Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
Packet Infrastructure Messages
Downloads: This chapterpdf (PDF - 273.0KB) The complete bookPDF (PDF - 2.03MB) | Feedback

Packet Infrastructure Messages

Table Of Contents

Packet Infrastructure Messages

C12000_FWD_CLIENT_DLL Messages

ENCAP_RM Messages

ENCAP Messages

FM Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_NETIO_DLL Messages

PLATFORM_C12000_NETIO_LIB Messages

PLATFORM_LPTS_COM_IFIB Messages

PLATFORM_LPTS_COM_NETIO Messages

PLATFORM_LPTS_PIFIB Messages

PLATFORM_PFI Messages

TNODE Messages


Packet Infrastructure Messages


This section contains all Packet Infrastructure related System Error Messages, including ifmgr, tunnels, bundlemgr, pakman, and so forth. The following facility codes are represented in this module:

C12000_FWD_CLIENT_DLL Messages

ENCAP_RM Messages

ENCAP Messages

FM Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_NETIO_DLL Messages

PLATFORM_C12000_NETIO_LIB Messages

PLATFORM_LPTS_COM_IFIB Messages

PLATFORM_LPTS_COM_NETIO Messages

PLATFORM_LPTS_PIFIB Messages

PLATFORM_PFI Messages

TNODE Messages

C12000_FWD_CLIENT_DLL Messages

Error Message     
 
    
    
   

%PKT_INFRA-C12000_FWD_CLIENT_DLL-3-ERR [chars][dec]

Explanation    An error occured in the forwarder netio client dll (possible the plim driver)

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

ENCAP_RM Messages

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP_RM-3-FATAL_ERR Fatal error: [chars]: Err=[dec]

Explanation    A fatal error occurred in L2 Encap String RM which involves exiting the process.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP_RM-3-MSG_SEND_FAILED encap_rm: msg: [dec], retried: [dec] time(s), failed to send, errno: [chars]

Explanation    Unable to send a message to the L2 Encap String RM server.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP_RM-3-NONFATAL_ERR Nonfatal error: [chars]: Err=[dec]

Explanation    This is a error message in the L2 Encap String RM to indicate anomalies which are not FATAL. Some of the messages may indicate a failure to allocate resources needed by applications. In many cases these messages must not keep appearing after the temporary situation is resolved.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP_RM-3-OOR Failed to insert L2 encapsulation string. Out of resource condition reached.

Explanation    A request to insert a L2 encapsulation string into the encapsulation table has failed due to out of resource condition.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP_RM-6-INFO_MSG Info: [chars]

Explanation    This is an informational message in the L2 Encap String RM.

Recommended Action    No action is required.

ENCAP Messages

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP-3-DEBUG_INIT_EVENT_FAILED [chars]: debug_init_event([chars]) failed error [chars]

Explanation    Failed to switch ON debug event for encapsulation package.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP-3-DEBUG_REGISTER_FAILED [chars]: debug_register() failed error [chars]

Explanation    Failed to register debug events for encapsulation package.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP-3-FAILURE [chars]

Explanation    Failure in c12000/aib component.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP-3-SYSDB_BIND_FAILED sysdb_bind failed [hex], [chars]

Explanation    Failed to bind to sysdb.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-ENCAP-3-SYSDB_REGISTER_FAILED Failed to register for notification ,[[hex]] [chars]

Explanation    Failed to register with Sydb for item change notification

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

FM Messages

Error Message     
 
    
    
   

%PKT_INFRA-FM-3-INIT_ERROR Process initialization failed: ([chars]%s)

Explanation    The feature manager (feat_mgr) process failed to initialize. This process programs packet classification hardware for features which require an action to be performed based on the packet classification. If the feat_mgr process fails to initialize, the access control list cannot be programmed into the hardware. %s - indicates the reason for the initialization failure. %s - is the decoded error reason.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process feat_mgr location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart feat_mgr location 0/x/cpu0'. Collect all debug information if the process is continually restarting: 'debug featmgr error location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_EDGE_ADJ Messages

Error Message     
 
    
    
   

%PKT-INFRA-FWD_EDGE_ADJ-2-EDGE_ADJ_ERR GSR edge adj dll layer internal error [chars] : [chars]

Explanation    A runtime error occurred in GSR adj's egine layer. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_HAL Messages

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]

Explanation    A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-ADJ_ERR GSR adj internal error: [chars]

Explanation    A runtime error occurred in GSR adj module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]

Explanation    A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-FASTCONV_CLI_ERR FastConvergence CLI: [chars], error: [chars]

Explanation    A runtime error occurred while apply the Fast convergence CLI. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-HW_OCE_NULL [chars] - GSR HAL internal error: hal object ([chars]) getting a NULL hw_oce

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-INIT [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initalizing GSR Hardware Abstraction Layer (HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-INVALID_PARENT_OBJ GSR FIB internal error: [chars] failed to get parent [chars] obj - [chars]

Explanation    A runtime error occurred in GSR FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-LDI_ERR GSR loadinfo internal error: [chars]

Explanation    A runtime error occurred in GSR loadinfo module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-PFX_ERR GSR prefix internal error: [chars]

Explanation    A runtime error occurred in GSR prefix module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]

Explanation    A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-STATS_INTF_REGISTER Failed to register interface [hex] with Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to register the specified interface with Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-STATS_INTF_UNREGISTER Failed to unregister interface [hex] from Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to unregister the specified interface from Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-STATS_VALIDATION Stats validation error: [chars] ([dec]): [chars]

Explanation    A validation error occurred while doing an LSP/TE statistics operation. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources

Explanation    The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-2-USED_BY_BGP_STATUS_CHANGE Used by BGP status changed from [chars] to [chars] on obj 0x[pointer]

Explanation    Used by BGP status on the loadinfo changed. This is not generally expected and config needs to be examined to understand the cause. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT-INFRA-FWD_HAL-6-FASTCONVERGENCE_CLI_INFO WARNING: This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Explanation    This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Please reload the node using the command hw-module reload location r/s/CPU0

FWD_NETIO_DLL Messages

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-ATTACH_FAILED fwd: netio idb attach failed for plim interface: [hex].

Explanation    FWD was not able to attach to plim interface .

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-BAD_COMMAND_RESULT fwd: received bad command result for buffer request: [hex]

Explanation    FWD received a bad command result for BMA free buffer request

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-BMA_OUT_OF_SEQUENCE fwd: BMA buffer request/response sequence number mismatch - received [dec], expected [dec]

Explanation    FWD received an out of sequence BMA buffer request response

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-FATAL fwd: fatal error encountered, reason=[chars]

Explanation    Null Driver partner encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-FATAL_2 fwd: fatal error encountered, reason=[chars], errno=[dec]

Explanation    fwd encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-GET_CTX_ERR Failed to get idb ctx for port [dec], error - ([dec])

Explanation    FWD driver got a packet but couldn't map a port to an idb context

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-IDB_CTX_NULL FWD idb context for port [hex] is NULL!

Explanation    While processing an ingress packet, the fwd driver failed to find idb context

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-INCORRECT_IDB fwd: looking for plim interface: [hex], netio gave us: [hex].

Explanation    FWD was supplied with a plim interface that does not have an idb yet.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-INFO fwd: service degrading error, reason = [chars]

Explanation    The fwd encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-INVALID_PLIM_PORT fwd: invalid plim port for plim interface: [hex]

Explanation    FWD was supplied with a plim port that exceeds the limit of num ports.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-MALLOC_FAILED fwd: fatal memory allocation error for bytes

Explanation    FWD encountered a fatal memory allocation error

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-MISSING_IDB fwd: plim interface: [hex] does not have a netio idb.

Explanation    FWD was supplied with a plim interface that does not have an idb yet.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-MUTEXOPFAIL [chars]: Mutex [chars] operation failed on [chars]; reason [chars]

Explanation    The packet subsystem failed to get mutex.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-NETIO_IDB_UNAVAILABLE netio idb for interface [hex] not found, dropping packet 0x[pointer]

Explanation    While processing an ingress packet, the fwd driver failed to find netio idb

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-NO_OUTSTANDING_BMA_REQ fwd: received BMA buffer request response with no outstanding request

Explanation    FWD received a BMA interrupt indicating a response to a BMA buffer request but there was no request made

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-NOT_YET_IMPLEMENTED fwd: this function is not yet implemented

Explanation    FWD, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-QAD_EGRESS_Q_LOOKUP_ERR Failed to find netio egress qad queue. dropping packet 0x[pointer]

Explanation    While transmitting a packet down to the fabric, couldn't find the egress queue

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-QAD_Q_PRODUCE_FAILED Failed to populate netio egress queue, error - [chars]

Explanation    FWD driver failed to populate qad netio egress queue

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-QAD_RX_THREAD_ERR Failed to create forwarder qad rx thread, error - [chars]

Explanation    FWD driver failed to create qad rx thread

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%PKT_INFRA-FWD_NETIO_DLL-3-SET_INPUT_IF_ERR Failed to set input interface handle [hex] on packet

Explanation    While processing an ingress packet, the fwd driver failed to set input interface

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

PLATFORM_C12000_NETIO_LIB Messages

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_C12000_NETIO_LIB-4-FINT_IDB_NOT_FOUND Failed to obtain netio idb for FINT interface

Explanation    The FINT idb is not yet created in netio. This could be a transient condition.

Recommended Action    Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_C12000_NETIO_LIB-4-FINT_IDB_NOT_FOUND Failed to obtain netio idb for FINT interface

Explanation    The FINT idb is not yet created in netio. This could be a transient condition.

Recommended Action    Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_C12000_NETIO_LIB-4-GET_MYNODEID_FAIL Failed to obtain my node id [chars]

Explanation    Unable to determine my node id using platform api.

Recommended Action    Please capture show proc ouput and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_C12000_NETIO_LIB-4-GET_MYNODEID_FAIL Failed to obtain my node id [chars]

Explanation    Unable to determine my node id using platform api.

Recommended Action    Please capture show proc ouput and show logging output - 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_C12000_NETIO_LIB-4-GET_PPINDEX_INFO_FAIL Lookup for ppindex([dec]), pp_proto([dec]), failed due to [chars]

Explanation    Unable to get the adjacency and next hop information from given ppindex.

Recommended Action    Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked

PLATFORM_LPTS_COM_IFIB Messages

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    error in IFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' after '[chars]' in flow '[chars]'

Explanation    Syntax error in IFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG [chars]: Missing configuration for IFIB flow handling

Explanation    No configuration for IFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-3-NO_CONFIG_MEMORY [chars]: Insufficient memory for IFIB flow handling configuration

Explanation    Insufficient memory was available for storing the IFIB flow handling configuration. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when calling debug_cleanup() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when calling the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_IFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when calling debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLATFORM_LPTS_COM_NETIO Messages

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_NETIO-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when calling debug_cleanup() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_NETIO-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when calling the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_COM_NETIO-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when calling debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLATFORM_LPTS_PIFIB Messages

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-BACKEND_EDM [chars]: EDM backend function [chars] failed: [chars]

Explanation    An internal EDM backend function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-BAG [chars]: Bag function [chars] failed: [chars]

Explanation    An internal bag function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CHKPT_INIT [chars]: Checkpoint Initialization function [chars] failed: [chars]

Explanation    An internal Checkpoint function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_FLOW_MEMORY [chars]: Insufficient memory for flow configuration

Explanation    There is insufficient memory for the flow configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW [chars]: Flow type '[chars]' not configured

Explanation    error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_PARAMETER [chars]: Missing parameter after '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_MEMORY [chars]: Insufficient memory for policer configuration

Explanation    There is insufficient memory for the policer configuration. All flows will be assigned default characteristics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_INVALID [chars]: Invalid parameter '[chars]' after '[chars]' in policer '[dec]' definition

Explanation    There is an invalid parameter after a keyword in a policer definition. The policer may be assigned default characterstics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_MISSING [chars]: Missing parameter after '[chars]' in policer '[dec]' definition

Explanation    There is a missing required parameter after a keyword in a policer definition. The policer may be assigned default characterstics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in policer '[dec]' definition

Explanation    There is an unknown keyword in a policer definition. The policer may be assigned default characterstics.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_UNDEFINED_POLICER [chars]: flow '[chars]' references undefined policer '[dec]'

Explanation    An input flow definition references an undefined policer. The flow will be configured to use policer 0.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_KEYWORD [chars]: Unknown keyword '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_PARAMETER [chars]: Unknown parameter '[chars]' in flow '[chars]'

Explanation    Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_CREATE [chars]: could not create event connection: [chars]

Explanation    An internal error was detected when trying to create event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-EVENT_CONN_OPEN [chars]: could not open event connection: [chars]

Explanation    An internal error was detected when trying to open event connection.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-FM_ADD_FEAT2GRP [chars]: fm add feat to group failed for ISIS [chars]

Explanation    An internal fm add feature to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-FM_ADD_IFH2GRP [chars]: fm add ifh to group failed for ISIS [chars]

Explanation    An internal fm add ifh to group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-FM_CREATE_GROUP [chars]: fm create group failed: [chars]

Explanation    An internal fm create group function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-FM_FEAT_PROCESSING [chars]: fm feature registration failed: [chars]

Explanation    An internal fm feature registration function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-FM_REGISTER [chars]: fm_register failed: [chars]

Explanation    An internal fm_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-HFA_REGISTER [chars]: hfa_register failed: [chars]

Explanation    An internal hfa_register function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-LTRACE_INIT [chars]: ltrace_init2 failed: [chars]

Explanation    An internal ltrace_init2 function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-MSG_ATTACH [chars]: Event Mgr function [chars] failed: [chars]

Explanation    An internal Event Manager function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-NO_CONFIG [chars]: Missing configuration for PIFIB flow handling

Explanation    No configuration for PIFIB flow handling was found. Default characteristics will be used for all packets.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_CLOSE [chars]: Cleanup for EDM failed: [chars]

Explanation    Cleanup for EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-SHOW_EDM_INIT [chars]: Initialization for show EDM failed: [chars]

Explanation    Initialization for show EDM failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-SYSDB [chars]: Sysdb function [chars] failed: [chars]

Explanation    An internal sysdb function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-3-TCAM_FMT_TO_HFA_MAP [chars]: vmr_builder_program_tcam_fmt_from_hfa_map failed: [chars]

Explanation    An tcam format to hfa mapping function failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-7-DEBUG_CLEANUP [chars]: Debug cleanup failed: [chars]

Explanation    An error was returned when cleaning up debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-7-DEBUG_INIT_EVENT [chars]: Debug initialization for the lpts/[chars] event failed: [chars]

Explanation    An error was returned when initializing debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_LPTS_PIFIB-7-DEBUG_REGISTER [chars]: Debug registration failed: [chars]

Explanation    An error was returned when registering debug.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PLATFORM_PFI Messages

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_PFI-4-IFHANDLE_DECODE Could not map handle [hex] to slot

Explanation    The interface handle cannot be mapped to a slot on the card.

Recommended Action    Debug message only. *DEBUG*

Error Message     
 
    
    
   

%PKT_INFRA-PLATFORM_PFI-4-INIT Failed to initialise [chars]

Explanation    An error occured when a module was going to be initialised. This may cause the process to terminate.

Recommended Action    Restarting the process might help.

TNODE Messages

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-CAPS_LOOKUP Capsulation lookup failed : [chars]

Explanation    im_caps_lookup() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-CHAN_CREATE Failed to create channel : [chars]

Explanation    Failed to create a channel using event_manager_create.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-EVENT_INIT IM to initialize linecard dpf notification event : [chars]

Explanation    event_init_event() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-GET_RP_SLOT Failed to get RP slot number : [chars]

Explanation    primary_rp_slot_number() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-IF_FIND Failed to obtain interface handle ([chars]) : [chars]

Explanation    im_interface_find() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-IM_CTRLSVR_BIND Failed to bind to IM control server : [chars]

Explanation    im_control_server_bind() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-IM_DATAPATH_CTRL IM datapath control failed : [chars]

Explanation    im_caps_datapath_control() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-IM_DATASVR_BIND Failed to bind to IM data server : [chars]

Explanation    im_data_server_bind() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-LC_CONN_CREATE Failed to create transit-node lc connection : [chars]

Explanation    event_conn_create() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-LC_CONN_OPEN Failed to open transit-node lc connection : [chars]

Explanation    event_conn_open() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-PROC_RDY Failed to notify System Manager (Ready) : [chars]

Explanation    sysmgr_proc_ready() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-SYSDB_BIND Failed to bind to SysDB : [chars]

Explanation    sysdb_bind() call failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-SYSDB_COID Failed to obtain the file descriptor from SysDB connection : [chars]

Explanation    sysdb_conn_to_coid() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%PKT_INFRA-TNODE-3-SYSDB_REG Failed to register for notification for dpf events : [chars]

Explanation    sysdb_register_notification() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.