IF. This system received an IS-IS hello with a header reporting an invalid circuit type of CIRCUIT-TYPE. This is the result of a mal-formed packet rather than a configuration error. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_HDR_LENGTH The packet header length [unsigned int] is invalid for a(n) [chars], (should be [unsigned int]) from [chars]

Explanation    The packet header length (HDRLEN) is invalid for a(n) PDUTYPE, (should be EXPECTED) from SOURCE_IF This system received a PDUTYPE packet from SOURCE_IF claiming a header length of ACTUAL, rather than EXPECTED. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_ID_LENGTH Bad system ID length ([unsigned int], should be 0 or [unsigned int]) from [chars]

Explanation    Bad system ID length (ID-LENGTH, should be 0 or EXPECTED-LENGTH) from SOURCE_IF. This system received a pdu reporting an invalid system ID length of ID-LENGTH. This system only accepts values of 0 and 6 (both indicate 6). The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_MAX_AREA_ADDR Bad max area addresses ([dec], should be 0 or [dec]) from [chars]

Explanation    Bad max area addresses (MAX-AREA-ADDRESSES, should be 0 or EXPECTED-MAX) from SNPA (INTERFACE-NAME). This system received a pdu reporting an invalid number of configurable area addresses. This system only accepts values of 0 and 3 (both indicate 3). The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PAK_LENGTH The length ([unsigned int]) reported in the packet buffer is greater than the maximum packet length that IS-IS can receive ([unsigned int])

Explanation    IS-IS has received a packet which is larger than its internal buffers can handle. The packet has been ignored.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider reducing the relevant interface's MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_FORMAT [chars] received from [chars] contains a format error: [chars]

Explanation    IS-IS has received a PDU containing a format error. This indicates that the system which built the PDU is not conforming to the protocol specification. In most cases this is the neighbor, but in the case of LSPs it is the system which generated the LSP. The message contains the type of the PDU, the interface it was received over (and, in the case of a LAN interface, the SNPA), and a description of the format error. IS-IS will not use any of the information contained in this PDU. In the case of an LSP, IS-IS will not flood the LSP to neighbors.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_LENGTH The length ([unsigned int]) reported in the [chars] header is greater than the packet length ([unsigned int]) from [chars]

Explanation    The length (PDU_LENGTH) reported in the PDUTYPE header is greater than packet length (PKTLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_PDU_VERSION The PDU version reported in the IS-IS header is invalid ([unsigned int], should be [unsigned int]) from [chars]

Explanation    The PDU version reported in the IS-IS header is invalid (VERSION, should be EXPECTED) from SNPA (INTERFACE-NAME) This system received a protocol packet bearing an invalid VERSION in the header. The router originating the packet is either placing the wrong protocol version number in the packet, or else it is running an incompatible version of the IS-IS protocol.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BAD_VERSION Bad protocol version ([dec], should be [dec]) from [chars]

Explanation    Bad protocol version (VERSION, should be EXPECTED-VERSION) from SOURCE_IF. This system received a pdu with an invalid protocol version of VERSION instead of EXPECTED-VERSION. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BGP_CONVERGE Overload bit not set due to failure in registering for BGP convergence: [hex], '[chars]'

Explanation    IS-IS is configured to set the overload bit in its LSPs upon startup and to wait for BGP to converge before resetting the overload bit, but an error has occurred whilst registering for notification of BGP convergence. As a result, the overload bit will not have been set upon startup. This may be due to a low-memory condition but may also be due to internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_BGP_UNREG_NOTIFY Error unregistering for BGP convergence notification: [hex], '[chars]'

Explanation    IS-IS failed to unregister for notification of BGP convergence. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_ATT_FAIL Failed to register a handler for '[chars]' messages: [chars]

Explanation    IS-IS failed to register a handler for the specified class of event. This is an initialization error and implies that IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_CBACK_ATT_FAIL Failed to register a [chars] callback handler: [chars]

Explanation    IS-IS failed to register a callback handler due to the error. This is an initialization error and implies that the function in IS-IS will not be able to operate correctly. The IS-IS process must be restarted in order to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_CRE_FAIL Failed to create [chars] Event Manager: [chars]

Explanation    IS-IS failed to create an Event Manager to receive events in the specified thread. This is most likely to be caused by a resource starvation problem, but may also be due to an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_EVM_SEND_FAIL Failed to send '[chars]' to '[chars]': [chars]

Explanation    IS-IS failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_LSP_DB_CORRUPT L[unsigned int] LSP database checksum verification failed for LSP [chars]. IS-IS will restart itself

Explanation    A corrupt LSP was found during a periodic check of the sanity of the specified level's LSP database. When it encounters this condition the IS-IS process restarts itself to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_LSP_INPUT_Q_OVERFLOW LSP input queue overflow: [unsigned int] total drops; [unsigned int] LSP drops, [unsigned int] SNP drops

Explanation    An incoming LSP or SNP pdu was dropped because the input queue was full

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MEMPOOL_NOMEM Failed to allocate [unsigned int] bytes from '[chars]'

Explanation    IS-IS failed to allocate memory from the specified pool.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MIN_PDU_LENGTH The length ([unsigned int]) described in the [chars] header is smaller than the minimum ([unsigned int]) from [chars]

Explanation    The length (PDU_LENGTH) described in the PDUTYPE header is smaller than the minimum (MINLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MIN_PKT_LENGTH The length ([unsigned int]) of the [chars] received from [chars] is smaller than the minimum ([unsigned int])

Explanation    The length (PKTLEN) of the PDUTYPE received from the interface SOURCE is smaller than the minimum (MINLEN) This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.

Recommended Action    Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_CHAN_GLOBAL Error changing a local message channel setting to [chars]: [chars] ([dec])

Explanation    IS-IS failed to convert a local connection channel to a global connection channel. This could be the result of a problem with the channel.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_GET_SCOID Error retrieving client's connection ID to the [chars] channel: [chars] ([dec])

Explanation    IS-IS failed to retrieve its local connection ID for a client attached to the specified channel. This is an internal programming error.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_MSG_REPLY Error replying to the client [chars]: [chars] ([dec])

Explanation    IS-IS failed to reply to its client through message channel. This could be a result of channel down or resource allocation failure.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_PCL Unexpected error whilst [chars]: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified using the Route Policy client library. As a result information may be omitted from the local system's LSPs. This may be due to a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB Unexpected error whilst [chars] the [chars] RIB: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified RIB operation. This may be a resource starvation problem but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_BATCH_SEND Unexpected error sending a batch of [chars] RIB updates ([dec])

Explanation    IS-IS encountered an unexpected error whilst sending a batch of RIB updates to the RIB. This may be a resource starvation problem, or a problem with IS-IS's connection to the RIB, or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_CONN_SETRETRY Error setting the RIB linear retry period: [hex] '[chars]'

Explanation    IS-IS failed to set the linear retry period for connecting to the RIB. This error will not affect IS-IS operation but does indicate an unexpected result.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_LIB Unexpected error whilst [chars]: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error whilst performing the specified operation using the RIB client library. This may be a resource starvation problem but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_RIB_PATH_NOMEM Insufficient memory whilst installing a path to [chars] in the [chars] RIB

Explanation    IS-IS was unable to install a path to the specified network in the RIB because the RIB encountered a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SHOW_PROTO_REG Error registering show protocol information: [hex], '[chars]'

Explanation    IS-IS failed to register for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SYSDB_DISCONNECT Error disconnecting [chars] SysDB connection: [hex], '[chars]'

Explanation    IS-IS failed to disconnect from SysDB. The error will not affect IS-IS operation but does indicate that a programming error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_SYSDB_UNREG_NOTIFY Error unregistering for SysDB notification: [hex], '[chars]'

Explanation    IS-IS failed to unregister for notification of changes on the displayed SysDB path. The error will not affect IS-IS operation but does indicate unexpected system behavior.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_THREAD_DESTROY Error destroying [chars] thread: [dec]

Explanation    IS-IS failed to destroy a thread. This is an internal error. If the error occurred whilst unconfiguring IS-IS then it may be necessary to forcefully terminate the IS-IS process. If the error occurred during normal operation then it may be necessary to restart the IS-IS process to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_THREAD_SET_NAME Error setting name of thread [dec] to [chars]: [chars] ([hex])

Explanation    An unexpected error occurred whilst setting a thread name. This may be due to resource starvation or an internal programming error. This is not a fatal error as the name is only used for debugging and error messages.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ERR_WDSYSMON_MEM_STATE Unexpected error whilst [chars] for memory state changes: [chars] ([hex])

Explanation    IS-IS encountered an error whilst registering or deregistering with WDSysMon for notifications of changes to the router's memory state. If the error occurs during registration (i.e. when the IS-IS process is initializing) then it will abort and the system may recover automatically when the IS-IS process is restarted. If the error occurs during deregistration (i.e. when the IS-IS process is shutting down) then it is harmless and may be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_BOOL_FAIL Error [chars] the '[chars]' trigger: [hex], '[chars]'

Explanation    IS-IS encountered an unexpected error using one of the infrastructure libraries. This may be due to a low memory condition but is more likely to be a programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_ERROR_FAIL Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, IS-IS failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_EVM_HANDLER_FAIL Error registering for data events on '[chars]' connection: [chars]

Explanation    During initialization, IS-IS failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_GET_FD_FAIL Error retrieving the Connection ID from the '[chars]' connection: [chars]

Explanation    IS-IS failed to retrieve the file descriptor associated with the specified service. This is an internal error.

Recommended Action    Consider restarting the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_NOTIFY_FAIL Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, IS-IS failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVENT_CONN_OPEN_FAIL Error opening '[chars]' connection: [chars]

Explanation    IS-IS failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EVQ_CRE_FAIL Failed to create the [chars] event queue: [hex], '[chars]'

Explanation    An unexpected error occured whilst creating an event queue during process initialization. This may be a system resource problem. As a result IS-IS will be unable to operate correctly.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-EXTRA_AREA_ADDRESSES Area address TLV length [dec] contains more than ISIS_MAX_AREA_ADDRESSES from [chars] ([chars]).

Explanation    Area address TLV length TLV_LENGTH contains more than ISIS_MAX_AREA_ADDRESSES from SNPA_STRING (INTERFACE_NAME). This system recieved a hello or LSP containing more than the maximum number of area addresses. The additional addresses have been ignored.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IDB_CHKPT_CLEANUP Unexpected objid [hex] for [chars] (CSCek33169) collect log and tech-support

Explanation    This is not critical and IS-IS functionality should be unaffected. A non-null OBJID for INTERFACE-NAME was encountered.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IIH_TOO_MANY_IF_ADDRESSES [chars] has more [chars] interface addresses than can fit into a single TLV (255 bytes). Outgoing IIHs can only include the first [unsigned int] addresses.

Explanation    The specified interface has more addresses than can be fitted into a single TLV (255 bytes). RFC 1195 specifies that each IIH may contain at most one IPv4 Interface Address TLV, i.e. 63 IPv4 addresses. Thus if there are more than 63 IPv4 addresses configured on the interface then only 63 addresses are included in the IIH. If the interface has a primary address it is always included first. The secondary addresses are added in their natural numerical order until there is no more space. If there is an IS on the LAN which does not share a subnet with any of the advertised addresses then it will not be able to form an adjacency with this IS. This problem should not apply to IPv6 as each interface should have a single link local address.

Recommended Action    Reduce the number of addresses configured on the interface so that they can all fit within a single TLV.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_ATTR_INIT Error initializing the IM attribute library: [hex] '[chars]''

Explanation    IS-IS failed to initialize the IM attribute library. This error will prevent IS-IS from normal operations.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_CAPS_UNKNOWN IM notification received for an unknown and unexpected capsulation number: [unsigned int]

Explanation    IS-IS has received an IM message referring to a capsulation number that IS-IS does not recognized and is not able to handle. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IM_CB_NAME_TRUNC Interface Manager context name '[chars]' length exceeds string length limit of [dec]; truncated to '[chars]'

Explanation    The length of the context string used to register for Interface Manager callbacks exceeded internal limits and was truncated. If truncation results in registration contexts no longer being unique, this could cause problems with event registrations.

Recommended Action    This should not happen. The condition represents an internal error.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_ADDR_CHG_REG Error during registration for interface IP address changes: [chars]

Explanation    IS-IS failed to register for notification of interface IP address changes. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_ATTR_FAIL Failure while [chars] on [chars]: [hex] '[chars]''

Explanation    A call to the IM attribute library failed. This can be caused by faulty hardware, or it may indicate an interface resource is currently unavailable. Recovery may require a restart of the IS-IS process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CKTNUM_ALLOC_FAIL Failed to allocate circuit ID to interface [chars]: all [dec] IDs already in use

Explanation    IS-IS failed to allocate a circuit ID to the specified LAN interface.

Recommended Action    Reduce the number of LAN interfaces over which IS-IS is running.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_CLIENT_INIT Failed to initialize CLNS interface registery: [chars]

Explanation    IS-IS failed to initialize its interface registration process wth CLNS It requires a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_MAC_ADDR_NOTIFY Failed to notify CLNS of a MAC address change on interface [chars]: [chars]

Explanation    IS-IS failed to notify the CLNS protocol stack of MAC address changes to the specified interface. It requires a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_NOTIFY Failed to add the CLNS stack on interface [chars]: [chars]

Explanation    IS-IS failed to add the CLNS protocol stack on the specified interface. It requires a restart of process for recovery.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_CLNS_REMOVE_CAP Failed to remove the CLNS stack on interface [chars]: [chars]

Explanation    IS-IS failed to remove the CLNS protocol stack on the specified interface.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_FIND_FAIL Failed to lookup Interface Handle for interface [chars]: [hex] '[chars]'

Explanation    An unexpected error occurred looking up an interface handle from an interface name. This may be due to a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_FWS_INIT Error during initialization of forward-referenced interface store: [chars]

Explanation    IS-IS failed to initialize its storage for forward-referenced interfaces. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_IM_REG_FAIL Error registering for [chars] [chars] changes on interface [chars]: [hex], '[chars]'

Explanation    IS-IS failed to register for notification of the specified changes on the specified interface and protocol. This may be an internal programming error, but is most likely to be a resource starvation problem.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider disabling and reenabling the interface within IS-IS configuration, or restarting the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_INACTIVE_AF Unexpected [chars] [chars] notification on [chars]

Explanation    The specified event was unexpected because the address family is not active on that interface. The operation of IS-IS is not affected by this message and it may safely be ignored. The message is due to an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_LAS_FAIL Failed [chars] [chars] link local addresses on [chars]: [hex], '[chars]'

Explanation    An unexpected error occurred whilst accessing the link-local address details for the specified interface. As a result IS-IS will not be able to use the specified address-family on the specified interface. This could be due to a low memory condition or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MAC_SIZE_ERR Incorrect MAC address size for [chars] (returned: [dec], expected: [dec])

Explanation    The MAC address size returned for the specified interface does not match the expected size (6 bytes). This can be caused by a faulty hardware.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MCAST_JOIN_FAIL Error joining [chars] multicast group on [chars]: [chars]

Explanation    IS-IS was unable to join the specified multicast group on the specified interface.

Recommended Action    Restart the affected interface and, if the problem recurs, the IS-IS process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MCAST_SIZE_ERR The multicast address is too large for [chars] (supplied: [dec], maximum: [dec])

Explanation    The multicast address requested for the specified interface is larger than the maximum permissible size. This requires restarting the IS-IS process.

Recommended Action    Restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MTU_REDUCED IS-IS MTU value of [unsigned int] on [chars] adjusted to [unsigned int] to accommodate fabric MTU

Explanation    The IS-IS MTU was adjusted to accommodate the fabric MTU of the system. This new MTU may be smaller than the actual MTU allowable by the physical interface.

Recommended Action    Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_MTU_TOO_SMALL CLNS MTU value of [unsigned int] on [chars] is too small. Minimum acceptable value is [unsigned int]

Explanation    The MTU for CLNS on the specified interface is too small to allow IS-IS to send packets over that interface. This may be due to a configuration error or an internal error.

Recommended Action    Check any MTU configuration for the interface to ensure that this is not a configuration error. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_NAME_FAIL Failed to lookup an interface name from its handle ([hex]): [hex], '[chars]'

Explanation    An unexpected error occurred looking up an interface's name from it's handle. The error code should provide an indication of what the problem is. The most likely explanation is that the interface with the specified handle no longer exists although the message may be caused by low memory conditions or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_NSF_MEDIA_MISMATCH Media class mismatch between checkpoint table ([chars]) and reality ([chars]) on interface [chars]

Explanation    IS-IS has detected a mismatch between the media class (i.e. Point to Point vs. LAN) of an interface as determined by IS-IS's checkpoint state and IM. As a result the interface will not participate in the NSF restart. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_STORE_FAIL Error [chars] [chars] [chars] internal [chars] store: [hex], [chars]

Explanation    IS-IS was unable to perform the specified operation on the specified interface. This is most likely to be a resource starvation problem, but may be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-ISIS-4-INTF_UNKNOWN_MEDIA Unknown or unsupported interface media type ([chars]) on [chars]

Explanation    This interface media is not supported by IS-IS. An IS-IS process restart is required for recovery.

Recommended Action    Check the interface media name in the configuration and restart the IS-IS process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-IP_ARM_ADDR_INFO_FAIL Failed to [chars] for [chars] address information: [hex], '[chars]'

Explanation    IS-IS has encountered an error whilst manipulating a set of interface IP addresses. This may be a resource starvation problem or an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ITEMSIZE add_item_entry called with size [dec]: errant entry was not added to the LSP

Explanation    add_item_entry called with size SIZE. An internal error occurred while this system was trying to construct its LSPs. The errant entry was not added to the LSP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LINK_TO_SELF Level [unsigned int] LSP [chars] contains a link advertsisement to itself ([chars] MT ID). This link will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a link advertisement to itself and this link has been ignored. There is no possible impact to routing as the link would not be used by other routers in their calculations. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a link.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPCKSUM Bad L[dec] LSP [chars] checksum [hex] received on [chars], length [dec], should be [hex], bad count [dec]

Explanation    Bad L-# LSP LSP-ID checksum ACTUAL-CKSUM received on INTERFACE-NAME, length PDU-LENGTH should be EXPECTED-CKSUM, bad count CKSUM-ERROR-COUNT. This system received a level L-# LSP with a wrong checksum. If the IS-IS configuration option 'isis-ignore-cksum-errors' is set, the packet has been ignored. Otherwise it has been handled according to the specification.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPFULL L[unsigned int] LSP filled to capacity, dropping routes

Explanation    L-LEVEL LSP filled to capacity, dropping routes. This system cannot originate any more routes or adjacencies because it cannot build any more LSP fragments in which to advertise them.

Recommended Action    This is usually caused by a misconfiguration, such as redistributing a large number of routes into IS-IS. Reduce the number of routes being redistributed into IS-IS to correct the problem.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-LSPTOOBIG L[dec] LSP [chars] size [dec] bigger than interface [chars] MTU [dec], LSP dropped

Explanation    L-LEVEL LSP LSP-ID size LSP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, LSP dropped. This system was unable to flood an LSP out INTERFACE-NAME because the interface MTU was too small. The LSP has not been transmitted on the interface.

Recommended Action    Configure the routing area and the interfaces with a consistent MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MARTIAN Level [unsigned int] LSP [chars] contains an [chars] prefix advertsisement to the invalid prefix [chars]. This prefix will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a prefix advertisement to an invalid martian prefix and the prefix has been ignored. As the prefix is invalid there should be no impact to routing as no traffic should be destined to the prefix. This message is however indicative of a problem in the router which issued the LSP as it should not have advertised such a prefix.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MAX_REDIST_PREFIXES Topology [chars] level [unsigned int] is [chars]exceeding the maximum number of redistributed prefixes

Explanation    This configuration is redistibuting more than the allowable number of prefixes into an IS-IS topology. IS-IS will not advertise some of these routes. This is to prevent inadvertant redistribution of the Internet via IS-IS.

Recommended Action    Consider reconfiguring route redistribution into the IS-IS process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MEM_ALLOC_FAIL Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource. This could be because the IS-IS topology is too large for the memory installed in the router.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-MGD_TIMER_FAIL Error [chars] the [chars] [chars] timer: [chars]

Explanation    IS-IS encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS process. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_ACCESS_FAIL Failed to [chars] checkpoint record(s) [chars] [chars] table: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was accessing entries in the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. If however the error does not recur then the checkpoint tables should synchronize. The error may be caused by a low memory condition or through programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_INIT NSF checkpoint init failure, [hex], '[chars]'

Explanation    The IS-IS process failed to initialize the checkpoint service for the specified error reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CHKPT_TABLE_FAIL Failed to [chars] [chars] checkpoint table: [hex], '[chars]'

Explanation    An unexpected error occurred whilst IS-IS was accessing the specified checkpoint table. If this error occurs during an NSF Cisco restart then that NSF restart may be aborted in favour of a traditional restart. If this error occurs during normal operation then the relevant checkpoint table may not be correct, and a subsequent NSF restart may not succeed. The error may be caused by a low memory condition or through programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-NSF_CREATE_FAIL Failed to create L[unsigned int] NSF adjacency to [chars] ([chars]) ([chars])

Explanation    TBD.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-OSI_SOKT_FAIL Socket operation '[chars]' failed: [chars]

Explanation    Failed to perform a socket operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-P2P_CONFIG_MISMATCH L[unsigned int] [chars] configuration on P2P interface [chars] will not be used

Explanation    Any level specific configuration on a P2P interface is ignored. The configuration may be accepted but not used if the interface type is unknown or changed later to point-to-point.

Recommended Action    Configure the same parameter without using any level extension.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-REDIST_FAIL Error [chars] for redistribution of routes from [chars] [chars] into IS-IS

Explanation    The RIB returned an unexpected error when IS-IS attempted to (de)register for the redistribution of routes in the specified topology and owned by the specified protocol. If this is a registration error then routes from the specified protocol may not be advertised in IS-IS's system LSPs. If this is a deregistration error then IS-IS may receive unnecessary redistribution updates from the RIB but the system LSPs will be correctly generated. The problem may be caused by a low memory condition but is most likely to be an internal programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the IS-IS and/or the RIB processes. *RECUR*.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SEQNUM_WRAP Sequence number wrapped in LSP [chars].

Explanation    An LSP originated by this system has had its sequence number wrap around to 0. The IS-IS specification states that this system should shutdown for 20 minutes waiting for the LSP to age out before resuming routing.

Recommended Action    This condition can only occur if a network has been operational for several years, or if a network has been misconfigured for a long time. Disable the IS-IS routing process for max-lsp-lifetime and then restart it to clear the problem. Alternative approaches include changing the SYSTEM-ID or, if this occurred with a pseudo-node LSP, lowering the priority of the interface.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SETSOCKOPT_FAIL Error setting the value of the '[chars]' IS-IS network socket option to '[chars]' (length [unsigned int]): [chars]

Explanation    IS-IS encountered an error whilst configuring the socket it uses for network I/O. As a result the socket is unuseable and IS-IS cannot perform I/O. IS-IS will attempt to recover by closing the current socket and schedule an attempt to reconnect.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.. Consider restarting the IS-IS process.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SHOW_NOMEM Internal memory allocation failure, display incomplete

Explanation    The requested display output may be incomplete due to an internal memory allocation problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SHUTDOWN Process is shutting down ([chars]): [chars]

Explanation    IS-IS has encountered a problem which means that is no longer able to continue and so it is shutting down. The message includes a brief description of the problem but will also have been preceded by another message providing a more detailed description of the problem. There are several types of reason why IS-IS may have to shutdown which include a fatal error during process initialization, a fatal problem with a critical service during normal operation, and a roll-over of one of the local system's LSP's sequence numbers. The message also describes whether or not IS-IS has automatically been restarted.

Recommended Action    Follow the instructions associated with the preceding message. If an automatic restart has been scheduled, then IS-IS may recover automatically. If a manual restart is required, then 'process start isis' is required to recover.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-SNPTOOBIG L[dec] SNP size [dec] too big for interface [chars] MTU [dec], trimmed to interface MTU

Explanation    L-LEVEL SNP size SNP-LENGTH bigger than interface INTERFACE-NAME MTU INTERFACE-MTR, trimmed to interface MTU This system was unable to flood an SNP out INTERFACE-NAME because the LSP MTU setting is too big for the interface MTU. The SNP packet size was trimmed to fit the interface MTU.

Recommended Action    Configure the LSP MTU to a size that will fit within the interface MTU.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-TIMESTAMP_FAIL Error recording a timestamp ([dec])

Explanation    An unexpected error occurred whilst recording a timestamp. This implies an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-UNKNOWN_ADDRESS_FAMILY Unknown address family [unsigned int]

Explanation    IS-IS has encountered an unrecognized address family ID. This is an internal programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-4-WD_METRIC_NOT_CONF In the topology [chars] [chars] has a wide metric of [unsigned int] but level L[unsigned int] is configured to generate narrow metrics. Maximum narrow value [unsigned int] is used instead

Explanation    The specified interface and topology has been configured with a metric value that requires metric-style wide to be configured for the relevant level.

Recommended Action    Configure metric-style wide for the topology and area.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ZERO_COST_LINK Level [unsigned int] LSP [chars] contains an invalid link advertsisement to [chars] ([chars] MT ID) with a metric of 0. This link will be ignored in subsequent route calculations.

Explanation    The specified LSP contains a link advertisement with an invalid metric of 0. Zero cost links have the potential to break the SPF algorithm and are not permitted by the IS-IS specification (ISO 10589 version 2) and so the IOS-XR router will ignore the link in any subsequent route calculations. As a result traffic which should be routed via the affected routers may be dropped or enter a routing loop.

Recommended Action    Identify the source of the offending packet and correct it.

Error Message     
 
    
    
   

%ROUTING-ISIS-4-ZEROHOLDTIME IIH zero holdtime from [chars]

Explanation    IS-IS has received an IIH containing a zero holdtime from a neighbor with which no adjacency currently exists. The IIH has been discarded. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-5-AUTH_FAILURE_DROP Dropped [chars] from [chars] due to [chars]

Explanation    The process encountered an error when authenticating an incoming PDU and dropped the PDU. This may be due to misconfiguration on the local or remote system.

Recommended Action    Check the password configuration on the local and remote systems.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-ADJNSF [chars] L[unsigned int]: Neighbor [chars] [chars]

Explanation    The adjacency on the INTERFACE-NAME and LEVEL with the system SYSTEM-ID STARTED responding or STOPPED responding during the NSF-restart of the SYSTEM-ID.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-DBG_UNKNOWN_TRACEPOINT_NAME Unknown debug filter tracepoint name [chars]

Explanation    An unknown tracepoint name requested for a debug filter.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-ERR_DUPID Duplicate System ID [chars] already used by [chars] detected in IIH received on [chars]

Explanation    IS-IS has received an IIH from a router claiming to have the same System ID as either the local system or another station on a LAN interface. The message indicates the interface and, in the case of a LAN interface, the SNPA from which the IIH was received. It also indicates whether we ourselves use this system ID, or the SNPA of the other station using the system ID.

Recommended Action    Duplicate system IDs are usually the result of misconfiguration or a bridging loop in the network. Configure each router with a unique system ID, and ensure that there are no bridging loops in the network.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVENT_CONN_DESTROY_FAIL Error destroying '[chars]' connection: [chars]

Explanation    During process termination IS-IS failed to destroy a connection to a service provided by another process. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVENT_ERR Event handler error [dec]

Explanation    Event handler error ERRNO. This system encountered an error ERRNO trying to get an event from the event handler.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-EVQ_DESTROY_FAIL Failed to destroy the [chars] event queue [hex]: [hex], '[chars]'

Explanation    An unexpected error occured whilst destroying an event queue. This is an internal programming error, but will not affect protocol operation as it occurred whilst IS-IS was destroying resources which are no longer required.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%ROUTING-ISIS-6-FAIL_ADJADD Failed to create adjacency for [chars] ([chars]): [chars]

Explanation    Failed to create adjacency to the displayed IS via the displayed interface for the reason specified.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-IIH_IF_ADDRESS IIH received from [chars] contains [chars] [chars] interface address: [chars]

Explanation    IS-IS received an IIH from the specified source containing an invalid and potentially unusable interface address for the specified address family. The message contains details of why the interface address is invalid. The message implies that the router sending the bad IIH is either misconfigured or is not conforming to the IS-IS specification. If the message describes the address as unusable, then IS-IS is not able to use the adjacency as a next hop for the specified address family. Otherwise IS-IS will still attempt to use the adjacency as a next hop.

Recommended Action    Using the contents of the error message as a guide, check the configuration of the router sourcing the IIH or contact the router's vendor.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_ABORTED [chars] controlled start aborted. Reason: [chars]

Explanation    Startup state-machine controlled startup aborted for the specified reason. Some of the reasons indicate an internal software error, or the failure of anther software service. Other reasons are due to configuration or other operational problems.

Recommended Action    If the indicated reason can be corrected with configuration changes, then do so; otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_FINISH [chars] controlled start completed

Explanation    Startup state-machine controlled startup process ends here.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_FORCED_COLD Resorting to cold start: [chars].

Explanation    The startup state-machine has determined that a cold (re)start must be performed regardless of current NSF configuration for the reason specified.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-INFO_STARTUP_START [chars] controlled start beginning

Explanation    Startup state-machine controlled startup process begins here.

Recommended Action    None.

Error Message     
 
    
    
   

%ROUTING-ISIS-6-NO_INPUTBUF Unable to allocate input buffer

Explanation    This system failed to allocate an input buffer because there was insufficient memory to do so.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_CREATEMQ Error in creating message queue to MPLS

Explanation    The process failed to create a message queue to communicate with MPLS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_MSG Error in reading message: [chars]

Explanation    The process failed to read the message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_MSGLEN Error in reading message length: [chars]

Explanation    The process failed to read the message length.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_RCV_PAKTYPE Invalid IS-IS packet type [unsigned int] received on [chars] ([chars] code)

Explanation    An invalid packet was received on the specified interface (and, in the case of a LAN interface, SNPA). The packet is invalid because its type code is either unrecognized or inappropriate (e.g. a point to point IIH on a LAN interface). The packet has been ignored.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_RECV_TE_MSG Received an invalid length TE message for [chars]: expected ([unsigned int]), received ([unsigned int])

Explanation    The process has received an invalid length TE message. As a result, the TE message is ignored and TE tunnel may not come up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-ERR_SEND_TE_MSG Failed to send a [chars] message to TE

Explanation    The process encountered an error while sending message to TE.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ISIS-7-STALE_PNODE_PURGE Skipping stale purge event for L[dec] LSP [chars] pseudo-node

Explanation    The router has re-elected itself DIS after initiating a purge of its L-LEVEL LSP LSP-ID due to a previous resignation.

Recommended Action    No action is required.

LDP Messages

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_BACKEND Backend scan failed for '[chars]': [chars]

Explanation    LDP failed backend scan for some tuple path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_LSD_INTF LSD mpls_interface '[chars]' failed for '[chars]': [chars]

Explanation    LDP encountered some problem while trying to enable/disable MPLS on an interface via LSD server.

Recommended Action    Make sure that LSD is running and LDP is connected/registered with it.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_LSD_REG LSD application registration failed: [chars]

Explanation    LDP encountered a problem while trying to register with LSD server.

Recommended Action    Make sure that LSD is running and LDP is connected to it.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_MEM_ALLOC No memory for '[chars]'

Explanation    The requested operation failed due to low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-LDP-3-ERR_THREAD_CREATE Error starting '[chars]' thread: [chars]. Process restarting

Explanation    LDP failed to create a thread essential to its operation. This is an internal error. A restart of the LDP process is intitiated to attempt recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-BAD_PDU_LENGTH A message with botched PDU length is received from peer [chars]

Explanation    A message with botched PDU length is received from the network.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-BAD_TLV TLV Check failed for a message (type [hex]) received from peer [chars]

Explanation    A message with a bad TLV is received from the network.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-4-DEPRECATED_RTRID 'router-id command is deprecated. Delete 'router-id [chars]' and reconfigure 'router-id '.

Explanation    MPLS LDP 'router-id ' command is deprecated.

Recommended Action    Use 'router-id '.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR GR session [chars] (instance [dec]) [chars]

Explanation    An LDP GR session state change has occured - such as disconnected, reconnected, timed out. This message appears only if the log graceful-restart command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-GR_RESTART_COMPLETE GR forwarding state hold timer has expired

Explanation    After LDP local restart, LDP GR forwarding state hold timer has expired, and MPLS forwarding is now being updated and reinstated by LDP application. This message appears only if the log graceful-restart command is configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-NBR_CHANGE Neighbor [chars], [chars] [chars]

Explanation    A LDP neighbor has changed state (up/down). If neighbor has went down, then a reason for session going down is also displayed. This message appears only if the log neighbor command is configured for the LDP process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-SESSION_PROTECTION [chars] for peer [chars]

Explanation    An informational LDP notice was generated for a Session Protection event.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-LDP-5-SHUTDOWN LDP process is shutting down due to '[chars]' memory state.

Explanation    LDP process exiting due to unknown/critical node memory state.

Recommended Action    Start 'mpls_ldp' process after memory state goes normal.

Error Message     
 
    
    
   

%ROUTING-LDP-6-ISYNC_CHKPT_LIMIT Limit reached for maximum ([dec]) number of neighbors per interface

Explanation    LDP checkpointing has limit for maximum number of neighbors per interface due to LDP IGP Sync feature requirements. It is not recommended to cross the limit provided by Engineering. If crossed, undesired affects can be seen and LDP IGP Sync feature may not work.

Recommended Action    Limit number of neighbors to the value as provided in Engineering guidelines

Error Message     
 
    
    
   

%ROUTING-LDP-6-UNKNOWN_MPLS_APP Received an unknown protocol [chars] message [chars] from peer [chars] ([chars])

Explanation    A Label Distribution Protocol (LDP) message with an unknown label type and/or address family has been received from a peer, and the message has been dropped.

Recommended Action    ACTION_COPY_REPORT_TDP

Error Message     
 
    
    
   

%ROUTING-LDP-7-ERR_INIT '[chars]' ([chars])

Explanation    An internal system error occurred during initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LDP-7-ERR_INIT_FATAL Failed to initialize '[chars]': [chars]. Process now terminating

Explanation    A fatal error occurred during initialization of an LDP subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LSPV Messages

Error Message     
 
    
    
   

%ROUTING-LSPV-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-4-show_timeout [chars]

Explanation    It was not possible to obtain the lock required to access the databases. This may be due to the main thread being very busy processing events.

Recommended Action    Wait a few minutes, and re-attempt to issue the show command.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_EVENT [chars] failed: error=[hex] ([chars])

Explanation    Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_GENERAL [chars] failed: error=[hex] ([chars])

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_INIT Failed to init '[chars]'. Process now terminating

Explanation    Initialization of some subsystem failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_INIT_RC Failed to init '[chars]': error=[hex] ([chars]). Process now terminating

Explanation    Initialization of some subsystem failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-LSPV-7-ERR_TIMER [chars] failed: error=[hex] ([chars])

Explanation    Some error occured in operations with mdg timers. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MFWD_MA Messages

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-CFG_ERR [chars] cfg counter already 0. Can't decrement : Item is [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_DEBUG_INIT_EVENT Failed to initialize and chain together the debug event discriptors : [chars]

Explanation    An error related to the debugging subsystem occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_DEBUG_REG Sysdb registration for debug config failed : [chars]

Explanation    An error related to the debugging subsystem occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_ASYNC_ATTACH [chars] : [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_CREATE Event connection create for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_NOTIFY Event connection notify for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CONN_OPEN Event connection open for [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_EVM_CREATE Cannot create event manager : [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_IMC_CONTROL_SERVER_BIND Error in imc control server bind : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_LTRACE_INIT [chars] : [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_MEM_ALLOC [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_DECODE Error in bag decoding : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS Error in bag free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BAG_REG Cannot register bags : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_BIND Error in sysdb bind : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_DATALIST_FREE Error in datalist free : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_DATALIST_NEXT Error in datalist next : [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_EDM_FNS_INIT SysDB Oper - [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_EDM_REG SysDB Oper - [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_REG_VERIFY SysDB operation [chars] failed: [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-ERR_SYSDB_VRFN_FNS_INIT SysDB operation [chars] failed: [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-GEN_ERR [chars] failed : [chars].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-GENINITFAIL Initialization failed: [chars] [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MFWD_MA-3-IDB_ERR [chars] failed for [chars] [[hex]].

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_ALM Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_ALM-7-ERR_GENERAL [chars] : [chars]

Explanation    An internal system error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_IMC_CLIENT Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_IMC_CLIENT-3-ERR_IMC MPLS LIB IM client could not register for debugging ([chars])

Explanation    MPLS LIB IM client library failed to register for debugging.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_IO Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-3-ERR_MEM_ALLOC [chars] failed :[chars]

Explanation    Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-6-ERR_GENERAL [chars]: [chars]

Explanation    Some informational message with cerrno.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_IM [chars] failed: [chars]

Explanation    Some error occurred in operations with IM. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_PAK [chars] failed: [chars]

Explanation    Some error occurred in Packet (IP/MPLS/ICMP) related operations. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_TIMER [chars] failed for '[chars]': [chars]

Explanation    Some error occurred in Managed Timer related operations. The text of the message displays the failed operation and the related timer construct with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_IO-7-ERR_WAVL [chars] failed (tree=[chars]): [chars]

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_LCAC Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_LCAC-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex.
Aborting show request. Please try again. If this problem persists,
please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_LCAC-7-ERR_INTERNAL [chars]

Explanation    An internal system error occured.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

MPLS_LSD Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating

Explanation    MPLS LSD terminated due to lack of memory for a critical operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-3-MULTI_IP_FPI_RW [chars]

Explanation    Rewrite creation or modification failed due to presence of multiple IP route elements.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_GENERAL [chars]

Explanation    Miscellaneous MPLS LSD error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_LSD-7-ERR_INIT Initialization of MPLS LSD failed, op='[chars]' ([chars])

Explanation    MPLS LSD failed to initialize for the reason displayed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_NETIO Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-5-CLEAR_MAPPING_FAILED control clear mapping for [chars] mpls proto [dec] failed [chars]

Explanation    MPLS could not clear control mapping for underlying protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-5-SET_MAPPING_FAILED control set mapping for [chars] to [hex]/[hex] mpls proto [dec] failed [chars]

Explanation    MPLS could not set control mapping for underlying protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MPLS_NETIO-7-ERR_GENERAL [chars] FAILED: [chars]

Explanation    Some miscellaneous error occured. The text of the message explains the err/warning and traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_STATIC Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-4-ERR_MEM_ALLOC Memory allocation failed for [chars]

Explanation    Allocation of memory failed.

Recommended Action    Add more memory.

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-6-ERR_CONN Connection to the [chars] failed ([chars])

Explanation    MPLS static process could not connect with a manager.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MPLS_STATIC-7-ERR_INIT Initialization of MPLS Static failed - [chars] ([chars])

Explanation    Initialization of the MPLS Static process failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_TE Messages

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_MEM_ALLOC Memory allocation failed for [chars]

Explanation    Allocation of memory failed.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_BAG_DECODE [chars]: [chars]: [chars]

Explanation    A Bag related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_DELETE [chars]: [chars]: [chars]

Explanation    A SysDB free related error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-3-ERR_SYSDB_GET [chars]: [chars] failed for path [chars] : [chars]

Explanation    A sysdb error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHOW_WARNING The show thread waited [unsigned int] seconds and could not acquire the mutex. Aborting show request. Please try again. If this problem persists, please contact your technical service representative.

Explanation    The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.

Recommended Action    Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-SHUTDOWN Process is shutting down ([chars]): [chars]

Explanation    TE process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not TE process has automatically been restarted.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then TE process will recover automatically. If a manual restart is required, then 'process start te_control' is required to recover.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-4-WARN [chars]

Explanation    An internal system warning occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-7-ERR_IM [chars]: [chars] failed, some tunnel-te interfaces were not created properly

Explanation    An Ifmgr error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

Error Message     
 
    
    
   

%ROUTING-MPLS_TE-7-ERR_INTERNAL [chars] : [chars]

Explanation    An internal system error occurred.

Recommended Action    Copy the message exactly as it appears and report it to your technical service representative.

MRIB_API Messages

Error Message     
 
    
    
   

%ROUTING-MRIB_API-3-ASYNC_ERR Asynchronous error: [chars]

Explanation    'An unhandled asynchromous error occurred in the MRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB_API-3-CORRPT Corrupted update: [chars]. (expected [dec] bytes, got [dec] bytes)

Explanation    'A corrupted update was received from the MRIB by the MRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB_API-3-GENINITFAIL Initialization failed: [chars] [chars]

Explanation    Error occurred at client initialization.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-MRIB_API-3-RPC_FAIL RPC unexpected error: [chars]

Explanation    'An RPC-related error occurred in an RPC call from the MRIB API'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB_API-7-ASYNC_WAR Warning: [chars]

Explanation    'A recoverable error condition occurred in the MRIB API'

Recommended Action    No action is required.

MRIB Messages

Error Message     
 
    
    
   

%ROUTING-MRIB-2-NOMEMORY No memory for [chars] in [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MRIB-2-NORESOURCE Resource unavailable for [chars] in [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-BCDL_ERR Failed to [chars]: [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-EDM_INIT Error in EDM activity : [chars] - [chars]

Explanation    An error occurred when MRIB tried to initialize conn to Sysdb for show commands.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-GEN_ERR [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-GENCOMMERR Communication error: [chars] [chars]

Explanation    A Inter Process Communication error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-GENINITFAIL Initialization failed: [chars] [chars]

Explanation    An unrecoverable error occurred at system initialization time.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-INTERNALERR Internal error: [chars] in [chars] line [dec] ([chars])

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-LRD_ERR LRD Error: [chars] - [chars]

Explanation    A general error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-LWM_ERR MRIB LWM error: [chars] - [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-MOD_INTF_LIST Interface [chars] has no modified flags. Shouldn't be present in list.

Explanation    An error occurred when MRIB tried to walk the modified interfaces list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-NSFSTATE Error modifying MRIB Non-stop Forwarding state in [chars]: [chars]

Explanation    An internal error occurred when MRIB attempted to transition to/from Non-stop Forwarding mode.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-REDUCEDFUNCT Initialization of [chars] functionality failed

Explanation    The initialization of a functionality failed. This component migh still operate without the functionality.

Recommended Action    This indicate a resource shortage. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MRIB-3-TREE_OPER Failed to [chars] [chars] interface in interface tree of [chars].

Explanation    An error occurred when MRIB tried to perform a tree operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-4-DEBUGERR Debugging error: [chars] in [chars] line [dec] ([chars])

Explanation    An error related to the debugging subsystem occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-4-FILTRVIOLERR Filter violation error: conn [dec] ([chars]:[chars]) in [chars]

Explanation    A client tried to modify a route attribute not owned by it

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-4-INCORRECTPARS Illegal parameter in function call ([chars]) in [chars]

Explanation    An externally accessible function has been called with illegal parameter(s). the parameter(s) has been casted to an acceptable value.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MRIB-4-NOMEMORYW No memory for [chars] in [chars]. Handling: [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition but the problem has ben handled locally.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

MSDP Messages

Error Message     
 
    
    
   

%ROUTING-MSDP-3-ACL_ERR acl error: [chars] [chars] [chars]

Explanation    Check if access list is configured as intended

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-BAD_STATE the peer [chars] has changed to an illegal state: [dec]

Explanation    The state was not one of the valid states

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-CACHE_ERR cache error: [chars] [chars]

Explanation    An error occured updating the SA cache.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-CONNECTION_ERR [chars] error: [chars]

Explanation    A peer has incorrectly attempted to establish a connection with us. Possible causes may include a passive peer trying to make an active connection, in this case the connection will be rejected. Recieving a connection request from a peer that is in the Established state, in this case the current, if the peer is active, the existing connection will be terminated and the new connection will be acted upon. recommended_action: Gather as much relavent information from the respective peer. *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-EDM_ERR error: show server error: [chars] [chars]

Explanation    An error occured with a show client communicating with the msdp. show server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-EVENT_FAILED event [chars] failure: [chars]

Explanation    An unrecoverable error occurred during the event loop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-IARM_REG_ERR Failed to register on interface [chars]: [chars]

Explanation    An error occured when registering to IARM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-IARM_UPDATE_ERR Failed to update: [chars]

Explanation    An error occured when registering to IARM.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-INIT_FAILED Initialization failed: [chars]

Explanation    An unrecoverable error occurred at system initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-INIT_FAILED2 Initialization failed: [chars], [chars]

Explanation    An unrecoverable error occurred at system initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-INTERNAL_STATE_ERR [chars]: [chars] [chars]/[chars]

Explanation    An error occured due to inconsistent internal state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-IO_FAILED I/O failure: [chars] [dec], [chars], [chars]

Explanation    An error has occurred during a socket operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-LPTS_POLICY_ERR Failed to [chars] lpts policy for peer [chars] [[dec]]

Explanation    Some socket/lpts error occured.

Recommended Action    Consult the configuration documentation for appropriate commands.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-LTRACE_INIT ltrace_init failed for '[chars]': [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-MRIB_ERR mrib error: [chars], [chars]

Explanation    An error has occurred during communication with the MRIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-NOTIFY [chars] notification [chars]: code: [dec], subcode [dec]

Explanation    An error was encountered during communication with specified peer.

Recommended Action    Observe error details to determine cause of problem. If that does not help turn on 'debug ip msdp tlv'.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-OUT_OF_MEMORY out of memory: [chars] [chars]

Explanation    Eliminate system processes or add memory

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-OUT_OF_RESOURCE [chars] active SA limit [dec] exceeded SA count

Explanation    Resource limit has been hit

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-SOCKET_ERR socket([dec]) error: [chars] [chars]

Explanation    An unrecoverable error occured during a socket operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-SYSDB_ERR sysdb error: [chars] [chars]

Explanation    An error occured while communicating with sysdb.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-WDSYSMON_EVENT_ERROR Received an invalid event from WDSysmon

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-3-WDSYSMON_REGISTER_ERROR [chars]

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-BAD_MASKLEN invalid mask length, must be 32 ([chars]/[dec]): [chars]

Explanation    A masklen other than 32 was attempted'

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-BGP bgp client: [chars] [chars]

Explanation    Problem communicating with BGP

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-CONFIG_FAILED config failed: [chars] [chars], [chars]

Explanation    'reconfigure'

Recommended Action    Consult the configuration documentation for appropriate commands.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-MRIB_WARN warning mrib: [chars]: [chars]

Explanation    An problem comminicating with the mrib.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-OOM_STATE_THROTTLE Received [chars] memory depletion warning, stop creating new msdp SA state

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-OOM_STATE_UNTHROTTLE Node memory back to normal, new msdp states will be created

Explanation    Internal error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-PEER_ERR peer error: [chars] [chars]

Explanation    Some peer error occured.

Recommended Action    Consult the configuration documentation for appropriate commands.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-RIB_ERR rib error: [chars] [chars]: [chars]

Explanation    An error has occurred during communication with the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-SA_MESSAGE [chars]: error in SA ([chars], [chars]): [chars]

Explanation    Error in the SA message format or contents.

Recommended Action    Turn on 'debug ip msdp tlv' for more information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-4-TIMER timer error has occured

Explanation    A timer error has occur

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-5-INIT_PEER_UP_DOWN [chars] [chars] [chars]

Explanation    MSDP Peer UP/DOWN.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-6-INIT_BASIC [chars]: pid [dec]

Explanation    MSDP Initialized.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-MSDP-6-INIT_INFO retried [chars] [chars] [dec]

Explanation    An unrecoverable error occurred at system initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MULTIVER Messages

Error Message     
 
    
    
   

%ROUTING-MULTIVER-3-ERR_DLL_OPEN Could not load DLL [chars]: [chars]

Explanation    There was a problem loading the DLL - perhaps the router has run out of memory, or there was a problem reading the file.

Recommended Action    Check to make sure that one or more nodes is not having problems with memory.

NTPD Messages

Error Message     
 
    
    
   

%ROUTING-NTPD-5-ALL_CONN_LOST All NTP peer connections failed.

Explanation    The ntp server lost all connections with the clock sources.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-NTPD-5-HP_CONN_LOST High priority NTP peer connection lost.

Explanation    The ntp server lost the connection with the best clock source configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-NTPD-5-HP_CONN_RECOVERED High priority NTP peer connection recovered.

Explanation    The ntp server recovered the connection with the best clock source configured.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-NTPD-5-LP_CONN_RECOVERED At least a low priority NTP peer connection was recovered.

Explanation    The ntp server recovered a connection with one of the configured clock source.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-NTPD-5-UNUSUAL_OFFS detect an unusual offset time value.

Explanation    The offset between the active clock source and the system clock exceeds 1000 msecs.

Recommended Action    No action is required.

ORA_SHARED Messages

Error Message     
 
    
    
   

%ROUTING-ORA_SHARED-4-ERR_DLL_REG Unable to register cerrno dll [chars] because [chars]

Explanation    The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ORA Messages

Error Message     
 
    
    
   

%ROUTING-ORA-2-ERR_MEM_ALLOC Cannot allocate entry

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-ORA-3-DUPLICATE_DOCKENTRY Dock entry add failure

Explanation    I really do not know.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-3-INIT Failure in init function in DLL [chars]

Explanation    The library is incorrectly installed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-3-MISSING_BASE_TYPE The base type '[chars]' v'[chars]' was used as a [chars] in a [chars]: '[chars]' type in area [chars]

Explanation    One of the operations in one of the ORAs used a base type that was not defined in any of the ORA math sets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-3-MISSING_FUNCTION Route access library [chars] has no [chars] function

Explanation    The library is incorrectly installed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-3-MISSING_OPERATOR The operator '[chars]' was not located in any of the '[chars]'s ORAs.

Explanation    There is a function declared within the various docked ORAs at this attach point that uses an operator that does not exist with the same set of docked ORAs. Please contact support.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-3-THREADING Threading operation '[chars]' for '[chars]' failed because: [chars]

Explanation    The presented threading operation failed. It is likely that policy multi-version calls will stop working and thus policy may not be operational.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-4-ERR_DLL_REG Unable to register cerrno dll [chars] because [chars]

Explanation    The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-4-MERGE_FAILED Some base type(s) was(were) unavailable during AP merging at: [chars]

Explanation    One or more base types where not available when bringing together the parts of this attach point. This is an item that should be caught during testing. If it does show up, support should be contacted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-4-MISSING_DOCK_INFO The dock data for docking item [chars] was missing

Explanation    This is most likely an internal logic error that resulted in a given ora dockling being released more than once.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-7-DBGINIT Unable to bring up debug event structures: [chars]

Explanation    The debug event initialization failed. The ora docker will still run correctly, but debug commands may be unavailable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-ORA-7-DBGSHUTDOWN Unable to shutdown debug event structures: [chars]

Explanation    The debug event shutdown failed. The ora docker will still run correctly, but debug commands may be unavailable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPF_EDM Messages

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-DATALIST_SET_MORE_FLAG Failed to set external data manager more flag for datalist [chars]

Explanation    A client has requested information through SysDB from OSPF. During execution of the request an attempt to set a flag indicating there is more data for the client failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-ENCODE_FAILED Failed to encode [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-LIST_ADD_FAILED Failed to add to an external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-LIST_CREATE_FAILED Failed to create external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_EDM-3-SYSDB_BIND_FAILED Failed to connect to SysDB ([chars])

Explanation    The process failed to connect to SysDB while starting.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPF_POLICY Messages

Error Message     
 
    
    
   

%ROUTING-OSPF_POLICY-3-ORA_INSTBUILD Failed to build [chars], reason [chars] cer [chars]

Explanation    Internal error in policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_POLICY-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPF_RIB Messages

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-3-ERR_PATH_ADD Error adding path to batching buffer

Explanation    An error was encountered in the call to ipv4_rib_batch_add_path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-3-ERR_PATH_DELETE Error deleting path from batching buffer

Explanation    An error was encountered in the call to ipv4_rib_batch_delete_path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-3-ERR_PROTO_MODIFY Error changing purgetime

Explanation    An error was encountered in the call to ipv4_rib_protocol_modify.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-3-ERR_ROUTE_HDR Error adding route header to batching buffer for [chars]/[dec]

Explanation    An error was encountered in the call to ipv4_rib_batch_add_route.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-3-ERR_UPDATE_DONE Error informing rib that batch is complete

Explanation    An error was encountered in the call to ipv4_rib_batch_complete.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-4-BATCH_LOG_PATH RIB batch error, [chars] (result [dec]), prefix [hex]/[dec] next_hop [hex] intf [chars].
Retrying

Explanation    The specified error was encountered in the OSPF RIB batching code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-5-BATCH_ERROR RIB batch error, [chars]

Explanation    The specified error was encountered in the OSPF RIB batching code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-5-BATCH_ERROR_CODE RIB batch error, [chars] ([hex])

Explanation    The specified error was encountered in the OSPF RIB batching code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_RIB-6-INFO_RT_HDR_NOTUSED Believes [chars]/[dec] and [chars]/[dec] differ

Explanation    The RIB batching API believes that it already has this router header in the batching buffer.

Recommended Action    No action is required.

OSPF_UV Messages

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-CERR_REG_FAIL Failed to register internal error codes: [chars]

Explanation    An error occurred during the registration of OSPF error codes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_DBG_REGISTER_FAILED Error initializing ospf_uv debugging: [chars]

Explanation    An error occurred during initialization of the ospf_uv process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_MEM_ALLOC_FAIL Unable to allocate [unsigned int] bytes for '[chars]'

Explanation    The ospf_uv process was unable to allocate memory for the specified resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_PROC_READY Error signaling process ready: [chars]

Explanation    The ospf_uv process was unable to signal process ready to sysmgr.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_SYSDB_CONNECT Error binding to SysDB: [chars]

Explanation    The ospf_uv process was unable to bind to SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_SYSDB_DISCONNECT Error unbinding from SysDB: [chars]

Explanation    The ospf_uv process was unable to unbind from SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_SYSDB_REG_VERIFY Error registering with SysDB: [chars]

Explanation    The ospf_uv process was unable to register with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-ERR_VRFN_FNS_INIT Error setting SysDB callback functions: [chars]

Explanation    The ospf_uv process was unable to initialize SysDB callbacks.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-EVENT_ERR Error in event loop: [chars]

Explanation    An error occurred in the main ospf_uv event loop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-EVM_CRE_FAIL Error creating event connection manager: [chars]

Explanation    The ospf_uv process was unable to create an event connection manager instance.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-3-INTF_FWS_INIT Error initializing forward-reference store: [chars]

Explanation    The ospf_uv process was unable to initialize the forward-reference store library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF_UV-6-PROCESS_NAME Caution: The OSPF process name [chars] conflicts with a show or clear command name

Explanation    The name chosen for the OSPF process matches an ospf show or clear command, or a command abbreviation. This can cause ambiguities with subsequent show or clear commands for this process.

Recommended Action    Choose a different name for the OSPF process.

OSPF Messages

Error Message     
 
    
    
   

%ROUTING-OSPF-2-ERR_MEM_ALLOC No memory, [chars], process terminated

Explanation    Memory allocation of a critical OSPF resource failed because of a low memory condition. The OSPF process was terminated.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-ALLOC_ERR Allocation error, [unsigned int] bytes for [chars]

Explanation    Allocation of the specified resource failed because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-AREANULL [chars]: area pointer is NULL

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-BADMSG ospf router received bad message type [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-BADSHARE Bad refcount at [hex] (refcount=[hex]) in [chars]

Explanation    An internal software error occurred. Resources may be in inconsistent state.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-BADTIMER Managed Timer error, [chars]: Unrecognized timer type [dec]

Explanation    A timer was found with an unrecognized type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-DBGINIT Debug init error, [chars]: event [chars], error [dec]

Explanation    Unable to initialize a debugging flag

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-DUP_RTRID OSPF detected duplicate router-id [chars] from [chars] on interface [chars]

Explanation    OSPF received hello packet from a neighbor which has the same router-id as this routing process. A full adjacency cannot be established.

Recommended Action    OSPF router-id should be unique. Change the neighbors router-id.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-ERR_RESOURCE_ALLOC No memory could be allocated for the resource, [chars]

Explanation    Allocation of the specified resource failed because of a low memory condition. This could affect the protocol functionality.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands and preferably restart the OSPF process.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-EVM External Event Manager error, [chars], error [chars] [[hex]]

Explanation    A call to an external event manager function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-EVM_CODE External Event Manager error, [chars]: [chars] code [dec], error [chars] [[hex]]

Explanation    A call to an external event manager function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-EXTERNALERR External error, [chars]

Explanation    An external software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-EXTERNALERR_RC External error, [chars], error [hex]

Explanation    An external software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-FRIS FRIS error, [chars], [chars] error [chars] [[hex]]

Explanation    The FRIS request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IDBERR IDB error, [chars]: [chars], intf [chars] cerr [chars]

Explanation    Error encountered while attempting to activate an idb. Problem could be corrupt data from IM or IP/ARM or the FRIS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IFCHECK Interface [chars] is attached to more than one area

Explanation    An internal consistency check has failed. An interface appears to be associated with more than one area.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IFINIT Interface init error, interface [chars]

Explanation    OSPF failed to initialize data structures for an interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IFMGR External IFMGR error, [chars], intf [chars] error [chars] [[hex]]

Explanation    The specified interface manager request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IGPTE IGP/TE error, [chars]: [chars] error [dec]

Explanation    Error encountered while attempting to use the IGP_TE Lib.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-INIT_ERR Init error, [chars], error [hex]

Explanation    An error occurred during initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-INTERNALERR Internal error, [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-INTERNALERR_RC Internal error, [chars], error [hex]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-IPARM External IP-ARM error, [chars], error [chars] [[hex]]

Explanation    A call to an external IP-ARM function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-LWM External light-weight msg error, [chars], error [chars] [[hex]]

Explanation    A call to an external light-weight messaging function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-MCAST Multicast error, [chars] [chars] on [chars], error [chars]

Explanation    The above specified multicast operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-MEDIAERR Media error, [chars]: Interface [chars] unknown type: [chars]

Explanation    Media table lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-MUTEX Mutex error, [chars], [chars] mutex, error [chars] [[hex]]

Explanation    An error occurred in the pthread functions used for thread synchronization. This is most likely a system error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-NOBACKBONE Flagged as being an ABR without a backbone area

Explanation    The router was flagged as an Area Border Router (ABR) without backbone area in the router.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-NOIPADDR No IP Addr on interface [chars]. OSPF will not be run over it.

Explanation    This message is displayed if ospf is configured on an unnumbered interface that is not of type point to point. In this case, ospf will not run on this interface.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-NOSELF if [chars] if_state [dec]

Explanation    An internal error occurred. An interface was not fully initialized when an OSPF related event occurred.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-NOTNBRTYPE Cannot configure neighbor on [chars]. Interface must be NBMA or P2MP

Explanation    Neighbor cannot be configured on interface if it is not type NBMA or point to multipoint.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-PKTDROP Raw socket error, [chars]: packet dropped, [chars]

Explanation    An input packet was dropped for the specified reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-RDB_NO_LSA lsid [chars] adv [chars] type [dec] gateway [chars] metric [dec] network [chars] mask [chars] attr [hex] net-metric [dec]

Explanation    OSPF found inconsistency between its database and topology table.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-RECONF_VL OSPF process [chars] is changing router-id. Reconfigure virtual link neighbors with our new router-id

Explanation    OSPF process is being reset, and it is going to select a new router-id. This will bring down all virtual links. To make them work again, virtual link configuration needs to be changed on all virtual link neighbors.

Recommended Action    Change virtual link configuration on all the virtual link neighbors, to reflect our new router-id.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-RIB External RIB error, [chars], error [chars] [hex]

Explanation    A call to an external RIB function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-RIB_MSG External RIB error, [chars]

Explanation    A call to an external RIB function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-RPC External RPC error, [chars], error [chars] [[hex]]

Explanation    An RPC error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-SOCKET External socket error, [chars], error [chars] [[hex]]

Explanation    The above specified socket operation failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-SYSDB External SysDB error, [chars], error [chars] [[hex]]

Explanation    An external OSPF error occurred when accessing the system database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-THREAD_CREATE Thread create error, [chars], error [chars] [[hex]]

Explanation    OSPF failed to create a thread essential to its operation. This is an internal error. An automatic restart of the OSPF process was necessary to attempt recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-3-UNKNOWNSTATE Reached unknown state in neighbor state machine

Explanation    An internal software error occurred. When processing and DBD packet, the neighbor was found to be in an indeterminate state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-BADLENGTH Invalid length [dec] in OSPF packet from [chars] (ID [chars]), [chars]

Explanation    The system received an OSPF packet with a length field of less than normal header size or inconsistent with the size of the IP packet in which it arrived. This indicates an error in the sender of the packet.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-BADLSATYPE Invalid lsa: [chars] Type [dec], LSID [chars] from [chars], [chars], [chars]

Explanation    The router received an LSA with invalid LSA Type. The cause is either memory corruption or unexpected behavior on a router.

Recommended Action    Check both the sending and receiving routers for memory corruption. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-CONFLICTING_LSAID Found LSA with the same host bits but different mask.
LSA with shorter mask will be used.
LSA 1: [chars]/[dec]
LSA 2: [chars]/[dec]

Explanation    An LSA could not be generated because there is a supernet lsa with the host bit set LSA ID that conflicts with the major net LSA ID that also needs to have host bit set.

Recommended Action    This is a limitation in OSPF's ability to handle conflicting LSA IDs. Attempt to avoid this limitation by modifying the generation of summary LSA's so that the LSA ID's do not conflict. Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-DEPRECATED_RTRID
outer-id [chars] command has been deprecated. Please delete
outer-id [chars] and reconfigure router-id.

Explanation    OSPF router-id has been deprecated.

Recommended Action    Use router-id .

Error Message     
 
    
    
   

%ROUTING-OSPF-4-DOMAIN_TAG_NEEDED Domain-tag must be configured with 4-byte AS number in vrf [chars]

Explanation    At the time of the redistribution of BGP with 4 byte AS number, domain-tag wasn't confiured. User needs to be aware that in this case domain-tag must be configured.

Recommended Action    If not already configured domain-tag should be configured for the vrf.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-ERR_MSG_GET_SCOID Error retrieving client's connection ID to the [chars] channel: [chars] ([dec])

Explanation    OSPF failed to retrieve its local connection ID for a client attached to the specified channel. This is an internal programming error.

Recommended Action    Restart the OSPF process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-ERR_MSG_REPLY Error replying to the client [chars]: [chars] ([dec])

Explanation    OSPF failed to reply to its client through message channel. This could be a result of channel down or resource allocation failure.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the OSPF process. *RECUR*

Error Message     
 
    
    
   

%ROUTING-OSPF-4-ERRRCV Received invalid packet: [chars] from [chars], [chars]

Explanation    An invalid OSPF packet was received. Details are included in the error message. The cause might be a misconfigured OSPF or an internal error in the sender.

Recommended Action    Check the OSPF configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-IFINDEX_GET Unable to get interface index for [chars]: [chars]

Explanation    An error occurred when trying to get a numeric interface index value for the specified interface. Ietf nsf restart might fail.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-KEYCFG Key [unsigned long int] [chars]

Explanation    An error occurred when trying to configure an ospf authentication key.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-MAX_INTF_APPLY Interface limit [dec] exceeded. Dropping interface [chars]

Explanation    The number of interfaces configured exceeds the interface limit.

Recommended Action    Either raise the maximum interface limit or unconfigure interfaces until the number is below the limit.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-MUTEX_ERR [chars] [chars] mutex ([hex]), tid [dec] owner [hex] count [dec], error [chars] [[hex]]

Explanation    An error has been returned by the functions used for locking/unlocking an OSPF synchronization mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-NBREXIST Neighbors were configured when NBMA or P2MP. Changing network type will abandon that configuration. Please remove configured neighbors.

Explanation    Neighbors had been configured earlier when the network type was nonbroadcast. The current configuration request will cause these configured neighbors to be abandoned.

Recommended Action    Remove the configured neighbors.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-NONEIGHBOR Received [chars] from unknown neighbor [chars]

Explanation    OSPF hello, database description, or database request packet was received, but the router could not identify the sender. This is a normal occurrance if a link flap occurs on the router receiving the packet.

Recommended Action    This situation should correct itself. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-NORTRID OSPF process [chars] cannot start without a router id. Configure router-id with the
outer-id command.

Explanation    OSPF failed while attempting to allocate a router ID from the IP address of one of its interfaces as no suitable IP address was available.

Recommended Action    Make sure that there is at least one interface that is up and has a valid IP address. If there are multiple OSPF processes running on the router, each requires a unique router ID. You must have enough 'up' interfaces so that each of them can obtain a router ID. It is highly recommended that you configure loopback interfaces or use the router-id configuration command to better control the selection of OSPF router IDs.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-NOTREDIST5 db_free: external LSA [chars]/[dec]

Explanation    An internal software error occurred. OSPF is deleting an external LSA that should not be deleted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-OLD_CMD Command [chars] has been upgraded by [chars]. Use the new command.

Explanation    The command has been replaced by a newer command.

Recommended Action    Use the new command inidicated in the message.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-PAKMAN_EVENT Pakman event [chars] received, code=[dec], [chars]

Explanation    An error has occured and pak manager sent use an event. If we can't recover from the error (ABORT event), OSPF will exit.

Recommended Action    This is an indication that error(s) has occured in pakman No specific actions are required for OSPF.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-POLICYCONFIG An error was encountered configuring policy, [chars]: [chars]

Explanation    A problem was encountered while setting up route policy configuration. Some of the routing policy may not have been configured correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-RAW_OUTPUT_ERR Raw socket output err: [chars], src=[chars], dest=[chars], if=[chars], msglen=[dec]

Explanation    An error has occured when OSPF is in process of sending a packet to the the raw socket.

Recommended Action    This is an indication that error(s) has occured in other components and it is impacting OSPF's ability send data. No specific actions are required for OSPF.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-REDIST_FAILED OSPF was unable to configure redistribution for protocol [chars]

Explanation    An error occurred while OSPF was setting up redistribution for the named protocol. The redistribution will not take place.

Recommended Action    This may be due to lack of memory, or due to a RIB failure, or to an internal OSPF problem. It may help to restart the OSPF process.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-REDIST_MAX_PFX Redistribution prefix limit has been reached - [dec] prefixes

Explanation    We have reached the maximum number of redistributed prefixes

Recommended Action    Check if redistribution of large number of prefixes is desired and has not been wrongly configured.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-REDIST_THR_PFX Redistribution prefix threshold has been reached - [dec] prefixes

Explanation    We have reached the threshold level of number of redistributed prefixes.

Recommended Action    Check if redistribution of large number of prefixes is desired and has not been wrongly configured.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-STUB_ASBR Router is currently an ASBR while having only one area which is a stub area

Explanation    Router is configured as an ASBR but is only connected to a single stub area. This can waste resources since the router has nowhere to send the external LSAs that it is generating.

Recommended Action    Check configuration and disable redistribution of routes into ospf if appropriate.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-USING_OLD_RTRID OSPF process [chars] encountered an error while finding a new router ID. The old router ID [chars] is being used as an interim value. clear ip ospf process will force another attempt to find a valid router ID.

Explanation    OSPF failed while attempting to allocate a router ID from the IP address of one of its interfaces due to an unexpected internal problem.

Recommended Action    Use 'clear ip ospf process' to force another attempt to find a valid router ID. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-4-VIRTUAL_IN_NON_BACKBONE Virtual link information found in non-backbone area: [chars]

Explanation    An internal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-5-ADJCHG Process [chars], Nbr [chars] on [chars] in area [chars] from [chars] to [chars], [chars]

Explanation    An OSPF neighbor has changed state. The message describes the change and the reason for it. This message appears only if the log-adjacency-changes command is configured for the OSPF process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-BADCHKSUM Checksum Failure in database in area [chars] Link State Id [chars] Old Checksum [hex] New Checksum [hex]

Explanation    OSPF has detected a checksum error in the database due to memory corruption.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-DBEXIST area [chars] lsid [chars] mask [chars] adv [chars] type [dec]

Explanation    OSPF has a problem locating the LSA, which could lead to a memory leak.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-GRACEFUL_SHUTDOWN [chars]

Explanation    Informs user of graceful shutdown events. User needs to be aware of these activities.

Recommended Action    No action required.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-MAXMETRIC_RUNNING Current max-metric on-startup timer is running. New timer will be used at next reload.

Explanation    maximum-metric LSA origination setting was changed while the maximum-metric origination was still active. The change will not take effect until the next time the system is restarted.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-MEM_NOTIF [chars] [chars].

Explanation    An unexpected event from the system monitor was seen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-MGDTIMER External Managed Timer error, [chars], error [chars] [[hex]]

Explanation    An external managed timer support routine failed. The affect this error has on the proper operation of OSPF depends on where and when this error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-NEWLIMIT [chars] limit changed. Old: [dec] New: [dec]

Explanation    User has changed the configuable resource limit.

Recommended Action    No action required. This is an informational message.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-NOTREDIST3 build_ex_route(): don't redistribute net [chars]/[dec], [chars] advertises it already

Explanation    For information only. Another router with a greater router ID is advertising the same external LSA. This router will stop originating the LSA to eliminate the redundancy.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-REFBW_CHG Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers.

Explanation    Informational message reminding the user that reference bandwidth should be consistent across all routers in the area.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-6-USING_MSGDGST Message-digest is used when both it and cleartext password are configured

Explanation    Inform user that when both a clear text password and message-digest key are configured the message-digest key will be used.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-DB_EX_DQUEUE [chars]: Unexpected external ReadyQ count of 0, &db=[hex], &rtr=[hex]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-DB_READY_Q InReadyQ flag set for external DB, db [chars] on rtr_rt [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-DLINK dld [chars] is NULL

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-DQUEUE Double link queue count is 0 before decrement, &queue=[hex]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-ERR_TUNNEL_INT TE IDB error, [chars], [chars] error [chars] [[hex]]

Explanation    Error in creating a tunnel interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-INIT_FAIL Initialization failure, [chars], process terminated

Explanation    An error occurred during initialization, causing the process to terminate.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%ROUTING-OSPF-7-VRF_DELETE VRF delete error [chars] [chars] [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPFv3_EDM Messages

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-EDMINIT Error initializing EDM thread: [chars]: [chars]

Explanation    An error occurred during initialization of the EDM thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-ENCODE_FAILED Failed to encode [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-EVENT_REGISTRATION_FAILED Failed to connect to the event manager: [chars]

Explanation    The process failed while attempting to connect to an event manager channel for the indicated subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-LIST_ADD_FAILED Failed to add to an external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-LIST_CREATE_FAILED Failed to create external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-NO_DATA Data for [chars] is not available

Explanation    The data needed for the specified OSPF show command was not available. This would occur for non-critical data such as trace or debug information.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-PROTO_REG_FAILED Failed to register show protocol information : [hex], '[chars]'

Explanation    OSPFv3 was unable to register for support of the show protocol command.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-REGISTER_FAILED Failed to register its [chars] external data manager, '[chars]'

Explanation    The process failed when attempting to register its external data manager with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-SYSDB_BIND_FAILED Failed to connect to SysDB ([chars])

Explanation    The process failed to connect to SysDB while starting the indicated subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-3-SYSDB_COID_FAILED Failed to convert during a conn to coid conversion

Explanation    The process failed to convert a conn to a coid while starting the indicated subsystem. This generally can only occur when starting up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_EDM-6-BAGREG_FAILED Failed to register its external data manager data blocks

Explanation    The process failed while attempting to register its external data manager data blocks with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPFV3_POLICY Messages

Error Message     
 
    
    
   

%ROUTING-OSPFV3_POLICY-3-ORA_INSTBUILD Failed to build [chars], reason [chars] cer [chars]

Explanation    Internal error in policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFV3_POLICY-3-ORA_RUN Could not apply policy operation [chars] to attribute [chars] because [chars]

Explanation    Internal error in policy library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPFv3_RIB Messages

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-2-NO_MEMORY Unable to allocate space for rib batching buffer: No Memory

Explanation    Insufficent memory to allocate buffer for RIB batching API'

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-BIND Unable to bind to the RIB

Explanation    An error occurred on a request to bind to the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-DEFAULT_REG Unable to register with the RIB to receive the default route: [chars]

Explanation    An error occurred on a request to have the RIB send us route updates for the default route.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-DISCONNECT Error while disconnecting RIB Event connection

Explanation    An error occurred during an attempt to tear down the RIB Event connnection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-ERR_BATCH_COMPLETE Error informing rib that batch is complete

Explanation    An error was encountered in the call to ipv6_rib_batch_buffer_complete.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-ERR_PATH_ADD Error adding path-add to batching buffer (#[hex])

Explanation    An error was encountered in the call to ipv6_rib_batch_add_path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-ERR_PATH_DELETE Error adding path-delete to batching buffer ([hex])

Explanation    An error was encountered in the call to ipv6_rib_batch_delete_path.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-ERR_ROUTE_HDR Error adding route header to batching buffer for [chars]/[dec] ([hex])

Explanation    An error was encountered in the call to ipv6_rib_batch_add_route.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-ERR_UPDATE_COMPLETE Error informing rib that update is complete: [chars]

Explanation    An error was encountered in the call to ipv6_rib_update_complete.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-FINDPDB Unable to get a RIB handle for [chars] routes: [chars]

Explanation    An error occurred on a request to find the handle for the specified type of routes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-PURGE Error removing OSPFv3 routes from the IPv6 RIB: [chars]

Explanation    An error was encountered in the call to ipv6_rib_purge_protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-REDIST_REG Unable to register with the RIB to receive updates for [chars] routes: [chars]

Explanation    An error occurred on a request to have the RIB send us route updates for the specified type of routes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_RIB-3-REGISTER Unable to register OSPFv3 with the RIB: [chars]

Explanation    An error occurred on a request to register the OSPFv3 protocol with the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSPFv3_UV Messages

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-CERR_REG_FAIL Failed to register internal error codes: [chars]

Explanation    An error occurred during the registration of OSPFv3 error codes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_DBG_REGISTER_FAILED Error initializing ospfv3_uv debugging: [chars]

Explanation    An error occurred during initialization of the ospfv3_uv process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_MEM_ALLOC_FAIL Unable to allocate [unsigned int] bytes for '[chars]'

Explanation    The ospfv3_uv process was unable to allocate memory for the specified resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_PROC_READY Error signaling process ready: [chars]

Explanation    The ospfv3_uv process was unable to signal process ready to sysmgr.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_SYSDB_CONNECT Error binding to SysDB: [chars]

Explanation    The ospfv3_uv process was unable to bind to SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_SYSDB_DISCONNECT Error unbinding from SysDB: [chars]

Explanation    The ospfv3_uv process was unable to unbind from SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_SYSDB_REG_VERIFY Error registering with SysDB: [chars]

Explanation    The ospfv3_uv process was unable to register with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-ERR_VRFN_FNS_INIT Error setting SysDB callback functions: [chars]

Explanation    The ospfv3_uv process was unable to initialize SysDB callbacks.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-EVENT_ERR Error in event loop: [chars]

Explanation    An error occurred in the main ospfv3_uv event loop.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-EVM_CRE_FAIL Error creating event connection manager: [chars]

Explanation    The ospfv3_uv process was unable to create an event connection manager instance.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-3-INTF_FWS_INIT Error initializing forward-reference store: [chars]

Explanation    The ospfv3_uv process was unable to initialize the forward-reference store library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3_UV-6-PROCESS_NAME Caution: The OSPFv3 process name [chars] conflicts with a show or clear command name

Explanation    The name chosen for the OSPFv3 process matches an ospf show or clear command, or a command abbreviation. This can cause ambiguities with subsequent show or clear commands for this process.

Recommended Action    Choose a different name for the OSPFv3 process.

OSPFv3 Messages

Error Message     
 
    
    
   

%ROUTING-OSPFv3-2-NOMEMORY No memory for [chars]

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-ACL_GET Unable to get prefix-list [chars]: [chars]

Explanation    An error occurred when trying to get the named prefix-list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-ACL_REG Unable to register prefix-list [chars]: [chars]

Explanation    An error occurred when trying to register for changes to the named prefix-list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-ALLOCFAIL [chars] allocation failed: [chars]

Explanation    Allocation of the specified resource failed, probably due to low memory.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-APIERR Call to [chars] from [chars] returns: [chars]

Explanation    A lower-level support function returned an unexpected status.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-BADMSG Router thread received an invalid message type: [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-BADTIMER Unrecognized [chars] timer type [dec]

Explanation    A timer was found with an unrecognized type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-CERR_REGISTER Failed to register internal error codes: [chars]

Explanation    An error occurred during the registration of OSPFv3 error codes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-CONN_FAIL Unable to connect to server [chars] : [chars]

Explanation    OSPFv3 was unable to open a connection to a server. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DBGINIT Debug event initialization failed: [chars]

Explanation    Unable to initialize a debugging flag.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DBGREG Debug registration failed: [chars]

Explanation    Unable to initialize debugging flags. Debug commands will not function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DELVLINK Cannot delete virtual link, backbone is being deleted

Explanation    The virtual link cannot be removed because OSPFv3 is in the process of deleting the backbone area. Try again later.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DLINK dld [chars] is NULL

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DUP_RTRID Detected duplicate router ID [chars] from [chars] on interface [chars]

Explanation    OSPFv3 received hello packet from a neighbor which has the same router ID as this routing process. A full adjacency cannot be established.

Recommended Action    OSPFv3 router ID must be unique. Change the router ID.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DUP_RTRID_AREA Detected router with duplicate router ID [chars] in area [chars]

Explanation    OSPFv3 has received multiple router LSAs with our router ID.

Recommended Action    OSPFv3 router ID must be unique. Change the router ID.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-DUP_RTRID_AS Detected router with duplicate router ID [chars] in inter-area router LSA advertised by [chars]

Explanation    OSPFv3 has received an inter-area router LSA with our router ID.

Recommended Action    OSPFv3 router ID must be unique. Change the router ID.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-EVENTBLOCK Event blocking error in [chars] thread: [chars]

Explanation    An error occurred while a thread was blocked waiting for an event

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-EVM_FD Error obtaining the [chars] file descriptor: [chars]

Explanation    A call to get the file descriptor associated with an event manager connection failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-EVM_RETRY Unable to set event manager retry values for the [chars] connection: [chars]

Explanation    A call to the external event manager to set connection retry values failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-FRIS_INSERT Unable to insert interface [chars] in the forward reference list: [chars]

Explanation    An error occurred when adding the interface to the forward-reference list.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-HELLOINIT Error initializing hello thread: [chars]: [chars]

Explanation    An error occurred during initialization of the hello thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IFINDEX_GET Unable to get interface index for [chars]: [chars]

Explanation    An error occurred when trying to get a numeric interface index value for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IFINIT Initialization failure for interface [chars]

Explanation    OSPFv3 failed to initialize data structures for an interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IFMGR [chars] failed: [chars]

Explanation    The specified interface manager request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IFMGR_IF [chars] failed for interface [chars]: [chars]

Explanation    The specified interface manager request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-INIT Initialization failed [[chars]], process terminated

Explanation    An error occurred during initialization, causing the OSPFv3 process to terminate.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-INSTALL_REG Unable to register for package installation notifications: [chars]

Explanation    An error occurred when trying to register with the packaging subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-INSTALL_UNREG Unable to unregister for package installation notifications: [chars]

Explanation    An error occurred when trying to unregister with the packaging subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-INTERNALERR Internal error: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPARM [chars] failed: [chars]

Explanation    The specified IP/ARM request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPARM_IF [chars] failed for interface [chars]: [chars]

Explanation    The specified IP/ARM request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPSEC_CLOSE Error terminating IPSec processing for interface [chars]: [chars]

Explanation    An error occurred when trying to close an IPSec SA for the named interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPSEC_DEBUG_INIT Unable to initialize ipsec debugging: [chars]

Explanation    An error occurred when trying to initialize the ipsec debug commands.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPSEC_INIT Error initializing IPSec support: [chars]%s

Explanation    An error occurred when trying to initialize the OSPFv3 IPSec subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-IPSEC_OPEN Error initiating IPSec processing for interface [chars]: [chars]

Explanation    An error occurred when trying to open an IPSec SA for the named interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-LAS [chars] failed: [chars]

Explanation    The specified Local Address Service request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-LAS_ADDR Interface [chars] does not have a link-local address assigned

Explanation    The specified interface has not received a link-local address from the Local Address Service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-LAS_IF [chars] failed for interface [chars]: [chars]

Explanation    The specified Local Address Service request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-MCAST Multicast [chars] on [chars] failed: [chars]

Explanation    The specified multicast operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-MEM_ALLOC_FAIL Unable to allocate [unsigned int] bytes for '[chars]'

Explanation    OSPFv3 was unable to allocate memory for the specified resource.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-MUTEX_INIT Error [chars] for [chars] mutex: [dec]

Explanation    A error occurred in the initialization of the primitives used for thread synchronization. This is most likely a system error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-NO_VL_ENDPOINT Unable to add host route for virtual link endpoint in area [chars]

Explanation    No IPv6 address was available to use as an endpoint for a virtual link.

Recommended Action    Configure a loopback interface with an IPv6 address and add it to the specified area.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-NOBACKBONE Flagged as being an ABR without a backbone area

Explanation    The router was flagged as an Area Border Router (ABR) without backbone area in the router.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-NOSELF Interface [chars] if_state [dec]

Explanation    An internal error occurred. An interface was not fully initialized when an OSPFv3 related event occurred.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-NOTNBRTYPE Cannot configure neighbor on [chars]: interface must be NBMA or P2MP

Explanation    Neighbor cannot be configured on interface if it is not type NBMA or point to multipoint.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-PKTDROP Packet dropped: [chars]

Explanation    An input packet was dropped for the specified reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-PKTDROP_STR Packet dropped: [chars]: [chars]

Explanation    An input packet was dropped for the specified reason.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-PROCINIT Error initializing OSPFv3 process: [chars]: [chars]

Explanation    An error occurred during OSPFv3 process initialization.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-RIB [chars] [chars]/[dec]: [chars]

Explanation    An error occurred on a request to the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-RIB_ERR_PROTO_MODIFY Failed to modify purgetime with V6 RIB. Old [dec] New [dec]: [dec]

Explanation    An error occurred on a request to the RIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-RTRINIT Error initializing router thread: [chars]: [chars]

Explanation    An error occurred during initialization of the router thread.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-SOCKET Socket operation [chars] failed: [chars]

Explanation    The specified socket operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-SYSDB SysDB error: [chars]([chars]): [chars]

Explanation    An error occurred when accessing the system database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-SYSMGR [chars] failed: [chars]

Explanation    An specified system manager request failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-THREAD_CREATE Error starting [chars] thread: [dec]

Explanation    OSPFv3 failed to create a thread essential to its operation. This is an internal error. An automatic restart of the OSPFv3 process was necessary to attempt recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-UCAST Unicast [chars] on [chars] failed: [chars]

Explanation    The specified unicast filter operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-UNKNOWNSTATE Reached unknown state in neighbor state machine

Explanation    An internal software error occurred. When processing and DBD packet, the neighbor was found to be in an indeterminate state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-3-UNSUPPORTED_IFTYPE Unsupported interface type [chars]: [chars]

Explanation    The interface type is not yet supported by OSPFv3.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-BADAREA Received invalid packet: Incorrect area number ([chars]) from [chars], [chars]

Explanation    The system received an OSPFv3 packet with an area ID that does not match the area that the interface belongs to.

Recommended Action    Check the OSPFv3 configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-BADLENGTH Received invalid packet: Incorrect length ([dec]) from [chars], [chars]

Explanation    The system received an OSPFv3 packet with a length field of less than normal header size or inconsistent with the size of the IPv6 packet in which it arrived. This indicates an error in the sender of the packet.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-BADLSA Invalid LSA: [chars], Type [hex] LSID [unsigned int] from [chars], [chars], [chars]

Explanation    The router received an invalid LSA. The cause is either memory corruption or unexpected behavior on a router.

Recommended Action    Check both the sending and receiving routers for memory corruption. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-BADVERS Received invalid packet: Incorrect OSPF version ([dec]) from [chars], [chars]

Explanation    The system received an OSPFv3 packet with an OSPF version field other than 3. This indicates an error in the sender of the packet.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-DEPRECATED_RTRID
outer-id [chars] command has been deprecated. Please delete
outer-id [chars] and reconfigure router-id.

Explanation    OSPFv3 router-id has been deprecated.

Recommended Action    Use router-id .

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-ERRRCV Received invalid packet: [chars] from [chars], [chars]

Explanation    An invalid OSPFv3 packet was received. Details are included in the error message. The cause might be a misconfigured OSPFv3 or an internal error in the sender.

Recommended Action    Check the OSPFv3 configuration of the receiver and the sender for inconsistency. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-LSDB_ERROR Database error: [chars], Type [hex] LSID [unsigned int] from [chars]

Explanation    OSPFv3 detected an error with its link state database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-LTRACE_INIT Unable to initialize the ltrace buffer [chars]: [chars]

Explanation    An error occurred when trying to create a buffer for tracing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-NONEIGHBOR Received [chars] from unknown neighbor [chars] on [chars]

Explanation    OSPFv3 hello, database description, or database request packet was received, but the router could not identify the sender. This is a normal occurrance if a link flap occurs on the router receiving the packet.

Recommended Action    This situation should correct itself. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-NORTRID OSPFv3 process [chars] could not pick a router-id, please configure manually

Explanation    OSPFv3 failed while attempting to allocate a router ID.

Recommended Action    Use the 'router-id' command to specify a unique Router ID for this OSPFv3 process.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-PKTDROP_WARN Packet dropped: [chars]

Explanation    An input packet was dropped for the specified reason.

Recommended Action    Such errors are possible during raw_ip restarts. If seen otherwise, these errors should be reported to SUPPORT.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-POLICYCONFIG An error was encountered configuring policy, [chars]: [chars]

Explanation    A problem was encountered while setting up route policy configuration. Some of the routing policy may not have been configured correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-REDIST_MAX_PFX Redistribution prefix limit has been reached - [dec] prefixes

Explanation    We have reached the maximum number of redistributed prefixes

Recommended Action    Check if redistribution of large number of prefixes is desired and has not been wrongly configured.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-REDIST_THR_PFX Redistribution prefix warning threshold has been reached - [dec] prefixes

Explanation    We have reached the warning threshold number of redistributed prefixes.

Recommended Action    Check if redistribution of large number of prefixes is desired and has not been wrongly configured

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-SOCKET_WARN Socket operation [chars] failed: [chars]

Explanation    The specified socket operation failed.

Recommended Action    Such errors are possible during raw_ip restarts. If seen otherwise, these errors should be reported to SUPPORT.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-STUB_ASBR Router is currently an ASBR while having only one area which is a stub area

Explanation    Router is configured as an ASBR but is only connected to a single stub area. This can waste resources since the router has nowhere to send the external LSAs that it is generating.

Recommended Action    Check configuration and disable redistribution of routes into OSPFv3 if appropriate.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-USING_OLD_RTRID OSPFv3 process [chars] encountered an error while finding a new router ID. The old router ID [chars] is being used as an interim value.

Explanation    OSPFv3 failed while attempting to allocate a router ID from the IPv4 address of one of its interfaces due to an unexpected internal problem.

Recommended Action    Use 'clear ospfv3 process' to force another attempt to find a valid router ID. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-4-VIRTUAL_IN_NON_BACKBONE Virtual link information found in non-backbone area: [chars]

Explanation    An internal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-5-ADJCHG Process [chars], Nbr [chars] on [chars] from [chars] to [chars], [chars]

Explanation    An OSPFv3 neighbor has changed state. The message describes the change and the reason for it. This message appears only if the log-adjacency-changes command is configured for the OSPFv3 process.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-6-AREA_DELETE Area [chars] is being deleted, please try later

Explanation    The configuration command could not be accepted because OSPFv3 is in the process of deleting the specified area. Try again later.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-6-AREACREATE Error creating area [chars]: [chars]

Explanation    An error was encountered when trying to create an area.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-6-BADCHKSUM Checksum Failure in database: area [chars] LSA type [hex] LSID [hex] adv rtr [chars]: Old Checksum [hex] New Checksum [hex]

Explanation    OSPFv3 has detected a checksum error in the database due to memory corruption.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-OSPFv3-6-REFBW_CHG Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers.

Explanation    Informational message reminding the user that reference bandwidth should be consistent across all routers in the area.

Recommended Action    No action is required.

PIM_NETIO Messages

Error Message     
 
    
    
   

%ROUTING-PIM_NETIO-3-DEBUG_ERR [chars] failed : '[chars]'

Explanation    PIM Netio dll failed initialization or registration with the debugging subsystem. This resulted in the restart of NetIO process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

POLICY_REPOSITORY_DYNREG Messages

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-ADD Failed to add node location [chars] for protocol: [chars], version: [chars], ap_name: [chars] preventing successful registration for this item, because: [chars].

Explanation    An error was encountered as the node location was being added to the attach point item. This will prevent the successful registration for this attach point and will leave this configuration space unverified with respect to policy configuration.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-CREATE Failed to create the attach point data for dynamic registration item: [chars], because: [chars]

Explanation    An error was encountered as attach point data was being created. This could cause problems with future configuration attempts, and it does indicate an internal inconsistency so it might be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-DATA Failed to extract [chars] data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as data was being extracted for the registration of this attach point. As such, the registration failed and the verification of configuration related to this attach point registration will NOT be performed. Thus, configuration could be accepted but could be unable to be processed by the protocols.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-DELETE Failed to delete the attach point data for dynamic registration item: [chars], because: [chars]

Explanation    An error was encountered as attach point data was being deleted. This could cause problems with future configuration attempts, and it does indicate an internal inconsistency so it might be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-DOCK Failed to dock the new data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as new attach point data was being docked. As a result, the new data has not been activated for this attach point. At this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-FIND Failed to find data for protocol: [chars], version: [chars], ap_name: [chars], during a [chars] operation, because: [chars]

Explanation    An error was encountered as we were looking up data for the above attach point. The operation in question do not succeed since we could not find this entry, and thus the policy_repository could be in an inconsistent state.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-INSTALL Failed to install the new attach point data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as new attach point data was being swapped out for old data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-MODIFY Failed to find data for a [chars] for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as we were looking up data for the above attach point. The operation in question did not succeed, and thus the policy_repository could be in an inconsistent state.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-REGISTER Failed to register (for verification) to the attach point data for dynamic registration item: [chars], because: [chars]

Explanation    An error was encountered as attach point data was being registered for verification. At this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-SWITCH We have detected a condition where there are conflicting registration values for protocol: [chars], version: [chars], ap_name: [chars], and are swapping out the current values for new values. The data for this can be viewed by executing the appropriate bind point show command.

Explanation    An error was encountered as the node location was being added to the attach point item. This will prevent the successful registration for this attach point and will leave this configuration space unverified with respect to policy configuration.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-UNDOCK Failed to undock the old [chars] data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as old attach point data was being undocked for new data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-UNLOAD Failed to unload the old attach point data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as old attach point data was being unloaded for new data. As a result, the old data is either still activated, or NO data is activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_DYNREG-3-UNREGISTER Failed to unregister (for verification) the old attach point data for protocol: [chars], version: [chars], ap_name: [chars], because: [chars]

Explanation    An error was encountered as old attach point data was being unregistered for new data. As a result, the registration for the old data is still activated for this attach point. As this point is would be best to restart the policy_repository to try to clear this inconsistency.

Recommended Action    Restart the policy_repository process to remedy this situation. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

POLICY_REPOSITORY_EDM Messages

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_BAG_ENCODE Failed to encode [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_BIND Failed to connect to SysDB ([chars])

Explanation    The process failed to connect to SysDB while starting the indicated subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_EDM_DATA_GENERATE Failed to generate [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be generated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_EDM_LIST_ADD Failed to add to an external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_EDM_LIST_CREATE Failed to create external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_EDM_REG Failed to register its external data manager

Explanation    The process failed when attempting to register its external data manager with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-3-ERR_SYSDB_UNBIND Failed to unconnect to SysDB ([chars])

Explanation    The process failed to disconnect from SysDB before starting the indicated subsystem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY_EDM-6-ERR_SYSDB_BAG_REG Failed to register its external data manager data blocks

Explanation    The process failed while attempting to register its external data manager data blocks with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

POLICY_REPOSITORY Messages

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_MEM_ALLOC Failed to allocate resources for [chars]

Explanation    The policy_repository process failed allocated memory for the operation specified.

Recommended Action    The policy_repository process may function properly in the future but the operations associated with this configuration are likely in an inconsistent state. Restarting the policy_repository may correct the situation if the memory is being consumed by this process; otherwise restarting the procees that is consuming the memory may be advisable. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_ORA_DOCK Failed to dock with ORA [chars], version = [chars], location = [chars], signature = [chars], path = [chars] because: [chars]. This will result in NO policy being monitored or processed for this client.

Explanation    The policy_repository process, while trying to dock with the client ORA encountered an error.

Recommended Action    Restart the policy_repository and/or client. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_SYSDB_BAG_DECODE An attempt is being made to decode item ([chars]) which failed ([chars])

Explanation    The system is attempting to process a policy object set or named policy and cannot decode the object.

Recommended Action    Look for out of resource conditions. If memory is low, then restart the policy_repository process and reapply the configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_SYSDB_CONNECT Failed to connect to the system database at '[chars]' ([chars])

Explanation    The policy_repository process failed to bind to the system database at the displayed bind point.

Recommended Action    The policy_repository process must be restarted before it can function correctly. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_SYSDB_GET Failed to retrieve configuration item: [chars] (Reason: [chars])

Explanation    The policy_repository process failed to retrieve an item from the system database.

Recommended Action    The policy_repository process may function properly in the future but the operations associated with this configuration are likely in an incinsistent state. Consider restarting the process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_SYSDB_REG_NOTIFY Failed to register for database notifications at: [chars] (Reason: [chars])

Explanation    The policy_repository process failed to register for notification of changes on the displayed database path.

Recommended Action    The policy_repository process must be restarted before it can function correctly. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-3-ERR_SYSDB_REG_VERIFY Failed to register for database verifications at: [chars] (Reason: [chars])

Explanation    The policy_repository process failed to register for verification of changes on the displayed database path.

Recommended Action    The policy_repository process must be restarted before it can function correctly. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-4-CLEANUP Failed to clean up policy '[chars]' ([chars])

Explanation    When deleting the specified policy, the policy_repository process encountered a problem. This could leave memory unfreed.

Recommended Action    If the policy_repository process is using an excessive amount of memory, consider restarting it with 'proc restart policy_repository' to clean up any unused memory. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-4-ERR_SYSDB_DELETE Failed to remove policy [chars] (Reason: [chars])

Explanation    The policy_repository process encountered an error while trying to remove the data for a deleted policy.

Recommended Action    This can only occur when there are no references to the deleted policy in the first place, and therefore will not have any harmful effects. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-4-PARSER_DLL Policy parser DLL: [chars]: [chars]@[chars].[dec]: [chars]

Explanation    A system call failed inside the routing policy parser DLL.

Recommended Action    Try again: the failure might have been due to resource issues. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-4-RPL_EDIT RPL editor: [chars]: [chars]@[chars].[dec]: [chars]

Explanation    A system call failed inside the RPL editor program.

Recommended Action    Try again: the failure might have been due to resource issues. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-4-SYSMGR_GET_NODE_STATE Failed to receive the [active/standby] state indication. Error: [chars]

Explanation    An error occurred while trying to get the system [active/standby] state. A state of REDUNDANCY_UNKNOWN will be assumed. This process also registers for notification of changes to the [active/standby] state. Thus, the state can be determined by this means as well. Failure to receive notification for either one of these means could result in this process not functioning properly. Note: At least one of the processes in an active/standby pair must be active in order to assure proper functioning.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-ARG_MISMATCH Argument list mismatch for statement '[chars] [chars]' in policy [[chars]].

Explanation    The user is trying to do an operation in which the number of arguments entered does not match the number of argument expected.

Recommended Action    Correct the number of parameters that are passed in. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-ATTACHPOINT_ADD Failed to associate [chars] attach point item '[chars]' to policy [chars]. This will leave the policy repository in an inconsistent state.

Explanation    The policy_repository process was not able to add the attach point to the policy in question. This means that the policy repository will not verify the statements in this policy against the attach point in question. This could allow statements to be added to the policy that (could) result in run time errors in the client at this attach point.

Recommended Action    Restart the policy_repository process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-ATTACHPOINT_MISMATCH Failed to process [chars] attach point item '[chars]' because [chars]. This will leave the policy repository in an inconsistent state.

Explanation    The policy_repository process was not able to extract the policy name OR id value for this attach point path. This means that the policies that are actually using this attach point will NOT be recorded and thus policies *could* be deleted while still in use.

Recommended Action    Restart the policy_repository. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-ITEM_UNSUPPORTED The item of type [chars] and value ([dec]) is not recognized by the policy_repository.

Explanation    The policy_repository process was not able to extract the the item for this type. Please add support to the policy_repository or remove support from the protocols.

Recommended Action    This indicates and internal inconsistency between the policy_repository and the protocols. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-OBJECT_INIT Failed to initialize [chars]. Error ([hex]): [chars]

Explanation    The policy_repository was atempting to initialize a data object and it failed.

Recommended Action    Look for out of resource conditions. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-OBJECT_REBUILD Failed to rebuild the [chars] data. Error ([hex]): [chars]

Explanation    The system was atempting to rebuild an object and it failed.

Recommended Action    Look for out of resource conditions. The policy_repository will exit and restart. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-POLICY_TOO_BIG Policy [[chars]] contains a large number of statements and would cause the policy repository to exceed resource limits. The policy repository is now inconsistent with the running configuration. To regain consistency, rollback to the previous configuration for this policy.

Explanation    The policy named is very long and/or complex, and in compiling it for execution, the policy repository exhausted resource limits. This was not detected by the usual checks at configuration verification time. Rather than crash, the policy repository is left with the previous configuration for this policy, if any.

Recommended Action    Rollback the configuration operation to regain consistency between the running configuration and the policy respoitory. Then, rewrite the policy in question in a simpler form. It may help to make use of policies with parameters to reduce the total policy size. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-SETS_REBUILD Internal inconsistency rebuilding sets for policy [chars] (Reason: [chars])

Explanation    The policy_repository process failed to rebuild the set references for the policy in question. This will result in an inconsistent state in the policy_repository and the process should be restarted. This could result in policies not functioning properly.

Recommended Action    The policy_repository process should be restarted to clean up the internal inconsistency. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-POLICY_REPOSITORY-7-VERIFY_APPLY Policy [[chars]] failed verification for use in policy [[chars]]

Explanation    The policy_repository process, while verifying a change to a policy, encountered an error while checking the validity of the change in the policies that are applied by that policy.

Recommended Action    Fix the offending argument in the applied policy so that it is accepted by the client (i.e. BGP, OSPF, etc.) Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RASF Messages

Error Message     
 
    
    
   

%ROUTING-RASF-3-NO_BASE_COMPARE There was a missing base compare function for an ORA.

Explanation    This is a logic error in the construction of one of the ORA entities. The compare for checking two different route values against each other was missing.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-3-NO_CMP_RETRIEVER There was a missing compare retriever function for an ORA.

Explanation    This is a logic error in the construction of one of the ORA entities. The function to actually perform the compare retriever operation was not defined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-3-NO_COMPARE There was a missing compare function for an ORA.

Explanation    This is a logic error in the construction of one of the ORA entities. A compare function was missing at the 'per route' level of detail.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-3-NO_RETRIEVER There was a missing retriever function for an ORA.

Explanation    This is a logic error in the construction of one of the ORA entities. The function to actually perform the retriever operation was not defined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-3-NO_SETTER There was a missing setter function for an ORA.

Explanation    This is a logic error in the construction of one of the ORA entities. The function to actually perform the setter operation was not defined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-4-ERR_DLL_REG Unable to register cerrno dll [chars] because [chars]

Explanation    The given cerrno dll could not be marked for use. This does not change the functionality of the system but does obscure the meaning of error codes presented by this part of the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-7-DBGINIT Unable to bring up debug event structures: [chars]

Explanation    The debug event initialization failed. The rasf will still run correctly, but debug commands may be unavailable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RASF-7-DBGSHUTDOWN Unable to shutdown debug event structures: [chars]

Explanation    The debug shutdown failed. The rasf will still run correctly, but debug commands may be unavailable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RETRY Messages

Error Message     
 
    
    
   

%ROUTING-RETRY-4-DEBUG_INIT [chars] [dec] [chars] [chars]

Explanation    Internal error. Retry debug library initilization failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RIB_LIB Messages

Error Message     
 
    
    
   

%ROUTING-RIB_LIB-3-ERR_LOCK_FATAL [chars] Pthread [chars], unexpected fatal error [[chars]]

Explanation    An unexpected fatal error occured when trying operate on a pthread lock.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB_LIB-3-FETCH_UPDATE Error fetching RIB update - [chars]

Explanation    Unexpected error fetching a RIB update notification. See error message for more information.

Recommended Action    Restarting the client process from which the errow was emitted, or the RIB server, may fix the problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RIB_LIB-4-ERR_POSSIBLE_CONNECTION_LEAK RIB client binding with a non-NULL connection handle. Potential client memory leak.

Explanation    A client passed a pointer to rib_bind which points to a non-NULL connection. This implies a connection leak in the client code.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB_LIB-4-UNBIND Failed to [chars] during client unbind - [chars]

Explanation    Unexpected error during client unbind operation. This may result in a resource leak.

Recommended Action    If there is a evidence of a memory leak in the process which reported this error, restart that process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RIB_QUERY_ORA Messages

Error Message     
 
    
    
   

%ROUTING-RIB_QUERY_ORA-3-CERRNO_REG Failure registering cerrno DLL with subsys num [unsigned int] and DLL name [chars]. Error: [chars] ([hex])

Explanation    A failure occurred during the registration of the DLL for decoding error codes from the component. This may render certain codes unprintable, but otherwise has no negative impact.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RIB_QUERY_ORA-3-INSTBUILD Failed to build policy operation '[chars]' for attribute '[chars]'.[chars]%s ([hex])

Explanation    There was an internal error in the routing policy library and as a result routing policy may not be applied correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RIB_QUERY_ORA-3-ORABUILD Failed to build ORA: [chars]; [chars] ([hex])

Explanation    There was an internal error in the routing policy library and as a result routing policy may not be applied correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ROUTING-RIB_QUERY_ORA-3-RUN Could not apply policy operation '[chars]' to attribute '[chars]': [chars] ([hex])

Explanation    There was an internal error in the routing policy library and as a result routing policy may not be applied correctly.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RIB Messages

Error Message     
 
    
    
   

%ROUTING-RIB-2-PARENT_UNREGISTER Parent [chars] ([chars]) ([dec]) unregistering from Vrf: [chars] Tbl: [chars] Safi: [chars], table id [hex], it still has [dec] dependants, context [chars]

Explanation    A RIB download client (typically bcdl_agent), unregistered from a table while it still has children referring to this table. The number of routes may no longer be insync in all FIBs. If corresponding bcdl_agent restarted just before this message was seen, this error message can be ignored.

Recommended Action    Restart the corresponding bcdl_agent process. *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB-3-CONVERGE_VERSION_MISMATCH Client [chars] has last signalled version [dec] which is less than the RIB version [dec] for Vrf: [chars] Tbl: [chars] Safi: [chars]

Explanation    A client updated the RIB for convergence but not with the latest version as known by RIB. This will have delayed or prevented the convergence of the routing table, and hence the purging of any stale routes from the forwarding table.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB-3-ERR_CHILD_REDIST_REQUESTS [chars] [dec], line [dec], client [chars] ([dec]) table [hex] Vrf: [chars] Tbl: [chars] Safi: [chars]

Explanation    An unexpected error occured when trying to add a path to the next-hop database.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB-3-ERR_LOCK_FATAL Pthread lock [chars], unexpected fatal error [[chars]]

Explanation    An unexpected fatal error occured when trying operate on a pthread lock.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%ROUTING-RIB-3-ERR_LOOKUP Table [hex], prefix