Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
Media Messages
Downloads: This chapterpdf (PDF - 326.0KB) The complete bookPDF (PDF - 1.84MB) | Feedback

Media Messages

Table Of Contents

Media Messages

SYNCFS2 Messages

SYNCFS2LIB Messages


Media Messages


This section contains all MEDIA related System Error Messages, including disk, nvram, flash, and so forth. The following facility codes are represented in this module:

SYNCFS2 Messages

SYNCFS2LIB Messages

SYNCFS2 Messages

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-3-FAILURE [chars] [chars]: [chars]

Explanation    Syncfs failure

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-3-INIT_FAILED Failed to initialize module [chars] because [chars] and cannot continue.

Explanation    Syncfs failed to initialize a module.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-3-REGISTER_NTFN Failed to register with [chars] for notification

Explanation    Syncfs failed to register with qsm/lrd for notification

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-3-STBY_SYMLINK Failed to create link to Standby card: [chars]

Explanation    Syncfs failed to create required links to the standby card. Syncfs unable to mirror any files to the standby card.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-3-STBY_SYMLINK_NOTYET Symbolic Links to Standby root is not published yet.

Explanation    Syncfs noticed that required symbolic-links to the standby card, is not published yet. Syncfs will get notified when they are available.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-CLIENT_ERR [chars]: [chars]

Explanation    Failed function call.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-LOST_SYNC Unable to replicate [chars] [chars] to standby card because [chars]

Explanation    Syncfs failed to transfer the specified file to the standby card.

Recommended Action    Ensure there is sufficient disk space on standby card's filesystems, and that all removeable media is correctly inserted. Once resolved, power cycle the standby card using 'hw-module slot X shut' and 'no hw-module slot X shut' to resume synchronization.

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-LRD_AVAILABLE Standby has become AVAILABLE - START SYNC

Explanation    The Standby card has been inserted and sync will be started

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-LRD_NOTAVAILABLE Standby has been rendered UNAVAILABLE - STOP SYNC

Explanation    The Standby card has been either removed or put down by admin

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-LRD_PARTNER_AVAILABLE Standby has become AVAILABLE. LRD returned partner-node - START SYNC

Explanation    The Standby card has been inserted and sync will be started

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-MUTEX_LOCK Failed to lock mutex [chars]

Explanation    A required mutex lock failed.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-MUTEX_TEST_LOCK Mutex [chars] was found unlocked

Explanation    A mutex which should have been locked was tested and found unlocked

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-MUTEX_UNLOCK Failed to unlock a mutex [chars]

Explanation    A required mutex unlock failed.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2-7-REPLICATE_FAIL Replication of [chars] [chars] failed: [chars] -- Retry will be attempted.

Explanation    Syncfs failed to replicate file/dir, it will retry it again.

Recommended Action    Contact customer support

SYNCFS2LIB Messages

Error Message     
 
    
    
   

%MEDIA-SYNCFS2LIB-6-LOST_SYNC File [chars] lost synchronization to standby card

Explanation    Syncfs failed to transfer a file to the standby card. If a card failover occurs, some data may be lost.

Recommended Action    None

Error Message     
 
    
    
   

%MEDIA-SYNCFS2LIB-7-MUTEX_LOCK Failed to lock mutex for file [chars]

Explanation    A required mutex lock failed.

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2LIB-7-MUTEX_TEST_LOCK Mutex for file [chars] was found unlocked

Explanation    A mutex which should have been locked was tested and found unlocked

Recommended Action    Contact customer support

Error Message     
 
    
    
   

%MEDIA-SYNCFS2LIB-7-MUTEX_UNLOCK Failed to unlock mutex for file [chars]

Explanation    A required mutex unlock failed.