Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
Operating System (OS) Messages
Downloads: This chapterpdf (PDF - 428.0KB) The complete bookPDF (PDF - 1.84MB) | Feedback

Operating System (OS) Messages

Table Of Contents

Operating System (OS) Messages

RDS Messages

RDSFS Messages

REGEXP Messages

RSI_AGENT Messages

RSI_MASTER Messages

RSVDPMEM Messages

RT_CHECK_LIB Messages

RT_CHECK Messages

SHMWIN_SVR Messages

SHMWIN Messages

SPAIPC_NETIO Messages


Operating System (OS) Messages


This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module:

RDS Messages

RDSFS Messages

REGEXP Messages

RSI_AGENT Messages

RSI_MASTER Messages

RSVDPMEM Messages

RT_CHECK_LIB Messages

RT_CHECK Messages

SHMWIN_SVR Messages

SHMWIN Messages

SPAIPC_NETIO Messages

RDS Messages

Error Message     
 
    
    
   

%OS-RDS-3-LOCK_FAILURE [chars] failed, errno=[dec]

Explanation    Lock/Unlock operation failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-NRS_CREATE_CLASS [chars]: nrs_create_class for [chars] failed, errno=[dec]

Explanation    nrs_create_class failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-NRS_REGISTER_BULK [chars]: nrs_register_bulk for CH=[hex] failed, rc=[dec] errno=[dec]

Explanation    nrs_register_bulk failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-PENDING_MSG [chars]: couldnt create pending msg for CH=[hex], DH=[hex], errno=[dec]

Explanation    couldnt create pending msg for the incoming write/publish.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SNAP_DUMP [chars]: handle=[hex] memory ptr=0x[pointer]

Explanation    rds hit an internal error.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_CREATE TID=[dec]: gs_sync_create failed for tag [hex], err [dec]

Explanation    Ticket create failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_RELEASE_FAILED TID=[dec]: Ticket Release failed rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec]

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST TID=[dec]: Ticket Request failed for ticket [hex], rp [pointer], err [dec]

Explanation    Ticket request failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST_TIMED_OUT TID=[dec]: Tick Req Timed out rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec], RETRYING...

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-SYNC_REQUEST_UNEXPECTED TID=[dec]: Tick Req unknown failure, rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec]

Explanation    Ticket request failed with unknown error.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-3-WRITE_TIMEDOUT rds_write DHDL=[hex]([chars]), req=[dec], resp=[dec], #wtrs=[dec]: [chars], errno=[dec], retries=[dec]

Explanation    rds_write request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-4-COND_TIMED_WAIT TID=[dec]: Unexpected error=[dec] from pthread_cond_timedwait cmd=[dec]

Explanation    pthread_cond_timedwait failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-4-RING_LOOKUP Lookup of identifier=[hex] index=[hex] in RING=[pointer] failed

Explanation    atomic tag ring lookup failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-BAD_RDSTYPE TID=[dec]: [dec]: Wrong replica type passed, expected=[dec]..

Explanation    passed in replica_id is wrong.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-DUPLICATE_TICKET_NOTIF TID=[dec]: [dec]: Duplicate Tick Notif (Dropping it) rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] TickCurr=[dec] TickHi=[dec] state=[hex]

Explanation    Got a ticket notification, for an already active ticket.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GENERIC_FAILURE_MSG [chars][dec]

Explanation    This is a generic error msg.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GET_DH_ENTRY [dec]: No entry for Datahandle=[hex], rp=[pointer] vec=[pointer] errno=[dec]

Explanation    Could find datahandle entry in the vector for replica

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GET_REPLICA [dec]: [chars] for CH=[hex], errno=[dec], rds_type=[dec]

Explanation    Couldnt get the replica entry

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GROUP_SEND_RINFO [chars]: group_send_rinfo failed GID=[hex], errno=[dec], rc=[dec], #resp=[dec], pattern=[chars]

Explanation    group_send_rinfo failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-GSM_FAIL GSM for [chars] Failed for Handle=[hex], to (g:[hex]/n:[hex]/p:[dec]), errno=[dec]

Explanation    group_send_memberset failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-INVALID_ARGS [dec]: invalid args passed

Explanation    a function was invoked with invalid arguments

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-INVALID_RHDR [dec]: invalid rhdr=[pointer] passed

Explanation    a function was invoked with invalid rhdr msg

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NO_PREQ_ENTRY [chars].[dec]: [chars] rp=[pointer] nptr=[pointer] from sender=g:[dec]/n:[dec]/p:[dec]

Explanation    Couldnt find pending request entry in the pending list.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NRS_DECODE [chars], Datahandle=[hex], errno=[dec]

Explanation    An internal NRS function failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-NRS_SEARCH [chars]: nrs_search for [chars] failed, rc=[dec] errno=[dec]

Explanation    nrs_search failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-QUERY_PEERS_TIMED_OUT TID=[dec] Couldnt cmd=[dec] for GID=[hex] CHDL=[hex]([hex]) #to_resp=[dec] req=[dec] got=[dec] state=[hex], expstate=[hex] preq_id=[dec] rds_type=[dec]

Explanation    Ticket request timed out.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-READ_FAILED [chars] DH_ENTRY=[hex] for exp_len=[dec] got=[dec] rc=[dec] errno=[dec]

Explanation    ens_read API failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RDS-7-WRONG_PLANE [dec]: Wrong plane [dec] for [chars] failed..

Explanation    ens_bulk_register failed.

Recommended Action    Contact support.

RDSFS Messages

Error Message     
 
    
    
   

%OS-RDSFS-4-BAD_REPLICA Bad Replica detected: Condition-[chars] Path-[chars] Error-[chars].

Explanation    The current instance of RDSFS encountered an error so that it is no longer a replica.

Recommended Action    Contact customer support.

Error Message     
 
    
    
   

%OS-RDSFS-7-DEBUG PID:TID=[dec]:[dec] [chars] [chars] Error-[chars]

Explanation    RDSFS failure.

Recommended Action    Contact customer support.

Error Message     
 
    
    
   

%OS-RDSFS-7-FAILURE [chars] [chars] Error-[chars]

Explanation    RDSFS failure.

Recommended Action    Contact customer support.

Error Message     
 
    
    
   

%OS-RDSFS-7-INIT_FAILED Failed to initialize [chars] because [chars].

Explanation    RDSFS failed to initialize a module.

Recommended Action    Contact customer support

REGEXP Messages

Error Message     
 
    
    
   

%OS-REGEXP-6-ENOMEM % Out of memory

Explanation    *NONE*

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%OS-REGEXP-6-INTERNAL % Internal error

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-REGEXP-6-INVALID % invalid regexp: [chars]

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-REGEXP-6-REGERROR % [chars]

Explanation    *NONE*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_AGENT Messages

Error Message     
 
    
    
   

%OS-RSI_AGENT-2-RESOURCE_DOWN Critical resource '[chars]' required to operate was unavailable: [chars]

Explanation    A critical resource required to perform an operation was unavailable.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-CONSISTENCY_CHECK '[chars]' had a value of '[chars]', which did not match the expected value '[chars]'.

Explanation    A software bug when an internal data consistency check failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-ERR_GENERAL '[chars]' failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-ERR_INIT '[chars]' failed during initialization: [chars]

Explanation    Initialization of a required module failed. The process was unable to continue.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-INTF_MAPPING_CHANGE Unexpected interface name:handle mapping change from [chars]:[hex] to [chars]:[hex].

Explanation    An interface handle was received which does not match the interface handle already in the database.

Recommended Action    *SUPPORT

Error Message     
 
    
    
   

%OS-RSI_AGENT-3-NONRESPONSIVE_CLIENT Client '[chars]' has not processed an update [dec] seconds after being notified. Forcing reconnect. PID=[dec],

Explanation    RSI is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_MASTER Messages

Error Message     
 
    
    
   

%OS-RSI_MASTER-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating

Explanation    RSI Master terminated due to lack of memory for a critical operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_MASTER-3-ERR_GENERAL '[chars]' failed: [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation with error code.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSI_MASTER-3-ERR_GENERAL_NO_RC [chars]

Explanation    Some requested operation failed. The text of the message displays the failed operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSVDPMEM Messages

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-BAD_DATAFILE_VALUES Values from [chars] are invalid. data=[chars]. start=[dec], end=[dec].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-BAD_RETURN_VALUES Did not set return values correctly. start=[dec], end=[dec], base_addr=[hex], mem_size=[dec], mem_physical_start=[hex], mem_physical_size=[dec].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-INVALID_PARAMS Invalid parameters passed to function. [chars] is NULL

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-MEMUTIL_FIND_FAIL memutil_find_reserved_mem returned invalid memory reservation - mem_physical_start=[hex], mem_physical_size=[hex].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-NO_MATCHING_STRING Failed to find any line in [chars] containing string: [chars]

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-OPEN_FAIL Open of [chars] failed. Error [chars]

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RSVDPMEM-3-SSCANF_FAIL sscanf function failed to match required number of parameters. Matched [dec], error: [chars]. data=[chars].

Explanation    Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RT_CHECK_LIB Messages

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-CERR_REGISTER_DLL Could not register dll with error services: [chars]

Explanation    The call register the dll using cerr_register_dll failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-EVENT_MANAGER event manager function [chars] failed: [chars]

Explanation    A call to an event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_CONN [chars]: error connecting with Group Services: [chars]

Explanation    A call to group_join() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_LOOKUP [chars]: error group lookup with Group Services: [chars]

Explanation    A call to group_lookup() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_NOTIFY [chars]: error group set notify with Group Services: [chars]

Explanation    A call to group_set_notify() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-GSP_SEND [chars]: error sending with Group Services: [chars]

Explanation    A call to group_send() failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-MGD_TIMER mgd timer function [chars] failed

Explanation    A call to a mgd timer interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK_LIB-3-PTHREAD Pthread operation [chars] [hex] failed: [chars]

Explanation    A pthread operation failed

Recommended Action    Contact support.

RT_CHECK Messages

Error Message     
 
    
    
   

%OS-RT_CHECK-3-BCDL_REQ BCDL [chars] request failure, error [dec]: [chars]

Explanation    A call to a BCDL interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-CHAN_CONN [chars] msg chan connect failed: [chars], error [dec]: [chars]

Explanation    A call to a LWM API failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-DEBUG_SERVICES debug services function [chars] failed

Explanation    A call to a debug services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_ENCODE_FAILED Failed to encode [chars] data in external data manager

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_LIST_ADD_FAILED Failed to add to an external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_LIST_CREATE_FAILED Failed to create external data manager list for [chars]

Explanation    A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EDM_REGISTER_FAILED Failed to register its external data manager: [chars]

Explanation    The process failed when attempting to register its external data manager with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-EVENT_MANAGER event manager function [chars] failed: [chars]

Explanation    A call to an event manager interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-GROUP group services function [chars] failed, error [dec]: [chars]

Explanation    A call to a group services interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-MEMORY Memory allocation error.

Explanation    Malloc or calloc returned a null pointer. This indicates an out of memory condition. The rt_check process will exit or return.

Recommended Action    Collect system log information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-MGD_TIMER mgd timer function [chars] failed

Explanation    A call to a mgd timer interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-PTHREAD pthread function [chars] failed

Explanation    A call to a pthread interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-PTHREAD_MUTEX Pthread operation [chars] [hex] failed: [chars]

Explanation    The mutex lock/unlock failed

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_INIT Failed to initialize RSI client library: [chars]

Explanation    Failed to initialize RSI global client library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_TBL_ID Failed to get RSI tbl id from vrf name: [chars]

Explanation    The RSI failed to translate a vrf name into a tbl id.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-RSI_VRF_NAME Failed to get RSI vrf name from tbl id: [chars]

Explanation    The RSI failed to translate a tbl id to a vrf name.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-SYSDB [chars]

Explanation    A call to a sysdb interface failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-TIMER_INIT timer init failed

Explanation    A call to the rt_check timer init routine failed.

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-3-USAGE usage: [chars] [-m] [-u] [-M] [-U]

Explanation    Incorrect command line arguments were given to the module

Recommended Action    Contact support.

Error Message     
 
    
    
   

%OS-RT_CHECK-6-EDM_BAG_REGISTRATION_FAILED Failed to register its external data manager data blocks: [chars]

Explanation    The process failed while attempting to register its external data manager data blocks with SysDB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN_SVR Messages

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-EVM_ERROR [chars], Error: [chars]

Explanation    Failed in some event management functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-GLOBAL_MUTEX_ERR [chars] ([dec], [chars])

Explanation    Mutex lock/unlock failure has occurred for shmwins open/close operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-LWM_ERROR [chars], Error: [chars]

Explanation    Failed to execute some LWM library functions.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MAIN_INIT Initialization in main failed, Error: [chars]

Explanation    One of the functions called during initialization of the process failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MMAP_FAIL Failed to mmap [chars]

Explanation    mmap of the shared memory required to store servers tree nodes failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-MSG_ERROR Received a bad message, [chars]

Explanation    The message received by the server had inconsistent values.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-NO_MEMORY Failed in allocating memory

Explanation    Not enough memory available in the system.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-PLATFORM_FILE [chars], Error: [chars]

Explanation    Problem opening/reading from the platform shmwin file.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-QSM_ERROR Failed to publish QSM namespace, [chars]

Explanation    The server failed in advertising its namespace through QSM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SHM_ERROR [chars] [chars], Error: [chars]

Explanation    There was a problem with the shared memory file allocation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SHMWIN_SIZE [chars] area's size [dec] is smaller than [dec](shmwin header size)

Explanation    Opened shmwin size is smaller the shmwin header size.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-SVR_ERR [chars]

Explanation    An error has occurred in a server operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-3-WINDOW_MUTEX_ERR [chars] window:[chars] ([dec], [chars])

Explanation    Mutex lock/unlock failure has occurred for a shmwin open/close operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN_SVR-6-SHARED_MUTEX_REVIVED The shmwin control mutex was revived by shmwin_svr

Explanation    A participant process crashed while holding the shared shmwin control mutex and the shmwin_svr revived the mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN Messages

Error Message     
 
    
    
   

%OS-SHMWIN-2-ERROR_ENCOUNTERED SHMWIN: Error encountered: [chars]

Explanation    SHMWIN hit an error, which is described by the description printed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-2-SHARED_PAGE_ERROR SHMWIN: Shared page related error encountered: [chars]: failed with [chars]

Explanation    SHMWIN hit an error related to the shared page.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-ALLOC_ARENA_FAILED SHMWIN: Failed to allocate new arena from the server : [chars]

Explanation    SHMWIN failed to allocate the arena's virtual range from the server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-FREE_ARENA_FAILED SHMWIN: Failed to free VM at address [hex] back to the server : [chars]

Explanation    SHMWIN failed to free the arena's virtual range back to the server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-FSTAT_FAILED SHMWIN: fstat call for [chars] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, a fstat call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-FTRUNCATE_FAILED SHMWIN: [chars]: ftruncate for [chars] to size [dec] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, the ftruncate failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-MMAP_FAILED SHMWIN: [chars]: mmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, the mmap failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-MUNMAP_FAILED SHMWIN: [chars]: munmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, the munmap failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-MUTEXOP_FAILED SHMWIN: [chars] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, the a mutex operation failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-3-OPEN_FAILED SHMWIN: shm open for [chars] failed, error: [chars][[dec]]

Explanation    SHMWIN encountered an error condition, the shm open failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SHMWIN-6-FILE_EXISTS SHMWIN: [chars]: shmwin found file [chars] of size [dec] existing when not expecting, trying to continue

Explanation    SHMWIN encountered an error condition, the file was existing already.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SPAIPC_NETIO Messages

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetbase_builder_func() called with bad chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called!

Explanation    qnetbase_control_func() wrongly called.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetcaps_builder_func() called with wrong chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-DEBUG_INIT_FAILED [chars]:[dec] spaipc-base to register debug.

Explanation    debug_register() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called!

Explanation    qnetcaps_encaps() has been called, which should never happen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec])

Explanation    netio_dll_packet_input_NEW() to Qnet failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-SPAIPC_NETIO-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec]

Explanation    pak_netio_uint32_get() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.