Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4
Layer 2 Messages
Downloads: This chapterpdf (PDF - 1.15MB) The complete bookPDF (PDF - 10.82MB) | Feedback

Layer 2 Messages

Table Of Contents

Layer 2 Messages

ATM_ILMI Messages

ATM_INARP Messages

ATM_NETIO Messages

ATM_OAM Messages

ATM_RM Messages

ATM_SAAR Messages

ATM_SOCKET Messages

ATM_VCCLASS Messages

ATM_VCM Messages

atmdrv Messages

ATMGCMGR Messages

ATMSNMP Messages

BFD Messages

BM Messages

CDP Messages

CDPCP Messages

CHDLC_EA Messages

CHDLC_MA Messages

CHDLC_SOCK Messages

CHDLCDLL Messages

d1qnetio Messages

DI Messages

DIV2_DM Messages

DRIVERS_UTIL Messages

DWDM Messages

ETHER_NETIO Messages

ether_spa_plugin Messages

ETHER Messages

ETHERNET Messages

FR_EDM Messages

FR_INARP Messages

FR_LMI Messages

FR_NETIO Messages

FR_SFRAR Messages

FR_SOCKET Messages

FR_UV Messages

FR_VCM_EA Messages

FR_VCM Messages

FRMIB Messages

G709 Messages

GATM Messages

gulf Messages

IPCP Messages

IPV6CP Messages

JDAM Messages

L2C Messages

L2FIB_DEBUG Messages

L2FIB_LIB Messages

L2FIB_SHM Messages

L2FIB Messages

L2VPN_DEBUG Messages

L2VPN_PW Messages

L2VPN Messages

LINK Messages

MAC_ACCOUNT Messages

MARVEL Messages

MLCTRLR Messages

MPLSCP Messages

MULTILINK_UV Messages

Multilink Messages

ND Messages

OSICP Messages

pm5315 Messages

pm5316 Messages

POS Messages

PPP_EA Messages

PPP_FSM Messages

PPP_LCP Messages

PPP_lite Messages

PPP_MA Messages

Serial Messages

SLARP_EA Messages

SLARP Messages

SLARP_Lite Messages

SONET_APS Messages

SONET_LOCAL Messages

SPA Messages

SPAMSG Messages

STREE Messages

T1E1 Messages

T3E3 Messages

UDLD Messages

VCM_CLIENT Messages

VCM_EA Messages

VCM Messages

vlan_netio Messages

vlea Messages

vlma Messages

WAN_INARP Messages

WAN_LIB_IFDB Messages

WAN_LIB_VCC Messages

XCONNECT Messages


Layer 2 Messages


This section contains all Layer 2 related System Error Messages, including Ethernet drivers, Packet-over-Sonet (PoS), SONET, PLIMS, and so forth. The following facility codes are represented in this module:

ATM_ILMI Messages

ATM_INARP Messages

ATM_NETIO Messages

ATM_OAM Messages

ATM_RM Messages

ATM_SAAR Messages

ATM_SOCKET Messages

ATM_VCCLASS Messages

ATM_VCM Messages

atmdrv Messages

ATMGCMGR Messages

ATMSNMP Messages

BFD Messages

BM Messages

CDP Messages

CDPCP Messages

CHDLC_EA Messages

CHDLC_MA Messages

CHDLC_SOCK Messages

CHDLCDLL Messages

d1qnetio Messages

DI Messages

DIV2_DM Messages

DRIVERS_UTIL Messages

DWDM Messages

ETHER_NETIO Messages

ether_spa_plugin Messages

ETHER Messages

ETHERNET Messages

FR_EDM Messages

FR_INARP Messages

FR_LMI Messages

FR_NETIO Messages

FR_SFRAR Messages

FR_SOCKET Messages

FR_UV Messages

FR_VCM_EA Messages

FR_VCM Messages

FRMIB Messages

G709 Messages

GATM Messages

gulf Messages

gulf Messages

IPCP Messages

IPV6CP Messages

JDAM Messages

L2FIB_DEBUG Messages

L2FIB_LIB Messages

L2FIB_SHM Messages

L2FIB Messages

L2VPN_DEBUG Messages

L2VPN_PW Messages

L2VPN Messages

LINK Messages

MAC_ACCOUNT Messages

MARVEL Messages

MLCTRLR Messages

MPLSCP Messages

MULTILINK_UV Messages

Multilink Messages

ND Messages

OSICP Messages

pm5315 Messages

pm5316 Messages

POS Messages

PPP_EA Messages

PPP_FSM Messages

PPP_LCP Messages

PPP_MA Messages

Serial Messages

SLARP_EA Messages

SLARP Messages

SLARP_Lite Messages

SONET_APS Messages

SONET_LOCAL Messages

SPA Messages

SPAMSG Messages

STREE Messages

T1E1 Messages

T3E3 Messages

UDLD Messages

VCM_CLIENT Messages

VCM_EA Messages

VCM Messages

vlan_netio Messages

vlea Messages

vlma Messages

WAN_INARP Messages

WAN_LIB_IFDB Messages

WAN_LIB_VCC Messages

XCONNECT Messages

ATM_ILMI Messages

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_ILMI-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_INARP Messages

Error Message     
 
    
    
   

%L2-ATM_INARP-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_INARP-2-NOMEM Operation failed due to memory shortage, function: [chars]

Explanation    Memory on the box is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_NETIO Messages

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-CARD_DLL Failed to open card specific dll [chars]

Explanation    Card specific dll may not be present

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INSERT_DICT Insertion to ATM Netio Dictionary fails

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-INVALID_DLL DLL not found for the specified card : [chars]

Explanation    Check the installation Dlls missing from package

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-LOAD_PATH Failed to get load path env variable for dll [chars]

Explanation    The env variable setting may not be set up for load path variable

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The DLL has failed to acquire the required amount of memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSE_FAILURE Failed to parse atm_netio.rules at line: [chars]

Explanation    The file atm_netio.rules has been modified and parsing fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-3-PARSER_NULL_PATH Path to load the atm_netio.rules is NULL

Explanation    The path to atm_netio.rules file cannot be located.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_NETIO-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_OAM Messages

Error Message     
 
    
    
   

%L2-ATM_OAM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_OAM-2-INTERNAL_ERR [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_OAM-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ATM_RM Messages

Error Message     
 
    
    
   

%L2-ATM_RM-1-SYSDB_ERR [chars] : [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_RM-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_RM-2-NOMEM Failed to allocate [dec] bytes due to memory shortage

Explanation    Memory on the router is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_RM-4-BANDWIDTH_ERR [chars] : Bandwidth available [unsigned int] : Failed to reserve [unsigned int]

Explanation    Insufficient bandwidth available. possible cause: Too many vc's inheriting QoS from class parameters

Recommended Action    check vc class configuration on interface If there are vcs you want specific QoS values for under the main interface, try configuring QoS on these vcs before applying class to the interface in order to stop unwanted inheritance. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_SAAR Messages

Error Message     
 
    
    
   

%L2-ATM_SAAR-2-INIT Failed to initialise ATM SAAR: [chars] ([chars])

Explanation    There was an error initialising the ATM SAAR component.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SAAR-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

ATM_SOCKET Messages

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_SOCKET-2-NOMEM Allocation of [dec] bytes failed due to memory shortage

Explanation    Memory on the router is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_SOCKET-3-RESMGR_ATTACH Failed to setup atm socket as a resource manager: [chars]

Explanation    The atm_io process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Recommended Action   

ATM_VCCLASS Messages

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-2-CONSUMER_INIT_ERROR [chars]

Explanation    A failure occurred during the initialization of ENS library or during NRS class creation. This probably indicates an underlying more severe problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-2-MEM_ERROR [chars]

Explanation    Failed to allocate dynamic memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-2-PRODUCER_INIT_ERROR [chars]

Explanation    A failure occurred during the initialization of ENS library or during NRS class creation. This probably indicates an underlying more severe problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-2-VCCLASS_LIB_INIT_ERROR [chars]

Explanation    A failure occurred during the initialization of the common VCCCLASS library. This probably indicates an underlying more severe problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-ATTACH_ERROR [chars]

Explanation    An ATM VCCLASS consumer has attempted to attach an unknown vcclass to its interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-CONSUMER_ENS_ERROR [chars]

Explanation    One or more ENS or NRS APIs has returned an error. The failure happens while the consumer is calling the ATM VCCLASS client APIs.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-CONSUMER_ERROR [chars]

Explanation    These are general ATM VCCLASS client API errors.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-CONSUMER_RCV_BUF_ERROR [chars]

Explanation    The consumer finds one or more invalid fields in the buffer received from the producer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-EDM_ERROR [chars]

Explanation    A failure occurred in the ATM VCCLASS EDM backend. As a result the VCCLASS data will not be delievered to the front end.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-ENS_ERROR [chars]

Explanation    One or more ENS or NRS APIs has returned an error. This failure happens on the producer side.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-INVALID_ARG [chars]

Explanation    One or more input arguments to an internal function is invalid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-PRODUCER_DATA_ERROR [chars]

Explanation    A failure occurred in the ATM VCCLASS producer while preparing the vcclass data to be sent to ENS.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-PRODUCER_HDLR_ERROR [chars]

Explanation    A failure occurred in the ATM VCCLASS producer handler while processing requests from the consumer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-SYSDB_ERROR [chars]

Explanation    A failure occurred related to SysDB or in one of the verify/apply/notify SysDB callback functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCCLASS-3-TREE_ERROR [chars]

Explanation    A failure occurred while accessing the ATM VCCLASS internal data structrure. There might be an inconsistency between the SysDB and the vcclass tree or the vcclass tree is corrupted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATM_VCM Messages

Error Message     
 
    
    
   

%L2-ATM_VCM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCM-2-INTERNAL_ERR [chars] : [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATM_VCM-2-SYSDB_ERR [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

atmdrv Messages

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR [chars], [dec] error, reason:[chars]

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_ENCAP [chars] - [dec]: [chars] rc=[hex] connid=[dec] key=[hex]

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_STS [chars] - [dec]: [chars] (rc = [hex])

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-2-ERR_VC [chars] - [dec]: [chars] (connid = [dec])

Explanation    atmdrv generic error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-3-cpk_err [chars]. Port [dec]: number of occurence = [unsigned int] intr_status = [hex]

Explanation    atmdrv cpk24 interrupt handling related errors, or alerts

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. If you cannot determine the nature of the error from the error message text, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-4-warning [chars], [dec] warning, reason:[chars]

Explanation    atmdrv warning message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, and mail this message to your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-atmdrv-7-db_dump reason:[chars] port:[dec], vpi/vci:[dec]/[dec], connid:[dec], channels(r/s):[hex]/[hex], shape:[dec], encap:[dec]

Explanation    atmdrv debug message

Recommended Action    None

ATMGCMGR Messages

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-DBG_INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the debug events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATMGCMGR-2-INIT Failed to initialize [chars], because of [chars].

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ATMSNMP Messages

Error Message     
 
    
    
   

%L2-ATMSNMP-3-IFMGR ATM SNMP: [chars]: [chars]: [dec]: [dec]

Explanation    A high severity error is encountered.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ATMSNMP-3-info ATM SNMP: [chars]

Explanation    debug msg

Recommended Action    None

Error Message     
 
    
    
   

%L2-ATMSNMP-3-SYSDB ATM SNMP: [chars]: [chars]: [dec]

Explanation    This message indicates the ATM SNMP library fails to perform a SYSDB operation. *DDTS*

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

BFD Messages

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_HIGH_WATERMARK BFD PPS allocation exceeds 90 percent of maximum.

Explanation    BFD has allocated 90 percent of its packet per second allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-4-RATE_LIMIT_WARNING_LOW_WATERMARK BFD PPS allocation now less 85 percent of maximum.

Explanation    BFD has released some of the previously allocated packet per second usage and is now at less than 85 percent of its allowance on this LC.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES No resources for session to neighbor [chars] on interface [chars], interval=[unsigned int] ms[chars]

Explanation    The BFD session can not be created or modified due to lack of resources.

Recommended Action    Remove other BFD sessions to free resources for this session

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_NO_RESOURCES_CLR Lack of resources condition has cleared for session to neighbor [chars] on interface [chars]

Explanation    Resources are now available for this session.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_REMOVED BFD session to neighbor [chars] on interface [chars] has been removed

Explanation    The BFD session has been removed. This is due to the application(s) removing the BFD session. This can happen as a result of BFD being unconfigured under the application(s) or as a result of the application(s) adjacency being removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_DOWN BFD session to neighbor [chars] on interface [chars] has gone down. Reason: [chars]

Explanation    The BFD session has gone down. This may be as a result of the forwarding path being down.

Recommended Action    Determine if the forwarding path to the neighbor has gone down.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_STATE_UP BFD session to neighbor [chars] on interface [chars] is up

Explanation    The BFD session is now up.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-BFD-6-SESSION_VERSION_CHANGE BFD session to neighbor [chars] on interface [chars] is administratively down due to version change from version [unsigned int] to version [unsigned int]

Explanation    The BFD session has been brought administratively down to change protocol version.

Recommended Action    No action is required.

BM Messages

Error Message     
 
    
    
   

%L2-BM-3-ERR_IIR_MEMBERSHIP Link [chars] in [chars] reported by IIR in bundle [chars].

Explanation    When synchronising with IIR during restart the link was reported to be in a different bundle from the checkpoint records of the process. This should never happen and is not recoverable. The information from IIR was discarded and the process is now out of step with IIR, possibly leading to further problems.

Recommended Action    Delete the checkpoint data for the Bundle Manager process that reported the error (run rm /tmp/chkpt_bundlemgr_distrib*) and restart the process.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ACTIVATE Failure during activation of [chars]. Error: [chars]

Explanation    A failure occurred during the activation of the process. Activation occurs when the card transitions to ACTIVE state. This error resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ADJ_DLL_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_ADMINSTATE Unable to [chars] administrative state for [chars] on [chars]. Error: [chars]

Explanation    The operation attempted failed. For a set this may mean that the link is UP when the bundle is SHUTDOWN. This can be resolved by 'no shut' and then 'shut' of the bundle. For a clear this may mean that the link remains DOWN when it has been removed from the bundle. This can be resolved by re-adding and then removing the link from the bundle again.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process has exited and restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_GROUP_CREATE Unable to create GSP group. Error: [chars]

Explanation    Creation of the group used to communicate between Bundle Manager processes failed. This resulted in the restart of the process.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show gsp groups command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show gsp groups output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IDENTICAL Attempting to order [chars] and [chars] that have identical port information

Explanation    The comparison between an entry in the bundle member list and a new entry to be inserted showed that both had identical port data. Because of this the new link could not be inserted into the list and the operation leading to this failed.

Recommended Action    Remove and re-add the configuration for the links named in the message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_DATA Invalid [chars] specified by IIR for : [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognised values for that type. The information is invalid and the result is that adjacencies for this bundle cannot be programmed in hardware.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_BDL_HANDLE Invalid (NULL) interface handle supplied for a bundle by IIR

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    If this event can be associated with changes to a particular bundle then delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_DATA Invalid [chars] specified by IIR for member : [unsigned int]

Explanation    The data specified in the IIR notification is not one of the recognised values for the type. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_MBR_HANDLE Invalid (NULL) interface handle supplied by IIR for a member of

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_OP Unable to report IIR op failure for b_ifh [hex], m_ifh [hex] (op [chars], state [chars]). Error: [chars]

Explanation    An error occurred processing the IIR event and the bundle EA process was unable to report this error back to IIR. This may lead to some inconsistency with the bundle membership in the data plane not matching what is intended according to the control plane.

Recommended Action    The failure to report the error back to IIR suggests a problem in the connection to IIR. This may have been a transient problem, but restarting ifmgr and/or the bundlemgr_ea process on the location of the error might be necessary. The error that should have been reported also needs to be dealt with. This error may have come from some lower layer platform component, possibly a resource allocation error. If the error code provides some information as to the failure then take action appropriate to the error. If the error code is not specific then take action according to whether the event was a link activation or a link deactivation/deletion. For activation problems unconfigure and reconfigure the member link - if this fails try restarting the bundlemgr_ea process after unconfiguring the member link. For deactivation/deletion failures try restarting the improxy process to trigger a complete resync by the bundlemgr EA.

Error Message     
 
    
    
   

%L2-BM-4-ERR_IIR_SUB_HANDLE Invalid (NULL) interface handle supplied by IIR for a sub-interface of

Explanation    The interface handle specified in the IIR notification was NULL. The information is invalid and will be ignored.

Recommended Action    Delete and recreate the bundle. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_INIT_ENS Failure to initialise ENS - retry scheduled. Error: [chars]

Explanation    A failure occurred during the initialization of ENS library in the process. This probably indicates an underlying more severe problem. A retry will be attempted.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_LINK_ATTACHED Link [chars] is attached to [chars] that is thought to have no attached members.

Explanation    This process believes that there are no aggregatable links, but this link is marked as attached. This error is most likely caused by failing to attach or detach a link correctly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MEM_ALLOC Unable to allocate [unsigned int] bytes of memory.

Explanation    Memory allocation failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_CLEANUP Failure during cleanup of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the cleanup of the DLL. This may result in the DLL not being completely cleaned up, possibly causing errors in a subsequent re-initialization of the DLL.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MIB_INIT Failure during intialization of [chars] in the dot3ad MIB DLL. Error: [chars]

Explanation    A failure occurred during the initialization of the DLL. This resulted in the DLL not being loaded into the SNMP agent, and thus the MIB services will not be available.

Recommended Action    Restart the snmp process reporting the error. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_MTU_IMPOSE Imposition of configured MTU failed for [chars], will continue to use previous value: [unsigned int]

Explanation    The MTU imposition was rejected by IM or another client. The bundle will continue to operate with the previously configured MTU.

Recommended Action    Check that the configured MTU is within approrpriate ranges for the interface type and network layer protocols on the interface. Remove the configuration and reapply.

Error Message     
 
    
    
   

%L2-BM-4-ERR_NETIO_INIT Failure [chars] in the bundle NetIO DLL during [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the bundle NetIO DLL. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user. One possible reason for the error is a low memory condition, particularly if the failure was in allocating trace buffers.

Recommended Action    If the error message indicates the failure is low memory condition, reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Otherwise, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_PAKMAN Unable to handle pakman corruption error: [chars]. Process exiting

Explanation    A packet manager corruption has been reported and the Bundle Manager process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RECREATE_BUNDLE Unable to recreate bundle . Error: [chars]

Explanation    When recovering the checkpointed data for a bundle, an error occurred and the data is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show interface command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show adjacency detail hardware location command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show adjacency detail hardware location output, call your Cisco technical support representative and provide the representative with the gathered information. If the bundle appears correctly in the output of all three commands then no further action is required, otherwise unconfigure and reconfigure the bundle.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RECREATE_LINK Unable to recreate link [chars] in [chars]. Error: [chars]

Explanation    When recovering the checkpointed data for a link, an error occurred and the data is lost.

Recommended Action    Identify the bundle in which the link was a member. Copy the error message exactly as it appears on the console or in the system log. Issue the show interface command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show interface output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the show bundle command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show bundle output, call your Cisco technical support representative and provide the representative with the gathered information. If the member appears correctly in the output of both commands then no further action is required, otherwise unconfigure and reconfigure the member.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_BUNDLE Unable to repair bundle checkpoint structures. Error: [chars]

Explanation    When repairing the checkpoint structures for the bundle database an error occurred for named bundle and the bundle was not checkpointed. The next time an attempt is made to checkpoint the bundle it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_DATABASE Unable to repair [chars] database. Failure during checkpoint [chars]. Error: [chars]

Explanation    When repairing the checkpoint structures for the named database an error occurred in the database checkpoint registration. As a result the process was intentionally restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPAIR_LINK Unable to repair checkpoint structures for link [chars] in [chars]. Error: [chars]

Explanation    When repairing the checkpoint structures for the link database an error occurred for named link and the link was not checkpointed. The next time an attempt is made to checkpoint the link it will fail and the checkpoint table will be reconstructed again, perhaps more successfully.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_REPLICATE Replication failed for [chars], when adding member [chars]. Error: [chars]

Explanation    When attempting to replicate the bundle to the member interface location, the replication operation failed. This probably happened because some hardware resource on the LC where the member is located was exhausted. The record of the member will be removed from the bundle process on the RP but will still be referenced by the bundle process on the LC.

Recommended Action    Determine whether the hardware resources for the LC have been oversubscribed, e.g. more VLANs on the LC and on the bundle that the LC can support. If this is the case, reduce the number of allocated VLANs. Then remove the member configuration and reapply.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESTORE_LINK Unable to restore link [chars] in [chars]. [chars]. Error: [chars]

Explanation    When restoring the link an error occurred and to maintain consistency the data was removed. It is likely, given the error, that the link had been OIR removed.

Recommended Action    Verify that the link has not been OIR removed. If it has not, remove the bundle membership configuration and reapply it. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_EXCEED_IIR Exceeded the IIR resync limit for [chars]. Process exiting.

Explanation    The maximum number of attempts to resync with IIR have been exceeded for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RESYNC_SCHED_IIR Unable to schedule an IIR resync for [chars]. Process exiting.

Explanation    An attempt to schedule a resync with IIR has failed for this bundle. The safest course of action is to restart the process and this has been done.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED Exceeded maximum number of retries for [chars]

Explanation    After attempting to resend or query information a number of times, the retry limit has been exceeded and no more attempts will be made. The effect of the message will therefore be lost. The impact will depend on the message which was lost. If the message refers to a global error then the process will exit and be restarted.

Recommended Action    If the message referred to a global error then check that the process has restarted successfully. If the message referred to a bundle or bundle member then check that the object is still configured and still exists. Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_GSP Retry limit for GSP initialization exceeded: [chars]

Explanation    After attempting to create the GSP group used for communications with the Bundle Manager process on another node a number of times, the retry limit has been exceeded. The cause of the failure is very likely to be some external communication failure - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.

Recommended Action    Check that other processes are not reporting similar communication errors, as this is likely to be a general communication problem. The Bundle Manager process has exited and will be restarted, so no action is needed, though unless the communication problem is resolved the process will still not be able to startup.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_IMP Exceeded the retry limit for IMP events.

Explanation    The maximum number of attempts to retry an IMP message has been exceeded. An error has occurred in the clean up of a bundle, so there may be residual data for the bundle in the linecard components which could cause subsequent problems. Restart the process that reported the error to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_EXCEED_SYSTEM_MAC Retry limit for system MAC address query exceeded: [chars]

Explanation    After attempting to query the system MAC address from SDRd a number of times, the retry limit has been exceeded. The cause of the failure is likely to be an issue with SDRd or Shelfmgr - so check for evidence of this. The process will exit and be restarted automatically so no futher action is needed for Bundle Manager to retry.

Recommended Action    The Bundle Manager process has exited and will be restarted, so no action is needed. Check that the board (EEPROM etc.) is correctly programmed since this is the source of the MAC address information and therefore one possible cause of the problem.

Error Message     
 
    
    
   

%L2-BM-4-ERR_RETRY_SCHED Unable to send update for [chars] and unable to schedule retry: [chars]

Explanation    A timeout occurred sending an update to a Bundle Manager process on another node. Due to a problem with the retry mechanism, a resend of the message could not be scheduled. The effect of the message will therefore be lost. The impact will depend on the message which was lost.

Recommended Action    Make a minor change to the settings of the object experiencing the problem. This will trigger another attempt to send an update. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    Check on the status of the sysmgr process on the node from which the error was reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-4-ERR_UNREPLICATE Unreplication failed for [chars], when removing member [chars]. Error: [chars]

Explanation    When attempting to unreplicate the bundle from the member interface location, the unreplication operation failed. Some hardware resources may continue to be used for the bundle on the location of the member that was removed. It is also possible that there could be a problem replicating the bundle to that location again if a new member is added.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-BM-5-CHURN Interface [chars] in [chars] [chars] on actor system

Explanation    Churn has either been detected (due to the failure of a link to synchronize soon enough) or the churn state has now cleared.

Recommended Action    If churn has been declared, check that the configuration for the link allows it to aggregate, and fix as appropriate. Things to check for are links which are incompatible with each other, or misconfigurations between the two ends of the link which is reporting churn.

Error Message     
 
    
    
   

%L2-BM-6-DISTRIBUTING [chars] [chars] in Distributing state as part of [chars]

Explanation    This is an informational message reporting that a link has entered or left Distributing state as part of a bundle interface. The link configuration may have just been changed or there may be an operational reason for the event such as a state change or LACP protocol update.

Recommended Action    Nothing, this is not an error.

Error Message     
 
    
    
   

%L2-BM-6-MIN_MAX [chars] is down because the minimum active link threshold ([unsigned int]) is greater than the maximum permitted links ([unsigned int])

Explanation    This is an informational message reporting that a bundle is operationally down because the configuration for minimum active links and maximum active links conflicts. The number of active links required for the bundle to come up is greater than the number of links permitted to be active in the bundle, and there are at least enough links held in standby state for the bundle to come up if the maximum active link criteria were removed.

Recommended Action    If this situation is not intended then either reduce the minimum active link threshold or increase the maximum links permitted in the bundle.

CDP Messages

Error Message     
 
    
    
   

%L2-CDP-3-ERR_CONN Connection error on [chars]([pointer]): [chars]

Explanation    An error occurred on one of the event connections managed by CDP which CDP could not recover automatically.

Recommended Action    Try restarting CDP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_ATTR_REGISTRATION Unable to register for duplex change notifications: [chars]

Explanation    CDP registration for duplex change notifications failed. This means that duplex information will be missing from outgoing CDP packets

Recommended Action    Try restarting CDP ('proc restart cdp location '). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_ADD Failed to add the CDP capsulation to interface [chars]: [chars]

Explanation    CDP could not install the CDP capsulation on the specified interface and hence it is not possible for CDP to send or receive any packets on this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_CAPS_REMOVE Failed to remove the CDP capsulation on interface [chars]: [chars]

Explanation    CDP could not uninstall the CDP capsulation on the specified interface and hence CDP may be in an inconsistent state.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_MTU_REGISTER Failed to register for MTU size changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for MTU size changes on this particular interface. This may cause problems sending CDP packets.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IM_STATE_REGISTER Failed to register for state changes on interface [chars]: [chars]

Explanation    CDP failed to register with the interface manager for state changes on this particular interface. This means CDP will be unable to track the state of the interface. CDP functionality may be impaired.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface to try to recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_INIT Initialisation of CDP on interface [chars] failed: [chars].

Explanation    CDP is unable to run on the specified interface. It is likely that this is due to a lack of available resources.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Configuring 'cdp disable', 'cdp enable' on the interface, or restarting CDP on the affected node may recover the situation.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_INTF_STATS No CDP protocol statistics can be collected on [chars]: [chars]

Explanation    It was not possible to register for stats collection on the specified interface. The entry in the 'show interface accounting' command is likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location proc restart statsd_server location If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_ADDRESS_SCAN [chars]: Failed to scan the IPv4 addresses for this interface: [chars]. This means that IPv4 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv4 addresses on this interface has failed. This means that IPv4 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv4 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location or proc restart ipv4_ma location

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV4_REGISTRATION Unable to register for IPv4 address notifications: [chars]. This means that IPv4 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv4 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv4 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv4_ma as the address provider on this node may rectify the problem. proc restart cdp location or proc restart ipv4_ma location

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_ADDRESS_SCAN [chars]: Failed to scan the IPv6 addresses for this interface: [chars]. This means that IPv6 information will be missing from outgoing CDP packets

Explanation    A scan of the IPv6 addresses on this interface has failed. This means that IPv6 address information for this interface will not be included in outgoing CDP packets. The neighboring device will not see the IPv6 address information for this interface.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location or proc restart ipv6_ma location

Error Message     
 
    
    
   

%L2-CDP-3-ERR_IPV6_REGISTRATION Unable to register for IPv6 address notifications: [chars]. This means that IPv6 information will be missing from outgoing CDP packets.

Explanation    CDP registration with the IP address library has failed. This means that IPv6 address information for interfaces local to this node will not be included in outgoing CDP packets. The neighboring devices will not see the IPv6 address information for this router's interfaces.

Recommended Action    Restarting CDP as the address consumer, or the ipv6_ma as the address provider on this node may rectify the problem. proc restart cdp location or proc restart ipv6_ma location

Error Message     
 
    
    
   

%L2-CDP-3-ERR_STATS No per-interface CDP protocol statistics can be collected: [chars]

Explanation    It was not possible for CDP to register for per-interface CDP protocol stats collection. The entries in the 'show interface accounting' command are likely to be inaccurate for CDP packets.

Recommended Action    Try restarting CDP and the Statistics server process on this node. proc restart cdp location proc restart statsd_server location If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-3-STALE_TLV On [chars] the [chars] TLV is not up to date: [chars]

Explanation    CDP received a notification to update a TLV that it sends but failed to do so due to the error given. The information stored by CDP is now out of date.

Recommended Action    Perform 'cdp disable', 'cdp enable' on the interface. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-DUPLEX_MISMATCH Duplex mismatch discovered on [chars] ([chars]), with [chars] [chars] ([chars]).

Explanation    CDP discovered mismatching duplex configuration on neighboring interfaces.

Recommended Action    Configure the interfaces with the same duplex (full or half).

Error Message     
 
    
    
   

%L2-CDP-4-ERR_MULTICAST_ADDR_SET Error setting up the CDP multicast address on [chars] (media [chars]): [chars]

Explanation    The driver returned an error while setting up the CDP multicast address. It is possible that CDP packets will be dropped and not reach the CDP process.

Recommended Action    If CDP packet loss is seen then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-ERR_TABLE_RESIZE Not enough memory to clear and resize the CDP table

Explanation    CDP ran out of memory when trying to resize the CDP hash table.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. CDP will try and continue to use the previous CDP table.

Error Message     
 
    
    
   

%L2-CDP-4-NEIGHBOR_LIMIT The CDP cache on this node is full. It contains [dec] neighbor entries

Explanation    The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defend against DoS attacks.

Recommended Action    Check the existing CDP neighbors for bogus entries, CDP may be the victim of an attempted DoS attack. The 'clear cdp table' command can be used if CDP neighbor entries need removing.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA CDP did not find any recognized media to run over

Explanation    CDP failed to initialize the media module because it could not find any media that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    If there are no interfaces on this node with a media type that CDP is expected to run on then this could be a normal condition. If it is expected that CDP should run on the type of interfaces on this node then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-NO_KNOWN_MEDIA_DRIVERS CDP did not find any recognized media drivers

Explanation    CDP failed to initialize the media module because it could not find any media drivers that it recognizes. This may be a normal situation if CDP does not support the interface types on this node. In other circumstances CDP should recover automatically by restarting.

Recommended Action    There are no media drivers for the interfaces on this node. If CDP does not support the interface types on this node then this could be a normal situation Otherwise Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_INIT Initialization warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during the initialization of CDP. CDP will restart and this should resolve the problem.

Recommended Action    CDP will try to recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-4-WARN_TERM Termination warning, module: [chars], operation: [chars]: [chars]

Explanation    A failure occurred during CDP's termination. In this situation CDP should recover automatically.

Recommended Action    CDP should recover automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDP-6-DELETED_NEIGHBOR CDP Neighbour [chars] on interface [chars] has been deleted, remote interface [chars]

Explanation    An entry has been removed from the CDP neighbors table. Notification of deleted CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-CDP-6-NEW_NEIGHBOR New CDP neighbor [chars] detected on interface [chars], remote interface [chars]

Explanation    A new entry has been added to the CDP neighbors table. Notification of new CDP neighbors requested through 'cdp log adjacency changes'.

Recommended Action    No action is required.

CDPCP Messages

Error Message     
 
    
    
   

%L2-CDPCP-3-DEBUG_ASSOC Conditional debug association failed; [chars]

Explanation    An error has occurred upon attempting to associate conditional debugging with PPP debug commands. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-DEBUG_COND_REGISTER Conditional debug registration failed; [chars]

Explanation    An error has occurred upon attempting to register for conditional debugs. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-DEBUG_REGISTER Debug registration failed; [chars]

Explanation    An error has occurred upon attempting to connect to the debug server. This may cause debug messages to not appear.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_CONN Connection [chars] failed for [chars]; [chars]

Explanation    An failure in the reconnection software in the function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_EVENT Failed to [chars] [chars] event; [chars]

Explanation    An event handler has returned an error condition

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_EVENT_MGR_CREATE CDPCP Failed to initialize event manager; [chars]

Explanation    Initialization of the event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_IM_STATE Failed to get basecaps state for [chars]; [chars]

Explanation    CDPCP was unable to determine the state of the basecaps and has assumed it to be down. CDPCP will remain closed until the interface is brought down and up again.

Recommended Action    Shut the interface and then bring it up again.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_MBOX_ADD [chars] [chars] failed to add [chars]; [chars]

Explanation    An attribute has failed to be added to the message which was being constructed which has caused the message to be discarded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_MBOX_CREATE [chars] failed to create [chars]; [chars]

Explanation    An attempt to allocate a message failed. This may be due to lack of resources.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_MBOX_INIT Failed to init [chars] message for [chars]; [chars]

Explanation    The initialization of a message failed, this results in a failure to communicate with the Link Control Protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_MBOX_SEND [chars] failed to send [chars]; [chars]

Explanation    A message failed in a send attempt to a particular mailbox.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_MQ_OPEN Failed to open message queue [chars]; [chars]

Explanation    CDPCP has failed to open a mailbox channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_NETIO_RXQ Failed to support [chars] [chars]; [chars]

Explanation    CDPCP has attempted to update the data component with the current status of the control protocol. The attempt has failed which will has the effect of leaving the data component with the previous set of information. This may result in an inability to negotiate CDPCP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_SYSDB SysDB [chars] failed; [chars]

Explanation    CDPCP cannot perform some SysDB operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_SYSDB_NOTIFICATION Failed to [chars]register for SysDB notification of [chars]; [chars]

Explanation    CDPCP cannot (un)register for SysDB notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-ERR_TIMER [chars] [chars] timer [chars]

Explanation    The manipulation of a timer had an abnormal side effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-3-LTRACE_INIT CDPCP Failed to initialize the ltrace buffer; [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_EVENT_WAIT Error waiting for event; [chars]

Explanation    The event loop has received a message of a type it does not recognize. All events should be received by handlers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_INTERFACE_NULL [chars]: Interface NULL

Explanation    A function was called with a NULL interface pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_MEMORY Insufficient memory for [chars]

Explanation    CDPCP failed to allocate memory for a structure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_MQ_RECEIVE Error receiving from message queue; [chars]

Explanation    CDPCP has failed to receive a message from its mailbox.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_NO_INTERFACE Interface [chars] not found

Explanation    A SysDB name lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-4-ERR_NO_INTERFACE_STRUCT Structure for interface [chars] not created; [chars]

Explanation    CDPCP failed to create an interface structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-6-ERR_IM_CONNECT Failed to [chars]bind [chars] IM; [chars]

Explanation    CDPCP has failed to either bind to or unbind from the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-CDPCP-6-ERR_IM_ENCAPS Failed to [chars] [chars] encapsulation; [chars]

Explanation    CDPCP has failed an encapsulation operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-CDPCP-6-ERR_IM_EVENT Failed to [chars] event; [chars]

Explanation    CDPCP has failed to either initialize or specify an event with the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-CDPCP-6-ERR_IM_PROTO Failed to [chars] [chars] protocol; [chars]

Explanation    CDPCP has failed a protocol operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CHDLC_EA Messages

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC EA process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The cHDLC EA process will restart

Explanation    A failure occured during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_EA-6-ERR_IMP_MULTIPLE_NTFCNS : Multiple [chars] notifications received in a single batch from improxy

Explanation    A batch from IMProxy contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC EA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLC_MA Messages

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_IIR_BDL_OP The cHDLC MA failed to process a bundle IIR [chars] message on , error: [chars]

Explanation    The chdlc_ma process failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the basecaps is out of step with the bundle configuration.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_INTF_UP_DOWN An error has occured resulting in the interface state being UP, and the line state being DOWN on interface . Because keepalives are disabled the line will never come up. The situation may be resolved by shutting and no shutting the interface, or enabling keepalives.

Explanation    If keepalives are disabled and certain errors occur then the interface and line state can end up being out of step. Without keepalives enabled, SLARP has no way to recover by discovering the correct line state, so user intervention is required for a chance of recovery.

Recommended Action    shut and then no shut the problematic interface, or enable keepalives on the interface.

Error Message     
 
    
    
   

%L2-CHDLC_MA-3-ERR_SYSMGR_SOCK_FEAT_START Startup of the cHDLC Socket feature has unexpectedly failed: [chars]

Explanation    The cHDLC socket feature unexpectedly failed to be started by sysmgr. This may mean that processes which use cHDLC sockets to send and receive packets will be unable to do so, and may not be working correctly. Symptoms would include loss of SLARP keepalive packets causing the line state to go down, loss of CDP packets and loss of LACP packets on cHDLC encapsulated interfaces.

Recommended Action    The problem can be fixed by manually starting the cHDLC Socket server process on the affected node using the command 'process start chdlc_socket location '. The command 'show process chdlc_socket location ' will indicate the state of the process. Once the socket server process is running, no further action is required.

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC MA process will restart

Explanation    An error occured in the event loop.The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The process will restart

Explanation    A failure occured during the initialization of the process. The cHDLC MA process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_MA-6-ERR_IM_MULTIPLE_NTFCNS : Multiple [chars] notifications received in a single batch from Interface Manager

Explanation    A batch from Interface Manager contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the cHDLC MA. No problems should be seen as a result.

Recommended Action    *NONE*

CHDLC_SOCK Messages

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_EVM_EVENT_BLOCK Error receiving an event: [chars]. The cHDLC socket server process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_INIT Failure during intialisation of the chdlc_socket process - specifically [chars]. Error: [chars]. The process will restart

Explanation    A failure occurred during the initialisation of the cHDLC socket process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-CHDLC_SOCK-4-ERR_PAKMAN_CORRUPTION Unable to handle pakman corruption error: [chars]. chdlc_socket process restarting

Explanation    A packet manager corruption has been reported and the cHDLC Socket process has failed to cleanup to recover from the problem. The process will exit and be automatically restarted to recover from this situation.

Recommended Action    It is expected that restarting the process will fix this problem. This is done automatically so no action should be required. If the problem recurs, then there is a problem in packet manager. A drastic solution would be to reload the linecard.

CHDLCDLL Messages

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_DEBUG_REGISTER Could not register for debug events : [chars]

Explanation    There was an error registering the cHDLC Netio debug with the debug library. No debug will be available for the cHDLC Netio DLLs.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_PKT_ENCAP Encapsulation of HDLC packet failed. Packet type-code [hex]

Explanation    The encapsulation of an HDLC packet failed for the network protocol with the ethernet type code specified. The packet has been dropped.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%L2-CHDLCDLL-3-ERR_TRACE_REGISTER Could not register with tracing infrastructure: [chars]

Explanation    An attempt to register with the tracing infrastructure failed. This will mean that tracing for the cHDLC Netio DLLs will not be available.

Recommended Action    *SUPPORT*

d1qnetio Messages

Error Message     
 
    
    
   

%L2-d1qnetio-3-CHAIN_BUILDER_FAILED The chain build function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to set up an interface. Software forwarding VLAN functionality on the affected node may be impaired.

Recommended Action    It may help to restart the VLAN EA process on the affected node, with process restart vlan_ea location [location]. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-IDB_NOT_FOUND The Netio IDB associated with handle [hex] could not be found

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to process a message sent to a particular interface because the interface does not exist in NetIO. Software forwarding VLAN functionality on the affected interface may be impaired. The interface can be determined from its handle with show im chains ifhandle [handle].

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-REGISTRY_CREATION_FAILED Unable to create the protocol registries during capsulation initialization

Explanation    The 802.1Q NetIO component could not necessary data structures during its initialization. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-SUBBLOCK_REG_FAILED 802.1Q Netio failed to register the dot1q_ether subblock (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to initialise on the specified node. Software forwarding VLAN functionality on the affected is likely not to work.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-3-TRACE_INIT_ERROR A error occurred during trace initialization, err: [chars]

Explanation    The 802.1Q NetIO component encoutered an error during trace buffer initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-CHAIN_UNBUILDER_FAILED The chain unbuild function failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up an interface. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEBUG_INIT_ERROR An error occurred during debug initialization (error: [chars])

Explanation    The 802.1Q NetIO component encoutered an error during debug initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-DEVCTL_NOT_SUP Unsupported NetIO devctl code ([dec]) received

Explanation    The 802.1Q NetIO component received an unexpected message. The message has been ignored. This may indicate that there is a version mismatch among the VLAN components.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-d1qnetio-4-TERM_FAILED 802.1Q NetIO termination failed because '[chars]' (error: [chars])

Explanation    The software forwarding support for IEEE802.1Q VLANs was unable to clean up. Forwarding should not be affected.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

DI Messages

Error Message     
 
    
    
   

%L2-DI-3-CHANNELCREATE unable to create channel [chars] (Error code [int])

Explanation    Process failed to create communication channel and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-CHKPT unable to create checkpoint service.

Explanation    Process failed to create checkpoint service and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-COMMAND Three command line parameters required: depository_id promid (0/1/2/3)

Explanation    Process received wrong third command line parameter and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-COMMAND3 Third command line parameter is [unsigned long int].It must be 0/1/2/3.

Explanation    Process received wrong third command line parameter and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-CONNECTION Unable to connect to channel [chars] (Error code [int])

Explanation    Process failed to connect to communication channel and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DESTINSANE Data structure destination organizer [chars] is inconsistent for destination [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DESTORG unable to create destination organizer.

Explanation    Process failed to create destination organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DIDORG unable to create DID organizer.

Explanation    Process failed to create DID organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLABSENT Driver DLL [chars] is absent on the platform.

Explanation    A specific driver DLL is required to run certain hardware detected.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLORG unable to create DLL organizer.

Explanation    Process failed to create DLL organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-DLLSYMMISSING Driver DLL [chars] has missing symbol [chars].

Explanation    A specific driver DLL is not correct.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-ENTRY One of the drivers unable to init.

Explanation    Process unable to init one of the drivers and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-ERRORG unable to create error organizer.

Explanation    Process failed to create error organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVE Failed to init event manager event.

Explanation    Process failed to create event manager event and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVELOOP IM notify event manager loop exited (Error no=[unsigned long int]).

Explanation    Process terminated event manager loop and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-EVEMGR Failed to create event manager.

Explanation    Process failed to create event manager and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INCONSISTINSTHASH Data structure Instance Hash is inconsistent for instance id [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INCONSISTRSRCHASH Data structure Resource Hash is inconsistent for resource id [unsigned long int].

Explanation    Process detected inconsistent data structures and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INSTHASH unable to create instance hash.

Explanation    Process failed to create instance hash and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INSTSTORE unable to create instance persistence store.

Explanation    Process failed to create instance persistence store and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-INTORG unable to create interrupt organizer.

Explanation    Process failed to create interrupt organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MAINLINE Unable to create mainline ipc server.

Explanation    Process unable to create mainline ipc server and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MUTEXINIT Mutex initialization error [chars] (Error code [int])

Explanation    Process failed to initialize a mutex and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-MUTEXLOCKFAIL [chars] operation failed in [chars]; reason [chars]

Explanation    DI failed to lock the packet mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DI-3-NETIOEST NetIO failed to connect to driver_infra_partner and exiting..

Explanation    The initial set up between two driver processes failed. NetIO exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-OUTMEM malloc ([unsigned long int] bytes) from::[chars] failed.

Explanation    Process failed to allocate run-time memory and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-PEERSTORE unable to create peer persistence store.

Explanation    Process failed to create peer persistence store and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOMISSING No installed software to match Hardware in slot [unsigned long int] (PROMID [unsigned long int]).

Explanation    Report missing driver registration.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOMISSING1 No installed software to match Hardware in I/O slot in route-processor [unsigned long int] (PROMID [unsigned long int]).

Explanation    Report missing driver registration.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-REGOORG unable to create registration organizer.

Explanation    Process failed to create registration organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-RESIDORG unable to create RESID organizer.

Explanation    Process failed to create RESID organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-RESOURCEHASH unable to create resource hash.

Explanation    Process failed to create resource hash and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-SHMWIN failed to reserve the shmwin VM region.

Explanation    Process failed to reserve the shmwin VM region and hence exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-STARTCHKPT unable to start checkpoint service.

Explanation    Process failed to start checkpoint service and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-STARTDESTORG unable to start destination organizer.

Explanation    Process failed to start destination organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-SYNHORG unable to create synchronizer organizer.

Explanation    Process failed to create synchronizer organizer and hence terminating.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%L2-DI-3-THREADCREATE Unable to create thread [chars] (Error code [int])

Explanation    Process failed to create thread and hence terminating.

Recommended Action    'No action is required.'

DIV2_DM Messages

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INFO driver manager: service degrading error, reason = [chars]

Explanation    Driver manager encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-INIT Driver manager: init. error encountered, reason=[chars]

Explanation    Driver manager encountered an error and is not able recover frm it. A reason text will be supplied. Call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DIV2_DM-3-NO_MEM Driver manager: memory allocation error for bytes

Explanation    Driver manager encountered a fatal memory allocation error

Recommended Action    Reduce other system activity (e.g. by killing non-essential processes) to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

DRIVERS_UTIL Messages

Error Message     
 
    
    
   

%L2-DRIVERS_UTIL-3-TUPLE_READ_ERROR [chars]: Tuple read failed with error [hex] [chars]

Explanation    An error occured when trying to read the tuple from sysdb.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

DWDM Messages

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL dwdm: fatal error encountered, reason=[chars]

Explanation    dwdm encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-FATAL_2 dwdm: fatal error encountered, reason=[chars], errno=[dec]

Explanation    dwdm code encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-INFO dwdm: service degrading error, reason = [chars]

Explanation    The dwdm encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-DWDM-3-NOT_YET_IMPLEMENTED dwdm: this function is not yet implemented

Explanation    dwdm, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETHER_NETIO Messages

Error Message     
 
    
    
   

%L2-ETHER_NETIO-4-DEBUG_REG Debug registration failed: [chars]

Explanation    It was not possible for the Ethernet slow path support to initialize its debugging support. Some of the output from debug ether-netio output may be incomplete.

Recommended Action    No action is required.

ether_spa_plugin Messages

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-ERRORRECOVER A Hardware or Software error occurred. Reason : [chars] Automatic Error recovery initiated. No further intervention required.

Explanation    An error occurred in one of the devices, recovery would be attempted. If recovery succeeds no further messages would be logged and no intervention would be required.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-OPTICS_OIR An Optics is [chars] for bay [dec] and port [dec]

Explanation    The Optic Interface Module (OIM) for the specified port either has been inserted or removed.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-ether_spa_plugin-6-UNSUPPORTED_OPTICS [chars] port [dec] security check failed . Disable

Explanation    An Unsupported Optic Interface Module (OIM) for the specified port has been inserted .

Recommended Action    No action is required.

ETHER Messages

Error Message     
 
    
    
   

%L2-ETHER-3-BDL_IIR_OP_FAILED The basecaps failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the Ether basecaps is out of step with the bundle configuration.

Recommended Action    Restart the ether_caps_partner process in an attempt to recover, or if this fails, detach and re-attach the physical member interface that the error was reported on by unconfiguring and reconfiguring the bundle member id.

Error Message     
 
    
    
   

%L2-ETHER-4-ERR_EVM_EVENT_BLOCK Failure during receipt of message. Error: [chars]

Explanation    A failure occurred handling a message arriving at one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHER-4-INIT Failure during intialisation of [chars] in a Ether basecaps process. Error: [chars]

Explanation    A failure occurred during the initialisation of one of the Ethernet capsulation processes. Under normal circumstances the process restarts with no impact to functionality. If this error message is seen repeatedly then Ethernet services may be affected on all Ether type interfaces on the given node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

ETHERNET Messages

Error Message     
 
    
    
   

%L2-ETHERNET-3-INTERFACE_CREATE Failed to create interface [chars], due to error: [chars]

Explanation    It was not possible to create or initialize the physical interface due to a driver error or a system error. The interface's config may not have been restored and the interface will not be usable.

Recommended Action    Restart the driver process that reported the error. If the error is reported again then reloading the linecard may allow it to recover, but it will impact all traffic on that node. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    Choose a more appropriate MTU to configure on the interface considering the MTU requirements of any L3 protocols that are configured on the interface.

Error Message     
 
    
    
   

%L2-ETHERNET-3-STATE_FSM Port state FSM operation failed [chars] on [chars], due to error: [chars]

Explanation    An operational error occured when handling a port state event in the port state machine, and the internal state may be left in an inconsistent state without user intervention.

Recommended Action    'shutdown' and 'no shutdown' the affected interface, this should allow the state machine to recover its operational state. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-BDL_IIR_OP_FAILED The driver failed to process a bundle IIR [chars] message on [chars], error: [chars]

Explanation    The ethernet driver failed to process a bundle IIR notification message. Further it is not able to propagate the message back to the virtual interface owner, and hence it is possible that the driver is out of step with the bundle configuration.

Recommended Action    Restart the driver process that generated this error message and it will automatically recover. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-4-INITIALIZATION Initialization of the G-Ether library failed, due to error: [chars]

Explanation    A error occurred during the initialization of the common Ethernet driver library.

Recommended Action    The driver process is restarted automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-ETHERNET-6-MTU_NEAR_HW_LIMIT The configured MTU of [unsigned int] on [chars] is close to the H/W limit, and hence large [chars] frames may be dropped as oversized frames

Explanation    The configured MTU is close the maximum frame size allowed on the interface. Hence large 802.1Q or QinQ frames bigger than the maximum frame size supported on the interface may be dropped.

Recommended Action    If 802.1Q or QinQ support is required on the interface, then it is recommended that either the configured interface MTU is reduced by 4 or 8 bytes, or the sub-interface MTU is reduced by 4 or 8 bytes to ensure that all frames are within the H/W limits.

FR_EDM Messages

Error Message     
 
    
    
   

%L2-FR_EDM-2-INIT [chars] : [chars]

Explanation    Init error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_EDM-3-NO_STATS unable to get stats for vc [hex], [dec]

Explanation    The statistics manager returned null data for vc

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_EDM-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_INARP Messages

Error Message     
 
    
    
   

%L2-FR_INARP-2-CONNECT_IM failure on IM connection: [chars]

Explanation    This error indicates a problem with InARP/IM interaction.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-2-INIT failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-IF_VC_CLASS unable to apply class [chars] to interface [chars]: [chars]

Explanation    A vc-class was configured on an interface but couldn't be applied for the given reason

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-INVALID_FD received an event on unknown fd [dec]

Explanation    An event was received with an unknown fd

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-PVC_VC_CLASS unable to apply class [chars] to interface [chars].[dec]: [chars]

Explanation    A vc-class was configured on an interface but couldn't be applied

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-SOCKET_SEND could not send on socket: [chars]

Explanation    Socket returned an error, not EAGAIN or EINTR

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-UNKNOWN_EVENT received an unknown event [hex]

Explanation    An unknown event was received

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-3-UNKNOWN_IDB received information about an unrecognised interface

Explanation    A set of IDBs are kept with information on each InARP interface. Somehow this information has become inconsistent with the system.

Recommended Action    Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-4-UNKNOWN_INTFTYPE received an event for an unknown interface type: [dec]

Explanation    The system sent a messages which wasn't expected. It will be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_INARP-4-UNKNOWN_MSG received an unknown message: [dec]

Explanation    An unknown InARP message was received - it will be ignored

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_LMI Messages

Error Message     
 
    
    
   

%L2-FR_LMI-2-INIT LMI failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-CODEP_ERROR Configured values of [chars] and [chars] conflict during application. Changing [chars] to [dec] to maintain consistency

Explanation    LMI parameters N392 and N393 are co-dependent.They must obey this rule: N392 must be less than or equal to N393. Somehow SysDB is attempting to apply config which conflicts unreconcilably. The parameter being configured is adjusted to be equal to the other.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-ENCAP Unable to process Frame Relay encapsulation request

Explanation    An error occurred processing a request to set Frame Relay encapsulation on an interface. LMI will not be able to control the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-IDB_SEARCH The interface specified by a handle is not one that LMI recognizes as running Frame Relay

Explanation    A call to rt_search failed to return an idb object.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-KEEPALIVES An error occurred informing the VC Manager that LMI is [chars] responsible for the line state of an interface: [chars]

Explanation    An error occurred in the VCM call to set the keepalive state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-LINE_STATE An error occurred informing the VC Manager of the line state: [chars]

Explanation    The VC Manager returned an error after receving a request to set the line state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-MALLOC Memory allocation failed: [chars]

Explanation    A call to malloc failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-RECVFROM An error occurred receiving a packet: [chars]

Explanation    The socket call recvfrom returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SENDTO An error occurred sending a packet: [chars]

Explanation    The socket call sendto returned an error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-SET_DLCI_STATUS An error occurred sending the updated VC states to the VC Manager: [chars]

Explanation    The VC Manager returned an error after receving a request to update VC states.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VC_CREATE Unable to create LMI DLCI [dec]: [chars]

Explanation    LMI was unable to create a VC it needed to function properly.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-3-VCM_VC_STATES LMI was unable to send all VC states to the VC Manager

Explanation    An error occurred sending the VC states to the VC Manager. This could have occurred searching LMI's internal database or in the call to the VCM.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_LMI-6-CODEP_CHANGE Changing defaulted value of [chars] to [dec] due to configured value of [chars]

Explanation    LMI parameters N392 and N393 are co-dependent They must obey this rule: N392 must be less than or equal to N393. Sometimes when one is changed the other must be changed as well to keep the protocol functioning properly.

Recommended Action    None. This is not an error, just a notification.

FR_NETIO Messages

Error Message     
 
    
    
   

%L2-FR_NETIO-3-MEMORY Failed to allocate [unsigned int] bytes

Explanation    The DLL has failed to acquire the required amount of memory.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-FR_NETIO-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

FR_SFRAR Messages

Error Message     
 
    
    
   

%L2-FR_SFRAR-2-INIT SFRAR failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SFRAR-3-SYSMGR SFRAR process ready call failed: [chars]

Explanation    The call to inform the System Manager that SFRAR is running failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_SOCKET Messages

Error Message     
 
    
    
   

%L2-FR_SOCKET-2-INIT Socket failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-CONN Failed to setup fr socket EVM connection: [chars]

Explanation    The fr_socket process failed to connect to the event manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-DPC_FAIL Failed to register [chars] protocol in netio

Explanation    The fr_socket process failed to send dpc message to Netio

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-NETIO_OUTPUT_FAIL Failed to send packet out to Netio: [chars]

Explanation    The fr_socket process failed to send packet out to Netio.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-PACKET_CONN Failure in packet manager connection: [chars]

Explanation    The fr_socket process failed to connect to packet manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-RESMGR_ATTACH Failed to setup fr socket as a resource manager: [chars]

Explanation    The fr_socket process failed to advertise itself to the system as a resource manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-SEND_ASYNC Failed to send async pulse [dec]: [chars]

Explanation    The fr_socket process failed to send async pulse to FR socket EVM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_SOCKET-3-SYSMGR SysMgr process ready call failed: [chars]

Explanation    The call to inform the System Manager that the FR socket is running failed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_UV Messages

Error Message     
 
    
    
   

%L2-FR_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-INIT Failure during intialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Error Message    If the message recurs, copy the error message exactly as it appears on the console or in 
the system log, call your Cisco technical support representative and provide the representative with the 
gathered information.

FR_VCM_EA Messages

Error Message     
 
    
    
   

%L2-FR_VCM_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-AIB_INIT_FAILED Failed during AIB initialization, err: [chars]

Explanation    The FR VCM EA process initialization failed whilst trying to connect to AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM_EA-3-NO_STATS Failed to initialize FR VCM subinterface stats collection, err: [chars]

Explanation    The FR VCM EA subinterface stats collection initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FR_VCM Messages

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONFIG_INIT Configuration registration failed: [chars]

Explanation    Unable to register for configuration changes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-2-CONNS Connection initialization failed: [chars]

Explanation    Unable to initialize connections to one or more servers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-ENCAPS_TYPE Unable to specify [chars] encaps type for interface [chars]: [chars]

Explanation    The configuration in the NetIO DLL could not be updated, the system may continue with the existing encapsulation type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IDB FR [chars] IDB [chars] failed: [chars]

Explanation    Unexpected error on Interface Descriptor Block

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-IM_OP FR [chars] on [chars] failed: [chars]

Explanation    The operation on the named item is not completing successfully when it is expected to, and hence the FR support may be disabled

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-INTF_NOTFOUND FR interface [chars] not found

Explanation    An action has been performed on a FR interface, but FR doesn't have any information about the interface.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-MAIN_IF FR error on main interface [chars]: [chars]

Explanation    Unexpected error on the main interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-PTP_VC FR PVC create (dlci [dec]) on PTP subinterface failed - only one PVC is allowed

Explanation    Point-to-point (PTP) subinterfaces only allow one PVC and an attempt to create a second PVC is being rejected

Recommended Action    Remove the old PVC before creating the replacement, or use a multipoint subinterface instead

Error Message     
 
    
    
   

%L2-FR_VCM-3-SUB_IF FR error on sub-interface [chars]: [chars]

Explanation    Unexpected error on the sub-interface

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-SYSDB_OP FR SysDB [chars] on [chars] failed: [chars]

Explanation    Unexpected failure performing a SysDB operation.

Recommended Action    Check SysDB is still running, and if not restart it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_EXISTS FR VC with DLCI [dec] already exists

Explanation    The DLCI is unique per 'main' interface and this dlci is already used

Recommended Action    None.

Error Message     
 
    
    
   

%L2-FR_VCM-3-VC_NOTFOUND FR VC with DLCI [dec] not found

Explanation    An operation was performed which expected a VC with the specified DLCI to exist, but it doesn't

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-FR_VCM-6-DEBUG_REG Debug registration failed: [chars]

Explanation    Debug message registration failed

Recommended Action    No action is required.

FRMIB Messages

Error Message     
 
    
    
   

%L2-FRMIB-3-SYSDB FR MIB: [chars]: [chars]: [chars]

Explanation    This message indicates the FR MIB library fails to perform a SYSDB operation. *DDTS*

Error Message    If the message recurs, copy the error message exactly as it appears on the console or in 
the system log, call your Cisco technical support representative and provide the representative with the 
gathered information.

Recommended Action   

G709 Messages

Error Message     
 
    
    
   

%L2-G709-4-ALARM [chars]: [chars] [chars]

Explanation    The specified G709 Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

GATM Messages

Error Message     
 
    
    
   

%L2-GATM-2-ERR [chars] - [dec]: [chars]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_HEX [chars] - [dec]: [chars] ([hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_IFH_STS [chars] - [dec]: [chars] ifh=[hex] rc=[hex]

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_INT [chars] - [dec]: [chars] ([dec])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STR [chars] - [dec]: [chars] ([chars])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-GATM-2-ERR_STS [chars] - [dec]: [chars] (rc = [hex])

Explanation    Error in gatm operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

gulf Messages

Error Message     
 
    
    
   

%L2-gulf-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-4-WARNING warning: [chars]: [chars]: [dec]

Explanation    A warning condition is detected in gulf Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-gulf-6-INFO_MSG Info: [chars]: [chars]: [dec]

Explanation    This is a Informational message in the gulf driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-gulf-7-DEBUG_MSG Debug: [chars]: [chars]: [dec]

Explanation    This is a debug message in the gulf driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPCP Messages

Error Message     
 
    
    
   

%L2-IPCP-1-ERR_ADJ_DELETE Failed to remove [chars] from adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-1-ERR_ADJ_UPDATE Failed to add [chars] into adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-1-ERR_RIB_ROUTE_ADD Failed to add route into RIB; [chars]

Explanation    An error was encountered while connecting to the RIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-DEBUG_ASSOC Conditional debug association failed; [chars]

Explanation    An error has occurred upon attempting to associate conditional debugging with PPP debug commands. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-DEBUG_COND_REGISTER Conditional debug registration failed; [chars]

Explanation    An error has occurred upon attempting to register for conditional debugs. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-DEBUG_REGISTER Debug registration failed; [chars]

Explanation    An error has occurred upon attempting to connect to the debug server. This may cause debug messages to not appear.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_CONN Connection [chars] failed for [chars]; [chars]

Explanation    An failure in the reconnection software in the function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_EVENT Failed to [chars] [chars] event; [chars]

Explanation    An event handler has returned an error condition

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_EVENT_MGR_CREATE IPCP Failed to initialize event manager; [chars]

Explanation    Initialization of the event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_IM_STATE Failed to get basecaps state for [chars]; [chars]

Explanation    IPCP was unable to determine the state of the basecaps and has assumed it to be down. IPCP will remain closed until the interface is brought down and up again.

Recommended Action    Shut the interface and then bring it up again.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_IPARM Error [chars] IP-ARM; [chars]

Explanation    IPCP could not perform the operation with IP-ARM that was desired.

Recommended Action    Restart the IPCP and IP-ARM processes. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MBOX_ADD [chars] [chars] failed to add [chars]; [chars]

Explanation    An attribute has failed to be added to the message which was being constructed which has caused the message to be discarded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MBOX_CREATE [chars] failed to create [chars]; [chars]

Explanation    An attempt to allocate a message failed. This may be due to lack of resources.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MBOX_INIT Failed to init [chars] message for [chars]; [chars]

Explanation    The initialization of a message failed, this results in a failure to communicate with the Link Control Protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MBOX_SEND [chars] failed to send [chars]; [chars]

Explanation    A message failed in a send attempt to a particular mailbox.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MQ_CREATE Failed to create message queue to AAA; [chars]

Explanation    IPCP has failed to open its mailbox channel to AAA.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_MQ_OPEN Failed to open message queue [chars]; [chars]

Explanation    IPCP has failed to open a mailbox channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_NETIO_RXQ Failed to support [chars] [chars]; [chars]

Explanation    IPCP has attempted to update the data component with the current status of the control protocol. The attempt has failed which will has the effect of leaving the data component with the previous set of information. This may result in an inability to negotiate IPCP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_SYSDB SysDB [chars] failed; [chars]

Explanation    IPCP cannot perform some SysDB operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_SYSDB_NOTIFICATION Failed to [chars]register for SysDB notification of [chars]; [chars]

Explanation    IPCP cannot (un)register for SysDB notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_SYSDB_VERIFICATION Failed to [chars]register for SysDB verification of [chars]; [chars]

Explanation    IPCP cannot (un)register for SysDB verification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-ERR_TIMER [chars] [chars] timer [chars]

Explanation    The manipulation of a timer had an abnormal side effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-3-LTRACE_INIT IPCP Failed to initialize the ltrace buffer; [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_CHKPT Failed checkpoint [chars]

Explanation    An error has occurred upon attempting to connect to the checkpointing server. This may cause inconsistent state to be present within IPCP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_CHKPT_ITERATE Failed iterating checkpoint store: [chars]

Explanation    An error has occurred while iterating the checkpoint data store after a process restart. The process will exit and hope for a clear run next time. If failure persists its checkpoint store will be deleted and it will do a cold restart which should resolve the problem.

Recommended Action    If multiple restarts does not work then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_EVENT_WAIT Error waiting for event; [chars]

Explanation    The event loop has received a message of a type it does not recognize. All events should be received by handlers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_IM_ENCAPS Error checking base encapsulation for [chars]; [chars]

Explanation    IPCP was unable to check the base encapsulation of an interface with IM. This may result in IPCP not running on the interface if PPP encapsulation was present.

Recommended Action    If the interface that the error is reported for does not have PPP encapsulation then there is no problem. If the interface does have PPP encapsulation then first remove and re-add the IP address or IP unnumbered configuration. If this doesn't get IPCP working then remove and re-add the PPP encapsulation. If IPCP still does not work then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_INTERFACE_NULL [chars]: Interface NULL

Explanation    A function was called with a NULL interface pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_MEMORY Insufficient memory for [chars]

Explanation    IPCP failed to allocate memory for a structure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_MQ_RECEIVE Error receiving from message queue; [chars]

Explanation    IPCP has failed to receive a message from its mailbox.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_NO_INTERFACE Interface [chars] not found

Explanation    A SysDB name lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-4-ERR_NO_INTERFACE_STRUCT Structure for interface [chars] not created; [chars]

Explanation    IPCP failed to create an interface structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPCP-6-ERR_IM_CONNECT Failed to [chars]bind [chars] IM; [chars]

Explanation    IPCP has failed to either bind to or unbind from the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-IPCP-6-ERR_IM_EVENT Failed to [chars] event; [chars]

Explanation    IPCP has failed to either initialize or specify an event with the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-IPCP-6-ERR_IM_PROTO Failed to [chars] [chars] protocol; [chars]

Explanation    IPCP has failed a protocol operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6CP Messages

Error Message     
 
    
    
   

%L2-IPV6CP-1-ERR_ADJ_DELETE Failed to remove [chars] from adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-1-ERR_ADJ_UPDATE Failed to add [chars] into adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-DEBUG_ASSOC Conditional debug association failed; [chars]

Explanation    An error has occurred upon attempting to associate conditional debugging with PPP debug commands. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-DEBUG_COND_REGISTER Conditional debug registration failed; [chars]

Explanation    An error has occurred upon attempting to register for conditional debugs. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-DEBUG_REGISTER Debug registration failed; [chars]

Explanation    An error has occurred upon attempting to connect to the debug server. This may cause debug messages to not appear.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_CONN Connection [chars] failed for [chars]; [chars]

Explanation    An failure in the reconnection software in the function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_EVENT Failed to [chars] [chars] event; [chars]

Explanation    An event handler has returned an error condition

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_EVENT_MGR_CREATE IPV6CP Failed to initialize event manager; [chars]

Explanation    Initialization of the event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_IM_STATE Failed to get basecaps state for [chars]; [chars]

Explanation    IPV6CP was unable to determine the state of the basecaps and has assumed it to be down. IPV6CP will remain closed until the interface is brought down and up again.

Recommended Action    Shut the interface and then bring it up again.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_MBOX_ADD [chars] [chars] failed to add [chars]; [chars]

Explanation    An attribute has failed to be added to the message which was being constructed which has caused the message to be discarded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_MBOX_CREATE [chars] failed to create [chars]; [chars]

Explanation    An attempt to allocate a message failed. This may be due to lack of resources.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_MBOX_INIT Failed to init [chars] message for [chars]; [chars]

Explanation    The initialization of a message failed, this results in a failure to communicate with the Link Control Protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_MBOX_SEND [chars] failed to send [chars]; [chars]

Explanation    A message failed in a send attempt to a particular mailbox.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_MQ_OPEN Failed to open message queue [chars]; [chars]

Explanation    IPV6CP has failed to open a mailbox channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_NETIO_RXQ Failed to support [chars] [chars]; [chars]

Explanation    IPV6CP has attempted to update the data component with the current status of the control protocol. The attempt has failed which will has the effect of leaving the data component with the previous set of information. This may result in an inability to negotiate IPV6CP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_SYSDB SysDB [chars] failed; [chars]

Explanation    IPV6CP cannot perform some SysDB operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_SYSDB_NOTIFICATION Failed to [chars]register for SysDB notification of [chars]; [chars]

Explanation    IPV6CP cannot (un)register for SysDB notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_SYSDB_VERIFICATION Failed to [chars]register for SysDB verification of [chars]; [chars]

Explanation    IPV6CP cannot (un)register for SysDB verification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-ERR_TIMER [chars] [chars] timer [chars]

Explanation    The manipulation of a timer had an abnormal side effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-3-LTRACE_INIT IPV6CP Failed to initialize the ltrace buffer; [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_CHKPT Failed checkpoint [chars]

Explanation    An error has occurred upon attempting to connect to the checkpointing server. This may cause inconsistent state to be present within IPV6CP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_CHKPT_ITERATE Failed iterating checkpoint store: [chars]

Explanation    An error has occurred while iterating the checkpoint data store after a process restart. The process will exit and hope for a clear run next time. If failure persists its checkpoint store will be deleted and it will do a cold restart which should resolve the problem.

Recommended Action    If multiple restarts does not work then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_EVENT_WAIT Error waiting for event; [chars]

Explanation    The event loop has received a message of a type it does not recognize. All events should be received by handlers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_INTERFACE_NULL [chars]: Interface NULL

Explanation    A function was called with a NULL interface pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_MEMORY Insufficient memory for [chars]

Explanation    IPV6CP failed to allocate memory for a structure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_MQ_RECEIVE Error receiving from message queue; [chars]

Explanation    IPV6CP has failed to receive a message from its mailbox.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_NO_INTERFACE Interface [chars] not found

Explanation    A SysDB name lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-4-ERR_NO_INTERFACE_STRUCT Structure for interface [chars] not created; [chars]

Explanation    IPV6CP failed to create an interface structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-6-ERR_IM_CONNECT Failed to [chars]bind [chars] IM; [chars]

Explanation    IPV6CP has failed to either bind to or unbind from the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-IPV6CP-6-ERR_IM_ENCAPS Failed to [chars] [chars] encapsulation; [chars]

Explanation    IPV6CP has failed an encapsulation operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-IPV6CP-6-ERR_IM_EVENT Failed to [chars] event; [chars]

Explanation    IPV6CP has failed to either initialize or specify an event with the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-IPV6CP-6-ERR_IM_PROTO Failed to [chars] [chars] protocol; [chars]

Explanation    IPV6CP has failed a protocol operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

JDAM Messages

Error Message     
 
    
    
   

%L2-JDAM-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in JDAM Driver which involves exiting the PLIM process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-JDAM-6-INFO_MSG [chars] [chars] [dec]

Explanation    This is a Informational message in the JDAM driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-JDAM-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the JDAM driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2C Messages

Error Message     
 
    
    
   

%l2vpn-L2C-3-ERR_MISCONFIG Misconfiguration: Item [chars] on interface [chars] is incompatible with other configuration. The system may now be in an inconsistant state.

Explanation    The L2VPN Uberverifier has detected a misconfiguration. It was not detected in the verification phase, so the Uberverifier cannot correct this.

Recommended Action    The misconfiguration can be corrected by deleting all configuration from the specified interface and its subinterfaces, and then reapplying the configuration. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%l2vpn-L2C-4-WARN_EVENT Event loop error: [chars]

Explanation    The L2VPN Uberverifier has encountered a problem in its event loop and cannot continue. In this situation it should restart.

Recommended Action    The L2VPN Uberverifier should recover on restart. If the problem persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%l2vpn-L2C-4-WARN_INIT Failed to initialize [chars]: [chars]

Explanation    The L2VPN Uberverifier process failed to initialize correctly. In this situation it restarts, but may not recover if there is a persistant error in the IOS-XR system and the L2VPN Uberverifier is later unable to reestablish its connections and initialize successfully.

Recommended Action    The Uberverifier is not essential for system operation. However, if it is not running as intended, it may be possible for a misconfiguration to be allowed. If this persists, do the following: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2FIB_DEBUG-3-ERR [chars]: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB_LIB Messages

Error Message     
 
    
    
   

%L2-L2FIB_LIB-2-OOR L2FIB has run out of [chars] resource memory. No more updates will be handled by the L2FIB. Please delete ACs to resume normal operation on this node

Explanation    The l2fib_mgr process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes are deleted.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Significant ACs will have to be deleted on the affected node to resume normal l2fib operation.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-2-SHM_INIT L2FIB shared memory initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-MEM_ERR [chars] failed :[chars]

Explanation    Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_LIB-4-RSRC_LOW L2FIB running low on [chars] resource memory. L2FIB will now begin resource constrained forwarding. Only route deletes will be handled in this state, which may result in mismatch between L2VPN mgr/AIB/L2FIB and L2FIB. Traffic loss on certain ACs can be expected. The L2FIB will automatically resume normal operation, once the resource utilization returns to normal level

Explanation    The l2fib_mgr process has detected that average utilization for specified resource has risen above a predefined high watermark value, and has entered resource contrained forwarding mode. In this mode, the l2fib will only handle route deletes which may potentially freeup some memory. Due to this operational mode, the L2VPN mgr/AIB/L2FIB and L2FIB will be out of sync. Once ACs are deleted and resource utilization level drops to acceptable levels again, l2fib will come out of this operational mode and resume normal operation.

Recommended Action    Run show l2vpn forwarding resource command and check which resource(s) are running low on memory. Any action that reduces number of ACs will eventually result in the l2fib returning to normal operation after few seconds.

L2FIB_SHM Messages

Error Message     
 
    
    
   

%L2-L2FIB_SHM-2-DEBUG L2FIB debug init failed: [chars] ([chars])

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_SHM-2-INIT L2FIB initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB_SHM-3-ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2FIB Messages

Error Message     
 
    
    
   

%L2-L2FIB-2-INIT L2FIB initialization failure: [chars] [chars]

Explanation    L2FIB initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-INVALID_MSG L2FIB thread [chars] received an invalid message: [chars] [unsigned int]

Explanation    L2FIB thread got an invalid message so it is exiting

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-2-SHM_INIT L2FIB shared memory initialization failed: [chars]

Explanation    Initialization of L2FIB failed. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-ADJ_INIT FIB initialization with the AIB failed [chars]: [chars]

Explanation    An internal software error occurred that prevented the L2FIB from working with AIB.

Recommended Action    Try restarting the l2fib process to see if the route gets programmed again. LC OIR can be tried as well.

Error Message     
 
    
    
   

%L2-L2FIB-3-MEM_ERR [chars] failed :[chars]

Explanation    Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-PAK_ERR [chars] failed: [chars]

Explanation    Some error occurred in Packet (IP/MPLS/ICMP) related operations. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-SHM_ERR [chars] failed: [chars]

Explanation    Some error occurred in operations related to Shared Memory area. The text of the message displays the failed operation and the related error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-TIMER_ERR [chars] failed for '[chars]': [chars]

Explanation    Some error occurred in Managed Timer related operations. The text of the message displays the failed operation and the related timer construct with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-WAVL_ERR [chars] failed (tree=[chars])

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-3-WAVL_ERR_RC [chars] failed (tree=[chars]): [chars]

Explanation    Some error occurred in WAVL operations The text of the message displays the failed operation and the related wavl tree with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2FIB-6-GEN_INFO_CERR [chars]: [chars]

Explanation    An internal software error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_DEBUG Messages

Error Message     
 
    
    
   

%L2-L2VPN_DEBUG-3-ERR [chars]: [chars]

Explanation    Debug and ltrace library initialization failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

L2VPN_PW Messages

Error Message     
 
    
    
   

%L2-L2VPN_PW-3-UPDOWN Pseudowire with address [chars], id [unsigned long int], changed state to [chars]

Explanation    The L2VPN Pseudowire went up or down

Recommended Action    If the state change was unexpected, confirm the configuration settings for the cross-connect.

L2VPN Messages

Error Message     
 
    
    
   

%L2-L2VPN-2-CRIT_MEM_SHUT [chars] process shutting down due to 'Critical' memory state.

Explanation    The system has notified a process that it is critically short of memory and the process is shutting down.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-2-NO_MEM No memory for '[chars]'

Explanation    The requested operation could not be accomplished because of a low memory condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-BAG_REG_ERR bag(s) registration failed: [chars]

Explanation    Some error occured while trying to register edm bags. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-EVENT_ERR [chars] failed: [chars]

Explanation    Some error occured in event/event manager/event connection operations. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-GEN_ERR [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_BIND_ERR sysdb_bind failed for '[chars]': [chars]

Explanation    Some error occured in sysdb bind operation bind. The text of the message displays the failed operation for the bindpoint with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-3-SYSDB_ERR [chars] failed: [chars]

Explanation    Some error occured in sysdb operation. The text of the message displays the failed operation with error code. The traceback can be used to get the function/line number of error generating code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-L2VPN-6-GEN_INFO [chars]

Explanation    Some information for process status.

Error Message    Copy the error message exactly as it appears on the console or in the system log, call your 
Cisco technical support representative and provide the representative with the gathered information.

LINK Messages

Error Message     
 
    
    
   

%L2-LINK-4-BERTSTATUS [chars] [chars]

Explanation    The bert status of the link

Recommended Action    None.

MAC_ACCOUNT Messages

Error Message     
 
    
    
   

%L2-MAC_ACCOUNT-4-OOR_WARNING Resource limit hit for MAC accounting entries on this port: [chars]

Explanation    The resource limit for MAC accounting entries on this port has been reached, no more MAC accounting entries will be accounted for. This error message is displayed when one or more MAC accounting entries fails to be added as a result of this out of resource condition.

Recommended Action    Clear the ARP cache for this interface/node to remove stale entries and repopulate MAC accounting. Use the MAC accounting show command to identify the number of available accounting entries on the port.

MARVEL Messages

Error Message     
 
    
    
   

%L2-MARVEL-3-CHAN_CREATE Failed to create channel : [chars]

Explanation    Failed to create marvel-test (driver) channel using event_manager_create.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_INIT Debug initialization failed

Explanation    Initialization of the debug event failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-DEBUG_REG Debug registration failed : [chars]

Explanation    debug_register() call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-EVENT_MGR_FAIL [chars] : [chars]

Explanation    Generic failure of any event manager API.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MMAP Failed to map device address : [chars]

Explanation    mmap() system call failed to map the device physical address.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-MSG_REPLY Failed to send reply message : [chars]

Explanation    This error is reported when msg_reply() (LWM call) fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-NOMEM Failed to allocate memory

Explanation    This error is reported when malloc()/calloc() type system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-3-OPEN Failed to open file [chars] : [chars]

Explanation    This error is generated when the open() system call fails.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MARVEL-6-RX_ASYNC_MSG Invalid asynchronous message received.

Explanation    This error is generated when an invalid asynchronous message is received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MLCTRLR Messages

Error Message     
 
    
    
   

%L2-MLCTRLR-2-NOMEM [chars]([dec]): not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

Error Message     
 
    
    
   

%L2-MLCTRLR-3-ERROR [chars]([dec]): [chars] failed ([chars]) - [chars]

Explanation    A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-ALARM [chars]: [chars] [chars]

Explanation    The specified MLCTRLR Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-FEAC [chars] [chars]

Explanation    New Far End Alarm Code received.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-LOOPSTATUS [chars] [chars]

Explanation    A configurable controller loopback status.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-UPDOWN [chars]: [chars] [chars]

Explanation    The specified MLCTRLR is operationally down due to alarm. Check alarm status using show controller Mlt command on the cli.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-MLCTRLR-4-WARNING [chars]([dec]): [chars] - [chars]

Explanation    A non-fatal error occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of MLCTRLR.

MPLSCP Messages

Error Message     
 
    
    
   

%L2-MPLSCP-1-ERR_ADJ_DELETE Failed to remove [chars] from adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-1-ERR_ADJ_UPDATE Failed to add [chars] into adjacency; [chars]

Explanation    An error was encountered while connecting to the AIB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-DEBUG_ASSOC Conditional debug association failed; [chars]

Explanation    An error has occurred upon attempting to associate conditional debugging with PPP debug commands. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-DEBUG_COND_REGISTER Conditional debug registration failed; [chars]

Explanation    An error has occurred upon attempting to register for conditional debugs. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-DEBUG_REGISTER Debug registration failed; [chars]

Explanation    An error has occurred upon attempting to connect to the debug server. This may cause debug messages to not appear.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_CONN Connection [chars] failed for [chars]; [chars]

Explanation    An failure in the reconnection software in the function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_EVENT Failed to [chars] [chars] event; [chars]

Explanation    An event handler has returned an error condition

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_EVENT_MGR_CREATE MPLSCP Failed to initialize event manager; [chars]

Explanation    Initialization of the event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_IM_STATE Failed to get basecaps state for [chars]; [chars]

Explanation    MPLSCP was unable to determine the state of the basecaps and has assumed it to be down. MPLSCP will remain closed until the interface is brought down and up again.

Recommended Action    Shut the interface and then bring it up again.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_MBOX_ADD [chars] [chars] failed to add [chars]; [chars]

Explanation    An attribute has failed to be added to the message which was being constructed which has caused the message to be discarded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_MBOX_CREATE [chars] failed to create [chars]; [chars]

Explanation    An attempt to allocate a message failed. This may be due to lack of resources.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_MBOX_INIT Failed to init [chars] message for [chars]; [chars]

Explanation    The initialization of a message failed, this results in a failure to communicate with the Link Control Protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_MBOX_SEND [chars] failed to send [chars]; [chars]

Explanation    A message failed in a send attempt to a particular mailbox.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_MQ_OPEN Failed to open message queue [chars]; [chars]

Explanation    MPLSCP has failed to open a mailbox channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_NETIO_RXQ Failed to support [chars] [chars]; [chars]

Explanation    MPLSCP has attempted to update the data component with the current status of the control protocol. The attempt has failed which will has the effect of leaving the data component with the previous set of information. This may result in an inability to negotiate MPLSCP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_SYSDB SysDB [chars] failed; [chars]

Explanation    MPLSCP cannot perform some SysDB operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_SYSDB_NOTIFICATION Failed to [chars]register for SysDB notification of [chars]; [chars]

Explanation    MPLSCP cannot (un)register for SysDB notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-ERR_TIMER [chars] [chars] timer [chars]

Explanation    The manipulation of a timer had an abnormal side effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-3-LTRACE_INIT MPLSCP Failed to initialize the ltrace buffer; [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_EVENT_WAIT Error waiting for event; [chars]

Explanation    The event loop has received a message of a type it does not recognize. All events should be received by handlers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_INTERFACE_NULL [chars]: Interface NULL

Explanation    A function was called with a NULL interface pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_MEMORY Insufficient memory for [chars]

Explanation    MPSLCP failed to allocate memory for a structure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_MQ_RECEIVE Error receiving from message queue; [chars]

Explanation    MPLSCP has failed to receive a message from its mailbox.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_NO_INTERFACE Interface [chars] not found

Explanation    A SysDB name lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-4-ERR_NO_INTERFACE_STRUCT Structure for interface [chars] not created; [chars]

Explanation    MPLSCP failed to create an interface structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-6-ERR_IM_CONNECT Failed to [chars]bind [chars] IM; [chars]

Explanation    MPLSCP has failed to either bind to or unbind from the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-MPLSCP-6-ERR_IM_ENCAPS Failed to [chars] [chars] encapsulation; [chars]

Explanation    MPLSCP has failed an encapsulation operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MPLSCP-6-ERR_IM_EVENT Failed to [chars] event; [chars]

Explanation    MPLSCP has failed to either initialize or specify an event with the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-MPLSCP-6-ERR_IM_PROTO Failed to [chars] [chars] protocol; [chars]

Explanation    MPLSCP has failed a protocol operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MULTILINK_UV Messages

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-EVENT Unrecoverable error in event loop. Error: [chars]

Explanation    An error (other than EINTR) occured in the event loop. The process must exit.

Recommended Action    Identify the location of the card where there error was reported. Copy the error message exactly as it appears on the console or in the system log. Issue the show memory location summary command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show memory location summary output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-INIT Failure during initialization of [chars]. Error: [chars]

Explanation    A failure occurred during the initialization of the process. This resulted in the restart of the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-MULTILINK_UV-3-SYSMGR Failure communicating readiness to System Manager. Error: [chars]

Explanation    The process was initialized successfully but was unable to inform System Manager of the success.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Multilink Messages

Error Message     
 
    
    
   

%L2-Multilink-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-Multilink-4-ALARM [chars]: [chars] [chars]

Explanation    The specified Multilink Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

ND Messages

Error Message     
 
    
    
   

%L2-ND-3-INIT Process initialisation failed. [chars]: [chars] ([hex])

Explanation    There was a software error during process startup.

Recommended Action    The process will restart and try to recover. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise, check whether the error code contained in the message indicates that there was a failure to allocate the necessary memory and take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If resource allocation was not the problem and it hasn't been fixed by a subsequent restart, then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the process does not restart automatically, restart it manually. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

OSICP Messages

Error Message     
 
    
    
   

%L2-OSICP-3-DEBUG_ASSOC Conditional debug association failed; [chars]

Explanation    An error has occurred upon attempting to associate conditional debugging with PPP debug commands. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-DEBUG_COND_REGISTER Conditional debug registration failed; [chars]

Explanation    An error has occurred upon attempting to register for conditional debugs. PPP debug messages will not be filtered by debug conditions such as 'debug condition interface'.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-DEBUG_REGISTER Debug registration failed; [chars]

Explanation    An error has occurred upon attempting to connect to the debug server. This may cause debug messages to not appear.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_CONN Connection [chars] failed for [chars]; [chars]

Explanation    An failure in the reconnection software in the function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_EVENT Failed to [chars] [chars] event; [chars]

Explanation    An event handler has returned an error condition

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_EVENT_MGR_CREATE OSICP Failed to initialize event manager; [chars]

Explanation    Initialization of the event manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_IM_STATE Failed to get basecaps state for [chars]; [chars]

Explanation    OSICP was unable to determine the state of the basecaps and has assumed it to be down. OSICP will remain closed until the interface is brought down and up again.

Recommended Action    Shut the interface and then bring it up again.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_MBOX_ADD [chars] [chars] failed to add [chars]; [chars]

Explanation    An attribute has failed to be added to the message which was being constructed which has caused the message to be discarded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_MBOX_CREATE [chars] failed to create [chars]; [chars]

Explanation    An attempt to allocate a message failed. This may be due to lack of resources.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_MBOX_INIT Failed to init [chars] message for [chars]; [chars]

Explanation    The initialization of a message failed, this results in a failure to communicate with the Link Control Protocol.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_MBOX_SEND [chars] failed to send [chars]; [chars]

Explanation    A message failed in a send attempt to a particular mailbox.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_MQ_OPEN Failed to open message queue [chars]; [chars]

Explanation    OSICP has failed to open a mailbox channel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_NETIO_RXQ Failed to support [chars] [chars]; [chars]

Explanation    OSICP has attempted to update the data component with the current status of the control protocol. The attempt has failed which will has the effect of leaving the data component with the previous set of information. This may result in an inability to negotiate OSICP.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_SYSDB SysDB [chars] failed; [chars]

Explanation    OSICP cannot perform some SysDB operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_SYSDB_NOTIFICATION Failed to [chars]register for SysDB notification of [chars]; [chars]

Explanation    OSICP cannot (un)register for SysDB notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-ERR_TIMER [chars] [chars] timer [chars]

Explanation    The manipulation of a timer had an abnormal side effect.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-3-LTRACE_INIT OSICP Failed to initialize the ltrace buffer; [chars]

Explanation    The buffer used for tracing could not be allocated. The process will be restarted.

Recommended Action    The most likely cause of a problem is not enough memory. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_EVENT_WAIT Error waiting for event; [chars]

Explanation    The event loop has received a message of a type it does not recognize. All events should be received by handlers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_INTERFACE_NULL [chars]: Interface NULL

Explanation    A function was called with a NULL interface pointer.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_MEMORY Insufficient memory for [chars]

Explanation    OSICP failed to allocate memory for a structure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_MQ_RECEIVE Error receiving from message queue; [chars]

Explanation    OSICP has failed to receive a message from its mailbox.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_NO_INTERFACE Interface [chars] not found

Explanation    A SysDB name lookup failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-4-ERR_NO_INTERFACE_STRUCT Structure for interface [chars] not created; [chars]

Explanation    OSICP failed to create an interface structure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-6-ERR_IM_CONNECT Failed to [chars]bind [chars] IM; [chars]

Explanation    OSICP has failed to either bind to or unbind from the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OSICP-6-ERR_IM_ENCAPS Failed to [chars] [chars] encapsulation; [chars]

Explanation    OSICP has failed an encapsulation operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-OSICP-6-ERR_IM_EVENT Failed to [chars] event; [chars]

Explanation    OSICP has failed to either initialize or specify an event with the interface manager server.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-OSICP-6-ERR_IM_PROTO Failed to [chars] [chars] protocol; [chars]

Explanation    OSICP has failed a protocol operation with the interface manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

pm5315 Messages

Error Message     
 
    
    
   

%L2-pm5315-3-FATAL_ERROR Fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in karachi Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-pm5315-6-INFO_MSG Info: [chars]: [chars]

Explanation    This is a Informational message in the karachi driver to indicate an operation.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-pm5315-7-DEBUG_MSG Debug: [chars]: [chars] errno [dec]

Explanation    This is a debug message in the karachi driver to indicate anomolies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temperory situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

pm5316 Messages

Error Message     
 
    
    
   

%L2-pm5316-3-FATAL_ERROR [chars](): fatal error: [chars]: [chars]: [dec]

Explanation    A fatal error occurred in plim Driver which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-pm5316-4-WARNING [chars](): warning: [chars]: [chars]: [dec]

Explanation    A warning condition occurred in plim Driver which involves exiting the process.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

POS Messages

Error Message     
 
    
    
   

%L2-POS-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

PPP_EA Messages

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_EVM_EVENT_BLOCK Error encountered in the event loop: [chars]. The PPP EA process will restart

Explanation    An error occured in the event loop. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPP_EA-4-ERR_INIT Failure during initialization of the [chars]. Error [chars]. The PPP EA process will restart

Explanation    A failure occured during the initialization of the process. The process will restart which should recover the situation.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%L2-PPP_EA-6-ERR_IMP_MULTIPLE_NTFCNS : Multiple [chars] notifications received in a single batch from improxy

Explanation    A batch from IMProxy contained multiple notifications for a single interface. This should not occur but the situation has been recovered successfully by the PPP EA. No problems should be seen as a result.

Recommended Action    *NONE*

PPP_FSM Messages

Error Message     
 
    
    
   

%L2-PPP_FSM-3-ERR_SOCKET [chars]: Socket [chars] failed; [chars]

Explanation    There is a communication problem with the PPP socket.

Recommended Action    Restart the ppp_socket process on the node where the error is reported. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_LCP Messages

Error Message     
 
    
    
   

%L2-PPP_LCP-3-MTU_UNUSABLE [chars] has an interface MTU of [unsigned int] which is smaller than the PPP packet header size ([unsigned int]) and so PPP cannot run on the interface

Explanation    PPP has been informed that the interface MTU has been set to a value smaller than the PPP header size, which makes it impossible for PPP to operate.

Recommended Action    Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-MISSING_AUTHENTICATION_LIST AAA authentication list [chars] is not defined for PPP

Explanation    One or more PPP interfaces have been configured to authenticate the peer using the authentication list identified in the error message, but this authentication list has not been configured in AAA itself. As a result PPP will be unable to authenticate the peer and the line protocol on the relevant interface or interfaces will not come up.

Recommended Action    Configure 'aaa authentication ppp ...'

Error Message     
 
    
    
   

%L2-PPP_LCP-4-MTU_WARNING [chars] has a PPP MTU of [unsigned int] which is smaller than the minimum value ([unsigned int]) required for correct operation

Explanation    RFC 1661 requires that the media that PPP is running over is always able to receive PPP packets of sizes up to 1500 bytes (where this value excludes the 4 bytes of PPP header). This is to ensure that the peer can always send control protocol packets up to this size if they ever need to renegotiate. IOS-XR routers set their MRU to the same value as the MTU, and this message has been issued because the configured MTU is too small to meet the above condition.

Recommended Action    Reconfigure the interface's MTU to a larger value. In order to ensure correct operation with peers, values which provide a layer 2 payload capacity (after allowing for 4 bytes of PPP header) of 1500 bytes or greater are required. Note that as most Control Protocol packets are much smaller than 1500 bytes, it is unlikely that MTU values which are smaller than 1500 bytes will actually cause problems, but this cannot be guaranteed.

Error Message     
 
    
    
   

%L2-PPP_LCP-4-UNRECOGNIZED_PROTO Unrecognized IfMgr protocol [chars] on [chars] (caps=[chars])

Explanation    Interface Manager notified LCP about a protocol that it doesn't recognize, either by sending a request to LCP to adopt this node or by informing LCP that it exists. This is a programming error as LCP needs to recognized all of the protocols which run above it in order to be able to run the relevant CP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_LCP-5-MTU_NEGOTIATED The PPP MTU for [chars] has been negotiated to be [unsigned int]. This is less than the configured PPP MTU of [unsigned int]

Explanation    The PPP MTU is reduced when the PPP MRU of the peer is less than the PPP MTU derived from the locally configured interface MTU. The reduced value will be used until LCP is renegotated (such as when the interface goes down and comes back up, or a new MTU is configured), or if the PPP encapsulation is removed from the interface. The MTU then returns to the configured value and another message will indicate if a value less than the configured value is negotiated again. The reduced MTU is a normal part of PPP operation and is not indicative of any problems.

Recommended Action    No action is required.

PPP_lite Messages

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_PL_DLL_ASYNC_SEND_FAIL Send async pulse to ppp lite process fails; Error [chars]

Explanation    Attempt to send pulse to PPP lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_PL_DLL_CHAN_CONNECT_FAIL Cannot connect to ppp lite process; Error [chars]

Explanation    Attempt to connect to PPP lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-PPP_lite-3-ERR_SHMEM_UNAVAILABLE PPP lite SHMEM can accommodate only [dec] records (request for [dec] records)

Explanation    PPP MA has requested transfer of more interface records than shared memory can accommodate

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

PPP_MA Messages

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AAA Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the AAA service. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary problem communicating with the AAA server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_AIB Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with the AIB server. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the NetIO server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_BAG Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the Bag Client library. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error. The error will affect PPP MA's ability to provide operational management data, but won't otherwise affect PPP MA's operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the Checkpoint Service. The error message describes what operation has failed and why it failed. The most likely reason for this a low memory condition but the error could also be caused by a programming error.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT_CORRUPT Corrupt [chars] checkpoint record found: [chars]

Explanation    Whilst restoring one of its checkpoint tables PPP MA found a corrupt checkpoint entry. The entry will be ignored and so the relevant interface's PPP session will be renegotiated after the restart and as a result there may be a short period where traffic is lost.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CHKPT_DUPLICATE Duplicate [chars] checkpoint record found for [chars]

Explanation    Whilst restoring one of its checkpoint tables PPP MA found multiple entries for the same interface. PPP MA will use the first checkpoint entry it finds for each interface and ignore any subsequent duplicates. This is caused by a programming error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_CLOCK Unexpected error encountered whilst retrieving the value of the [chars] clock: [chars]

Explanation    PPP MA encountered an error whilst retrieving the value of the realtime clock. The error message includes details of the reason for the error. This is a fatal error and the PPP MA process will abort and be restarted to recover.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_DEBUG Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the debug service. The error message describes what operation has failed and why it failed. The error could be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_CLOSE Error closing '[chars]' connection: [chars]

Explanation    PPP MA failed to close a connection to an essential service. This is an internal error and it requires a restart of the process for recovery.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_CREATE Error creating '[chars]' connection: [chars]

Explanation    PPP MA failed to create a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]

Explanation    After detecting an error with the connection to the specified service, PPP MA failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_EVM_HANDLER Error registering for data events on '[chars]' connection: [chars]

Explanation    During initialization, PPP MA failed to register for input or output notifications for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_GET_FD Error retrieving the Connection ID from the '[chars]' connection: [chars]

Explanation    PPP MA failed to retrieve the file descriptor associated with the specified service. This is an internal error.

Recommended Action    Consider restarting the PPP MA process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_NOTIFY Error registering for critical events on '[chars]' connection: [chars]

Explanation    During initialization, PPP MA failed to register for essential notifications regarding the state of the connection for the specified service. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVC_OPEN Error opening '[chars]' connection: [chars]

Explanation    PPP MA failed to open a connection to an essential service during initialization. This is an internal error. It requires a restart of the process for recovery.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_ATTACH Failed to register a handler for '[chars]' messages: [chars]

Explanation    PPP MA failed to register a handler for the specified class of event. This is an initialization error and implies that PPP MA will not be able to operate correctly. The PPP MA process will abort and be restarted in an attempt to recover. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the PPP MA process. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_CREATE Error creating the PPP MA Event Manager: [chars]

Explanation    PPP MA failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *SUPPORT*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_EVM_SEND Failed to send '[chars]': [chars]

Explanation    PPP MA failed to send the specified message. The cause may be a resource starvation problem but is most likely to be an internal programming error. The error message should give more details.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Restart the affected PPP MA process. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IMC Unexpected IfMgr error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error communicating with Interface Manager. The error message describes what operation has failed and why it failed. The most likely reason for this is a temporary connection problem with the Interface Manager Control Server, but the error could also be caused by low memory resource or programming error.

Recommended Action    In many cases, PPP MA will recover by itself. If it does not then restarting the process may help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_IP_ARM Failed to [chars] [chars]: [chars]

Explanation    IPCP encountered an error using the IP-ARM API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.

Recommended Action    Restart the local ipv4_ma process and/or the ppp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_LAS Failed to [chars] [chars]: [chars]

Explanation    IPV6CP encountered an error using the LAS API. The error message describes what operation failed. This may be a resource starvation problem or an internal programming error.

Recommended Action    Restart the local ipv6_ma process and/or the ppp_ma process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_LTRACE Unexpected error encountered whilst [chars] the [chars] buffer: [chars]

Explanation    PPP MA encountered an error using the Lightweight Tracing service. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'

Explanation    The process failed to allocate memory for the specified resource.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_MGD_TIMER Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an unexpected error using the Managed Timer library. This is most likely to be due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. Consider restarting the PPP MA process. *RECUR*.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_PAK Error handling pakman corruption problem: [chars]. Process exiting.

Explanation    The connection to packet manager was errored and the attempt to recover failed. Restarting the process should resolve the problem.

Recommended Action    Restart the ppp_ma process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSDB Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error using the SysDB service. The error message describes what operation has failed and why it failed. The most likely reason for this is a connection problem with the SysDB server, but the error could also be caused by low memory resources or programming error.

Recommended Action    Consider restarting the PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSMGR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. This is a fatal error and the PPP MA process will abort and be restarted to recover.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_SYSMGR_MDR Unexpected error encountered whilst [chars]: [chars]

Explanation    PPP MA encountered an error whilst communicating with SysMgr. The error message describes what operation has failed and why it failed. Sysmgr will take action to recover if appropriate. It is possible that this error has occured after MDR. If so then the recovery may require a cold reload of the card

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-4-ERR_WAVL_INIT Error initializing the WAVL tree used to store PPP MA IDBs: [chars].

Explanation    PPP MA encountered an unexpected error which prevents it from functioning. This error may be caused by low memory resources. The process will abort and be restarted in an attempt to recover.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*

Error Message     
 
    
    
   

%L2-PPP_MA-6-ERR_EVC_DESTROY Error destroying '[chars]' connection: [chars]

Explanation    During process termination PPP MA failed to destroy a connection to a service provided by another process. This is an internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-PPP_MA-6-ERR_EVM_EVENT_BLOCK Error blocking waiting for an event to process: [chars]

Explanation    This is an unexpected error. The PPP MA process may recover by itself, or it may need to be restarted to recover.

Recommended Action    Restart the affected PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Serial Messages

Error Message     
 
    
    
   

%L2-Serial-3-MTU_IMPOSE_FAILED Failed to set MTU of [unsigned int] on [chars]

Explanation    The specified MTU could not be applied on this interface.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-Serial-4-ALARM [chars]: [chars] [chars]

Explanation    The specified Serial Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

SLARP_EA Messages

Error Message     
 
    
    
   

%L2-SLARP_EA-2-EVENT_BLOCK Failure during receipt of message. Error: [chars]

Explanation    A failure occurred handling a message arriving at the SLARP capsulation EA process

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP_EA-2-INIT Failure during intialisation of SLARP Caps EA. Error: [chars]

Explanation    A failure occurred during the initialisation of the SLARP capsulation EA process

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP_EA-3-ADJ_UPDATE_FAIL [hex]: unable to update adjacency : [chars]

Explanation    Adjacency information was not able to be updated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SLARP Messages

Error Message     
 
    
    
   

%L2-SLARP-1-CAPS_ADD [chars]: Could not add slarp capsulation : [chars]

Explanation    Could not add the slarp capsulation in IM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-CAPS_REMOVE [chars]: Could not remove slarp capsulation : [chars]

Explanation    Could not remove the capsulation in question.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-CLOCK_READ_ERROR Unable to read the clock: [chars]

Explanation    Unable to read the clock.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-CONN_ALLOC Failed to allocate event connection with [chars].

Explanation    An attempt to allocate a connection resource failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-CONN_NOTIFY Failed to attach event connection handler for [chars].

Explanation    An attempt to attach a handler for an event connection failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-DEBUG_REGISTER Could not register for debug events : [chars]

Explanation    An attempt ot register with the debug infrastructure failed. The failure cannot be handled, so the process will have exited and will be automatically restarted.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-EVENT_CONN Unable to initialize slarp timers

Explanation    Can not initialize the even channel used by slarp timers.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-EVENTBLOCK event_block returned early : [chars]

Explanation    An unexpected or erroneous return while waiting for events.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-IM_STATEQUERY Failed to query IM interface state: [chars]

Explanation    An attempt to query the interface state from IM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-INVTIMER invalid timer [dec]

Explanation    An error occurred attempting to transmit a SLARP packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-NO_INITIAL_CONFIG Failed to get the initial configuration: [chars]

Explanation    The initial configuration of the box was unable to be determined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-NOIDB [chars]: Event which we do not have record of

Explanation    An internal software error occurred.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-NORESOURCE [chars] failed to allocate resource in [chars]

Explanation    An attempt to allocate a resource failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-TIMER_ALLOC [chars]: Could not allocate a timer for SLARP : [chars]

Explanation    Could not allocate a timer. SLARP will not run on this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-TRACE_REGISTER Failed to register with tracing infrastructure: [chars]

Explanation    An attempt to register with the tracing infrastrucure failed. The failure cannot be handled, so the process will have exited and will be automatically restarted. The root cause of the problem is likely to be with the tracing infrastructure, rather than with this process in particular.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-1-TREE_INSERT [chars]: Could not insert interface into storage.

Explanation    We could not store information about this interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-5-OLDSEQ [chars]: Outdated sequence number [dec], current [dec]

Explanation    A keepalive packet was received out of sequence with previous keepalives.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SLARP-5-PKTLENGTH Invalid packet length [dec] recv on [chars], should be [dec]

Explanation    An invalid SLARP packet was received.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SLARP_Lite Messages

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_CSL_DLL_ASYNC_SEND_FAIL Send async pulse to slarp lite process fails; Error [chars]

Explanation    Attempt to send pulse to SLARP lite process fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_CSL_DLL_CHAN_CONNECT_FAIL Cannot connect to slarp lite process; Error [chars]

Explanation    Attempt to connect to slarp lite process channel fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]

Explanation    Attempt to mmap the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]

Explanation    Attempt to open the shared memory fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]

Explanation    Attempt to truncate the shared memory file fails

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2 control-SLARP_Lite-3-ERR_SHMEM_UNAVAILABLE SLARP lite SHMEM can accommodate only [dec] records (request for [dec] records)

Explanation    cHDLC MA has requested transfer of more interface records than shared memory can

Recommended Action    accommodate

Error Message    Copy the error message exactly as it appears on the console or in the system log. Issue the 
show tech-support command to gather data that may provide information to determine the nature of the 
error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative 
with the gathered information.

SONET_APS Messages

Error Message     
 
    
    
   

%L2-SONET_APS-4-WARNING [chars] - [chars]

Explanation    A non-fatal error occured while executing the function in question. The message contains info about the cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of SONET APS.

Error Message     
 
    
    
   

%L2-SONET_APS-4-WP_INFO Connection to [chars]%s [chars]

Explanation    State change in the APS group internal communication system detected. Expected during transitory conditions at config changes, OIR, etc. The message contains info about the WP communication components affected.

Recommended Action    Verify continued correct operation of SONET APS.

Error Message     
 
    
    
   

%L2-SONET_APS-6-CONFLICT [chars] ([chars]) - [chars]

Explanation    A conflict failure occured The message contains info about the cause of the failure and possibly anticipated actions/effects.

Recommended Action    Fix the confguration error for proper operation of SONET APS.

Error Message     
 
    
    
   

%L2-SONET_APS-6-CONTACT [chars] [chars] [dec] [chars] [dec] [chars]

Explanation    Debug messages for APS.

Recommended Action    No Action requirements.

Error Message     
 
    
    
   

%L2-SONET_APS-6-REQUEST_PREEMPTED APS group [dec] [chars] [dec]: preempted

Explanation    The user external request is preempted.

Recommended Action    Not Action requirements.

Error Message     
 
    
    
   

%L2-SONET_APS-6-UPDOWN [chars] [chars] [dec] [chars] [dec] [chars]

Explanation    Debug messages for APS.

Recommended Action    No Action requirements.

Error Message     
 
    
    
   

%L2-SONET_APS-7-ERROR [chars] failed ([chars]) - [chars]

Explanation    A general failure occured while executing the function in question. The message contains info about the cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of SONET APS.

Error Message     
 
    
    
   

%L2-SONET_APS-7-NOMEM Not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

SONET_LOCAL Messages

Error Message     
 
    
    
   

%L2-SONET_LOCAL-4-ALARM [chars]: [chars] [chars]

Explanation    The specified SONET Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

SPA Messages

Error Message     
 
    
    
   

%L2-SPA-3-PLIM_HEARTBEAT_ERR [chars]: bay [dec] heartbeat failed, expected seq# [unsigned int] received seq# [unsigned int], Time since last message [dec]s

Explanation    The IPC communication between local CPU and host in the specified slot indicated in the message is not functional. If the problem persists the SPA will be reloaded to recover from the failure.

Recommended Action    If the problem persists, try to reseat the SPA. If reseating does not help, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message     
 
    
    
   

%L2-SPA-3-SYSDB_ERROR [chars]

Explanation    SPA Infrastructure SysDb error

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SPA-4-CERR_REGISTRATION_FAILURE Registration of error strings failed with error [hex]

Explanation    Error string reistration failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-SPA-5-APPS_IMAGE_DOWNLOADING Downloading SPA Application Image ([chars])...

Explanation    Downloading SPA Application image as indicated in the message

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-APPS_IMAGE_ERROR Download SPA Application Image failed.

Explanation    Failed to download the SPA Application image.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-APPS_IMAGE_SIZE_ERR SPA Application image exceeds RAM size: Image size ([dec]) Shared mem size ([dec])

Explanation    The size of the SPA Application image is too big.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-DOWNLOAD_METHOD_ERR SPA Download method [dec] not supported

Explanation    The specified download method is not supported

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-FILE_SIZE_ERR SPA File exceeds Rdisk size: File size ([dec]) Rdisk size ([dec])

Explanation    The size of the SPA File is too big.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OIR_ERROR [chars]

Explanation    SPA related error as indicated in the msg

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OIR_INSERTED SPA discovered in bay [dec]

Explanation    For displaying SPA OIR.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OIR_REMOVED SPA removed from bay [dec]

Explanation    For displaying SPA OIR.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OS_IMAGE_DOWNLOADING Downloading SPA OS Image ([chars])...

Explanation    Downloading SPA OS image as indicated in the message

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OS_IMAGE_ERROR Download SPA OS Image failed

Explanation    Failed to download the SPA OS image.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-OS_IMAGE_SIZE_ERR SPA OS image exceeds RAM size: Image size ([dec]) Shared mem size ([dec])

Explanation    The size of the SPA OS image is too big.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-PLIM_EVENT_INIT_ERR SPA Init Event Server failed

Explanation    Creating SPA event handling server failed.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-PLIM_KA_INIT_ERR SPA Init SPA Keepavlie Handler failed

Explanation    Creating SPA keepalive server failed.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-PLIM_RELOADING Reloading [chars] in subslot [unsigned int] after heartbeat failure ...

Explanation    Reloading SPA because of heartbeat failure.

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPA-5-STATE_CHANGE SPA in bay [dec] [chars]

Explanation    For displaying state of a SPA

Recommended Action    none.

SPAMSG Messages

Error Message     
 
    
    
   

%L2-SPAMSG-3-ERR [chars]

Explanation    SPA related error msg

Recommended Action    none.

Error Message     
 
    
    
   

%L2-SPAMSG-6-INFO [chars]

Explanation    SPA related info

Recommended Action    none.

STREE Messages

Error Message     
 
    
    
   

%L2-STREE-4-CONNECT_FAIL STP Server not available

Explanation    stp_process is most likely in a bad state or basic system services have failed. stp_process error messages are generally indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-STREE-4-CREATE_FAIL STP Create Failed : [chars]

Explanation    stp_process ran into errors while creating the spanning tree instance for control ethernet. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-STREE-4-MSGSEND_FAIL Message Send Failed : [chars]

Explanation    stp_process is most likely in a bad state or basic system services have failed. stp_process error messages are generally indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-STREE-4-PORT_CREATE_FAIL Stp port creation fail : [chars]

Explanation    Spanning tree port creation failed on the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Spanning tree port creation will be retried automatically. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-STREE-4-SET_MACADDR_FAIL STP Set Mac Addr Failed : [chars]

Explanation    MAC address assigned to the spanning tree was either invalid or was not able to be set for the spanning tree instance. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-STREE-4-START_FAIL Failed to start STP instance : [chars]

Explanation    Spanning tree could not be started on the control ethernet for the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.

Recommended Action    Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

T1E1 Messages

Error Message     
 
    
    
   

%L2-T1E1-2-NOMEM [chars]([dec]): not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

Error Message     
 
    
    
   

%L2-T1E1-3-ERROR [chars]([dec]): [chars] failed ([chars]) - [chars]

Explanation    A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of T1E1.

Error Message     
 
    
    
   

%L2-T1E1-4-ALARM [chars]: [chars] [chars]

Explanation    The specified T1E1 Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-T1E1-4-LOOPSTATUS [chars] [chars]

Explanation    A configurable controller loopback status.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-T1E1-4-UPDOWN [chars]: [chars] [chars]

Explanation    The specified T1E1 is operationally down due to alarm. Check alarm status using show controller t1 command on the cli.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-T1E1-4-WARNING [chars]([dec]): [chars] - [chars]

Explanation    A non-fatal error occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of T1E1.

T3E3 Messages

Error Message     
 
    
    
   

%L2-T3E3-2-NOMEM [chars]([dec]): not enough memory for [chars]

Explanation    The process is out of memory.

Recommended Action    Check process list for source of memory loss. Check if h/w memory requirements are met.

Error Message     
 
    
    
   

%L2-T3E3-3-ERROR [chars]([dec]): [chars] failed ([chars]) - [chars]

Explanation    A general failure occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of T3E3.

Error Message     
 
    
    
   

%L2-T3E3-4-ALARM [chars]: [chars] [chars]

Explanation    The specified T3E3 Alarm has been declared or released.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-T3E3-4-FEAC [chars] [chars]

Explanation    New Far End Alarm Code received.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-T3E3-4-LOOPSTATUS [chars] [chars]

Explanation    A configurable controller loopback status.

Recommended Action    None.

Error Message     
 
    
    
   

%L2-T3E3-4-UPDOWN [chars]: [chars] [chars]

Explanation    The specified T3E3 is operationally down due to alarm. Check alarm status using show controller t3 command on the cli.

Recommended Action    Recommended action is to repair the source of the alarm.

Error Message     
 
    
    
   

%L2-T3E3-4-WARNING [chars]([dec]): [chars] - [chars]

Explanation    A non-fatal error occured while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.

Recommended Action    Verify continued correct operation of T3E3.

UDLD Messages

Error Message     
 
    
    
   

%L2-UDLD-4-DISABLE_PORT UDLD protocol detected Uni-directional link on [chars], Port Disabled

Explanation    UDLD protocol detects if a link is uni-directional and disables the port. Uni-directional links can cause problems in ethernet networks and should be fixed.

Recommended Action    Check the link on which the error happenned. Try replacing/reconnecting the GBIC/SFP/cable at either end of the link. Re-enable the port on the RP and see if the port comes up. If the problem still exists the port will be disabled again with this message. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

VCM_CLIENT Messages

Error Message     
 
    
    
   

%L2-VCM_CLIENT-1-COMM_ERR [chars] : [chars]

Explanation    Error in communication.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

VCM_EA Messages

Error Message     
 
    
    
   

%L2-VCM_EA-2-INTERNAL_ERR [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-VCM_EA-2-INTERNAL_ERR_2 [chars]: [chars]

Explanation    Internal error with error message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

VCM Messages

Error Message     
 
    
    
   

%L2-VCM-2-IM_ATTR_ERR IM Attribute Error : [chars] : [dec]

Explanation    Error in IM Attribute operation

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-VCM-2-IM_ERR [chars] : [chars]

Explanation    Error in IM operation

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-VCM-2-INTERNAL_ERR [chars] : [chars] : [chars]

Explanation    Internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Recommended Action   

vlan_netio Messages

Error Message     
 
    
    
   

%L2-vlan_netio-4-DEBUG_INIT_ERROR An error occurred during debug initialization (error: [chars])

Explanation    The VLAN NetIO component encoutered an error during debug initialization. This is likely to cause VLAN interface setup to fail.

Recommended Action    If this error occurred as a result of applying configuration, try removing and reapplying the configuration. If this does not work, it may be necessary to reload the affected linecard. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

vlea Messages

Error Message     
 
    
    
   

%L2-vlea-3-NATIVE_VLAN_NOTIF Failed to generate a notification for the Native VLAN (error: [chars])

Explanation    The VLAN EA process encountered a problem while trying to send a Native VLAN change notification. Native VLAN support for interfaces on the affected node may not function correctly.

Recommended Action    Restart the VLAN EA process on the affected node with process restart vlan_ea location (node). If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-3-NO_STATS VLAN EA failed to register with the statistics server (error: [chars])

Explanation    The VLAN EA process encountered an error while registering with the statistics server process. No VLAN sub-interface statistics will be gathered on the given linecard.

Recommended Action    This error message indicates a problem with in the statistics server process on the RP, or with the communications between the linecard and the RP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-AIB_INIT_FAILED Failed during initialization: could not connect to AIB (error: [chars])

Explanation    The VLAN EA process attempted to connect to the AIB process during initialization, but encountered an error. The VLAN EA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-DEBUG_REG_FAILED Failed to register for debugging (error: [chars])

Explanation    It was not possible for the VLAN EA process to initialize its debugging support. The VLAN EA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-ERROR_DLL_REG_FAILED Failed to register the VLAN EA process error DLL (error: [chars])

Explanation    The VLAN EA process failed to register its error messages. Some error messages may not be correctly displayed, but this message is otherwise harmless.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-vlea-4-EVENT_BLOCK An error was received while waiting for an event (error: [chars])

Explanation    The VLAN EA process encountered an error while listening for events. The process will automatically restart and retry.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-IMP_CANT_REPLY Unable to reply to IMP (error: [chars])

Explanation    The VLAN EA process encountered an error processing a message from the IMP process, and is unable send a reply. This may be due to a low memory condition in which case the error code will indicate this.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*.

Error Message     
 
    
    
   

%L2-vlea-4-IMP_INIT_FAILED Failed during initialization: could not connect to IMP (error: [chars])

Explanation    The VLAN EA process attempted to connect to the IMP process during initialization, but encountered an error. The VLAN EA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-IMP_REG_FAILED Failed to register for notifications with IMP, err: [chars]

Explanation    During initialization, the VLAN EA process attempted to register with the IMP process for a required service, but encountered an error. The VLAN EA process will automatically retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-INIT_FAILED VLAN EA initialization failed (error: [chars])

Explanation    The VLAN EA process failed to initialize. Previous messages may give the reason. The process will automatically restart and retry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-4-NETIO_INIT_FAILED Failed during initialization: could not connect to NetIO (error: [chars])

Explanation    The VLAN EA process attempted to connect to the NetIO process during initialization, but encountered an error. The VLAN EA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlea-6-NO_MEM Out of memory (failed attempt to reserve [unsigned int] bytes)

Explanation    The VLAN EA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

vlma Messages

Error Message     
 
    
    
   

%L2-vlma-3-BULK_IM_HANDLER_FAILED The handling of a bulk [chars] notification failed on [chars] for [dec] out of a batch of [dec] interfaces

Explanation    The VLAN MA process encountered an error while processing a batch of messages from Interface Manager about VLAN subinterfaces. The operation of VLAN subinterfaces on the specified node may be affected.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-BULK_IM_HANDLER_FAILED_ALL The handling of a bulk [chars] notification failed on [chars] for a batch of [dec] interfaces (all with error: [chars])

Explanation    The VLAN MA process encountered an error while processing a batch of messages from Interface Manager about VLAN subinterfaces. The operation of VLAN subinterfaces on the specified node may be affected.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-BULK_L2VPN_FAILED The handling of a bulk [chars] notification failed on [chars] for [dec] out of a batch of [dec] ACs

Explanation    The VLAN MA process encountered an error while processing a batch of L2VPN messages. L2VPN functionality on the affected node may be impaired.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-BULK_L2VPN_FAILED_ALL The handling of a bulk [chars] notification failed on [chars] for a batch of [dec] ACs (all with error: [chars])

Explanation    The bulk operation to process the L2VPN notification for a batch of sub-interfaces failed.

Recommended Action    The VLAN MA process encountered an error while processing a batch of L2VPN messages. L2VPN functionality on the affected node may be impaired.

Error Message     
 
    
    
   

%L2-vlma-3-BULK_L2VPN_FAILED_BATCH The handling of a bulk [chars] notification failed on [chars] for a batch of [dec] ACs (error: [chars])

Explanation    The VLAN MA process encountered an error while processing a batch of L2VPN messages. L2VPN functionality on the affected node may be impaired.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-IM_ATTR_MSG_FAILED Failed to generate an IM attribute notification on [chars] (error: [chars])

Explanation    The VLAN MA process encountered an error while sending information about subinterfaces to other processes in the system. The operation of VLAN subinterfaces on the affected node may be impaired.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-IM_CONNECT_FAILED Failed to connect to IM, err: [chars]

Explanation    The VLAN MA process failed to connect to the IM server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-IM_RESTART_RESYNC_FAILED Could not syncronize interface data for ([chars]) with IM (error: [chars])

Explanation    The VLAN MA process was not able to fully resynchronize its internal database with that of IM. This may cause some loss of VLAN functionality on the VLAN trunk interface on which the error occurred, and its subinterfaces.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-3-L2VPN_DISCONNECT_FAILED The handling of a L2VPN Mgr disconnect notification failed for [unsigned int] trunk interface(s). The first failure was on [chars] (with error: [chars])

Explanation    When the VLAN MA notices that it has lost its connection to the L2PVN Manager process, it needs to update its database to reflect this. This error message indicates that this the update failed. The only expected scenario that could cause the error is a low memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%L2-vlma-3-MAIN_INTF_INIT_FAILED Failed to perform initialization of trunk interface [chars], due to the following error: [chars]

Explanation    The VLAN MA process encountered a problem while setting up the specified trunk interface for VLAN operation. No sub-interfaces of the specified trunk interface can be created.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-ASYNC_HANDLER Couldn't install the default handler for async msgs, err: [chars]

Explanation    The VLAN MA process couldn't install the default event handler for async msgs.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%L2-vlma-4-ATTR_NOTIF_LOST The IM attribute notification '[chars]' could not be processed (error: [chars])

Explanation    The VLAN MA process encountered an error while processing an attribute change (e.g. a MAC address change) related to an interface. The operation of VLAN subinterfaces on the specified node may be affected.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-BULK_IM_HANDLER_FAILED_BATCH The handling of a bulk [chars] notification failed on [chars] for a batch of [dec] interfaces, err: [chars]

Explanation    The VLAN MA process encountered an error while processing a batch of messages from Interface Manager about VLAN subinterfaces. The operation of VLAN subinterfaces on the specified node may be affected.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-DEBUG_REG_FAILED Failed to register for debugging (error: [chars])

Explanation    It was not possible for the VLAN MA process to initialize its debugging support. The VLAN EA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-EVENT_BLOCK An error was received while waiting for an event (error: [chars])

Explanation    The VLAN MA process encountered an error while listening for events. The process will automatically restart and retry.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-IM_HANDLER_FAILED The handling of a [chars] notification failed on [chars] due to error: [chars]

Explanation    The VLAN MA process encountered an error while processing a message from Interface Manager. The operation of VLAN subinterfaces on the specified node may be affected.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-IM_INIT_FAILED Failed during initialization: could not connect to IM (error: [chars])

Explanation    The VLAN MA process attempted to connect to the Interface Manager process during initialization, but encountered an error. The VLAN MA process will restart automatically and retry. Until it succeeds, VLAN functionality may not work on the affected node.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-INIT_FAILED VLAN MA initialization failed (error: [chars])

Explanation    The VLAN MA process failed to initialize. Previous messages may give the reason. The process will automatically restart and retry.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-4-RECOVERY_FAILED Failed to recover from resynchronization with another component for [chars], due to the error: [chars]

Explanation    The VLAN MA failed to resynchronize its configuration with another component in the system after an earlier failure, or process restart.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-vlma-6-NO_MEM Out of memory (failed attempt to reserve [unsigned int] bytes)

Explanation    The VLAN MA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%L2-vlma-6-UNKNOWN_NODE_VLAN_LIMIT Failed to determine the maximum number of VLAN sub-interface that are allowed to be configured on the given node (error: [chars])

Explanation    A failure occurred while trying to determine the maximum number of VLAN sub-interfaces that can be supported on the given node. The system may allow configuration of more VLAN sub-interfaces that can be supported, or may not allow the full number supported to be configured.

Recommended Action    After gathering the information specified, it may help to restart the VLAN MA process on the affected node, with proc restart vlan_ma location [location]. If this restart completes without the message appearing again, the problem has been resolved. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information

WAN_INARP Messages

Error Message     
 
    
    
   

%L2-WAN_INARP-2-INIT failed to initialize: [chars]

Explanation    During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-CONFIG config error, [chars][[dec]]: [chars]

Explanation    A configuration update has caused a problem inside the InARP code - InARP should continue but may have ignored the latest config change

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-NOMEM possibly unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-UNKNOWN_EVENT recieved an unknown event: [dec]

Explanation    The system must be sending messages we didn't register for. They will be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-UNKNOWN_FSMSTATE The fsm state ([dec]) is invalid

Explanation    The FSM has got into an invalid state

Recommended Action    Restart the SFRAR/SAAR processes (contain the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-UNKNOWN_IDB recieved information about an unrecognised interface

Explanation    A set of IDBs are kept with information on each interface. Somehow this information has become inconsistent with the system.

Recommended Action    Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-UNKNOWN_IDBTYPE The type ([dec]) of this IDB is invalid

Explanation    Information about InARP interfaces has become corrupted.

Recommended Action    Restart the main processes (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-UNKNOWN_IFSTATE The if state ([dec]) is not handled

Explanation    There is no action assigned to the if state change, and so nothing has been done when it was received.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-3-VCCLASS_IDB The IDB is not in synch with the vc-class information

Explanation    A set of IDBs are kept with information on each FR interface. A set of VC-CLASSes are also kept and associated with the IDBs. Somehow this information has become inconsistent.

Recommended Action    Restart the main process (containing the InARP DLL) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_INARP-4-UNKNOWN_INTF failed lookup of interface: [chars]

Explanation    The system must be sending messages we didn't register for. They will be ignored.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

WAN_LIB_IFDB Messages

Error Message     
 
    
    
   

%L2-WAN_LIB_IFDB-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_LIB_IFDB-3-UNKNOWN_IDBTYPE unknown idb type: [dec]

Explanation    The IDB type of this IDB is not recognised.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

WAN_LIB_VCC Messages

Error Message     
 
    
    
   

%L2-WAN_LIB_VCC-3-NOMEM unable to allocate [dec] bytes of memory

Explanation    The system is low on memory and not enough was available to complete the request

Recommended Action    Check the box for processes with excessive memory If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-WAN_LIB_VCC-3-UNKNOWN_IDBTYPE unknown idb type: [dec]

Explanation    The IDB type of this IDB is not recognised.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

XCONNECT Messages

Error Message     
 
    
    
   

%L2-XCONNECT-3-EDM_INIT [chars]: [chars]

Explanation    Initialization failed. Usually needs to restart.

Recommended Action    *SUPPORT

Error Message     
 
    
    
   

%L2-XCONNECT-3-ERROR [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-3-init [chars]

Explanation    Some initialization function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-3-LIB Library function call [chars] failed

Explanation    Library function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-3-NO_MEM [chars]

Explanation    Memory allocation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-4-WARNING [chars] failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-6-CONSUMER_SEND Try to send a message as non-consumer to the producer [chars]

Explanation    May have not registered as a consumer

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-6-GENERIC [chars]

Explanation    Some generic errors.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-6-TRACE [chars]: [chars], [dec], [dec]

Explanation    Some trace information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%L2-XCONNECT-6-UNSUPPORTED Get an unsupported [chars]: [dec]

Explanation    Get an unsupported message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information