Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
Replicator Messages
Downloads: This chapterpdf (PDF - 319.0KB) The complete bookPDF (PDF - 1.84MB) | Feedback

REPLICATOR Messages

Table Of Contents

REPLICATOR Messages

REPLICATOR Messages


REPLICATOR Messages


This section contains all Replicator related System Error Messages. The following facility codes are represented in this module:

REPLICATOR Messages

REPLICATOR Messages

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-3-IDT_FAIL Failed to complete IDT after several retries: rc [hex] ([chars])

Explanation    The replicator has repeatedly failed to complete IDT for a system data handle. There may be problems with communications or other low-level infrastructure.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-3-WRITE_OWNERSHIP_FAIL Failed to acquire data handle after several retries: rc [hex] ([chars])

Explanation    The replicator has repeatedly failed to acquire ownership of a system data handle. The client process may need restarting.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-4-NO_CB No completion notification received for update message [unsigned int]

Explanation    The replicator library did not receive a callback from the transport library. The update will be allowed to continue without the replication acknowledgement. If any replicas have not received the update, they will resync on the next update.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-7-CTX_NOT_FOUND Could not access [chars] context structure: rc [hex] ([chars])

Explanation    The replicator library was unable to access an internal structure. This may result in failure of data replication to the standby node(s).

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-7-INTERNAL [chars]: rc [hex] ([chars])

Explanation    The replicator library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])

Explanation    The replicator library has either failed to aquire or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-7-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The replicator has failed to acquire the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%REPLICATOR-REPLICATOR-7-WRITE_OWNERSHIP Failed to acquire data handle: rc [hex] ([chars])

Explanation    The replicator has failed to acquire ownership of a system data handle.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information