Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
Line Card (LC) Messages
Downloads: This chapterpdf (PDF - 151.0KB) The complete bookPDF (PDF - 2.03MB) | Feedback

Line Card Messages

Table Of Contents

Line Card Messages

FAULT_MGR Messages

GSR_FIB_STATS_API Messages

GSR_IPV4_EA Messages

GSR_IPv6_EA Messages

GSR_MPLS_EA Messages


Line Card Messages


This section contains all Line Card related System Error Messages. The following facility codes are represented in this module:

FAULT_MGR Messages

GSR_FIB_STATS_API Messages

GSR_IPV4_EA Messages

GSR_IPv6_EA Messages

GSR_MPLS_EA Messages

FAULT_MGR Messages

Error Message     
 
    
    
   

%LC-FAULT_MGR-3-INIT_ERROR Process Initialization Failed: ([chars]%s)

Explanation    The fault-mgr process failed to initialize. This process controls all ASIC resets on all LC's for either internal ASIC problems or larger system issues (ie, fabric control). %s - indicates the reason for the failure. There are 3 types of possible failures, these include: - Checkpointing initialization/creation/restore - Server initialization - Client initialization %s - is the decoded error reason

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process fault_mgr location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart fault_mgr location 0/x/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%LC-FAULT_MGR-3-MSG_ERROR ERROR while ([chars]%s)

Explanation    This ios_msg can be used for all kinds of error %s - indicates where the error occured %s - why the error occured

Recommended Action    Execute 'show process fault_mgr location 0/x/cpu0' to verify that the process is up and running. If it is still non-operational, try doing 'process restart fault_mgr location 0/x/cpu0' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSR_FIB_STATS_API Messages

Error Message     
 
    
    
   

%LC-GSR_FIB_STATS_API-3-ERROR [chars], error [dec] ([chars])

Explanation    Failed to perform the action specified in the error message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

GSR_IPV4_EA Messages

Error Message     
 
    
    
   

%LC-GSR_IPV4_EA-3-ERROR [chars], error [chars]

Explanation    This is an error message in the c12000 platform specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSR_IPv6_EA Messages

Error Message     
 
    
    
   

%LC-GSR_IPv6_EA-3-ERROR [chars], error [chars]

Explanation    This is an error message in the c12000 platform specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur. %s - indicates the reason for the failure. %s - is the decoded error reason.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

GSR_MPLS_EA Messages

Error Message     
 
    
    
   

%LC-GSR_MPLS_EA-3-ERROR [chars], error [chars]

Explanation    Failed to perform the action specified in the error message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'