Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
System Database Messages
Downloads: This chapterpdf (PDF - 382.0KB) The complete bookPDF (PDF - 1.84MB) | Feedback

System Database Messages

Table Of Contents

System Database Messages

SMC Messages

SMS Messages

SYSDB Messages


System Database Messages


This section contains all system database related System Error Messages. The following facility codes are represented in this module:

SMC Messages

SMS Messages

SYSDB Messages

SMC Messages

Error Message     
 
    
    
   

%SYSDB-SMC-7-DEPRECATED_PATH SysDB path '[chars]' is deprecated

Explanation    An operation has been attempted on a part of the SysDB namespace that should no longer be used.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SMC-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-INTERNAL_STATE [chars]

Explanation    The server has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-INVALID_PATH SysDB path '[chars]' is invalid

Explanation    An operation has been attempted on a part of the SysDB namespace that should not be used.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%SYSDB-SMC-7-MISSING_NODE_NFN Missing node down notification from node [chars]

Explanation    No node down notification was received from the underlying infrastructure for a recent node reload.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMC-7-MULTI_NODE_TRANS Multi-node access from transaction will be non-atomic (transaction node [dec]:[dec], accessing node [dec]:[dec], by [chars])

Explanation    An application tried to use a transaction to access multiple nodes; this is not supported currently.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMC-7-PARSE_FAILED [chars] ('[chars]' from '[chars]')

Explanation    A pathname was used for a SysDB operation from which the destination node could not be parsed.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]

Explanation    There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.

Recommended Action    Upgrade all nodes to have the same version of SysDB installed.

Error Message     
 
    
    
   

%SYSDB-SMC-7-TIMEOUT Message #[unsigned int], destined for [chars], timed out having received [unsigned int] of [unsigned int] expected responses: returning [chars] to client [chars]. Check for deadlocked SysDB processes or transport issues within the system

Explanation    A request timed out before SysDB MC received the expected number of replies

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-TRANS Attempted multi-node access from transaction was prevented (attempted to access multi-cast group [dec])

Explanation    A client attempted to use an unsupported distributed transaction.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex]

Explanation    We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMC-7-UNEXPECTED_MULTIPLE_RESPONSES Received unexpected multiple responses for message of type [hex]

Explanation    The SysDB Medusa process received multiple responses for a message type for which only a single response was expected.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMC-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]

Explanation    The server has come across an unexpected value for the specified parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMC-7-WRONG_PLANE An attempt was made to access SysDB path '[chars]'. This resolves to the [chars] plane and cannot be accessed on this card type.

Explanation    An application has tried to access a plane of SysDB data that does not exist on this node.

Recommended Action    *RECUR*

SMS Messages

Error Message     
 
    
    
   

%SYSDB-SMS-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The SysDB server has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The SysDB server has either failed to acquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-MISSING_NODE_NFN Missing node down notification from node [chars]

Explanation    No node down notification was received from the underlying infrastructure for a recent node reload.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMS-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]

Explanation    There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB server.

Recommended Action    Upgrade all nodes to have the same version of SysDB installed.

Error Message     
 
    
    
   

%SYSDB-SMS-7-RESTARTING This process is restarting, as an essential piece of infrastructure ([chars]) is failing. [chars] ([chars]).

Explanation    The SysDB server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-SEND_RESPONSE Sending [chars] via group_sendv_memberset failed [msg_size [unsigned int]]: [hex] ([chars])

Explanation    The SysDB server failed to send a message to the SysDB Medusa Client

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SMS-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex]

Explanation    We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%SYSDB-SMS-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]

Explanation    The SysDB server came across an unexpected value for the specified parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SYSDB Messages

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_BIND [Sysdbcon] Could not bind to SysDB: [chars]

Explanation    Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_DATATYPERET [Sysdbcon] SysDB returned unrecognised datatype ([unsigned int])

Explanation    The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_EXTFMTSTR [Sysdbcon] Unable to extract format string from packed tuple

Explanation    The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_FILEREAD [Sysdbcon] Unable to read from command file

Explanation    An error occurred during a read operation from the instruction file.

Recommended Action    Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_INTERR [Sysdbcon] An internal error has occurred

Explanation    The code has performed an action which should not be possible.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_NOFILE [Sysdbcon] The specified command file ([chars]) could not be opened

Explanation    The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied.

Recommended Action    Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDREAD [Sysdbcon] Unable to read in data for packed tuple

Explanation    An error occurred while preparing to read instructions from the command line.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDTUPLECRE [Sysdbcon] Unable to create packed tuple

Explanation    An error occurred creating a packed tuple.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_PKDTUPLEFILE [Sysdbcon] No data for packed tuple in file

Explanation    An error occurred during a read operation from the instruction file.

Recommended Action    Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_READERINIT [Sysdbcon] Unable to initialize the command line reader

Explanation    An error occurred while preparing to read instructions from the command line.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-3-SC_UNPACKTUP [Sysdbcon] Unable to unpack packed tuple

Explanation    The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ABORTBULK [Sysdbcon] While aborting a bulk operation the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ABORTTRANS [Sysdbcon] While aborting a transaction the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BAD_INTEGER [Sysdbcon] Warning: bad integer format or integer value is out of range.

Explanation    The user entered integer in unrecognized format or out of range of current integer data type.

Recommended Action    Correct input value and run command again.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BADFORMAT [Sysdbcon] Badly formatted command

Explanation    An unescaped ''' character was found part way through a token in a command string.

Recommended Action    Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BIND_NOTFOUND [Sysdbcon] Warning: now bound to a non-existent node.

Explanation    The user bound to a node which does not exist. This is a warning only - this action is perfectly legal.

Recommended Action    Check that this is the directory you intended to bind to.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_BULK_NUM_OPS [Sysdbcon] While getting the number of operations in the bulk the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_ADD_DELETES [Sysdbcon] While adding deletes to the bulk buffer the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_ADDDIFFS [Sysdbcon] While adding diffs to the bulk the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_DELETE [Sysdbcon] While performing a bulk regular expression delete the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CFGMGR_MERGE [Sysdbcon] While merging files the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_COMMITTRANS [Sysdbcon] While committing a transaction the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_COPY [Sysdbcon] While copying item [chars] to [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string.

Recommended Action    Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_CREATE [Sysdbcon] While creating item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string.

Recommended Action    Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATAFIND [Sysdbcon] While executing the find data request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATALIST [Sysdbcon] While executing the datalist request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DATATYPE [Sysdbcon] Unrecognised datatype ([chars])

Explanation    A datatype other than one of those supported was supplied.

Recommended Action    Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_DELETE [Sysdbcon] While deleting item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string.

Recommended Action    Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EDM_NOT [Sysdbcon] While generating EDM notifications the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ENDBULK [Sysdbcon] While ending a bulk operation the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ERRORSLIST [Sysdbcon] While executing the errors list request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EVENT [Sysdbcon] Unrecognised notification event ([chars])

Explanation    A notification event other than one of those supported was supplied.

Recommended Action    Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EVENTFIND [Sysdbcon] While executing the event find request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_EXCESS [Sysdbcon] Excess tokens in command string

Explanation    There were more tokens entered as part of the command string than are required for the command.

Recommended Action    Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FILERESTORE [Sysdbcon] While restoring items from a file the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FILESAVE [Sysdbcon] While saving items to a file the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_FIND [Sysdbcon] While executing the find request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_GET [Sysdbcon] While fetching item [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string.

Recommended Action    Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_GET_ITEMS [Sysdbcon] While fetching items from path [chars] the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string.

Recommended Action    Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_ITERATE [Sysdbcon] While executing the iterate request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SYSDB-SYSDB-4-SC_LIST [Sysdbcon] While executing the list request the following error occurred:
[chars]

Explanation    An error occurred invoking a SysDB function. The details are in the error string.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.