Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
Installation Messages
Downloads: This chapterpdf (PDF - 313.0KB) The complete bookPDF (PDF - 1.84MB) | Feedback

Installation Messages

Table Of Contents

Installation Messages

SM Messages


Installation Messages


This section contains all installation related System Error Messages. The following facility codes are represented in this module:

SM Messages

SM Messages

Error Message     
 
    
    
   

%INSTALL-SM-3-CALLBACK Error returned when [chars]: [chars]

Explanation    This self-managing component reached an unexpected state, and was unable to proceed with the requested operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%INSTALL-SM-3-CANNOT_DO_DLL Error [chars] dll '[chars]'.

Explanation    To be filled in later

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%INSTALL-SM-3-COMMUNICATION Communication error ([chars]).

Explanation    The communications infrastructure may not yet be initialised. If this problem persists, seek guidance.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%INSTALL-SM-3-INTERNAL Internal error: [chars]

Explanation    This self-managing component reached an unexpected state, and was unable to proceed with the requested operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%INSTALL-SM-3-UNABLE_TO_PROCEED Unable to proceed ([chars]).

Explanation    This self-managing component encountered an expected error when attempting to carry out an action required for the currently requested operation, so has had to halt processing of the operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%INSTALL-SM-4-NONFATAL_ERROR [chars].

Explanation    A non-fatal error has been encountered. The system will continue to operate, but this error should be brought to the attention of TAC. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'