Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
Operating System (OS) Messages
Downloads: This chapterpdf (PDF - 163.0KB) The complete bookPDF (PDF - 2.03MB) | Feedback

Operating System (OS) Messages

Table Of Contents

Operating System (OS) Messages

GSP_NOTIF Messages

KD_MBUS Messages

QNET_LC Messages

QNET Messages


Operating System (OS) Messages


This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module:

GSP_NOTIF Messages

KD_MBUS Messages

QNET_LC Messages

QNET Messages

GSP_NOTIF Messages

Error Message     
 
    
    
   

%OS-GSP_NOTIF-3-msg_failed Failure to notify node state when [chars]: [chars]

Explanation    The internal communication channel is broken.

Recommended Action    Must restart the process.

KD_MBUS Messages

Error Message     
 
    
    
   

%OS-KD_MBUS-1-EVENT_MGR_CREATE_FAILED [chars]: can't create event manager. [chars]

Explanation    Failed to create event manager for the process

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-1-FLASH_FULL No space in bootflash to write. Size of data: [dec], Data: [chars]

Explanation    Bootflash is full

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-3-COMPRESS_INIT_FAILED Compress initialization failed. Probably low memory

Explanation    Could not initalize data structure for compression

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-3-CORE_FILE_OPEN_FAILED Could not open [chars]. Error: [chars]

Explanation    Open of file failed

Recommended Action    Check if valid file location and filename

Error Message     
 
    
    
   

%OS-KD_MBUS-3-DEBUG_INIT_FAILED [chars]

Explanation    Debug init failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-FAIL_DEBUG_REG [chars]: Can't connect to configuration, [chars]

Explanation    DUMPER debugging service register to sysdb failed.

Recommended Action    Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available.

Error Message     
 
    
    
   

%OS-KD_MBUS-3-SYSDB_BIND_FAILURE Unable to bind to [chars]. Error: [chars]

Explanation    Could not connect to sysdb

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-3-SYSDB_GET_FAILURE Unable to get item [chars]. Error: [chars]

Explanation    Item possible not in sysdb

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-3-WRITE_FAILED Write of size [dec] to fd [dec] failed. Error: [chars]

Explanation    Most probably some problem with the file system

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-4-SYSDB_SET_FAILURE Could not set [chars]. [chars]

Explanation    Could not set sysdb item.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%OS-KD_MBUS-6-CORE_DUMP_NOT_CONFIGURED Core dump failed since dump location not configured

Explanation    Core dump location needs to be configured before dumping

Recommended Action    Configure core dump location using exception kernel command

QNET_LC Messages

Error Message     
 
    
    
   

%OS-QNET_LC-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetbase_builder_func() called with bad chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called!

Explanation    qnetbase_control_func() wrongly called.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])

Explanation    qnetcaps_builder_func() called with wrong chain type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-CAPS_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Caps Control function erroneously called!

Explanation    qnetcaps_control_func() has been called, which should never happen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-DUPLICATE_BMA_PAK [chars]: Cannot duplicate BMA packet (rc=[dec] dropping Qnet packet.

Explanation    pak_netio_duplicate() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called!

Explanation    qnetcaps_encaps() has been called, which should never happen.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-LOST_QNET_CONN Lost connection to Qnet process; dropping packets.

Explanation    netio_dll_packet_input_NEW() to Qnet failed and Qnet connection is closed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec])

Explanation    netio_dll_packet_input_NEW() to Qnet failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%OS-QNET_LC-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec]

Explanation    pak_netio_uint32_get() failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QNET Messages

Error Message     
 
    
    
   

%OS-QNET-7-SIO_Q_PROD q_produce for QNET tx failed, rc = [dec]

Explanation    could not send pkt to fabric driver.

Recommended Action    This should not occur in normal conditions